MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-EVC-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2990 lines
101 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-EVC-MIB.my : Cisco Ethernet Virtual Connection MIB
--
-- January 2007, Viet Nguyen
--
-- Copyright (c) 2007 by Cisco Systems, Inc.
--
-- All rights reserved.
-- *****************************************************************
CISCO-EVC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Unsigned32,
Gauge32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue,
RowStatus,
StorageType
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
VlanId,
VlanIdOrNone
FROM Q-BRIDGE-MIB
ifIndex,
InterfaceIndexOrZero
FROM IF-MIB
CiscoCosList
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoEvcMIB MODULE-IDENTITY
LAST-UPDATED "200712200000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-ethermibs@cisco.com"
DESCRIPTION
"Metro Ethernet services can support a wide range of
applications and subscriber needs easily, efficiently
and cost-effectively. Using standard Ethernet interfaces,
subscribers can set up secure, private Ethernet Virtual
Connections, to connect their sites together and connect
to business partners, suppliers and the Internet.
This MIB module defines the managed objects and notifications
describing Ethernet Virtual Connections.
Ethernet Virtual Connections (EVC), are defined by the Metro
Ethernet Forum (MEF), as an association between two or more
UNIs. Frames within an EVC can only be exchanged among the
associated UNIs. Frames sent into the MEN via a particular
UNI must not be delivered back to the UNI from which it
originated.
Along an EVC path, there are demarcation flow points on
associated ingress and egress interface, of every device,
through which the EVC passes. A service instance represents
these flow points where a service passes through an interface.
From an operational perspective, a service instance serves
three purposes:
1. Defines the instance of a particular EVC service on
a specific interface and identifies all frames that
belongs to that particular service/flow.
2. To provide the capability of applying the configured
features to those frames belonging to the service.
3. To optionally define how to forward those frames in
the data-path.
The association of a service instance to an EVC depicts
an instance of an Ethernet flow on a particular interface
for an end-to-end (UNI-to-UNI) Ethernet service for a
subscriber.
The following diagram illustrates the association of
EVC, UNIs and service instances. UNI physical ports
are depicted as 'U', and service instances as 'x'.
CE MEN MEN CE
------- ------- ------- -------
| | | | () | | | |
| |--------Ux x|--( )--|x xU--------| |
| | | | () | | | |
------- ------- ------- -------
^ ^
| |
-------- EVC ---------
This MIB module addresses the functional areas of network
management for EVC, including:
The operational mode for interfaces that are providing
Ethernet service(s).
The service attributes regarding an interface behaving
as UNI, such as CE-VLAN mapping and layer 2 control
protocol (eg. stp, vtp, cdp) processing.
The provisioning of service instances to define flow
points for an Ethernet service.
The operational status of EVCs for notifications
of status changes, and EVC creation and deletion.
Definition of terms and acronyms:
B-Tag: Backbone Tag field in Ethernet 802.1ah frame
CE: Customer Edge
CE-VLAN: Customer Edge VLAN
CoS: Class Of Service
EVC: Ethernet Virtual Connection
I-SID: Service Instance Identifier field in Ethernet
802.1ah frame
MEN: Metro Ethernet Network
NNI: Network to Network Interface
OAM: Operations Administration and Management
Service frame: An Ethernet frame transmitted across the
UNI toward the service provider or an Ethernet frame
transmitted across the UNI toward the Subscriber.
Service Instance: A flow point of an Ethernet service
Service provider: The organization providing Ethernet
service(s).
Subscriber: The organization purchasing and/or using
Ethernet service(s).
UNI: User Network Interface
The physical demarcation point between the
responsibility of the service provider and
the responsibility of the Subscriber.
UNI-C: User Network Interface, subscriber side
UNI-N: User Network Interface, service provider side
VLAN: Virtual Local Area Network"
REVISION "200712200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 613 }
ciscoEvcMIBNotifications OBJECT IDENTIFIER
::= { ciscoEvcMIB 0 }
ciscoEvcMIBObjects OBJECT IDENTIFIER
::= { ciscoEvcMIB 1 }
ciscoEvcMIBConformance OBJECT IDENTIFIER
::= { ciscoEvcMIB 2 }
cevcSystem OBJECT IDENTIFIER
::= { ciscoEvcMIBObjects 1 }
cevcPort OBJECT IDENTIFIER
::= { ciscoEvcMIBObjects 2 }
cevcEvc OBJECT IDENTIFIER
::= { ciscoEvcMIBObjects 3 }
cevcServiceInstance OBJECT IDENTIFIER
::= { ciscoEvcMIBObjects 4 }
cevcEvcNotificationConfig OBJECT IDENTIFIER
::= { ciscoEvcMIBObjects 5 }
-- Textual Conventions
CiscoEvcIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer-value which uniquely identifies the EVC."
SYNTAX Unsigned32 (1..4294967295 )
CiscoEvcIndexOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention is an extension to textual
convention 'CiscoEvcIndex'. It includes the value of
'0' in addition to the range of 1-429496725. Value
of '0' indicates that the EVC has been neither configured
nor assigned."
SYNTAX Unsigned32 (0..4294967295 )
CevcL2ControlProtocolType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines the different types of layer 2 control protocols:
'other'
None of the following.
'cdp'
Cisco Discovery Protocol.
'dtp'
Dynamic Trunking Protocol.
'pagp'
Port Aggregration Protocol.
'udld'
UniDirectional Link Detection.
'vtp'
Vlan Trunking Protocol.
'lacp'
Link Aggregration Control Protocol.
'dot1x'
IEEE 802.1x
'stp'
Spanning Tree Protocol."
SYNTAX INTEGER {
other(1),
cdp(2),
dtp(3),
pagp(4),
udld(5),
vtp(6),
lacp(7),
dot1x(8),
stp(9)
}
ServiceInstanceTarget ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic service instance target.
An ServiceInstanceTarget value is always interpreted within the
context of an ServiceInstanceTargetType value. Every usage of
the ServiceInstanceTarget textual convention is required to
specify the ServiceInstanceTargetType object which provides the
context. It is suggested that the ServiceInstanceTargetType
object is logically registered before the object(s) which use
the ServiceInstanceTarget textual convention if they appear in
the same logical row.
The value of an ServiceInstanceTarget object must always be
consistent with the value of the associated
ServiceInstanceTargetType object. Attempts to set an
ServiceInstanceTarget object to a value which is inconsistent
with the associated ServiceInstanceTargetType must fail with an
inconsistentValue error.
When this textual convention is used as the syntax of an index
object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, STD 58. In this
case, the object definition MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers."
SYNTAX OCTET STRING (SIZE (0..40))
ServiceInstanceTargetType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines the type of interface/media to which a service instance
is attached.
'other'
None of the following. This value MUST be used if the
value of the corresponding ServiceInstanceTarget
object is a zero-length string.
'interface'
Service instance is attached to the the interface
defined by ServiceInstanceInterface textual
convention.
Each definition of a concrete ServiceInstanceTargetType value
must be accompanied by a definition of a textual convention for
use with that ServiceInstanceTargetType.
To support future extensions, the ServiceInstanceTargetType
textual convention SHOULD NOT be sub-typed in object type
definitions. It MAY be sub-typed in compliance statements in
order to require only a subset of these target types for a
compliant implementation.
Implementations must ensure that ServiceInstanceTargetType
objects and any dependent objects (e.g. ServiceInstanceTarget
objects) are consistent. An inconsistentValue error must be
generated if an attempt to change an ServiceInstanceTargetType
object would, for example, lead to an undefined
ServiceInstanceTarget value. In particular,
ServiceInstanceTargetType/ServiceInstanceTarget pairs must be
changed together if the service instance taget type changes."
SYNTAX INTEGER {
other(1),
interface(2)
}
ServiceInstanceInterface ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention indicates the ifIndex which identifies
the interface that the service instance is attached, for which
the corresponding ifType has the value of (but not limited to)
'ethernetCsmacd'.
octets contents encoding
1-4 ifIndex network-byte order
The corresponding ServiceInstanceTargetType value is
interface(2)."
SYNTAX OCTET STRING (SIZE (4))
-- System Attributes
cevcMaxNumEvcs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of EVCs that the
system supports."
::= { cevcSystem 1 }
cevcNumCfgEvcs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the actual number of EVCs currently
configured on the system."
::= { cevcSystem 2 }
-- Port Table
cevcPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides the operational mode and configuration
limitations of the physical interfaces (ports) that provide
Ethernet services for the MEN.
This table has a sparse depedent relationship on the ifTable,
containing a row for each ifEntry having an ifType of
'ethernetCsmacd' capable of supporting Ethernet services."
::= { cevcPort 1 }
cevcPortEntry OBJECT-TYPE
SYNTAX CevcPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a port, a physical point, at which
signals can enter or leave the network en route to or from
another network to provide Ethernet services for the MEN.
The system automatically creates an entry for each ifEntry in
the ifTable having an ifType of 'ethernetCsmacd' capable of
supporting Ethernet services and entries are automatically
destroyed when the corresponding row in the ifTable is
destroyed."
INDEX { ifIndex }
::= { cevcPortTable 1 }
CevcPortEntry ::= SEQUENCE {
cevcPortMode INTEGER ,
cevcPortMaxNumEVCs Gauge32,
cevcPortMaxNumServiceInstances Gauge32
}
cevcPortMode OBJECT-TYPE
SYNTAX INTEGER {
uni(1),
nni(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Port denotes the physcial interface which can provide
Ethernet services. This object indicates the mode of the
port and its operational behaviour in the MEN.
'uni'
User Network Interface
The port resides on the interface between the end user
and the network. Additional information related
to the UNI is included in cevcUniTable.
'nni'
Network to Network Interface. The port resides on the
interface between two networks."
::= { cevcPortEntry 1 }
cevcPortMaxNumEVCs OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of EVCs that the
interface can support."
::= { cevcPortEntry 2 }
cevcPortMaxNumServiceInstances OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of service instances
that the interface can support."
::= { cevcPortEntry 3 }
-- UNI Service Attributes
cevcUniTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of UNIs locally configured on the
system.
This table has a sparse dependent relationship on the
cevcPortTable, containing a row for each cevcPortEntry
having a cevcPortMode column value 'uni'."
::= { cevcPort 2 }
cevcUniEntry OBJECT-TYPE
SYNTAX CevcUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an UNI and its service attributes.
The system automatically creates an entry when the system or
the EMS/NMS creates a row in the cevcPortTable with a
cevcPortMode of 'uni'. Likewise, the system automatically
destroys an entry when the system or the EMS/NMS destroys the
corresponding row in the cevcPortTable."
INDEX { ifIndex }
::= { cevcUniTable 1 }
CevcUniEntry ::= SEQUENCE {
cevcUniIdentifier SnmpAdminString,
cevcUniPortType INTEGER ,
cevcUniServiceAttributes BITS
}
cevcUniIdentifier OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies a string-value assigned to a UNI for
identification. When the UNI identifier is configured by the
system or the EMS/NMS, it should be unique among all UNIs for
the MEN.
If the UNI identifier value is not specified, the value of the
cevcUniIdentifier column is a zero-length string."
REFERENCE
"MEF 16, 'Ethernet Local Management Interface (E-LMI)',
January 2006"
::= { cevcUniEntry 1 }
cevcUniPortType OBJECT-TYPE
SYNTAX INTEGER {
dot1q(1),
dot1ad(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the UNI port type.
'dot1q'
The UNI port is an IEEE 802.1q port.
'dot1ad'
The UNI port is an IEEE 802.1ad port."
DEFVAL { dot1q }
::= { cevcUniEntry 2 }
cevcUniServiceAttributes OBJECT-TYPE
SYNTAX BITS {
serviceMultiplexing(0),
bundling(1),
allToOneBundling(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the UNI service attributes.
'serviceMultiplexing'
This bit specifies whether the UNI supports multiple
EVCs. Point-to-Point EVCs and Multipoint-to-Multipoint
EVCs may be multiplexed in any combination at the UNI
if this bit is set to '1'.
'bundling'
This bit specifies whether the UNI has the bundling
attribute configured. If this bit is set to '1', more
than one CE-VLAN ID can map to a particular EVC at the
UNI.
'allToOneBundling'
This bit specifies whether the UNI has the all to one
bundling attribute. If this bit is set to '1', all
CE-VLAN IDs map to a single EVC at the UNI.
To summarize the valid combinations of serviceMultiplexing(0),
bundling(1) and allToOneBundling(2) bits for an UNI, consider
the following diagram:
VALID COMBINATIONS
+---------------+-------+-------+-------+-------+-------+
|UNI ATTRIBUTES | 1 | 2 | 3 | 4 | 5 |
+---------------+-------+------+------------------------+
|Service | | | | | |
|Multiplexing | | Y | Y | | |
| | | | | | |
+---------------+-------+-------+-------+-------+-------+
| | | | | | |
|Bundling | | | Y | Y | |
| | | | | | |
+---------------+-------+-------+-------+-------+-------+
|All to One | | | | | |
|Bundling | | | | | Y |
| | | | | | |
+---------------+-------+-------+------ +-------+-------+"
DEFVAL { { serviceMultiplexing , bundling } }
::= { cevcUniEntry 3 }
-- Table for layer 2 control protocol processing
cevcPortL2ControlProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcPortL2ControlProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the layer 2 control protocol processing
attributes at UNI ports.
This table has an expansion dependent relationship on the
cevcUniTable, containing zero or more rows for each UNI."
::= { cevcPort 3 }
cevcPortL2ControlProtocolEntry OBJECT-TYPE
SYNTAX CevcPortL2ControlProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents the layer 2 control protocol processing
at the UNI.
The system automatically creates an entry for each layer 2
control protocol type when an entry is created in the
cevcUniTable, and entries are automatically destroyed when the
system destroys the corresponding row in the cevcUniTable."
INDEX {
ifIndex,
cevcPortL2ControlProtocolType
}
::= { cevcPortL2ControlProtocolTable 1 }
CevcPortL2ControlProtocolEntry ::= SEQUENCE {
cevcPortL2ControlProtocolType CevcL2ControlProtocolType,
cevcPortL2ControlProtocolAction INTEGER
}
cevcPortL2ControlProtocolType OBJECT-TYPE
SYNTAX CevcL2ControlProtocolType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the type of layer 2 control
protocol service frame as denoted by the value of
cevcPortL2ControlProtocolAction column."
::= { cevcPortL2ControlProtocolEntry 1 }
cevcPortL2ControlProtocolAction OBJECT-TYPE
SYNTAX INTEGER {
discard(1),
peer(2),
passToEvc(3),
peerAndPassToEvc(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the action to be taken for the given
layer 2 control protocol service frames which matches the
cevcPortL2ControlProtocolType, including:
'discard'
The port must discard all ingress service frames
carrying the layer 2 control protocol service
frames and the port must not generate any egress
service frames carrying the layer 2 control protocol
service frames. When this action is set at the port,
an EVC cannot process the layer 2 control protocol
service frames.
'peer'
The port must act as a peer, meaning it actively
participates with the Customer Equipment, in the
operation of the layer 2 control protocol service
frames. An example of this is port authentication
service at the UNI with 802.1x or enhanced link OAM
functionality by peering at the UNI with link OAM
(IEEE 802.3ah). When this action is set at the port,
an EVC cannot process the layer 2 control protocol
service frames.
'passToEvc'
The disposition of the service frames which are layer 2
control protocol service frames must be determined by
the layer 2 control protocol action attribute of the
EVC, (see cevcSIL2ControlProtocolAction for further
details).
'peerAndPassToEvc'
The layer 2 control protocol service frames will be
peered at the port and also passed to one or more EVCs
for tunneling. An example of this possibility is where
an 802.1x authentication frame is peered at the UNI for
UNI-based authentication, but also passed to a given
EVC for customer end-to-end authentication."
DEFVAL { discard }
::= { cevcPortL2ControlProtocolEntry 2 }
-- Table for UNI CE-VLAN ID/EVC Map
cevcUniCEVlanEvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcUniCEVlanEvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains for each UNI, a list of EVCs and the
association of CE-VLANs to the EVC. The CE-VLAN mapping is
locally significant to the UNI.
This table has an expansion dependent relationship on the
cevcUniTable, containing zero or more rows for each UNI."
::= { cevcPort 4 }
cevcUniCEVlanEvcEntry OBJECT-TYPE
SYNTAX CevcUniCEVlanEvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an EVC and the CE-VLANs that are mapped
to it at an UNI.
For example, if CE-VLANs 10, 20-30, 40 are mapped to an EVC
indicated by cevcUniEvcIndex = 1, at an UNI with ifIndex = 2,
this table will contain following rows to represent above
CE-VLAN map:
cevcUniCEVlanEvcEndingVlan.2.1.10 = 0
cevcUniCEVlanEvcEndingVlan.2.1.20 = 30
cevcUniCEVlanEvcEndingVlan.2.1.40 = 0
The system automatically creates an entry when the system
creates an entry in the cevcUniTable and an entry is created in
cevcSICEVlanTable for a service instance which is attached to
an EVC on this UNI. Likewise, the system automatically destroys
an entry when the system or the EMS/NMS destroys the
corresponding row in the cevcUniTable or in the
cevcSICEVlanTable."
INDEX {
ifIndex,
cevcUniEvcIndex,
cevcUniCEVlanEvcBeginningVlan
}
::= { cevcUniCEVlanEvcTable 1 }
CevcUniCEVlanEvcEntry ::= SEQUENCE {
cevcUniEvcIndex CiscoEvcIndex,
cevcUniCEVlanEvcBeginningVlan VlanId,
cevcUniCEVlanEvcEndingVlan VlanIdOrNone
}
cevcUniEvcIndex OBJECT-TYPE
SYNTAX CiscoEvcIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary integer-value that uniquely
identifies the EVC attached at an UNI."
::= { cevcUniCEVlanEvcEntry 1 }
cevcUniCEVlanEvcBeginningVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If cevcUniCEVlanEvcEndingVlan is '0', then this object
indicates a single VLAN in the list.
If cevcUniCEVlanEvcEndingVlan is not '0', then this object
indicates the first VLAN in a range of VLANs."
::= { cevcUniCEVlanEvcEntry 2 }
cevcUniCEVlanEvcEndingVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the last VLAN in a range of VLANs. If
the row does not describe a range, then the value of this
column must be '0'."
::= { cevcUniCEVlanEvcEntry 3 }
-- EVC Service Attributes
cevcEvcTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcEvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of EVCs, their service attributes
and operational status.
This table has an one-to-one dependent relationship on the
cevcEvcTable, containing a row for each EVC."
::= { cevcEvc 1 }
cevcEvcEntry OBJECT-TYPE
SYNTAX CevcEvcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents the EVC configured on the system and
its service atrributes.
Entries in this table may be created and deleted via the
cevcEvcRowStatus object or the management console on the
system.
Using SNMP, rows are created by a SET request setting the value
of cevcEvcRowStatus column to 'createAndGo'or 'createAndWait'.
Rows are deleted by a SET request setting the value of
cevcEvcRowStatus column to 'destroy'."
INDEX { cevcEvcIndex }
::= { cevcEvcTable 1 }
CevcEvcEntry ::= SEQUENCE {
cevcEvcIndex CiscoEvcIndex,
cevcEvcRowStatus RowStatus,
cevcEvcStorageType StorageType,
cevcEvcIdentifier SnmpAdminString,
cevcEvcType INTEGER ,
cevcEvcCfgUnis Unsigned32
}
cevcEvcIndex OBJECT-TYPE
SYNTAX CiscoEvcIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary integer-value that uniquely
identifies the EVC."
::= { cevcEvcEntry 1 }
cevcEvcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and
delete rows in the cevcEvcTable.
cevcEvcIdentifier column must have a valid value before a
row can be set to 'active'.
Writable objects in this table can be modified while the
value of cevcEvcRowStatus column is 'active'.
An entry cannot be deleted if there exists a service instance
which is referring to the cevcEvcEntry i.e. cevcSIEvcIndex
in the cevcSITable has the same value as cevcEvcIndex being
deleted."
::= { cevcEvcEntry 2 }
cevcEvcStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcEvcEntry 3 }
cevcEvcIdentifier OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..100))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies a string-value identifying the EVC.
This value should be unique across the MEN."
REFERENCE
"MEF 16, 'Ethernet Local Management Interface (E-LMI)',
January 2006"
::= { cevcEvcEntry 4 }
cevcEvcType OBJECT-TYPE
SYNTAX INTEGER {
pointToPoint(1),
multipointToMultipoint(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the type of EVC:
'pointToPoint'
Exactly two UNIs are associated with one another. An
ingress service frame at one UNI must not result in an
egress service frame at a UNI other than the other UNI
in the EVC.
'multipointToMultipoint'
Two or more UNIs are associated with one another. An
ingress service frame at one UNI must not result in an
egress service frame at a UNI that is not in the EVC."
DEFVAL { pointToPoint }
::= { cevcEvcEntry 5 }
cevcEvcCfgUnis OBJECT-TYPE
SYNTAX Unsigned32 (2..4294967295 )
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the number of UNIs expected to be
configured for the EVC in the MEN. The underlying OAM
protocol can use this value of UNIs to determine the EVC
operational status, cevcEvcOperStatus. For a
Multipoint-to-Multipoint EVC the minimum number of Uni's
would be two."
DEFVAL { 2 }
::= { cevcEvcEntry 6 }
cevcEvcStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcEvcStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists statical/status data of the EVC.
This table has an one-to-one dependent relationship on the
cevcEvcTable, containing a row for each EVC."
::= { cevcEvc 2 }
cevcEvcStateEntry OBJECT-TYPE
SYNTAX CevcEvcStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents status atrributes of an EVC.
The system automatically creates an entry when the system or
the EMS/NMS creates a row in the cevcEvcTable. Likewise, the
system automatically destroys an entry when the system or the
EMS/NMS destroys the corresponding row in the cevcEvcTable."
INDEX { cevcEvcIndex }
::= { cevcEvcStateTable 1 }
CevcEvcStateEntry ::= SEQUENCE {
cevcEvcOperStatus INTEGER ,
cevcEvcActiveUnis Gauge32
}
cevcEvcOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
active(2),
partiallyActive(3),
inactive(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the operational status of the EVC:
'unknown'
Not enough information available regarding the EVC to
determine the operational status at this time.
'active'
Fully operational between the UNIs in the EVC.
'partiallyActive'
Capable of transferring traffic among some but not all
of the UNIs in the EVC. This operational status is
applicable only for Multipoint-to-Multipoint EVCs.
'inactive'
Not capable of transferring traffic among any of the
UNIs in the EVC.
This value is derived from data gathered by underlying OAM
protocol."
::= { cevcEvcStateEntry 1 }
cevcEvcActiveUnis OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the number of active UNIs for the EVC
in the MEN. This value is derived from data gathered by
underlying OAM Protocol."
::= { cevcEvcStateEntry 2 }
-- Table for UNIs (local and remote) which are part of the EVC
cevcEvcUniTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcEvcUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of UNI's for each EVC configured
on the device. The UNIs can be local (i.e. physically
located on the system) or remote (i.e. not physically located
on the device). For local UNIs, the UNI Id is the same as
denoted by cevcUniIdentifier with the same ifIndex value as
cevcEvcLocalUniIfIndex. For remote UNIs, the underlying OAM
protocol, if capable, provides the UNI Id via its protocol
messages.
This table has an expansion dependent relationship on the
cevcEvcTable, containing a row for each UNI that is in
the EVC."
::= { cevcEvc 3 }
cevcEvcUniEntry OBJECT-TYPE
SYNTAX CevcEvcUniEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a UNI, either local or remote, in the
EVC.
The system automatically creates an entry, when an UNI is
attached to the EVC. Entries are automatically destroyed
when the system or the EMS/NMS destroys the corresponding
row in the cevcEvcTable or when an UNI is removed from the
EVC."
INDEX {
cevcEvcIndex,
cevcEvcUniIndex
}
::= { cevcEvcUniTable 1 }
CevcEvcUniEntry ::= SEQUENCE {
cevcEvcUniIndex Unsigned32,
cevcEvcUniId SnmpAdminString,
cevcEvcUniOperStatus INTEGER ,
cevcEvcLocalUniIfIndex InterfaceIndexOrZero
}
cevcEvcUniIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary integer-value that uniquely
identifies the UNI in an EVC."
::= { cevcEvcUniEntry 1 }
cevcEvcUniId OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the string-value identifying the UNI
that is in the EVC. For UNI that is local, this value is the
same as cevcUniIdentifier for the same ifIndex value as
cevcEvcLocalUniIfIndex. For UNI that is not on the system,
this value may be derived from the underlying OAM protocol.
If the UNI identifier value is not specified for the UNI or it
is unknown, the value of the cevcEvcUniId column is a
zero-length string."
REFERENCE
"MEF 16, Ethernet Local Management Interface (E-LMI),
January 2006"
::= { cevcEvcUniEntry 2 }
cevcEvcUniOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
notReachable(2),
up(3),
down(4),
adminDown(5),
localExcessiveError(6),
remoteExcessiveError(7),
localInLoopback(8),
remoteInLoopback(9),
localOutLoopback(10),
remoteOutLoopback(11)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational status derived from data
gathered by the OAM protocol for an UNI.
'unknown'
Status is not known; possible reason could be caused
by the OAM protocol has not provided information
regarding the UNI.
'notReachable'
UNI is not reachable; possible reason could be caused
by the OAM protocol messages having not been received
for an excessive length of time.
'up'
UNI is active, up, and able to pass traffic.
'down'
UNI is down and not passing traffic.
'adminDown'
UNI has been administratively put in down state.
'localExcessiveError'
UNI has experienced excessive number of invalid frames
on the local end of the physical link between UNI-C
and UNI-N.
'remoteExcessiveError'
UNI has experienced excessive number of invalid frames
on the remote side of the physical connection between
UNI-C and UNI-N.
'localInLoopback'
UNI is loopback on the local end of the physical link
between UNI-C and UNI-N.
'remoteInLoopback'
UNI is looped back on the remote end of the link
between UNI-C and UNI-N.
'localOutLoopback'
UNI just transitioned out of loopback on the local end
of the physcial link between UNI-C and UNI-N.
'remoteOutLoopback'
UNI just transitioned out of loopback on the remote
end of the physcial link between UNI-C and UNI-N."
::= { cevcEvcUniEntry 3 }
cevcEvcLocalUniIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the UNI is local on the system, this object specifies
the ifIndex of the UNI. The value '0' of this column
indicates remote UNI."
::= { cevcEvcUniEntry 4 }
-- Service Instance Table
cevcSITable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists each service instance and its association
to an interface/media type."
::= { cevcServiceInstance 1 }
cevcSIEntry OBJECT-TYPE
SYNTAX CevcSIEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a service instance configured on the
system and its service attributes.
Entries in this table may be created and deleted via the
cevcSIRowStatus object or the management console on the
system.
Using SNMP, rows are created by a SET request setting the value
of cevcSIRowStatus column to 'createAndGo'or 'createAndWait'.
Rows are deleted by a SET request setting the value of
cevcSIRowStatus column to 'destroy'."
INDEX { cevcSIIndex }
::= { cevcSITable 1 }
CevcSIEntry ::= SEQUENCE {
cevcSIIndex Unsigned32,
cevcSIRowStatus RowStatus,
cevcSIStorageType StorageType,
cevcSITargetType ServiceInstanceTargetType,
cevcSITarget ServiceInstanceTarget,
cevcSIName SnmpAdminString,
cevcSIEvcIndex CiscoEvcIndexOrZero,
cevcSIAdminStatus INTEGER ,
cevcSIForwardingType INTEGER
}
cevcSIIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary integer-value that uniquely
identifies a service instance"
::= { cevcSIEntry 1 }
cevcSIRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSITable.
This object cannot be set to 'active' until following
corresponding objects are assigned to valid values:
- cevcSITargetType
- cevcSITarget
- cevcSIName
Following writable objects in this table cannot be modified
while the value of cevcSIRowStatus is 'active':
- cevcSITargetType
- cevcSITarget
- cevcSIName
Objects in this table and all other tables that have the same
cevcSIIndex value as an index disappear when cevcSIRowStatus is
set to 'destroy'."
::= { cevcSIEntry 2 }
cevcSIStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSIEntry 3 }
cevcSITargetType OBJECT-TYPE
SYNTAX ServiceInstanceTargetType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the type of interface/media to which a
service instance has an attachment."
::= { cevcSIEntry 4 }
cevcSITarget OBJECT-TYPE
SYNTAX ServiceInstanceTarget
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the target to which a service instance
has an attachment.
If the target is unknown, the value of the cevcSITarget column
is a zero-length string."
::= { cevcSIEntry 5 }
cevcSIName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The textual name of the service instance. The value of this
column should be the name of the component as assigned by the
local interface/media type and should be be suitable for use
in commands entered at the device's 'console'. This might be
text name, such as 'si1' or a simple service instance number,
such as '1', depending on the interface naming syntax of the
device.
If there is no local name or this object is otherwise not
applicable, then this object contains a zero-length string."
::= { cevcSIEntry 6 }
cevcSIEvcIndex OBJECT-TYPE
SYNTAX CiscoEvcIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the EVC Index that the service instance
is associated. The value of '0' this column indicates that
the service instance is not associated to an EVC.
If the value of cevcSIEvcIndex column is not '0', there must
exist an active row in the cevcEvcTable with the same index
value for cevcEvcIndex."
DEFVAL { 0 }
::= { cevcSIEntry 7 }
cevcSIAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the desired state of the Service
Instance.
'up'
Ready to transfer traffic. When a system initializes,
all service instances start with this state.
'down'
The service instance is administratively down and is
not capable of transferring traffic."
DEFVAL { up }
::= { cevcSIEntry 8 }
cevcSIForwardingType OBJECT-TYPE
SYNTAX INTEGER {
other(0),
bridgeDomain(1)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates technique used by a service instance to
forward service frames.
'other'
If the forwarding behaviour of a service instance is
not defined or unknown, this object is set to other(0).
'bridgeDomain'
Bridge domain is used to forward service frames by a
service instance. If cevcSIForwardingType is
'bridge domainDomain(1)', there must exist an active
row in the cevcSIForwardingBdTable with the same
index value of cevcSIIndex. The object
cevcSIForwardBdNumber indicates the identifier of
the bridge domain component being used."
::= { cevcSIEntry 9 }
-- Service Instance Attributes
cevcSIStateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists each service instance and its service
attributes.
This table has an one-to-one dependent relationship on the
cevcSITable, containing a row for each service instance."
::= { cevcServiceInstance 2 }
cevcSIStateEntry OBJECT-TYPE
SYNTAX CevcSIStateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents operational status of a service instance.
The system automatically creates an entry when the system or
the EMS/NMS creates a row in the cevcSITable. Likewise, the
system automatically destroys an entry when the system or the
EMS/NMS destroys the corresponding row in the cevcSITable."
INDEX { cevcSIIndex }
::= { cevcSIStateTable 1 }
CevcSIStateEntry ::= SEQUENCE {
cevcSIOperStatus INTEGER
}
cevcSIOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
adminDown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the operational status of the Service
Instance.
'up'
The service instance is fully operational and able to
transfer traffic.
'down'
The service instance is down and not capable of
transferring traffic, and is not administratively
configured to be down by management system.
'adminDown'
The service instance has been explicitly configured to
administratively down by a management system and is not
capable of transferring traffic."
::= { cevcSIStateEntry 1 }
-- VLAN Rewrite Table
cevcSIVlanRewriteTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIVlanRewriteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the rewrite adjustments of the service
frame's VLAN tags for service instances.
This table has an expansion dependent relationship on the
cevcSITable, containing a row for a VLAN adjustment
for ingress and egress frames at each service instance."
::= { cevcServiceInstance 3 }
cevcSIVlanRewriteEntry OBJECT-TYPE
SYNTAX CevcSIVlanRewriteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents the VLAN adjustment for a Service
Instance."
INDEX {
cevcSIIndex,
cevcSIVlanRewriteDirection
}
::= { cevcSIVlanRewriteTable 1 }
CevcSIVlanRewriteEntry ::= SEQUENCE {
cevcSIVlanRewriteDirection INTEGER ,
cevcSIVlanRewriteRowStatus RowStatus,
cevcSIVlanRewriteStorageType StorageType,
cevcSIVlanRewriteAction INTEGER ,
cevcSIVlanRewriteEncapsulation INTEGER ,
cevcSIVlanRewriteVlan1 VlanId,
cevcSIVlanRewriteVlan2 VlanId,
cevcSIVlanRewriteSymmetric TruthValue
}
cevcSIVlanRewriteDirection OBJECT-TYPE
SYNTAX INTEGER {
ingress(1),
egress(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object specifies the VLAN adjustment for 'ingress'
frames or 'egress' frames on the service instance."
::= { cevcSIVlanRewriteEntry 1 }
cevcSIVlanRewriteRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSIVlanRewriteTable.
cevcSIVlanRewriteAction and cevcSIVlanRewriteEncapsulation must
have valid values before this object can be set to 'active'.
Writable objects in this table can be modified while the
value of cevcSIVlanRewriteRowStatus column is 'active'."
::= { cevcSIVlanRewriteEntry 2 }
cevcSIVlanRewriteStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSIVlanRewriteEntry 3 }
cevcSIVlanRewriteAction OBJECT-TYPE
SYNTAX INTEGER {
push1(1),
push2(2),
pop1(3),
pop2(4),
translate1To1(5),
translate1To2(6),
translate2To1(7),
translate2To2(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the rewrite action the device performs
for the service instance, including:
'push1'
Add cevcSIVlanRewriteVlan1 as the VLAN tag to the
service frame.
'push2'
Add cevcSIVlanRewriteVlan1 as the outer VLAN tag
and cevcSIVlanRewriteVlan2 as the inner VLAN tag of
the service frame.
'pop1'
Remove the outermost VLAN tag from the service frame.
'pop2'
Remove the two outermost VLAN tags from the service
frame.
'translate1To1'
Replace the outermost VLAN tag with the
cevcSIVlanRewriteVlan1 tag.
'translate1To2'
Replace the outermost VLAN tag with
cevcSIVlanRewriteVlan1 and add cevcSIVlanRewriteVlan2
to the second VLAN tag of the service frame.
'translate2To1'
Remove the outermost VLAN tag and replace the second
VLAN tag with cevcSIVlanVlanRewriteVlan1.
'translate2To2'
Replace the outermost VLAN tag with
cevcSIVlanRewriteVlan1 and the second VLAN tag with
cevcSIVlanRewriteVlan2."
::= { cevcSIVlanRewriteEntry 4 }
cevcSIVlanRewriteEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
dot1q(1),
dot1ad(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the encapsulation type to
process for the service instance.
'dot1q'
The IEEE 802.1q encapsulation.
'dot1ad'
The IEEE 802.1ad encapsulation."
::= { cevcSIVlanRewriteEntry 5 }
cevcSIVlanRewriteVlan1 OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the outermost VLAN ID tag of the
frame for the service instance. This object is valid
only when cevcSIVlanRewriteAction is 'push1', 'push2',
'translate1To1', 'translate1To2', 'translate2To1', or
'translate2To2'."
::= { cevcSIVlanRewriteEntry 6 }
cevcSIVlanRewriteVlan2 OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the second VLAN ID tag of the
frame for the service instance. This object is valid
only when cevcSIVlanRewriteAction is 'push2',
'translate1To2', or 'translate2To2'."
::= { cevcSIVlanRewriteEntry 7 }
cevcSIVlanRewriteSymmetric OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is valid only when cevcSIVlanRewriteDirection is
'ingress'. The value 'true' of this column specifies that
egress packets are tagged with a VLAN specified by an active
row in cevcSIPrimaryVlanTable.
There could only be one VLAN value assigned in the
cevcSIPrimaryVlanTable, i.e. only one 'active' entry
that has the same index value of cevcSIIndex column and
corresponding instance of cevcSIPrimaryVlanEndingVlan
column has value '0'."
DEFVAL { false }
::= { cevcSIVlanRewriteEntry 8 }
-- Table for EVC layer 2 control protocol processing
cevcSIL2ControlProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIL2ControlProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the layer 2 control protocol processing
attributes at service instances.
This table has an expansion dependent relationship on the
cevcSITable, containing a row for each layer 2
control protocol disposition at each service instance."
::= { cevcServiceInstance 4 }
cevcSIL2ControlProtocolEntry OBJECT-TYPE
SYNTAX CevcSIL2ControlProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents the layer 2 control protocol processing
at a service instance.
The system automatically creates an entry for each layer 2
control protocol type when an entry is created in the
cevcSITable, and entries are automatically destroyed when the
system destroys the corresponding row in the cevcSITable."
INDEX {
cevcSIIndex,
cevcSIL2ControlProtocolType
}
::= { cevcSIL2ControlProtocolTable 1 }
CevcSIL2ControlProtocolEntry ::= SEQUENCE {
cevcSIL2ControlProtocolType CevcL2ControlProtocolType,
cevcSIL2ControlProtocolAction INTEGER
}
cevcSIL2ControlProtocolType OBJECT-TYPE
SYNTAX CevcL2ControlProtocolType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The layer 2 control protocol service frame that the
service instance is to process as defined by object
cevcSIL2ControlProtocolAction."
::= { cevcSIL2ControlProtocolEntry 1 }
cevcSIL2ControlProtocolAction OBJECT-TYPE
SYNTAX INTEGER {
discard(1),
tunnel(2),
forward(3)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The actions to be taken for a given layer 2 control protocol
service frames that matches cevcSIL2ControlProtocolType,
including:
'discard'
The MEN must discard all ingress service frames
carrying the layer 2 control protocol service frames
on the EVC and the MEN must not generate any egress
service frames carrying the layer 2 control protocol
frames on the EVC.
'tunnel'
Forward the layer 2 control protocol service frames
with the MAC address changed as defined by the
individual layer 2 control protocol. The EVC does not
process the layer 2 protocol service frames. If a
layer 2 control protocol service frame is to be
tunneled, all the UNIs in the EVC must be configured to
pass the layer 2 control protocol service frames to the
EVC, cevcPortL2ControlProtocolAction column has the
value of 'passToEvc' or 'peerAndPassToEvc'.
'forward'
Forward the layer 2 conrol protocol service frames as
data; similar to tunnel but layer 2 control protocol
service frames are forwarded without changing the MAC
address."
DEFVAL { discard }
::= { cevcSIL2ControlProtocolEntry 2 }
-- Service Instance CE-VLAN List Table
cevcSICEVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSICEVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the CE-VLAN map list for each Service
Instance.
This table has an expansion dependent relationship on the
cevcSITable, containing a row for each CE-VLAN or a range of
CE-VLANs that are mapped to a service instance."
::= { cevcServiceInstance 5 }
cevcSICEVlanEntry OBJECT-TYPE
SYNTAX CevcSICEVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry contains the CE-VLANs that are mapped at a Service
Instance.
Entries in this table may be created and deleted via the
cevcSICEVlanRowStatus object or the management console on the
system.
Using SNMP, rows are created by a SET request setting the value
of cevcSICEVlanRowStatus column to 'createAndGo' or
'createAndWait'. Rows are deleted by a SET request setting the
value of cevcSICEVlanRowStatus column to 'destroy'."
INDEX {
cevcSIIndex,
cevcSICEVlanBeginningVlan
}
::= { cevcSICEVlanTable 1 }
CevcSICEVlanEntry ::= SEQUENCE {
cevcSICEVlanBeginningVlan VlanId,
cevcSICEVlanRowStatus RowStatus,
cevcSICEVlanStorageType StorageType,
cevcSICEVlanEndingVlan VlanIdOrNone
}
cevcSICEVlanBeginningVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If cevcSICEVlanEndingVlan is '0', then this object
indicates a single VLAN in the list.
If cevcSICEVlanEndingVlan is not '0', then this object
indicates the first VLAN in a range of VLANs."
::= { cevcSICEVlanEntry 1 }
cevcSICEVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSICEVlanTable.
This object cannot be set to 'active' until all objects have
been assigned valid values.
Writable objects in this table can be modified while the
value of the cevcSICEVlanRowStatus column is 'active'."
::= { cevcSICEVlanEntry 2 }
cevcSICEVlanStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSICEVlanEntry 3 }
cevcSICEVlanEndingVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the last VLAN in a range of VLANs. If
the row does not describe a range, then the value of this
column must be '0'."
::= { cevcSICEVlanEntry 4 }
-- Service Instance Match Criteria Table
cevcSIMatchCriteriaTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIMatchCriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the match criteria for each Service
Instance.
This table has an expansion dependent relationship on the
cevcSITable, containing a row for each group of match
criteria of each service instance."
::= { cevcServiceInstance 6 }
cevcSIMatchCriteriaEntry OBJECT-TYPE
SYNTAX CevcSIMatchCriteriaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a group of match criteria for a service
instance. Each entry in the table with the same cevcSIIndex and
different cevcSIMatchCriteriaIndex represents an OR operation of
the match criteria for the service instance.
Entries in this table may be created and deleted via the
cevcSIMatchRowStatus object or the management console on the
system.
Using SNMP, rows are created by a SET request setting the value
of cevcSIMatchRowStatus column to 'createAndGo' or
'createAndWait'. Rows are deleted by a SET request setting the
value of cevcSIMatchRowStatus column to 'destroy'."
INDEX {
cevcSIIndex,
cevcSIMatchCriteriaIndex
}
::= { cevcSIMatchCriteriaTable 1 }
CevcSIMatchCriteriaEntry ::= SEQUENCE {
cevcSIMatchCriteriaIndex Unsigned32,
cevcSIMatchRowStatus RowStatus,
cevcSIMatchStorageType StorageType,
cevcSIMatchCriteriaType INTEGER
}
cevcSIMatchCriteriaIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates an arbitrary integer-value that uniquely
identifies a match criteria for a service instance."
::= { cevcSIMatchCriteriaEntry 1 }
cevcSIMatchRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSIMatchCriteriaTable.
If the value of cevcSIMatchCriteriaType column is 'dot1q(1)'
or 'dot1ad(2)' or 'untaggedAndDot1q' or 'untaggedAndDot1ad,
then cevcSIMatchCriteriaRowStatus can not be set to 'active'
until there exist an active row in the cevcSIMatchEncapTable
with the same index value for cevcSIIndex and
cevcSIMatchCriteriaIndex.
Writable objects in this table can be modified while the
value of the cevcSIMatchRowStatus column is 'active'."
::= { cevcSIMatchCriteriaEntry 2 }
cevcSIMatchStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSIMatchCriteriaEntry 3 }
cevcSIMatchCriteriaType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
dot1q(2),
dot1ad(3),
untagged(4),
untaggedAndDot1q(5),
untaggedAndDot1ad(6),
priorityTagged(7),
defaultTagged(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the criteria used to match a service
instance.
'unknown'
Match criteria for the service instance is not
defined or unknown.
'dot1q'
The IEEE 802.1q encapsulation is used as a match
criteria for the service instance. The ether type
value of the IEEE 802.1q tag is specified by the
object cevcSIEncapEncapsulation with the same
index value of cevcSIIndex and
cevcSIMatchCreriaIndex.
'dot1ad'
The IEEE 802.1ad encapsulation is used as a match
criteria for the service instance. The ether type
value of the IEEE 802.1ad tag is specified by the
cevcSIEncapEncapsulation column with the same index
value of cevcSIIndex and cevcSIMatchCreriaIndex.
'untagged'
Service instance processes untagged service frames.
Only one service instance on the interface/media
type can use untagged frames as a match criteria.
'untaggedAndDot1q'
Both untagged frames and the IEEE 802.1q encapsulation
are used as a match criteria for the service instance.
Only one service instance on the interface/media
type can use untagged frames as a match criteria.
The ether type value of the IEEE 802.1q tag is
specified by the cevcSIEncapEncapsulation column
with the same index value of cevcSIIndex and
cevcSIMatchCreriaIndex.
'untaggedAndDot1ad'
Both untagged frames and the IEEE 802.1ad encapsulation
are used as a match criteria for the service instance.
Only one service instance on the interface/media
type can use untagged frames as a match criteria.
The ether type value of the IEEE 802.1ad tag is
specified by the cevcSIEncapEncapsulation column
with the same index value of cevcSIIndex and
cevcSIMatchCreriaIndex.
'priorityTagged'
Service instance processes priority tagged frames.
Only one service instance on the interface/media
type can use priority tagged frames as a match
criteria.
'defaultTagged'
Service instance is a default service instance. The
default service instance processes frames with VLANs
that do not match to any other service instances
configured on the interface/media type. Only one
service instance on the interface/media type can be
the default service instance."
::= { cevcSIMatchCriteriaEntry 4 }
-- Service Instance Encapsulation Match Criteria Table
cevcSIMatchEncapTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIMatchEncapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the encapulation based match criteria for
each service instance.
This table has a sparse dependent relationship on the
cevcSIMatchCriteriaTable, containing a row for each match
criteria having one of the following values for
cevcSIMatchCriteriaType:
- 'dot1q'
- 'dot1ad'
- 'untaggedAndDot1q'
- 'untaggedAndDot1ad'"
::= { cevcServiceInstance 7 }
cevcSIMatchEncapEntry OBJECT-TYPE
SYNTAX CevcSIMatchEncapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents a group of encapulation match criteria
for a service instance.
Entries in this table may be created and deleted via the
cevcSIMatchEncapRowStatus object or the management console
on the system.
Using SNMP, rows are created by a SET request setting the value
of cevcSIMatchEncapRowStatus column to 'createAndGo' or
'createAndWait'. Rows are deleted by a SET request setting the
value of cevcSIMatchEncapRowStatus column to 'destroy'."
INDEX {
cevcSIIndex,
cevcSIMatchCriteriaIndex
}
::= { cevcSIMatchEncapTable 1 }
CevcSIMatchEncapEntry ::= SEQUENCE {
cevcSIMatchEncapRowStatus RowStatus,
cevcSIMatchEncapStorageType StorageType,
cevcSIMatchEncapValid BITS,
cevcSIMatchEncapEncapsulation INTEGER ,
cevcSIMatchEncapPrimaryCos CiscoCosList,
cevcSIMatchEncapSecondaryCos CiscoCosList,
cevcSIMatchEncapPayloadType INTEGER
}
cevcSIMatchEncapRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSIMatchEncapTable.
This object cannot be set to 'active' until
cevcSIEncapEncapsulation and objects referred by
cevcSIMatchEncapValid have been assigned their respective
valid values.
Writable objects in this table can be modified while the value
of the cevcSIEncapMatchRowStatus column is 'active'."
::= { cevcSIMatchEncapEntry 1 }
cevcSIMatchEncapStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSIMatchEncapEntry 2 }
cevcSIMatchEncapValid OBJECT-TYPE
SYNTAX BITS {
primaryCos(0),
secondaryCos(1),
payloadType(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the encapsulation criteria used to match
a service instance.
'primaryCos'
The 'primaryCos' bit set to '1' specifies the
Class of Service is used as service match criteria for
the service instance. When this bit is set to '1'
there must exist aleast one active rows in the
cevcSIPrimaryVlanTable which has the same index values
of cevcSIIndex and cevcSIMatchCriteriaIndex. When
'primaryCos' bit is '1', the cevcSIPrimaryCos column
indicates the CoS value(s).
'secondaryCos'
The 'secondaryCos' bit set to '1' specifies the
Class of Service is used as service match criteria for
the service instance. When this bit is set to '1'
there must exist aleast one active rows in the
cevcSISecondaryVlanTable which has the same index
values of cevcSIIndex and cevcSIMatchCriteriaIndex.
When 'secondaryCos' bit is '1', the
cevcSISecondaryCos column indicates the CoS
value(s).
'payloadType'
This bit set to '1' specifies that the value of
corresponding instance of cevcSIMatchEncapPayloadType
is used as service match criteria for the service
instance."
::= { cevcSIMatchEncapEntry 3 }
cevcSIMatchEncapEncapsulation OBJECT-TYPE
SYNTAX INTEGER {
dot1qEthertype0x8100(1),
dot1qEthertype0x9100(2),
dot1qEthertype0x9200(3),
dot1qEthertype0x88A8(4),
dot1adEthertype0x88A8(5),
dot1ahEthertype0x88A8(6)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the encapsulation type used as service
match criteria. The object also specifies the Ethertype for
egress packets on the service instance.
'dot1qEthertype0x8100'
The IEEE 801.1q encapsulation with ether type value
0x8100.
'dot1qEthertype0x9100'
The IEEE 801.1q encapsulation with ether type value
0x9100.
'dot1qEthertype0x9200'
The IEEE 801.1q encapsulation with ether type value
0x9200.
'dot1qEthertype0x88A8'
The IEEE 801.1q encapsulation with ether type value
0x88A8.
'dot1adEthertype0x88A8'
The IEEE 801.1ad encapsulation with ether type value
0x88A8.
'dot1ahEthertype0x88A8'
The IEEE 801.1ah encapsulation with ether type value
0x88A8."
::= { cevcSIMatchEncapEntry 4 }
cevcSIMatchEncapPrimaryCos OBJECT-TYPE
SYNTAX CiscoCosList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the CoS values which the Service
Instance uses as service match criteria. This object is valid
only when 'primaryVlans' and 'primaryCos' bits are set to '1'
in corresponding instance of the object
cevcSIMatchEncapValid."
::= { cevcSIMatchEncapEntry 5 }
cevcSIMatchEncapSecondaryCos OBJECT-TYPE
SYNTAX CiscoCosList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the CoS values which the Service
Instance uses as service match criteria. This object is valid
only when 'secondaryVlans' and 'secondaryCos' bits are set to
'1' in corresponding instance of the object
cevcSIMatchEncapValid."
::= { cevcSIMatchEncapEntry 6 }
cevcSIMatchEncapPayloadType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
payloadType0x0800ip(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the PayloadType(etype/protocol type)
values that the service instance uses as a service match
criteria. This object is required when the forwarding of
layer-2 ethernet packet is done through the payloadType i.e IP
etc.
'other'
None of the following.
'payloadType0x0800'
Payload type value for IP is 0x0800.
This object is valid only when 'payloadType' bit is set to '1'
in corresponding instance of the object
cevcSIMatchEncapValid."
::= { cevcSIMatchEncapEntry 7 }
-- Service Instance Primary Vlan List Table
cevcSIPrimaryVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIPrimaryVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the primary VLAN ID list for each Service
Instance.
This table has an expansion dependent relationship on the
cevcSIMatchEncapTable, containing zero or more rows for each
encapsulation match criteria."
::= { cevcServiceInstance 8 }
cevcSIPrimaryVlanEntry OBJECT-TYPE
SYNTAX CevcSIPrimaryVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry specifies a single VLAN or a range of VLANs
contained in the primary VLAN list that's part of the
encapsulation match criteria.
Entries in this table may be created and deleted via the
cevcSIPrimaryVlanRowStatus object or the management console
on the system.
Using SNMP, rows are created by a SET request setting the value
of the cevcSIPrimaryVlanRowStatus column to 'createAndGo' or
'createAndWait'. Rows are deleted by a SET request setting the
value of the cevcSIPrimaryVlanRowStatus column to 'destroy'."
INDEX {
cevcSIIndex,
cevcSIMatchCriteriaIndex,
cevcSIPrimaryVlanBeginningVlan
}
::= { cevcSIPrimaryVlanTable 1 }
CevcSIPrimaryVlanEntry ::= SEQUENCE {
cevcSIPrimaryVlanBeginningVlan VlanId,
cevcSIPrimaryVlanRowStatus RowStatus,
cevcSIPrimaryVlanStorageType StorageType,
cevcSIPrimaryVlanEndingVlan VlanIdOrNone
}
cevcSIPrimaryVlanBeginningVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If cevcSIPrimaryVlanEndingVlan is '0', then this object
indicates a single VLAN in the list.
If cevcSIPrimaryVlanEndingVlan is not '0', then this object
indicates the first VLAN in a range of VLANs."
::= { cevcSIPrimaryVlanEntry 1 }
cevcSIPrimaryVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSIPrimaryVlanTable.
This column cannot be set to 'active' until all objects have
been assigned valid values.
Writable objects in this table can be modified while the
value of the cevcSIPrimaryVlanRowStatus column is 'active'."
::= { cevcSIPrimaryVlanEntry 2 }
cevcSIPrimaryVlanStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSIPrimaryVlanEntry 3 }
cevcSIPrimaryVlanEndingVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the last VLAN in a range of VLANs. If
the row does not describe a range, then the value of this
column must be '0'."
::= { cevcSIPrimaryVlanEntry 4 }
-- Service Instance Secondary Vlan List Table
cevcSISecondaryVlanTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSISecondaryVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the seconadary VLAN ID list for each
service instance.
This table has an expansion dependent relationship on the
cevcSIMatchEncapTable, containing zero or more rows for each
encapsulation match criteria."
::= { cevcServiceInstance 9 }
cevcSISecondaryVlanEntry OBJECT-TYPE
SYNTAX CevcSISecondaryVlanEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry specifies a single VLAN or a range of VLANs
contained in the secondary VLAN list that's part of the
encapsulation match criteria.
Entries in this table may be created and deleted via the
cevcSISecondaryVlanRowStatus object or the management console
on the system.
Using SNMP, rows are created by a SET request setting the value
of the cevcSISecondaryVlanRowStatus column to 'createAndGo' or
'createAndWait'. Rows are deleted by a SET request setting the
value of the cevcSISecondaryVlanRowStatus column to 'destroy'."
INDEX {
cevcSIIndex,
cevcSIMatchCriteriaIndex,
cevcSISecondaryVlanBeginningVlan
}
::= { cevcSISecondaryVlanTable 1 }
CevcSISecondaryVlanEntry ::= SEQUENCE {
cevcSISecondaryVlanBeginningVlan VlanId,
cevcSISecondaryVlanRowStatus RowStatus,
cevcSISecondaryVlanStorageType StorageType,
cevcSISecondaryVlanEndingVlan VlanIdOrNone
}
cevcSISecondaryVlanBeginningVlan OBJECT-TYPE
SYNTAX VlanId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If cevcSISecondaryVlanEndingVlan is '0', then this object
indicates a single VLAN in the list.
If cevcSISecondaryVlanEndingVlan is not '0', then this
object indicates the first VLAN in a range of VLANs."
::= { cevcSISecondaryVlanEntry 1 }
cevcSISecondaryVlanRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSISecondaryVlanTable.
This column can not be set to 'active' until all objects have
been assigned valid values.
Writable objects in this table can be modified while the
value of cevcSISecondaryVlanRowStatus column is 'active'."
::= { cevcSISecondaryVlanEntry 2 }
cevcSISecondaryVlanStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSISecondaryVlanEntry 3 }
cevcSISecondaryVlanEndingVlan OBJECT-TYPE
SYNTAX VlanIdOrNone
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the last VLAN in a range of VLANs. If
the row does not describe a range, then the value of this
column must be '0'."
::= { cevcSISecondaryVlanEntry 4 }
-- Service Instance Forwarding Bridge Domain Table
cevcSIForwardBdTable OBJECT-TYPE
SYNTAX SEQUENCE OF CevcSIForwardBdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the forwarding bridge domain information
for each service instance.
This table has a sparse dependent relationship on the
cevcSITable, containing a row for each service instance having
a cevcSIForwardingType of 'bridgeDomain'."
::= { cevcServiceInstance 10 }
cevcSIForwardBdEntry OBJECT-TYPE
SYNTAX CevcSIForwardBdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entry represents an bridged domain used to forward service
frames by the service instance.
Entries in this table may be created and deleted via the
cevcSIForwardBdRowStatus object or the management console
on the system.
Using SNMP, rows are created by a SET request setting the value
of the cevcSIForwardBdRowStatus column to 'createAndGo' or
'createAndWait'. Rows are deleted by a SET request setting the
value of the cevcSIForwardBdRowStatus column to 'destroy'."
INDEX { cevcSIIndex }
::= { cevcSIForwardBdTable 1 }
CevcSIForwardBdEntry ::= SEQUENCE {
cevcSIForwardBdRowStatus RowStatus,
cevcSIForwardBdStorageType StorageType,
cevcSIForwardBdNumber Unsigned32
}
cevcSIForwardBdRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables a SNMP peer to create, modify, and delete
rows in the cevcSIForwardBdTable.
This column can not be set to 'active' until all objects have
been assigned valid values.
Writable objects in this table can be modified while the
value of the cevcSIForwardBdRowStatus column is 'active'."
::= { cevcSIForwardBdEntry 1 }
cevcSIForwardBdStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies how the SNMP entity stores the data
contained by the corresponding conceptual row.
This object can be set to either 'volatile' or 'nonVolatile'.
Other values are not applicable for this conceptual row and
are not supported."
DEFVAL { volatile }
::= { cevcSIForwardBdEntry 2 }
cevcSIForwardBdNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The bridge domain identifier that is associated with the
service instance.
A bridge domain refers to a layer 2 broadcast domain spanning
a set of physical or virtual ports. Frames are switched within
a bridge domain based on their destination MAC address.
Multicast and unknown destination unicast frames are flooded
within the confines of the bridge domain."
::= { cevcSIForwardBdEntry 3 }
-- Notification Configuration
cevcEvcNotifyEnabled OBJECT-TYPE
SYNTAX BITS {
status(0),
creation(1),
deletion(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the system generation of notification,
including:
'status'
This bit set to '1' specifies the system
generation of cevcEvcStatusChangedNotification.
'creation'
This bit set to '1' specifies the system
generation of cevcEvcCreationNotification.
'deletion'
This bit set to '1' specifices the system
generation of cevcEvcDeletionNotification."
::= { cevcEvcNotificationConfig 1 }
-- Notifications
ciscoEvcNotificationPrefix OBJECT IDENTIFIER
::= { ciscoEvcMIBNotifications 0 }
cevcEvcStatusChangedNotification NOTIFICATION-TYPE
OBJECTS {
cevcEvcOperStatus,
cevcEvcCfgUnis,
cevcEvcActiveUnis
}
STATUS current
DESCRIPTION
"A device generates this notification when an EVC's
operational status changes, or the number of active UNIs
associated with the EVC (cevcNumActiveUnis) changes."
::= { ciscoEvcNotificationPrefix 1 }
cevcEvcCreationNotification NOTIFICATION-TYPE
OBJECTS { cevcEvcOperStatus }
STATUS current
DESCRIPTION
"A device generates this notification upon the creation of an
EVC."
::= { ciscoEvcNotificationPrefix 2 }
cevcEvcDeletionNotification NOTIFICATION-TYPE
OBJECTS { cevcEvcOperStatus }
STATUS current
DESCRIPTION
"A device generates this notification upon the deletion of
an EVC."
::= { ciscoEvcNotificationPrefix 3 }
-- Conformance Information
ciscoEvcMIBCompliances OBJECT IDENTIFIER
::= { ciscoEvcMIBConformance 1 }
ciscoEvcMIBGroups OBJECT IDENTIFIER
::= { ciscoEvcMIBConformance 2 }
ciscoEvcMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The new compliance statement for entities which implement
the CISCO-EVC-MIB."
MODULE -- this module
MANDATORY-GROUPS {
cevcSystemGroup,
cevcPortGroup,
cevcEvcGroup,
cevcSIGroup,
cevcEvcNotificationConfigGroup,
cevcEvcNotificationGroup
}
GROUP cevcSICosMatchCriteriaGroup
DESCRIPTION
"This group is optional for Cos MatchCriteria."
GROUP cevcSIVlanRewriteGroup
DESCRIPTION
"This group is optional for the Vlan Rewrite for Service
Instance."
GROUP cevcSIMatchCriteriaGroup
DESCRIPTION
"This group is optional for the Match Criteria information of
of a service instance."
GROUP cevcSIForwardGroup
DESCRIPTION
"This group is optional for the Forwarding information of
service instance."
OBJECT cevcPortL2ControlProtocolAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcUniIdentifier
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcUniPortType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcUniServiceAttributes
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcEvcIdentifier
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcEvcType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcEvcCfgUnis
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcEvcStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcEvcRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSITargetType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSITarget
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchEncapEncapsulation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchEncapPrimaryCos
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchEncapSecondaryCos
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchEncapPayloadType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIEvcIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIL2ControlProtocolAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIVlanRewriteAction
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIVlanRewriteEncapsulation
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIVlanRewriteVlan1
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIVlanRewriteVlan2
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIVlanRewriteSymmetric
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIVlanRewriteStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIVlanRewriteRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcEvcNotifyEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIForwardingType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSICEVlanRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchCriteriaType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSICEVlanStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIPrimaryVlanRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIPrimaryVlanStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchEncapRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchEncapStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIMatchEncapValid
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSICEVlanEndingVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIPrimaryVlanEndingVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSISecondaryVlanRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSISecondaryVlanStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSISecondaryVlanEndingVlan
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIForwardBdRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIForwardBdStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cevcSIForwardBdNumber
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoEvcMIBCompliances 1 }
-- Units of Conformance
cevcSystemGroup OBJECT-GROUP
OBJECTS {
cevcMaxNumEvcs,
cevcNumCfgEvcs
}
STATUS current
DESCRIPTION
"A collection of objects providing system configuration
of EVCs."
::= { ciscoEvcMIBGroups 1 }
cevcPortGroup OBJECT-GROUP
OBJECTS {
cevcPortMode,
cevcPortMaxNumEVCs,
cevcPortMaxNumServiceInstances,
cevcPortL2ControlProtocolAction,
cevcUniIdentifier,
cevcUniPortType,
cevcUniServiceAttributes,
cevcUniCEVlanEvcEndingVlan
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration
for ports in an EVC."
::= { ciscoEvcMIBGroups 2 }
cevcEvcGroup OBJECT-GROUP
OBJECTS {
cevcEvcIdentifier,
cevcEvcType,
cevcEvcOperStatus,
cevcEvcCfgUnis,
cevcEvcActiveUnis,
cevcEvcStorageType,
cevcEvcRowStatus,
cevcEvcUniId,
cevcEvcUniOperStatus,
cevcEvcLocalUniIfIndex
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration and
status information for EVCs."
::= { ciscoEvcMIBGroups 3 }
cevcSIGroup OBJECT-GROUP
OBJECTS {
cevcSIName,
cevcSITargetType,
cevcSITarget,
cevcSIEvcIndex,
cevcSIRowStatus,
cevcSIStorageType,
cevcSIAdminStatus,
cevcSIOperStatus,
cevcSIL2ControlProtocolAction,
cevcSIVlanRewriteAction,
cevcSIVlanRewriteEncapsulation,
cevcSIVlanRewriteVlan1,
cevcSIVlanRewriteVlan2,
cevcSIVlanRewriteSymmetric,
cevcSIVlanRewriteStorageType,
cevcSIVlanRewriteRowStatus,
cevcSIForwardingType,
cevcSICEVlanRowStatus,
cevcSICEVlanStorageType,
cevcSICEVlanEndingVlan,
cevcSIMatchStorageType,
cevcSIMatchRowStatus,
cevcSIMatchCriteriaType,
cevcSIMatchEncapRowStatus,
cevcSIMatchEncapStorageType,
cevcSIMatchEncapValid,
cevcSIMatchEncapEncapsulation,
cevcSIPrimaryVlanRowStatus,
cevcSIPrimaryVlanStorageType,
cevcSIPrimaryVlanEndingVlan
}
STATUS current
DESCRIPTION
"A collection of objects providing configuration and
match criteria for service instances."
::= { ciscoEvcMIBGroups 4 }
cevcSIVlanRewriteGroup OBJECT-GROUP
OBJECTS {
cevcSIVlanRewriteAction,
cevcSIVlanRewriteEncapsulation,
cevcSIVlanRewriteVlan1,
cevcSIVlanRewriteVlan2,
cevcSIVlanRewriteSymmetric,
cevcSIVlanRewriteStorageType,
cevcSIVlanRewriteRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects which provides VLAN rewrite
information for a service instance."
::= { ciscoEvcMIBGroups 5 }
cevcSICosMatchCriteriaGroup OBJECT-GROUP
OBJECTS {
cevcSIMatchEncapPrimaryCos,
cevcSIMatchEncapSecondaryCos
}
STATUS current
DESCRIPTION
"A collection of objects which provides CoS match criteria
for a service instance."
::= { ciscoEvcMIBGroups 6 }
cevcSIMatchCriteriaGroup OBJECT-GROUP
OBJECTS {
cevcSIMatchRowStatus,
cevcSIMatchStorageType,
cevcSIMatchCriteriaType,
cevcSIMatchEncapRowStatus,
cevcSIMatchEncapStorageType,
cevcSIMatchEncapValid,
cevcSIMatchEncapEncapsulation,
cevcSIMatchEncapPrimaryCos,
cevcSIMatchEncapSecondaryCos,
cevcSIMatchEncapPayloadType,
cevcSIPrimaryVlanRowStatus,
cevcSIPrimaryVlanStorageType,
cevcSIPrimaryVlanEndingVlan,
cevcSISecondaryVlanRowStatus,
cevcSISecondaryVlanStorageType,
cevcSISecondaryVlanEndingVlan
}
STATUS current
DESCRIPTION
"A collection of objects providing match criteria information
for service instances."
::= { ciscoEvcMIBGroups 7 }
cevcSIForwardGroup OBJECT-GROUP
OBJECTS {
cevcSIForwardingType,
cevcSIForwardBdRowStatus,
cevcSIForwardBdStorageType,
cevcSIForwardBdNumber
}
STATUS current
DESCRIPTION
"A collection of objects providing service frame forwarding
information for service instances."
::= { ciscoEvcMIBGroups 8 }
cevcEvcNotificationConfigGroup OBJECT-GROUP
OBJECTS { cevcEvcNotifyEnabled }
STATUS current
DESCRIPTION
"A collection of objects for configuring notification
of this MIB."
::= { ciscoEvcMIBGroups 9 }
cevcEvcNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
cevcEvcStatusChangedNotification,
cevcEvcCreationNotification,
cevcEvcDeletionNotification
}
STATUS current
DESCRIPTION
"A collection of notifications that this MIB module is
required to implement."
::= { ciscoEvcMIBGroups 10 }
END
Reference in New Issue View Git Blame Copy Permalink