snmp_mib_archive/CISCO-WAN-RPM-CONN-EXT-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

319 lines
10 KiB
Plaintext

-- *****************************************************************
--
-- CISCO-WAN-RPM-CONN-EXT-MIB.my:
-- CISCO RPM(Router Processor Module)Connection Extension MIB
--
-- June 1999, Siu-Man Leung
-- May 2002, Subra Hegde
--
-- Copyright (c) 1999,2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-WAN-RPM-CONN-EXT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32 FROM SNMPv2-SMI
TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ciscoWan FROM CISCOWAN-SMI
cwAtmChanCnfgEntry FROM CISCO-WAN-ATM-CONN-MIB;
ciscoWanRpmConnExtMIB MODULE-IDENTITY
LAST-UPDATED "200205210000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"This MIB together with the CISCO-WAN-ATM-CONN-MIB support
provisioning of PVC endpoints and SPVCs on the MGX's Route
Processor Module (RPM)."
REVISION "200205210000Z"
DESCRIPTION "Importing Unsigned32 from SNMPv2-SMI."
REVISION "200203180000Z"
DESCRIPTION
"Modified the range of cwrChanVirtualTemplate
to be consistent with value supported in CLI.
The Range has been modified from 0..25 to 0..200."
REVISION "199909300000Z"
DESCRIPTION
"Initial Version of this MIB Module."
::= { ciscoWan 9 }
cwRpmConnExtMIBObjects OBJECT IDENTIFIER ::= { ciscoWanRpmConnExtMIB 1 }
cwRpmConnExt OBJECT IDENTIFIER ::= { cwRpmConnExtMIBObjects 1 }
cwRpmChanExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwRpmChanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table together with the 'cwAtmChanCnfgTable' support
provisioning of PVC endpoints and SPVCs on an RPM. This
table contains objects that are specific to RPM.
This table is an augmentation to the 'cwAtmChanCnfgTable'."
::= { cwRpmConnExt 1 }
cwRpmChanExtEntry OBJECT-TYPE
SYNTAX CwRpmChanExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains RPM specific parameters for a
connection endpoint on an RPM."
AUGMENTS { cwAtmChanCnfgEntry }
::= { cwRpmChanExtTable 1 }
CwRpmChanExtEntry ::= SEQUENCE {
cwrChanSubInterface Unsigned32,
cwrChanVcd Unsigned32,
cwrChanAalEncapType INTEGER,
cwrChanVirtualTemplate Unsigned32,
cwrChanInArpInterval Unsigned32,
cwrChanOamLoopbkTxInterval Unsigned32,
cwrChanOamManage TruthValue,
cwrChanOamRetryUpCount Unsigned32,
cwrChanOamRetryDownCount Unsigned32,
cwrChanOamRetryInterval Unsigned32
}
cwrChanSubInterface OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RPM's backplane sub-interface for which this channel
is configured. Sub-interface 0 means the switch port."
DEFVAL { 0 }
::= { cwRpmChanExtEntry 1 }
cwrChanVcd OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Circuit Descriptor. A unique number which identifies
a connection."
::= { cwRpmChanExtEntry 2 }
cwrChanAalEncapType OBJECT-TYPE
SYNTAX INTEGER {
aal5ciscoPPP(1),
aal5muxAPOLLO(2),
aal5muxAPPLETALK(3),
aal5muxDECNET(4),
aal5muxIP(5),
aal5muxIPX(6),
aal5muxPPP(7),
aal5muxVINES(8),
aal5muxXNS(9),
aal5nlpid(10),
aal5snap(11),
ilmi(12),
qsaal(13)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"ATM adaptation layer (AAL) and Encapsulation type.
aal5ciscoPPP - For Cisco PPP over ATM.
'cwrChanVirtualTemplate' is required to be
set for this type.
aal5muxAPOLLO - For a multiplex (MUX) - type virtual
circuit using the Apollo protocol.
aal5muxAPPLETALK - For a MUX-type virtual circuit using the
AppleTalk protocol.
aal5muxDECNET - For a MUX-type virtual circuit using the
DECnet protocol.
aal5muxIP - For a MUX-type virtual circuit using the
IP protocol.
aal5muxIPX - For a MUX-type virtual circuit using the
IPX protocol.
aal5muxPPP - For a MUX-type virtual circuit using the
PPP protocol.
'cwrChanVirtualTemplate' is required to be
set for this type.
aal5muxVINES - For a MUX-type virtual circuit using the
VINES protocol.
aal5muxXNS - For a MUX-type virtual circuit using the
XNS protocol.
aal5nlpid - Allows ATM interfaces to interoperate with
HSSI.
aal5snap - The only encapsulation supported for
Inverse ARP. Logical Link Control/
Subnetwork Access Protocol (LLC/SNAP)
precedes the protocol datagram.
ilmi - Used to set up communication with ILMI.
qsaal - A signalling type PVC used for setting up
or tearing down SVCs."
DEFVAL { aal5snap }
::= { cwRpmChanExtEntry 3 }
cwrChanVirtualTemplate OBJECT-TYPE
SYNTAX Unsigned32 (0..200)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object identifies the virtual template.
The non-zero value need to be specified for
Cisco PPP or MUX-type PPP encapsulation
(i.e. cwrChanAalEncapType = aal5ciscoPPP or
aal5muxPPP).
The value 0 signifies that Virtual Template
is not applicable. "
DEFVAL { 0 }
::= { cwRpmChanExtEntry 4 }
cwrChanInArpInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..60)
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies how often Inverse ARP datagrams will be sent
on this channel. 0 will disable the InArp for this channel.
This object is only supported for aal5snap encapsulation
(i.e. cwrChanAalEncapType = aal5snap)."
DEFVAL { 15 }
::= { cwRpmChanExtEntry 5 }
cwrChanOamLoopbkTxInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..600)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This specifies how often to generate an OAM F5 loopback cell
from this channel. 0 will disable generation of OAM F5
loopback cells."
DEFVAL { 10 }
::= { cwRpmChanExtEntry 6 }
cwrChanOamManage OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This enables/disables OAM management for this channel.
If set to true(1), OAM management is enabled."
DEFVAL { false }
::= { cwRpmChanExtEntry 7 }
cwrChanOamRetryUpCount OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of consecutive end-to-end F5 OAM loopback cell
responses that must be received in order to change a PVC
connection state to up.
This object only applies if OAM management is enabled
(i.e. cwrChanOAMManage = true)."
DEFVAL { 3 }
::= { cwRpmChanExtEntry 8 }
cwrChanOamRetryDownCount OBJECT-TYPE
SYNTAX Unsigned32 (1..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Number of consecutive end-to-end F5 OAM loopback cell
responses that are not received in order to change a PVC
connection state to down.
This object only applies if OAM management is enabled
(i.e. cwrChanOAMManage = true)."
DEFVAL { 5 }
::= { cwRpmChanExtEntry 9 }
cwrChanOamRetryInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The frequency that end-to-end F5 OAM loopback cells are
transmitted when a change in UP/DOWN state of a PVC is
being verified.
This object only applies if OAM management is enabled
(i.e. cwrChanOAMManage = true)."
DEFVAL { 1 }
::= { cwRpmChanExtEntry 10 }
-- conformance information
ciscoWanRpmConnExtMIBConformance
OBJECT IDENTIFIER ::= { ciscoWanRpmConnExtMIB 2 }
ciscoWanRpmConnExtMIBCompliances
OBJECT IDENTIFIER ::= { ciscoWanRpmConnExtMIBConformance 1 }
ciscoWanRpmConnExtMIBGroups
OBJECT IDENTIFIER ::= { ciscoWanRpmConnExtMIBConformance 2 }
-- compliance statements
ciscoWanRpmConnExtMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the Cisco MGX RPM connection
management group."
MODULE -- this module
MANDATORY-GROUPS {
ciscoWanRpmConnExtMIBGroup
}
::= { ciscoWanRpmConnExtMIBCompliances 1 }
-- units of conformance
ciscoWanRpmConnExtMIBGroup OBJECT-GROUP
OBJECTS {
cwrChanSubInterface,
cwrChanVcd,
cwrChanAalEncapType,
cwrChanVirtualTemplate,
cwrChanInArpInterval,
cwrChanOamLoopbkTxInterval,
cwrChanOamManage,
cwrChanOamRetryUpCount,
cwrChanOamRetryDownCount,
cwrChanOamRetryInterval
}
STATUS current
DESCRIPTION
"Objects related to ATM connection in RPM module."
::= { ciscoWanRpmConnExtMIBGroups 1 }
END