This is the trap definition directory.  The files located in this 
directory list traps that are supported by cisco products.

Files that end in the .trap extension are SunNet Manager (SNM) trap
definition files.  They should be added to the snmp.trap file normally
found in /var/adm/snm.

The following is a list of directories which are in this directory.
The file you're reading is the one named "README", in directory
pub/mibs/traps.

===========================================================================
ACCOUNTING-CONTROL-MIB.traps
        SNM trap file for traps defined in the ATM Accounting Control MIB, 
        from draft-ietf-atommib-acct-04.txt

BGP4-MIB.traps
	SNM trap file for traps defined in the BGP-4 MIB from RFC1657.

BRIDGE-MIB.traps
	SNM trap file for traps defined in the Bridge MIB from RFC 1493.

CAT2600-MIB.traps
	SNM trap file for traps defined in the Catalyst 2600 Token Ring
	switch MIB.

CISCO-5800-HEALTH-MON-MIB.traps
	SNM trap file for traps defined in the Cisco 5800 Health Mon MIB.

CISCO-90-MIB.traps
        SNM trap file for traps defined in the Cisco 90i Series MIB.
 
CISCO-ACCESS-ENVMON-MIB.traps
	The SNM trap file for traps deined in the Cisco Access routers
	Environment Monitor MIB.

CISCO-ATM-DUAL-PHY-MIB.traps
	SNM trap file for traps defined in the Cisco ATM Dual Phy MIB.

CISCO-BSTUN-MIB.traps
	SNM trap file for traps defined in the Cisco MIB for the Blocked 
	Serial Tunneling protocol used to tunnel blocked serial protocols 
	(e.g. BSC) between two Cisco routers.

CISCO-C2900-MIB.traps
	SNM trap file for traps defined in the Cisco Catalyst 2900 MIB.

CISCO-CHANNEL-MIB.traps
	SNM trap file for traps defined in the Cisco Channel Interface 
	Processor MIB, which allows management of the Channel Interface 
	Processor or CIP.

CISCO-CIPCSNA-MIB.traps
	SNM trap file for traps defined in the CISCO-CIPCSNA-MIB,
	which allows management of the Cisco Systems Network
	Architecture (SNA) support on the Channel Interface Processor
	(CIP).

CISCO-CONFIG-MAN-MIB.traps
	SNM trap file for traps defined in the CISCO-CONFIG-MAN-MIB,
	which allows for observing the overall state of the system
	configuration and recording the time and source of changes.

CISCO-DLSW-EXT-MIB.traps
	SNM trap file for traps defined in the CISCO-DLSW-EXT-MIB.
	This MIB contains extensions to the DLSW-MIB (RFC 2024), including
	Traps.

CISCO-DLSW-MIB.traps
	SNM trap file for traps defined in the CISCO-DLSW-MIB. This
	MIB is used for managing the Data Link Switching protocol.

CISCO-DSP-MGMT-MIB.traps
	SNM trap file for traps defined in the CISCO-DSP-MGMT-MIB.

CISCO-DSPU-MIB.traps
	SNM trap file for traps defined in the MIB for Cisco DownStream 
	Physical Unit (DSPU).

CISCO-ENVMON-MIB.traps
	SNM trap file for traps defined in the Cisco Environmental Monitor
	MIB.  Used to describe the status of the Environmental Monitor on
	those Cisco devices which support one.

CISCO-FASTHUB-MIB.traps
	SNM trap file for the traps defined in the CISCO-FASTHUB-MIB,
	a management MIB for the FastHub product family consisting of
	the FastHub 116T+ and 116C+, as well as the FastHub 316T and
	316C.

CISCO-FLASH-MIB.traps
	SNM trap file for traps defined in the Cisco Flash Memory MIB, 
	extracted from the IOS 10.0 monolithic MIB.

CISCO-GENERAL-TRAPS.traps
	SNM trap file for the traps defined in CISCO-GENERAL-TRAPS.my.

CISCO-ICSUDSU-MIB.traps
	The SNM trap file for the traps defined in the Cisco
	Integrated CSU/DSU MIB.

CISCO-IP-ENCRYPTION-MIB.traps
	The SNM trap file for the traps defined in the Cisco IP
	Encryption MIB.

CISCO-ISDN-MIB.traps
	SNM trap file for the traps defined in the Cisco ISDNU IF MIB.Used to 
	describe the status of the ISDN Interfaces on the Cisco devices.

CISCO-ISDNU-IF-MIB.traps
	SNM trap file for the traps defined in the Cisco ISDN MIB. Used
	for the management of Cisco Low end routers (1600) Integrated
	ISDN U interface.

CISCO-OAM-MIB.traps
	SNM trap file for the traps defined in the CISCO OAM MIB,
	which is used for invoking OAM loopback Ping on ATM
	connections.

CISCO-PING-MIB.traps
	SNM trap file for the traps defined in the Cisco Ping MIB, which 
	allows multi-protocol pings to be performed via SNMP.  
 
CISCO-REPEATER-MIB.traps
	SNM trap file for the traps defined in the Cisco Repeater MIB,
	which provides an extension to the rptrPortTable group defined 
	in RFC1516.

CISCO-RHINO-MIB.traps
	SNM trap file for the traps defined in the Cisco Rhino MIB,
	which is an interim Chassis MIB for the LS1010 ATM switch.

CISCO-RSRB-MIB.traps
	SNM trap file for the traps defined in the Cisco Remote Source Route 
	Bridging MIB, used to describe the RSRB configuration, status, and 
	statistics of the Cisco device.

CISCO-RTTMON-MIB.traps
	SNM trap file for the traps defined in the Cisco Round Trip Time
	(RTT) MIB, used to monitor RTTs to various target destinations.

CISCO-SNA-LLC-MIB.traps
	SNM trap file for the traps defined in the Cisco Systems
	Network Architecture (SNA) LLC MIB, used to manage LLC devices.

CISCO-SDLLC-MIB.traps
	SNM trap file for the traps defined in the Cisco SDLC to LLC2 Media 
	Translation MIB, used to describe the SDLLC configuration and status 
	of the Cisco device.

CISCO-STACK-MIB.traps
	SNM trap file for the traps defined in the ASN.1 description of 
	Cisco-specific MIB variables for Cisco's Catalyst concentrators and 
	switches (CISCO-STACK-MIB).

CISCO-STP-EXTENSIONS-MIB.traps
        SNM trap file for the traps defined in the Cisco STP Extensions MIB
	for managing Cisco extensions to the 802.1D Spanning Tree
        Protocol (STP).

CISCO-STUN-MIB.traps
	SNM trap file for the traps defined in the Cisco Serial Tunneling 
	MIB, used to describe the STUN configuration, status, and 
	statistics of the Cisco device.

CISCO-SYSLOG-MIB.traps
	SNM trap file for the traps defined in the Cisco Syslog MIB,
	used to monitor and store logging messages.

CISCO-VLAN-MEMBERSHIP-MIB.traps
	SNM trap file for the traps defined in the Cisco Vlan
	Membership MIB.

CISCO-VOICE-DIAL-CONTROL-MIB.traps
	SNM trap file for the traps defined in the 
	CISCO-VOICE-DIAL-CONTROL-MIB.

CISCO-VTP-MIB.traps
	SNM trap file for the traps defined in the Cisco VTP MIB.

DIAL-CONTROL-MIB.traps
	SNM trap file for the traps defined in the DIAL-CONTROL-MIB.

DLSW-MIB.traps
	SNM trap file for the traps defined in the DLSW MIB. This Data
	Link Switching MIB extracted from RFC-2024.

ENTITY-MIB.traps
	SNM trap file for the traps defined in the ENTITY MIB from RFC 2037.

ESSWITCH-MIB.traps
	SNM trap file for the traps defined in the EtherSwitch MIB.

IF-MIB.traps
	SNM trap file for the traps defined in the combined Interface Type 
	(IANAifType-MIB) and Interface (IF-MIB) MIB from RFC 1573

MADGERSW-MIB.traps
	SNM trap file for the traps defined in the MADGERSW-MIB, which
	allows management of the Madge Smart Ringswitch products (including
	the Cisco Catalyst 1600 product)

NOVELL-IPX-MIB.traps
	SNM trap file for the traps defined in the IPX MIB distributed as
        a part of the Novell NetWare Link Services Protocol (NLSP)
        Specification 1.0, Novell Part Number 100-001708-002, 2nd
        Edition Feb '94.

RFC1315-MIB.traps
	SNM trap file for the traps defined in the Frame Relay MIB from RFC 
	1315.

RFC1382-MIB.traps
	SNM trap file for the traps defined in the X.25 Packet Layer MIB 
	from RFC 1382.

RMON-MIB.traps
	SNM trap file for the traps defined in the RMON MIB from RFC 1757.

RSVP-MIB.traps
	SNM trap file for the traps defined in the Cisco RSVP MIB.

SNA-NAU-MIB.traps
	SNM trap file for the traps defined in the SNA NAU MIB from RFC 1666.

SNA-SDLC-MIB.traps
	SNM trap file for the traps defined in the SDLC MIB.

SNMP-REPEATER-MIB.traps
	SNM trap file for the traps defined in the Hub MIB from RFC 1516.

SNMPv2-MIB.traps
	SNM trap file for the generic SNMP traps

VIPER-MIB.traps
	SNM trap file for the traps defined in  Cisco Catalyst 3000 series 
        enterprise MIB.