MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WIRELESS-EXP-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

959 lines
33 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-WIRELESS-EXP-MIB.my: Cisco Wireless Radio Point to Point
-- Experimental MIB.
-- May 1999, Joseph L Raja
-- Copyright (c) 1998-2005 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-WIRELESS-EXP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32
FROM SNMPv2-SMI
DateAndTime,
DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex
FROM IF-MIB
entPhysicalIndex
FROM ENTITY-MIB
ciscoExperiment
FROM CISCO-SMI;
ciscoWirelessExpMIB MODULE-IDENTITY
LAST-UPDATED "200512271003Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: firestar-sw@cisco.com"
DESCRIPTION
"This is the MIB Module for the Cisco Wireless Radio
Point to Point experimental components.
Glossary
The following terms are used in the MIB definitions below.
Radio Card: The line card that provides the wireless
communication features.
Radio Link: The bi-directional wireless link that exists
between two communicating radio cards.
Radio PHY: Represents the transmission characteristics of the
Radio Link.
RF Unit: The Radio Frequency components and the associated antennas.
Radio System: Radio card and RF unit(s).
Cisco Wireless Radio Experimental MIB Organization
The Cisco Wireless Radio Experimental MIB provides the following
management groups :
When the draft-ietf-entmib-v2-03.txt gets finalized the Radio Frequency
Group will be moved into that MIB.
When the CISCO-IMAGE-MIB.my gets updated to include the image
capabilities, the Image Group will be migrated into that MIB.
When the CISCO-LED-MIB.my becomes available and supports the
functionality the LED group needs, the LED group will be
migrated into that.
o. Radio Frequency Resource Group
This contains information about the Radio frequency
transmission and reception resources available on the
system. This group determines the portions of the
radio spectrum at which the radio subsystem can
operate.
This group in conjunction with the radio PHY group
determine the acutal spectrum that gets used for
communications.
o. Image Group
This provides facilities to manage radio line card's
firmware image file URL's in router's image repository.
It also provides access to the image details.
o. LED Group
This group provides information about LEDs available
on the line card.
o. Duplexor Group
This group provides information about the Duplexors
installed in the RF resources."
REVISION "200512271003Z"
DESCRIPTION
"Imported Unsigned32 from SNMPv2-SMI."
REVISION "9905132010Z"
DESCRIPTION
"The initial version of this MIB module."
::= { ciscoExperiment 52 }
-- The Cisco Wireless Radio MIB Tree
cwrRadioExpMibObjects OBJECT IDENTIFIER
::= { ciscoWirelessExpMIB 1 }
cwrRadioFreqEntityGroup OBJECT IDENTIFIER
::= { cwrRadioExpMibObjects 1 }
cwrRadioImageGroup OBJECT IDENTIFIER
::= { cwrRadioExpMibObjects 2 }
cwrRadioLedGroup OBJECT IDENTIFIER
::= { cwrRadioExpMibObjects 3 }
cwrRadioDuplexorGroup OBJECT IDENTIFIER
::= { cwrRadioExpMibObjects 4 }
-- The Radio Frequency Entity Group.
-- The RF Table. This table contains information about the Radio frequency
-- Entities available for use on the system.
cwrRfEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwrRfEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the radio
frequency resources available for use on the system."
::= { cwrRadioFreqEntityGroup 1 }
cwrRfEntityEntry OBJECT-TYPE
SYNTAX CwrRfEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents one entry in the cwrRfEntityTable. This table is
largely a read only table which provides details on the radio
frequency resources available on the system. Physically
each RF resource may be realized by one antenna and its
associated control hardware.
But a single antenna and its associated hardware may act
as more than 1 RF resource.
A Duplexor is a mechanical device, that acts as a band pass filter
when installed in an RF resource.
Normally a RF resource is capable of operating over a wide
frequency range. To operate at restricted frequencies,
the user has to own that part of the frequency spectrum.
Since the user may not own parts of
the frequency spectrum over which the RF resource may operate, a
Duplexor is installed in the RF resource. This restricts the
RF resource to operate in the passband defined by the Duplexor.
In this table the Duplexor's are identified by an index into the
cwrDuplexorTable.
It is indexed by the ifIndex and cwrRfEntityIndex."
INDEX {
ifIndex,
cwrRfEntityIndex
}
::= { cwrRfEntityTable 1 }
CwrRfEntityEntry ::= SEQUENCE {
cwrRfEntityIndex Integer32,
cwrRfSwRevision Unsigned32,
cwrRfAssemblyPartNumberClass Unsigned32,
cwrRfAssemblyPartNumberBase Unsigned32,
cwrRfAssemblyPartNumberVersion Unsigned32,
cwrRfBoardPartNumberClass Unsigned32,
cwrRfBoardPartNumberBase Unsigned32,
cwrRfBoardPartNumberVersion Unsigned32,
cwrRfBoardRevision DisplayString,
cwrRfSerialNumber DisplayString,
cwrRfManfDate DateAndTime,
cwrRfVendorId Integer32,
cwrRfDuplexorIndex Integer32
}
cwrRfEntityIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the index of this entry in the
cwrRfEntityTable."
::= { cwrRfEntityEntry 1 }
cwrRfSwRevision OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the software revision number
of controlling the RF subsystem."
::= { cwrRfEntityEntry 2 }
cwrRfAssemblyPartNumberClass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the assembly part number class of the RF
subsystem."
::= { cwrRfEntityEntry 3 }
cwrRfAssemblyPartNumberBase OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the assembly part number base of the RF
subsystem."
::= { cwrRfEntityEntry 4 }
cwrRfAssemblyPartNumberVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the assembly part number version of the RF
subsystem."
::= { cwrRfEntityEntry 5 }
cwrRfBoardPartNumberClass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board part number class of the RF
subsystem."
::= { cwrRfEntityEntry 6 }
cwrRfBoardPartNumberBase OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board part number base of the RF
subsystem."
::= { cwrRfEntityEntry 7 }
cwrRfBoardPartNumberVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board part number version of the RF
subsystem."
::= { cwrRfEntityEntry 8 }
cwrRfBoardRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board revision of the RF subsystem."
::= { cwrRfEntityEntry 9 }
cwrRfSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the serial number of the RF subsystem."
::= { cwrRfEntityEntry 10 }
cwrRfManfDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the manufacturing date of the RF subsystem."
::= { cwrRfEntityEntry 11 }
cwrRfVendorId OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Radio frequency device vendor ID."
::= { cwrRfEntityEntry 12 }
cwrRfDuplexorIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the index into cwrDuplexorTable.
This index identifies the Duplexor associated with this
RF resource."
::= { cwrRfEntityEntry 13 }
-- The Intermediate Frequency Entity table. This table contains
-- information about the Intermediate Frequency subsystem on the radio
-- card.
cwrIntFreqEntityTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwrIntFreqEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the intermediate frequency
subsystem on the radio card."
::= { cwrRadioFreqEntityGroup 2 }
cwrIntFreqEntityEntry OBJECT-TYPE
SYNTAX CwrIntFreqEntityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents one entry in the cwrIntFreqEntityTable.
This table is largely a read only table which provides
details on the intermediate frequency subsystem available
on the radio card.
It is indexed by the ifIndex."
INDEX { ifIndex }
::= { cwrIntFreqEntityTable 1 }
CwrIntFreqEntityEntry ::= SEQUENCE {
cwrIfAssemblyPartNumberClass Unsigned32,
cwrIfAssemblyPartNumberBase Unsigned32,
cwrIfAssemblyPartNumberVersion Unsigned32,
cwrIfBoardPartNumberClass Unsigned32,
cwrIfBoardPartNumberBase Unsigned32,
cwrIfBoardPartNumberVersion Unsigned32,
cwrIfBoardRevision DisplayString,
cwrIfSerialNumber DisplayString,
cwrIfManfDate DateAndTime,
cwrIfVendorId Integer32,
cwrIfSwRevision Unsigned32
}
cwrIfAssemblyPartNumberClass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the assembly part number class of the IF
subsystem."
::= { cwrIntFreqEntityEntry 1 }
cwrIfAssemblyPartNumberBase OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the assembly part number base of the IF
subsystem."
::= { cwrIntFreqEntityEntry 2 }
cwrIfAssemblyPartNumberVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the assembly part number version of the IF
subsystem."
::= { cwrIntFreqEntityEntry 3 }
cwrIfBoardPartNumberClass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board part number class of the IF
subsystem."
::= { cwrIntFreqEntityEntry 4 }
cwrIfBoardPartNumberBase OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board part number base of the IF
subsystem."
::= { cwrIntFreqEntityEntry 5 }
cwrIfBoardPartNumberVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board part number version of the IF
subsystem."
::= { cwrIntFreqEntityEntry 6 }
cwrIfBoardRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the board revision of the IF subsystem."
::= { cwrIntFreqEntityEntry 7 }
cwrIfSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the serial number of the IF subsystem."
::= { cwrIntFreqEntityEntry 8 }
cwrIfManfDate OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the manufacturing date of the IF subsystem."
::= { cwrIntFreqEntityEntry 9 }
cwrIfVendorId OBJECT-TYPE
SYNTAX Integer32 (1..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents the IF vendor ID."
::= { cwrIntFreqEntityEntry 10 }
cwrIfSwRevision OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This object represents the IF software revision."
::= { cwrIntFreqEntityEntry 11 }
-- The Image Group.
-- The Firmware Image Table. This table provides facilities to manage
-- the firmware images that the router will use for configuring the
-- radio line cards.
cwrImageTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwrImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides facilities to manage the firmware
images that the router will use to configure the radio
line cards.
When images need to be downloaded, the software will
search this list starting from the first, for an image whose
capabilities match the configuration specified in the
cwrRadioBaseTable and the cwrRadioPhyTable and download that image
to the appropriate hardware component.
Insertion into the table at arbitrary points is not supported.
Any new image URL added to this table will be inserted at index
1 only.
Also note that an image gets downloaded to the hardware only when
when a radio link is administratively enabled."
::= { cwrRadioImageGroup 1 }
cwrImageEntry OBJECT-TYPE
SYNTAX CwrImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This represents one entry in the cwrImageTable."
INDEX { cwrImageIndex }
::= { cwrImageTable 1 }
CwrImageEntry ::= SEQUENCE {
cwrImageIndex Integer32,
cwrImageNameUrl DisplayString,
cwrImageState INTEGER,
cwrImageSize Unsigned32,
cwrImageChipClass Unsigned32,
cwrImageChipType Unsigned32,
cwrImageCapability1 Unsigned32,
cwrImageCapability2 Unsigned32,
cwrImageVersion Unsigned32,
cwrImageTag DisplayString,
cwrImageOp INTEGER
}
cwrImageIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents the one entry in this table. It also represents
the search order. When images need to be downloaded to the
hardware, the images are searched in the order of this index
for an image that matches the hardware capabilities and uses it."
::= { cwrImageEntry 1 }
cwrImageNameUrl OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is the name of the image in the
Universal Resource Locator (URL) format.
This URL will be used to access the image when needed."
::= { cwrImageEntry 2 }
cwrImageState OBJECT-TYPE
SYNTAX INTEGER {
imageInvalid(1),
imageValid(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This represents the state of the image.
image_invalid(1): If the image could not be accessed for any reason.
image_valid(2) : Image accessible and available for use."
::= { cwrImageEntry 3 }
cwrImageSize OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This represents the size of the image in bytes."
::= { cwrImageEntry 4 }
cwrImageChipClass OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This represents the class of chips onto which this image may be
loaded."
::= { cwrImageEntry 5 }
cwrImageChipType OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This represents the download method to use."
::= { cwrImageEntry 6 }
cwrImageCapability1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This represents a bitmask.
The bit mask identifies the capabilities of
this image. See also cwrImageCapability2."
::= { cwrImageEntry 7 }
cwrImageCapability2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This represents a bitmask.
The bit mask identifies the capabilities of
this image in addition to cwrImageCapability1."
::= { cwrImageEntry 8 }
cwrImageVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "This represents the version number of this image."
::= { cwrImageEntry 9 }
cwrImageTag OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is the tag string associated with the image.
Normally used to trace the source code used to generate
this image."
::= { cwrImageEntry 10 }
cwrImageOp OBJECT-TYPE
SYNTAX INTEGER {
nop(0),
add(1),
delete(2),
move(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the operation to be performed on the
identified image.
nop(0) - This value will be returned when this object is
read.
add(1) - Will add the image URL, as the first entry in the image
table.
delete(2) - Will delete the specified ULR from the image table.
move(3) - Will make the image specified by the URL the first entry
in the imageTable."
::= { cwrImageEntry 11 }
-- The LED Group.
cwrLedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwrLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entity (Light emitting diode) LED information. For each LED on the
entity, an entry will exist in this table, describing the location
and current status of that LED."
::= { cwrRadioLedGroup 1 }
cwrLedEntry OBJECT-TYPE
SYNTAX CwrLedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing the LED information
about the entity. The entPhysicalIndex identifies
the entity on which the Led's are present."
INDEX {
entPhysicalIndex,
cwrLedIndex
}
::= { cwrLedTable 1 }
CwrLedEntry ::= SEQUENCE {
cwrLedIndex INTEGER,
cwrLedName DisplayString,
cwrLedVerticalPosition Integer32,
cwrLedHorizontalPosition Integer32,
cwrLedMode INTEGER,
cwrLedCurrentColor INTEGER
}
cwrLedIndex OBJECT-TYPE
SYNTAX INTEGER (1..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"For a given entPhysicalIndex, this index value uniquely identifies
an entry in the cwrLedTable."
::= { cwrLedEntry 1 }
cwrLedName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The label of the LED on the physical entity or a textual
description to identify the usage of the LED."
::= { cwrLedEntry 2 }
cwrLedVerticalPosition OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The position of the LED in the entity. It is counted from
top to bottom."
::= { cwrLedEntry 3 }
cwrLedHorizontalPosition OBJECT-TYPE
SYNTAX Integer32 (1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The position of the LED in the entity. It is counted from
from left to right."
::= { cwrLedEntry 4 }
cwrLedMode OBJECT-TYPE
SYNTAX INTEGER {
automatic(1),
latched(2),
forceOff(3),
forceSolidGreen(4),
forceSolidYellow(5),
forceBlinkGreen(6),
forceBlinkYellow(7),
forceBlinkBoth(8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This objects specifies the desired mode of LED updates.
automatic(1) and latched(2) are settings used by the software
to determine how the LED should be updated.
The others are for diagnostic purposes. The LED will be turned on
or off as specified by the other (3-8) settings.
The modes mean the following:
automatic(1): The system updates the LED according to the
default settings for that entity.
latched(2): Once the LED is turned on, user has to turn it off.
This applies only to alarm LEDs.
forceOff(3): Force the LED off.
forceSolidGreen(4): Force the LED to be solid green in on state.
forceSolidYellow(5):Force the LED to be solid Yellow in on state
forceBlinkGreen(6): Force the LED to blink in Green.
forceBlinkYellow(7):Force the LED to blink in Yellow.
forceBlinkBoth(8): Force the LED to blink Yellow and
Green alternatively."
::= { cwrLedEntry 5 }
cwrLedCurrentColor OBJECT-TYPE
SYNTAX INTEGER {
green(1),
yellow(2),
blinkGreen(3),
blinkYellow(4),
blinkGreenYellow(5),
off(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Indicates the current color of the LED."
::= { cwrLedEntry 6 }
-- The Duplexor Group.
-- The Duplexor Table. This table contains information about the
-- Duplexor Entities available for use on the system.
-- A Duplexor is a mechanical device, that acts as a bandpass filter
-- when installed in an RF resource.
cwrDuplexorTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwrDuplexorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about the Duplexors
available for use on the system."
::= { cwrRadioDuplexorGroup 1 }
cwrDuplexorEntry OBJECT-TYPE
SYNTAX CwrDuplexorEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This represents one entry in the cwrDuplexorTable. This table
provides details on the Duplexors available on the system.
It is indexed by the ifIndex and cwrDuplexorIndex."
INDEX {
ifIndex,
cwrDuplexorIndex
}
::= { cwrDuplexorTable 1 }
CwrDuplexorEntry ::= SEQUENCE {
cwrDuplexorIndex Integer32,
cwrDuplexorCiscoPartNumber DisplayString,
cwrDuplexorLoPassbandRange DisplayString,
cwrDuplexorHiPassbandRange DisplayString,
cwrDuplexorReceivePassband INTEGER,
cwrDuplexorCLEICode DisplayString,
cwrDuplexorVendorName DisplayString,
cwrDuplexorSerialNumber DisplayString
}
cwrDuplexorIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the index of this entry in the
cwrDuplexorTable."
::= { cwrDuplexorEntry 1 }
cwrDuplexorCiscoPartNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the Cisco part number for this Duplexor."
::= { cwrDuplexorEntry 2 }
cwrDuplexorLoPassbandRange OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the low frequency range that
this Duplexor will pass through without any attenuation.
All low frequencies outside this
range will be attenuated to a level such that an RF resource that
uses this Duplexor will be unable to transmit or receive those
frequencies."
::= { cwrDuplexorEntry 3 }
cwrDuplexorHiPassbandRange OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the high frequency range
that this Duplexor will pass through without any
attenuation. All high frequencies outside this
range will be attenuated to a level such that an RF resource that
uses this Duplexor will be unable to transmit or receive those
frequencies."
::= { cwrDuplexorEntry 4 }
cwrDuplexorReceivePassband OBJECT-TYPE
SYNTAX INTEGER {
loPassband(1),
hiPassband(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates which of the two passbands are being used
to receive transmissions. The RF Resource can receive on either of
the duplexor passbands.
loPassband(1) - The RF Resource is receiving on a frequency within
the range identified by cwrDuplexorLoPassbandRange.
hiPassband(2) - The RF Resource is receiving on a frequency within
the range identified by cwrDuplexorHiPassbandRange."
::= { cwrDuplexorEntry 5 }
cwrDuplexorCLEICode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The CLEI code for this Duplexor."
::= { cwrDuplexorEntry 6 }
cwrDuplexorVendorName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Vendor Name for this Duplexor."
::= { cwrDuplexorEntry 7 }
cwrDuplexorSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The Serial number of this Duplexor."
::= { cwrDuplexorEntry 8 }
-- ============================================================================
-- Compliance Statements
cwrRadioExpConformance OBJECT IDENTIFIER
::= { ciscoWirelessExpMIB 2 }
cwrRadioExpCompliances OBJECT IDENTIFIER
::= { cwrRadioExpConformance 1 }
cwrRadioExpGroups OBJECT IDENTIFIER
::= { cwrRadioExpConformance 2 }
cwrRadioExpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for Point to Point wireless interface
devices compliant to Cisco Systems Inc. specification."
MODULE -- this module
MANDATORY-GROUPS {
cwrComplianceRadioRFGroup,
cwrComplianceRadioImageGroup,
cwrComplianceRadioLEDGroup,
cwrComplianceRadioDuplexorGroup
}
::= { cwrRadioExpCompliances 1 }
-- Required Radio frequency resource Group.
cwrComplianceRadioRFGroup OBJECT-GROUP
OBJECTS {
cwrRfSwRevision,
cwrRfAssemblyPartNumberClass,
cwrRfAssemblyPartNumberBase,
cwrRfAssemblyPartNumberVersion,
cwrRfBoardPartNumberClass,
cwrRfBoardPartNumberBase,
cwrRfBoardPartNumberVersion,
cwrRfBoardRevision,
cwrRfSerialNumber,
cwrRfManfDate,
cwrRfVendorId,
cwrRfDuplexorIndex,
cwrIfAssemblyPartNumberClass,
cwrIfAssemblyPartNumberBase,
cwrIfAssemblyPartNumberVersion,
cwrIfBoardPartNumberClass,
cwrIfBoardPartNumberBase,
cwrIfBoardPartNumberVersion,
cwrIfBoardRevision,
cwrIfSerialNumber,
cwrIfManfDate,
cwrIfVendorId,
cwrIfSwRevision
}
STATUS current
DESCRIPTION
"Group of objects implemented in the point to point wireless
system for managing the Radio Frequency resources on the link."
::= { cwrRadioExpGroups 1 }
-- Required Image Group.
cwrComplianceRadioImageGroup OBJECT-GROUP
OBJECTS {
cwrImageNameUrl,
cwrImageState,
cwrImageSize,
cwrImageChipType,
cwrImageChipClass,
cwrImageCapability1,
cwrImageCapability2,
cwrImageVersion,
cwrImageTag,
cwrImageOp
}
STATUS current
DESCRIPTION
"Group of objects implemented in the point to point wireless
system for managing images related to the point-to-point wireless
firmware."
::= { cwrRadioExpGroups 2 }
-- Required LED group.
cwrComplianceRadioLEDGroup OBJECT-GROUP
OBJECTS {
cwrLedName,
cwrLedVerticalPosition,
cwrLedHorizontalPosition,
cwrLedMode,
cwrLedCurrentColor
}
STATUS current
DESCRIPTION
"Group of objects implemented in the point to point wireless
card to provide information about the LEDs on the card."
::= { cwrRadioExpGroups 3 }
-- Required Duplexor group.
cwrComplianceRadioDuplexorGroup OBJECT-GROUP
OBJECTS {
cwrDuplexorCiscoPartNumber,
cwrDuplexorLoPassbandRange,
cwrDuplexorHiPassbandRange,
cwrDuplexorReceivePassband,
cwrDuplexorCLEICode,
cwrDuplexorVendorName,
cwrDuplexorSerialNumber
}
STATUS current
DESCRIPTION
"Group of objects implemented in the point to point wireless
card to provide information about the duplexor's in the system."
::= { cwrRadioExpGroups 4 }
END
Reference in New Issue View Git Blame Copy Permalink