MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-IPSLA-ETHERNET-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2492 lines
93 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-IPSLA-ETHERNET-MIB.my: IP SLA Ethernet MIB file
--
-- February 2006, Minghui Zhu
--
-- Copyright (c) 2006 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-IPSLA-ETHERNET-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32,
Unsigned32,
TimeTicks
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TimeStamp,
StorageType,
RowStatus
FROM SNMPv2-TC
VlanId
FROM Q-BRIDGE-MIB
Dot1agCfmMaintDomainNameType,
Dot1agCfmMaintDomainName
FROM IEEE8021-CFM-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
Layer2Cos
FROM CISCO-TC
rttMonCtrlAdminIndex
FROM CISCO-RTTMON-MIB
RttResponseSense,
RttMonRttType,
RttMonReactVar,
RttMonCtrlIndex,
RttMonIdLst
FROM CISCO-RTTMON-TC-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoIpSlaEthernetMIB MODULE-IDENTITY
LAST-UPDATED "200602080000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems, Inc.
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553 NETS
Email: cs-ipsla@cisco.com"
DESCRIPTION
"This MIB module consists of two parts.
1) Auto-Ethernet-CFM Control:
|-- ipslaEthernetGrpCtrlTable
|-- ipslaEthernetGrpReactTable
2) ethernetJitter Stats:
|-- ipslaEtherJitterLatestStatsTable
|-- ipslaEtherJitterAggStatsTable
The first part defines a mechanism to manage IP SLA
Auto-Ethernet-CFM operation.
IP SLA is a capability which utilizes active monitoring for
network perfomance. It can be used for network
troubleshooting, network assessment and health monitoring.
IEEE 802.1ag defines Connection Fault Management (CFM) for
Ethernet layer. CFM can be used to detect, isolate and report
the connectivity faults, and allows discovery and verification
of the path through briges and LANs.
Auto-Ethernet-CFM operation integrates the capabilities of
IP SLA and IEEE 802.1ag. It's capable of discovering all the
existing MEPs in a specified VLAN within a specified
maintenance domain. After which, it creates, configures, and
schedules an IP SLA operation for each MEP automatically.
IP SLA currently supports two types of operations for
end-to-end Ethernet connectivity - 'ethernetPing' and
'ethernetJitter'.
'ethernetPing' can be used to monitor the connectivity and
measure RTT by sending the regular 802.1ag loopback frame
to a particular MEP.
'ethernetJitter' can be used to measure metrics such as
RTT, Jitter, frame loss, one-way latency by sending multiple
enhanced CFM frames at specified interval to a particular MEP.
Without Auto-Ethernet-CFM operation, the two types of operations
can also be created, configured, and scheduled manually through
CISCO-RTTMON-MIB by specifing the target MEP's identifier
in addition to the VLAN and Maitenance Domain.
With Auto-Ethernet-CFM operation, the two types of operations
will be created automatically. The Auto-Ethernet-CFM will pass
all the values specified in this module to the corresponding
objects in CISCO-RTTMON-MIB for each MEP discovered.
CISCO-IPSLA-ETHERNET-MIB CISCO-RTTMON-MIB
ipslaEthernetGrpCtrlTable -> rttMonCtrlAdminTable
|
-> rttMonEchoAdminTable
ipslaEthernetGrpReactTable -> rttMonReactTable
The second part defines a collection of statistics resulting
from 'ethernetJitter' operation created either manually or
automatically.
Glossary:
CFM - Connection Fault Management
DSAP - Domain Service Access Point: A member of a set of
SAPs at which a Maintenance Domain is capable of
offering connectivity to systems outside the Maintenance
Domain.
IP SLA - Cisco IOS IP Service Level Agreements
IP SLA operation - Refers to the 'ethernetPing' or
'ethernetJitter' operation supported by IP SLA.
MEP - Maintenance association End Point: An actively managed
CFM entity, associated with a specific DSAP of a
service instance, which can generate and receive CFM
PDUs and track any responses.
maintenance domain - The network or the part of the network
for which faults in connectivity are to be managed.
The boundary of a Maintenance Domain is defined by a set
of DSAPs, each of which can become a point of connectivity
to a service instance.
Maintenance Domain Name - The identifier, unique over the
domain for which CFM is to protect against accidental
concatenation of service instances, of a particular
Maintenance Domain.
RTT - Round Trip Time
SAP - Service Access Point at which a service is offered.
service instance - A service instance is a set of SAPs,
selected from among the DSAPs defining a Maintenance
Domain, such that a Data.Request primitive presented
to one SAP can result in a Data.Indication primitive
occurring at one or more of the other SAPs in the set.
It corresponds to a VLAN.
TLV - Stands for Type, Length, Value, and denotes a method of
encoding variable-length and/or optional information in a
PDU. TLVs are not aligned to any particular word or octet
boundary. TLVs follow each other with no padding between
TLVs.
VLAN - Virtual Local Area Network: A subset of the active
topology of a Bridged Local Area Network. Associated
with each VLAN is a VLAN Identifier.
REFERENCE:
IEEE 802.1ag Draft 6.0 'Virtual Briged Local Area Networks
- Amendments 5: Connectivity Fault Management' July 2006
"
REVISION "200602080000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 585 }
ciscoIpSlaEthernetMIBNotifs OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIB 0 }
ciscoIpSlaEthernetMIBObjects OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIB 1 }
ipslaEthernetGrpCtrl OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIBObjects 1 }
ipslaEthernetStats OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIBObjects 2 }
ipslaEthernetLatestOper OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIBObjects 3 }
ipslaEthernetGrpCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaEthernetGrpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Auto-Ethernet-CFM control data. When a
row transition to the 'active' state, the IP SLA agent will
discover all the MEPs inside the specified VLAN and maintenance
domain and create IP SLA ethernet operations based on the
value of ipslaEthernetGrpCtrlRttType for each MEP.
All the values in this table will be passed to the corresponding
objects in the rttMonCtrlAdminTable and rttMonEchoAdminTable of
CISCO-RTTMON-MIB so that each IP SLA Ethernet operation will
have the same configuration as specified for Auto-Ethernet-CFM.
- Objects in this table - Corresponding objects in
rttMonCtrlAdminTable
ipslaEthernetGrpCtrlStatus rttMonCtrlAdminStatus
ipslaEthernetGrpCtrlRttType rttMonCtrlAdminRttType
ipslaEthernetGrpCtrlOwner rttMonCtrlAdminOwner
ipslaEthernetGrpCtrlTag rttMonCtrlAdminTag
ipslaEthernetGrpCtrlThreshold rttMonCtrlAdminThreshold
ipslaEthernetGrpCtrlTimeout rttMonCtrlAdminTimeout
- Objects in this table - Corresponding objects in
rttMonEchoAdminTable
ipslaEthernetGrpCtrlVLAN rttMonEchoAdminTargetVLAN
ipslaEthernetGrpCtrlDomainName rttMonEchoAdminTargetDomainName
ipslaEthernetGrpCtrlReqDataSize rttMonEchoAdminPktDataRequestSize
ipslaEthernetGrpCtrlCOS rttMonEchoAdminEthernetCOS
ipslaEthernetGrpCtrlInterval rttMonEchoAdminInterval
ipslaEthernetGrpCtrlNumFrames rttMonEchoAdminNumPackets"
::= { ipslaEthernetGrpCtrl 1 }
ipslaEthernetGrpCtrlEntry OBJECT-TYPE
SYNTAX IpslaEthernetGrpCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of objects that define a conceptual
Auto-Ethernet-CFM control row.
The following objects must be specified in order to create this
conceptual row.
- ipslaEthernetGrpCtrlStatus
- ipslaEthernetGrpCtrlRttType
The following objects must be specified in order to activate this
conceptual row.
- ipslaEthernetGrpCtrlVLAN
- ipslaEthernetGrpCtrlDomainName
- ipslaEthernetGrpSchedulePeriod
- ipslaEthernetGrpScheduleRttStartTime
This conceptual row can be delete at any time by set the
ipslaEthernetGrpCtrlStatus to 'destroy'. When this row is
deleted, All the IP SLA operations created by this row will
be destroyed."
INDEX { ipslaEthernetGrpCtrlIndex }
::= { ipslaEthernetGrpCtrlTable 1 }
IpslaEthernetGrpCtrlEntry ::= SEQUENCE {
ipslaEthernetGrpCtrlIndex RttMonCtrlIndex,
ipslaEthernetGrpCtrlStatus RowStatus,
ipslaEthernetGrpCtrlStorageType StorageType,
ipslaEthernetGrpCtrlRttType RttMonRttType,
ipslaEthernetGrpCtrlOwner SnmpAdminString,
ipslaEthernetGrpCtrlTag SnmpAdminString,
ipslaEthernetGrpCtrlThreshold Unsigned32,
ipslaEthernetGrpCtrlTimeout Unsigned32,
ipslaEthernetGrpCtrlProbeList RttMonIdLst,
ipslaEthernetGrpCtrlVLAN VlanId,
ipslaEthernetGrpCtrlDomainNameType Dot1agCfmMaintDomainNameType,
ipslaEthernetGrpCtrlDomainName Dot1agCfmMaintDomainName,
ipslaEthernetGrpCtrlReqDataSize Unsigned32,
ipslaEthernetGrpCtrlMPIDExLst RttMonIdLst,
ipslaEthernetGrpCtrlCOS Layer2Cos,
ipslaEthernetGrpCtrlInterval Unsigned32,
ipslaEthernetGrpCtrlNumFrames Unsigned32,
ipslaEthernetGrpScheduleRttStartTime TimeTicks,
ipslaEthernetGrpSchedulePeriod Unsigned32,
ipslaEthernetGrpScheduleFrequency Unsigned32
}
ipslaEthernetGrpCtrlIndex OBJECT-TYPE
SYNTAX RttMonCtrlIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates a row in the ipslaEthernetGrpCtrlTable.
This value is a pseudo-random number selected by the management
station when creating a row via the
ipslaEthernetGrpCtrlStatus object.
For easy management, user can select range of numbers for
different maintenance domain.
For instance, the ipslaEthernetGrpCtrlIndex 1-100 will be
used for Domain_A, 101-200 will be used for Domain_B.
If the pseudo-random number is already in use an
'inconsistentValue' return code will be returned when set
operation is attempted."
::= { ipslaEthernetGrpCtrlEntry 1 }
ipslaEthernetGrpCtrlStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the status of Auto-Ethernet-CFM
control row.
Following objects must be specified in order for this object to
become active.
- ipslaEthernetGrpCtrlRttType
- ipslaEthernetGrpCtrlVLAN
- ipslaEthernetGrpCtrlDomainName
- ipslaEthernetGrpSchedulePeriod
- ipslaEthernetGrpScheduleRttStartTime
All other objects can assume default values.
The following objects cannot be modified after creating the
Auto-Ethernet-CFM conceptual row.
- ipslaEthernetGrpCtrlRttType
- ipslaEthernetGrpCtrlVLAN
- ipslaEthernetGrpCtrlDomainName
The following objects can be modified even after creating the
Auto-Ethernet-CFM conceptual row by setting this object to
'notInService'
- All other writable objects in ipslaEthernetGrpCtrlTable except
ipslaEthernetGrpCtrlRttType, ipslaEthernetGrpCtrlVLAN
and ipslaEthernetGrpCtrlDomainName.
- Objects in the ipslaEthernetGrpScheduleTable.
The following objects can be modified as needed without setting
this object to 'notInService' even after creating the
Auto-Ethernet-CFM conceptual row.
- Objects in ipslaEthernetGrpReactTable.
This object can be set to 'destroy' from any value at any
time. When this object is set to 'destroy' it will stop and
destroy all the IP SLA operations created by this
Auto-Ethernet-CFM before destroying Auto-Ethernet-CFM
control row."
::= { ipslaEthernetGrpCtrlEntry 2 }
ipslaEthernetGrpCtrlStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { ipslaEthernetGrpCtrlEntry 3 }
ipslaEthernetGrpCtrlRttType OBJECT-TYPE
SYNTAX RttMonRttType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of IP SLA operation to be created by this
Auto-Ethernet-CFM.
This value can only be set to type 'ethernetPing' and
'ethernetJitter'.
'ethernetPing' operation sends the regular 802.1ag loopback
frame to the target MEP to monitor the connectivity and perform
delay analysis.
'ethernetJitter'sends multiple enhanced CFM frames at a
specified interval to the target MEP to measure metrics such as
RTT, jitter, frame loss, one-way latency and so on.
This value must be set before setting any other
parameter configuration of an Auto-Ethernet-CFM."
::= { ipslaEthernetGrpCtrlEntry 4 }
ipslaEthernetGrpCtrlOwner OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which used by a managing application to identify
the entity that created this Auto-Ethernet-CFM."
DEFVAL { "" }
::= { ipslaEthernetGrpCtrlEntry 5 }
ipslaEthernetGrpCtrlTag OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which used by a managing application to identify
the target VLAN and maintenance domain of this
Auto-Ethernet-CFM."
DEFVAL { "" }
::= { ipslaEthernetGrpCtrlEntry 6 }
ipslaEthernetGrpCtrlThreshold OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647 )
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the threshold value of a particular
object.
This value will be examined for each IP SLA operations
created by the Auto-Ethernet-CFM.
For 'ethernetPing', if the value of
rttMonLatestRttOperCompletionTime is greater than this
value, the 'overThreshold' will be reported through
rttMonLatestRttOperSense defined in CISCO-RTTMON-MIB.
For 'ethernetJitter', if the value of
ipslaEtherJitterLatestAvgJitter value is greater than this
value, the 'overThreshold' will be reported through
ipslaEtherJitterLatestSense defined this module.
"
DEFVAL { 5000 }
::= { ipslaEthernetGrpCtrlEntry 7 }
ipslaEthernetGrpCtrlTimeout OBJECT-TYPE
SYNTAX Unsigned32 (0..604800000 )
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration to wait for an IP SLA operation
created by this Auto-Ethernet-CFM to complete.
For 'ethernetPing', if the value of
rttMonLatestRttOperCompletionTime is greater than this
value, the 'timeout' will be reported through
rttMonLatestRttOperSense defined in CISCO-RTTMON-MIB.
For 'ethernetJitter', if all the frames sent to target MEP
have not been recievied within this duration, the 'timeout'
will be reported through ipslaEtherJitterLatestSense
defined this module.
The value of this object cannot be set to a value which would
specify a duration exceeding ipslaEthernetGrpScheduleFrequency."
DEFVAL { 5000 }
::= { ipslaEthernetGrpCtrlEntry 8 }
ipslaEthernetGrpCtrlProbeList OBJECT-TYPE
SYNTAX RttMonIdLst
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the identifiers of the IP SLA
operations that are created by the Auto-Ethernet-CFM.
The identifier will be stored in rttMonCtrlAdminIndex defined
in CISCO-RTTMON-MIB for each IP SLA operation."
::= { ipslaEthernetGrpCtrlEntry 9 }
ipslaEthernetGrpCtrlVLAN OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the identifier of VLAN for which
the Auto-Ethernet-CFM operation will be used.
It is an unique identifier for a service instance within
a Maintenance Domain specified by ipslaEthernetGrpCtrlDomainName.
The Auto-Ethernet-CFM will find all the MEPs participating
in this VLAN and create IP SLA operations for each MEP
corresponding to value specified in ipslaEthernetGrpCtrlRttType."
::= { ipslaEthernetGrpCtrlEntry 10 }
ipslaEthernetGrpCtrlDomainNameType OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainNameType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of maintenance domain name
to be used by the Auto-Ethernet-CFM operation.
This object can only be set to the following values:
'none'(1)
'charString'(4)
Other values are not supported.
Value 'none' means that the ipslaEthernetGrpCtrlDomainName
has not been specified."
DEFVAL { none }
::= { ipslaEthernetGrpCtrlEntry 11 }
ipslaEthernetGrpCtrlDomainName OBJECT-TYPE
SYNTAX Dot1agCfmMaintDomainName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the maintenance domain name
to be used by the Auto-Ethernet-CFM operation.
The Auto-Ethernet-CFM operation discovers all the MEPs
participating in the VLAN specified by ipslaEthernetGrpCtrlVLAN
within this maintenance domain and create IP SLA operations
for each MEP corresponding to value specified in
ipslaEthernetGrpCtrlRttType.
As long as the value of this object is specified, the value of
ipslaEthernetGrpCtrlDomainNameType must be set to 'charString'."
::= { ipslaEthernetGrpCtrlEntry 12 }
ipslaEthernetGrpCtrlReqDataSize OBJECT-TYPE
SYNTAX Unsigned32 (0..1400 )
UNITS "octets"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the padding that needs to be inserted
into each ethernet frame of the IP SLA operation.
The total ethernet frame size of the IP SLA operation is:
CFM_header + TLVs + si_length + dm_length + padding size
where dm_length = number of octets of the maintenance domain name
si_length = number of octets of the service instance name
CFM_header = 8 octets
TLVs = 60 octets for 'ethernetPing'
45 octets for 'ethernetJitter'
If the total frame size exceeds 1500, only 1500 will be
sent to the target MEP."
DEFVAL { 0 }
::= { ipslaEthernetGrpCtrlEntry 13 }
ipslaEthernetGrpCtrlMPIDExLst OBJECT-TYPE
SYNTAX RttMonIdLst
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the identifiers of the MEPs that will
be excluded when create IP SLA operations by Auto-Ethernet-CFM
operation."
::= { ipslaEthernetGrpCtrlEntry 14 }
ipslaEthernetGrpCtrlCOS OBJECT-TYPE
SYNTAX Layer2Cos
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the Class Of Service field in an
Ethernet frame header."
DEFVAL { 0 }
::= { ipslaEthernetGrpCtrlEntry 15 }
ipslaEthernetGrpCtrlInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..60000 )
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value specifies the inter-frame delay between Ethernet
frames that need to be transmitted to the target MEPs.
This object is applicable to 'ethernetJitter' operation only."
DEFVAL { 20 }
::= { ipslaEthernetGrpCtrlEntry 16 }
ipslaEthernetGrpCtrlNumFrames OBJECT-TYPE
SYNTAX Unsigned32 (1..60000 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value specifies the number of Ethernet frames that need
to be transmitted to the target MEPs.
This object is applicable to 'ethernetJitter' operation only."
DEFVAL { 10 }
::= { ipslaEthernetGrpCtrlEntry 17 }
ipslaEthernetGrpScheduleRttStartTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the time when this conceptual row
will become 'active'. ipslaEthernetGrpSchedulePeriod object
must be specified before setting this object.
When sysUpTime equals this value, this object will
cause the conceptual Auto-Ethernet-CFM row transmit
to 'active'and start to discover the existing MEPs.
Meanwhile the IP SLA operations will be created for
each discovered MEP, and rttMonCtrlAdminStatus of each
IP SLA operation will transmit to 'active'.
If this object has value as 1, the conceptual Auto-Ethernet-CFM
row will transmit to 'active' right now.
Value of 0 puts this conceptual row in pending state."
DEFVAL { 0 }
::= { ipslaEthernetGrpCtrlEntry 18 }
ipslaEthernetGrpSchedulePeriod OBJECT-TYPE
SYNTAX Unsigned32 (1..604800 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time duration over which all the IP SLA
operations created by the current Auto-Ethernet-CFM
have to be scheduled.
For instance, if there are three MEPs discovered, there
will be three IP SLA operations created. If this object
is set to 30, ipslaEthernetGrpScheduleRttStartTime is set
to T, the start time of three operations will be
spreaded evenly within 30 seconds, i.e.
start time: T+0 -------- T+9 ----------T+19
operation1 operation2 operation3
This object must be set first before setting
ipslaEthernetGrpScheduleRttStartTime."
::= { ipslaEthernetGrpCtrlEntry 19 }
ipslaEthernetGrpScheduleFrequency OBJECT-TYPE
SYNTAX Unsigned32 (1..604800 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration between initiating each IP SLA
operation created by the Auto-Ethernet-CFM.
Take above example, if the ipslaEthernetGrpScheduleFrequency
is set to 60, then the start time of each IP SLA operation
like:
start time: T+0 -------- T+9 ----------T+19-----
operation1 operation2 operation3
start again: --T+60-------- T+69 ----------T+79--
operation1 operation2 operation3
start 3rd time:--T+120-------- T+129 ----------T+139--
operation1 operation2 operation3
This object cannot be set to a value which would be a
shorter duration than ipslaEthernetGrpCtrlTimeout.
The default value of this object is the value set to
ipslaEthernetGrpSchedulePeriod.
This value will be passed to rttMonCtrlAdminFrequency for
all the IP SLA operations created by the Auto-Ethernet-CFM."
::= { ipslaEthernetGrpCtrlEntry 20 }
-- Auto-Ethernet-CFM Reaction Table
ipslaEthernetGrpReactTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaEthernetGrpReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains the reaction configurations for
Auto-Ethernet-CFM operation.
The reaction configuration specifies the network perfomance
parameter needs to be monitored, the threshold for the parameter,
the type of threshold violation that will trigger a reaction,
and how to react upon a threshold being violated.
This allows for proactive monitoring in an environment where
user can be alerted to potential network problems, rather than
having to manually examine data.
Each conceptual row in ipslaEthernetGrpReactTable corresponds
to a reaction configured for a corresponding Auto-Ethernet-CFM
operation.
Each Auto-Ethernet-CFM operation can have multiple parameters
monitored and hence there can be multiple reaction configuration
rows for a particular Auto-Ethernet-CFM operation.
The reaction configurations in this table for a particular
Auto-Ethernet-CFM operation will be passed to the
corresponding objects in rttMonReactTable of CISCO-RTTMON-MIB
for all the IP SLA operations created by this Auto-Ethernet-CFM.
This makes the IP SLA operation capable of reacting to certain
measured network condition such as long round trip delay,
big jitter, etc., by generating a notification to a network
management application based on defined thresholds.
- Objects in this table - Corresponding objects in
rttMonReactTable
ipslaEthernetGrpReactConfigIndex rttMonReactConfigIndex
ipslaEthernetGrpReactVar rttMonReactVar
ipslaEthernetGrpReactThresholdType rttMonReactThresholdType
ipslaEthernetGrpReactThresholdRising rttMonReactThresholdRising
ipslaEthernetGrpReactThresholdFalling rttMonReactThresholdFalling
ipslaEthernetGrpReactThresholdCountX rttMonReactThresholdCountX
ipslaEthernetGrpReactThresholdCountY rttMonReactThresholdCountY
ipslaEthernetGrpReactActionType rttMonReactActionType
ipslaEthernetGrpReactStatus rttMonReactStatus
This table is coupled with ipslaEthernetGrpCtrlTable. When an
entry in the ipslaEthernetGrpCtrlTable is destroyed, the
corresponding entries in this table will be destroyed too."
::= { ipslaEthernetGrpCtrl 2 }
ipslaEthernetGrpReactEntry OBJECT-TYPE
SYNTAX IpslaEthernetGrpReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of objects that define a conceptual
Auto-Ethernet-CFM reaction configuration row.
In order to create this conceptual row,
ipslaEthernetGrpReactStatus must be set to 'createAndGo' and
ipslaEthernetGrpReactVar must be specified.
This conceptual row can be deleted at any time by set
ipslaEthernetGrpReactStatus to 'destroy'. When this row is
deleted, the corresponding reaction configuration of all the
IP SLA operations are deleted."
INDEX {
ipslaEthernetGrpCtrlIndex,
ipslaEthernetGrpReactConfigIndex
}
::= { ipslaEthernetGrpReactTable 1 }
IpslaEthernetGrpReactEntry ::= SEQUENCE {
ipslaEthernetGrpReactConfigIndex RttMonCtrlIndex,
ipslaEthernetGrpReactStatus RowStatus,
ipslaEthernetGrpReactStorageType StorageType,
ipslaEthernetGrpReactVar RttMonReactVar,
ipslaEthernetGrpReactThresholdType INTEGER ,
ipslaEthernetGrpReactThresholdRising Unsigned32,
ipslaEthernetGrpReactThresholdFalling Unsigned32,
ipslaEthernetGrpReactThresholdCountX Unsigned32,
ipslaEthernetGrpReactThresholdCountY Unsigned32,
ipslaEthernetGrpReactActionType INTEGER
}
ipslaEthernetGrpReactConfigIndex OBJECT-TYPE
SYNTAX RttMonCtrlIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object along with ipslaEthernetGrpCtrlEntry identifies
a particular reaction-configuration for a particular
Auto-Ethernet-CFM operation.
This is a pseudo-random number selected by the management
station when creating a row via the ipslaEthernetGrpReactStatus.
If the pseudo-random number is already in use an
'inconsistentValue' return code will be returned when
set operation is attempted.
"
::= { ipslaEthernetGrpReactEntry 1 }
ipslaEthernetGrpReactStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This objects specifies the status of the conceptual
Auto-Ethernet-CFM reaction control row. Only 'createAndGo'
and 'destroy' operations are permitted on the row.
In order for this object to become 'active',
ipslaEthernetGrpReactVar must be defined.
All other objects assume the default value.
When this object is in 'active' state, all the writable objects
except ipslaEthernetGrpReactVar can be modified.
When this object moves to 'active' state, the rttMonReactStatus
of the individual IP SLA operations moves to 'active' state, thus
the performance parameter specified in the reaction configuration
is monitored for each IP SLA operation and the notifications are
generated when the threshold violation takes place.
This object can be set to 'destroy' from any value at any time.
When this object is set to 'destroy', the reaction configuration
of both Auto-Ethernet-CFM operation and IP SLA operations
are removed."
::= { ipslaEthernetGrpReactEntry 2 }
ipslaEthernetGrpReactStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { ipslaEthernetGrpReactEntry 3 }
ipslaEthernetGrpReactVar OBJECT-TYPE
SYNTAX RttMonReactVar
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the performance parameter that will
be monitored by the IP SLA operations which are created
via Auto-Ethernet-CFM operation.
The performance parameters that are valid to both
'ethernetJitter' and 'ethernetPing' include:
- 'connectionLoss'
- 'rtt'
- 'timeout'
The performance parameters that are only valid to
'ethernetJitter' include:
- 'jitterSDAvg'
- 'jitterDSAvg'
- 'jitterAvg'
- 'maxOfPositiveSD'
- 'maxOfNegativeSD'
- 'maxOfPositiveDS'
- 'maxOfNegativeDS'
- 'packetLateArrival'
- 'packetLossDS'
- 'packetLossSD'
- 'packetOutOfSequence'
- 'packetMIA'
"
::= { ipslaEthernetGrpReactEntry 4 }
ipslaEthernetGrpReactThresholdType OBJECT-TYPE
SYNTAX INTEGER {
never(1),
immediate(2),
consecutive(3),
xOfy(4),
average(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of threshold violation that
will trigger an notification.
The notification will be sent accordingly only when the object
rttMonReactOccurred which is defined in CISCO-RTTMON-MIB for IP
SLA operation is set to 'true' or 'false'.
'never' - rttMonReactOccurred is never set
'immediate' - rttMonReactOccurred is set to 'true' when the
value of parameter for which reaction is
configured ( e.g. rtt, jitterAvg) violates the
threshold.
Conversely, rttMonReactOccurred is set to 'false'
when the parameter ( e.g. rtt, jitterAvg) is below
the threshold limits.
'consecutive'- rttMonReactOccurred is set to true when the value
of parameter for which reaction is configured
( e.g. rtt, jitterAvg) violates the threshold for
configured consecutive times.
Conversely, rttMonReactOccurred is set to false
when the value of parameter ( e.g. rtt, jitterAvg)
is below the threshold limits for the same number
of consecutive operations.
'xOfy' - rttMonReactOccurred is set to true when x
( as specified by
ipslaEthernetGrpReactThresholdCountX )
out of the last y ( as specified by
ipslaEthernetGrpReactThresholdCountY ) times the
value of parameter for which the reaction is
configured ( e.g. rtt, jitterAvg) violates the
threshold.
Conversely, it is set to false when x, out of the
last y times the value of parameter ( e.g. rtt,
jitterAvg) is below the threshold limits.
'average' - rttMonReactOccurred is set to true when the
average (ipslaEthernetGrpReactThresholdCountX
times ) value of parameter for which reaction is
configured ( e.g. rtt, jitterAvg) violates the
threshold condition.
Conversely, it is set to false when the average
value of parameter ( e.g. rtt, jitterAvg)."
DEFVAL { never }
::= { ipslaEthernetGrpReactEntry 5 }
ipslaEthernetGrpReactThresholdRising OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the higher threshold limit.
If the value of monitored parameter ( e.g rtt, jitterAvg,
packetLossSD etc ) rises above this limit and if the condition
specified in ipslaEthernetGrpReactThresholdType are satisfied,
a notification is generated.
Default value of ipslaEthernetGrpReactThresholdRising for
'rtt' is 5000.
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' is 100.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
This object is not applicable if the ipslaEthernetGrpReactVar
is 'timeout' or 'connectionLoss'. For 'timeout' and
'connectionLoss', the default value will be 0."
::= { ipslaEthernetGrpReactEntry 6 }
ipslaEthernetGrpReactThresholdFalling OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the lower threshold limit.
If the value of monitored parameter ( e.g rtt, jitterAvg,
packetLossSD etc ) falls below this limit and if the condition
specified in ipslaEthernetGrpReactThresholdType are satisfied,
a notification is generated.
Default value of ipslaEthernetGrpReactThresholdFalling for
'rtt' is 3000.
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' is 100.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
This object is not applicable if the ipslaEthernetGrpReactVar
is 'timeout' or 'connectionLoss'. For 'timeout' and
'connectionLoss', the default value will be 0."
::= { ipslaEthernetGrpReactEntry 7 }
ipslaEthernetGrpReactThresholdCountX OBJECT-TYPE
SYNTAX Unsigned32 (1..16 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If ipslaEthernetGrpReactThresholdType value is 'xOfy', this
object specifies the 'x' value.
If ipslaEthernetGrpReactThresholdType value is 'consecutive',
this object specifies the number of consecutive occurrences
that needs threshold violation before setting
rttMonReactOccurred as 'true'.
If ipslaEthernetGrpReactThresholdType value is 'average',
this object specifies the number of samples that needs be
considered for calculating average.
This object has no meaning if ipslaEthernetGrpReactThresholdType
has value of 'never' and 'immediate'."
DEFVAL { 5 }
::= { ipslaEthernetGrpReactEntry 8 }
ipslaEthernetGrpReactThresholdCountY OBJECT-TYPE
SYNTAX Unsigned32 (1..16 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the 'y' value of the xOfy condition
if ipslaEthernetGrpReactThresholdType is 'xOfy'.
For other values of ipslaEthernetGrpReactThresholdType, this
object is not applicable."
DEFVAL { 5 }
::= { ipslaEthernetGrpReactEntry 9 }
ipslaEthernetGrpReactActionType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
notification(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies what type of reaction to generate
if an IP SLA operation violates one of the watched
conditions (specified in ipslaEthernetGrpReactVar):
'none' - no reaction is generated.
'notification' - a notification is generated."
DEFVAL { none }
::= { ipslaEthernetGrpReactEntry 10 }
-- LatestEthernetJitterOper Table
ipslaEtherJitterLatestStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaEtherJitterLatestStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 'ethernetJitter' operation sends out frames at the
frequency specified by rttMonCtrlAdminFrequency.
This table contains the statistics calculated for the
latest sent frames.
Each conceptual row in this table corresponds to an
'ethernetJitter' operation defined in rttMonCtrlAdminTable
and has same index as rttMonCtrlAdminTable."
::= { ipslaEthernetLatestOper 1 }
ipslaEtherJitterLatestStatsEntry OBJECT-TYPE
SYNTAX IpslaEtherJitterLatestStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A collection of objects that record the latest Ethernet jitter
operation.
An entry is created only when the following
objects are valid.
- rttMonCtrlAdminRttType
- rttMonEchoAdminProtocol
The entry will start to collect data when rttMonCtrlAdminStatus
is in 'active' state. The entry will be removed when the
rttMonCtrlAdminStatus is changed to 'destroy' state."
INDEX { rttMonCtrlAdminIndex }
::= { ipslaEtherJitterLatestStatsTable 1 }
IpslaEtherJitterLatestStatsEntry ::= SEQUENCE {
ipslaEtherJitterLatestNumRTT Gauge32,
ipslaEtherJitterLatestRTTSum Gauge32,
ipslaEtherJitterLatestRTTSum2 Gauge32,
ipslaEtherJitterLatestRTTMin Gauge32,
ipslaEtherJitterLatestRTTMax Gauge32,
ipslaEtherJitterLatestMinPosSD Gauge32,
ipslaEtherJitterLatestMaxPosSD Gauge32,
ipslaEtherJitterLatestNumPosSD Gauge32,
ipslaEtherJitterLatestSumPosSD Gauge32,
ipslaEtherJitterLatestSum2PosSD Gauge32,
ipslaEtherJitterLatestMinNegSD Gauge32,
ipslaEtherJitterLatestMaxNegSD Gauge32,
ipslaEtherJitterLatestNumNegSD Gauge32,
ipslaEtherJitterLatestSumNegSD Gauge32,
ipslaEtherJitterLatestSum2NegSD Gauge32,
ipslaEtherJitterLatestMinPosDS Gauge32,
ipslaEtherJitterLatestMaxPosDS Gauge32,
ipslaEtherJitterLatestNumPosDS Gauge32,
ipslaEtherJitterLatestSumPosDS Gauge32,
ipslaEtherJitterLatestSum2PosDS Gauge32,
ipslaEtherJitterLatestMinNegDS Gauge32,
ipslaEtherJitterLatestMaxNegDS Gauge32,
ipslaEtherJitterLatestNumNegDS Gauge32,
ipslaEtherJitterLatestSumNegDS Gauge32,
ipslaEtherJitterLatestSum2NegDS Gauge32,
ipslaEtherJitterLatestFrmLossSD Gauge32,
ipslaEtherJitterLatestFrmLossDS Gauge32,
ipslaEtherJitterLatestFrmOutSeq Gauge32,
ipslaEtherJitterLatestFrmMIA Gauge32,
ipslaEtherJitterLatestFrmSkipped Gauge32,
ipslaEtherJitterLatestSense RttResponseSense,
ipslaEtherJitterLatestFrmLateA Gauge32,
ipslaEtherJitterLatestMinSucFrmL Gauge32,
ipslaEtherJitterLatestMaxSucFrmL Gauge32,
ipslaEtherJitterLatestOWSumSD Gauge32,
ipslaEtherJitterLatestOWSum2SD Gauge32,
ipslaEtherJitterLatestOWMinSD Gauge32,
ipslaEtherJitterLatestOWMaxSD Gauge32,
ipslaEtherJitterLatestOWSumDS Gauge32,
ipslaEtherJitterLatestOWSum2DS Gauge32,
ipslaEtherJitterLatestOWMinDS Gauge32,
ipslaEtherJitterLatestOWMaxDS Gauge32,
ipslaEtherJitterLatestNumOW Gauge32,
ipslaEtherJitterLatestAvgJitter Gauge32,
ipslaEtherJitterLatestAvgSDJ Gauge32,
ipslaEtherJitterLatestAvgDSJ Gauge32,
ipslaEtherJitterLatestOWAvgSD Gauge32,
ipslaEtherJitterLatestOWAvgDS Gauge32,
ipslaEtherJitterLatestIAJOut Gauge32,
ipslaEtherJitterLatestIAJIn Gauge32,
ipslaEtherJLatestFrmUnProcessed Gauge32
}
ipslaEtherJitterLatestNumRTT OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT's that were successfully measured."
::= { ipslaEtherJitterLatestStatsEntry 1 }
ipslaEtherJitterLatestRTTSum OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's that are successfully measured.
The number of successfully measured RTT is
stored in ipslaEtherJitterLatestNumRTT."
::= { ipslaEtherJitterLatestStatsEntry 2 }
ipslaEtherJitterLatestRTTSum2 OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured."
::= { ipslaEtherJitterLatestStatsEntry 3 }
ipslaEtherJitterLatestRTTMin OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTT's that were successfully measured."
::= { ipslaEtherJitterLatestStatsEntry 4 }
ipslaEtherJitterLatestRTTMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTT's that were successfully measured."
::= { ipslaEtherJitterLatestStatsEntry 5 }
ipslaEtherJitterLatestMinPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values for frames sent
from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 6 }
ipslaEtherJitterLatestMaxPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values for frames sent
from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 7 }
ipslaEtherJitterLatestNumPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for frames
sent from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 8 }
ipslaEtherJitterLatestSumPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for frames sent
source to destination. The number of such values
is stored in ipslaEtherJitterLatestNumPosSD."
::= { ipslaEtherJitterLatestStatsEntry 9 }
ipslaEtherJitterLatestSum2PosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all positive jitter values for
frames sent from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 10 }
ipslaEtherJitterLatestMinNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute values of all negative jitter values
for frames sent from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 11 }
ipslaEtherJitterLatestMaxNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute values of all negative jitter values
for frames sent from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 12 }
ipslaEtherJitterLatestNumNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for frames
sent from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 13 }
ipslaEtherJitterLatestSumNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for frames sent
from source to destination. The number of such values
is stored in ipslaEtherJitterLatestNumNegSD."
::= { ipslaEtherJitterLatestStatsEntry 14 }
ipslaEtherJitterLatestSum2NegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all negative jitter values for
frames sent from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 15 }
ipslaEtherJitterLatestMinPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 16 }
ipslaEtherJitterLatestMaxPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 17 }
ipslaEtherJitterLatestNumPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for frames
sent from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 18 }
ipslaEtherJitterLatestSumPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for frames sent
from destination to source. The number of such values
is stored in ipslaEtherJitterLatestNumPosDS."
::= { ipslaEtherJitterLatestStatsEntry 19 }
ipslaEtherJitterLatestSum2PosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all positive jitter values for
frames sent from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 20 }
ipslaEtherJitterLatestMinNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 21 }
ipslaEtherJitterLatestMaxNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 22 }
ipslaEtherJitterLatestNumNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for frames
sent from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 23 }
ipslaEtherJitterLatestSumNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for frames sent
from destination to source. The number of such values
is stored in ipslaEtherJitterLatestNumNegDS."
::= { ipslaEtherJitterLatestStatsEntry 24 }
ipslaEtherJitterLatestSum2NegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all negative jitter values for
frames sent from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 25 }
ipslaEtherJitterLatestFrmLossSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames lost when sent from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 26 }
ipslaEtherJitterLatestFrmLossDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames lost when sent from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 27 }
ipslaEtherJitterLatestFrmOutSeq OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of frames arrived out of sequence."
::= { ipslaEtherJitterLatestStatsEntry 28 }
ipslaEtherJitterLatestFrmMIA OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that are lost for which we cannot determine
the direction."
::= { ipslaEtherJitterLatestStatsEntry 29 }
ipslaEtherJitterLatestFrmSkipped OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames in the operation that could not be
initiated due to an internal error."
::= { ipslaEtherJitterLatestStatsEntry 30 }
ipslaEtherJitterLatestSense OBJECT-TYPE
SYNTAX RttResponseSense
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An application specific sense code for the completion status."
::= { ipslaEtherJitterLatestStatsEntry 31 }
ipslaEtherJitterLatestFrmLateA OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that arrived after the timeout."
::= { ipslaEtherJitterLatestStatsEntry 32 }
ipslaEtherJitterLatestMinSucFrmL OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of frames that are dropped
successively."
::= { ipslaEtherJitterLatestStatsEntry 33 }
ipslaEtherJitterLatestMaxSucFrmL OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of frames that are dropped
successively."
::= { ipslaEtherJitterLatestStatsEntry 34 }
ipslaEtherJitterLatestOWSumSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 35 }
ipslaEtherJitterLatestOWSum2SD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from source to
destination."
::= { ipslaEtherJitterLatestStatsEntry 36 }
ipslaEtherJitterLatestOWMinSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from
source to destination."
::= { ipslaEtherJitterLatestStatsEntry 37 }
ipslaEtherJitterLatestOWMaxSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from
source to destination."
::= { ipslaEtherJitterLatestStatsEntry 38 }
ipslaEtherJitterLatestOWSumDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 39 }
ipslaEtherJitterLatestOWSum2DS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from
destination to source."
::= { ipslaEtherJitterLatestStatsEntry 40 }
ipslaEtherJitterLatestOWMinDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from
destination to source."
::= { ipslaEtherJitterLatestStatsEntry 41 }
ipslaEtherJitterLatestOWMaxDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from
destination to source."
::= { ipslaEtherJitterLatestStatsEntry 42 }
ipslaEtherJitterLatestNumOW OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful one way trip time measurements."
::= { ipslaEtherJitterLatestStatsEntry 43 }
ipslaEtherJitterLatestAvgJitter OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
in Source-to-Destination and Destination-to-Source
direction."
::= { ipslaEtherJitterLatestStatsEntry 44 }
ipslaEtherJitterLatestAvgSDJ OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 45 }
ipslaEtherJitterLatestAvgDSJ OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 46 }
ipslaEtherJitterLatestOWAvgSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one way trip time from source to destination."
::= { ipslaEtherJitterLatestStatsEntry 47 }
ipslaEtherJitterLatestOWAvgDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one way trip time from destination to source."
::= { ipslaEtherJitterLatestStatsEntry 48 }
ipslaEtherJitterLatestIAJOut OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inter-arrival jitter (RFC 1889) at responder."
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { ipslaEtherJitterLatestStatsEntry 49 }
ipslaEtherJitterLatestIAJIn OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inter-arrival jitter (RFC 1889) at source."
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { ipslaEtherJitterLatestStatsEntry 50 }
ipslaEtherJLatestFrmUnProcessed OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames in the operation that could not be
processed due to high CPU load."
::= { ipslaEtherJitterLatestStatsEntry 51 }
-- Ethernet Jitter Statistics Table
ipslaEtherJitterAggStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpslaEtherJitterAggStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The 'ethernetJitter' statistics table contains summarized
information of the results for a conceptual control
row. A rolling accumulated history of this information
is maintained in a series of hourly 'group(s)'.
When ipslaEtherJAggStatsStartTimeId groups exceeds
the rttMonStatisticsAdminNumHourGroups value, the
oldest corresponding hourly group will be deleted and will
be replaced with the new ipslaEtherJAggStatsStartTimeId
hourly group."
::= { ipslaEthernetStats 1 }
ipslaEtherJitterAggStatsEntry OBJECT-TYPE
SYNTAX IpslaEtherJitterAggStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains the objects which accumulate the
results of a series of 'ethernetJitter' operations
over a 60 minute time period or a time period stored
in rttMonScheduleAdminRttLife, whichever is smaller.
An entry is created only if when the following
objects are valid.
- rttMonCtrlAdminRttType
- rttMonEchoAdminProtocol
The entry will start to collect data when rttMonCtrlAdminStatus
is in 'active' state. The entry will be removed when the
rttMonCtrlAdminStatus is changed to 'destroy' state."
INDEX {
rttMonCtrlAdminIndex,
ipslaEtherJAggStatsStartTimeId
}
::= { ipslaEtherJitterAggStatsTable 1 }
IpslaEtherJitterAggStatsEntry ::= SEQUENCE {
ipslaEtherJAggStatsStartTimeId TimeStamp,
ipslaEtherJAggMeasuredCmpletions Counter32,
ipslaEtherJAggMeasuredOvThrshlds Counter32,
ipslaEtherJAggMeasuredNumRTTs Counter32,
ipslaEtherJAggMeasuredRTTSums Counter32,
ipslaEtherJAggMeasuredRTTSum2Ls Counter32,
ipslaEtherJAggMeasuredRTTSum2Hs Counter32,
ipslaEtherJAggMeasuredRTTMin Gauge32,
ipslaEtherJAggMeasuredRTTMax Gauge32,
ipslaEtherJAggMeasuredMinPosSD Gauge32,
ipslaEtherJAggMeasuredMaxPosSD Gauge32,
ipslaEtherJAggMeasuredNumPosSDs Counter32,
ipslaEtherJAggMeasuredSumPosSDs Counter32,
ipslaEtherJAggMeasuredSum2PSDLs Counter32,
ipslaEtherJAggMeasuredSum2PSDHs Counter32,
ipslaEtherJAggMeasuredMinNegSD Gauge32,
ipslaEtherJAggMeasuredMaxNegSD Gauge32,
ipslaEtherJAggMeasuredNumNegSDs Counter32,
ipslaEtherJAggMeasuredSumNegSDs Counter32,
ipslaEtherJAggMeasuredSum2NSDLs Counter32,
ipslaEtherJAggMeasuredSum2NSDHs Counter32,
ipslaEtherJAggMeasuredMinPosDS Gauge32,
ipslaEtherJAggMeasuredMaxPosDS Gauge32,
ipslaEtherJAggMeasuredNumPosDSes Counter32,
ipslaEtherJAggMeasuredSumPosDSes Counter32,
ipslaEtherJAggMeasuredSum2PDSLs Counter32,
ipslaEtherJAggMeasuredSum2PDSHs Counter32,
ipslaEtherJAggMeasuredMinNegDS Gauge32,
ipslaEtherJAggMeasuredMaxNegDS Gauge32,
ipslaEtherJAggMeasuredNumNegDSes Counter32,
ipslaEtherJAggMeasuredSumNegDSes Counter32,
ipslaEtherJAggMeasuredSum2NDSLs Counter32,
ipslaEtherJAggMeasuredSum2NDSHs Counter32,
ipslaEtherJAggMeasuredFrmLossSDs Counter32,
ipslaEtherJAggMeasuredFrmLssDSes Counter32,
ipslaEtherJAggMeasuredFrmOutSeqs Counter32,
ipslaEtherJAggMeasuredFrmMIAes Counter32,
ipslaEtherJAggMeasuredFrmSkippds Counter32,
ipslaEtherJAggMeasuredErrors Counter32,
ipslaEtherJAggMeasuredBusies Counter32,
ipslaEtherJAggMeasuredOWSumSDs Counter32,
ipslaEtherJAggMeasuredOWSum2SDLs Counter32,
ipslaEtherJAggMeasuredOWSum2SDHs Counter32,
ipslaEtherJAggMeasuredOWMinSD Gauge32,
ipslaEtherJAggMeasuredOWMaxSD Gauge32,
ipslaEtherJAggMeasuredOWSumDSes Counter32,
ipslaEtherJAggMeasuredOWSum2DSLs Counter32,
ipslaEtherJAggMeasuredOWSum2DSHs Counter32,
ipslaEtherJAggMeasuredOWMinDS Gauge32,
ipslaEtherJAggMeasuredOWMaxDS Gauge32,
ipslaEtherJAggMeasuredNumOWs Counter32,
ipslaEtherJAggMeasuredAvgJ Gauge32,
ipslaEtherJAggMeasuredAvgJSD Gauge32,
ipslaEtherJAggMeasuredAvgJDS Gauge32,
ipslaEtherJAggMinSucFrmLoss Gauge32,
ipslaEtherJAggMaxSucFrmLoss Gauge32,
ipslaEtherJAggMeasuredIAJOut Gauge32,
ipslaEtherJAggMeasuredIAJIn Gauge32,
ipslaEtherJAggMeasuredFrmLateAs Counter32,
ipslaEtherJAggMeasuredFrmUnPrcds Counter32
}
ipslaEtherJAggStatsStartTimeId OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sysUpTime at the time when this
row was created."
::= { ipslaEtherJitterAggStatsEntry 1 }
ipslaEtherJAggMeasuredCmpletions OBJECT-TYPE
SYNTAX Counter32
UNITS "completions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Ethernet jitter operations that have completed
successfully."
::= { ipslaEtherJitterAggStatsEntry 2 }
ipslaEtherJAggMeasuredOvThrshlds OBJECT-TYPE
SYNTAX Counter32
UNITS "operations"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Ethernet jitter operations that violate
jitterAvg threshold which is defined in RttMonReactVar."
::= { ipslaEtherJitterAggStatsEntry 3 }
ipslaEtherJAggMeasuredNumRTTs OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTTs that are successfully measured."
::= { ipslaEtherJitterAggStatsEntry 4 }
ipslaEtherJAggMeasuredRTTSums OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTTs that are successfully measured for this
ipslaEtherJAggMeasuredStartTimeId hourly group. The number
of the successfully measured RTT is stored in the
ipslaEtherJAggMeasuredNumRTTs."
::= { ipslaEtherJitterAggStatsEntry 5 }
ipslaEtherJAggMeasuredRTTSum2Ls OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTTs that are successfully measured
(low order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 6 }
ipslaEtherJAggMeasuredRTTSum2Hs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTTs that are successfully measured
(high order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 7 }
ipslaEtherJAggMeasuredRTTMin OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTTs that were successfully measured."
::= { ipslaEtherJitterAggStatsEntry 8 }
ipslaEtherJAggMeasuredRTTMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTTs that were successfully measured."
::= { ipslaEtherJitterAggStatsEntry 9 }
ipslaEtherJAggMeasuredMinPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute values of all positive jitter values
for frames sent from source to destination."
::= { ipslaEtherJitterAggStatsEntry 10 }
ipslaEtherJAggMeasuredMaxPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute values of all positive jitter values
for frames sent from source to destination."
::= { ipslaEtherJitterAggStatsEntry 11 }
ipslaEtherJAggMeasuredNumPosSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for frames
sent from source to destination."
::= { ipslaEtherJitterAggStatsEntry 12 }
ipslaEtherJAggMeasuredSumPosSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for frames sent
from source to destination. The number of such values
is stored in ipslaEtherJAggMeasuredNumPosSDs."
::= { ipslaEtherJitterAggStatsEntry 13 }
ipslaEtherJAggMeasuredSum2PSDLs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all positive jitter values for frames
sent from source to destination (low order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 14 }
ipslaEtherJAggMeasuredSum2PSDHs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all positive jitter values for frames
sent from source to destination (high order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 15 }
ipslaEtherJAggMeasuredMinNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values for frames sent
from source to destination."
::= { ipslaEtherJitterAggStatsEntry 16 }
ipslaEtherJAggMeasuredMaxNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values for frames sent
from source to destination."
::= { ipslaEtherJitterAggStatsEntry 17 }
ipslaEtherJAggMeasuredNumNegSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for frames
sent from source to destination."
::= { ipslaEtherJitterAggStatsEntry 18 }
ipslaEtherJAggMeasuredSumNegSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for frames sent
from source to destination. The number of such values
is stored in ipslaEtherJAggMeasuredNumNegSDs."
::= { ipslaEtherJitterAggStatsEntry 19 }
ipslaEtherJAggMeasuredSum2NSDLs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all negative jitter values for
frames sent from source to destination (low order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 20 }
ipslaEtherJAggMeasuredSum2NSDHs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all negative jitter values for
frames sent from source to destination (high order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 21 }
ipslaEtherJAggMeasuredMinPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterAggStatsEntry 22 }
ipslaEtherJAggMeasuredMaxPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterAggStatsEntry 23 }
ipslaEtherJAggMeasuredNumPosDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for frames
sent from destination to source."
::= { ipslaEtherJitterAggStatsEntry 24 }
ipslaEtherJAggMeasuredSumPosDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for frames sent
from destination to source. The number of such values
is stored in ipslaEtherJAggMeasuredNumPosDSes."
::= { ipslaEtherJitterAggStatsEntry 25 }
ipslaEtherJAggMeasuredSum2PDSLs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all positive jitter values for
frames sent from destination to source (low order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 26 }
ipslaEtherJAggMeasuredSum2PDSHs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all positive jitter values for
frames sent from destination to source (high order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 27 }
ipslaEtherJAggMeasuredMinNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterAggStatsEntry 28 }
ipslaEtherJAggMeasuredMaxNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values for frames sent
from destination to source."
::= { ipslaEtherJitterAggStatsEntry 29 }
ipslaEtherJAggMeasuredNumNegDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for frames
sent from destination to source."
::= { ipslaEtherJitterAggStatsEntry 30 }
ipslaEtherJAggMeasuredSumNegDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for frames sent
from destination to source. The number of such values
is stored in ipslaEtherJAggMeasuredNumNegDSes."
::= { ipslaEtherJitterAggStatsEntry 31 }
ipslaEtherJAggMeasuredSum2NDSLs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all negative jitter values for
frames sent from destination to source (low order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 32 }
ipslaEtherJAggMeasuredSum2NDSHs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all negative jitter values for
frames sent from destination to source (high order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 33 }
ipslaEtherJAggMeasuredFrmLossSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost frames when sent from source to destination."
::= { ipslaEtherJitterAggStatsEntry 34 }
ipslaEtherJAggMeasuredFrmLssDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost frames when sent from destination to source."
::= { ipslaEtherJitterAggStatsEntry 35 }
ipslaEtherJAggMeasuredFrmOutSeqs OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The number of frames arrived out of sequence."
::= { ipslaEtherJitterAggStatsEntry 36 }
ipslaEtherJAggMeasuredFrmMIAes OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that are lost for which we cannot determine
the direction."
::= { ipslaEtherJitterAggStatsEntry 37 }
ipslaEtherJAggMeasuredFrmSkippds OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that are skipped per operation because
the router could not send the packet out."
::= { ipslaEtherJitterAggStatsEntry 38 }
ipslaEtherJAggMeasuredErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when an Ethernet jitter operation could
not be initiated because of an internal error."
::= { ipslaEtherJitterAggStatsEntry 39 }
ipslaEtherJAggMeasuredBusies OBJECT-TYPE
SYNTAX Counter32
UNITS "busies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when an Ethernet jitter operation could
not be initiated because a previous Ethernet jitter operation
has not been completed."
::= { ipslaEtherJitterAggStatsEntry 40 }
ipslaEtherJAggMeasuredOWSumSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from source to destination."
::= { ipslaEtherJitterAggStatsEntry 41 }
ipslaEtherJAggMeasuredOWSum2SDLs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from source to
destination (low order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 42 }
ipslaEtherJAggMeasuredOWSum2SDHs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from source to
destination (high order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 43 }
ipslaEtherJAggMeasuredOWMinSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from source to
destination."
::= { ipslaEtherJitterAggStatsEntry 44 }
ipslaEtherJAggMeasuredOWMaxSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from source to
destination."
::= { ipslaEtherJitterAggStatsEntry 45 }
ipslaEtherJAggMeasuredOWSumDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from destination to source."
::= { ipslaEtherJitterAggStatsEntry 46 }
ipslaEtherJAggMeasuredOWSum2DSLs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from destination
to source (low order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 47 }
ipslaEtherJAggMeasuredOWSum2DSHs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from destination
to source (high order 32 bits)."
::= { ipslaEtherJitterAggStatsEntry 48 }
ipslaEtherJAggMeasuredOWMinDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from destination
to source."
::= { ipslaEtherJitterAggStatsEntry 49 }
ipslaEtherJAggMeasuredOWMaxDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from destination
to source."
::= { ipslaEtherJitterAggStatsEntry 50 }
ipslaEtherJAggMeasuredNumOWs OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of one way trip time that are successfully
measured."
::= { ipslaEtherJitterAggStatsEntry 51 }
ipslaEtherJAggMeasuredAvgJ OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values for source-to-destination and
destination-to-source direction."
::= { ipslaEtherJitterAggStatsEntry 52 }
ipslaEtherJAggMeasuredAvgJSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values in source-to-destination direction."
::= { ipslaEtherJitterAggStatsEntry 53 }
ipslaEtherJAggMeasuredAvgJDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values in destination-to-source direction."
::= { ipslaEtherJitterAggStatsEntry 54 }
ipslaEtherJAggMinSucFrmLoss OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of frames that are dropped
successively."
::= { ipslaEtherJitterAggStatsEntry 55 }
ipslaEtherJAggMaxSucFrmLoss OBJECT-TYPE
SYNTAX Gauge32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of frames that are dropped
successively."
::= { ipslaEtherJitterAggStatsEntry 56 }
ipslaEtherJAggMeasuredIAJOut OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inter-arrival jitter (RFC 1889) at responder"
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { ipslaEtherJitterAggStatsEntry 57 }
ipslaEtherJAggMeasuredIAJIn OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "Inter-arrival jitter (RFC 1889) at sender"
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { ipslaEtherJitterAggStatsEntry 58 }
ipslaEtherJAggMeasuredFrmLateAs OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that arrived after the timeout."
::= { ipslaEtherJitterAggStatsEntry 59 }
ipslaEtherJAggMeasuredFrmUnPrcds OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames that arrived but could not be
processed due to the internal error."
::= { ipslaEtherJitterAggStatsEntry 60 }
-- Conformance Information
ciscoIpSlaEthernetMIBConform OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIB 2 }
ciscoIpSlaEthernetCompliances OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIBConform 1 }
ciscoIpSlaEthernetMIBGroups OBJECT IDENTIFIER
::= { ciscoIpSlaEthernetMIBConform 2 }
ciscoIpSlaEthernetCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for
(1) Ethernet Jitter operation and statistics"
MODULE -- this module
MANDATORY-GROUPS {
ciscoIpSlaEthernetAutoGroup,
ciscoIpSlaEthernetStatsGroup
}
::= { ciscoIpSlaEthernetCompliances 1 }
ciscoIpSlaEthernetAutoGroup OBJECT-GROUP
OBJECTS {
ipslaEthernetGrpCtrlStatus,
ipslaEthernetGrpCtrlStorageType,
ipslaEthernetGrpCtrlRttType,
ipslaEthernetGrpCtrlOwner,
ipslaEthernetGrpCtrlTag,
ipslaEthernetGrpCtrlThreshold,
ipslaEthernetGrpCtrlTimeout,
ipslaEthernetGrpCtrlProbeList,
ipslaEthernetGrpCtrlVLAN,
ipslaEthernetGrpCtrlDomainNameType,
ipslaEthernetGrpCtrlDomainName,
ipslaEthernetGrpCtrlReqDataSize,
ipslaEthernetGrpCtrlMPIDExLst,
ipslaEthernetGrpCtrlCOS,
ipslaEthernetGrpCtrlInterval,
ipslaEthernetGrpCtrlNumFrames,
ipslaEthernetGrpReactStatus,
ipslaEthernetGrpReactStorageType,
ipslaEthernetGrpReactVar,
ipslaEthernetGrpReactThresholdType,
ipslaEthernetGrpReactThresholdRising,
ipslaEthernetGrpReactThresholdFalling,
ipslaEthernetGrpReactThresholdCountX,
ipslaEthernetGrpReactThresholdCountY,
ipslaEthernetGrpReactActionType,
ipslaEthernetGrpScheduleRttStartTime,
ipslaEthernetGrpSchedulePeriod,
ipslaEthernetGrpScheduleFrequency
}
STATUS current
DESCRIPTION
"A collection of objects that were added to support
Auto-Ethernet-CFM."
::= { ciscoIpSlaEthernetMIBGroups 1 }
ciscoIpSlaEthernetStatsGroup OBJECT-GROUP
OBJECTS {
ipslaEtherJitterLatestNumRTT,
ipslaEtherJitterLatestRTTSum,
ipslaEtherJitterLatestRTTSum2,
ipslaEtherJitterLatestRTTMin,
ipslaEtherJitterLatestRTTMax,
ipslaEtherJitterLatestMinPosSD,
ipslaEtherJitterLatestMaxPosSD,
ipslaEtherJitterLatestNumPosSD,
ipslaEtherJitterLatestSumPosSD,
ipslaEtherJitterLatestSum2PosSD,
ipslaEtherJitterLatestMinNegSD,
ipslaEtherJitterLatestMaxNegSD,
ipslaEtherJitterLatestNumNegSD,
ipslaEtherJitterLatestSumNegSD,
ipslaEtherJitterLatestSum2NegSD,
ipslaEtherJitterLatestMinPosDS,
ipslaEtherJitterLatestMaxPosDS,
ipslaEtherJitterLatestNumPosDS,
ipslaEtherJitterLatestSumPosDS,
ipslaEtherJitterLatestSum2PosDS,
ipslaEtherJitterLatestMinNegDS,
ipslaEtherJitterLatestMaxNegDS,
ipslaEtherJitterLatestNumNegDS,
ipslaEtherJitterLatestSumNegDS,
ipslaEtherJitterLatestSum2NegDS,
ipslaEtherJitterLatestFrmLossSD,
ipslaEtherJitterLatestFrmLossDS,
ipslaEtherJitterLatestFrmOutSeq,
ipslaEtherJitterLatestFrmMIA,
ipslaEtherJitterLatestFrmSkipped,
ipslaEtherJitterLatestSense,
ipslaEtherJitterLatestFrmLateA,
ipslaEtherJitterLatestMinSucFrmL,
ipslaEtherJitterLatestMaxSucFrmL,
ipslaEtherJitterLatestOWSumSD,
ipslaEtherJitterLatestOWSum2SD,
ipslaEtherJitterLatestOWMinSD,
ipslaEtherJitterLatestOWMaxSD,
ipslaEtherJitterLatestOWSumDS,
ipslaEtherJitterLatestOWSum2DS,
ipslaEtherJitterLatestOWMinDS,
ipslaEtherJitterLatestOWMaxDS,
ipslaEtherJitterLatestNumOW,
ipslaEtherJitterLatestAvgJitter,
ipslaEtherJitterLatestAvgSDJ,
ipslaEtherJitterLatestAvgDSJ,
ipslaEtherJitterLatestOWAvgSD,
ipslaEtherJitterLatestOWAvgDS,
ipslaEtherJitterLatestIAJOut,
ipslaEtherJitterLatestIAJIn,
ipslaEtherJLatestFrmUnProcessed,
ipslaEtherJAggMeasuredCmpletions,
ipslaEtherJAggMeasuredOvThrshlds,
ipslaEtherJAggMeasuredNumRTTs,
ipslaEtherJAggMeasuredRTTSums,
ipslaEtherJAggMeasuredRTTSum2Ls,
ipslaEtherJAggMeasuredRTTSum2Hs,
ipslaEtherJAggMeasuredRTTMin,
ipslaEtherJAggMeasuredRTTMax,
ipslaEtherJAggMeasuredMinPosSD,
ipslaEtherJAggMeasuredMaxPosSD,
ipslaEtherJAggMeasuredNumPosSDs,
ipslaEtherJAggMeasuredSumPosSDs,
ipslaEtherJAggMeasuredSum2PSDLs,
ipslaEtherJAggMeasuredSum2PSDHs,
ipslaEtherJAggMeasuredMinNegSD,
ipslaEtherJAggMeasuredMaxNegSD,
ipslaEtherJAggMeasuredNumNegSDs,
ipslaEtherJAggMeasuredSumNegSDs,
ipslaEtherJAggMeasuredSum2NSDLs,
ipslaEtherJAggMeasuredSum2NSDHs,
ipslaEtherJAggMeasuredMinPosDS,
ipslaEtherJAggMeasuredMaxPosDS,
ipslaEtherJAggMeasuredNumPosDSes,
ipslaEtherJAggMeasuredSumPosDSes,
ipslaEtherJAggMeasuredSum2PDSLs,
ipslaEtherJAggMeasuredSum2PDSHs,
ipslaEtherJAggMeasuredMinNegDS,
ipslaEtherJAggMeasuredMaxNegDS,
ipslaEtherJAggMeasuredNumNegDSes,
ipslaEtherJAggMeasuredSumNegDSes,
ipslaEtherJAggMeasuredSum2NDSLs,
ipslaEtherJAggMeasuredSum2NDSHs,
ipslaEtherJAggMeasuredFrmLossSDs,
ipslaEtherJAggMeasuredFrmLssDSes,
ipslaEtherJAggMeasuredFrmOutSeqs,
ipslaEtherJAggMeasuredFrmMIAes,
ipslaEtherJAggMeasuredFrmSkippds,
ipslaEtherJAggMeasuredErrors,
ipslaEtherJAggMeasuredBusies,
ipslaEtherJAggMeasuredOWSumSDs,
ipslaEtherJAggMeasuredOWSum2SDLs,
ipslaEtherJAggMeasuredOWSum2SDHs,
ipslaEtherJAggMeasuredOWMinSD,
ipslaEtherJAggMeasuredOWMaxSD,
ipslaEtherJAggMeasuredOWSumDSes,
ipslaEtherJAggMeasuredOWSum2DSLs,
ipslaEtherJAggMeasuredOWSum2DSHs,
ipslaEtherJAggMeasuredOWMinDS,
ipslaEtherJAggMeasuredOWMaxDS,
ipslaEtherJAggMeasuredNumOWs,
ipslaEtherJAggMeasuredAvgJ,
ipslaEtherJAggMeasuredAvgJSD,
ipslaEtherJAggMeasuredAvgJDS,
ipslaEtherJAggMinSucFrmLoss,
ipslaEtherJAggMaxSucFrmLoss,
ipslaEtherJAggMeasuredIAJOut,
ipslaEtherJAggMeasuredIAJIn,
ipslaEtherJAggMeasuredFrmLateAs,
ipslaEtherJAggMeasuredFrmUnPrcds
}
STATUS current
DESCRIPTION
"A collection of statistics objects related to
Ethernet Jitter Probe."
::= { ciscoIpSlaEthernetMIBGroups 2 }
END
Reference in New Issue View Git Blame Copy Permalink