MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-SRCP-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

860 lines
29 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-WAN-SRCP-MIB.my
--
-- January 2004, George Ogagan
--
-- Copyright (c) 1999, 2000, 2001, 2002, 2003, 2004 by
-- Cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-WAN-SRCP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32,
IpAddress
FROM SNMPv2-SMI
DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ciscoWan FROM CISCOWAN-SMI
mgcRedundancyGrpNum FROM CISCO-WAN-MGC-REDUN-MIB;
ciscoWanSrcpMIB MODULE-IDENTITY
LAST-UPDATED "200401300000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module for managing SRCP(Simple Resource
Coordination Protocol) implementations. SRCP
is a resource coordination protocol used
between a MGC(Media Gateway Controller) and
a MG(Media Gateway). SRCP MIB is applicable
to both controllers (SRCP clients) and gateways
(SRCP servers).
MGMIB: This is the short name used for
CISCO-WAN-MG-MIB in this MIB."
REVISION "200401300000Z"
DESCRIPTION
"Update descriptions in the MIB.
"
REVISION "200012260000Z"
DESCRIPTION
"Changed description of srcpRequestMaxTimeout which
had a reference to an object srcpRequestMinTimeout
which should actually be srcpRequestTimeout.
"
REVISION "200008310000Z"
DESCRIPTION
"moved srcpRequestMinTimeout, srcpRequestRetries
and srcpRequestMaxTimeout objects to new subgroup
srcpAdminRetyObject
"
REVISION "200007210000Z"
DESCRIPTION
"Added following new objects for exponential retry
srcpRequestTimeOut , srcpRequestRetries,
srcpRequestMaxTimeout
"
REVISION "200005280000Z"
DESCRIPTION
"Moved some objects from the srcpPeerTable to the
srcpPeerGrpTable for the implementation of the
MGC Redundancy Feature.
"
REVISION "200005240000Z"
DESCRIPTION
"added srcpRequestMinTimeout, srcpRequestRetries and
srcpRequestMaxTimeout objects
"
REVISION "199911230000Z"
DESCRIPTION
"Added DEFVAL clause for srcpPeerHeartbeatInterval,
srcpPeerMaxPduSize.
"
REVISION "199911010000Z"
DESCRIPTION
"Changed the description of srcpPeerHeartbeatInterval
to say that value less than 100 (except 0) is not
allowed.
"
REVISION "199910210000Z"
DESCRIPTION
"Changed the description of TimeSinceHeartbeat as it
was saying return -1 if in locked state or unassociated
state. But -1 is not a valid value as per the specified
range. Changed it to return 0.
"
REVISION "199906230000Z"
DESCRIPTION
"Added definition for srcpStatsPeerName & changed
srcpPeerName to read-only.
"
REVISION "199906070000Z"
DESCRIPTION
"Added DEFVAL clause for srcpPortNumber and
srcpPeerPortNumber
"
REVISION "199904290000Z"
DESCRIPTION
"Initial version of the MIB.
"
::= { ciscoWan 11 }
srcpObjects OBJECT IDENTIFIER ::= { ciscoWanSrcpMIB 1 }
srcpAdminObjects OBJECT IDENTIFIER ::= { srcpObjects 1 }
srcpStatsObjects OBJECT IDENTIFIER ::= { srcpObjects 2 }
srcpAdminRetyObjects OBJECT IDENTIFIER ::= { srcpObjects 3 }
-- *********************************************************************
-- The SRCP administration Group
-- *********************************************************************
srcpVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of the SRCP protocol version for
exmaple SRCP 1.0.2. If MGMIB is supported,
this name corresponds to mgProtocolName
(defined in CISCO-WAN-MG-MIB MIB) in an
entry to mgSupportedProtocolTable.
"
::= { srcpAdminObjects 1 }
srcpPortNumber OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the UDP port used
for SRCP on the system (local UDP port). It is
configurable only if the system is in a locked or
disabled state (i.e If MGMIB Is supported,
mgAdministrativeState(defined in CISCO-WAN-MG-MIB MIB)
should be 'locked' before the UDP port can be configured).
"
DEFVAL { 2428 }
::= { srcpAdminObjects 2 }
-- **************************************************************************
-- SRCP Peer Table
-- **************************************************************************
srcpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrcpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a table which is used to provision peer-specific
SRCP configuration and administration information.
Each table entry corresponds to an SRCP peer as
identified by its domain name(srcpPeerName).
"
::= { srcpAdminObjects 3 }
srcpPeerEntry OBJECT-TYPE
SYNTAX SrcpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents an individual table entry in srcpPeerTable.
Each row corresponds to an SRCP peer and is identified
by its domain name (srcpPeerName).
Entries in this table are implicitly created by the agent.
If the agent supports MGMIB, this occurs as follows:
An entry shall be created when an entry is created in the
mgcRedundancyGrpProtocolTable(defined in
CISCO-WAN-MGC-REDUN-MIB MIB) and when
mgProtocolNumber (defined in CISCO-WAN-MG-MIB MIB)
refers to SRCP as supported protocol. An entry will
be made for all MGC(Media Gateway Controller) in
that MGC Redundancy Group. Accordingly, an entry
shall be deleted if the corresponding entry in
the mgcRedundancyGrpProtocolTable is deleted.
If the agent does not support MGMIB, entry creation
might occur when the first SRCP communication with
an IP address/domain name occurs.
if MGC Redundacy feature is supported the following objects:
srcpPeerHeartbeatInterval, srcpPeerTimeSinceHeartbeat
rcpPeerMaxPduSize are not meaningful here. These objects
are defined per MGC Redundancy Group rather than per MGC.
"
INDEX { srcpPeerId }
::= { srcpPeerTable 1 }
SrcpPeerEntry ::= SEQUENCE {
srcpPeerId Integer32,
srcpPeerName DisplayString,
srcpPeerPortNumber Integer32,
srcpPeerHeartbeatInterval Integer32,
srcpPeerTimeSinceHeartbeat Integer32,
srcpPeerMaxPduSize Integer32
}
srcpPeerId OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object identifies the SRCP peer and serves
as index to this table. If MGMIB is supported,
this is the same as the mgcNumber(defined
in CISCO-WAN-MG-MIB MIB) from the mgcTable.
"
::= { srcpPeerEntry 1 }
srcpPeerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the name of the SRCP peer.
If MGMIB is supported, this is the same as the
mgcName from the mgcTable.
"
::= { srcpPeerEntry 2 }
srcpPeerPortNumber OBJECT-TYPE
SYNTAX Integer32 (1025..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the UDP port of
the SRCP peer.
"
DEFVAL { 2428 }
::= { srcpPeerEntry 3 }
srcpPeerHeartbeatInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to configure the length of the
heartbeat interval, in milliseconds. The heartbeat
interval indicate when the GW(Gateway) is expected to
receive a heartbeat from a specific peer or MGC group.
If value is 0, heartbeat for this peer is not
monitored. The heartbeat interval less than 100 is
not allowed (except 0).
If MGC Redundancy is supported, this object is not
effective. Instead, the user should use
srcpPeerGrpHeartbeatInterval.
"
DEFVAL { 0 }
::= { srcpPeerEntry 4 }
srcpPeerTimeSinceHeartbeat OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The time since the last heartbeat was received, in
milliseconds. This represents the difference between
the current time and the last time an SRCP command was
received.
A value of 0 shall be returned if the heartbeat is not
monitored. Even if the heartbeat is monitored, a value
of 0 shall be returned if any of the following is true:
i) The system is locked or disabled (as indicated by
mgAdministrativeState).
ii) The srcpPeer is unassociated as indicated by
mgcAssociationState(defined in CISCO-WAN-MG-MIB MIB).
If MGC Redundancy is supported, this object is not
effective. Instead, the user should use
srcpPeerGrpTimeSinceHeartbeat.
"
::= { srcpPeerEntry 5 }
srcpPeerMaxPduSize OBJECT-TYPE
SYNTAX Integer32 (4095..65535)
UNITS "octets"
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object is used to configure the maximum UDP
PDU(Protocol Data Unit) size, in octets, that may
be used for SRCP communications with the peer.
This value may not be configurable for all agents.
If MGC Redundancy is supported, this object is not
effective. Instead, the user should use
srcpPeerGrpMaxPduSize.
"
DEFVAL { 16384 }
::= { srcpPeerEntry 6 }
-- **************************************************************************
-- SRCP Peer Group Table
-- **************************************************************************
srcpPeerGrpParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrcpPeerGrpParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to provision SRCP parameters for
an MGC Redundancy group. MGCs can be configured as part
of MGC Redundancy groups. This feature allows for
redundant call agents.
Each table entry corresponds to an SRCP peer entry that is
identified by the MGC Redundancy group number.
"
::= { srcpAdminObjects 4 }
srcpPeerGrpParamEntry OBJECT-TYPE
SYNTAX SrcpPeerGrpParamEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Represents an individual table entry in the
srcpPeerGrpParamTable. Each row corresponds to
an MGC Redundancy Group and is identified by the
MGC Redundancy Group Number.
Entries are implicitly created when the SRCP protocol
is added for an MGC Redundancy Group. The entry will
be removed if the SRCP protocol is removed for an MGC
Redundancy Group.
"
INDEX { mgcRedundancyGrpNum }
::= {srcpPeerGrpParamTable 1 }
SrcpPeerGrpParamEntry ::= SEQUENCE {
srcpPeerGrpHeartbeatInterval Integer32,
srcpPeerGrpTimeSinceHeartbeat Integer32,
srcpPeerGrpMaxPduSize Integer32
}
srcpPeerGrpHeartbeatInterval OBJECT-TYPE
SYNTAX Integer32 (0..65535)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the length of the
heartbeat interval, in milliseconds. If 0, heartbeat
for this peer Group is not monitored. The heartbeat
interval less than 100 is not allowed (except 0).
"
DEFVAL { 0 }
::= { srcpPeerGrpParamEntry 1 }
srcpPeerGrpTimeSinceHeartbeat OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since the last heartbeat was received,
in milliseconds. This represents the difference
between the current time and the last time an SRCP
command was received.
A value of 0 shall be returned if the heartbeat is not
monitored. Even if the heartbeat is monitored, a value
of 0 shall be returned if any of the following is true:
i) The system is locked or disabled (as indicated by
mgAdministrativeState).
ii) The stateChangeNtfy flag is disabled for the srcpPeer
Group (as indicated by mgcRedundancyGrpStateChangeNtfy
of CISCO-WAN-MGC-REDUN-MIB).
"
DEFVAL { 0 }
::= { srcpPeerGrpParamEntry 2 }
srcpPeerGrpMaxPduSize OBJECT-TYPE
SYNTAX Integer32 (4095..65535)
UNITS "octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to configure the maximum UDP PDU size,
in octets, that may be used for SRCP communications with
the peer. This value may not be configurable for all agents.
"
DEFVAL { 16384 }
::= { srcpPeerGrpParamEntry 3 }
-- *********************************************************************
-- The SRCP administration Retry Group
-- *********************************************************************
srcpRequestTimeOut OBJECT-TYPE
SYNTAX Integer32 (1..10000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the minimum timeout value.
This value along with srcpRequestMaxTimeout and
srcpRequestRetries is used to determine the exponential
retry interval for retransmitting unacknowledged SRCP
messages.
It is the responsibility of the requesting entity to
provide suitable timeouts for all outstanding commands,
and to retry commands when timeouts exceeded.
The default value of this object is 500 milliseconds.
When the value of this object changes srcpAdminObjects
group changed trap will be sent as specify by
vismConfigChangeTypeBitMap in CISCO-VISM-MODULE-MIB.
"
::= { srcpAdminRetyObjects 1 }
srcpRequestRetries OBJECT-TYPE
SYNTAX Integer32 (0..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the number of retries for a SRCP
request that exceeds timeout. It is the responsibility
of the requesting entity to provide suitable timeouts for
all outstanding commands, and to retry when times out.
The default value of this object is 3.
When the value of this object changes srcpAdminObjects
group changed trap will be sent as specify by
vismConfigChangeTypeBitMap in CISCO-VISM-MODULE-MIB.
"
::= { srcpAdminRetyObjects 2 }
srcpRequestMaxTimeout OBJECT-TYPE
SYNTAX Integer32 (1..10000)
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the maximum timeout value.
This timer value is used along with srcpRequestTimeOut and
srcpRequestRetries to determine the exponential retry
interval for retransmitting unacknowledged SRCP messages.
The value of this timer has to be greater than or equal to
srcpRequestTimeOut.
The default value of this object is 500 milliseconds.
When the value of this object changes srcpAdminObjects
group changed trap will be sent as specify by
vismConfigChangeTypeBitMap in CISCO-VISM-MODULE-MIB.
"
::= { srcpAdminRetyObjects 3 }
-- *****************************************************************
-- The SRCP Statistics table
-- *****************************************************************
srcpPeerStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF SrcpPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains SRCP statistics information since
reset. SRCP statistics are kept in this table, with
each table entry containing the statistics of SRCP
messages that communicated with a peer at a specific
IP address of the peer.
It differs from the SRCP peer table which maintains
information on a per call agent basis as identified
by their domain names.
"
::= { srcpStatsObjects 1 }
srcpPeerStatsEntry OBJECT-TYPE
SYNTAX SrcpPeerStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The row of the srcpPeerStatsTable contains information about
SRCP message statistics per IP address of the MGC.
An entry is implicitly created and deleted by the agent.
There can be two cases:
1. Case of Internal address resolution : In this case IP
addresses of all SRCP peers are resolved internally.
If the agent supports the MGMIB, the following
referential integrity rules apply:
When an entry is added to mgcResolutionTable defined in
CISCO-WAN-MG-MIB with a specific IP address, an entry
is created in this srcpPeerStatsTable for that IP address.
When an entry is deleted from mgcResolutionTable,
the row with the corresponding IP address in this table
will be deleted.
2. Case of External address resolution : If there is at
least one Call agent whose IP address is resolved
externally, an entry is created whenever SRCP
communication occurs with a new IP address. Table
entries are never deleted, but must be
nonpersistent in agent implementations, i.e. must be
purged in case of a system shutdown/restart.
"
INDEX { srcpStatsPeerIpAddress }
::= { srcpPeerStatsTable 1 }
SrcpPeerStatsEntry ::= SEQUENCE {
srcpStatsPeerIpAddress IpAddress,
srcpStatsPeerName DisplayString,
packetsDiscardedCnts Counter32,
augwCnts Counter32,
augwFailCnts Counter32,
aulnCnts Counter32,
aulnFailCnts Counter32,
ntfyCnts Counter32,
ntfyFailCnts Counter32,
rqntCnts Counter32,
rqntFailCnts Counter32
}
srcpStatsPeerIpAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the IP address of the
SRCP peer and serves as index to the table.
"
::= { srcpPeerStatsEntry 1 }
srcpStatsPeerName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the name of the SRCP peer. This is the
same as the mgcName from the mgcTable. It is provided
here as a read-only parameter as a convinience feature.
"
::= { srcpPeerStatsEntry 2 }
packetsDiscardedCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that were received and discarded.
The packets may get discarded because of indecipherable
PDUs like bad protocol version, bad command verb etc, or
because of unknown transaction IDs (in case of SRCP clients).
"
::= { srcpPeerStatsEntry 3 }
augwCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AUGW(Audit Gateway) commands received
from the peer on this IP address."
::= { srcpPeerStatsEntry 4 }
aulnCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of AULN(Audit Line) commands received from
or sent to the peer on this IP address.
"
::= { srcpPeerStatsEntry 5 }
rqntCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RQNT(Notification Request) commands
received from or sent to the peer on this IP address.
"
::= { srcpPeerStatsEntry 6 }
ntfyCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of NTFY(Notify) commands received from
or sent to the peer on this IP address.
"
::= { srcpPeerStatsEntry 7 }
augwFailCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For MG : The total number of AUGW commands
received that were responded to with a failure
return code.
For MGC : The total number of AUGW commands sent which
were timed out without a response or for which a response
with failure return code was received.
"
::= { srcpPeerStatsEntry 8 }
aulnFailCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media gateway : The total number of AULN commands
received that were responded to with a failure
return code.
Media gateway controller : The total number of AULN
commands sent which were timed out without a response or
For which a response with failure return code
was received.
"
::= { srcpPeerStatsEntry 9 }
rqntFailCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media gateway : The total number of RQNT commands
received that were responded to with a failure return
code.
Media gateway controller : The total number of RQNT
commands sent which were timed out without a response
or for which a response with failure return code was
received.
"
::= { srcpPeerStatsEntry 10 }
ntfyFailCnts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Media gateway : The total number of NTFY commands sent
which were timed out without a response or for which a
response with failure return code was received.
Media gateway controller: The total number of NTFY commands
received that were responded to with a failure return code.
"
::= { srcpPeerStatsEntry 11 }
--**********************************************************************
-- Conformance
--**********************************************************************
--
-- conformance information
--
srcpMIBConformance OBJECT IDENTIFIER ::= { ciscoWanSrcpMIB 3 }
srcpMIBCompliances OBJECT IDENTIFIER ::= { srcpMIBConformance 1 }
srcpMIBGroups OBJECT IDENTIFIER ::= { srcpMIBConformance 2 }
--
-- deprecated compliance statement
--
srcpMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for the SNMPv2 entities
which implement SRCP MIB."
MODULE -- this module
MANDATORY-GROUPS { srcpConfigurationGroup,
srcpStatisticsGroup
}
::= { srcpMIBCompliances 1 }
srcpMIBComplaince2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
" The compliance statement for the SNMPv2 entities
which implement SRCP MIB."
MODULE -- this module
MANDATORY-GROUPS { srcpConfigurationGroup2,
srcpStatisticsGroup2
}
::= { srcpMIBCompliances 2 }
-- current complaince statements
srcpMIBComplaince3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMPv2 entities
which implement SRCP MIB."
MODULE -- this module
MANDATORY-GROUPS { srcpConfigurationGroup3,
srcpStatisticsGroup2
}
::= { srcpMIBCompliances 3 }
--
-- units of conformance
--
-- deprecated Groups
--
srcpConfigurationGroup OBJECT-GROUP
OBJECTS {
srcpVersion,
srcpPortNumber,
srcpPeerName,
srcpPeerPortNumber,
srcpPeerHeartbeatInterval,
srcpPeerTimeSinceHeartbeat,
srcpPeerMaxPduSize
}
STATUS deprecated
DESCRIPTION
"This group contains objects related to configuration
of SRCP. Min Access of read only is permissible for
system providing only a fixed SRCP port."
::= { srcpMIBGroups 1 }
srcpStatisticsGroup OBJECT-GROUP
OBJECTS {
srcpStatsPeerName,
packetsDiscardedCnts,
augwCnts,
aulnCnts,
rqntCnts,
ntfyCnts,
augwFailCnts,
aulnFailCnts,
rqntFailCnts,
ntfyFailCnts
}
STATUS deprecated
DESCRIPTION
"This group contains the statistics per SRCP peer."
::= { srcpMIBGroups 2 }
srcpConfigurationGroup2 OBJECT-GROUP
OBJECTS {
srcpVersion,
srcpPortNumber,
srcpPeerName,
srcpPeerPortNumber,
srcpPeerHeartbeatInterval,
srcpPeerTimeSinceHeartbeat,
srcpPeerMaxPduSize,
srcpRequestTimeOut,
srcpRequestRetries,
srcpRequestMaxTimeout
}
STATUS deprecated
DESCRIPTION
"This group contains objects related to configuration
of SRCP. Min Access of read only is permissible for
system providing only a fixed SRCP port."
::= { srcpMIBGroups 3 }
srcpConfigurationGroup3 OBJECT-GROUP
OBJECTS {
srcpVersion,
srcpPortNumber,
srcpPeerName,
srcpPeerPortNumber,
srcpPeerGrpHeartbeatInterval,
srcpPeerGrpTimeSinceHeartbeat,
srcpPeerGrpMaxPduSize,
srcpRequestTimeOut,
srcpRequestRetries,
srcpRequestMaxTimeout
}
STATUS current
DESCRIPTION
"This group contains objects related to configuration
of SRCP. Min Access of read only is permissible for
system providing only a fixed SRCP port."
::= { srcpMIBGroups 5 }
srcpStatisticsGroup2 OBJECT-GROUP
OBJECTS {
srcpStatsPeerName,
packetsDiscardedCnts,
augwCnts,
aulnCnts,
rqntCnts,
ntfyCnts,
augwFailCnts,
aulnFailCnts,
rqntFailCnts,
ntfyFailCnts
}
STATUS current
DESCRIPTION
"This group contains the statistics per SRCP peer."
::= { srcpMIBGroups 4 }
END
Reference in New Issue View Git Blame Copy Permalink