Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

238 lines
7.7 KiB
Plaintext

This is the trap definition directory. The files located in this
directory list traps that are supported by cisco products.
Files that end in the .trap extension are SunNet Manager (SNM) trap
definition files. They should be added to the snmp.trap file normally
found in /var/adm/snm.
The following is a list of directories which are in this directory.
The file you're reading is the one named "README", in directory
pub/mibs/traps.
===========================================================================
ACCOUNTING-CONTROL-MIB.traps
SNM trap file for traps defined in the ATM Accounting Control MIB,
from draft-ietf-atommib-acct-04.txt
BGP4-MIB.traps
SNM trap file for traps defined in the BGP-4 MIB from RFC1657.
BRIDGE-MIB.traps
SNM trap file for traps defined in the Bridge MIB from RFC 1493.
CAT2600-MIB.traps
SNM trap file for traps defined in the Catalyst 2600 Token Ring
switch MIB.
CISCO-5800-HEALTH-MON-MIB.traps
SNM trap file for traps defined in the Cisco 5800 Health Mon MIB.
CISCO-90-MIB.traps
SNM trap file for traps defined in the Cisco 90i Series MIB.
CISCO-ACCESS-ENVMON-MIB.traps
The SNM trap file for traps deined in the Cisco Access routers
Environment Monitor MIB.
CISCO-ATM-DUAL-PHY-MIB.traps
SNM trap file for traps defined in the Cisco ATM Dual Phy MIB.
CISCO-BSTUN-MIB.traps
SNM trap file for traps defined in the Cisco MIB for the Blocked
Serial Tunneling protocol used to tunnel blocked serial protocols
(e.g. BSC) between two Cisco routers.
CISCO-C2900-MIB.traps
SNM trap file for traps defined in the Cisco Catalyst 2900 MIB.
CISCO-CHANNEL-MIB.traps
SNM trap file for traps defined in the Cisco Channel Interface
Processor MIB, which allows management of the Channel Interface
Processor or CIP.
CISCO-CIPCSNA-MIB.traps
SNM trap file for traps defined in the CISCO-CIPCSNA-MIB,
which allows management of the Cisco Systems Network
Architecture (SNA) support on the Channel Interface Processor
(CIP).
CISCO-CONFIG-MAN-MIB.traps
SNM trap file for traps defined in the CISCO-CONFIG-MAN-MIB,
which allows for observing the overall state of the system
configuration and recording the time and source of changes.
CISCO-DLSW-EXT-MIB.traps
SNM trap file for traps defined in the CISCO-DLSW-EXT-MIB.
This MIB contains extensions to the DLSW-MIB (RFC 2024), including
Traps.
CISCO-DLSW-MIB.traps
SNM trap file for traps defined in the CISCO-DLSW-MIB. This
MIB is used for managing the Data Link Switching protocol.
CISCO-DSP-MGMT-MIB.traps
SNM trap file for traps defined in the CISCO-DSP-MGMT-MIB.
CISCO-DSPU-MIB.traps
SNM trap file for traps defined in the MIB for Cisco DownStream
Physical Unit (DSPU).
CISCO-ENVMON-MIB.traps
SNM trap file for traps defined in the Cisco Environmental Monitor
MIB. Used to describe the status of the Environmental Monitor on
those Cisco devices which support one.
CISCO-FASTHUB-MIB.traps
SNM trap file for the traps defined in the CISCO-FASTHUB-MIB,
a management MIB for the FastHub product family consisting of
the FastHub 116T+ and 116C+, as well as the FastHub 316T and
316C.
CISCO-FLASH-MIB.traps
SNM trap file for traps defined in the Cisco Flash Memory MIB,
extracted from the IOS 10.0 monolithic MIB.
CISCO-GENERAL-TRAPS.traps
SNM trap file for the traps defined in CISCO-GENERAL-TRAPS.my.
CISCO-ICSUDSU-MIB.traps
The SNM trap file for the traps defined in the Cisco
Integrated CSU/DSU MIB.
CISCO-IP-ENCRYPTION-MIB.traps
The SNM trap file for the traps defined in the Cisco IP
Encryption MIB.
CISCO-ISDN-MIB.traps
SNM trap file for the traps defined in the Cisco ISDNU IF MIB.Used to
describe the status of the ISDN Interfaces on the Cisco devices.
CISCO-ISDNU-IF-MIB.traps
SNM trap file for the traps defined in the Cisco ISDN MIB. Used
for the management of Cisco Low end routers (1600) Integrated
ISDN U interface.
CISCO-OAM-MIB.traps
SNM trap file for the traps defined in the CISCO OAM MIB,
which is used for invoking OAM loopback Ping on ATM
connections.
CISCO-PING-MIB.traps
SNM trap file for the traps defined in the Cisco Ping MIB, which
allows multi-protocol pings to be performed via SNMP.
CISCO-REPEATER-MIB.traps
SNM trap file for the traps defined in the Cisco Repeater MIB,
which provides an extension to the rptrPortTable group defined
in RFC1516.
CISCO-RHINO-MIB.traps
SNM trap file for the traps defined in the Cisco Rhino MIB,
which is an interim Chassis MIB for the LS1010 ATM switch.
CISCO-RSRB-MIB.traps
SNM trap file for the traps defined in the Cisco Remote Source Route
Bridging MIB, used to describe the RSRB configuration, status, and
statistics of the Cisco device.
CISCO-RTTMON-MIB.traps
SNM trap file for the traps defined in the Cisco Round Trip Time
(RTT) MIB, used to monitor RTTs to various target destinations.
CISCO-SNA-LLC-MIB.traps
SNM trap file for the traps defined in the Cisco Systems
Network Architecture (SNA) LLC MIB, used to manage LLC devices.
CISCO-SDLLC-MIB.traps
SNM trap file for the traps defined in the Cisco SDLC to LLC2 Media
Translation MIB, used to describe the SDLLC configuration and status
of the Cisco device.
CISCO-STACK-MIB.traps
SNM trap file for the traps defined in the ASN.1 description of
Cisco-specific MIB variables for Cisco's Catalyst concentrators and
switches (CISCO-STACK-MIB).
CISCO-STP-EXTENSIONS-MIB.traps
SNM trap file for the traps defined in the Cisco STP Extensions MIB
for managing Cisco extensions to the 802.1D Spanning Tree
Protocol (STP).
CISCO-STUN-MIB.traps
SNM trap file for the traps defined in the Cisco Serial Tunneling
MIB, used to describe the STUN configuration, status, and
statistics of the Cisco device.
CISCO-SYSLOG-MIB.traps
SNM trap file for the traps defined in the Cisco Syslog MIB,
used to monitor and store logging messages.
CISCO-VLAN-MEMBERSHIP-MIB.traps
SNM trap file for the traps defined in the Cisco Vlan
Membership MIB.
CISCO-VOICE-DIAL-CONTROL-MIB.traps
SNM trap file for the traps defined in the
CISCO-VOICE-DIAL-CONTROL-MIB.
CISCO-VTP-MIB.traps
SNM trap file for the traps defined in the Cisco VTP MIB.
DIAL-CONTROL-MIB.traps
SNM trap file for the traps defined in the DIAL-CONTROL-MIB.
DLSW-MIB.traps
SNM trap file for the traps defined in the DLSW MIB. This Data
Link Switching MIB extracted from RFC-2024.
ENTITY-MIB.traps
SNM trap file for the traps defined in the ENTITY MIB from RFC 2037.
ESSWITCH-MIB.traps
SNM trap file for the traps defined in the EtherSwitch MIB.
IF-MIB.traps
SNM trap file for the traps defined in the combined Interface Type
(IANAifType-MIB) and Interface (IF-MIB) MIB from RFC 1573
MADGERSW-MIB.traps
SNM trap file for the traps defined in the MADGERSW-MIB, which
allows management of the Madge Smart Ringswitch products (including
the Cisco Catalyst 1600 product)
NOVELL-IPX-MIB.traps
SNM trap file for the traps defined in the IPX MIB distributed as
a part of the Novell NetWare Link Services Protocol (NLSP)
Specification 1.0, Novell Part Number 100-001708-002, 2nd
Edition Feb '94.
RFC1315-MIB.traps
SNM trap file for the traps defined in the Frame Relay MIB from RFC
1315.
RFC1382-MIB.traps
SNM trap file for the traps defined in the X.25 Packet Layer MIB
from RFC 1382.
RMON-MIB.traps
SNM trap file for the traps defined in the RMON MIB from RFC 1757.
RSVP-MIB.traps
SNM trap file for the traps defined in the Cisco RSVP MIB.
SNA-NAU-MIB.traps
SNM trap file for the traps defined in the SNA NAU MIB from RFC 1666.
SNA-SDLC-MIB.traps
SNM trap file for the traps defined in the SDLC MIB.
SNMP-REPEATER-MIB.traps
SNM trap file for the traps defined in the Hub MIB from RFC 1516.
SNMPv2-MIB.traps
SNM trap file for the generic SNMP traps
VIPER-MIB.traps
SNM trap file for the traps defined in Cisco Catalyst 3000 series
enterprise MIB.