MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-PROXY-CONTROL-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

916 lines
31 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-PROXY-CONTROL-MIB.my: Proxy Control MIB file
--
-- November 1999 Chris White
--
-- Copyright (c) 1999, 2000-2005, 2006, 2009 by cisco Systems Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-PROXY-CONTROL-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
IpAddress,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION
FROM SNMPv2-TC
callActiveSetupTime,
callActiveIndex,
AbsoluteCounter32
FROM DIAL-CONTROL-MIB
CvcGUid
FROM CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
cCallHistoryIndex
FROM CISCO-DIAL-CONTROL-MIB
ciscoExperiment
FROM CISCO-SMI;
ciscoProxyControlMIB MODULE-IDENTITY
LAST-UPDATED "200902110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems, Inc.
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-voice@cisco.com"
DESCRIPTION
"This MIB module enhances the IETF Dial Control MIB
(RFC2128) by providing Proxy management information.
*** ABBREVIATIONS, ACRONYMS AND SYMBOLS ***
GSM - Global System for Mobile Communication
AMR-NB - Adaptive Multi Rate - Narrow Band
iLBC - internet Low Bitrate Codec
iSAC - internet Speech Audio Codec"
REVISION "200902110000Z"
DESCRIPTION
"[1] Added acronyms for iSAC codecs
[2] Added iSAC enum to CProxyAudioCodec textual convention.
[3] Added REFERENCE clause to CProxyAudioCodec textual
convention for iSAC codec."
REVISION "200603120000Z"
DESCRIPTION
"[1] Added acronyms for GSM AMR-NB and iLBC codecs
[2] Added iLBC enum to CProxyAudioCodec textual
convention.
[3] Added REFERENCE clause to CProxyAudioCodec textual
convention for GSM AMR-NB and iLBC codecs."
REVISION "200503060000Z"
DESCRIPTION
"Added gsmAmrNb enum to CProxyAudioCodec textual
convention."
REVISION "200002040000Z"
DESCRIPTION
"First release of this MIB."
::= { ciscoExperiment 57 }
-- Voice Proxy Dial Control MIB objects definitions
ciscoProxyControlMIBObjects OBJECT IDENTIFIER
::= { ciscoProxyControlMIB 1 }
-- The Proxy Control MIB consists of the following groups
-- [1] Proxy Control Call Active Group (cProxyCallActive)
-- [2] Proxy Control Call History Group (cProxyCallHistory)
cProxyCallActive OBJECT IDENTIFIER
::= { ciscoProxyControlMIBObjects 1 }
cProxyCallHistory OBJECT IDENTIFIER
::= { ciscoProxyControlMIBObjects 2 }
-- Textual Conventions
CProxyEndptType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A tag to identify the type of end point that the Proxy
is connected to."
SYNTAX INTEGER {
other(0), -- none of the following
proxy(1), -- another h323 proxy
gateway(2) -- h323 gateway
}
CProxyAudioCodec ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A tag to identify the type of encoding used to compress
the voice data of the call.
iLBC - iILBC 13330 or 15200 bps
iSAC - iSAC 10 to 32 kbps"
REFERENCE
"[1] RFC 3267: For introduction about GSM AMR-NB codec,
section 3.1
[2] RFC 3952: For introduction about iLBC codec,
section 2
[3] iSAC Codec Description Document from GIPS"
SYNTAX INTEGER {
other(0),
nonStandard(1),
g711Alawr64k(2),
g711Alawr56k(3),
g711Ulawr64k(4),
g711Ulawr56k(5),
g722r64k(6),
g722r56k(7),
g722r48k(8),
g7231(9),
g728(10),
g729(11),
g729AnnexA(12),
is11172(13),
is13818(14),
g729AnnexB(15),
g729AnnexAB(16),
g729AnnexC(17),
gsmFullRate(18),
gsmHalfRate(19),
gsmEnhancedFullRate(20),
gsmAmrNb(21),
iLBC(22),
iSAC(23)
}
CProxyVideoCodec ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A tag to identify the type of encoding used to compress
the video data of the call."
SYNTAX INTEGER {
other(0),
nonStandard(1),
h261(2),
h262(3),
h263(4),
is11172(5)
}
-- **********************************************************************
-- Proxy Dial Control Call Active Group
-- **********************************************************************
--
-- Proxy Call Active Table
cProxyCallActiveTable OBJECT-TYPE
SYNTAX SEQUENCE OF CProxyCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the Proxy extension to the call Active
table of IETF Dial Control MIB. It contains Proxy call
leg information about specific proxied calls."
REFERENCE "IETF Dial Control MIB (RFC2128)"
::= { cProxyCallActive 1 }
cProxyCallActiveEntry OBJECT-TYPE
SYNTAX CProxyCallActiveEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single proxied call leg.
An entry of this table is created when its associated call
Active entry in the IETF Dial Control MIB is created and
the call Active entry contains information for the call
establishment to the peer on the data network.
This entry is deleted when its associated Call Active
entry in the IETF Dial Control MIB is deleted."
INDEX {
callActiveSetupTime,
callActiveIndex
}
::= { cProxyCallActiveTable 1 }
CProxyCallActiveEntry ::= SEQUENCE {
cProxyCallActiveConnectionId CvcGUid,
cProxyCallActiveRemoteIPAddress IpAddress,
cProxyCallActiveAudioUDPPort INTEGER,
cProxyCallActiveVideoUDPPort INTEGER,
cProxyCallActiveT120TCPPort1 INTEGER,
cProxyCallActiveT120TCPPort2 INTEGER,
cProxyCallActiveT120TCPPort3 INTEGER,
cProxyCallActiveT120TCPPort4 INTEGER,
cProxyCallActiveEndpointType CProxyEndptType,
cProxyCallActiveEndpointVendor INTEGER,
cProxyCallActiveRequestBandwidth Integer32,
cProxyCallActiveActualBandwidth Integer32,
cProxyCallActiveAudioCoderRate CProxyAudioCodec,
cProxyCallActiveVideoCoderRate CProxyVideoCodec,
cProxyCallActiveRxAudioPackets AbsoluteCounter32,
cProxyCallActiveRxAudioBytes AbsoluteCounter32,
cProxyCallActiveTxAudioPackets AbsoluteCounter32,
cProxyCallActiveTxAudioBytes AbsoluteCounter32,
cProxyCallActiveRxVideoPackets AbsoluteCounter32,
cProxyCallActiveRxVideoBytes AbsoluteCounter32,
cProxyCallActiveTxVideoPackets AbsoluteCounter32,
cProxyCallActiveTxVideoBytes AbsoluteCounter32,
cProxyCallActiveRxT120Packets AbsoluteCounter32,
cProxyCallActiveRxT120Bytes AbsoluteCounter32,
cProxyCallActiveTxT120Packets AbsoluteCounter32,
cProxyCallActiveTxT120Bytes AbsoluteCounter32
}
cProxyCallActiveConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier for the Proxy call."
::= { cProxyCallActiveEntry 1 }
cProxyCallActiveRemoteIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system IP address for the call."
::= { cProxyCallActiveEntry 2 }
cProxyCallActiveAudioUDPPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener port to which to transmit
voice packets for the call. A value of zero indicates
that no port was used."
::= { cProxyCallActiveEntry 3 }
cProxyCallActiveVideoUDPPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener port to which to transmit
video packets for the call. A value of zero indicates
that no port was used."
::= { cProxyCallActiveEntry 4 }
cProxyCallActiveT120TCPPort1 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First remote system UDP listener port to which to transmit
T120 packets for the call. A value of zero indicates that
no port was used."
::= { cProxyCallActiveEntry 5 }
cProxyCallActiveT120TCPPort2 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used."
::= { cProxyCallActiveEntry 6 }
cProxyCallActiveT120TCPPort3 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Third remote system UDP listener port to which to transmit
T120 packets for the call. A value of zero indicates that
no port was used."
::= { cProxyCallActiveEntry 7 }
cProxyCallActiveT120TCPPort4 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fourth remote system UDP listener port to which to transmit
T120 packets for the call. A value of zero indicates that
no port was used."
::= { cProxyCallActiveEntry 8 }
cProxyCallActiveEndpointType OBJECT-TYPE
SYNTAX CProxyEndptType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of end point this proxy call leg is connected to."
::= { cProxyCallActiveEntry 9 }
cProxyCallActiveEndpointVendor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The H225 Manufacturers code for this endpoint.
Zero indicates unknown vendor."
::= { cProxyCallActiveEntry 10 }
cProxyCallActiveRequestBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The requested bandwidth for this proxied call leg."
::= { cProxyCallActiveEntry 11 }
cProxyCallActiveActualBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual bandwidth used by the proxied call."
::= { cProxyCallActiveEntry 12 }
cProxyCallActiveAudioCoderRate OBJECT-TYPE
SYNTAX CProxyAudioCodec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit
rate of audio compression to its associated call leg
for the call."
::= { cProxyCallActiveEntry 13 }
cProxyCallActiveVideoCoderRate OBJECT-TYPE
SYNTAX CProxyVideoCodec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit
rate of video compression to its associated call leg
for the call."
::= { cProxyCallActiveEntry 14 }
cProxyCallActiveRxAudioPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio packets received from the remote
end for this call."
::= { cProxyCallActiveEntry 15 }
cProxyCallActiveRxAudioBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio bytes received from the remote
end for this call."
::= { cProxyCallActiveEntry 16 }
cProxyCallActiveTxAudioPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio packets transmitted to the remote
end for this call."
::= { cProxyCallActiveEntry 17 }
cProxyCallActiveTxAudioBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio bytes transmitted to the remote
end for this call."
::= { cProxyCallActiveEntry 18 }
cProxyCallActiveRxVideoPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video packets received from the remote
end for this call."
::= { cProxyCallActiveEntry 19 }
cProxyCallActiveRxVideoBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video bytes received from the remote
end for this call."
::= { cProxyCallActiveEntry 20 }
cProxyCallActiveTxVideoPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video packets transmitted to the remote
end for this call."
::= { cProxyCallActiveEntry 21 }
cProxyCallActiveTxVideoBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video bytes transmitted to the remote
end for this call."
::= { cProxyCallActiveEntry 22 }
cProxyCallActiveRxT120Packets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data packets received from the
remote end for this call."
::= { cProxyCallActiveEntry 23 }
cProxyCallActiveRxT120Bytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data bytes received from the remote
end of this call."
::= { cProxyCallActiveEntry 24 }
cProxyCallActiveTxT120Packets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data packets transmitted to the remote
end for this call."
::= { cProxyCallActiveEntry 25 }
cProxyCallActiveTxT120Bytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data bytes transmitted to the remote
end of this call."
::= { cProxyCallActiveEntry 26 }
-- **********************************************************************
-- Proxy Dial Control Call History Group
-- **********************************************************************
--
-- Proxy Call History Table
cProxyCallHistoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CProxyCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is the Proxy extension to the History call table
of IETF Dial Control MIB. It contains PROXY call leg
information about proxied call."
REFERENCE "IETF Dial Control MIB (RFC2128)"
::= { cProxyCallHistory 1 }
cProxyCallHistoryEntry OBJECT-TYPE
SYNTAX CProxyCallHistoryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The information regarding a single proxied call leg.
An entry of this table is created when its associated call
History entry in the IETF Dial Control MIB is created. The
call History entry contains information for the call
establishment to the peer on the data network backbone via
a voice over PROXY peer.
The entry is deleted when its associated call History entry
in the IETF Dial Control MIB is deleted."
INDEX { cCallHistoryIndex }
::= { cProxyCallHistoryTable 1 }
CProxyCallHistoryEntry ::= SEQUENCE {
cProxyCallHistoryConnectionId CvcGUid,
cProxyCallHistoryRemoteIPAddress IpAddress,
cProxyCallHistoryAudioUDPPort INTEGER,
cProxyCallHistoryVideoUDPPort INTEGER,
cProxyCallHistoryT120TCPPort1 INTEGER,
cProxyCallHistoryT120TCPPort2 INTEGER,
cProxyCallHistoryT120TCPPort3 INTEGER,
cProxyCallHistoryT120TCPPort4 INTEGER,
cProxyCallHistoryEndpointType CProxyEndptType,
cProxyCallHistoryEndpointVendor INTEGER,
cProxyCallHistoryRequestBandwidth Integer32,
cProxyCallHistoryActualBandwidth Integer32,
cProxyCallHistoryAudioCoderRate CProxyAudioCodec,
cProxyCallHistoryVideoCoderRate CProxyVideoCodec,
cProxyCallHistoryRxAudioPackets AbsoluteCounter32,
cProxyCallHistoryRxAudioBytes AbsoluteCounter32,
cProxyCallHistoryTxAudioPackets AbsoluteCounter32,
cProxyCallHistoryTxAudioBytes AbsoluteCounter32,
cProxyCallHistoryRxVideoPackets AbsoluteCounter32,
cProxyCallHistoryRxVideoBytes AbsoluteCounter32,
cProxyCallHistoryTxVideoPackets AbsoluteCounter32,
cProxyCallHistoryTxVideoBytes AbsoluteCounter32,
cProxyCallHistoryRxT120Packets AbsoluteCounter32,
cProxyCallHistoryRxT120Bytes AbsoluteCounter32,
cProxyCallHistoryTxT120Packets AbsoluteCounter32,
cProxyCallHistoryTxT120Bytes AbsoluteCounter32
}
cProxyCallHistoryConnectionId OBJECT-TYPE
SYNTAX CvcGUid
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The global call identifier for the Proxy call."
::= { cProxyCallHistoryEntry 1 }
cProxyCallHistoryRemoteIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system IP address for the call."
::= { cProxyCallHistoryEntry 2 }
cProxyCallHistoryAudioUDPPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener port to which to transmit
voice packets for the call. A value of zero indicates
that no port was used."
::= { cProxyCallHistoryEntry 3 }
cProxyCallHistoryVideoUDPPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote system UDP listener port to which to transmit
video packets for the call. A value of zero indicates
that no port was used."
::= { cProxyCallHistoryEntry 4 }
cProxyCallHistoryT120TCPPort1 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"First remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used."
::= { cProxyCallHistoryEntry 5 }
cProxyCallHistoryT120TCPPort2 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Second remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used."
::= { cProxyCallHistoryEntry 6 }
cProxyCallHistoryT120TCPPort3 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Third remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used."
::= { cProxyCallHistoryEntry 7 }
cProxyCallHistoryT120TCPPort4 OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Fourth remote system UDP listener port to which to
transmit T120 packets for the call. A value of zero
indicates that no port was used."
::= { cProxyCallHistoryEntry 8 }
cProxyCallHistoryEndpointType OBJECT-TYPE
SYNTAX CProxyEndptType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of end point this proxy call leg is connected to."
::= { cProxyCallHistoryEntry 9 }
cProxyCallHistoryEndpointVendor OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The H225 Manufacturers code for this endpoint.
Zero indicates unknown vendor."
::= { cProxyCallHistoryEntry 10 }
cProxyCallHistoryRequestBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The requested bandwidth for this proxied call leg."
::= { cProxyCallHistoryEntry 11 }
cProxyCallHistoryActualBandwidth OBJECT-TYPE
SYNTAX Integer32 (0..10000000)
UNITS "kilobits per second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual bandwidth used by the proxied call."
::= { cProxyCallHistoryEntry 12 }
cProxyCallHistoryAudioCoderRate OBJECT-TYPE
SYNTAX CProxyAudioCodec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit
rate of audio compression to its associated call leg
for the call."
::= { cProxyCallHistoryEntry 13 }
cProxyCallHistoryVideoCoderRate OBJECT-TYPE
SYNTAX CProxyVideoCodec
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The negotiated coder rate. It specifies the transmit
rate of video compression to its associated call leg
for the call."
::= { cProxyCallHistoryEntry 14 }
cProxyCallHistoryRxAudioPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio packets received from the remote
end for this call."
::= { cProxyCallHistoryEntry 15 }
cProxyCallHistoryRxAudioBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio bytes received from the remote
end for this call."
::= { cProxyCallHistoryEntry 16 }
cProxyCallHistoryTxAudioPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio packets transmitted to the remote
end for this call."
::= { cProxyCallHistoryEntry 17 }
cProxyCallHistoryTxAudioBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of audio bytes transmitted to the remote
end for this call."
::= { cProxyCallHistoryEntry 18 }
cProxyCallHistoryRxVideoPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video packets received from the remote
end for this call."
::= { cProxyCallHistoryEntry 19 }
cProxyCallHistoryRxVideoBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video bytes received from the remote
end for this call."
::= { cProxyCallHistoryEntry 20 }
cProxyCallHistoryTxVideoPackets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video packets transmitted to the remote
end for this call."
::= { cProxyCallHistoryEntry 21 }
cProxyCallHistoryTxVideoBytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of video bytes transmitted to the remote end for
this call."
::= { cProxyCallHistoryEntry 22 }
cProxyCallHistoryRxT120Packets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data packets received from the remote
end for this call."
::= { cProxyCallHistoryEntry 23 }
cProxyCallHistoryRxT120Bytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data bytes received from the remote
end for this call."
::= { cProxyCallHistoryEntry 24 }
cProxyCallHistoryTxT120Packets OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data packets transmitted to the remote
end for this call."
::= { cProxyCallHistoryEntry 25 }
cProxyCallHistoryTxT120Bytes OBJECT-TYPE
SYNTAX AbsoluteCounter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of T120 data bytes transmitted to the remote
end for this call."
::= { cProxyCallHistoryEntry 26 }
-- Notifications
ciscoProxyControlMIBNotificationPrefix OBJECT IDENTIFIER
::= { ciscoProxyControlMIB 2 }
ciscoProxyControlMIBNotifications OBJECT IDENTIFIER
::= { ciscoProxyControlMIBNotificationPrefix 0 }
-- Conformancy, Compliance and Group Objects
ciscoProxyControlMIBConformance OBJECT IDENTIFIER
::= { ciscoProxyControlMIB 3 }
ciscoProxyControlMIBCompliances OBJECT IDENTIFIER
::= { ciscoProxyControlMIBConformance 1 }
ciscoProxyControlMIBGroups OBJECT IDENTIFIER
::= { ciscoProxyControlMIBConformance 2 }
-- compliance statements
ciscoProxyControlMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the CISCO PROXY CONTROL MIB"
MODULE -- this module
MANDATORY-GROUPS {
cProxyCallActiveGroup,
cProxyCallHistoryGroup
}
::= { ciscoProxyControlMIBCompliances 1 }
-- units of conformance
cProxyCallActiveGroup OBJECT-GROUP
OBJECTS {
cProxyCallActiveConnectionId,
cProxyCallActiveRemoteIPAddress,
cProxyCallActiveAudioUDPPort,
cProxyCallActiveVideoUDPPort,
cProxyCallActiveT120TCPPort1,
cProxyCallActiveT120TCPPort2,
cProxyCallActiveT120TCPPort3,
cProxyCallActiveT120TCPPort4,
cProxyCallActiveEndpointType,
cProxyCallActiveEndpointVendor,
cProxyCallActiveRequestBandwidth,
cProxyCallActiveActualBandwidth,
cProxyCallActiveAudioCoderRate,
cProxyCallActiveVideoCoderRate,
cProxyCallActiveRxAudioPackets,
cProxyCallActiveRxAudioBytes,
cProxyCallActiveTxAudioPackets,
cProxyCallActiveTxAudioBytes,
cProxyCallActiveRxVideoPackets,
cProxyCallActiveRxVideoBytes,
cProxyCallActiveTxVideoPackets,
cProxyCallActiveTxVideoBytes,
cProxyCallActiveRxT120Packets,
cProxyCallActiveRxT120Bytes,
cProxyCallActiveTxT120Packets,
cProxyCallActiveTxT120Bytes
}
STATUS current
DESCRIPTION
"A collection of objects providing the PROXY Call Active
entry capability."
::= { ciscoProxyControlMIBGroups 1 }
cProxyCallHistoryGroup OBJECT-GROUP
OBJECTS {
cProxyCallHistoryConnectionId,
cProxyCallHistoryRemoteIPAddress,
cProxyCallHistoryAudioUDPPort,
cProxyCallHistoryVideoUDPPort,
cProxyCallHistoryT120TCPPort1,
cProxyCallHistoryT120TCPPort2,
cProxyCallHistoryT120TCPPort3,
cProxyCallHistoryT120TCPPort4,
cProxyCallHistoryEndpointType,
cProxyCallHistoryEndpointVendor,
cProxyCallHistoryRequestBandwidth,
cProxyCallHistoryActualBandwidth,
cProxyCallHistoryAudioCoderRate,
cProxyCallHistoryVideoCoderRate,
cProxyCallHistoryRxAudioPackets,
cProxyCallHistoryRxAudioBytes,
cProxyCallHistoryTxAudioPackets,
cProxyCallHistoryTxAudioBytes,
cProxyCallHistoryRxVideoPackets,
cProxyCallHistoryRxVideoBytes,
cProxyCallHistoryTxVideoPackets,
cProxyCallHistoryTxVideoBytes,
cProxyCallHistoryRxT120Packets,
cProxyCallHistoryRxT120Bytes,
cProxyCallHistoryTxT120Packets,
cProxyCallHistoryTxT120Bytes
}
STATUS current
DESCRIPTION
"A collection of objects providing the PROXY Call Active
entry capability."
::= { ciscoProxyControlMIBGroups 2 }
END
Reference in New Issue View Git Blame Copy Permalink