MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-FR-PORT-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1895 lines
56 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ciscoWanFrPortMIB
--
-- October 2002, Subra Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- ****************************************************************
CISCO-WAN-FR-PORT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
frPort,
frPortCnf,
frPortCnt,
frPortServiceQueGrp FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoWanFrPortMIB MODULE-IDENTITY
LAST-UPDATED "200210170000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module to create/configure frame relay
ports/interfaces. This module contains tables related to
frame relay port states and statistics.
The frame relay logical port is referred to as
'frame relay port' in this mib.
Terminologies Used:
Channel : Generically refers to the user access channel
across which frame relay data travels. This
is also referred to use logical port/interface
in this MIB.
Within a given T1 or E1 physical line, a channel
can be one of the following, depending on how the
line is configured.
Unchannelized :
The Entire T1/E1 line is considered a channel, where:
* The T1 line operates at the speed of 1.536 Mbps and
is single channel consisting of 24 T1 time slots.
* The E1 line operates at the speed of 1.984 Mbps and
is single channel consisting of 31 T1 time slots.
Channelized:
The channel is any one of the N time slots within a
given line, where:
* The T1 line consists of any one or more channels.
Each channel is any one of 24 time slots.
* The E1 line consists of one or more channels.
Each channel is any one of 31 time slots.
Fractional:
The T1/E1 channel is one of the following groupings of
consecutively or nonconsecutively assigned time slots:
* N T1 time slots(N*56/64Kbps where N=1-23 T1 Time slots
per FT1 channel.
* N E1 time slots(N*64Kbps where N=1-30 Time slots
per E1: channel.
SVC : Switched Virtual Circuits.
SVCs allow access through a Frame Relay
Network by setting up a path to the destination
endpoints only when the need arises and
tearing down the path when it is no longer
needed.
Refer ITU Q.933 and Q.922
FECN : Forward Explicit Congestion Notification
A bit set by a frame relay network to notify an
interface device(DTE) that congestion avoidance
procedures should be initiated by the receiving
device.
BECN : Backward Explicit Congestion Notification
A bit set by a frame relay network to notify an
interface device(DTE) that congestion avoidance
procedures should be initiated by the sending
device.
DE : Discard Eligibility
A user-bit set indicating that a frame may be
discarded in preference to other frames if
congestion occurs, to maintain the committed
quality of service within the network. Frames
with the DE bit set are considered Be(Excess
Burst Size)excess data.
Unchannelized Service Modules:
Following Service Modules does not support channelized
interfaces(i.e supports only unchannelized).
FRSM-VHS : FRSM-2T3/2E3, FRSM-HS2/HS2B, FRSM-T3B/E3B
For following service modules, ifTable is supported:
FRSM-12.
"
REVISION "200210170000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 44 }
frPortCnfPortGrp OBJECT IDENTIFIER ::= { frPortCnf 1 }
frPortStateGrp OBJECT IDENTIFIER ::= { frPort 3 }
frPortCntPortGrp OBJECT IDENTIFIER ::= { frPortCnt 1 }
-- *******************************************************************
--
-- LOGICAL PORT CONFIG Group
--
-- *******************************************************************
frPortCnfPortGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortCnfPortGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used for creating/configuring
Frame Relay Logical(referred to as frame relay port)Ports.
Relation with ifTable:
The modules in which ifTable is implemented,
the creation of frame relay port in this table
will cause an entry to be created in ifTable.
The possible interfaces that are created in
ifTable are identified by ifType = frameRelayService(44)
and frForward(158).
The deletion of an entry in this table causes
the corresponding entry in ifTable to be deleted.
"
::= { frPortCnfPortGrp 1 }
frPortCnfPortGrpEntry OBJECT-TYPE
SYNTAX FrPortCnfPortGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the frame relay port table."
INDEX { portNum }
::= { frPortCnfPortGrpTable 1 }
FrPortCnfPortGrpEntry ::=
SEQUENCE {
portNum Integer32,
portLineNum Integer32,
portRowStatus INTEGER,
portDs0ConfigBitMap Integer32,
portDs0Speed INTEGER,
portFlagsBetweenFrames Integer32,
portEqueueServiceRatio Integer32,
portSpeed Integer32,
portAdmin INTEGER,
portType INTEGER,
portSvcStatus INTEGER,
portSvcInUse INTEGER,
portSvcShareLcn INTEGER,
portSvcLcnLow Integer32,
portSvcLcnHigh Integer32,
portSvcDlciLow Integer32,
portSvcDlciHigh Integer32,
portDeleteSvcs INTEGER,
portIngrSvcBandW Integer32,
portEgrSvcBandW Integer32,
portBERTEnable INTEGER,
portEnhancedSIW INTEGER,
portM32EgrQueueThresh Integer32,
portHeaderLen INTEGER,
portFrameChkSumType INTEGER,
portFileId Integer32,
portOverSubEnable INTEGER
}
portNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the frame relay(logical) port number.
For Service Modules, supporting ifTable, this
must be the ifIndex value of the frame relay port.
The port number value supported depends upon the
following for each Service Module:
- type(Channelized, Unchannelized, Fractional etc)
of physical line and number of physical lines
- Number of physical line supported
- Limitations due to Service Module Hardware components.
Port Number mapping is as follows:
(NOTE: All the Supported Service Module information is
not provided here).
T1(channelized) : 24 Time Slots * Max #Lines Supported.
Example: 8 Port Service Module - 1..192(24*8)
E1(channelized) : 31 Time Slots * Max #Lines Supported.
Example: 8 Port Service Module - 1..248(31*8)
T3 Channelized :
Example: 2CT3 Service Module: 1-256(Limited by hardware)
Unchannelized VHS : Range is 1-2
(T3/E3/HS2/T3B/E3B/HS2B-HSSI)
FRSM-HS2B-12IN1 : Range is 1-8
FRSM-12 : same as ifIndex value.
With the above convention, Port Number mapping
is as follows:
T1 Service Module : Range is 1-192.
E1 Service Module : Range is 1-248.
2CT3 Service Module : Range is 1-256
NOTE:
For other Service Modules(Where ifTable is supported):
This value for this object must be same as the
ifIndex value for the frame relay port ifTable.
The frame relay ports identified by ifType values
frameRelayService(44) and frForward(158) are
valid for this object.
Since, Frame Relay Port table is used for creating
entries in ifTable, it sounds odd to specify ifIndex
value for this object, even before creating the
ifTable entries!.
The reason(s) for this is as follows:
- There are tables in other frame relay mibs,
which are indexed by auxiliary objects(objects
which are both specified in the INDEX clause
and columnar objects of the same row) whose
value is supposed to be same as 'portNum'.
These MIBs have been used earlier by NMS Applications
for the other product lines(MGX8250, MGX8220 etc).
- The same frame relay tables in used in other
products has been decided to use in new
products(for example MGX8850 with FRSM-12 Service Module).
It is a requirement that ifTable must be supported
in New Service Modules.
If we use ifIndex value of the frame relay port
(after creation) in other tables(FR Port Stats, FR R
Resource Partition or FR Connection etc), and if ifIndex
value is different than 'portNum', then it will
break the NMS applications which have been
using this MIB with the assumptions that 'portNum'
and INDEXes(For example: frResPartPortNum,
lmiCnfPortNum, etc) are same.
To avoid this confusion, it is required that
'portNum' value must be same as 'ifIndex' of
the frame relay port.
"
REFERENCE
"CISCO-MGX8800-IF-MAPPING-MIB.my to get the ifIndex
value of a port even before it appears in ifTable."
::= { frPortCnfPortGrpEntry 1}
portLineNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the physical line number
on which the frame relay port need to be created.
For Service Modules, supporting ifTable, this
must be the ifIndex value of the physical line
or logical interface. The ifIndex entries in
ifTable applicable to this category are identified
by ifType values of ds3(30), ds1(18)."
::= { frPortCnfPortGrpEntry 2}
portRowStatus OBJECT-TYPE
SYNTAX INTEGER {
add(1),
del(2),
mod(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used for creating
modifying or deleting frame relay ports.
The possible values are :
add(1) : Create frame relay port
del(2) : Delete frame relay port
mod(3) : Modify the frame relay port. This value
is required to be set in Some Older Service Modules
(FRSM-8T1/E1, FRSM-VHS, FRSM-HS2B etc) to
modify the port parameters.
In some service modules, when the port is successfully
created(add(1)), this object is set internally to
mod(3). The reason for this is, one can modify
parameters of the port without requiring to go
through an explicit mod(3) to modify the parameters."
::= { frPortCnfPortGrpEntry 3 }
portDs0ConfigBitMap OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This respesents bit map of DS0s for a line/interface
which are used to form this logical port.
The Bit 0 represents DS0-1(First DS0 timeslot).
This object is not applicable for unchannelized
service modules. In case of unchannelized interfaces,
this field carries the value of 'ffffff'h."
::= { frPortCnfPortGrpEntry 4 }
portDs0Speed OBJECT-TYPE
SYNTAX INTEGER {
speed56k (1),
speed64k (2),
unUsed (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used for
configuring the port speed(or data rate) of
Ds0 in frame relay port.
speed56k(1) : set to 56k
speed64k(2) : set to 64k
unUsed(3) : Not applicable.
This field is not applicable for unchannelized
interfaces/ports. In case of unchannelized interfaces
this object is set to 'unUsed' always.
This object can be specified only during
port creation."
DEFVAL { speed64k }
::= { frPortCnfPortGrpEntry 5 }
portFlagsBetweenFrames OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of flags transmitted between FR frames
For FRSM12 card:
Only the values 1 to 8 are supported. The mapping is as follows:
MIB object value No. of HDLC flags inserted
1 1
2 2
3 4
4 8
5 16
6 32
7 64
8 128
This object can not be modified if there are any
frame relay connections that are configured on the port."
DEFVAL { 1 }
::= { frPortCnfPortGrpEntry 6 }
portEqueueServiceRatio OBJECT-TYPE
SYNTAX Integer32 (0..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of times queue 1 is serviced
for every time queue 2 is serviced.
The value 0 is supported only by FRSM-VHS.
FRSM-VHS supports two different egress queue
servicing algorithms depending on the Egress
Qos Feature.
if EgrQosFeature is ENABLED, Weighted Fair
queueing algorithm will be used to select
one queue out of 4 data queues and this
object will be set to a default value of
0 in this case and this value cannot be
modified by user.
In case of EgrQosFeature being DISABLED,
this object will be set to a default value
of 1 and can be configured to user desired
value. This value will be used to decide
number of times High priority queue has
to be serviced for every time low priority
queue is serviced.
For FRSM12 card:
There is only one scheme of egress scheduling of COS queues
within ports, which uses only two COS queues for user data.
The scheduling scheme uses a pre-defined ratio to schedule
these COS queues on a given port. This object will be
used to decide number of times High priority queue
has to be serviced for every time low priority queue
is serviced."
DEFVAL { 1 }
::= { frPortCnfPortGrpEntry 7 }
portSpeed OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object contains the
Configured speed of port."
::= { frPortCnfPortGrpEntry 8 }
portAdmin OBJECT-TYPE
SYNTAX INTEGER {
up (1),
down (2),
write-Only (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used for
changing the desired state of the port.
up(1) : Up the port;Admin up
down(2) : Down the port;Admin down
For Service Modules, supporting ifTable, this
is equivalent to 'ifAdminStatus' object. The write-only
is not supported in these cases."
::= { frPortCnfPortGrpEntry 9 }
portType OBJECT-TYPE
SYNTAX INTEGER {
frame-relay (1),
frFUNI (2),
frame-forward (3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the network
interface for this frame relay port.
The Possible values are:
frame-relay(1) : Frame Relay Service Port
frFUNI (2) : Frame based UNI Port.
when a frame arrives from the FUNI interface
the 2 byte FUNI header is removed and
frame is segmented into ATM Cells by using
AAL5.
frame-forward(3): Frame Forward Port.
In this case 2 byte Q.922 header is not assumed
or interpreted. The signaling(LMI) parameters
are not applicable for these ports.
Relationship with ifTable:
The service modules in which ifTable is
implemented following side-effects will
take place.
For value frame-relay(1) an ifTable entry with
ifType = frameRelayService(44) will be created.
For value frame-forward(3) an ifTable entry with
ifType = frForward(158) will be created.
This object can not be modified after the port
is created."
DEFVAL { frame-relay }
::= { frPortCnfPortGrpEntry 10 }
portSvcStatus OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used for enabling/disabling
the SVC operation on a frame relay port.
For FRSM12 card: Not Supported "
::= { frPortCnfPortGrpEntry 11 }
portSvcInUse OBJECT-TYPE
SYNTAX INTEGER {
not-use (1),
in-use (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used for representing
whether SVC is in use or not.
For FRSM12 card: Not Supported
"
::= { frPortCnfPortGrpEntry 12 }
portSvcShareLcn OBJECT-TYPE
SYNTAX INTEGER {
port-based(1),
card-based(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the
SVC shared LCN type.
For FRSM12 card: Not Supported
"
::= { frPortCnfPortGrpEntry 13 }
portSvcLcnLow OBJECT-TYPE
SYNTAX Integer32 (16..4015)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the
low end of the reserved LCN for SVC.
For FRSM12 card: Not Supported
"
::= { frPortCnfPortGrpEntry 14 }
portSvcLcnHigh OBJECT-TYPE
SYNTAX Integer32 (16..4015)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the
high end of reserved LCN for SVC.
For FRSM12 card: Not Supported
"
::= { frPortCnfPortGrpEntry 15 }
portSvcDlciLow OBJECT-TYPE
SYNTAX Integer32 (0..1023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the
low end of reserved DLCI for SVC.
For FRSM12 card: Not Supported."
::= { frPortCnfPortGrpEntry 16 }
portSvcDlciHigh OBJECT-TYPE
SYNTAX Integer32 (0..1023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the
high end of reserved DLCI for SVC.
For FRSM12 card: Not Supported."
::= { frPortCnfPortGrpEntry 17 }
portDeleteSvcs OBJECT-TYPE
SYNTAX INTEGER {
delete (1),
other (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object indicates
that all the SVC connections on a given frame
relay port has to be deleted.
For FRSM12 card: Not Supported
"
::= { frPortCnfPortGrpEntry 18 }
portIngrSvcBandW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the
Ingress bandwidth reserved for SVC.
For FRSM12 card: Not Supported
"
::= { frPortCnfPortGrpEntry 19 }
portEgrSvcBandW OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the
Egress bandwidth reserved for SVC.
For FRSM12 card: Not Supported."
::= { frPortCnfPortGrpEntry 20 }
portBERTEnable OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object enables/disables the
Bit Error Rate Testing (BERT) on the frame
relay port.
For FRSM12 card: Not Supported
"
DEFVAL { disable }
::= { frPortCnfPortGrpEntry 21 }
portEnhancedSIW OBJECT-TYPE
SYNTAX INTEGER {
disable (1),
enable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variable enables/disables enhanced SIW feature.
Enabling this permits support for SIW translation of
Appletalk. This feature is supported only in
the FRSM-VHS card.
This object is not required in FRSM12 since Appletalk is
supported by default in FRF.8.1 and FRSM12 supports FRF.8.1
"
DEFVAL {disable}
::= { frPortCnfPortGrpEntry 22 }
portM32EgrQueueThresh OBJECT-TYPE
SYNTAX Integer32 (1..6000)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This represents the M32 logical port Egress Queue
threshold in bytes. Frames will not be queued
until the number of bytes in the queue is less than
the threshold. The default value is 6000. Using a very low
value could under utilize the logical port.
This is supported in FRSM 8t1e1 and FRSM 4t1e1
Service Modules only."
DEFVAL { 6000 }
::= { frPortCnfPortGrpEntry 23 }
portHeaderLen OBJECT-TYPE
SYNTAX INTEGER {
twoOctets (1),
fourOctets (2)
}
UNITS "Octets"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the
Q.922 address field length and DLCI length
for this UNI/NNI logical port.
This object can not be modified if there are any
frame relay connections that are configured on the port.
This object is not applicable to MGX Release 1.x.
"
REFERENCE
"Q.922 [25]"
DEFVAL { twoOctets }
::= { frPortCnfPortGrpEntry 24 }
portFrameChkSumType OBJECT-TYPE
SYNTAX INTEGER {
crc16(1),
crc32(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the CRC Length
in the HDLC Packet. Applicable for FrameForwarding
ports only.
This object can not be modified if there are any
frame relay connections that are configured on the port.
This object is not applicable to MGX Release 1.x.
"
DEFVAL { crc16 }
::= { frPortCnfPortGrpEntry 25 }
portFileId OBJECT-TYPE
SYNTAX Integer32(0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the
Service Class Template(SCT) file ID.
The SCT holds the module specific configuration
parameters for the frame relay port.
This object is not applicable to MGX Release 1.x."
DEFVAL { 0 }
::= { frPortCnfPortGrpEntry 26 }
portOverSubEnable OBJECT-TYPE
SYNTAX INTEGER {
enable (1),
disable (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The value of this object enables/disables the
port to be over subscribed.
This object is not applicable to MGX Release 1.x.
"
DEFVAL { disable }
::= { frPortCnfPortGrpEntry 27 }
-- PORT usage scalars
-- These scalars are not used in FRSM-VHS and FRSM12
portsUsedLine1 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1,
the most significant byte is invalid for DS1.
This is for line."
::= { frPortCnfPortGrp 2 }
portsUsedLine2 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1,
the most significant byte is invalid for DS1.
This is for line 2."
::= { frPortCnfPortGrp 3 }
portsUsedLine3 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1.
The most significant byte is invalid for DS1.
This is for line 3."
::= { frPortCnfPortGrp 4 }
portsUsedLine4 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1.
The most significant byte is invalid for DS1.
This is for line 4."
::= { frPortCnfPortGrp 5 }
portsUsedLine5 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1.
The most significant byte is invalid for DS1.
This is for line 5."
::= { frPortCnfPortGrp 7 }
portsUsedLine6 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1.
The most significant byte is invalid for DS1.
This is for line 6."
::= { frPortCnfPortGrp 8 }
portsUsedLine7 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1.
The most significant byte is invalid for DS1.
This is for line 7."
::= { frPortCnfPortGrp 9 }
portsUsedLine8 OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Each bits set represents a DS0 that is used by
all the logical ports defined so far for that DS1.
The most significant byte is invalid for DS1.
This is for line 8."
::= { frPortCnfPortGrp 10 }
--
-- Next available port
--
portNextAvailable OBJECT-TYPE
SYNTAX Integer32 (0..256)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable contains the next UNUSED logical port number.
This number can be used in channel config table, the
portNextAvailable gets updated if the number gets
used to create a logical port.
A '0' indicates that no more ports are available.
For FRSM12 Card: Not Supported
"
::= { frPortCnfPortGrp 6 }
-- ------------------------------------------------------------------------
--
-- Group frChannelState
-- Contains status information for channels
--
-- ------------------------------------------------------------------------
frPortStateGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortStateGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of transmit/receive states of ports.
"
::= { frPortStateGrp 1 }
frPortStateGrpEntry OBJECT-TYPE
SYNTAX FrPortStateGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for logical port.
"
INDEX { statePortNum }
::= { frPortStateGrpTable 1 }
FrPortStateGrpEntry ::=
SEQUENCE {
statePortNum Integer32,
portState INTEGER,
portSignallingState Integer32,
portOversubscribed INTEGER,
portIngrPercentUtil Integer32,
portEgrPercentUtil Integer32
}
statePortNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the frame relay(logical) port number.
The value of this object must match with the
value of object 'portNum' in frPortCnfPortGrpTable."
::= { frPortStateGrpEntry 1}
portState OBJECT-TYPE
SYNTAX INTEGER {
notConfigured (1),
active (2),
remoteLoopback (3),
failedDueToLine (4),
failedDueToSignalling (5),
inactive (6),
inBert (7),
farEndRemoteLoopback (8),
latchDS0DropFeLoop (9),
latchDS0LineFeLoop (10),
latchOcuFeLoop (11),
latchCsuFeLoop (12),
latchDsuFeLoop (13),
latchHL96FeLoop (14),
v54PolynomialFeLoop (15)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the state of the
logical port
"
::= { frPortStateGrpEntry 2}
portSignallingState OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit 0 = 0 -> LMI O.K. or not enabled
Bit 0 = 1 -> LMI failed
Bit 1 = 0 -> CLLM O.K. or not enabled
Bit 1 = 1 -> CLLM failed
"
::= { frPortStateGrpEntry 3}
portOversubscribed OBJECT-TYPE
SYNTAX INTEGER {
false (1),
true (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This variable indicates the whether the port is
over subscribed or not."
::= { frPortStateGrpEntry 4}
portIngrPercentUtil OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage Utilization of the Port in the Ingress
direction."
::= { frPortStateGrpEntry 5}
portEgrPercentUtil OBJECT-TYPE
SYNTAX Integer32 (0..1000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Percentage Utilization of the Port in the Egress
direction."
::= { frPortStateGrpEntry 6}
-- ------------------------------------------------------------------------
--
-- frPortCounters group
-- Channel OR VC COUNTERS
--
-- ------------------------------------------------------------------------
frPortCntPortGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortCntPortGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The config table is for logical port interface
there are upto 248 entries (for 8 E1s) or 192
(for 8 T1s). In FRSM-VHS, there is support for
upto 256 entries.
"
::= { frPortCntPortGrp 1 }
frPortCntPortGrpEntry OBJECT-TYPE
SYNTAX FrPortCntPortGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry for logical port
"
INDEX { cntPortNum }
::= { frPortCntPortGrpTable 1}
FrPortCntPortGrpEntry ::=
SEQUENCE {
cntPortNum Integer32,
-- Rcv Counters
rcvPortFrames Counter32,
rcvPortBytes Counter32,
rcvPortFramesDE Counter32,
rcvPortFramesFECN Counter32,
rcvPortFramesBECN Counter32,
-- Discarded due to
rcvFramesDiscCRCError Counter32,
rcvFramesDiscAlignmentError Counter32,
rcvFramesDiscIllegalLen Counter32,
rcvFramesDiscIllegalHeader Counter32,
rcvFramesAbort Counter32,
rcvFramesUnknownDLCI Counter32,
rcvLastUnknownDLCI Integer32,
-- Rcv Congestion
rcvPortFramesTaggedFECN Counter32,
rcvPortFramesTaggedBECN Counter32,
rcvPortFramesTaggedDE Counter32,
rcvPortFramesDiscXceedDEThresh Counter32,
rcvPortKbpsAIR Integer32,
rcvBufNotAvailable Counter32,
-- Xmt Counters
xmtPortFrames Counter32,
xmtPortBytes Counter32,
xmtPortFramesFECN Counter32,
xmtPortFramesBECN Counter32,
xmtPortFramesDiscXceedQDepth Counter32,
xmtPortBytesDiscXceedQDepth Counter32,
xmtPortFramesDuringLMIAlarm Counter32,
xmtPortBytesDuringLMIAlarm Counter32,
xmtFramesAbort Counter32,
xmtFramesUnderrun Counter32,
xmtPortKbpsAIR Integer32,
xmtBufNotAvailable Counter32,
portClrButton INTEGER,
rcvFramesDiscNoChan Counter32,
rcvFramesDiscOverrun Counter32,
rcvPortFramesDiscard Counter32,
xmtPortFramesDE Counter32,
xmtPortBytesDE Counter32,
rcvPortBytesDE Counter32,
xmtPortFramesDiscXceedDEThresh Counter32,
xmtPortBytesDiscXceedDEThresh Counter32,
rcvPortBytesDiscXceedDEThresh Counter32
}
cntPortNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the frame relay(logical) port number.
The value of this object must be same as the
value of object 'portNum' in frPortCnfPortGrpTable."
::= { frPortCntPortGrpEntry 1}
rcvPortFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames Received on the ingress."
::= { frPortCntPortGrpEntry 2 }
rcvPortBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes Received on the ingress."
::= { frPortCntPortGrpEntry 3 }
rcvPortFramesDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames with DE bit set
received on the ingress."
::= { frPortCntPortGrpEntry 4 }
rcvPortFramesFECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames with FECN bit set
received on the ingress."
::= { frPortCntPortGrpEntry 5 }
rcvPortFramesBECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames with BECN bit set
received on the ingress."
::= { frPortCntPortGrpEntry 6 }
rcvFramesDiscCRCError OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to CRC error."
::= { frPortCntPortGrpEntry 7 }
rcvFramesDiscAlignmentError OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to Alignment error."
::= { frPortCntPortGrpEntry 8 }
rcvFramesDiscIllegalLen OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to illegal length."
::= { frPortCntPortGrpEntry 9 }
rcvFramesDiscIllegalHeader OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to illegal header."
::= { frPortCntPortGrpEntry 10 }
rcvFramesAbort OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames aborted
"
::= { frPortCntPortGrpEntry 11 }
rcvFramesUnknownDLCI OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received with an unknown DLCI."
::= { frPortCntPortGrpEntry 12 }
rcvLastUnknownDLCI OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last unknown DLCI received."
::= { frPortCntPortGrpEntry 13 }
rcvPortFramesTaggedFECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that were
tagged with FECN bit."
::= { frPortCntPortGrpEntry 14 }
rcvPortFramesTaggedBECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that were
tagged with BECN bit."
::= { frPortCntPortGrpEntry 15 }
rcvPortFramesTaggedDE OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received that were
tagged with DE bit."
::= { frPortCntPortGrpEntry 16 }
rcvPortFramesDiscXceedDEThresh OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the ingress
due to exceeded DE Threshold."
::= { frPortCntPortGrpEntry 17 }
rcvPortKbpsAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Received Average Information Rate in KBPS."
::= { frPortCntPortGrpEntry 18 }
rcvBufNotAvailable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the receiver is turned off
"
::= { frPortCntPortGrpEntry 19 }
xmtPortFrames OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted."
::= { frPortCntPortGrpEntry 20 }
xmtPortBytes OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes transmitted."
::= { frPortCntPortGrpEntry 21 }
xmtPortFramesFECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted with
FECN bit already set."
::= { frPortCntPortGrpEntry 22 }
xmtPortFramesBECN OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted with
BECN bit already set."
::= { frPortCntPortGrpEntry 23 }
xmtPortFramesDiscXceedQDepth OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded on the egress
due to exceeded queue depth
For FRSM12 Card: Not Supported
"
::= { frPortCntPortGrpEntry 24 }
xmtPortBytesDiscXceedQDepth OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes discarded on the egress
due to exceeded queue depth
For FRSM12 Card: Not Supported
"
::= { frPortCntPortGrpEntry 25 }
xmtPortFramesDuringLMIAlarm OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames transmitted during
LMI logical port alarm
"
::= { frPortCntPortGrpEntry 26 }
xmtPortBytesDuringLMIAlarm OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes transmitted during
LMI logical port alarm
"
::= { frPortCntPortGrpEntry 27 }
xmtFramesAbort OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmit frames aborted
For FRSM12 Card: Not Supported
"
::= { frPortCntPortGrpEntry 28 }
xmtFramesUnderrun OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames discarded due to underrun."
::= { frPortCntPortGrpEntry 29 }
xmtPortKbpsAIR OBJECT-TYPE
SYNTAX Integer32
UNITS "Kbps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Transmit Average Information Rate in KBPS."
::= { frPortCntPortGrpEntry 30 }
xmtBufNotAvailable OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the transmitter is turned off
For FRSM12 Card: Not Supported
"
::= { frPortCntPortGrpEntry 31 }
portClrButton OBJECT-TYPE
SYNTAX INTEGER {
noaction (1),
clear (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used for clearing
all the port related statistics counters.
clear(2) : Clears the Counters.
noaction(1) : No action taken."
::= { frPortCntPortGrpEntry 32 }
rcvFramesDiscNoChan OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received when no
channel is setup."
::= { frPortCntPortGrpEntry 33 }
rcvFramesDiscOverrun OBJECT-TYPE
SYNTAX Counter32
UNITS "Frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of frames discarded in Ingress direction
due to FIFO overrun in HDLC Controller.
This object is not applicable to MGX Release 1.x
"
::= { frPortCntPortGrpEntry 34 }
rcvPortFramesDiscard OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of framesdiscarded in the ingress direction by
the port
"
::= { frPortCntPortGrpEntry 35 }
xmtPortFramesDE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of frames transmitted in the egress direction
by the port with DE bit set to 1
"
::= { frPortCntPortGrpEntry 36 }
xmtPortBytesDE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of bytes transmitted in the egress direction
by the port with DE bit set to 1
"
::= { frPortCntPortGrpEntry 37 }
rcvPortBytesDE OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of bytes received in the ingress direction
by the port with DE bit set to 1
"
::= { frPortCntPortGrpEntry 38 }
xmtPortFramesDiscXceedDEThresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of frames discarded in the egress direction
by the port due to exceeded DE Threshold
"
::= { frPortCntPortGrpEntry 39 }
xmtPortBytesDiscXceedDEThresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of bytes discarded in the egress direction
by the port due to exceeded DE Threshold
"
::= { frPortCntPortGrpEntry 40 }
rcvPortBytesDiscXceedDEThresh OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" Number of bytes discarded in the ingress direction
by the port due to exceeded DE Threshold
"
::= { frPortCntPortGrpEntry 41 }
-- Pors Usage table specific to FRSM VHS Card.
frPortsUsedLineGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortsUsedLineGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table Contains information on the DS0 time slots
used in each DS1 interface."
::= { frPortCnfPortGrp 11 }
frPortsUsedLineGrpEntry OBJECT-TYPE
SYNTAX FrPortsUsedLineGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each DS1 interface."
INDEX { frPortsUsedLineIndex }
::= { frPortsUsedLineGrpTable 1 }
FrPortsUsedLineGrpEntry ::=
SEQUENCE {
frPortsUsedLineIndex Integer32,
frPortsUsedLine Integer32
}
frPortsUsedLineIndex OBJECT-TYPE
SYNTAX Integer32(1..56)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object uniquely identifies the
DS1 interface."
::= { frPortsUsedLineGrpEntry 1 }
frPortsUsedLine OBJECT-TYPE
SYNTAX Integer32 (0..'ffffff'h)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object provides the information
on DS0 time slots used by the DS1 identified by
'frPortsUsedLineIndex' object.
A bit set represents a DS0 that is used by all the
logical ports defined so far for DS1 interface.
The most significant byte is invalid for DS1."
::= { frPortsUsedLineGrpEntry 2 }
-- --------------------------------------------------------------------
--
--
-- LOGICAL PORT CONFIG Group
--
--
-- --------------------------------------------------------------------
frPortServiceQueGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortServiceQueGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The config table is for logical port interface.
In FRSM-VHS, there are 256 entries for FRSM-2CT3 card and
2 entries for FRSM-T3/E3/HS2/T3B/E3B/HS2B-HSSI cards and
8 entries for FRSM-HS2B-12IN1. The table is
supported only in FRSM-VHS when the object egrQosFeature
in the cardSpecific group is set to egrQosFeatureEnabled.
"
::= { frPortServiceQueGrp 1 }
frPortServiceQueGrpEntry OBJECT-TYPE
SYNTAX FrPortServiceQueGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry for logical port."
INDEX {frServPortNum, portServiceQueueNo }
::= { frPortServiceQueGrpTable 1 }
FrPortServiceQueGrpEntry ::=
SEQUENCE {
frServPortNum Integer32,
portServiceQueueNo INTEGER,
portEgresQDepth Integer32,
portEgresECNThresh Integer32,
portEgresDEThresh Integer32,
portQBwInc Integer32,
portBytesDiscXceedQueFull Counter32,
portBytesDiscXceedDEThresh Counter32
}
frServPortNum OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the frame relay port number.
The value of this object must match with the
value of object 'portNum' in frPortCnfPortGrpTable."
::= { frPortServiceQueGrpEntry 1}
portServiceQueueNo OBJECT-TYPE
SYNTAX INTEGER{
highpriorityQ (1),
rtVBRQ (2),
nrtVBRandABRQ (3),
uBRQ (4),
queue5 (5),
queue6 (6),
queue7 (7),
queue8 (8)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This identifies the Q depending on the Service Type
1 High Priority Queue
2 rt VBR Queue
3 nrt VBR and ABR Queue
4 UBR Queue
queue5(5) to queue8(8) are reserved for future use
There are 8 queues but only four are being used as of now.
"
::= { frPortServiceQueGrpEntry 2 }
portEgresQDepth OBJECT-TYPE
SYNTAX Integer32(0..2097151)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the peak Egress queue depth for
the frame relay port. The total queue depth of
all connections mapped to this queue should not
exceed this value."
DEFVAL {1048575}
::= { frPortServiceQueGrpEntry 3 }
portEgresECNThresh OBJECT-TYPE
SYNTAX Integer32(0..2097151)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ECN threshold for the frame relay port.
If the total queue depth of all connections
mapped to this port queue exceeds this threshold,
then the appropriate ECN bit (FECN in the downstream direction and
BECN in the upstream direction) get set."
DEFVAL {104857}
::= { frPortServiceQueGrpEntry 4 }
portEgresDEThresh OBJECT-TYPE
SYNTAX Integer32(0..2097151)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"DE threshold for the frame relay port.
If the total queue depth of all connections
mapped to this port queue exceeds this threshold,
and the DE bit is set in the incoming frame, then
the frame gets dropped."
DEFVAL {524287}
::= { frPortServiceQueGrpEntry 5 }
portQBwInc OBJECT-TYPE
SYNTAX Integer32(0..16383)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Denotes the bandwidth increment for this
port queue. The bandwidth increment is the
percentage of the port bandwidth used by all
connections mapped to a particular queue scaled
by the value 16384."
::= { frPortServiceQueGrpEntry 6 }
portBytesDiscXceedQueFull OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter maintained for the no of bytes
discarded due to port queue depth exceeded."
::= { frPortServiceQueGrpEntry 7 }
portBytesDiscXceedDEThresh OBJECT-TYPE
SYNTAX Counter32
UNITS "Bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Counter maintained for the no of bytes
discarded due to DE threshold exceeded."
::= { frPortServiceQueGrpEntry 8 }
-- conformance information
ciscoWanFrPortMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrPortMIB 2 }
ciscoWanFrPortMIBGroups OBJECT IDENTIFIER ::=
{ ciscoWanFrPortMIBConformance 1 }
ciscoWanFrPortMIBCompliances OBJECT IDENTIFIER ::=
{ ciscoWanFrPortMIBConformance 2 }
-- compliance statements
ciscoWanFrPortCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for objects related
to Frame Relay Ports."
MODULE -- this module
MANDATORY-GROUPS {
ciscoWanFrPortConfGroup,
ciscoWanFrPortStateGroup,
ciscoWanFrPortStatsGroup
}
GROUP ciscoWanFrPortSvcGroup
DESCRIPTION
"This group is current for those frame relay
interfaces where SVC is supported."
GROUP ciscoWanFrPortDs0InDs1Group
DESCRIPTION
"This group is mandatory for those frame relay
interfaces where DS0 time slots are supported
in a DS1 interface."
GROUP ciscoWanFrPortsUsedGroup
DESCRIPTION
"This group is mandatory for those frame relay
interfaces where DS0 time slot information
is supported."
GROUP ciscoWanFrPortServiceQueueGroup
DESCRIPTION
"This group is mandatory for those frame relay
interfaces where Service Queue is supported."
::= { ciscoWanFrPortMIBCompliances 1 }
ciscoWanFrPortConfGroup OBJECT-GROUP
OBJECTS {
portNum,
portLineNum,
portRowStatus,
portDs0ConfigBitMap,
portDs0Speed,
portFlagsBetweenFrames,
portEqueueServiceRatio,
portSpeed,
portAdmin,
portType,
portBERTEnable,
portEnhancedSIW,
portM32EgrQueueThresh,
portHeaderLen,
portFrameChkSumType,
portFileId,
portOverSubEnable
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
Frame Relay Port information."
::= { ciscoWanFrPortMIBGroups 1 }
ciscoWanFrPortSvcGroup OBJECT-GROUP
OBJECTS {
portSvcStatus,
portSvcInUse,
portSvcShareLcn,
portSvcLcnLow,
portSvcLcnHigh,
portSvcDlciLow,
portSvcDlciHigh,
portDeleteSvcs,
portIngrSvcBandW,
portEgrSvcBandW
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent
SVC characteristics of a Frame Relay Port."
::= { ciscoWanFrPortMIBGroups 2 }
ciscoWanFrPortDs0InDs1Group OBJECT-GROUP
OBJECTS {
portsUsedLine1,
portsUsedLine2,
portsUsedLine3,
portsUsedLine4,
portsUsedLine5,
portsUsedLine6,
portsUsedLine7,
portsUsedLine8,
portNextAvailable
}
STATUS current
DESCRIPTION
"The objects representing the DS0(in DS1) that are
used by the frame relay logical ports."
::= { ciscoWanFrPortMIBGroups 3 }
ciscoWanFrPortStateGroup OBJECT-GROUP
OBJECTS {
statePortNum,
portState,
portSignallingState,
portOversubscribed,
portIngrPercentUtil,
portEgrPercentUtil
}
STATUS current
DESCRIPTION
"The collection of objects related to
state information of Frame Relay Ports."
::= { ciscoWanFrPortMIBGroups 4 }
ciscoWanFrPortStatsGroup OBJECT-GROUP
OBJECTS {
cntPortNum,
rcvPortFrames,
rcvPortBytes,
rcvPortFramesDE,
rcvPortFramesFECN,
rcvPortFramesBECN,
rcvFramesDiscCRCError,
rcvFramesDiscAlignmentError,
rcvFramesDiscIllegalLen,
rcvFramesDiscIllegalHeader,
rcvFramesAbort,
rcvFramesUnknownDLCI,
rcvLastUnknownDLCI,
rcvPortFramesTaggedFECN,
rcvPortFramesTaggedBECN,
rcvPortFramesTaggedDE,
rcvPortFramesDiscXceedDEThresh,
rcvPortKbpsAIR,
rcvBufNotAvailable,
xmtPortFrames,
xmtPortBytes,
xmtPortFramesFECN,
xmtPortFramesBECN,
xmtPortFramesDiscXceedQDepth,
xmtPortBytesDiscXceedQDepth,
xmtPortFramesDuringLMIAlarm,
xmtPortBytesDuringLMIAlarm,
xmtFramesAbort,
xmtFramesUnderrun,
xmtPortKbpsAIR,
xmtBufNotAvailable,
portClrButton,
rcvFramesDiscNoChan,
rcvFramesDiscOverrun,
rcvPortFramesDiscard,
xmtPortFramesDE,
xmtPortBytesDE,
rcvPortBytesDE,
xmtPortFramesDiscXceedDEThresh,
xmtPortBytesDiscXceedDEThresh,
rcvPortBytesDiscXceedDEThresh
}
STATUS current
DESCRIPTION
"The collection of objects related to
statistics information of frame relay ports."
::= { ciscoWanFrPortMIBGroups 5 }
ciscoWanFrPortServiceQueueGroup OBJECT-GROUP
OBJECTS {
frServPortNum,
portServiceQueueNo,
portEgresQDepth,
portEgresECNThresh,
portEgresDEThresh,
portQBwInc,
portBytesDiscXceedQueFull,
portBytesDiscXceedDEThresh
}
STATUS current
DESCRIPTION
"The collection of objects related to
service queue on frame relay ports."
::= { ciscoWanFrPortMIBGroups 6 }
ciscoWanFrPortsUsedGroup OBJECT-GROUP
OBJECTS {
frPortsUsedLineIndex,
frPortsUsedLine
}
STATUS current
DESCRIPTION
"The collection of objects related to information
on DS0 time slots used in each DS1 line."
::= { ciscoWanFrPortMIBGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink