MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-FR-RSRC-PART-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

274 lines
8.4 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ciscoWanFrRsrcPartMIB
--
-- September 2002, Subra Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-WAN-FR-RSRC-PART-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
frPortCnfResPartGrp FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoWanFrRsrcPartMIB MODULE-IDENTITY
LAST-UPDATED "200209040000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module to configure the resource partition
on Frame Relay Ports.
Terminlogies used:
LCN : Logical Connection Number.
DLCI : Data Link Connection Identifier.
A unique number assigned to a PVC endpoint in
a frame relay network. This identifies a particular
PVC endpoint within a user's access channel in a
frame relay network and has local significance only
to that channel."
REVISION "200209040000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 45 }
-- ***********************************************************************
--
--
-- LOGICAL PORT CONFIG Resource Partition Group
--
--
-- ***********************************************************************
frPortCnfResPartGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortCnfResPartGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring resource partition
parameters. A resource partition is configured
on frame relay port. The frame relay port
if available in ifTable is identified by ifType
values frameRelayService(44) and frForward(158)."
::= {frPortCnfResPartGrp 1}
frPortCnfResPartGrpEntry OBJECT-TYPE
SYNTAX FrPortCnfResPartGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a resource partition. A resource
partition has to be created before connections
can be added on a frame relay port."
INDEX { frResPartPortNum, frResPartCtrlrNum }
::= { frPortCnfResPartGrpTable 1 }
FrPortCnfResPartGrpEntry ::=
SEQUENCE {
frResPartPortNum Integer32,
frResPartCtrlrNum INTEGER,
frResPartRowStatus INTEGER,
frResPartNumOfLcnAvail Integer32,
frResPartDlciLow Integer32,
frResPartDlciHigh Integer32,
frResPartIngrPctBW Integer32,
frResPartEgrPctBW Integer32,
frResPartCtrlrID Integer32
}
frResPartPortNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.
If frame relay port is available in ifTable,
then the value of this object must be same as the
ifIndex value of frame relay ports with
ifType frameRelayService(44) and frForward(158)."
REFERENCE
"portNum object in CISCO-WAN-FR-PORT-MIB.my"
::= { frPortCnfResPartGrpEntry 1 }
frResPartCtrlrNum OBJECT-TYPE
SYNTAX INTEGER {
par (1),
pnni(2),
tag (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the controller
which can be used for accessing the resources.
The possible values are :
par(1) : Portable Auto Route controller.
: This value is applicable in Release 1.x.
pnni(2): PNNI Controller.
: This value is applicable in Release 2.x.
tag(3) : MPLS(Formerly known as Tag Switch)Controller
"
::= { frPortCnfResPartGrpEntry 2 }
frResPartRowStatus OBJECT-TYPE
SYNTAX INTEGER {
add (1),
del (2),
mod (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for adding/deleting/modifying
resource partition on a frame relay port.
In MGX Release 1.x:
To add an entry, this object should be set to add, value for
other objects should not be specified. FRSM will choose
default values for all other objects.
In MGX Release 2.x:
To add an entry, this object should be set to add, value
for frResPartCtrlrID may be specified. FRSM will choose
default values for all other objects.
To delete an entry, this object has to be set to del.
Currently the value mod is not supported.
The resource partition can be deleted only after
deleting all the connections (LCNs)."
::= { frPortCnfResPartGrpEntry 3 }
frResPartNumOfLcnAvail OBJECT-TYPE
SYNTAX Integer32 (0..16000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This represents number of LCNs available for this
controller and this port.
FRSM VHS 2CT3 can support LCNs upto 4000.
FRSM12 can support LCNs upto 16000.
"
::= { frPortCnfResPartGrpEntry 4 }
frResPartDlciLow OBJECT-TYPE
SYNTAX Integer32 (0..8388607)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents low end of reserved DLCI."
::= { frPortCnfResPartGrpEntry 5 }
frResPartDlciHigh OBJECT-TYPE
SYNTAX Integer32 (0..8388607)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents high end of reserved DLCI."
::= { frPortCnfResPartGrpEntry 6 }
frResPartIngrPctBW OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percentage"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The percentage of total ingress bandwidth reserved."
::= { frPortCnfResPartGrpEntry 7 }
frResPartEgrPctBW OBJECT-TYPE
SYNTAX Integer32 (0..100)
UNITS "percentage"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The percentage of total egress bandwidth reserved."
::= { frPortCnfResPartGrpEntry 8 }
frResPartCtrlrID OBJECT-TYPE
SYNTAX Integer32(1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the controller identifier for the
resource patition.
The default value is set for PNNI controller.
Refer object frResPartCtrlrNum."
DEFVAL { 2 }
::= { frPortCnfResPartGrpEntry 9 }
-- conformance information
cwfRsrcPartMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrRsrcPartMIB 2 }
cwfRsrcPartMIBCompliances OBJECT IDENTIFIER ::= { cwfRsrcPartMIBConformance 1 }
cwfRsrcPartMIBGroups OBJECT IDENTIFIER ::= { cwfRsrcPartMIBConformance 2 }
-- compliance statements
ciscoWanFrRsrcPartCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the Frame Relay Resource Partition MIB."
MODULE -- this module
MANDATORY-GROUPS { ciscoWanFrRsrcPartGroup }
::= { cwfRsrcPartMIBCompliances 1 }
ciscoWanFrRsrcPartGroup OBJECT-GROUP
OBJECTS {
frResPartPortNum,
frResPartCtrlrNum,
frResPartRowStatus,
frResPartNumOfLcnAvail,
frResPartDlciLow,
frResPartDlciHigh,
frResPartIngrPctBW,
frResPartEgrPctBW,
frResPartCtrlrID
}
STATUS current
DESCRIPTION
"A collection of objects providing the
Frame Relay Port resource partition configuration
information."
::= { cwfRsrcPartMIBGroups 1 }
END
Reference in New Issue View Git Blame Copy Permalink