MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WIRELESS-P2MP-PHY-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1556 lines
54 KiB
Plaintext
Raw Blame History

-- **************************************************************************
-- CISCO-WIRELESS-P2MP-PHY-MIB.my: Cisco Wireless Radio Point to
-- MultiPoint MIB.
--
-- January 2000, Allan Figueredo
--
-- Copyright (c) 2000 by Cisco Systems, Inc.
-- All rights reserved.
--
-- **************************************************************************
--
-- **************************************************************************
--
--
--
-- 1.0 Glossary
--
-- The following terms are used in the MIB definitions below.
--
-- Radio Interface: The radio interface that provides wireless communication
-- features.
-- Radio Link: The bi-directional wireless link that exists between two
-- communicating wireless radios.
-- Radio PHY: Represents the transmission characteristics of the Radio
-- Link.
-- RF Unit: The Radio Frequency components and associated antennas.
-- ALC: Automatic Line Control
-- SU: Subscriber Unit
--
--
-- 2.0 Cisco Wireless MIB Organization
--
-- The Cisco Wireless Point to Multipoint Radio PHY MIB is divided into 3 main
-- groups.
-- Radio Base Objects in this group are present on the Head end and
-- also the Subscriber unit.
-- Head End Objects in this group are only supported on the Head end.
-- Subscriber Objects in this group are only supported on the Subscriber
-- unit.
--
-- 2.1 Radio Base
--
-- This group is supported on the head end as well as the subscriber unit.
-- It consists of the following groups.
--
-- o. PHY (physical) Config
-- This group allows the user to configure self-test, cable loss,
-- external reference clock, enable diversity antenna, etc.
--
-- o. Frequency Resource
-- This contains information about the Radio frequency transmission
-- and reception resources available on the system. This group
-- determines the portions of the radio spectrum at which the radio
-- subsystem can operate.
--
-- o. Test Group
-- This provides facilities to establish loopback at various points
-- in the hardware for diagnostic purposes.
--
-- o. Notification Group
-- It provides the list of traps that the wireless system will
-- generate. The traps defined in this group are common to both
-- the Head end and the subscriber unit.
--
-- 2.2 Head End
--
-- This group of objects are only supported on the head end and lets the
-- user configure the Automatic Line Control (ALC). It also provides
-- information about the state of the Intermediate Frequency module.
--
-- 2.3 Subscriber Unit
--
-- This group of objects are only supported on the subscriber unit.
-- They enable the user enable/disable transmission at the subscriber end,
-- and track the power measured at the different possible center
-- frequencies at power up.
--
--
-- 3.0 MIB Definitions
--
--
CISCO-WIRELESS-P2MP-PHY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
DisplayString, TruthValue
FROM SNMPv2-TC
-- MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
CwrOscState, CwrRfType, CwrRfFreqRange
FROM CISCO-WIRELESS-TC-MIB
Unsigned32
FROM CISCO-TC
entPhysicalIndex
FROM ENTITY-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoWirelessPhyMIB MODULE-IDENTITY
LAST-UPDATED "200010221910Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: wireless-nms@cisco.com"
DESCRIPTION
"This is the MIB Module for the Cisco Wireless Radio
Point to MultiPoint interface."
REVISION "200010221910Z"
DESCRIPTION
"Changed propWirelessDocsMAC to
propDocsWirelessMaclayer"
REVISION "200010041910Z"
DESCRIPTION
"Fixed minor typo in spelling of Duplexer
Changed valid range for p2mpSuMeasuredPower"
REVISION "200007211910Z"
DESCRIPTION
"Redefined p2mpDenyService
Redefined p2mpLoopbackTable
Added a second index for p2mpSuPowerScanTable"
::= { ciscoMgmt 170}
--
-- The Cisco Wireless P2MP Radio MIB Tree
--
p2mpRadioObjects OBJECT IDENTIFIER ::= { ciscoWirelessPhyMIB 1 }
p2mpRadioBaseObjects OBJECT IDENTIFIER ::= { p2mpRadioObjects 1 }
p2mpRadioSuObjects OBJECT IDENTIFIER ::= { p2mpRadioObjects 2 }
p2mpRadioHeObjects OBJECT IDENTIFIER ::= { p2mpRadioObjects 3 }
p2mpPhyConfigGroup OBJECT IDENTIFIER ::= { p2mpRadioBaseObjects 1 }
p2mpFreqResourceGroup OBJECT IDENTIFIER ::= { p2mpRadioBaseObjects 2 }
p2mpRadioTestGroup OBJECT IDENTIFIER ::= { p2mpRadioBaseObjects 3 }
p2mpLedGroup OBJECT IDENTIFIER ::= { p2mpRadioBaseObjects 4 }
--
--
p2mpRadioPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpRadioPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides facilities to configure the physical
layer characteristics of the radio link.
The objects in this table are supported on the head end and
at the subscriber unit."
::= { p2mpPhyConfigGroup 1 }
p2mpRadioPhyEntry OBJECT-TYPE
SYNTAX P2mpRadioPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of this table is created when the managed system
detects a propDocsWirelessMaclayer interface. The entry
is removed when the associated propDocsWirelessMaclayer
interface is deleted from the ifTable."
INDEX { ifIndex }
::= { p2mpRadioPhyTable 1 }
P2mpRadioPhyEntry ::= SEQUENCE {
p2mpSelfTest TruthValue,
p2mpDiversityAntennaPresent TruthValue,
p2mpCableLoss Unsigned32,
p2mpCableLossDiversity Unsigned32,
p2mpClockRefExt TruthValue,
p2mpDenyService TruthValue,
p2mpCommonTrapEnable TruthValue,
p2mpLastPhyFailureType INTEGER,
p2mpLastPhyFailureReason DisplayString
}
p2mpSelfTest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable self test. When set to
true(1), the software tests the memory and hardware integrity
shortly after the router powers up."
::= { p2mpRadioPhyEntry 1 }
p2mpDiversityAntennaPresent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When true(1), this object indicates that a diversity
antenna is being used to receive the wireless transmissions.
When false(2), the radio system is using a single antenna
to transmit and receive."
::= { p2mpRadioPhyEntry 2 }
p2mpCableLoss OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the measured signal power loss in dB
due to the cable connecting the radio to the main antenna.
The hardware compensates for this cable loss by adjusting the
receive and transmit gain appropriately. A value of 0
indicates no degradation in the signal due to the cable. The
radio hardware can compensate for a cable loss of no more
than 15 db.
This cable loss applies to the main antenna only."
::= { p2mpRadioPhyEntry 3 }
p2mpCableLossDiversity OBJECT-TYPE
SYNTAX Unsigned32 (0..15)
UNITS "dB"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the measured signal power loss in dB
due to the cable connecting the radio to the diversity
antenna. The hardware compensates for this loss by adjusting
the receive and transmit gain appropriately. A value of 0
indicates no degradation in the signal due to the cable. The
radio hardware can compensate for a cable loss of no more
than 15 dB.
This cable loss applies to the diversity antenna only."
::= { p2mpRadioPhyEntry 4 }
p2mpDenyService OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the service is disabled in the unit.
For Head-end unit, if this object has the value of
'true', the link is in loopback mode; otherwise the
link is enabled for transmitting / receiving data.
For Subscriber unit, if this object has the value of
'true', the subscriber unit service is disabled;
otherwise, the subscriber unit is enabled for
transmitting / receiving data"
::= { p2mpRadioPhyEntry 5 }
p2mpClockRefExt OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object controls the use of external reference
clock for IF module as follows:
'true(1)' - an external reference clock is used
'false(2)' - an internal reference clock is used."
::= { p2mpRadioPhyEntry 6 }
p2mpCommonTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true(1), the notifications common to the head end
and subscriber unit are enabled. When set to false(2), these
notifications are disabled.
The notification controlled by this object are:
- p2mpRadioPhyFailNotification
- p2mpTrapRfSupplyVoltage
- p2mpTrapRfRxOsc
- p2mpTrapRfTxOsc
- p2mpTrapRfTemp
- p2mpTrapRfCommLinkError
- p2mpTrapTxPower
- p2mpTrapRfStatusChange"
DEFVAL { true }
::= { p2mpRadioPhyEntry 7 }
p2mpLastPhyFailureType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
p2mpHwConfigUnsupported(2),
p2mpHwConfigMismatch(3),
p2mpHwInitFailure(4),
p2mpHostIfCommLinkError(5),
p2mpAutoCableCompFailure(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last physical link failure that
resulted in a p2mpRadioPhyFailNotification trap.
none(1) - no failure
p2mpHwConfigUnsupported(2) - The radio subsystem has
detected that the configuration requested is not
supported by the hardware. The p2mpLastPhyFailureReason
variable will indicate which configuration parameter is
not supported.
p2mpHwConfigMismatch(3) - The radio subsystem has detected
that the combination of the configuration parameters
requested is inconsistent and cannot be supported.
The p2mpLastPhyFailReason variable will indicate the
configuration parameter that causes the mismatch.
p2mpHwInitFailure(4) - The radio subsystem has failed to
initialize the hardware. This implies that there is a
critical error condition in the associated hardware.
The p2mpLastPhyFailReason specifies the reason why the
init failed.
p2mpHostIfCommLinkError(5) - The host could not communicate
with the IF module.
p2mpAutoCableCompFailure(6) - Failed to achieve automatic
cable compensation due to loss of Tx signal."
::= { p2mpRadioPhyEntry 8 }
p2mpLastPhyFailureReason OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a text string that describes the last physical link
failure identified by p2mpLastPhyFailureType."
::= { p2mpRadioPhyEntry 9 }
--
-- Frequency Resource Group
--
-- This group is supported on the head end and at the subscriber unit.
--
--
p2mpRfTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpRfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the state of the radio
frequency resources used by the radio system.
Physically each RF resource may be realized by one antenna and
its associated control hardware. A single antenna and its
associated electronics may act as more than 1 RF resource. When
an RF resource acts as both a transmit and receive resource,
the transmit and receive frequency ranges may overlap."
::= { p2mpFreqResourceGroup 1 }
p2mpRfEntry OBJECT-TYPE
SYNTAX P2mpRfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents one entry in the p2mpRfTable.
An entry is created in this table when the managed system
detects a RF resource. The entry is removed when the RF
resource is removed from the wireless system."
INDEX { ifIndex, p2mpRfIndex }
::= { p2mpRfTable 1 }
P2mpRfEntry ::= SEQUENCE {
p2mpRfIndex Integer32,
p2mpRfType CwrRfType,
p2mpRfOpMode INTEGER,
p2mpTxFreqRangeMin CwrRfFreqRange,
p2mpTxFreqRangeMax CwrRfFreqRange,
p2mpRxFreqRangeMin CwrRfFreqRange,
p2mpRxFreqRangeMax CwrRfFreqRange,
p2mpMinTxPower Integer32,
p2mpMaxTxPower Integer32,
p2mpRfTemperature Integer32,
p2mpRfTxOscState CwrOscState,
p2mpRfRxOscState CwrOscState,
p2mpRfSupplyVoltageState INTEGER,
p2mpRfStatus INTEGER,
p2mpRfLoopbackSupported TruthValue
}
p2mpRfIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object, along with the ifIndex of the MAC layer,
represents the index of this entry in the p2mpRfTable.
Each entry in the table provides details on the state of
the RF resources available in the system."
::= { p2mpRfEntry 1 }
p2mpRfType OBJECT-TYPE
SYNTAX CwrRfType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the RF resource."
::= { p2mpRfEntry 2 }
p2mpRfOpMode OBJECT-TYPE
SYNTAX INTEGER {
receiveOnly(1),
transmitOnly(2),
transmitAndReceive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether this RF resource can either
transmit, receive, or do both."
::= { p2mpRfEntry 3 }
p2mpTxFreqRangeMin OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the minimum frequency at which this RF
resource can transmit."
::= { p2mpRfEntry 4 }
p2mpTxFreqRangeMax OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum frequency at which this RF
resource can transmit."
::= { p2mpRfEntry 5 }
p2mpRxFreqRangeMin OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the lowest transmission frequency this
RF resource can receive. "
::= { p2mpRfEntry 6 }
p2mpRxFreqRangeMax OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the highest transmission frequency that
this RF resource can receive."
::= { p2mpRfEntry 7 }
p2mpMinTxPower OBJECT-TYPE
SYNTAX Integer32 (-80..50)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the minimum power that the RF subsystem
can supply the antenna. "
::= { p2mpRfEntry 8 }
p2mpMaxTxPower OBJECT-TYPE
SYNTAX Integer32 (-80..50)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum power that the RF subsystem
can supply the antenna."
::= { p2mpRfEntry 9 }
p2mpRfTemperature OBJECT-TYPE
SYNTAX Integer32 (-40..100)
UNITS "Degrees Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the current temperature of the RF unit"
::= { p2mpRfEntry 10 }
p2mpRfTxOscState OBJECT-TYPE
SYNTAX CwrOscState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the state of the transmit oscillator.
The oscillator must be in oscillatorOk(1) state for the system
to function properly."
::= { p2mpRfEntry 11 }
p2mpRfRxOscState OBJECT-TYPE
SYNTAX CwrOscState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the state of the receive oscillator.
The oscillator must be in oscillatorOk(1) state for the system
to function properly."
::= { p2mpRfEntry 12 }
p2mpRfSupplyVoltageState OBJECT-TYPE
SYNTAX INTEGER {
withinSpecification(1),
outsideSpecification(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the voltage supply to the RF
unit is within specifications or not. Voltage specifications
are hardware dependent."
::= { p2mpRfEntry 13 }
p2mpRfStatus OBJECT-TYPE
SYNTAX INTEGER {
online(1),
offline(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies whether the RF resource is functioning
properly. If it is functioning properly then it will be
online(1), else offline(2).
At the Subscriber Unit, this object will reflect offline(2)
if p2mpTxMuteEnable in the p2mpSuRadioPhyTable is true(1)."
::= { p2mpRfEntry 14 }
p2mpRfLoopbackSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates if the RF unit supports loopback.
When true(1), the user can configure loopback using the
objects in p2mpLoopbackTable. When false(2), any attempt
to configure RF loopback will fail. "
::= { p2mpRfEntry 15 }
--
--
p2mpDuplexerTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpDuplexerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the Duplexers
available for use on the system.
A Duplexer is a mechanical device, that acts as a band
pass filter when installed in an RF resource.
Normally a RF resource is capable of operating over a wide
frequency range. To operate at restricted frequencies, the user
has to own that part of the frequency spectrum. Since the user
may not own parts of the frequency spectrum over which the RF
resource may operate, a duplexer is installed at the RF.
This restricts the RF resource to operate in the passband
defined by the duplexer."
::= { p2mpFreqResourceGroup 2 }
p2mpDuplexerEntry OBJECT-TYPE
SYNTAX P2mpDuplexerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents one entry in the p2mpDuplexerTable.
Each entry contains information about the duplexers
capabilities and the associated RF resource.
An entry is created in this table when the managed system
detects a RF resource. The entry is removed when the RF
resource is removed from the wireless system."
INDEX { ifIndex, p2mpDuplexerIndex }
::= { p2mpDuplexerTable 1 }
P2mpDuplexerEntry ::= SEQUENCE {
p2mpDuplexerIndex Integer32,
p2mpDuplexerRF CwrRfType,
p2mpDuplexerLoPassbandMinFreq CwrRfFreqRange,
p2mpDuplexerLoPassbandMaxFreq CwrRfFreqRange,
p2mpDuplexerHiPassbandMinFreq CwrRfFreqRange,
p2mpDuplexerHiPassbandMaxFreq CwrRfFreqRange,
p2mpDuplexerReceivePassband INTEGER,
p2mpDuplexerTxInsertionLoss Integer32,
p2mpDuplexerBurnDate DisplayString
}
p2mpDuplexerIndex OBJECT-TYPE
SYNTAX Integer32 (1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object, along with ifIndex, uniquely identifies
an entry in this table. Each entry contains
information about the duplexer's capabilities and also
identifies the associated RF resource."
::= { p2mpDuplexerEntry 1 }
p2mpDuplexerRF OBJECT-TYPE
SYNTAX CwrRfType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the RF resource associated with this
duplexer."
::= { p2mpDuplexerEntry 2 }
p2mpDuplexerLoPassbandMinFreq OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum frequency in the low
passband that this duplexer will pass through without
attenuation."
::= { p2mpDuplexerEntry 3 }
p2mpDuplexerLoPassbandMaxFreq OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum frequency in the low
passband that this duplexer will pass through without
attenuation."
::= { p2mpDuplexerEntry 4 }
p2mpDuplexerHiPassbandMinFreq OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the minimum frequency in the high
passband that this duplexer will pass through without
attenuation."
::= { p2mpDuplexerEntry 5 }
p2mpDuplexerHiPassbandMaxFreq OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "MHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the maximum frequency in the high
passband that this duplexer will pass through without
attenuation."
::= { p2mpDuplexerEntry 6 }
p2mpDuplexerReceivePassband OBJECT-TYPE
SYNTAX INTEGER {
loPassband(1),
hiPassband(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates which of the two passbands are being used
to receive transmissions. The RF Resource can receive on
either of the duplexer passbands.
loPassband(1) - The RF Resource is receiving on a frequency
in the low passband.
hiPassband(2) - The RF Resource is receiving on a frequency
in the high passband."
::= { p2mpDuplexerEntry 7 }
p2mpDuplexerTxInsertionLoss OBJECT-TYPE
SYNTAX Integer32
UNITS "dB"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the loss in 'dB' that would result in
the transmission path due to the duplexer."
::= { p2mpDuplexerEntry 8 }
p2mpDuplexerBurnDate OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the date when the revision information
was programmed into non-volatile memory."
::= { p2mpDuplexerEntry 9 }
--
--
p2mpAntennaTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the antennas available
in the system."
::= { p2mpFreqResourceGroup 3 }
p2mpAntennaEntry OBJECT-TYPE
SYNTAX P2mpAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is created in this table when the managed system
detects a RF resource. The entry is removed when the RF
resource is removed from the wireless system."
INDEX { ifIndex, p2mpAntennaIndex }
::= { p2mpAntennaTable 1 }
P2mpAntennaEntry ::= SEQUENCE {
p2mpAntennaIndex Unsigned32,
p2mpRfResource CwrRfType,
p2mpAntennaXDim Unsigned32,
p2mpAntennaYDim Unsigned32,
p2mpAntennaType DisplayString,
p2mpAntennaDescr DisplayString,
p2mpAntennaGain Unsigned32,
p2mpAntennaPolarization INTEGER
}
p2mpAntennaIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object, along with ifIndex, represents the index of this
entry in the p2mpAntennaTable."
::= { p2mpAntennaEntry 1 }
p2mpRfResource OBJECT-TYPE
SYNTAX CwrRfType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies if the antenna is connected to the main
or the diversity RF resource."
::= { p2mpAntennaEntry 2 }
p2mpAntennaXDim OBJECT-TYPE
SYNTAX Unsigned32(1..96)
UNITS "Inches"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the dimension of the antenna in the
X direction."
::= { p2mpAntennaEntry 3 }
p2mpAntennaYDim OBJECT-TYPE
SYNTAX Unsigned32 (1..96)
UNITS "Inches"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the dimension of the antenna in the
Y direction."
::= { p2mpAntennaEntry 4 }
p2mpAntennaType OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the antenna type. For example,
'dish-antenna'."
::= { p2mpAntennaEntry 5 }
p2mpAntennaDescr OBJECT-TYPE
SYNTAX DisplayString (SIZE(0..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to describe the antenna. For example,
it could be used to identify the manufacturer like in
'Manufactured by Watkins Johnson'."
::= { p2mpAntennaEntry 6 }
p2mpAntennaGain OBJECT-TYPE
SYNTAX Unsigned32 (0..60)
UNITS "dBi : decibel Isotropic"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the receive and transmit gain
of this antenna."
::= { p2mpAntennaEntry 7 }
p2mpAntennaPolarization OBJECT-TYPE
SYNTAX INTEGER {
vertical(1),
horizontal(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the polarization of the antanna."
::= { p2mpAntennaEntry 8 }
--
-- The Test Group. This group is optional
--
p2mpLoopbackTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides facilities to establish loopback points to
exercise various sections of the hardware."
::= { p2mpRadioTestGroup 1 }
p2mpLoopbackEntry OBJECT-TYPE
SYNTAX P2mpLoopbackEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents one entry in the p2mpLoopbackTable. It
is created when the managed system detects a
propDocsWirelessMaclayer interface. The entry is removed
when the associated propDocsWirelessMaclayer interface
is deleted from the ifTable."
INDEX { ifIndex }
::= { p2mpLoopbackTable 1 }
P2mpLoopbackEntry ::= SEQUENCE {
p2mpLocalLoopbackMode INTEGER,
p2mpLocalLoopbackAntenna CwrRfType,
p2mpLocalLoopbackChannel Unsigned32
}
p2mpLocalLoopbackMode OBJECT-TYPE
SYNTAX INTEGER {
noLoopback(1),
fir(2),
if(3),
rf(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the system in loopback mode
prior to executing some system diagnostic tests. The user
selects the point in the system where the data signal should be
looped back. The diagnostic tests outlined in the user manual
have to be manually executed to determine success or failure.
Once all the tests are completed, normal operation is restored
by setting this object to noLoopback(1).
noLoopback(1) - no loopback
fir(2) - loopback at the Finite Impulse
Response (FIR) module.
if(3) - loopback at the IF module. This
exercises the FIR, and IF modules.
rf(4) - loopback at the RF unit. This
exercises the FIR, IF, and RF modules.
This mode is supported only when
p2mpRfLoopbackSupported is true(1)."
DEFVAL { noLoopback }
::= { p2mpLoopbackEntry 1 }
p2mpLocalLoopbackAntenna OBJECT-TYPE
SYNTAX CwrRfType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the RF resource used for
loopback testing. This object is not applicable for
loopback testing when p2mpLocalLoopbackMode has a
value of 'noLoopback(1)'."
::= { p2mpLoopbackEntry 2 }
p2mpLocalLoopbackChannel OBJECT-TYPE
SYNTAX Unsigned32 (1..7)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object identifies the channel being used to
loopback the data. This object is not applicable
for loopback testing when p2mpLocalLoopbackMode has
a value of 'noLoopback(1)'."
::= { p2mpLoopbackEntry 3 }
--
-- The LED Group.
--
-- This group is supported on the head end and at the subscriber unit.
p2mpLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entity (Light emitting diode) LED information. For each LED on
the entity, an entry will exist in this table, describing the
location and current status of that LED."
::= { p2mpLedGroup 1 }
p2mpLedEntry OBJECT-TYPE
SYNTAX P2mpLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing the LED information.
The entPhysicalIndex identifies the entity on which the LED's
are present."
INDEX { entPhysicalIndex, p2mpLedIndex }
::= { p2mpLedTable 1 }
P2mpLedEntry ::=
SEQUENCE {
p2mpLedIndex Integer32,
p2mpLedType INTEGER,
p2mpLedState INTEGER
}
p2mpLedIndex OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For a given entPhysicalIndex, this index value uniquely
identifies an entry in the p2mpLedTable."
::= { p2mpLedEntry 1 }
p2mpLedType OBJECT-TYPE
SYNTAX INTEGER {
interfaceEnable(0),
majorAlarm(1),
minorAlarm(2),
outOfService(3),
carrier(4),
transmitData(5),
receiveData(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type or label of the LED."
::= { p2mpLedEntry 2 }
p2mpLedState OBJECT-TYPE
SYNTAX INTEGER {
off(0),
green(1),
yellow(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state of the LED."
::= { p2mpLedEntry 3 }
--
-- SUBSCRIBER UNIT ONLY!!!!!
--
p2mpSuRadioPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpSuRadioPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the currently configured
physical layer interfaces in the subscriber unit."
::= { p2mpRadioSuObjects 1}
p2mpSuRadioPhyEntry OBJECT-TYPE
SYNTAX P2mpSuRadioPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the radio configuration information
of the propDocsWirelessMaclayer interface in the
subscriber unit.
The entry is created when a propDocsWirelessMaclayer
interface is detected in the subscriber unit. The entry
is deleted when the associated propDocsWirelessMaclayer
interface is removed."
INDEX { ifIndex }
::= { p2mpSuRadioPhyTable 1 }
P2mpSuRadioPhyEntry ::= SEQUENCE {
p2mpSuTxMuteEnable TruthValue,
p2mpSuTxMuteDuration Unsigned32
}
p2mpSuTxMuteEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When true(1), this object indicates the subscriber unit
transmission has been turned off for a duration indicated by
p2mpSuTxMuteDuration. When false(2), this object indicates
that the subscriber unit is transmitting."
::= { p2mpSuRadioPhyEntry 1 }
p2mpSuTxMuteDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object indicates the duration of time (in minutes)
for which the subscriber transmission will be turned off. "
::= { p2mpSuRadioPhyEntry 2 }
--
-- The Power Scan Table.
p2mpSuPowerScanTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpSuPowerScanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the receive power
measured at the different possible center frequencies."
::= { p2mpRadioSuObjects 2}
p2mpSuPowerScanEntry OBJECT-TYPE
SYNTAX P2mpSuPowerScanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the power related status
information of the propDocsWirelessMaclayer
interface in the subscriber unit.
The entry is created when a propDocsWirelessMaclayer
interface is detected in the subscriber unit. The entry
is deleted after the associated propDocsWirelessMaylayer
interface is removed."
INDEX { ifIndex, p2mpSuPowerScanIndex }
::= { p2mpSuPowerScanTable 1 }
P2mpSuPowerScanEntry ::= SEQUENCE {
p2mpSuPowerScanIndex Integer32,
p2mpSuCenterFrequency CwrRfFreqRange,
p2mpSuMeasuredPower Integer32
}
p2mpSuPowerScanIndex OBJECT-TYPE
SYNTAX Integer32 (1..20)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For a given ifIndex, this index value uniquely
identifies an entry in the p2mpSuPowerScanTable."
::= { p2mpSuPowerScanEntry 1 }
p2mpSuCenterFrequency OBJECT-TYPE
SYNTAX CwrRfFreqRange
UNITS "KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the frequency at which the receive power
at the subscriber unit was measured."
::= { p2mpSuPowerScanEntry 2 }
p2mpSuMeasuredPower OBJECT-TYPE
SYNTAX Integer32 (-127..50)
UNITS "dBm"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the power measured at the frequency
indicated by p2mpSuCenterFrequency."
::= { p2mpSuPowerScanEntry 3 }
--
-- HEAD END ONLY!!!!!
--
p2mpHeAlcTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpHeAlcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Automatic Line Control (ALC) configuration
information. It is supported at the head end only."
::= { p2mpRadioHeObjects 1}
p2mpHeAlcEntry OBJECT-TYPE
SYNTAX P2mpHeAlcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the ALC configuration information
the propDocsWirelessMaylayer interface at the head end.
The entry is created when a propDocsWirelessMaclayer
interface is detected in the head end unit. The entry is
deleted after the associated propDocsWirelessMaclayer
interface is removed."
INDEX { ifIndex }
::= { p2mpHeAlcTable 1 }
P2mpHeAlcEntry ::= SEQUENCE {
p2mpHeAlcEnable TruthValue,
p2mpHeAlcInterval Unsigned32,
p2mpHeAlcNumMiniSlots Unsigned32
}
p2mpHeAlcEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to enable/disable ALC at the Head End. A
value of true(1), indicates that ALC is enabled."
::= { p2mpHeAlcEntry 1 }
p2mpHeAlcInterval OBJECT-TYPE
SYNTAX Unsigned32 (32..1024)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the scheduling interval. It is the
regular interval at which the ALC grant in Map is transmitted
to the SU's"
::= { p2mpHeAlcEntry 2 }
p2mpHeAlcNumMiniSlots OBJECT-TYPE
SYNTAX Unsigned32 (1..4)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This indicates the number of minislots within each grant."
::= { p2mpHeAlcEntry 3 }
--
-- The Intermediate Frequency Resource table.
--
p2mpHeIntFreqTable OBJECT-TYPE
SYNTAX SEQUENCE OF P2mpHeIntFreqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the state of the
intermediate frequency subsystem in the radio system. This
table is supported at the head end only."
::= { p2mpRadioHeObjects 2}
p2mpHeIntFreqEntry OBJECT-TYPE
SYNTAX P2mpHeIntFreqEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The entry of this table is created when the managed system
detects a propDocsWirelessMaclayer interface in the head
end unit.
The entry is deleted when the associated
propDocsWirelessMaclayer interface is removed."
INDEX { ifIndex }
::= { p2mpHeIntFreqTable 1 }
P2mpHeIntFreqEntry ::= SEQUENCE {
p2mpHeIfTxOscState CwrOscState,
p2mpHeIfRxOscState CwrOscState,
p2mpHeIfRefOscState CwrOscState,
p2mpHeIfInpFreq Unsigned32,
p2mpHeIfOutFreq Unsigned32,
p2mpHeTrapEnable TruthValue
}
p2mpHeIfTxOscState OBJECT-TYPE
SYNTAX CwrOscState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of the IF transmit oscillator.
The oscillator must be in oscillatorOk(1) state for the system
to function properly."
::= { p2mpHeIntFreqEntry 1 }
p2mpHeIfRxOscState OBJECT-TYPE
SYNTAX CwrOscState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of the IF receive oscillator.
The oscillator must be in oscillatorOk(1) state for the system
to function properly."
::= { p2mpHeIntFreqEntry 2 }
p2mpHeIfRefOscState OBJECT-TYPE
SYNTAX CwrOscState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the state of the IF reference oscillator.
The oscillator must be in oscillatorOk(1) state for the system
to function properly."
::= { p2mpHeIntFreqEntry 3 }
p2mpHeIfInpFreq OBJECT-TYPE
SYNTAX Unsigned32(1000..500000)
UNITS "KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the IF input frequency."
::= { p2mpHeIntFreqEntry 4 }
p2mpHeIfOutFreq OBJECT-TYPE
SYNTAX Unsigned32(1000..500000)
UNITS "KHz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the IF output frequency."
::= { p2mpHeIntFreqEntry 5 }
p2mpHeTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When set to true(1), this enables the notifications
that are specific to the head end. When set to false(2),
these notifications are disabled."
DEFVAL { true }
::= { p2mpHeIntFreqEntry 6 }
-- The following two OBJECT IDENTIFIERS are used to define SNMPv2
-- Notifications that are backward compatible with SNMPv1 Traps.
p2mpPhyMIBNotificationPrefix OBJECT IDENTIFIER ::= {ciscoWirelessPhyMIB 2}
p2mpPhyMIBNotification OBJECT IDENTIFIER ::= {p2mpPhyMIBNotificationPrefix 0}
--
-- The following traps are generated by the radio system. These traps are not
-- in response to any threshold specification that might have been defined.
--
p2mpRadioPhyFailNotification NOTIFICATION-TYPE
OBJECTS {
p2mpLastPhyFailureType,
p2mpLastPhyFailureReason
}
STATUS current
DESCRIPTION
"A p2mpRadioPhyFailNotification is sent if the value of
p2mpLastPhyFailureType changes due to the new failure
being detected in the Radio interface."
::= { p2mpPhyMIBNotification 1 }
p2mpTrapRfSupplyVoltage NOTIFICATION-TYPE
OBJECTS { p2mpRfSupplyVoltageState }
STATUS current
DESCRIPTION
"The supply voltage to the RF resource has changed.
The p2mpRfSupplyVoltageState specifies whether the supply
voltage is in spec or not."
::= { p2mpPhyMIBNotification 2 }
p2mpTrapRfRxOsc NOTIFICATION-TYPE
OBJECTS { p2mpRfRxOscState }
STATUS current
DESCRIPTION
"The RF receive frequency oscillator has changed state.
The p2mpRfRxOscState specifies the current state of
the oscillator."
::= { p2mpPhyMIBNotification 3 }
p2mpTrapRfTxOsc NOTIFICATION-TYPE
OBJECTS { p2mpRfTxOscState }
STATUS current
DESCRIPTION
"The RF transmit frequency oscillator has changed state.
The p2mpRfRxOscState specifies the state of the
oscillator."
::= { p2mpPhyMIBNotification 4 }
p2mpTrapRfTemp NOTIFICATION-TYPE
OBJECTS { p2mpRfTemperature }
STATUS current
DESCRIPTION
"The temperature of the RF module identified by p2mpRfIndex
has exceeded a defined reference."
::= { p2mpPhyMIBNotification 5 }
p2mpTrapRfCommLinkError NOTIFICATION-TYPE
OBJECTS { p2mpRfType }
STATUS current
DESCRIPTION
"This trap indicates that the host and the IF module cannot
communicate with the RF resource identified by p2mpRfType."
::= { p2mpPhyMIBNotification 6 }
p2mpTrapTxPower NOTIFICATION-TYPE
OBJECTS { p2mpRfType }
STATUS current
DESCRIPTION
"This trap indicates that the transmit power for the RF resource
identified by p2mpRfType exceeded a predefined threshold."
::= { p2mpPhyMIBNotification 7 }
p2mpTrapRfStatusChange NOTIFICATION-TYPE
OBJECTS { p2mpRfStatus }
STATUS current
DESCRIPTION
"This trap indicates that the RF resource either came online(1)
or went offline(2)."
::= { p2mpPhyMIBNotification 8 }
p2mpTrapHeIfRxOsc NOTIFICATION-TYPE
OBJECTS { p2mpHeIfRxOscState }
STATUS current
DESCRIPTION
"The IF receive frequency oscillator has changed state."
::= { p2mpPhyMIBNotification 9 }
p2mpTrapHeIfTxOsc NOTIFICATION-TYPE
OBJECTS { p2mpHeIfTxOscState }
STATUS current
DESCRIPTION
"The IF transmit frequency oscillator has changed state."
::= { p2mpPhyMIBNotification 10 }
p2mpTrapHeIfExtRefOsc NOTIFICATION-TYPE
OBJECTS { p2mpHeIfRefOscState }
STATUS current
DESCRIPTION
"The IF Reference Frequency oscillator has changed state."
::= { p2mpPhyMIBNotification 11 }
-- ============================================================================
--
-- Conformance
--
p2mpRadioPhyConformance OBJECT IDENTIFIER ::= { p2mpRadioObjects 4 }
p2mpRadioPhyCompliances OBJECT IDENTIFIER ::= { p2mpRadioPhyConformance 1 }
p2mpRadioPhyGroups OBJECT IDENTIFIER ::= { p2mpRadioPhyConformance 2 }
-- Compliance
p2mpRadioPhyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement Point to
Multipoint wireless interfaces compliant with the Cisco Systems
Inc. specification."
MODULE -- ciscoWirelessPhyMIB
MANDATORY-GROUPS {
p2mpCommonRadioGroup,
p2mpCommonRfGroup,
p2mpCommonTestGroup
-- p2mpCommonNotificationGroup
}
GROUP p2mpRadioSuGroup
DESCRIPTION
"This group is mandatory for a system that supports the
radio subscriber unit feature. It is not implemented at
the Head End."
GROUP p2mpRadioHeGroup
DESCRIPTION
"This group is mandatory for a system that supports the
radio head end feature. It is not implemented at the
Subscriber Unit."
-- GROUP p2mpHeOnlyNotificationGroup
-- DESCRIPTION
-- "This group is mandatory for a system that supports the
-- radio head end feature. It is not implemented at the
-- Subscriber Unit."
GROUP p2mpRadioAntennaGroup
DESCRIPTION
"This group is optional for a system that supports the
radio antenna management feature on Head end or
subscriber unit."
::= { p2mpRadioPhyCompliances 1 }
-- Units of Conformance
p2mpCommonRadioGroup OBJECT-GROUP
OBJECTS {
p2mpSelfTest,
p2mpDiversityAntennaPresent,
p2mpCableLoss,
p2mpCableLossDiversity,
p2mpDenyService,
p2mpClockRefExt,
p2mpCommonTrapEnable,
p2mpLastPhyFailureType,
p2mpLastPhyFailureReason,
p2mpLedType,
p2mpLedState
}
STATUS current
DESCRIPTION
"Mandatory group of objects implemented to configure a
point to multipoint wireless radio."
::= { p2mpRadioPhyGroups 1 }
p2mpCommonRfGroup OBJECT-GROUP
OBJECTS {
p2mpRfType,
p2mpRfOpMode,
p2mpTxFreqRangeMin,
p2mpTxFreqRangeMax,
p2mpRxFreqRangeMin,
p2mpRxFreqRangeMax,
p2mpMinTxPower,
p2mpMaxTxPower,
p2mpRfTxOscState,
p2mpRfRxOscState,
p2mpRfTemperature,
p2mpRfSupplyVoltageState,
p2mpRfStatus,
p2mpRfLoopbackSupported,
p2mpDuplexerRF,
p2mpDuplexerLoPassbandMinFreq ,
p2mpDuplexerLoPassbandMaxFreq,
p2mpDuplexerHiPassbandMinFreq,
p2mpDuplexerHiPassbandMaxFreq,
p2mpDuplexerReceivePassband,
p2mpDuplexerTxInsertionLoss,
p2mpDuplexerBurnDate
}
STATUS current
DESCRIPTION
"Mandatory group of objects implemented to tune the phy quality
in a point to multipoint wireless radio."
::= { p2mpRadioPhyGroups 2 }
p2mpCommonTestGroup OBJECT-GROUP
OBJECTS {
p2mpLocalLoopbackMode,
p2mpLocalLoopbackAntenna,
p2mpLocalLoopbackChannel
}
STATUS current
DESCRIPTION
"Mandatory group of objects implemented in the point to
multi point wireless system for Testing the link."
::= { p2mpRadioPhyGroups 3 }
--p2mpCommonNotificationGroup NOTIFICATION-GROUP
-- NOTIFICATIONS {
-- p2mpRadioPhyFailNotification,
-- p2mpTrapRfSupplyVoltage,
-- p2mpTrapRfRxOsc,
-- p2mpTrapRfTxOsc,
-- p2mpTrapRfTemp,
-- p2mpTrapRfCommLinkError,
-- p2mpTrapTxPower,
-- p2mpTrapRfStatusChange
-- }
-- STATUS current
-- DESCRIPTION
-- "Collection of notifications supported on the head end and the
-- subscriber unit to indicate configuration and RF failures."
-- ::= { p2mpRadioPhyGroups 4 }
--
p2mpRadioSuGroup OBJECT-GROUP
OBJECTS {
p2mpSuTxMuteEnable,
p2mpSuTxMuteDuration,
p2mpSuCenterFrequency,
p2mpSuMeasuredPower
}
STATUS current
DESCRIPTION
"Group of objects implemented at the Subscriber unit."
::= { p2mpRadioPhyGroups 5 }
p2mpRadioHeGroup OBJECT-GROUP
OBJECTS {
p2mpHeAlcEnable,
p2mpHeAlcInterval,
p2mpHeAlcNumMiniSlots,
p2mpHeIfTxOscState,
p2mpHeIfRxOscState,
p2mpHeIfRefOscState,
p2mpHeIfInpFreq,
p2mpHeIfOutFreq,
p2mpHeTrapEnable
}
STATUS current
DESCRIPTION
"Group of objects implemented at the Head End."
::= { p2mpRadioPhyGroups 6 }
--p2mpHeOnlyNotificationGroup NOTIFICATION-GROUP
-- NOTIFICATIONS {
-- p2mpTrapHeIfRxOsc,
-- p2mpTrapHeIfTxOsc,
-- p2mpTrapHeIfExtRefOsc
-- }
-- STATUS current
-- DESCRIPTION
-- "Collection of notifications supported on the head end only.
-- These notification are used to indicate failures pertaining to
-- the IF module."
-- ::= { p2mpRadioPhyGroups 7 }
--
p2mpRadioAntennaGroup OBJECT-GROUP
OBJECTS {
p2mpRfResource,
p2mpAntennaXDim,
p2mpAntennaYDim,
p2mpAntennaType,
p2mpAntennaDescr,
p2mpAntennaGain,
p2mpAntennaPolarization
}
STATUS current
DESCRIPTION
"Group of objects implemented in the point to multi point wireless
system for managing the antennas available in the system."
::= { p2mpRadioPhyGroups 8 }
END
Reference in New Issue View Git Blame Copy Permalink