MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-FC-MGMT-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2238 lines
75 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-FC-MGMT-MIB: Cisco Fibre Channel Management MIB file
--
-- August 2002, Arvind Prabhudev
--
-- Copyright (c) 2002 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-FC-MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32, Counter32, Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
ifIndex FROM IF-MIB
ciscoExperiment FROM CISCO-SMI
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
ciscoFcMgmtMIB MODULE-IDENTITY
LAST-UPDATED "200209120000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO "Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-dwdm@cisco.com"
DESCRIPTION
"This module defines management information specific to
Fibre Channel-attached devices. This module is an
adaptation of IETF's IPS working group's draft,
draft-ietf-ips-fcmgmt-mib-02"
REVISION "200209120000Z"
DESCRIPTION
"Initial version of Cisco Fibre Channel Management MIB
module."
::= { ciscoExperiment 999999 }
cfcmgmtObjects OBJECT IDENTIFIER ::= { ciscoFcMgmtMIB 1 }
cfcmgmtNotifications OBJECT IDENTIFIER ::= { ciscoFcMgmtMIB 2 }
cfcmgmtNotifPrefix OBJECT IDENTIFIER ::= { cfcmgmtNotifications 0 }
cfcmgmtConformance OBJECT IDENTIFIER ::= { ciscoFcMgmtMIB 3 }
-- ********************************
-- Textual Conventions
--
CfcmFcNameIdOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The World Wide Name (WWN) associated with a Fibre Channel
(FC) entity. WWNs were initially defined as 64-bits in
length. The latest definition (for future use) is 128-bits
long. The zero-length string value is used in circumstances
where the WWN is unassigned/unknown."
SYNTAX OCTET STRING (SIZE(0 | 8 | 16))
CfcmFcAddressId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A Fibre Channel Address ID, a 24-bit value unique within
the address space of a Fabric."
SYNTAX OCTET STRING (SIZE(0 | 3))
CfcmDomainIdOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Domain Id (of a FC switch), or zero if no Domain Id
has been assigned."
SYNTAX INTEGER(0..239)
CfcmFcPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of a Fibre Channel port, being one of the types
described below.
unknown - Fibre Channel port type is not known.
other - the port type is something other than the ones
described below.
dynamic - the port could be one of the below port types
and this varies dynamically.
nPort - Any port on a node device, e.g., a disk, PC, etc.
that is directly attached to a Fabric port.
(Refer FC-PH, FC-FS).
nlPort - An 'nPort' that also has arbitrated loop
capabilities. (Refer FC-AL-2).
fPort - A port on a fibre channel fabric.
(Refer FC-PH, FC-FS).
flPort - A 'fPort' that also has arbitrated loop
capabilities. (Refer FC-AL-2).
ePort - A fabric expansion port which attaches to
another 'ePort' or 'bPort' to create an Inter-Switch
Link. (Refer FC-SW-2).
bPort - A bridge port on a device that implements FC-BBW
and connects to an E_port on a switch. (Refer FC-BB)."
SYNTAX INTEGER {
unknown(1),
other(2), -- none of the below
dynamic(3), -- determined dynamically
nPort(4),
nlPort(5),
fPort(6),
flPort(7),
ePort(8),
bPort(9)
}
CfcmFcClasses ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of Fibre Channel classes of service."
REFERENCE
"Classes of service are described in FC-FS Section 13."
SYNTAX BITS { classF(0), class1(1), class2(2), class3(3),
class4(4), class5(5), class6(6) }
CfcmFcBbCredit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The buffer-to-buffer credit of an FC port. i.e., the number
of frames a FC device can receive at a time without causing
a buffer overrun condition."
SYNTAX Integer32 (0..32767)
CfcmFcBbCreditModel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The buffer-to-buffer credit model of an Fx_Port."
SYNTAX INTEGER { regular(1), alternate (2) }
CfcmFcDataFieldSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Receive Data Field Size associated with an FC port."
SYNTAX Integer32 (128..2112)
CfcmFcUnitFunctions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of functions that a Fibre Channel Interconnect
Element or Platform might perform. A value with no bits
set, indicates the function(s) are unknown. The individual
bits have the following meanings:
other - none of the following.
hub - a device that interconnects L_Ports, but does not
operate as an FL_Port.
switch - a fabric element conforming to the Fibre Channel
switch fabric set of standards (e.g., FC-SW, FC-SW-2).
bridge - a device that encapsulates Fibre Channel frames
within another protocol (e.g., FC-BB, FC-BB-2).
gateway - a device that converts an FC-4 to another protocol
(e.g., FCP to iSCSI).
host - a computer system that provides end users services
such as computation and storage access.
storageSubsys - an integrated collection of storage
controllers, storage devices, and necessary software, that
provides storage services to one or more hosts.
storageAccessDev - a device that provides storage management
and access for heterogeneous hosts and heterogeneous devices
(e.g., medium changer).
nas - a device that connects to a network and provides file
access services.
wdmux - a device that modulates/demodulates each of several
data streams (e.g., Fibre Channel protocol data streams)
onto/from a different part of the light spectrum in an
optical fiber."
SYNTAX BITS {
other(0), -- none of the following
hub(1),
switch(2),
bridge(3),
gateway(4),
host(5),
storageSubsys(6),
storageAccessDev(7),
nas(8),
wdmux(9)
}
CfcmPhysicalIndexOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The index value for a physical entity's row in the Entity
MIB's entPhysicalTable. A zero value indicates that no row
in the entPhysicalTable is applicable."
REFERENCE
"entPhysicalTable is defined in the Entity MIB, RFC 2737."
SYNTAX INTEGER (0..2147483647)
CfcmHrSWInstalledIndexOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The index value for a software module's row in the Host
Resources MIB's hrSWInstalledTable. A zero value indicates
that no row in the hrSWInstalledTable is applicable."
REFERENCE
"hrSWInstalledTable is defined in the Host Resources MIB,
RFC 2790."
SYNTAX Integer32 (0..2147483647)
CfcmMilliSeconds ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Time units in milliseconds."
SYNTAX Unsigned32
CfcmMicroSeconds ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Time units in microseconds."
SYNTAX Unsigned32
--********************************
-- MIB object definitions
--
cfcmInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the local Fibre Channel management
instances."
::= { cfcmgmtObjects 1 }
cfcmInstanceEntry OBJECT-TYPE
SYNTAX CfcmInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of attributes for a particular local Fibre Channel
management instance."
INDEX { cfcmInstanceIndex }
::= { cfcmInstanceTable 1 }
CfcmInstanceEntry ::=
SEQUENCE {
cfcmInstanceIndex Unsigned32,
cfcmInstanceWwn CfcmFcNameIdOrZero,
cfcmInstanceFunctions CfcmFcUnitFunctions,
cfcmInstancePhysicalIndex CfcmPhysicalIndexOrZero,
cfcmInstanceSoftwareIndex CfcmHrSWInstalledIndexOrZero,
cfcmInstanceStatus INTEGER,
cfcmInstanceTextName SnmpAdminString,
cfcmInstanceDescr SnmpAdminString,
cfcmInstanceFabricId CfcmFcNameIdOrZero
}
cfcmInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value which uniquely identifies this
instance amongst all local Fibre Channel management
instances.
It is mandatory that this value remain constant between
restarts of the agent except, in case of certain re-
configurations of the local system where it is natural
for it to change. It is desirable that this value remain
constant across restarts."
::= { cfcmInstanceEntry 1 }
cfcmInstanceWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the instance has one (or more) WWN(s), then this object
contains that (or one of those) WWN(s).
If the instance does not have a WWN associated with it, then
this object contains the zero-length string."
::= { cfcmInstanceEntry 2 }
cfcmInstanceFunctions OBJECT-TYPE
SYNTAX CfcmFcUnitFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One (or more) Fibre Channel unit functions being performed
by this instance."
::= { cfcmInstanceEntry 3 }
cfcmInstancePhysicalIndex OBJECT-TYPE
SYNTAX CfcmPhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this management instance corresponds to a physical
component (or to a hierarchy of physical components), then
this object's value is the value of the entPhysicalIndex of
that component (or of the component at the root of that
hierarchy). If there is no correspondence to a physical
component (or no component which has an entPhysicalIndex
value), then the value of this object is zero."
REFERENCE
"entPhysicalIndex is defined in the Entity MIB, RFC 2737."
::= { cfcmInstanceEntry 4 }
cfcmInstanceSoftwareIndex OBJECT-TYPE
SYNTAX CfcmHrSWInstalledIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this management instance corresponds to an installed
software module, then this object's value is the value of
the hrSWInstalledIndex of that module. If there is no
correspondence to an installed software module (or no module
which has a hrSWInstalledIndex value), then the value of
this object is zero."
REFERENCE
"hrSWInstalledIndex is defined in the Host Resources MIB,
RFC 2790"
::= { cfcmInstanceEntry 5 }
cfcmInstanceStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2), -- able to operate correctly
warning(3), -- needs attention
failed(4) -- something has failed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overall status of the Fibre Channel entity/entities managed
by this management instance. The value should reflect the
most serious status of such entities."
::= { cfcmInstanceEntry 6 }
cfcmInstanceTextName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..79))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual name for this management instance and the Fibre
Channel entity/entities that it is managing."
::= { cfcmInstanceEntry 7 }
cfcmInstanceDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual description of this management instance and the
Fibre Channel entity/entities that it is managing."
::= { cfcmInstanceEntry 8 }
cfcmInstanceFabricId OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The globally unique Fabric Identifier which identifies the
fabric to which the Fibre Channel entity/entities managed by
this management instance are connected, or, of which they
are a part. This is typically the Node WWN of the principal
switch of a Fibre Channel fabric. The zero-length string
indicates that the fabric identifier is unknown (or not
applicable)."
::= { cfcmInstanceEntry 9 }
--********************************
-- The Fibre Channel Switch Table
--
cfcmSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about Fibre Channel switches which
are managed by Fibre Channel management instances. Each
Fibre Channel management instance can manage one or more
Fibre Channel switches."
::= { cfcmgmtObjects 2 }
cfcmSwitchEntry OBJECT-TYPE
SYNTAX CfcmSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Fibre Channel switch which
is managed by the management instance given by
cfcmInstanceIndex."
INDEX { cfcmInstanceIndex, cfcmSwitchIndex }
::= { cfcmSwitchTable 1 }
CfcmSwitchEntry ::=
SEQUENCE {
cfcmSwitchIndex Unsigned32,
cfcmSwitchDomainId CfcmDomainIdOrZero,
cfcmSwitchPrincipal TruthValue
}
cfcmSwitchIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which uniquely identifies a Fibre
Channel switch amongst those managed by one Fibre Channel
management instance."
::= { cfcmSwitchEntry 1 }
cfcmSwitchDomainId OBJECT-TYPE
SYNTAX CfcmDomainIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Domain Id of this switch. A value of zero indicates
that a switch has not (yet) been assigned a Domain Id."
::= { cfcmSwitchEntry 2 }
cfcmSwitchPrincipal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this switch is the principal
switch within its fabric."
::= { cfcmSwitchEntry 3 }
--********************************
-- The Fibre Channel Port Table
--
cfcmPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Fibre Channel ports. Each Fibre Channel
port is represented by one entry in the IF-MIB's ifTable."
REFERENCE
"RFC 2863, The Interfaces Group MIB, June 2000."
::= { cfcmgmtObjects 3 }
cfcmPortEntry OBJECT-TYPE
SYNTAX CfcmPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about a specific port."
INDEX { ifIndex }
::= { cfcmPortTable 1 }
CfcmPortEntry ::=
SEQUENCE {
cfcmPortInstanceIndex Unsigned32,
cfcmPortWwn CfcmFcNameIdOrZero,
cfcmPortNodeWwn CfcmFcNameIdOrZero,
cfcmPortAdminType CfcmFcPortType,
cfcmPortOperType CfcmFcPortType,
cfcmPortFcCapClass CfcmFcClasses,
cfcmPortFcOperClass CfcmFcClasses,
cfcmPortTransmitterType INTEGER,
cfcmPortConnectorType INTEGER,
cfcmPortSerialNumber SnmpAdminString,
cfcmPortPhysicalNumber Unsigned32,
cfcmPortAdminSpeed INTEGER,
cfcmPortCapProtocols BITS,
cfcmPortOperProtocols BITS
}
cfcmPortInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of cfcmInstanceIndex by which the Fibre Channel
management instance, which manages this port, is identified
in the cfcmInstanceTable."
::= { cfcmPortEntry 1 }
cfcmPortWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The World Wide Name of the port, or the zero-length string
if the port does not have a WWN."
::= { cfcmPortEntry 2 }
cfcmPortNodeWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The World Wide Name of the Node which contains this port,
or the zero-length string if the port does not have a node
WWN."
::= { cfcmPortEntry 3 }
cfcmPortAdminType OBJECT-TYPE
SYNTAX CfcmFcPortType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired type of this port. Each port
will typically only be able to support a subset of these
types."
::= { cfcmPortEntry 4 }
cfcmPortOperType OBJECT-TYPE
SYNTAX CfcmFcPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational type of this port."
::= { cfcmPortEntry 5 }
cfcmPortFcCapClass OBJECT-TYPE
SYNTAX CfcmFcClasses
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The classes of service capability of this port."
::= { cfcmPortEntry 6 }
cfcmPortFcOperClass OBJECT-TYPE
SYNTAX CfcmFcClasses
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The classes of service that are currently operational on
this port. For an FL_Port, this is the union of the classes
being supported across all attached NL_Ports."
::= { cfcmPortEntry 7 }
cfcmPortTransmitterType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
other(2),
shortwave850nm(3),
longwave1550nm(4),
longwave1310nm(5),
electrical(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The technology of the port transceiver."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.3"
::= { cfcmPortEntry 8 }
cfcmPortConnectorType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
other(2),
gbic(3),
embedded(4),
glm(5),
gbicSerialId(6),
gbicNoSerialId(7),
sfpSerialId(8),
sfpNoSerialId(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module type of the port connector. This object refers
to the hardware implementation of the port. It will be
'embedded' if the hardware equivalent to Gigabit interface
card (GBIC) is part of the line card and is unremovable. It
will be 'glm' if it's a gigabit link module (GLM). It will
be 'gbicSerialId' if the GBIC serial id can be read, else it
will be 'gbicNoSerialId'. It will be 'sfpSerialId', if the
small form factor (SFP) pluggable GBICs serial id can be
read, else it will be 'sfpNoSerialId'."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.4"
::= { cfcmPortEntry 9 }
cfcmPortSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number associated with the port (e.g., for a
GBIC). If not applicable, the object's value is a zero-
length string."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.4"
::= { cfcmPortEntry 10 }
cfcmPortPhysicalNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the port's 'Physical Port Number' as defined by
GS-3."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.5"
::= { cfcmPortEntry 11 }
cfcmPortAdminSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
eighthGbs(2), -- 125Mbs
quarterGbs(3), -- 250Mbs
halfGbs(4), -- 500Mbs
oneGbs(5), -- 1Gbs
twoGbs(6), -- 2Gbs
fourGbs(7), -- 4Gbs
tenGbs(8) -- 10Gbs
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The speed of the interface:
'auto' - auto-negotiation
'tenGbs' - 10Gbs
'fourGbs' - 4Gbs
'twoGbs' - 2Gbs
'oneGbs' - 1Gbs
'halfGbs' - 500Mbs
'quarterGbs' - 250Mbs
'eighthGbs' - 125Mbs"
::= { cfcmPortEntry 12 }
cfcmPortCapProtocols OBJECT-TYPE
SYNTAX BITS {
unknown(0),
loop(1),
fabric(2),
scsi(3),
tcpIp(4),
vi(5),
ficon(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit mask specifying the higher level protocols which are
supported on this port. Note that for generic Fx_Ports,
E_Ports and B_Ports, this object will indicate all
protocols."
::= { cfcmPortEntry 13 }
cfcmPortOperProtocols OBJECT-TYPE
SYNTAX BITS {
unknown(0),
loop(1),
fabric(2),
scsi(3),
tcpIp(4),
vi(5),
ficon(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit mask specifying the higher level protocols which are
currently operational on this port. For Fx_Ports, E_Ports
and B_Ports, this object will typically have the value
'unknown'."
::= { cfcmPortEntry 14 }
--********************************
-- Port Statistics
--
cfcmPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statistics for Fibre Channel ports."
::= { cfcmgmtObjects 4 }
cfcmPortStatsEntry OBJECT-TYPE
SYNTAX CfcmPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing statistics for a Fibre Channel port."
AUGMENTS { cfcmPortEntry }
::= { cfcmPortStatsTable 1 }
CfcmPortStatsEntry ::=
SEQUENCE {
cfcmPortBBCreditZeros Counter64,
cfcmPortFullInputBuffers Counter64,
cfcmPortClass2RxFrames Counter64,
cfcmPortClass2RxOctets Counter64,
cfcmPortClass2TxFrames Counter64,
cfcmPortClass2TxOctets Counter64,
cfcmPortClass2Discards Counter64,
cfcmPortClass2RxFbsyFrames Counter64,
cfcmPortClass2RxPbsyFrames Counter64,
cfcmPortClass2RxFrjtFrames Counter64,
cfcmPortClass2RxPrjtFrames Counter64,
cfcmPortClass2TxFbsyFrames Counter64,
cfcmPortClass2TxPbsyFrames Counter64,
cfcmPortClass2TxFrjtFrames Counter64,
cfcmPortClass2TxPrjtFrames Counter64,
cfcmPortClass3RxFrames Counter64,
cfcmPortClass3RxOctets Counter64,
cfcmPortClass3TxFrames Counter64,
cfcmPortClass3TxOctets Counter64,
cfcmPortClass3Discards Counter64,
cfcmPortClassFRxFrames Counter32,
cfcmPortClassFRxOctets Counter32,
cfcmPortClassFTxFrames Counter32,
cfcmPortClassFTxOctets Counter32,
cfcmPortClassFDiscards Counter32
}
cfcmPortBBCreditZeros OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions in/out of the buffer-to-buffer
credit zero state. The other side is not providing any
credit."
::= { cfcmPortStatsEntry 1 }
cfcmPortFullInputBuffers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occurrences when all input buffers of a port
were full and outbound buffer-to-buffer credit transitioned
to zero, i.e., there became no credit to provide to other
side."
::= { cfcmPortStatsEntry 2 }
cfcmPortClass2RxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames received at this port."
::= { cfcmPortStatsEntry 3 }
cfcmPortClass2RxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames received
at this port."
::= { cfcmPortStatsEntry 4 }
cfcmPortClass2TxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames transmitted out of this port."
::= { cfcmPortStatsEntry 5 }
cfcmPortClass2TxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames
transmitted out of this port."
::= { cfcmPortStatsEntry 6 }
cfcmPortClass2Discards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames that were discarded upon
reception at this port."
::= { cfcmPortStatsEntry 7 }
cfcmPortClass2RxFbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when either the
fabric or the destination port is temporarily busy. Note
that this counter will never increment for an F_Port."
::= { cfcmPortStatsEntry 8 }
cfcmPortClass2RxPbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when the
destination port is temporarily busy."
::= { cfcmPortStatsEntry 9 }
cfcmPortClass2RxFrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was returned to this port as
a result of a Class 2 frame that was rejected by the fabric.
Note that this counter will never increment for an F_Port."
::= { cfcmPortStatsEntry 10 }
cfcmPortClass2RxPrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was returned to this port as
a result of a Class 2 frame that was rejected at the
destination N_Port."
::= { cfcmPortStatsEntry 11 }
cfcmPortClass2TxFbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because either the Fabric or the destination port was
temporarily busy. Note that this counter will never
increment for an N_Port."
::= { cfcmPortStatsEntry 12 }
cfcmPortClass2TxPbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because the destination port was temporarily busy. Note
that this counter will never increment for an F_Port."
::= { cfcmPortStatsEntry 13 }
cfcmPortClass2TxFrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was generated by this port
as a result of a Class 2 frame being rejected by the fabric.
Note that this counter will never increment for an N_Port."
::= { cfcmPortStatsEntry 14 }
cfcmPortClass2TxPrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was generated by this port
as a result of a Class 2 frame being rejected at the
destination N_Port. Note that this counter will never
increment for an F_Port."
::= { cfcmPortStatsEntry 15 }
cfcmPortClass3RxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames received at this port."
::= { cfcmPortStatsEntry 16 }
cfcmPortClass3RxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames received
at this port."
::= { cfcmPortStatsEntry 17 }
cfcmPortClass3TxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames transmitted out of this port."
::= { cfcmPortStatsEntry 18 }
cfcmPortClass3TxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames
transmitted out of this port."
::= { cfcmPortStatsEntry 19 }
cfcmPortClass3Discards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames that were discarded upon
reception at this port."
::= { cfcmPortStatsEntry 20 }
cfcmPortClassFRxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames received at this port."
::= { cfcmPortStatsEntry 21 }
cfcmPortClassFRxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class F frames received
at this port."
::= { cfcmPortStatsEntry 22 }
cfcmPortClassFTxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames transmitted out of this port."
::= { cfcmPortStatsEntry 23 }
cfcmPortClassFTxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class F frames
transmitted out of this port."
::= { cfcmPortStatsEntry 24 }
cfcmPortClassFDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames that were discarded upon
reception at this port."
::= { cfcmPortStatsEntry 25 }
--********************************
-- Port Low-capacity Statistics
--
-- these are Counter32 "low-capacity" counters for systems
-- which do not support Counter64's
cfcmPortLcStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmPortLcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Counter32-based statistics which are a shadow of
the Counter64 statistics in the cfcmPortStatsTable, for
systems which do not support Counter64."
::= { cfcmgmtObjects 5 }
cfcmPortLcStatsEntry OBJECT-TYPE
SYNTAX CfcmPortLcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing low-capacity (i.e., based on Counter32)
statistics for a Fibre Channel port."
AUGMENTS { cfcmPortEntry }
::= { cfcmPortLcStatsTable 1 }
CfcmPortLcStatsEntry ::=
SEQUENCE {
cfcmPortLcBBCreditZeros Counter32,
cfcmPortLcFullInputBuffers Counter32,
cfcmPortLcClass2RxFrames Counter32,
cfcmPortLcClass2RxOctets Counter32,
cfcmPortLcClass2TxFrames Counter32,
cfcmPortLcClass2TxOctets Counter32,
cfcmPortLcClass2Discards Counter32,
cfcmPortLcClass2RxFbsyFrames Counter32,
cfcmPortLcClass2RxPbsyFrames Counter32,
cfcmPortLcClass2RxFrjtFrames Counter32,
cfcmPortLcClass2RxPrjtFrames Counter32,
cfcmPortLcClass2TxFbsyFrames Counter32,
cfcmPortLcClass2TxPbsyFrames Counter32,
cfcmPortLcClass2TxFrjtFrames Counter32,
cfcmPortLcClass2TxPrjtFrames Counter32,
cfcmPortLcClass3RxFrames Counter32,
cfcmPortLcClass3RxOctets Counter32,
cfcmPortLcClass3TxFrames Counter32,
cfcmPortLcClass3TxOctets Counter32,
cfcmPortLcClass3Discards Counter32
}
cfcmPortLcBBCreditZeros OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions in/out of the buffer-to-buffer
credit zero state. The other side is not providing any
credit."
::= { cfcmPortLcStatsEntry 1 }
cfcmPortLcFullInputBuffers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occurrences when all input buffers of a port
were full and outbound buffer-to-buffer credit transitioned
to zero, i.e., there became no credit to provide to other
side."
::= { cfcmPortLcStatsEntry 2 }
cfcmPortLcClass2RxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames received at this port."
::= { cfcmPortLcStatsEntry 3 }
cfcmPortLcClass2RxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames received
at this port."
::= { cfcmPortLcStatsEntry 4 }
cfcmPortLcClass2TxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames transmitted out of this port."
::= { cfcmPortLcStatsEntry 5 }
cfcmPortLcClass2TxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames
transmitted out of this port."
::= { cfcmPortLcStatsEntry 6 }
cfcmPortLcClass2Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames that were discarded upon
reception at this port."
::= { cfcmPortLcStatsEntry 7 }
cfcmPortLcClass2RxFbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when either the
fabric or the destination port is temporarily busy. Note
that this counter will never increment for an F_Port."
::= { cfcmPortLcStatsEntry 8 }
cfcmPortLcClass2RxPbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when the
destination port is temporarily busy."
::= { cfcmPortLcStatsEntry 9 }
cfcmPortLcClass2RxFrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was returned to this port as
a result of a Class 2 frame that was rejected by the fabric.
Note that this counter will never increment for an F_Port."
::= { cfcmPortLcStatsEntry 10 }
cfcmPortLcClass2RxPrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was returned to this port as
a result of a Class 2 frame that was rejected at the
destination N_Port."
::= { cfcmPortLcStatsEntry 11 }
cfcmPortLcClass2TxFbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because either the Fabric or the destination port was
temporarily busy. Note that this counter will never
increment for an N_Port."
::= { cfcmPortLcStatsEntry 12 }
cfcmPortLcClass2TxPbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because the destination port was temporarily busy. Note
that this counter will never increment for an F_Port."
::= { cfcmPortLcStatsEntry 13 }
cfcmPortLcClass2TxFrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was generated by this port
as a result of a Class 2 frame being rejected by the fabric.
Note that this counter will never increment for an N_Port."
::= { cfcmPortLcStatsEntry 14 }
cfcmPortLcClass2TxPrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was generated by this port
as a result of a Class 2 frame being rejected at the
destination N_Port. Note that this counter will never
increment for an F_Port."
::= { cfcmPortLcStatsEntry 15 }
cfcmPortLcClass3RxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames received at this port."
::= { cfcmPortLcStatsEntry 16 }
cfcmPortLcClass3RxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames received
at this port."
::= { cfcmPortLcStatsEntry 17 }
cfcmPortLcClass3TxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames transmitted out of this port."
::= { cfcmPortLcStatsEntry 18 }
cfcmPortLcClass3TxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames
transmitted out of this port."
::= { cfcmPortLcStatsEntry 19 }
cfcmPortLcClass3Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames that were discarded upon
reception at this port."
::= { cfcmPortLcStatsEntry 20 }
--********************************
-- Port Error Counters
--
cfcmPortErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmPortErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error counters for Fibre Channel ports."
::= { cfcmgmtObjects 6 }
cfcmPortErrorsEntry OBJECT-TYPE
SYNTAX CfcmPortErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error counters for a Fibre Channel port."
AUGMENTS { cfcmPortEntry }
::= { cfcmPortErrorsTable 1 }
CfcmPortErrorsEntry ::=
SEQUENCE {
cfcmPortRxLinkResets Counter32,
cfcmPortTxLinkResets Counter32,
cfcmPortLinkResets Counter32,
cfcmPortRxOfflineSequences Counter32,
cfcmPortTxOfflineSequences Counter32,
cfcmPortLinkFailures Counter32,
cfcmPortLossofSynchs Counter32,
cfcmPortLossofSignals Counter32,
cfcmPortPrimSeqProtocolErrors Counter32,
cfcmPortInvalidTxWords Counter32,
cfcmPortInvalidCRCs Counter32,
cfcmPortInvalidOrderedSets Counter32,
cfcmPortFrameTooLongs Counter32,
cfcmPortTruncatedFrames Counter32,
cfcmPortAddressErrors Counter32,
cfcmPortDelimiterErrors Counter32,
cfcmPortEncodingDisparityErrors Counter32,
cfcmPortOtherErrors Counter32
}
cfcmPortRxLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link resets (LR primitives) received."
::= { cfcmPortErrorsEntry 1 }
cfcmPortTxLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link resets (LRs primitive) transmitted."
::= { cfcmPortErrorsEntry 2 }
cfcmPortLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the reset link protocol was initiated
on this port. This includes the number of Loop
Initialization Primitive (LIP) events on an arbitrated loop
port."
::= { cfcmPortErrorsEntry 3 }
cfcmPortRxOfflineSequences OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Primitive OLS received at this port."
::= { cfcmPortErrorsEntry 4 }
cfcmPortTxOfflineSequences OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline Primitive OLS transmitted by this
port."
::= { cfcmPortErrorsEntry 5 }
cfcmPortLinkFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link failures. This count is part of FC-PH's
Link Error Status Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { cfcmPortErrorsEntry 6 }
cfcmPortLossofSynchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of instances of synchronization loss detected at
this port. This count is part of FC-PH's Link Error Status
Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { cfcmPortErrorsEntry 7 }
cfcmPortLossofSignals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of instances of signal loss detected at this
port. This count is part of FC-PH's Link Error Status Block
(LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { cfcmPortErrorsEntry 8 }
cfcmPortPrimSeqProtocolErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of primitive sequence protocol errors detected
at this port. This count is part of CFC-PH's Link Error
Status Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { cfcmPortErrorsEntry 9 }
cfcmPortInvalidTxWords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid transmission words received at this
port. This count is part of FC-PH's Link Error Status Block
(LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { cfcmPortErrorsEntry 10 }
cfcmPortInvalidCRCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received with invalid CRC. This count
is part of FC-PH's Link Error Status Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { cfcmPortErrorsEntry 11 }
cfcmPortInvalidOrderedSets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid ordered sets received at this port."
::= { cfcmPortErrorsEntry 12 }
cfcmPortFrameTooLongs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received at this port where the frame
length was greater than what was agreed to in FLOGI/PLOGI.
This could be caused by losing the end of frame delimiter."
::= { cfcmPortErrorsEntry 13 }
cfcmPortTruncatedFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received at this port where the frame
length was less than the minimum indicated by the frame
header - normally 24 bytes, but it could be more if the
DFCTL field indicates an optional header should have been
present."
::= { cfcmPortErrorsEntry 14 }
cfcmPortAddressErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received with unknown addressing.
e.x. unknown SID or DID. the SID or DID is not known to the
routing algorithm."
::= { cfcmPortErrorsEntry 15 }
cfcmPortDelimiterErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid frame delimiters received at this
port. An example is a frame with a class 2 start and a class
3 at the end."
::= { cfcmPortErrorsEntry 16 }
cfcmPortEncodingDisparityErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of encoding disparity errors received at this
port."
::= { cfcmPortErrorsEntry 17 }
cfcmPortOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errors which were detected on this port but
which were not counted by any other error counter in this
row."
::= { cfcmPortErrorsEntry 18 }
--********************************
-- The Fibre Channel Fx_Port Table
--
cfcmFxPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmFxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional information about Fibre Channel ports which is
specific to Fx_Ports. This table will contain one entry for
each cfcmPortTable entry which represents an Fx_Port."
::= { cfcmgmtObjects 7 }
cfcmFxPortEntry OBJECT-TYPE
SYNTAX CfcmFxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about FC protocol related
timer values of a specific Fx_Port and information about
buffer capacity, maximum data field size of frames handled
by this port and other capability information."
INDEX { ifIndex }
::= { cfcmFxPortTable 1 }
CfcmFxPortEntry ::=
SEQUENCE {
cfcmFxPortRatov CfcmMilliSeconds,
cfcmFxPortEdtov CfcmMilliSeconds,
cfcmFxPortRttov CfcmMilliSeconds,
cfcmFxPortHoldTime CfcmMicroSeconds,
cfcmFxPortCapBbCreditMax CfcmFcBbCredit,
cfcmFxPortCapBbCreditMin CfcmFcBbCredit,
cfcmFxPortCapDataFieldSizeMax CfcmFcDataFieldSize,
cfcmFxPortCapDataFieldSizeMin CfcmFcDataFieldSize,
cfcmFxPortCapClass2SeqDeliv TruthValue,
cfcmFxPortCapClass3SeqDeliv TruthValue,
cfcmFxPortCapHoldTimeMax CfcmMicroSeconds,
cfcmFxPortCapHoldTimeMin CfcmMicroSeconds
}
cfcmFxPortRatov OBJECT-TYPE
SYNTAX CfcmMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Resource_Allocation_Timeout Value configured for this
Fx_Port. This is used as the timeout value for determining
when to reuse an Nx_Port resource such as a
Recovery_Qualifier. It represents the Error_Detect_Timeout
value (see cfcmFxPortEdtov) plus twice the maximum time that
a frame may be delayed within the Fabric and still be
delivered."
::= { cfcmFxPortEntry 1 }
cfcmFxPortEdtov OBJECT-TYPE
SYNTAX CfcmMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Error_Detect_Timeout value configured for this Fx_Port.
This is used as the timeout value for detecting an error
condition."
::= { cfcmFxPortEntry 2 }
cfcmFxPortRttov OBJECT-TYPE
SYNTAX CfcmMilliSeconds
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receiver_Transmitter_Timeout value of this Fx_Port.
This is used by the receiver logic to detect Loss of
Synchronization."
::= { cfcmFxPortEntry 3 }
cfcmFxPortHoldTime OBJECT-TYPE
SYNTAX CfcmMicroSeconds
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum time that this Fx_Port shall hold a frame
before discarding the frame if it is unable to deliver the
frame. The value 0 means that this Fx_Port does not support
this parameter."
::= { cfcmFxPortEntry 4 }
cfcmFxPortCapBbCreditMax OBJECT-TYPE
SYNTAX CfcmFcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers which this port is
capable of making available for holding frames from attached
Nx_Port(s)."
::= { cfcmFxPortEntry 5 }
cfcmFxPortCapBbCreditMin OBJECT-TYPE
SYNTAX CfcmFcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers which this port is
capable of making available for holding frames from attached
Nx_Port(s)."
::= { cfcmFxPortEntry 6 }
cfcmFxPortCapDataFieldSizeMax OBJECT-TYPE
SYNTAX CfcmFcDataFieldSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size in bytes of the Data Field in a frame that
this Fx_Port is capable of receiving from an attached
Nx_Port."
::= { cfcmFxPortEntry 7 }
cfcmFxPortCapDataFieldSizeMin OBJECT-TYPE
SYNTAX CfcmFcDataFieldSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum size in bytes of the Data Field in a frame that
this Fx_Port is capable of receiving from an attached
Nx_Port."
::= { cfcmFxPortEntry 8 }
cfcmFxPortCapClass2SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this Fx_Port is capable of
supporting Class 2 Sequential Delivery."
::= { cfcmFxPortEntry 9 }
cfcmFxPortCapClass3SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this Fx_Port is capable of
supporting Class 3 Sequential Delivery."
::= { cfcmFxPortEntry 10 }
cfcmFxPortCapHoldTimeMax OBJECT-TYPE
SYNTAX CfcmMicroSeconds
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum holding time that this Fx_Port is capable of
supporting."
::= { cfcmFxPortEntry 11 }
cfcmFxPortCapHoldTimeMin OBJECT-TYPE
SYNTAX CfcmMicroSeconds
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum holding time that this Fx_Port is capable of
supporting."
::= { cfcmFxPortEntry 12 }
--********************************
-- The Fibre Channel Inter-Switch Port Table
--
cfcmISPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmISPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional information about E_Ports, B_Ports, and any
other type of Fibre Channel port to which inter-switch links
can be connected. This table will contain one entry for
each cfcmPortTable entry which represents such a port."
::= { cfcmgmtObjects 8 }
cfcmISPortEntry OBJECT-TYPE
SYNTAX CfcmISPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about a specific port
connected to an inter-switch link."
INDEX { ifIndex }
::= { cfcmISPortTable 1 }
CfcmISPortEntry ::=
SEQUENCE {
cfcmISPortClassFCredit CfcmFcBbCredit,
cfcmISPortClassFDataFieldSize CfcmFcDataFieldSize
}
cfcmISPortClassFCredit OBJECT-TYPE
SYNTAX CfcmFcBbCredit
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of Class F data frames which can be
transmitted by the inter-switch port without receipt of ACK
or Link_Response frames."
::= { cfcmISPortEntry 1 }
cfcmISPortClassFDataFieldSize OBJECT-TYPE
SYNTAX CfcmFcDataFieldSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size which the inter-switch port has
agreed to support for Class F frames to/from this port. The
size specifies the largest Data Field Size for an FT_1
frame."
::= { cfcmISPortEntry 2 }
--********************************
-- The Fabric Login table
--
-- This table contains the information held by FC switches
-- about the Nx_Ports which are logged-in/attached to their
-- Fx_Ports
cfcmFLoginTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmFLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains one entry for each Nx_Port logged-
in/attached to a particular Fx_Port in the switch. Each
entry contains the services parameters established during
the most recent Fabric Login, explicit or implicit. Note
that an Fx_Port may have one or more Nx_Ports attached to
it."
::= { cfcmgmtObjects 9 }
cfcmFLoginEntry OBJECT-TYPE
SYNTAX CfcmFLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing service parameters established from a
successful Fabric Login."
INDEX { ifIndex, cfcmFLoginNxPortIndex }
::= { cfcmFLoginTable 1 }
CfcmFLoginEntry ::=
SEQUENCE {
cfcmFLoginNxPortIndex Unsigned32,
cfcmFLoginPortWwn CfcmFcNameIdOrZero,
cfcmFLoginNodeWwn CfcmFcNameIdOrZero,
cfcmFLoginBbCreditModel CfcmFcBbCreditModel,
cfcmFLoginBbCredit CfcmFcBbCredit,
cfcmFLoginClassesAgreed CfcmFcClasses,
cfcmFLoginClass2SeqDelivAgreed TruthValue,
cfcmFLoginClass2DataFieldSize CfcmFcDataFieldSize,
cfcmFLoginClass3SeqDelivAgreed TruthValue,
cfcmFLoginClass3DataFieldSize CfcmFcDataFieldSize
}
cfcmFLoginNxPortIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which uniquely identifies an Nx_Port
amongst all those attached to the Fx_Port indicated by
ifIndex."
::= { cfcmFLoginEntry 1 }
cfcmFLoginPortWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name of the attached Nx_Port, or the zero-length
string if unknown."
::= { cfcmFLoginEntry 2 }
cfcmFLoginNodeWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name of the attached Nx_Port, or the zero-length
string if unknown."
::= { cfcmFLoginEntry 3 }
cfcmFLoginBbCreditModel OBJECT-TYPE
SYNTAX CfcmFcBbCreditModel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer-to-buffer credit model in use by the Fx_Port."
::= { cfcmFLoginEntry 4 }
cfcmFLoginBbCredit OBJECT-TYPE
SYNTAX CfcmFcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of buffers available for holding frames to be
transmitted to the attached Nx_Port. These buffers are for
buffer-to-buffer flow control in the direction from Fx_Port
to Nx_Port."
::= { cfcmFLoginEntry 5 }
cfcmFLoginClassesAgreed OBJECT-TYPE
SYNTAX CfcmFcClasses
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Classes of Service which the Fx_Port has agreed to
support for this Nx_Port."
::= { cfcmFLoginEntry 6 }
cfcmFLoginClass2SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the Fx_Port has agreed to support
Class 2 sequential delivery for this Nx_Port. This is only
meaningful if Class 2 service has been agreed."
::= { cfcmFLoginEntry 7 }
cfcmFLoginClass2DataFieldSize OBJECT-TYPE
SYNTAX CfcmFcDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size which the Fx_Port has agreed to
support for Class 2 frames to/from this Nx_Port. The size
specifies the largest Data Field Size for an FT_1 frame.
This is only meaningful if Class 2 service has been agreed."
::= { cfcmFLoginEntry 8 }
cfcmFLoginClass3SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the Fx_Port has agreed to support
Class 3 sequential delivery for this Nx_Port. This is only
meaningful if Class 3 service has been agreed."
::= { cfcmFLoginEntry 9 }
cfcmFLoginClass3DataFieldSize OBJECT-TYPE
SYNTAX CfcmFcDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size which the Fx_Port has agreed to
support for Class 3 frames to/from this Nx_Port. The size
specifies the largest Data Field Size for an FT_1 frame.
This is only meaningful if Class 3 service has been agreed."
::= { cfcmFLoginEntry 10 }
--********************************
-- The Link table
--
-- This table is intended to assist management applications
-- in determining the topology of the network. The table
-- contains any recent information which the agent knows
-- about Fibre Channel links, both those which terminate at
-- a local port, as well as any others for which information
-- is known.
cfcmLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfcmLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing any Fibre Channel link information which
is known to local Fibre Channel managed instances. One end
of such a link is typically at a local port, but the table
can also contain information on links for which neither end
is a local port.
If one end of a link terminates locally, then that end is
termed 'end1'; the other end is termed 'end2'."
::= { cfcmgmtObjects 10 }
cfcmLinkEntry OBJECT-TYPE
SYNTAX CfcmLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information which a particular Fibre
Channel managed instance has about a Fibre Channel link.
The two ends of the link are called 'end1' and 'end2'."
INDEX { cfcmInstanceIndex, cfcmLinkIndex }
::= { cfcmLinkTable 1 }
CfcmLinkEntry ::=
SEQUENCE {
cfcmLinkIndex Unsigned32,
cfcmLinkEnd1NodeWwn CfcmFcNameIdOrZero,
cfcmLinkEnd1PhysPortNumber Unsigned32,
cfcmLinkEnd1PortWwn CfcmFcNameIdOrZero,
cfcmLinkEnd2NodeWwn CfcmFcNameIdOrZero,
cfcmLinkEnd2PhysPortNumber Unsigned32,
cfcmLinkEnd2PortWwn CfcmFcNameIdOrZero,
cfcmLinkEnd2AgentAddress SnmpAdminString,
cfcmLinkEnd2PortType CfcmFcPortType,
cfcmLinkEnd2UnitType CfcmFcUnitFunctions,
cfcmLinkEnd2FcAddressId CfcmFcAddressId
}
cfcmLinkIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer which uniquely identifies one link
within the set of links about which a particular managed
instance has information."
::= { cfcmLinkEntry 1 }
cfcmLinkEnd1NodeWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name of end1, or the zero-length string if
unknown."
::= { cfcmLinkEntry 2 }
cfcmLinkEnd1PhysPortNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port number of end1, or zero if unknown."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.5"
::= { cfcmLinkEntry 3 }
cfcmLinkEnd1PortWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port WWN of end1, or the zero-length string if unknown.
('end1' is local if this value is equal to the value of
cfcmPortWwn in one of the rows of the cfcmPortTable.)"
::= { cfcmLinkEntry 4 }
cfcmLinkEnd2NodeWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name of end2, or the zero-length string if
unknown."
::= { cfcmLinkEntry 5 }
cfcmLinkEnd2PhysPortNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port number of end2, or zero if unknown."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.5"
::= { cfcmLinkEntry 6 }
cfcmLinkEnd2PortWwn OBJECT-TYPE
SYNTAX CfcmFcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port WWN of end2, or the zero-length string if
unknown."
::= { cfcmLinkEntry 7 }
cfcmLinkEnd2AgentAddress OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the SNMP agent for the Fibre Channel
Interconnect Element or Platform of which end2 is a part.
If the address is unknown, the value of this object is the
zero-length string."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.1.7"
::= { cfcmLinkEntry 8 }
cfcmLinkEnd2PortType OBJECT-TYPE
SYNTAX CfcmFcPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port type of end2."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sect 6.1.2.2.2"
::= { cfcmLinkEntry 9 }
cfcmLinkEnd2UnitType OBJECT-TYPE
SYNTAX CfcmFcUnitFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of/function(s) performed by the Fibre Channel
Interconnect Element or Platform of which end2 is a part."
REFERENCE
"FC-GS-3 Rev 7.01, 28 Nov 2000, sections 6.1.2.1.2
and 6.1.2.3.2"
::= { cfcmLinkEntry 10 }
cfcmLinkEnd2FcAddressId OBJECT-TYPE
SYNTAX CfcmFcAddressId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fibre Channel Address ID of end2, or the zero-length
string if unknown."
::= { cfcmLinkEntry 11 }
--********************************
-- Conformance Section
--
cfcmgmtCompliances OBJECT IDENTIFIER ::= { cfcmgmtConformance 1 }
cfcmgmtGroups OBJECT IDENTIFIER ::= { cfcmgmtConformance 2 }
cfcmgmtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for compliance to this Fibre
Channel Management MIB."
MODULE -- this module
MANDATORY-GROUPS { cfcmInstanceBasicGroup,
cfcmPortBasicGroup,
cfcmPortStatsGroup,
cfcmPortErrorsGroup }
GROUP cfcmPortClass23StatsGroup
DESCRIPTION
"This group is mandatory only for systems which
keep class-specific traffic statistics on Class 2
on Class 3 traffic."
GROUP cfcmPortClassFStatsGroup
DESCRIPTION
"This group is mandatory only for FC switches which
keep statistics on Class F traffic."
GROUP cfcmPortLcStatsGroup
DESCRIPTION
"This group is mandatory only for agents which
do not provide Counter64 counters."
GROUP cfcmSwitchBasicGroup
DESCRIPTION
"This group is mandatory only for Fibre Channel
managed instances which manage Fibre Channel
switches."
GROUP cfcmSwitchPortGroup
DESCRIPTION
"This group is mandatory only for Fibre Channel
managed instances which manage Fibre Channel
switches."
GROUP cfcmSwitchLoginGroup
DESCRIPTION
"This group is mandatory only for Fibre Channel
managed instances which manage Fibre Channel
switches."
OBJECT cfcmInstancePhysicalIndex
SYNTAX INTEGER (0)
DESCRIPTION
"Implementation of a non-zero value is not required."
OBJECT cfcmInstanceSoftwareIndex
SYNTAX Integer32 (0)
DESCRIPTION
"Implementation of a non-zero value is not required."
OBJECT cfcmInstanceTextName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cfcmInstanceDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cfcmPortAdminType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cfcmPortAdminSpeed
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cfcmSwitchDomainId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cfcmISPortClassFCredit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { cfcmgmtCompliances 1 }
--********************************
-- Object Groups
--
cfcmInstanceBasicGroup OBJECT-GROUP
OBJECTS { cfcmInstanceWwn, cfcmInstanceFunctions,
cfcmInstancePhysicalIndex, cfcmInstanceSoftwareIndex,
cfcmInstanceStatus, cfcmInstanceTextName,
cfcmInstanceDescr, cfcmInstanceFabricId }
STATUS current
DESCRIPTION
"Basic information about Fibre Channel managed instances."
::= { cfcmgmtGroups 1 }
cfcmSwitchBasicGroup OBJECT-GROUP
OBJECTS { cfcmSwitchDomainId, cfcmSwitchPrincipal }
STATUS current
DESCRIPTION
"Basic information about Fibre Channel switches."
::= { cfcmgmtGroups 2 }
cfcmPortBasicGroup OBJECT-GROUP
OBJECTS { cfcmPortInstanceIndex, cfcmPortWwn, cfcmPortNodeWwn,
cfcmPortAdminType, cfcmPortOperType, cfcmPortFcCapClass,
cfcmPortFcOperClass, cfcmPortTransmitterType,
cfcmPortConnectorType, cfcmPortSerialNumber,
cfcmPortPhysicalNumber, cfcmPortAdminSpeed,
cfcmPortCapProtocols, cfcmPortOperProtocols }
STATUS current
DESCRIPTION
"Basic information about Fibre Channel ports."
::= { cfcmgmtGroups 3 }
cfcmPortStatsGroup OBJECT-GROUP
OBJECTS { cfcmPortBBCreditZeros, cfcmPortFullInputBuffers }
STATUS current
DESCRIPTION
"Traffic statistics, which are not specific to any one class
of service, for Fibre Channel ports."
::= { cfcmgmtGroups 4 }
cfcmPortClass23StatsGroup OBJECT-GROUP
OBJECTS { cfcmPortClass2RxFrames, cfcmPortClass2RxOctets,
cfcmPortClass2TxFrames, cfcmPortClass2TxOctets,
cfcmPortClass2Discards, cfcmPortClass2RxFbsyFrames,
cfcmPortClass2RxPbsyFrames,
cfcmPortClass2RxFrjtFrames,
cfcmPortClass2RxPrjtFrames,
cfcmPortClass2TxFbsyFrames,
cfcmPortClass2TxPbsyFrames,
cfcmPortClass2TxFrjtFrames,
cfcmPortClass2TxPrjtFrames, cfcmPortClass3RxFrames,
cfcmPortClass3RxOctets, cfcmPortClass3TxFrames,
cfcmPortClass3TxOctets, cfcmPortClass3Discards }
STATUS current
DESCRIPTION
"Traffic statistics for Class 2 and Class 3 traffic on Fibre
Channel ports."
::= { cfcmgmtGroups 5 }
cfcmPortClassFStatsGroup OBJECT-GROUP
OBJECTS { cfcmPortClassFRxFrames,
cfcmPortClassFRxOctets,
cfcmPortClassFTxFrames,
cfcmPortClassFTxOctets,
cfcmPortClassFDiscards }
STATUS current
DESCRIPTION
"Traffic statistics for Class F traffic on Fibre Channel
ports."
::= { cfcmgmtGroups 6 }
cfcmPortLcStatsGroup OBJECT-GROUP
OBJECTS { cfcmPortLcBBCreditZeros, cfcmPortLcFullInputBuffers,
cfcmPortLcClass2RxFrames, cfcmPortLcClass2RxOctets,
cfcmPortLcClass2TxFrames, cfcmPortLcClass2TxOctets,
cfcmPortLcClass2Discards, cfcmPortLcClass3Discards,
cfcmPortLcClass3RxFrames, cfcmPortLcClass3RxOctets,
cfcmPortLcClass3TxFrames, cfcmPortLcClass3TxOctets,
cfcmPortLcClass2RxFbsyFrames,
cfcmPortLcClass2RxPbsyFrames,
cfcmPortLcClass2RxFrjtFrames,
cfcmPortLcClass2RxPrjtFrames,
cfcmPortLcClass2TxFbsyFrames,
cfcmPortLcClass2TxPbsyFrames,
cfcmPortLcClass2TxFrjtFrames,
cfcmPortLcClass2TxPrjtFrames }
STATUS current
DESCRIPTION
"Low-capacity (32-bit) statistics for Fibre Channel ports."
::= { cfcmgmtGroups 7 }
cfcmPortErrorsGroup OBJECT-GROUP
OBJECTS { cfcmPortRxLinkResets, cfcmPortTxLinkResets,
cfcmPortLinkResets, cfcmPortRxOfflineSequences,
cfcmPortTxOfflineSequences, cfcmPortLinkFailures,
cfcmPortLossofSynchs, cfcmPortLossofSignals,
cfcmPortPrimSeqProtocolErrors, cfcmPortInvalidTxWords,
cfcmPortInvalidCRCs, cfcmPortInvalidOrderedSets,
cfcmPortFrameTooLongs, cfcmPortTruncatedFrames,
cfcmPortAddressErrors, cfcmPortDelimiterErrors,
cfcmPortEncodingDisparityErrors,
cfcmPortOtherErrors }
STATUS current
DESCRIPTION
"Error statistics for Fibre Channel ports."
::= { cfcmgmtGroups 8 }
cfcmSwitchPortGroup OBJECT-GROUP
OBJECTS { cfcmFxPortRatov, cfcmFxPortEdtov, cfcmFxPortRttov,
cfcmFxPortHoldTime, cfcmFxPortCapBbCreditMax,
cfcmFxPortCapBbCreditMin,
cfcmFxPortCapDataFieldSizeMax,
cfcmFxPortCapDataFieldSizeMin,
cfcmFxPortCapClass2SeqDeliv,
cfcmFxPortCapClass3SeqDeliv,
cfcmFxPortCapHoldTimeMax,
cfcmFxPortCapHoldTimeMin,
cfcmISPortClassFCredit,
cfcmISPortClassFDataFieldSize }
STATUS current
DESCRIPTION
"Information about ports on a Fibre Channel switch."
::= { cfcmgmtGroups 9 }
cfcmSwitchLoginGroup OBJECT-GROUP
OBJECTS { cfcmFLoginPortWwn, cfcmFLoginNodeWwn,
cfcmFLoginBbCreditModel, cfcmFLoginBbCredit,
cfcmFLoginClassesAgreed,
cfcmFLoginClass2SeqDelivAgreed,
cfcmFLoginClass2DataFieldSize,
cfcmFLoginClass3SeqDelivAgreed,
cfcmFLoginClass3DataFieldSize }
STATUS current
DESCRIPTION
"Information known to a Fibre Channel switch about
attached/logged-in Nx_Ports."
::= { cfcmgmtGroups 10 }
cfcmLinkBasicGroup OBJECT-GROUP
OBJECTS { cfcmLinkEnd1NodeWwn , cfcmLinkEnd1PhysPortNumber,
cfcmLinkEnd1PortWwn, cfcmLinkEnd2NodeWwn ,
cfcmLinkEnd2PhysPortNumber, cfcmLinkEnd2PortWwn,
cfcmLinkEnd2AgentAddress, cfcmLinkEnd2PortType,
cfcmLinkEnd2UnitType, cfcmLinkEnd2FcAddressId }
STATUS current
DESCRIPTION
"Information about Fibre Channel links."
::= { cfcmgmtGroups 11 }
END
Reference in New Issue View Git Blame Copy Permalink