Replaced spaces with dashes on two files. These files may have been causing issues with SNMP commands.

2025-04-09 13:01:50 +00:00 · 2016-12-20 15:54:03 -07:00 · 2016-12-20 15:54:03 -07:00 · 7bf781019c
commit 7bf781019c
parent 734e2dcf3a
2 changed files with 154 additions and 0 deletions
--- a/snmp_mib_archive/GbE-mib-descriptions.txt
+++ b/snmp_mib_archive/GbE-mib-descriptions.txt
@ -0,0 +1,99 @@
+ProLiant GbE Interconnect Switch SNMP MIB Errata
+
+The following are not supported in the MIB:
+
+RFC1213
+1. At ::= { mib-2 3 }
+2. Egp ::= { mib-2 8 }
+3. Transmission ::= { mib-2 10 }
+
+RFC1215
+1. EgpNeighborLoss
+
+RFC1493
+1. dot1dStatic ::= { dot1dBridge 5 }
+2. dot1dTpFdbTable only applies to Default VLAN 1.
+3. dot1dTpFdbTable ::= { dot1dTp 3 }
+
+RFC1757 (RMON)
+1. Hosts
+2. HostTopN
+3. Matrix
+4. Filter
+5. capture
+
+RFC2233 (IF-MIB)
+1. ifRcvAddressTable ::= { ifMIBObjects 4 }
+2. ifTestTable ::= { ifMIBObjects 3 }
+
+
+RFC2358 (Ethernet-Like MIB)
+1. dot3StatsSQETestErrors ::= { dot3StatsEntry 6 }
+2. dot3StatsInternalMacTransmitErrors ::= { dot3StatsEntry 10 }
+3. dot3StatsInternalMacReceiveErrors ::= { dot3StatsEntry 16 }
+4. dot3CollTable ::= { dot3 5 }
+5. dot3TestTdr ::= { dot3Tests 1 }
+6. dot3StatsMultipleCollisionFrames ::= { dot3StatsEntry 5 }
+7. dot3StatsSQETestErrors ::= { dot3StatsEntry 6 }
+8. dot3StatsInternalMacTransmitErrors ::= { dot3StatsEntry 10 }
+9. dot3StatsCarrierSenseErrors ::= { dot3StatsEntry 11 }
+10. dot3StatsFrameTooLongs ::= { dot3StatsEntry 13 }
+11. dot3StatsInternalMacReceiveErrors ::= { dot3StatsEntry 16 }
+12. dot3StatsEtherChipSet ::= { dot3StatsEntry 17 }
+13. dot3StatsSymbolErrors ::= { dot3StatsEntry 18 }
+14. dot3CollTable :: = { dot3 5 }
+15. dot3Tests :: = { dot3 6 }
+16. dot3Errors := {dot3 7 }
+17. dot3ChipSets := {dot3 8 }
+18. dot3StatsTable: dot3StatsEntry supports only the port interfaces.
+
+RFC2674
+1. pBridgeMIB ::= { dot1dBridge 6 }
+* dot1dGmrp ::= { pBridgeMIBObjects 4 }
+* dot1dUserPriorityRegenTable ::= { dot1dPriority 2 } is read-only.
+* dot1dTrafficClassesEnabled ::= { dot1dExtBase 2 } is always true.
+* dot1dGmrpStatus ::= { dot1dExtBase 3 } is always disabled.
+2. qBridgeMIB ::= { dot1dBridge 7 }
+* dot1qForwardAllTable ::= { dot1qTp 4 }
+* dot1qForwardUnregisteredTable ::= { dot1qTp 5 }
+* dot1qPortVlanStatisticsTable ::= { dot1qVlan 6 }
+* dot1qPortVlanHCStatisticsTable ::= { dot1qVlan 7 }
+* dot1qLearningConstraintsTable ::= { dot1qVlan 8 }
+* dot1qConstraintSetDefault ::= { dot1qVlan 9 }
+* dot1qConstraintTypeDefault ::= { dot1qVlan 10 }
+3. dot1qStaticUnicastReceivePort ::= { dot1qStaticUnicastEntry 2 } always has to be 0.
+4. dot1qStaticMulticastReceivePort ::= { dot1qStaticMulticastEntry 2 } always has to be 0.
+5. dot1qStaticMulticastForbiddenEgressPorts ::= { dot1qStaticMulticastEntry 4 }  always has to be 0.
+6. dot1qNextFreeLocalVlanIndex ::= { dot1qVlan 4 } always has to be 0.
+7. dot1qStaticUnicastStatus and dot1qStaticMulticastStatus support setting value only to invalid(2), permanent(3), and deleteOnReset(4).
+
+RFC2737 (Entity MIB)
+1. entPhysicalModelName ::= { entPhysicalEntry 13 }
+
+cpqAgent.mib - Common MIB for Basic Config
+The following objects are defined as read-write/read-create, but we don't support write on these objects:
+
+1. agentBscSwFileIndex
+2. agentBscSwFileDscr
+3. agentBscSwFileTransferType
+4. agentBscSwFileLocateId
+5. agentFileTransfer
+6. agentRs232PortConfig -  read/write allowed on pGbE
+7. agentOutOfBandBaudRateConfig- read/write/allowed on pGbE
+8. agentBscSwFileIndex
+9. agentBscSwFileDscr
+10. agentBscSwFileTransferType
+11. agentBscSwFileLocateId 
+12. agentFileTransfer
+
+
+These traps are generated:
+
+	coldStart 
+	warmStart 
+	authenticationFailure 
+	topologyChange
+	newRoot 
+	linkDown 
+	linkUp
+	entConfigChange
--- a/snmp_mib_archive/Gbe2-mib-descriptions.txt
+++ b/snmp_mib_archive/Gbe2-mib-descriptions.txt
@ -0,0 +1,55 @@
+
+		GbE2 MIB definitions
+
+			v1.0
+
+
+bt2Network.mib
+Layer 3 configs/stats/info, including IP interface, gateway, and DNS.
+
+bt2Physical.mib
+Layer 2 config/stats/info, including VLAN, trunk groups, 
+Spanning tree configuration, Port mirroring, and FDB table. 
+
+bt2Switch.mib
+General switch config/info, including stats, system info, 
+port config, radius, NTP, syslog, traphost, TFTP, hardware
+info, and stats. 
+
+bt2trap.mib
+GbE2 trap information
+
+hpswitchpl.mib
+HP MIB root file definition for BladeType2
+
+rfc1213.mib
+MIB-II for Network Management of TCP/IP based internets.
+L3 IP information/data. 
+
+rfc1215.mib
+Coldstart, warmstart, linkup trap definitions.
+
+rfc1493.mib
+Bridge Traps, standard spanning tree and other L2 switch data.
+
+rfc1643.mib
+Ethernet-like MIB, L2 frame statistics and related information
+
+rfc1757.mib
+Remote Network Monitoring (RMON) MIB
+
+rfc2037.mib
+SNMP Network Management Entity MIB for use with Multiple STP 
+
+
+----------------------------------------------------------------------------
+
+Hewlett-Packard Company shall not be liable for technical or editorial errors
+or omissions contained herein. The information in this document is provided 
+"as is" without warranty of any kind and is subject to change without notice.
+The warranties for HP products are set forth in the express limited warranty 
+statements accompanying such products. Nothing herein should be construed as 
+constituting an additional warranty.
+
+
+(c) 2002, 2003 Hewlett-Packard Development Company, L.P.