MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-IPSLA-AUTOMEASURE-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

984 lines
36 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-IPSLA-AUTOMEASURE-MIB.my: IP SLA Auto Measure MIB
--
-- January 2007, Katherine Yang
--
-- Copyright (c) 2007 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-IPSLA-AUTOMEASURE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
StorageType,
TruthValue,
RowStatus
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddress,
InetAddressType,
InetPortNumber
FROM INET-ADDRESS-MIB
IpSlaOperType,
IpSlaReactVar
FROM CISCO-IPSLA-TC-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoIpSlaAutoMIB MODULE-IDENTITY
LAST-UPDATED "200706130000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems, Inc.
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553 NETS
Email: cs-ipsla@cisco.com"
DESCRIPTION
"This module defines the MIB for IP SLA Automation. IP SLA
Automation consists of the following:
1. Use of grouping - Group is an aggregation of operations
sharing the same type, for example UDP jitter type, with
common characteristics like frequency, interval etc.
Groups are formed by policies dictated either per customer,
or by service level or any other requirements. So, for
example, there could be separate groups for customers named
Customer A, Customer B etc, or service levels named
Gold-service, Silver-service etc. A single group will contain
one and only one IP SLA operation definition or reference a
single template.
2. Use of templates - It has been observed that operations can be
configured quickly if the variants such as IP address and
ports can be configured separately and then combined with a
template consisting of invariants. This allows for re-use of
the invariant template with various combinations of destination
addresses and ports, the benefits for which are multiplied when
considering groupings.
3. Auto operations - With this feature the software will try to
automatically kickstart operations by making intelligent
assumptions. For example, if no specific operation is referenced
by the group configuration then an ICMP jitter operation is
assumed by default."
REVISION "200706130000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 633 }
ciscoIpSlaAutoMIBNotifs OBJECT IDENTIFIER
::= { ciscoIpSlaAutoMIB 0 }
ciscoIpSlaAutoMIBObjects OBJECT IDENTIFIER
::= { ciscoIpSlaAutoMIB 1 }
cipslaAutoGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CipslaAutoGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains IP SLA auto measure group definitions."
::= { ciscoIpSlaAutoMIBObjects 1 }
cipslaAutoGroupEntry OBJECT-TYPE
SYNTAX CipslaAutoGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the configurations for a particular
auto measure group."
INDEX { cipslaAutoGroupName }
::= { cipslaAutoGroupTable 1 }
CipslaAutoGroupEntry ::= SEQUENCE {
cipslaAutoGroupName SnmpAdminString,
cipslaAutoGroupDescription SnmpAdminString,
cipslaAutoGroupDestinationName SnmpAdminString,
cipslaAutoGroupADDestPort InetPortNumber,
cipslaAutoGroupOperTemplateName SnmpAdminString,
cipslaAutoGroupSchedulerId SnmpAdminString,
cipslaAutoGroupQoSEnable TruthValue,
cipslaAutoGroupOperType IpSlaOperType,
cipslaAutoGroupDestIPADEnable TruthValue,
cipslaAutoGroupADMeasureRetry Unsigned32,
cipslaAutoGroupADDestIPAgeout Unsigned32,
cipslaAutoGroupStorageType StorageType,
cipslaAutoGroupRowStatus RowStatus
}
cipslaAutoGroupName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A group name which is used by a management application
to identify the group."
::= { cipslaAutoGroupEntry 1 }
cipslaAutoGroupDescription OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..128))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is used to provide description for the group."
DEFVAL { "" }
::= { cipslaAutoGroupEntry 2 }
cipslaAutoGroupDestinationName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object refers to the cipslaAutoGroupDestName
in cipslaAutoGroupDestTable. If the name entered
is not present in cipslaAutoGroupDestTable, then when
group is scheduled, no ip sla operations will be created."
DEFVAL { "" }
::= { cipslaAutoGroupEntry 3 }
cipslaAutoGroupADDestPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the destination port number
for auto discovery use."
DEFVAL { 0 }
::= { cipslaAutoGroupEntry 4 }
cipslaAutoGroupOperTemplateName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string which is used by a management application to
identify the template which is associated with the group.
Depends on cipslaAutoGroupOperType, this object refers to
cipslaIcmpEchoTmplName in cipslaIcmpEchoTmplTable, or
cipslaUdpEchoTmplName in cipslaUdpEchoTmplTable, or
cipslaTcpConnTmplName in cipslaTcpConnTmplTable, or
cipslaIcmpJitterTmplName in cipslaIcmpJitterTmplTable, or
ciscoIpSlaUdpJitterTmplName in ciscoIpSlaUdpJitterTmplTable."
::= { cipslaAutoGroupEntry 5 }
cipslaAutoGroupSchedulerId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object refers to the cipslaAutoGroupSchedId in
cipslaAutoGroupSchedTable, and is used to schedule
this group."
DEFVAL { "" }
::= { cipslaAutoGroupEntry 6 }
cipslaAutoGroupQoSEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this object is set to true, QoS is enabled for this
group and this group is linked to policy map. The
restriction is that after QoS is enabled, it can not be
disabled for this group."
DEFVAL { false }
::= { cipslaAutoGroupEntry 7 }
cipslaAutoGroupOperType OBJECT-TYPE
SYNTAX IpSlaOperType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of IP SLA operation.
When operation type is not ICMP jitter, then
cipslaAutoGroupOperTemplateName must be specified."
::= { cipslaAutoGroupEntry 8 }
cipslaAutoGroupDestIPADEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When this object is set to true, destination IP address
is populated through auto-discovery."
DEFVAL { false }
::= { cipslaAutoGroupEntry 9 }
cipslaAutoGroupADMeasureRetry OBJECT-TYPE
SYNTAX Unsigned32 (1..65536 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies number of measurement retries to
be attempted for the discovered end point after the
connection to the end point is broken. If there is no
re-registration message received, the end point will be
in inactive state.
When the value of cipslaAutoGroupDestIPADEnable is
'false', the value of this object has no effect."
DEFVAL { 3 }
::= { cipslaAutoGroupEntry 10 }
cipslaAutoGroupADDestIPAgeout OBJECT-TYPE
SYNTAX Unsigned32 (0..65536 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the ageout time for the discovered
end point. If the end point becomes inactive for the period
of ageout time, the end point will be removed from the
discovered end point list.
When the value of cipslaAutoGroupDestIPADEnable is
'false', the value of this object has no effect."
DEFVAL { 3600 }
::= { cipslaAutoGroupEntry 11 }
cipslaAutoGroupStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type of this conceptual row."
DEFVAL { nonVolatile }
::= { cipslaAutoGroupEntry 12 }
cipslaAutoGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual group control row.
When the status is active, the other writable objects
may be modified unless the scheduler with name
specified by cipslaAutoGroupSchedulerId is scheduled."
::= { cipslaAutoGroupEntry 13 }
cipslaAutoGroupDestTable OBJECT-TYPE
SYNTAX SEQUENCE OF CipslaAutoGroupDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table contains the list of destination IP
addresses and ports associated to the auto measure
group destination name."
::= { ciscoIpSlaAutoMIBObjects 2 }
cipslaAutoGroupDestEntry OBJECT-TYPE
SYNTAX CipslaAutoGroupDestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the destination IP addresses
and port configurations associated to auto measure
group destination name."
INDEX {
cipslaAutoGroupDestName,
cipslaAutoGroupDestIpAddrType,
cipslaAutoGroupDestIpAddr,
cipslaAutoGroupDestPort
}
::= { cipslaAutoGroupDestTable 1 }
CipslaAutoGroupDestEntry ::= SEQUENCE {
cipslaAutoGroupDestName SnmpAdminString,
cipslaAutoGroupDestIpAddrType InetAddressType,
cipslaAutoGroupDestIpAddr InetAddress,
cipslaAutoGroupDestPort InetPortNumber,
cipslaAutoGroupDestStorageType StorageType,
cipslaAutoGroupDestRowStatus RowStatus
}
cipslaAutoGroupDestName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the name for an auto measure group destination."
::= { cipslaAutoGroupDestEntry 1 }
cipslaAutoGroupDestIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the internet address of a destination
for an auto measure group."
::= { cipslaAutoGroupDestEntry 2 }
cipslaAutoGroupDestIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The internet address of a destination for an auto
measure group. The type of this address is determined
by the value of cipslaAutoGroupDestIpAddrType."
::= { cipslaAutoGroupDestEntry 3 }
cipslaAutoGroupDestPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the destination port number.
For ICMP echo and ICMP jitter, the suggested value is
'0'."
::= { cipslaAutoGroupDestEntry 4 }
cipslaAutoGroupDestStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type of this conceptual row.
By default the entry will be saved into non-volatile
memory."
DEFVAL { nonVolatile }
::= { cipslaAutoGroupDestEntry 5 }
cipslaAutoGroupDestRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual destination table control row.
No other objects in this row need to be set before this object
can become active.
During 'destroy', when cipslaAutoGroupDestIpAddr is specified
as '0.0.0.0' and cipslaAutoGroupDestPort is specified as '0',
then all the rows with same cipslaAutoGroupDestName will be
deleted."
::= { cipslaAutoGroupDestEntry 6 }
cipslaReactTable OBJECT-TYPE
SYNTAX SEQUENCE OF CipslaReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains reaction configurations for templates.
Each conceptual row in cipslaReactTable corresponds
to a reaction configured for one template.
Each template can have multiple reactions and hence there can be
multiple rows for a particular template. Different template
types can have different reactions. The reaction type is
specified as cipslaReactVar based upon template type as some
reaction types are applicable just for specific template types."
::= { ciscoIpSlaAutoMIBObjects 3 }
cipslaReactEntry OBJECT-TYPE
SYNTAX CipslaReactEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A base list of objects that define a conceptual reaction
configuration control row."
INDEX {
cipslaAutoGroupOperType,
cipslaReactConfigIndex,
cipslaAutoGroupOperTemplateName
}
::= { cipslaReactTable 1 }
CipslaReactEntry ::= SEQUENCE {
cipslaReactConfigIndex Unsigned32,
cipslaReactVar IpSlaReactVar,
cipslaReactThresholdType INTEGER ,
cipslaReactActionType INTEGER ,
cipslaReactThresholdRising Unsigned32,
cipslaReactThresholdFalling Unsigned32,
cipslaReactThresholdCountX Unsigned32,
cipslaReactThresholdCountY Unsigned32,
cipslaReactStorageType StorageType,
cipslaReactRowStatus RowStatus
}
cipslaReactConfigIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object along with cipslaAutoGroupOperType and
cipslaAutoGroupOperTemplateName identifies
a particular reaction-configuration for one IP SLA
template.
This number is persistent across reboots."
::= { cipslaReactEntry 1 }
cipslaReactVar OBJECT-TYPE
SYNTAX IpSlaReactVar
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of reaction configured for an
IP SLA template. Default value is 'rtt' for ICMP echo, UDP echo
and TCP connect. Default value is 'jitterAvg' for UDP jitter and
ICMP jitter.
The reaction types 'rtt', 'timeout', 'connectionLoss' and
'verifyError' can be configured for all template types.
The reaction types 'jitterSDAvg', 'jitterDSAvg', 'jitterAvg',
'packetLateArrival', 'packetOutOfSequence',
'maxOfPositiveSD', 'maxOfNegativeSD', 'maxOfPositiveDS'
'maxOfNegativeDS', 'mos' and 'icpif' can be configured for
UDP jitter and ICMP jitter types only.
The reaction types 'packetLossDS', 'packetLossSD' and
'packetMIA' can be configured for UDP jitter type only.
The reaction types 'successivePacketLoss', 'maxOfLatencyDS',
'maxOfLatencySD', 'latencyDSAvg', 'latencySDAvg' and
'packetLoss' can be configured for ICMP jitter type only."
::= { cipslaReactEntry 2 }
cipslaReactThresholdType OBJECT-TYPE
SYNTAX INTEGER {
never(1),
immediate(2),
consecutive(3),
xOfy(4),
average(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the conditions under which
a notification ( trap ) is sent. The rttMonReactOccurred
object defined in rttMonReactTable in CISCO-RTTMON-MIB will
change accordingly:
never(1) - rttMonReactOccurred is never set
immediate(2) - rttMonReactOccurred is set to 'true' when the
value of parameter for which reaction is
configured ( e.g rtt, jitterAvg, packetLossSD,
mos etc ) violates the threshold.
Conversely, rttMonReactOccurred is set to 'false'
when the parameter ( e.g rtt, jitterAvg,
packetLossSD, mos etc ) is below the threshold
limits.
consecutive(3) - rttMonReactOccurred is set to true when the value
of parameter for which reaction is configured
( e.g rtt, jitterAvg, packetLossSD, mos etc )
violates the threshold for configured consecutive
times.
Conversely, rttMonReactOccurred is set to false
when the value of parameter ( e.g rtt, jitterAvg
packetLossSD, mos etc ) is below the threshold
limits for the same number of consecutive
operations.
xOfy(4) - rttMonReactOccurred is set to true when x
( as specified by cipslaReactThresholdCountX )
out of the last y ( as specified by
cipslaReacthresholdCountY ) times the value of
parameter for which the reaction is configured
( e.g rtt, jitterAvg, packetLossSD, mos etc )
violates the threshold.
Conversely, it is set to false when x, out of the
last y times the value of parameter
( e.g rtt, jitterAvg, packetLossSD, mos ) is
below the threshold limits.
NOTE: If x > y, this will never
generate a reaction.
average(5) - rttMonReactOccurred is set to true when the
average ( cipslaReactThresholdCountX times )
value of parameter for which reaction is
configured ( e.g rtt, jitterAvg, packetLossSD,
mos etc ) violates the threshold condition.
Conversely, it is set to false when the
average value of parameter ( e.g rtt, jitterAvg,
packetLossSD, mos etc ) is below the threshold
limits.
If this value is changed by a management station,
rttMonReactOccurred is set to false, but
no reaction is generated if the prior value of
rttMonReactOccurred was true."
DEFVAL { never }
::= { cipslaReactEntry 3 }
cipslaReactActionType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
notificationOnly(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies what type, if any, of reaction to
generate if one of the watched
(reaction-configuration ) conditions is satisfied:
none(1) - no reaction is generated
notificationOnly(2) - a notification is generated"
DEFVAL { none }
::= { cipslaReactEntry 4 }
cipslaReactThresholdRising OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the higher threshold limit.
If the value ( e.g rtt, jitterAvg, packetLossSD etc ) rises
above this limit and if the condition specified in
cipslaReactThresholdType is satisfied, a notification is
generated.
Default value of cipslaReactThresholdRising for
'rtt' is 5000
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' 100.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'mos' is 500.
'icpif' is 93.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'successivePacketLoss' is 1000.
'maxOfLatencyDS' is 5000.
'maxOfLatencySD' is 5000.
'latencyDSAvg' is 5000.
'latencySDAvg' is 5000.
'packetLoss' is 10000.
This object is not applicable if the cipslaReactVar is
'timeout', 'connectionLoss' or 'verifyError'. For 'timeout',
'connectionLoss' and 'verifyError' default value of
cipslaReactThresholdRising will be 0."
::= { cipslaReactEntry 5 }
cipslaReactThresholdFalling OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines a lower threshold limit. If the
value ( e.g rtt, jitterAvg, packetLossSD etc ) falls
below this limit and if the condition specified in
cipslaReactThresholdType is satisfied, a notification
is generated. This object value can not bigger than
cipslaReactThresholdRising value.
Default value of cipslaReactThresholdFalling
'rtt' is 3000
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' 100.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'mos' is 500.
'icpif' is 93.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'successivePacketLoss' is 1000.
'maxOfLatencyDS' is 3000.
'maxOfLatencySD' is 3000.
'latencyDSAvg' is 3000.
'latencySDAvg' is 3000.
'packetLoss' is 10000.
This object is not applicable if the cipslaReactVar is
'timeout', 'connectionLoss' or 'verifyError'. For 'timeout',
'connectionLoss' and 'verifyError', default value of
cipslaReactThresholdFalling will be 0."
::= { cipslaReactEntry 6 }
cipslaReactThresholdCountX OBJECT-TYPE
SYNTAX Unsigned32 (1..16 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If cipslaReactThresholdType value is 'xOfy', this object
defines the 'x' value.
If cipslaReactThresholdType value is 'consecutive'
this object defines the number of consecutive occurrences
that needs threshold violation before setting
cipslaReactOccurred as true.
If cipslaReactThresholdType value is 'average' this object
defines the number of samples that needs be considered for
calculating average.
This object has no meaning if cipslaReactThresholdType has
value of 'never' and 'immediate'."
DEFVAL { 5 }
::= { cipslaReactEntry 7 }
cipslaReactThresholdCountY OBJECT-TYPE
SYNTAX Unsigned32 (1..16 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object defines the 'y' value of the xOfy condition
if cipslaReactThresholdType is 'xOfy'. The default for the
'y' value is 5.
For other values of cipslaReactThresholdType, this object
is not applicable."
::= { cipslaReactEntry 8 }
cipslaReactStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type of this conceptual row.
By default the entry will be saved into non-volatile
memory."
DEFVAL { nonVolatile }
::= { cipslaReactEntry 9 }
cipslaReactRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This objects indicates the status of the conceptual
Reaction Control Row.
When this object moves to active state, the conceptual row
is monitored and notifications are generated when threshold
violation takes place.
In order for this object to become active cipslaReactVar must
be defined. All other objects assume default values. When the
status is active, the following objects in that row can be
modified.
cipslaReactThresholdType,
cipslaReactActionType,
cipslaReactThresholdRising,
cipslaReactThresholdFalling,
cipslaReactThresholdCountX,
cipslaReactThresholdCountY,
cipslaReactStorageType
This object can be set to 'destroy' from any value at any time.
When this object is set to 'destroy' no reaction configuration
would exist. The reaction configuration for the template is
removed."
::= { cipslaReactEntry 10 }
cipslaAutoGroupSchedTable OBJECT-TYPE
SYNTAX SEQUENCE OF CipslaAutoGroupSchedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of group scheduling definitions."
::= { ciscoIpSlaAutoMIBObjects 4 }
cipslaAutoGroupSchedEntry OBJECT-TYPE
SYNTAX CipslaAutoGroupSchedEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that define specific configuration for
group scheduling."
INDEX { cipslaAutoGroupSchedId }
::= { cipslaAutoGroupSchedTable 1 }
CipslaAutoGroupSchedEntry ::= SEQUENCE {
cipslaAutoGroupSchedId SnmpAdminString,
cipslaAutoGroupSchedPeriod Unsigned32,
cipslaAutoGroupSchedInterval Unsigned32,
cipslaAutoGroupSchedLife Unsigned32,
cipslaAutoGroupSchedAgeout Unsigned32,
cipslaAutoGroupSchedMaxInterval Unsigned32,
cipslaAutoGroupSchedMinInterval Unsigned32,
cipslaAutoGroupSchedStartTime Unsigned32,
cipslaAutoGroupSchedStorageType StorageType,
cipslaAutoGroupSchedRowStatus RowStatus
}
cipslaAutoGroupSchedId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This string uniquely identifies a row in the
cipslaAutoGroupSchedTable."
::= { cipslaAutoGroupSchedEntry 1 }
cipslaAutoGroupSchedPeriod OBJECT-TYPE
SYNTAX Unsigned32 (100..99000 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the time duration between initiating two
IP SLA operations generated via the auto measure group."
DEFVAL { 1000 }
::= { cipslaAutoGroupSchedEntry 2 }
cipslaAutoGroupSchedInterval OBJECT-TYPE
SYNTAX Unsigned32 (1..604800 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the duration between initiating each RTT
operation for one IP SLA operation generated via the auto
measure group.
The value of this object is only effective when both
cipslaAutoGroupSchedMaxInterval and
cipslaAutoGroupSchedMinInterval have zero values."
DEFVAL { 60 }
::= { cipslaAutoGroupSchedEntry 3 }
cipslaAutoGroupSchedLife OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the life of all the operations that are
getting group scheduled. This value will be placed into
cipslaAutoGroupSchedRttLife object when this conceptual control
row becomes 'active'.
The value 2147483647 has a special meaning. When this object is
set to 2147483647, the rttMonCtrlOperRttLife object for all the
operations will not decrement, and thus the life time of the
operation will never end."
DEFVAL { 3600 }
::= { cipslaAutoGroupSchedEntry 4 }
cipslaAutoGroupSchedAgeout OBJECT-TYPE
SYNTAX Unsigned32 (0..2073600 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the ageout value of the operations that are
getting group scheduled. This value will be placed into
rttMonSchedAdminConceptRowAgeout object for each of the
operations in the group when this conceptual control row becomes
'active'.
When this value is set to zero, the operations will never ageout."
DEFVAL { 3600 }
::= { cipslaAutoGroupSchedEntry 5 }
cipslaAutoGroupSchedMaxInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..604800 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the max duration between initiating each RTT
operation for one IP SLA operation in the group."
DEFVAL { 0 }
::= { cipslaAutoGroupSchedEntry 6 }
cipslaAutoGroupSchedMinInterval OBJECT-TYPE
SYNTAX Unsigned32 (0..604800 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies the min duration between initiating each RTT
operation for one IP SLA operation in the group.
The value of this object should be lower than the value of
cipslaAutoGroupSchedMaxInterval."
DEFVAL { 0 }
::= { cipslaAutoGroupSchedEntry 7 }
cipslaAutoGroupSchedStartTime OBJECT-TYPE
SYNTAX Unsigned32 (0..604800 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the time in seconds after which the operations of
the associated groups will take transition to active state.
When set to the value other than '1' (pending), then all
objects in this row cannot be modified."
DEFVAL { 1 }
::= { cipslaAutoGroupSchedEntry 8 }
cipslaAutoGroupSchedStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type of this conceptual row.
By default the entry will be saved into non-volatile
memory."
DEFVAL { nonVolatile }
::= { cipslaAutoGroupSchedEntry 9 }
cipslaAutoGroupSchedRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of the conceptual group schedule control row.
When the status is active and the value of
cipslaAutoGroupSchedStartTime is '1', the other writable
objects may be modified.
This object can be set to 'destroy' from any value at any time.
When this object is set to 'destroy' it will stop all the
operations which had been group scheduled by it earlier,
before destroying the group schedule control row."
::= { cipslaAutoGroupSchedEntry 10 }
-- Conformance Information
ciscoIpSlaAutoMIBConform OBJECT IDENTIFIER
::= { ciscoIpSlaAutoMIB 2 }
ciscoIpSlaAutoMIBCompliances OBJECT IDENTIFIER
::= { ciscoIpSlaAutoMIBConform 1 }
ciscoIpSlaAutoMIBGroups OBJECT IDENTIFIER
::= { ciscoIpSlaAutoMIBConform 2 }
ciscoIpSlaAutoMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for IP SLA
(1) Auto Measure Group Table
(2) Destination Table
(3) Reaction Table
(4) Group Schedule Table"
MODULE -- this module
MANDATORY-GROUPS {
ciscoIpSlaAutoGroupConfGroup,
ciscoIpSlaAutoGroupDestGroup,
ciscoIpSlaAutoGroupReactGroup,
ciscoIpSlaAutoGroupSchedGroup
}
::= { ciscoIpSlaAutoMIBCompliances 1 }
ciscoIpSlaAutoGroupConfGroup OBJECT-GROUP
OBJECTS {
cipslaAutoGroupDescription,
cipslaAutoGroupDestinationName,
cipslaAutoGroupADDestPort,
cipslaAutoGroupOperTemplateName,
cipslaAutoGroupSchedulerId,
cipslaAutoGroupQoSEnable,
cipslaAutoGroupOperType,
cipslaAutoGroupDestIPADEnable,
cipslaAutoGroupADMeasureRetry,
cipslaAutoGroupADDestIPAgeout,
cipslaAutoGroupStorageType,
cipslaAutoGroupRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects related to IP SLA auto meaure group
configuration."
::= { ciscoIpSlaAutoMIBGroups 1 }
ciscoIpSlaAutoGroupDestGroup OBJECT-GROUP
OBJECTS {
cipslaAutoGroupDestStorageType,
cipslaAutoGroupDestRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects related to IP SLA auto measure
group destination configuration."
::= { ciscoIpSlaAutoMIBGroups 2 }
ciscoIpSlaAutoGroupReactGroup OBJECT-GROUP
OBJECTS {
cipslaReactVar,
cipslaReactThresholdType,
cipslaReactActionType,
cipslaReactThresholdRising,
cipslaReactThresholdFalling,
cipslaReactThresholdCountX,
cipslaReactThresholdCountY,
cipslaReactStorageType,
cipslaReactRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects related to IP SLA auto measure
reaction configuration."
::= { ciscoIpSlaAutoMIBGroups 3 }
ciscoIpSlaAutoGroupSchedGroup OBJECT-GROUP
OBJECTS {
cipslaAutoGroupSchedPeriod,
cipslaAutoGroupSchedInterval,
cipslaAutoGroupSchedLife,
cipslaAutoGroupSchedAgeout,
cipslaAutoGroupSchedMaxInterval,
cipslaAutoGroupSchedMinInterval,
cipslaAutoGroupSchedStartTime,
cipslaAutoGroupSchedStorageType,
cipslaAutoGroupSchedRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects related to IP SLA auto measure group
schedule configuration."
::= { ciscoIpSlaAutoMIBGroups 4 }
END
Reference in New Issue View Git Blame Copy Permalink