mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-18 00:13:02 +00:00
753 lines
27 KiB
Plaintext
753 lines
27 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-RF-SUPPLEMENTAL-MIB.my
|
|
--
|
|
-- Created January 2001, Fred Frazer
|
|
--
|
|
-- Copyright (c) 2001, 2004 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-RF-SUPPLEMENTAL-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
NOTIFICATION-TYPE,
|
|
Counter32
|
|
FROM SNMPv2-SMI
|
|
MODULE-COMPLIANCE,
|
|
NOTIFICATION-GROUP,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
TEXTUAL-CONVENTION,
|
|
TruthValue,
|
|
DateAndTime
|
|
FROM SNMPv2-TC
|
|
ciscoMgmt
|
|
FROM CISCO-SMI
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
ConfigCopyState
|
|
FROM CISCO-CONFIG-COPY-MIB
|
|
PhysicalIndex
|
|
FROM ENTITY-MIB;
|
|
|
|
ciscoRfSupMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200405270000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems Customer Service
|
|
Postal: 170 West Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-rf-mib@cisco.com"
|
|
|
|
DESCRIPTION
|
|
"This MIB was designed to complement the CISCO-RF-MIB by
|
|
providing additional optional status and configuration control
|
|
for redundant CPU platforms.
|
|
|
|
However, the MIB should also be applicable to redundant
|
|
platforms which don't use the RF Redundancy Framework software
|
|
since it makes no direct references to any CISCO-RF-MIB objects
|
|
or textual conventions and no direct reference to any RF
|
|
states, RF events or internal information.
|
|
|
|
Glossary of terms used in this document:
|
|
|
|
Active - A redundant CPU which is actively controlling
|
|
the system.
|
|
|
|
Running configuration - The runtime configuration of a
|
|
system which reflects current configured
|
|
hardware or software settings. Runtime
|
|
configuration which is not stored in
|
|
non-volatile memory may be lost if the system
|
|
loses power.
|
|
|
|
Standby - A redundant CPU which is not currently
|
|
controlling the system, but which can take
|
|
over control if the Active CPU fails.
|
|
|
|
Startup configuration - A copy of system configuration
|
|
stored in non-volatile memory which can be
|
|
applied following a system powerup.
|
|
|
|
For platforms where all runtime configuration
|
|
is automatically stored in a non-volatile
|
|
manner, the running and startup configurations
|
|
are always identical.
|
|
|
|
Switchover - The transfer of control from one CPU to a
|
|
redundant CPU.
|
|
|
|
Sync - The mirroring (or synchronizing) of system
|
|
state, configuration, statistics or other
|
|
information from the Active CPU to a Standby
|
|
CPU to allow it to maintain full system control
|
|
following a switchover."
|
|
REVISION "200405270000Z"
|
|
DESCRIPTION
|
|
"Added the following scalar object to the cRfSupSystem
|
|
subgroup:
|
|
cRfSupSysIfCounterSync"
|
|
|
|
REVISION "200403040000Z"
|
|
DESCRIPTION
|
|
"Two notifications ciscoRfSupTimeChangeEvent and
|
|
ciscoRfSupTimeZoneChangeEvent have been added.
|
|
cRfSupNotificationsEnabled has been added to control
|
|
the above objects."
|
|
|
|
REVISION "200103160000Z"
|
|
DESCRIPTION
|
|
"The initial release of this MIB."
|
|
::= { ciscoMgmt 198 }
|
|
|
|
--
|
|
-- Textual conventions
|
|
--
|
|
RfSupSyncAdminState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value which indicates the administrative
|
|
state to allow user control of the syncing of database
|
|
information from an Active unit to the Standby unit(s)."
|
|
SYNTAX INTEGER {
|
|
enableAutoSync(1),
|
|
disableAutoSync(2)
|
|
}
|
|
|
|
RfSupSyncOperState ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An enumerated value which indicates the operational state
|
|
for the syncing of database information from an Active unit
|
|
to the Standby unit(s)."
|
|
SYNTAX INTEGER {
|
|
inSync(1),
|
|
lastUpdateFailed(2), -- last sync failed, reason unknown or
|
|
-- unspecified.
|
|
commDown(3), -- All communication down to Standby
|
|
syncDisabled(4), -- Disabled by user configuration
|
|
noStandbyPresent(5)
|
|
}
|
|
|
|
--
|
|
-- OBJECT IDENTIFIER assignments for various groups
|
|
--
|
|
ciscoRfSupMIBNotifs OBJECT IDENTIFIER ::= { ciscoRfSupMIB 0 }
|
|
ciscoRfSupMIBObjects OBJECT IDENTIFIER ::= { ciscoRfSupMIB 1 }
|
|
|
|
--
|
|
-- sub-groups
|
|
--
|
|
cRfSupSystem OBJECT IDENTIFIER ::= { ciscoRfSupMIBObjects 1 }
|
|
cRfSupCpu OBJECT IDENTIFIER ::= { ciscoRfSupMIBObjects 2 }
|
|
cRfSupAction OBJECT IDENTIFIER ::= { ciscoRfSupMIBObjects 3 }
|
|
|
|
--
|
|
-- The following "System" sub-group definitions are made up of
|
|
-- objects that monitor or control aspects of the combined redundant
|
|
-- system.
|
|
--
|
|
cRfSupSysAvailableStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this system began providing
|
|
uninterrupted operation. This includes the time while either
|
|
redundant unit was Active, but may also include brief intervals
|
|
during switchover where the new Active unit was operational,
|
|
but not yet reachable for network management purposes. It may
|
|
also include intervals where no Standby unit was offering
|
|
protection, as long as the Active unit was still operational.
|
|
|
|
It normally changes only if an unprotected system restart
|
|
occurs or if a Standby unit was forced to take over before
|
|
the initial database sync was completed.
|
|
|
|
However, it may also change if the system's Time of Day clock
|
|
is changed or adjusted. This object will be inaccurate if the
|
|
system's Time of Day clock has not been set accurately. However,
|
|
it should be implemented in such a way that when the system's
|
|
Time of Day clock is adjusted to an accurate setting,
|
|
cRfSupSysAvailableStartTime will also adjust to show the
|
|
accurate available start time."
|
|
::= { cRfSupSystem 1 }
|
|
|
|
cRfSupSysSwitchoverTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the last CPU switchover took place.
|
|
This object will remain uninstantiated if no switchovers have
|
|
taken place since the current Active CPU was initialized."
|
|
::= { cRfSupSystem 2 }
|
|
|
|
cRfSupSysSwitchovers OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number of times that switchovers have occurred since
|
|
cRfSupSysAvailableStartTime.
|
|
|
|
This object will remain uninstantiated if no switchovers have
|
|
taken place since the current Active CPU was initialized
|
|
or if a Standby unit was forced to take over before the
|
|
initial database sync was completed."
|
|
::= { cRfSupSystem 3 }
|
|
|
|
cRfSupSysRunningConfigSyncTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the running configuration was last
|
|
successfully synced from the current Active unit to the
|
|
Standby unit.
|
|
|
|
This object will remain uninstantiated if no sync has yet
|
|
taken place since the current Active CPU was initialized
|
|
or if a Standby unit was forced to take over before the
|
|
initial database sync was completed.
|
|
|
|
Since automatic running configuration syncs are event driven
|
|
and can be disabled by configuration, this time doesn't
|
|
directly indicate whether Standby software reflects the
|
|
running configuration of the Active unit.
|
|
|
|
Instead, see the cRfSupSysRunningConfigOper object to
|
|
determine whether Standby running configuration is in
|
|
sync with the Active CPU."
|
|
::= { cRfSupSystem 4 }
|
|
|
|
cRfSupSysRunningConfigAdmin OBJECT-TYPE
|
|
SYNTAX RfSupSyncAdminState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables automatic running configuration syncs only.
|
|
Doesn't affect other types of sync activity. If set to the
|
|
default value enableAutoSync, the Active unit will send the
|
|
full current running configuration following any operation
|
|
that changes the running configuration.
|
|
|
|
Setting disableAutoSync may be useful for some maintenance
|
|
and debugging operations."
|
|
::= { cRfSupSystem 5 }
|
|
|
|
cRfSupSysRunningConfigOper OBJECT-TYPE
|
|
SYNTAX RfSupSyncOperState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of running configuration syncs.
|
|
When the value inSync is returned, it indicates that the
|
|
Standby running configuration is being kept actively in sync
|
|
with the Active unit."
|
|
::= { cRfSupSystem 6 }
|
|
|
|
cRfSupSysStartupConfigSyncTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the startup configuration was last
|
|
successfully synced from the current Active unit to the
|
|
Standby unit(s).
|
|
|
|
This object will remain uninstantiated if no sync has yet
|
|
taken place since the current Active CPU was initialized
|
|
or if a Standby unit was forced to take over before the
|
|
initial database sync was completed.
|
|
|
|
For platforms where running configuration is always stored
|
|
in a non-volatile manner, this object should be identical
|
|
to cRfSupSysRunningConfigSyncTime.
|
|
|
|
Since automatic startup configuration syncs are event driven
|
|
and may be disabled by configuration, this time doesn't
|
|
directly reflect whether Standby startup configuration is
|
|
in sync with the Active unit.
|
|
|
|
Instead, see the cRfSupSysStartupConfigOper object to
|
|
determine whether Standby startup configuration is in sync
|
|
with the Active unit."
|
|
::= { cRfSupSystem 7 }
|
|
|
|
cRfSupSysStartupConfigAdmin OBJECT-TYPE
|
|
SYNTAX RfSupSyncAdminState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables automatic startup configuration syncs only.
|
|
Doesn't affect other types of sync activity. If set to the
|
|
default value enableAutoSync, the Active unit will send the
|
|
full current startup configuration to the Standby unit(s)
|
|
after any operation that changes the startup configuration
|
|
in non-volatile memory.
|
|
|
|
This object is not applicable to systems where running
|
|
configuration is always stored in non-volatile memory.
|
|
|
|
Setting disableAutoSync may be useful for some maintenance
|
|
and debugging operations."
|
|
::= { cRfSupSystem 8 }
|
|
|
|
cRfSupSysStartupConfigOper OBJECT-TYPE
|
|
SYNTAX RfSupSyncOperState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of startup configuration syncs.
|
|
When the value inSync is returned, it indicates that the
|
|
Standby startup configuration is being kept actively in sync
|
|
with the Active unit."
|
|
::= { cRfSupSystem 9 }
|
|
|
|
cRfSupSysBootImageSyncTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when the boot image memory was last
|
|
successfully synced from the current Active unit to the
|
|
Standby unit(s).
|
|
|
|
This object will remain uninstantiated if no sync has yet
|
|
taken place since the current Active CPU was initialized
|
|
or if a Standby unit was forced to take over before the
|
|
initial database sync was completed.
|
|
|
|
Since automatic boot image memory syncs are event driven
|
|
and may be disabled by configuration, this time doesn't
|
|
directly reflect whether Standby boot image memory is
|
|
in sync with the Active unit.
|
|
|
|
Instead, see the cRfSupSysBootImageOper object to determine
|
|
whether Standby boot image memory is in sync with the Active
|
|
unit."
|
|
::= { cRfSupSystem 10 }
|
|
|
|
cRfSupSysBootImageAdmin OBJECT-TYPE
|
|
SYNTAX RfSupSyncAdminState
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enables/Disables automatic boot image memory syncs only.
|
|
Doesn't affect other types of sync activity. If set to the
|
|
default value enableAutoSync, the Active unit will send the
|
|
full current boot image memory to the Standby unit(s) after
|
|
any operation that affects the boot image.
|
|
|
|
This object is not applicable for systems that don't
|
|
support automatic boot image memory mirroring.
|
|
|
|
Setting disableAutoSync is necessary during software upgrades
|
|
for the case where the boot image memory space is too small to
|
|
simultaneously hold both the old and new images."
|
|
::= { cRfSupSystem 11 }
|
|
|
|
cRfSupSysBootImageOper OBJECT-TYPE
|
|
SYNTAX RfSupSyncOperState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current operational state of boot image memory syncs.
|
|
When the value inSync is returned, it indicates that
|
|
Standby boot image memory is being actively mirrored from
|
|
the Active unit."
|
|
::= { cRfSupSystem 12 }
|
|
|
|
cRfSupSysStandbyBootFile OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Allow Standby unit(s) to automatically load a boot image
|
|
which differs from the image specified for the Active unit.
|
|
The string should be of the form <device>:<filename>.
|
|
Specifying a null value indicates that Standby unit(s) should
|
|
not use a different image than the Active unit.
|
|
|
|
This is used during software upgrade/downgrade procedures,
|
|
for platforms that support automatic syncs for boot image
|
|
memory."
|
|
::= { cRfSupSystem 13 }
|
|
|
|
cRfSupNotificationsEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This specifies whether ciscoRfSupTimeChangeEvent,
|
|
ciscoRfSupTimeZoneChangeEvent notifications shall be sent
|
|
when the system's clock or time zone is changed causing
|
|
a change in the values of cRfSupSysAvailableStartTime or
|
|
cRfSupSysSwitchoverTime objects.
|
|
|
|
Notifications will be sent only if this object is
|
|
set to 'true'."
|
|
DEFVAL { false }
|
|
::= { cRfSupSystem 14 }
|
|
|
|
cRfSupSysIfCounterSync OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the synchronization of Interface
|
|
Statistics information from Active CPU to the
|
|
Standby CPU.
|
|
When this object is set to 'true', synchronization is
|
|
enabled. When this object is set to 'false',
|
|
synchronization is disabled."
|
|
::= { cRfSupSystem 15 }
|
|
|
|
--
|
|
-- The following "Cpu" sub-group definitions are made up of
|
|
-- objects that monitor or control aspects of the individual
|
|
-- redundant units.
|
|
--
|
|
cRfSupCpuTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CRfSupCpuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table containing redundancy-related information for
|
|
individual CPU cards."
|
|
::= { cRfSupCpu 1 }
|
|
|
|
cRfSupCpuEntry OBJECT-TYPE
|
|
SYNTAX CRfSupCpuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information which can differ for each of the redundant
|
|
CPU units in the system."
|
|
INDEX { cRfSupCpuUniqueIndex }
|
|
::= { cRfSupCpuTable 1 }
|
|
|
|
CRfSupCpuEntry ::=
|
|
SEQUENCE {
|
|
cRfSupCpuUniqueIndex PhysicalIndex,
|
|
cRfSupCpuActiveSeverity INTEGER,
|
|
cRfSupCpuInitTime DateAndTime
|
|
}
|
|
|
|
cRfSupCpuUniqueIndex OBJECT-TYPE
|
|
SYNTAX PhysicalIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A table index which always has a unique platform-assigned
|
|
value for each physical redundant unit within a particular
|
|
system.
|
|
|
|
This index should refer to a particular physical unit
|
|
rather than a logically Active or Standby unit."
|
|
::= { cRfSupCpuEntry 1 }
|
|
|
|
cRfSupCpuActiveSeverity OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
nonFaulty(0),
|
|
nonTrafficAffectingFault(1),
|
|
partialTrafficAffectingFault(2),
|
|
fullyTrafficAffectingFault(3),
|
|
unknown(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The fault severity of a redundant unit, as calculated by
|
|
software. The value zero represents a good unit with no
|
|
detected faults. Higher values represent progressively more
|
|
serious faults. If it's not possible to determine any current
|
|
or prior severity information about a unit, the value unknown
|
|
should be returned.
|
|
|
|
Unlike some severity definitions, cRfSupCpuActiveSeverity
|
|
should not be downgraded when it switches from being Active.
|
|
The severity for a faulty Standby unit should correspond to
|
|
the system impact it would have if it were made to be the
|
|
Active unit, assuming the severity can be determined while
|
|
Standby.
|
|
|
|
The severity can be affected by either hardware or software
|
|
faults with the CPU itself. It can also be affected by faults
|
|
which prevent this CPU from interacting with one or more other
|
|
system components (such as linecards), even when the actual
|
|
faulty Field Replaceable Unit (FRU) is not the CPU itself.
|
|
|
|
As a minimum, the nonFaulty and fullyTrafficAffectingFault
|
|
values should be supported on any platform supporting this
|
|
object. Support of the other severity values is preferred,
|
|
but optional."
|
|
::= { cRfSupCpuEntry 2 }
|
|
|
|
cRfSupCpuInitTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The date and time when this redundant unit was last
|
|
initialized.
|
|
|
|
If the unit started out in the Standby state, this will also
|
|
include the time while running as Standby."
|
|
::= { cRfSupCpuEntry 3 }
|
|
|
|
--
|
|
-- The following "Action" sub-group definitions are made up of objects
|
|
-- that are associated with the execution of system actions.
|
|
--
|
|
cRfSupActionManualSync OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noAction(1),
|
|
runningConfig(2),
|
|
startupConfig(3),
|
|
bootImage(4)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is set to invoke a one-time manual copy of the
|
|
specified information type from the Active to one or more
|
|
Standby units.
|
|
|
|
When read, this object returns the last command written
|
|
or noAction if no action has been written to the Active unit
|
|
since it was initialized. The value noAction can not be used
|
|
in a write request.
|
|
|
|
The result of the last requested action can be determined
|
|
by reading the value of cRfSupActionLastSyncResult. The value
|
|
of the cRfSupActionManualSync object can not be changed until
|
|
the cRfSupActionLastSyncResult transitions to the successful
|
|
or failed state."
|
|
::= { cRfSupAction 1 }
|
|
|
|
cRfSupActionLastSyncResult OBJECT-TYPE
|
|
SYNTAX ConfigCopyState
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Contains the result of the last Manual Sync action request.
|
|
This object is instantiated only after the
|
|
cRfSupActionManualSync object has been set to a value other
|
|
than noAction."
|
|
::= { cRfSupAction 2 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
ciscoRfSupTimeChangeEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
cRfSupSysAvailableStartTime,
|
|
cRfSupSysSwitchoverTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent on the event of system clock
|
|
modification causing a change in the values of
|
|
cRfSupSysAvailableStartTime or cRfSupSysSwitchoverTime objects,
|
|
if cRfSupNotificationsEnabled object has value 'true'.
|
|
|
|
If the system clock change is a result of a time zone change
|
|
event,this notification will not be sent."
|
|
|
|
::= { ciscoRfSupMIBNotifs 1 }
|
|
|
|
ciscoRfSupTimeZoneChangeEvent NOTIFICATION-TYPE
|
|
OBJECTS {
|
|
cRfSupSysAvailableStartTime,
|
|
cRfSupSysSwitchoverTime}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is sent on the event of system time zone
|
|
modification causing a change in the values of
|
|
cRfSupSysAvailableStartTime or cRfSupSysSwitchoverTime objects,
|
|
if cRfSupNotificationsEnabled object has value 'true'."
|
|
::= { ciscoRfSupMIBNotifs 2 }
|
|
|
|
|
|
|
|
--
|
|
-- Conformance
|
|
--
|
|
ciscoRfSupMibConformance OBJECT IDENTIFIER
|
|
::= { ciscoRfSupMIB 2 }
|
|
ciscoRfSupMibCompliances OBJECT IDENTIFIER
|
|
::= { ciscoRfSupMibConformance 1 }
|
|
ciscoRfSupMibGroups OBJECT IDENTIFIER
|
|
::= { ciscoRfSupMibConformance 2 }
|
|
|
|
--
|
|
-- compliance statements
|
|
--
|
|
ciscoRfSupMibCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco RF SUPPLEMENTAL MIB.
|
|
|
|
Note: Platforms which implement the Cisco RF MIB are
|
|
not required to support the RF SUPPLEMENTAL MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoRfSupSysGroup,
|
|
ciscoRfSupActionGroup
|
|
}
|
|
-- Conditionally mandatory groups
|
|
GROUP ciscoRfSupCpuGroup
|
|
DESCRIPTION
|
|
"The ciscoRfSupCpuGroup is mandatory only for platforms
|
|
supporting the ENTITY-MIB."
|
|
|
|
::= { ciscoRfSupMibCompliances 1 }
|
|
|
|
ciscoRfSupMibComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco RF SUPPLEMENTAL MIB.
|
|
|
|
Note: Platforms which implement the Cisco RF MIB are
|
|
not required to support the RF SUPPLEMENTAL MIB. "
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoRfSupSysGroup,
|
|
ciscoRfSupActionGroup
|
|
}
|
|
|
|
-- Conditionally mandatory groups
|
|
GROUP ciscoRfSupCpuGroup
|
|
DESCRIPTION
|
|
"The ciscoRfSupCpuGroup is mandatory only for platforms
|
|
supporting the ENTITY-MIB."
|
|
GROUP ciscoRfSupSysOptionalGroup
|
|
DESCRIPTION
|
|
"The ciscoRfSupSysOptionalGroup is mandatory only for
|
|
systems supporting ciscoRfSupNotifGroup."
|
|
|
|
::= { ciscoRfSupMibCompliances 2 }
|
|
|
|
ciscoRfSupMibComplianceRev2 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which implement the
|
|
Cisco RF SUPPLEMENTAL MIB.
|
|
|
|
Note: Platforms which implement the Cisco RF MIB are
|
|
not required to support the RF SUPPLEMENTAL MIB. "
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS {
|
|
ciscoRfSupSysGroup,
|
|
ciscoRfSupActionGroup
|
|
}
|
|
|
|
-- Conditionally mandatory groups
|
|
GROUP ciscoRfSupCpuGroup
|
|
DESCRIPTION
|
|
"The ciscoRfSupCpuGroup is mandatory only for platforms
|
|
supporting the ENTITY-MIB."
|
|
GROUP ciscoRfSupSysOptionalGroup
|
|
DESCRIPTION
|
|
"The ciscoRfSupSysOptionalGroup is mandatory only for
|
|
systems supporting ciscoRfSupNotifGroup."
|
|
-- Optional groups
|
|
GROUP ciscoRfSupNotifGroup
|
|
DESCRIPTION
|
|
"This group is optional on platforms supporting the
|
|
CISCO-RF-SUPPLEMENTAL-MIB."
|
|
GROUP ciscoRfSupSysOptionalSyncGroup
|
|
DESCRIPTION
|
|
"This group is optional on platforms supporting the
|
|
the CISCO-RF-SUPPLEMENTAL-MIB."
|
|
|
|
::= { ciscoRfSupMibCompliances 3 }
|
|
|
|
|
|
--
|
|
-- Units of conformance
|
|
--
|
|
ciscoRfSupSysGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cRfSupSysAvailableStartTime,
|
|
cRfSupSysSwitchoverTime,
|
|
cRfSupSysSwitchovers,
|
|
cRfSupSysRunningConfigSyncTime,
|
|
cRfSupSysRunningConfigAdmin,
|
|
cRfSupSysRunningConfigOper,
|
|
cRfSupSysStartupConfigSyncTime,
|
|
cRfSupSysStartupConfigAdmin,
|
|
cRfSupSysStartupConfigOper,
|
|
cRfSupSysBootImageSyncTime,
|
|
cRfSupSysBootImageAdmin,
|
|
cRfSupSysBootImageOper,
|
|
cRfSupSysStandbyBootFile
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of RF SUPPLEMENTAL system-wide objects."
|
|
::= { ciscoRfSupMibGroups 1 }
|
|
|
|
ciscoRfSupCpuGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cRfSupCpuActiveSeverity,
|
|
cRfSupCpuInitTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of RF SUPPLEMENTAL per-CPU objects."
|
|
::= { ciscoRfSupMibGroups 2 }
|
|
|
|
ciscoRfSupActionGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cRfSupActionManualSync,
|
|
cRfSupActionLastSyncResult
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of RF SUPPLEMENTAL execution actions."
|
|
::= { ciscoRfSupMibGroups 3 }
|
|
|
|
ciscoRfSupSysOptionalGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cRfSupNotificationsEnabled
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of optional RF SUPPLEMENTAL system-wide
|
|
objects."
|
|
::= { ciscoRfSupMibGroups 4 }
|
|
|
|
ciscoRfSupNotifGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ciscoRfSupTimeChangeEvent,
|
|
ciscoRfSupTimeZoneChangeEvent
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of optional notifications issued on
|
|
system time/time zone modifications."
|
|
::= { ciscoRfSupMibGroups 5 }
|
|
|
|
ciscoRfSupSysOptionalSyncGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cRfSupSysIfCounterSync
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of optional RF SUPPLEMENTAL system wide
|
|
objects that control and monitor the synchronization of
|
|
information between the redundant system units."
|
|
::= { ciscoRfSupMibGroups 6 }
|
|
|
|
END
|