MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-FC-ROUTE-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

722 lines
28 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-FC-ROUTE-MIB.my: Fibre Channel Route Mib
--
-- September 2002, Srini Kode
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-FC-ROUTE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Counter64 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
RowStatus, TruthValue,TimeStamp,
TestAndIncr FROM SNMPv2-TC
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
InterfaceIndex FROM IF-MIB
ciscoMgmt FROM CISCO-SMI
FcAddressId,VsanIndex FROM CISCO-ST-TC
vsanIndex FROM CISCO-VSAN-MIB
entPhysicalIndex,PhysicalIndex FROM ENTITY-MIB;
ciscoFcRouteMIB MODULE-IDENTITY
LAST-UPDATED "200309040000Z"
ORGANIZATION "Cisco Systems Inc. "
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"The MIB module for configuring and displaying FC (Fibre
Channel) Route Information."
REVISION "200309040000Z"
DESCRIPTION
"Updated fcRouteDomainId & fcRouteMetric range and added
compliance statement for fcRouteDomainId and
fcRouteMetric."
REVISION "200211010000Z"
DESCRIPTION
"Updated fcRouteProto. "
REVISION "200210020000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 284 }
ciscoFcRouteMIBObjects OBJECT IDENTIFIER
::= { ciscoFcRouteMIB 1 }
fcRouteMIBConformance OBJECT IDENTIFIER
::= { ciscoFcRouteMIB 2 }
fcRouteConfig OBJECT IDENTIFIER
::= { ciscoFcRouteMIBObjects 1 }
fcRouteStatistics OBJECT IDENTIFIER
::= { ciscoFcRouteMIBObjects 2 }
fcRouteNotification OBJECT IDENTIFIER
::= { ciscoFcRouteMIBObjects 3 }
fcRouteNotifications OBJECT IDENTIFIER
::= { fcRouteNotification 0 }
fcRouteLastChangeTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the most recent time when a
conceptual row was created, modified, or deleted in
fcRouteTable.
If no change has occurred since the last restart of the
management system, then the value of this object is 0. "
::= { fcRouteConfig 1 }
fcRoutePreference OBJECT-TYPE
SYNTAX Unsigned32 (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of route preference.Route preference is the
value used to select one route over other when more than
one route to the same destination is learned from
different protocols, peers, or static routes from
end-users. The preference value is an arbitrary assigned
value used to determine the order of routes to the same
destination in a single routing database(RIB). The
active route is chosen by the lowest preference value. "
::= { fcRouteConfig 2 }
fcRouteVerifyAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
verify(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to perform a consistency check of
fcRouteTable.
none (1) - no action
verify (2) - perform verify action
Writing verify(2) does a consistency check
of the fcRouteTable with either one of the following:
- with routeTable in the persistent database if the
fcRouteVerifyType value is pss(1)
- with forwarding information base software tables on
the module specified by fcRouteVerifyModule, if the
fcRouteVerifyType value is fibShadow(2).
- with forwarding information base hardware tables on
the module specified by fcRouteVerifyModule if the
fcRouteVerifyType value is fibHardware(3).
This verify action is performed on the fcRouteTable for
the VSAN specified by fcRouteVerifyVsanID and for the
route entries of the type specified by
fcRouteVerifyRouteType.
The result is shown by fcRouteVerifyResult.
If a verify, due to a previous action performed, is in
progress in the agent, then setting the
fcRouteVerifyAction to verify(2) again will fail.
No verification is performed if the value is set to
none(1).
When read, this object always has the value 'none(1)'. "
DEFVAL { none }
::= { fcRouteConfig 3 }
fcRouteVerifyType OBJECT-TYPE
SYNTAX INTEGER {
pss(1),
fibShadow(2),
fibHardware(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by fcRouteVerifyAction to perform the
consistency check of fcRouteTable with:
- route table in persistent database if value is pss(1)
- forwarding information base software tables if value
is fibShadow(2)
- forwarding information base hardware tables if value
is fibHardware(3). "
DEFVAL { fibHardware }
::= { fcRouteConfig 4 }
fcRouteVerifyModule OBJECT-TYPE
SYNTAX PhysicalIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This value identifies a particular line card module
according to that module's value of entPhysicalIndex in
the entPhysicalTable of the ENTITY-MIB (RFC 2737).
The forwarding information base present on this module
is checked for consistency with the fcRouteTable.
The value of this object is relevant only if
fcRouteVerifyType is either fibShadow(2) or
fibHardware(3). "
::= { fcRouteConfig 5 }
fcRouteVerifyVsanID OBJECT-TYPE
SYNTAX VsanIndex (1..4093)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value specifies the VSAN id. The fcRouteTable
entries and the entries in the table specified by
fcRouteVerifyType is checked for consistency for the
same VSAN id specified by this object. "
::= { fcRouteConfig 6 }
fcRouteVerifyRouteType OBJECT-TYPE
SYNTAX INTEGER {
unicast(1),
multicast(2),
label(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value used by fcRouteVerifyAction to perform the
consistency check of fcRouteTable. If the value is
unicast(1) then only unicast entries in fcRouteTable
and the entries in the table specified by
fcRouteVerifyType are checked. If value is multicast(2)
then only multicast entries in fcRouteTable and the
entries in the table specified by fcRouteVerifyType are
checked. If value is label(3) then only label entries
in fcRouteTable and the entries in the table specified
by fcRouteVerifyType are checked. "
DEFVAL { unicast }
::= { fcRouteConfig 7 }
fcRouteVerifyResult OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The object displays the details of the first
inconsistency that occured from the check. If the check
passes successfully then this will be a zero-length
string. "
::= { fcRouteConfig 8 }
fcRouteVerifyLock OBJECT-TYPE
SYNTAX TestAndIncr
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to facilitate the verify action
performed using 'fcRouteVerifyAction' by multiple
managers.
The procedure to perform the action by the NMS is as
follows:
1. Retrieve the value of fcRouteVerifyLock.
2. Set the value of fcRouteVerifyLock to the retrieved
value, and in the same PDU provide the following
values:
fcRouteVerifyAction to 'verify(2)'
fcRouteVerifyType,fcRouteVerifyVsanID,
fcRouteVerifyRouteType and fcRouteVerifyModule.
Note, fcRouteVerifyModule is relevent only if
fcRouteVerifyType is either 'fibShadow(2)' or
fibHardware(3).
3. If the set fails repeat steps 1-2.
4. Retrieve the value of fcRouteVerifyLock and
fcRouteVerifyResult in the same pdu.
5. If 'fcRouteVerifyLock' value is not one greater than
the retrieved value of 'fcRouteVerifyLock' in step-1
than repeat steps 1-4. "
::= { fcRouteConfig 9 }
-- Fibre Channel Routing table
fcRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local system's Fibre Channel Routing table.
This table lists all the routes that is configured/
calculated at the local system.
Traffic through the TL-Port (translation port) uses the
R-CTL field in the FC protocol header. During forwarding,
this R-CTL field is part of the the value looked-up in
the route table for matching.
The value of the object fcRoutePreference is used to
select one route over other when more than one route to
the same destination is learned from different protocols,
peers, or static routes from end-users.
Only the entries configured by the user, which are
fcRouteProto of type netmgmt(3), can be deleted by the
user. "
::= { fcRouteConfig 10 }
fcRouteEntry OBJECT-TYPE
SYNTAX FcRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains a route to a particular destination
in a particular VSAN via a particular output interface,
and learned in a particular manner. "
INDEX { vsanIndex, fcRouteDestAddrId,fcRouteDestMask,
fcRouteProto,fcRouteInterface }
::= { fcRouteTable 1 }
FcRouteEntry ::=
SEQUENCE {
fcRouteDestAddrId FcAddressId,
fcRouteDestMask FcAddressId,
fcRouteProto INTEGER,
fcRouteInterface InterfaceIndex,
fcRouteDomainId Unsigned32,
fcRouteMetric Unsigned32,
fcRouteType INTEGER,
fcRoutePermanent TruthValue,
fcRouteRowStatus RowStatus
}
fcRouteDestAddrId OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination FC-ID of this route. "
::= { fcRouteEntry 1 }
fcRouteDestMask OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicate the mask to be logical-ANDed with the
destination address Id before being compared to the value
in the fcRouteDestAddrId field.
This can only be 255.255.255 or 255.255.0 or 255.0.0 . "
::= { fcRouteEntry 2 }
fcRouteProto OBJECT-TYPE
SYNTAX INTEGER {
other (1),
local (2),
netmgmt (3),
fspf (4),
mpls (5),
multicast (6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The routing mechanism via which this route was learned.
other(1) - not specified
local(2) - local interface
netmgmt(3)- static route
The following are all dynamic routing protocols
fspf(4) - Fibre Shortest Path First
mpls(5) - Multiple Protocol Label Switching.
multicast(6) - multicast routes."
::= { fcRouteEntry 3 }
fcRouteInterface OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value, which identifies the local interface
through which the next hop of this route should be
reached. If the interface type is TL-Port then R-CTL
field in the FC protocol header is also used for
look-up in the route table during forwarding.
Only interfaces of type Fibre Channel and Port Channel
are allowed. "
::= { fcRouteEntry 4 }
fcRouteDomainId OBJECT-TYPE
SYNTAX Unsigned32 (0..239)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The domain ID of next hop switch.
However this object, when read, could have a value zero
if value of fcRouteProto is 'local'."
::= { fcRouteEntry 5 }
fcRouteMetric OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing metric for this route.
The use of this object is dependent on fcRouteProto
used. "
::= { fcRouteEntry 6 }
fcRouteType OBJECT-TYPE
SYNTAX INTEGER {
local(1),
remote(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of route.
local(1): refers to a route for which the next hop is
the final destination;
remote(2): refers to a route for which the next hop is
not the final destination.
This object is not relevent for multicast and broadcast
route entries. "
DEFVAL {local}
::= { fcRouteEntry 7 }
fcRoutePermanent OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value if true(1), indicates the route is not to be
removed from the relevant Forwarding information base
even if the port is operationally 'down'. If false(2),
the route is removed from the relevant Forwarding
information base (FIB) if the port is operationally
'down'.
This object is not relevent for multicast and broadcast
route entries. "
DEFVAL {true}
::= { fcRouteEntry 8 }
fcRouteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. "
::= { fcRouteEntry 9 }
-- Flow Statistics Table
fcRouteFlowStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcRouteFlowStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to configure and show the ingress traffic
counters on physical components (e.g., Linecards).
The user has the option of configuring counters
depending on the bits selected for the object
fcRouteFlowType. If the user selects only vsanId(0)
bit for all the entries, then no more than 1024 entries
can be created. If the user selects all the 4 bits,
vsanId(0), destId(1), srcId(2), port(3), for some
entries, then additional entries can be created, up to
a maximum of 2048 entries.
For statistics collection R-CTL is not part of the
the value looked-up in the route table, so the counters
are updated immaterial of R-CTL field. "
::= { fcRouteStatistics 1 }
fcRouteFlowStatEntry OBJECT-TYPE
SYNTAX FcRouteFlowStatEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry provides information on the ingress traffic
counters at the physical component indicated by
entPhysicalIndex. Entries can only be created for
physical components, e.g.,line cards, which support
this type of ingress traffic counters. "
INDEX { entPhysicalIndex, fcRouteFlowIndex }
::= { fcRouteFlowStatTable 1 }
FcRouteFlowStatEntry ::=
SEQUENCE {
fcRouteFlowIndex Unsigned32,
fcRouteFlowType BITS,
fcRouteFlowVsanId VsanIndex,
fcRouteFlowDestId FcAddressId,
fcRouteFlowSrcId FcAddressId,
fcRouteFlowMask FcAddressId,
fcRouteFlowPort InterfaceIndex,
fcRouteFlowFrames Counter64,
fcRouteFlowBytes Counter64,
fcRouteFlowCreationTime TimeStamp,
fcRouteFlowRowStatus RowStatus
}
fcRouteFlowIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index of this entry."
::= { fcRouteFlowStatEntry 1 }
fcRouteFlowType OBJECT-TYPE
SYNTAX BITS { vsanId(0),destId(1),srcId(2),port(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The matching criteria by which flows are selected to be
included in the traffic which is instrumented by the
ingress traffic counters. For each bit which is set, the
corresponding object must be configured by the network
manager when creating an entry.
vsanId(0) represents object fcRouteFlowVsanId, destId(1)
represents fcRouteFlowDestId, srcId(2) represents
fcRouteFlowSrcId, port(3) represents fcRouteFlowPort.It
is optional to provide fcRouteFlowMask. If
fcRouteFlowMask is not provided then the default value
255.255.255 is used.
This object cannot be modified while the corresponding
value of fcRouteFlowRowStatus is equal to 'active'. "
::= { fcRouteFlowStatEntry 2 }
fcRouteFlowVsanId OBJECT-TYPE
SYNTAX VsanIndex (1..4093)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The id of VSAN.
This object cannot be modified while the corresponding
value of fcRouteFlowRowStatus is equal to 'active'. "
::= { fcRouteFlowStatEntry 3 }
fcRouteFlowDestId OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The destination fibre channel address id.
This object cannot be modified while the corresponding
value of fcRouteFlowRowStatus is equal to 'active'. "
::= { fcRouteFlowStatEntry 4 }
fcRouteFlowSrcId OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The source fibre channel address id.
This object cannot be modified while the corresponding
value of fcRouteFlowRowStatus is equal to 'active'. "
::= { fcRouteFlowStatEntry 5 }
fcRouteFlowMask OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mask for source and destination fibre channel
address id.
This object cannot be modified while the corresponding
value of fcRouteFlowRowStatus is equal to 'active'."
::= { fcRouteFlowStatEntry 6 }
fcRouteFlowPort OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The physical ingress port to which this counter applies.
This object cannot be modified while the corresponding
value of fcRouteFlowRowStatus is equal to 'active'. "
::= { fcRouteFlowStatEntry 7 }
fcRouteFlowFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frames for the flow created by
the network manager. "
::= { fcRouteFlowStatEntry 8 }
fcRouteFlowBytes OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received frame bytes for the flow created
by the network manager. "
::= { fcRouteFlowStatEntry 9 }
fcRouteFlowCreationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp indicating the time the row was created
or modified. "
::= { fcRouteFlowStatEntry 11 }
fcRouteFlowRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. "
::= { fcRouteFlowStatEntry 12 }
-- Conformance
fcRouteMIBCompliances OBJECT IDENTIFIER ::= { fcRouteMIBConformance 1 }
fcRouteMIBGroups OBJECT IDENTIFIER ::= { fcRouteMIBConformance 2 }
fcRouteMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- superceeded by
-- fcRouteMIBCompliance1
DESCRIPTION
"The compliance statement for entities which
implement the fc Route mib."
MODULE MANDATORY-GROUPS { fcRouteGroup,
fcRouteTableGroup,
fcRouteStatGroup }
OBJECT fcRoutePermanent
MIN-ACCESS read-only
DESCRIPTION
"It is complaint to support read only."
OBJECT fcRouteRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported."
OBJECT fcRouteFlowRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported."
OBJECT fcRouteFlowType
DESCRIPTION
"It is sufficient to support only a subset of all
the possible combinations of the individual bit
values."
::= { fcRouteMIBCompliances 1 }
fcRouteMIBCompliance1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement the fc Route mib."
MODULE MANDATORY-GROUPS { fcRouteGroup,
fcRouteTableGroup,
fcRouteStatGroup }
OBJECT fcRoutePermanent
MIN-ACCESS read-only
DESCRIPTION
"It is complaint to support read only."
OBJECT fcRouteRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported."
OBJECT fcRouteFlowRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)}
DESCRIPTION
"Only three values 'createAndGo', 'destroy' and
'active' out of the six enumerated values need to
be supported."
OBJECT fcRouteFlowType
DESCRIPTION
"It is sufficient to support only a subset of all
the possible combinations of the individual bit
values."
--OBJECT fcRouteProto
--DESCRIPTION
-- "It is sufficient to support only a subset of all
-- the defined values. "
OBJECT fcRouteDomainId
DESCRIPTION
"It is compliant to support only a subset of
values from the range defined."
OBJECT fcRouteMetric
DESCRIPTION
"It is compliant to support only a subset of
values from the range defined."
::= { fcRouteMIBCompliances 2 }
fcRouteGroup OBJECT-GROUP
OBJECTS { fcRouteLastChangeTime,fcRoutePreference,
fcRouteVerifyAction,fcRouteVerifyType,
fcRouteVerifyModule,fcRouteVerifyVsanID,
fcRouteVerifyRouteType,fcRouteVerifyResult,
fcRouteVerifyLock}
STATUS current
DESCRIPTION
"A collection of objects giving route information."
::= { fcRouteMIBGroups 1 }
fcRouteTableGroup OBJECT-GROUP
OBJECTS { fcRouteDomainId,fcRouteMetric,fcRouteType,
fcRoutePermanent,fcRouteRowStatus}
STATUS current
DESCRIPTION
"A collection of objects for displaying and configuring
route's."
::= { fcRouteMIBGroups 2 }
fcRouteStatGroup OBJECT-GROUP
OBJECTS { fcRouteFlowType,fcRouteFlowVsanId,fcRouteFlowDestId,
fcRouteFlowSrcId,fcRouteFlowMask,fcRouteFlowPort,
fcRouteFlowFrames,fcRouteFlowBytes,
fcRouteFlowCreationTime,
fcRouteFlowRowStatus }
STATUS current
DESCRIPTION
"A collection of objects for displaying and configuring
ingress traffic flow counters."
::= { fcRouteMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink