mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-18 00:13:02 +00:00
993 lines
27 KiB
Plaintext
993 lines
27 KiB
Plaintext
-- *****************************************************************
|
|
-- ciscoWanFrX21LineMIB
|
|
--
|
|
-- September 2002, Subra Hegde
|
|
--
|
|
-- Copyright (c) 2002 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- ****************************************************************
|
|
|
|
CISCO-WAN-FR-X21-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Integer32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
x21,
|
|
frPortCnfX21PortGrp
|
|
FROM BASIS-MIB
|
|
ciscoWan FROM CISCOWAN-SMI;
|
|
|
|
ciscoWanFrX21MIB MODULE-IDENTITY
|
|
LAST-UPDATED "200209190000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-wanatm@cisco.com"
|
|
DESCRIPTION
|
|
"The MIB module to configure X.21/HSSI physical
|
|
and logical interfaces.
|
|
This MIB module also contains alarm configuration
|
|
of X.21 interfaces.
|
|
|
|
Terminologies Used:
|
|
|
|
HSSI : High Speed Serial Interface. The HSSI defines
|
|
both electrical and physical interfaces on
|
|
DTE and DCE devices. It operates at the physical
|
|
layer of the OSI reference model. This provides
|
|
high-speed data communication over WAN and LAN links."
|
|
|
|
REVISION "200209190000Z"
|
|
DESCRIPTION
|
|
"Initial version of the MIB.
|
|
|
|
The content of this MIB was originally available
|
|
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
|
|
The applicable objects from CISCO-WAN-AXIPOP-MIB
|
|
are defined using SMIv2 in this MIB."
|
|
|
|
::= { ciscoWan 49 }
|
|
|
|
|
|
x21CnfGrp OBJECT IDENTIFIER ::= { x21 1 }
|
|
x21AlmCnfGrp OBJECT IDENTIFIER ::= { x21 2 }
|
|
x21AlmGrp OBJECT IDENTIFIER ::= { x21 3 }
|
|
|
|
-- **********************************************************************
|
|
-- X.21 Config Group
|
|
--
|
|
-- This group contains X.21 line configuration table
|
|
-- **********************************************************************
|
|
|
|
x21CnfGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF X21CnfGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The X21 Configuration table. The table size is
|
|
given by the value of x21LineNumofValidEntries."
|
|
::= { x21CnfGrp 1 }
|
|
|
|
x21CnfGrpEntry OBJECT-TYPE
|
|
SYNTAX X21CnfGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the X21 Configuration table."
|
|
INDEX { x21LineNum }
|
|
|
|
::= { x21CnfGrpTable 1 }
|
|
|
|
X21CnfGrpEntry ::=
|
|
SEQUENCE {
|
|
x21LineNum Integer32,
|
|
x21LineEnable INTEGER,
|
|
x21LineType INTEGER,
|
|
x21LineRate INTEGER,
|
|
x21LineLoopbackCommand INTEGER,
|
|
x21LineSendCode INTEGER,
|
|
x21LineLoopbackCodeDetection INTEGER,
|
|
x21ConnectorType INTEGER,
|
|
x21InvertClock INTEGER,
|
|
x21LineInterfaceType INTEGER,
|
|
x21ClkFrequencyThreshold Integer32,
|
|
serialLineRate Integer32,
|
|
serialLineRateVariation Integer32
|
|
}
|
|
|
|
x21LineNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the identifier of a X.21 interface.
|
|
FRSM-HS2/HS2B-HSSI supports a range from 1 to 2.
|
|
FRSM-HS2B-12IN1 supports a range from 1 to 8."
|
|
::= { x21CnfGrpEntry 1 }
|
|
|
|
x21LineEnable OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2),
|
|
modify (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable disables, enables or modifies a line
|
|
1 - disable
|
|
2 - enable
|
|
3 - modify
|
|
Default is enable.
|
|
"
|
|
::= { x21CnfGrpEntry 2 }
|
|
|
|
x21LineType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
dte (1),
|
|
dce (2),
|
|
dteST (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates the type X21 line type.
|
|
The line-type affects the clock -- the DCE device
|
|
always provides the clock and DTE accepts it.
|
|
dteST is only applicable to V.35 interfaces
|
|
Default is DTE.
|
|
"
|
|
::= { x21CnfGrpEntry 3 }
|
|
|
|
|
|
x21LineRate OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
r48Kbps(1),
|
|
r56Kbps(2),
|
|
r64Kbps(3),
|
|
r112Kbps(4),
|
|
r128Kbps(5),
|
|
r168Kbps(6),
|
|
r192Kbps(7),
|
|
r224Kbps(8),
|
|
r256Kbps(9),
|
|
r280Kbps(10),
|
|
r320Kbps(11),
|
|
r336Kbps(12),
|
|
r384Kbps(13),
|
|
r392Kbps(14),
|
|
r448Kbps(15),
|
|
r512Kbps(16),
|
|
r768Kbps(17),
|
|
r1024Kbps(18),
|
|
r1536Kbps(19),
|
|
r1544Kbps(20),
|
|
r1792Kbps(21),
|
|
r1920Kbps(22),
|
|
r1984Kbps(23),
|
|
r2048Kbps(24),
|
|
r3097Kbps(25),
|
|
r3157Kbps(26),
|
|
r4096Kbps(27),
|
|
r4645Kbps(28),
|
|
r4736Kbps(29),
|
|
r6195Kbps(30),
|
|
r6315Kbps(31),
|
|
r7744Kbps(32),
|
|
r7899Kbps(33),
|
|
r8192Kbps(34),
|
|
r9289Kbps(35),
|
|
r9472Kbps(36),
|
|
r10240Kbps(37),
|
|
r10890Kbps(38),
|
|
r11060Kbps(39),
|
|
r12390Kbps(40),
|
|
r12630Kbps(41),
|
|
r13900Kbps(42),
|
|
r14220Kbps(43),
|
|
r14340Kbps(44),
|
|
r15490Kbps(45),
|
|
r15800Kbps(46),
|
|
r16380Kbps(47),
|
|
r20030Kbps(48),
|
|
r24990Kbps(49),
|
|
r52Mbps(50),
|
|
-- FRSM_VHS added for frsm_vhs
|
|
r17370Kbps(51),
|
|
r18950Kbps(52),
|
|
r20530Kbps(53),
|
|
r22100Kbps(54),
|
|
r23680Kbps(55),
|
|
--
|
|
-- n*T1 rates. Added for FRSM_VHS
|
|
-- note that 1.544Kbps is already enumerated above
|
|
--
|
|
r3088Kbps(56),
|
|
r4632Kbps(57),
|
|
r6176Kbps(58),
|
|
r7720Kbps(59),
|
|
r9264Kbps(60),
|
|
r10808Kbps(61),
|
|
r12352Kbps(62),
|
|
r13896Kbps(63),
|
|
r15440Kbps(64),
|
|
r16984Kbps(65),
|
|
r18528Kbps(66),
|
|
r20072Kbps(67),
|
|
r21616Kbps(68),
|
|
r23160Kbps(69),
|
|
r24704Kbps(70),
|
|
r26248Kbps(71),
|
|
r27792Kbps(72),
|
|
r29336Kbps(73),
|
|
r30880Kbps(74),
|
|
r32424Kbps(75),
|
|
r33968Kbps(76),
|
|
r35512Kbps(77),
|
|
r37056Kbps(78),
|
|
r38600Kbps(79),
|
|
r40144Kbps(80),
|
|
r41688Kbps(81),
|
|
r43232Kbps(82),
|
|
r44776Kbps(83),
|
|
r46320Kbps(84),
|
|
r47864Kbps(85),
|
|
r49408Kbps(86),
|
|
r50952Kbps(87),
|
|
--
|
|
-- n*E1 rates. Added for FRSM_VHS.
|
|
--
|
|
r6144Kbps(88),
|
|
r12288Kbps(89),
|
|
r14336Kbps(90),
|
|
r16384Kbps(91),
|
|
r18432Kbps(92),
|
|
r20480Kbps(93),
|
|
r22528Kbps(94),
|
|
r24576Kbps(95),
|
|
r26624Kbps(96),
|
|
r28672Kbps(97),
|
|
r30720Kbps(98),
|
|
r32768Kbps(99),
|
|
r34816Kbps(100),
|
|
r36864Kbps(101),
|
|
r38912Kbps(102),
|
|
r40960Kbps(103),
|
|
r43008Kbps(104),
|
|
r45056Kbps(105),
|
|
r47104Kbps(106),
|
|
r49152Kbps(107),
|
|
r51200Kbps(108)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable configures the X.21/HSSI/V.35 line-rate.
|
|
Note that enumerations 51 through 108 are supported
|
|
only by FRSM-HS2/HS2B card.
|
|
|
|
default is r48Kbps on FRSM-HS2B-12IN1
|
|
default is r52Mbps on FRSM-HS2/HS2B-HSSI
|
|
"
|
|
::= { x21CnfGrpEntry 4 }
|
|
|
|
x21LineLoopbackCommand OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
x21NoLoop (1),
|
|
x21DiagnosticMetallicLoop (2),
|
|
x21DiagnosticFrontcardLoop (3),
|
|
x21RemoteLoop (4),
|
|
v35MetallicLoop (5)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable represents the loopback state
|
|
x21NoLoop
|
|
Not in the loopback state. Normal traffic can be sent
|
|
x21DiagnosticMetallicLoop
|
|
Loopbacks the line on the back-card towards the Network.
|
|
x21DiagnosticFrontcardLoop
|
|
Loopbacks the line on the frontcard toward the Network.
|
|
x21RemoteLoop
|
|
The remote NTU is in the loop back mode.
|
|
In this state, the FRSM-HS1 is sending the loopback
|
|
code to remote NTU.
|
|
Default is x21NoLoop.
|
|
Note: Before going into one of the loopbacks the state
|
|
should be x21NoLoop.
|
|
"
|
|
::= { x21CnfGrpEntry 5 }
|
|
|
|
x21LineSendCode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
x21NoCode (1),
|
|
x21SendLoopACode (2),
|
|
x21SendLoopBCode (3),
|
|
x21SendLocalLoopCode (4),
|
|
x21SendRemoteLoopCode (5),
|
|
x21SendUnLoopCode (6)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable indicates what type of code is
|
|
being sent across the X.21/HSSI interface by the
|
|
device. The values mean:
|
|
|
|
x21NoCode: No loopback.
|
|
|
|
x21SendLoopACode:
|
|
Start sending Loop A code. Valid only if
|
|
the backcard is HSSI and the line-type is DTE.
|
|
This command loops the line module of the remote
|
|
device.
|
|
|
|
x21SendLoopBCode:
|
|
Start sending Loop B code. Valid only if the
|
|
backcard is HSSI and the line-type is DTE.
|
|
This command loops the digital section of the
|
|
remote device.
|
|
|
|
x21SendLocalLoopCode:
|
|
Start sending CCITT X.21 Loopback Type 3 code.
|
|
This is valid only if the backcard is X.21 type.
|
|
|
|
x21SendRemoteLoopCode:
|
|
Start sending CCITT X.21 Loopback Type 2 code.
|
|
This is valid only if the backcard is X.21 type.
|
|
|
|
x21SendUnLoopCode:
|
|
Sending a loopback termination request.
|
|
Valid for both HSSI and X.21 lines.
|
|
|
|
To execute any of the loop-codes the x21LineLoopbackCommand
|
|
should be set to x21RemoteLoop.
|
|
Once the x21SendUnLoopCode succeeds the x21LineLoopbackCommand
|
|
would transition back to x21NoLoop state.
|
|
|
|
Default is x21NoCode."
|
|
::= { x21CnfGrpEntry 6 }
|
|
|
|
x21LineLoopbackCodeDetection OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
codeDetectDisabled (1),
|
|
codeDetectEnabled (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable detection of line Loopback Codes.
|
|
The loopback detection is implemented only in HSSI
|
|
DCE mode.
|
|
Default is codeDetectDisabled."
|
|
::= { x21CnfGrpEntry 7 }
|
|
|
|
x21ConnectorType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
x21Backcard (1),
|
|
hssiBackcard (2),
|
|
v35Backcard (3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"back card type
|
|
This object is not used by FRSM-HS2/HS2B
|
|
"
|
|
::= { x21CnfGrpEntry 8 }
|
|
|
|
x21InvertClock OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonInvertedAndNotLooped (1),
|
|
invertedAndNotLooped (2),
|
|
nonInvertedAndLooped (3),
|
|
invertedAndLooped (4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures two options:
|
|
a) To invert the clock sent by HS1/HS2B with the
|
|
TX data or not.
|
|
b) If DCE,to expect the receive clock looped back
|
|
from DTE or not.
|
|
|
|
If DTE,to loop back the receive clock from DCE or not.
|
|
|
|
nonInvertedAndNotLooped(1)- a)=dont invert,
|
|
b)=dont expect rcv clock/
|
|
dont loop rcv clock
|
|
invertedAndNotLooped(2) - a)=invert,
|
|
b)=dont expect rcv clock/
|
|
dont loop rcv clock
|
|
nonInvertedAndLooped(3) - a)=dont invert,
|
|
b)=expect rcv clock/
|
|
loop rcv clock
|
|
invertedAndLooped(4) - a)=invert,
|
|
b)=expect rcv clock/
|
|
loop rcv clock
|
|
|
|
Enums 1 and 2 are applicable for X.21/HSSI/V.35 interfaces.
|
|
Enums 3 and 4 are applicable only for V.35.
|
|
|
|
Default for X.21/HSSI is nonInvertedAndNotLooped(1)
|
|
Default for V.35 is nonInvertedAndLooped(3)
|
|
This object is not used by FRSM-HS2/FRSM-HS2B-HSSI
|
|
This object is used by FRSM-HS2B-12IN1 and default
|
|
values are nonInvertedAndNotLooped(1) for X.21,
|
|
nonInvertedAndLooped(3) for V.35."
|
|
::= { x21CnfGrpEntry 9 }
|
|
|
|
x21LineInterfaceType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hssi(1),
|
|
x21 (2),
|
|
v35 (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates serial interface type.
|
|
Default is hssi(1).
|
|
|
|
This object is not is configurable in FRSM-HS2
|
|
and FRSM-HS2B-HSSI. It will be set to hssi(1) by
|
|
default for these cards
|
|
|
|
This object is configurable in FRSM-H2B-12IN1.
|
|
Default is v35(3)."
|
|
::= { x21CnfGrpEntry 10}
|
|
|
|
x21ClkFrequencyThreshold OBJECT-TYPE
|
|
SYNTAX Integer32 (1..5)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates user configurable percentage of
|
|
clock frequency, which is used by DTE clock monitoring
|
|
to declare clock rate out of bound alarm. This object
|
|
is valid only for X.21/v.35/HSSI DTE interfaces.
|
|
This object is supported by FRSM-HS2 and FRSM-HS2/B"
|
|
DEFVAL { 3 }
|
|
::= { x21CnfGrpEntry 11}
|
|
|
|
serialLineRate OBJECT-TYPE
|
|
SYNTAX Integer32 (48000..51840000)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Line rate for X.21/HSSI/V.35 interfaces
|
|
in bps. This object is supported only by
|
|
FRSM-HS2/B card, only multiples of
|
|
1000 are accepted.
|
|
|
|
Default is 48Kbps for X.21/V.35 interfaces
|
|
and 51840Kbps for HSSI interface."
|
|
::= { x21CnfGrpEntry 12}
|
|
|
|
serialLineRateVariation OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates line rate variation of
|
|
HSSI/X.21/V.35 DCE interfaces in ppm (parts
|
|
per million). i.e. clock generated from DCE hardware
|
|
interface = (serialLineRate +/- (serialLineRateVariation
|
|
* 10^6)/ serialLineRate)
|
|
|
|
This object is supported only by FRSM-HS2/B card "
|
|
::= { x21CnfGrpEntry 13}
|
|
|
|
|
|
x21LineNumofValidEntries OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of X.21/HSSI configuration entries
|
|
(regardless of their current configuration) in
|
|
the x21ConfigTable table."
|
|
::= { x21CnfGrp 2 }
|
|
|
|
-- ******************************************************************
|
|
--
|
|
--
|
|
-- LOGICAL PORT CONFIG Group
|
|
--
|
|
--
|
|
-- ******************************************************************
|
|
|
|
frPortCnfX21PortGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FrPortCnfX21PortGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The config table is for X.21/HSSI logical port interface
|
|
"
|
|
::= { frPortCnfX21PortGrp 1 }
|
|
|
|
|
|
frPortCnfX21PortGrpEntry OBJECT-TYPE
|
|
SYNTAX FrPortCnfX21PortGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
" An entry for logical port."
|
|
INDEX { x21portNum }
|
|
::= { frPortCnfX21PortGrpTable 1 }
|
|
|
|
FrPortCnfX21PortGrpEntry ::=
|
|
SEQUENCE {
|
|
x21portNum Integer32,
|
|
x21portLineNum Integer32,
|
|
x21portRowStatus INTEGER,
|
|
x21portFlagsBetweenFrames Integer32,
|
|
x21portEqueueServiceRatio Integer32,
|
|
x21portSpeed Integer32,
|
|
x21portAdmin INTEGER,
|
|
x21portType INTEGER,
|
|
x21portSvcStatus INTEGER,
|
|
x21portSvcInUse INTEGER,
|
|
x21portSvcShareLcn INTEGER,
|
|
x21portSvcLcnLow Integer32,
|
|
x21portSvcLcnHigh Integer32,
|
|
x21portSvcDlciLow Integer32,
|
|
x21portSvcDlciHigh Integer32,
|
|
x21portDeleteSvcs INTEGER,
|
|
x21portIngrSvcBandW Integer32,
|
|
x21portEgrSvcBandW Integer32
|
|
}
|
|
|
|
x21portNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is logical port number.
|
|
The HSSI backcard can support upto 3 ports.
|
|
The X.21 back card can support 4 logical ports."
|
|
::= { frPortCnfX21PortGrpEntry 1}
|
|
|
|
x21portLineNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..4)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents the line number.
|
|
On FRSM-HS1 the HSSI can support 3 lines
|
|
and X.21 4 lines."
|
|
::= { frPortCnfX21PortGrpEntry 2}
|
|
|
|
x21portRowStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
add(1),
|
|
del(2),
|
|
mod(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable adds, deletes, or modifies the port
|
|
1- add
|
|
2 - delete
|
|
3 - modify
|
|
Default is add."
|
|
::= { frPortCnfX21PortGrpEntry 3 }
|
|
|
|
x21portFlagsBetweenFrames OBJECT-TYPE
|
|
SYNTAX Integer32 (1..10)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of flags transmitted between two consecutive
|
|
HDLC frames.
|
|
Default is 1 flag."
|
|
::= { frPortCnfX21PortGrpEntry 4 }
|
|
|
|
x21portEqueueServiceRatio OBJECT-TYPE
|
|
SYNTAX Integer32 (1..15)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Number of times queue 1 is serviced
|
|
for every time queue 2 is serviced.
|
|
Default is 1."
|
|
::= { frPortCnfX21PortGrpEntry 5 }
|
|
|
|
x21portSpeed OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port speed in kbps. At present it is same
|
|
as line speed."
|
|
::= { frPortCnfX21PortGrpEntry 6 }
|
|
|
|
x21portAdmin OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
up(1),
|
|
down(2),
|
|
write-Only(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used for administratively
|
|
changing the status of the port.
|
|
Up/down used to up and down the port.
|
|
Default is the up state."
|
|
::= { frPortCnfX21PortGrpEntry 7 }
|
|
|
|
x21portType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
frame-relay (1),
|
|
frFUNI (2),
|
|
frame-forward (3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents port type. The processing of the
|
|
frames depends on the type of the port."
|
|
::= { frPortCnfX21PortGrpEntry 8 }
|
|
|
|
x21portSvcStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable (1),
|
|
enable (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents SVC status."
|
|
::= { frPortCnfX21PortGrpEntry 9 }
|
|
|
|
x21portSvcInUse OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
not-use (1),
|
|
in-use (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents port SVC in use."
|
|
::= { frPortCnfX21PortGrpEntry 10 }
|
|
|
|
x21portSvcShareLcn OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
port-based(1),
|
|
card-based(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents port type."
|
|
::= { frPortCnfX21PortGrpEntry 11 }
|
|
|
|
x21portSvcLcnLow OBJECT-TYPE
|
|
SYNTAX Integer32 (16..271)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents low end of reserved LCN for SVC."
|
|
::= { frPortCnfX21PortGrpEntry 12 }
|
|
|
|
x21portSvcLcnHigh OBJECT-TYPE
|
|
SYNTAX Integer32 (16..271)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents high end of reserved LCN for SVC."
|
|
::= { frPortCnfX21PortGrpEntry 13 }
|
|
|
|
x21portSvcDlciLow OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1023)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents low end of reserved DLCI for SVC."
|
|
::= { frPortCnfX21PortGrpEntry 14 }
|
|
|
|
x21portSvcDlciHigh OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1023)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents high end of reserved DLCI for SVC."
|
|
::= { frPortCnfX21PortGrpEntry 15 }
|
|
|
|
x21portDeleteSvcs OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
delete(1),
|
|
other(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Setting this object to 1 indicates that all the SVC
|
|
connections on the given port has to be deleted."
|
|
::= { frPortCnfX21PortGrpEntry 16 }
|
|
|
|
x21portIngrSvcBandW OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents Ingress Bandwidth reserve for SVC."
|
|
::= { frPortCnfX21PortGrpEntry 17 }
|
|
|
|
x21portEgrSvcBandW OBJECT-TYPE
|
|
SYNTAX Integer32 (0..2147483647)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This represents Egress Bandwidth reserve for SVC."
|
|
::= { frPortCnfX21PortGrpEntry 18 }
|
|
|
|
|
|
-- *********************************************************************
|
|
-- x21AlmConfig group
|
|
--
|
|
-- This group contains X.21/HSSI line alarm configuration table
|
|
--
|
|
-- *********************************************************************
|
|
|
|
x21AlmCnfGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF X21AlmCnfGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The FRSM-HS1/HS2 interface alarm configuration table."
|
|
::= { x21AlmCnfGrp 1 }
|
|
|
|
x21AlmCnfGrpEntry OBJECT-TYPE
|
|
SYNTAX X21AlmCnfGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the X.21/HSSI Alarm
|
|
Configuration table."
|
|
INDEX { x21AlmCnfLineNum }
|
|
::= { x21AlmCnfGrpTable 1 }
|
|
|
|
X21AlmCnfGrpEntry ::=
|
|
SEQUENCE {
|
|
x21AlmCnfLineNum Integer32,
|
|
x21Severity INTEGER
|
|
}
|
|
|
|
x21AlmCnfLineNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"X.21/HSSI line number.
|
|
|
|
FRSM-HS2/HS2B-HSSI supports a range from 1 to 2.
|
|
FRSM-HS2B-12IN1 supports a range from 1 to 8."
|
|
::= { x21AlmCnfGrpEntry 1 }
|
|
|
|
x21Severity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
minor(1),
|
|
major(2),
|
|
dontcare(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to setup the severity of
|
|
LOS(Loss of Signal) or clock mismatch alarm.
|
|
Whenever the above condition arises, the
|
|
FRSM-HS1/HS2/HS2B will send the alarm with
|
|
appropriate status."
|
|
::= { x21AlmCnfGrpEntry 2 }
|
|
|
|
|
|
-- *********************************************************************
|
|
--
|
|
-- X.21/HSSI Alarm Group
|
|
--
|
|
-- This group contains X.21/HSSI line alarm table
|
|
--
|
|
-- *********************************************************************
|
|
|
|
x21AlmGrpTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF X21AlmGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The X.21/HSSI interface alarm configuration table."
|
|
::= { x21AlmGrp 1 }
|
|
|
|
x21AlmGrpEntry OBJECT-TYPE
|
|
SYNTAX X21AlmGrpEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in the X21 Alarm table"
|
|
INDEX { x21AlmLineNum }
|
|
::= { x21AlmGrpTable 1 }
|
|
|
|
X21AlmGrpEntry ::=
|
|
SEQUENCE {
|
|
x21AlmLineNum Integer32,
|
|
x21LineAlarmState Integer32,
|
|
x21LineEIAStatus Integer32,
|
|
x21AlarmClrButton INTEGER
|
|
}
|
|
|
|
x21AlmLineNum OBJECT-TYPE
|
|
SYNTAX Integer32 (1..8)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is the identifier (line number) of a
|
|
X.21/HSSI interface. The value for this object must
|
|
be same as the value of x21LineNum."
|
|
::= { x21AlmGrpEntry 1 }
|
|
|
|
x21LineAlarmState OBJECT-TYPE
|
|
SYNTAX Integer32 (0..1023)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is a bitmap of the X21 Line ALarms
|
|
on the FRSM-HS1. A value of zero indicates no alarms.
|
|
Itemized below are the individual bits:
|
|
BitPosition Alarm
|
|
----------- -----
|
|
0 C/I signal is OFF (also used to indicate LOS)
|
|
1 Clock rate mismatch (used in DTE mode)
|
|
2 Internal Loopback (diagnostic loopback)
|
|
3 HSSI Local LoopA (line is in loopback)
|
|
4 HSSI Local LoopB (line is in loopback)
|
|
5 Remote Loopback (line is transmitting loopcodes)
|
|
6 For V35 DTE mode, DCD and CTS both are inactive
|
|
7 For V35 DCE mode, RTS is inactive
|
|
8 No cable attached to V35 backcard
|
|
9 Wrong cable attached to V35 backcard
|
|
If all the bit-states are 0s:
|
|
- line is not in alarm, or
|
|
- line not in loopback, or
|
|
- line is transmitting any loopback codes.
|
|
"
|
|
::= { x21AlmGrpEntry 2 }
|
|
|
|
x21LineEIAStatus OBJECT-TYPE
|
|
SYNTAX Integer32 (0..'10'h)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the status of X.21/HSSI lines:
|
|
0x01 -- c-lead high
|
|
0x02 -- i-lead high
|
|
0x04 -- LC-lead high (valid only for HSSI DCE mode)."
|
|
::= { x21AlmGrpEntry 3 }
|
|
|
|
x21AlarmClrButton OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noaction (1),
|
|
clear (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to clear all the
|
|
alarms for the line.
|
|
1 = No action
|
|
2 = Clear alarm."
|
|
::= { x21AlmGrpEntry 4 }
|
|
|
|
-- conformance information
|
|
|
|
cwfX21MIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrX21MIB 2 }
|
|
|
|
cwfX21MIBGroups OBJECT IDENTIFIER ::= { cwfX21MIBConformance 1 }
|
|
|
|
cwfX21MIBCompliances OBJECT IDENTIFIER ::= { cwfX21MIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
cwfX21Compliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for objects related
|
|
to Frame Relay Ports."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
ciscoWanFrX21LineGroup,
|
|
ciscoWanFrX21PortGroup,
|
|
ciscoWanFrX21AlarmConfGroup,
|
|
ciscoWanFrX21AlarmGroup
|
|
}
|
|
::= { cwfX21MIBCompliances 1 }
|
|
|
|
ciscoWanFrX21PortGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
x21portNum,
|
|
x21portLineNum,
|
|
x21portRowStatus,
|
|
x21portFlagsBetweenFrames,
|
|
x21portEqueueServiceRatio,
|
|
x21portSpeed,
|
|
x21portAdmin,
|
|
x21portType,
|
|
x21portSvcStatus,
|
|
x21portSvcInUse,
|
|
x21portSvcShareLcn,
|
|
x21portSvcLcnLow,
|
|
x21portSvcLcnHigh,
|
|
x21portSvcDlciLow,
|
|
x21portSvcDlciHigh,
|
|
x21portDeleteSvcs,
|
|
x21portIngrSvcBandW,
|
|
x21portEgrSvcBandW
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are applicable
|
|
for X21 ports in frame relay."
|
|
::= { cwfX21MIBGroups 1 }
|
|
|
|
ciscoWanFrX21LineGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
x21LineNum,
|
|
x21LineEnable,
|
|
x21LineType,
|
|
x21LineRate,
|
|
x21LineLoopbackCommand,
|
|
x21LineSendCode,
|
|
x21LineLoopbackCodeDetection,
|
|
x21ConnectorType,
|
|
x21InvertClock,
|
|
x21LineInterfaceType,
|
|
x21ClkFrequencyThreshold,
|
|
serialLineRate,
|
|
serialLineRateVariation,
|
|
x21LineNumofValidEntries
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are related
|
|
to x21 lines."
|
|
::= { cwfX21MIBGroups 2 }
|
|
|
|
ciscoWanFrX21AlarmConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
x21AlmCnfLineNum,
|
|
x21Severity
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are related
|
|
to x21 lines."
|
|
::= { cwfX21MIBGroups 3 }
|
|
|
|
ciscoWanFrX21AlarmGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
x21AlmLineNum,
|
|
x21LineAlarmState,
|
|
x21LineEIAStatus,
|
|
x21AlarmClrButton
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are related
|
|
to x21 lines."
|
|
::= { cwfX21MIBGroups 4 }
|
|
END
|