MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-DOT11-HT-PHY-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1205 lines
45 KiB
Plaintext
Raw Blame History

-- *******************************************************************
-- CISCO-DOT11-HT-PHY-MIB.my: DOT11 HT PHY MIB
-- July 2006, Prasanna Viswakumar
--
-- Copyright (c) 2006-2007 by Cisco Systems, Inc.
-- *******************************************************************
CISCO-DOT11-HT-PHY-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
ifIndex
FROM IF-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoDot11HtPhyMIB MODULE-IDENTITY
LAST-UPDATED "200612110000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems,
Customer Service
Postal: 170 West Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
Email: cs-wnbu-snmp@cisco.com"
DESCRIPTION
"This MIB is intended to be implemented on Cisco's
WLAN devices that provide the wired uplink to wireless
clients through the high-throughput dot11 radios
compliant to the 802.11n specification.
The MIB describes the PHY layer parameters of the
802.11n compliant radio interfaces.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
A-MPDU
An aggregated format that consists of several MAC
Protocol Data Units being aggregated and transmitted
in one PHY Service Data Unit.
A-MSDU
An aggregated format that consists of several MAC
Service Data Units being aggregated and transmitted
in one MAC Protocol Data Unit.
Block-Ack
This refers to the acknowledgement done for all the
MPDUs in an A-MDPU.
Basic Service Set ( BSS )
The IEEE 802.11 BSS of an AP comprises of the
stations directly associating with the AP.
CSI
Channel State Information
Clear Channel Assessment ( CCA )
A technique to assess the availability of the
channel for communication purposes.
Dual CTS
Clear-To-Send control frame is sent by the receiver
in response to the Request-To-Send (RTS) control
frame from the sender to virtually reserve the
wireless medium for data transfer.
Dual CTS mechanism is used by the AP to reserve the
wireless medium for wireless devices that do not
support STBC.
Green Field
A mode of operation where high-throughput 802.11n
frames are transmitted without a legacy compatible
part.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. Mobile Node
and client are used interchangeably.
Modulation and Coding Scheme ( MCS )
This is a value that determines the modulation, coding and
number of spatial channels. Each scheme specifies the
modulation technique, coding rate , number of spatial
streams etc and the corresponding data rate.
Multiple Input Multiple Output ( MIMO )
This technique advocates sending and receiving data
communication signals through multiple antennas. MIMO
uses the multiple streams to transmit more information
and recombine the signal at the receiving end. This
brings more reliability and significant gain over the
traditional antenna systems.
PLCP
PHY Layer Convergence Protocol
PMD
Physical Medium Dependent
Power Save Multi-Poll ( PSMP )
A MAC control frame that schedules the transmissions
and receptions of PSMP devices.
Phased Coexistence Operation ( PCO )
A BSS mode with alternating 20MHz and 40MHz phases of
operation controlled by a PCO AP.
PHY Protocol Data Unit ( PPDU )
Unit of data transfer at PHY level.
Short-Guard Interval ( SG )
Space-Time Block Coding ( STBC )
By this technique, a wireless device transmits several
copies of a data stream across a series of antennas
so that the receiver can use the various received
portions of the data signal to improve reliability of
data transfer.
Reduced Inter-Frame Space ( RIFS )
A time interval between multiple transmissions of a
single transmitter used to reduce overhead and
increase network efficiency.
Zero Length Frame ( ZLF )
A PPDU carrying a PSDU of zero-length.
REFERENCE
[1] Part 11. Wireless LAN Medium Access Control ( MAC )
and Physical Layer ( PHY ) Specifications: Enhancements
for Higher Throughput
[2] Enhanced Wireless Consortium MAC Specification,
v1.24
[3] Enhanced Wireless Consortium PHY Specification,
v1.27
[4] IEEE802dot11-MIB "
REVISION "200612110000Z"
DESCRIPTION
"Initial version of this MIB module. "
::= { ciscoMgmt 607 }
ciscoDot11HtPhyMIBNotifs OBJECT IDENTIFIER
::= { ciscoDot11HtPhyMIB 0 }
ciscoDot11HtPhyMIBObjects OBJECT IDENTIFIER
::= { ciscoDot11HtPhyMIB 1 }
ciscoDot11HtPhyMIBConform OBJECT IDENTIFIER
::= { ciscoDot11HtPhyMIB 2 }
cD11HtPhy OBJECT IDENTIFIER
::= { ciscoDot11HtPhyMIBObjects 1 }
-- ********************************************************************
-- TEXTUAL CONVENTION
-- ********************************************************************
CD11HtPhyBeamformFeedback ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This textual convention represents the Beamforming
feedback characteristics. The semantics are as
follows.
'unsolicited' - The 802.11n interface can provide
unsolicited feedback.
'immediate' - The 802.11n interface can provide
immediate feedback.
'aggregated' - The 802.11n interface can provide
an aggregated feedback.
If none of these bits are set, it indicates that the
802.11n interface is incapable of providing the
feedback. "
SYNTAX BITS {
unsolicited (0),
immediate (1),
aggregated (2)
}
-- ********************************************************************
-- HT PHY Antenna Table
-- ********************************************************************
cD11HtPhyAntennaTable OBJECT-TYPE
SYNTAX SEQUENCE OF CD11HtPhyAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the antennas connected to
the 802.11n interface.
Entries in this table are created automatically
by the agent corresponding to each 802.11n
radio interface.
There exists in this table, an entry corresponding
to each entry in dot11PhyOperationTable where
dot11PHYType equals 'ht'(7). "
::= { cD11HtPhy 1 }
cD11HtPhyAntennaEntry OBJECT-TYPE
SYNTAX CD11HtPhyAntennaEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
cD11HtPhyAntennaTable and describes the antennas
connected to the 802.11n interface. "
INDEX { ifIndex }
::= { cD11HtPhyAntennaTable 1 }
CD11HtPhyAntennaEntry ::=
SEQUENCE {
cD11HtPhyAntennaSelectionImplemented TruthValue,
cD11HtPhyXmitExpCSIFdbkASImplemented TruthValue,
cD11HtPhyXmitIndFdbkASImplemented TruthValue,
cD11HtPhyExplCSIFdbkASImplemented TruthValue,
cD11HtPhyXmitIndCompFdbkASImplemented TruthValue,
cD11HtPhyRcvAntennaSelImplemented TruthValue,
cD11HtPhyXmitSoundPPDUImplemented TruthValue
}
cD11HtPhyAntennaSelectionImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when 'true', indicates that
antenna selection is supported on this 802.11n
interface. "
DEFVAL { false }
::= { cD11HtPhyAntennaEntry 1 }
cD11HtPhyXmitExpCSIFdbkASImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when 'true', indicates that
transmit Antenna Selection based on explicit CSI
feedback is supported on this 802.11n interface. "
DEFVAL { false }
::= { cD11HtPhyAntennaEntry 5 }
cD11HtPhyXmitIndFdbkASImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when 'true', indicates that the
transmit antenna selection based on antenna indices
feedback is supported on this 802.11n interface. "
DEFVAL { false }
::= { cD11HtPhyAntennaEntry 6 }
cD11HtPhyExplCSIFdbkASImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when 'true', indicates that the
computation of CSI and feedback to support the peer to
do antenna selection is supported on this 802.11n
interface. "
DEFVAL { false }
::= { cD11HtPhyAntennaEntry 7 }
cD11HtPhyXmitIndCompFdbkASImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is set to 'true' to indicate that the
transmit antenna selection based on antenna indices
selection computation and feedback the results to
support the peer to do antenna selection is supported
on this 802.11n interface. "
DEFVAL { false }
::= { cD11HtPhyAntennaEntry 8 }
cD11HtPhyRcvAntennaSelImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is set to 'true' to indicate that the
receive antenna selection is supported on this
802.11n interface. "
DEFVAL { false }
::= { cD11HtPhyAntennaEntry 9 }
cD11HtPhyXmitSoundPPDUImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object when set to 'true', indicates that the
transmission of sounding PPDUs is supported on the
802.11n interface. "
DEFVAL { false }
::= { cD11HtPhyAntennaEntry 10 }
-- *********************************************************************
-- * 802.11nPhy HT TABLE
-- *********************************************************************
cD11HtPhyTable OBJECT-TYPE
SYNTAX SEQUENCE OF CD11HtPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the physical layer parameters
of the 802.11n radio interface.
Entries in this table are created automatically
by the agent corresponding to each 802.11n
interface.
There exists in this table, an entry corresponding
to each entry in dot11PhyOperationTable where
dot11PHYType equals 'ht'(7). "
::= { cD11HtPhy 2 }
cD11HtPhyEntry OBJECT-TYPE
SYNTAX CD11HtPhyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
cD11HtPhyTable and corresponds to the support
available for the various high-throughput
capabilities on an 802.11n interface. "
INDEX { ifIndex }
::= { cD11HtPhyTable 1 }
CD11HtPhyEntry ::= SEQUENCE {
cD11HtPhyOperatingMode INTEGER,
cD11HtPhyOperModeFrequency INTEGER,
cD11HtPhyOperBand INTEGER,
cD11HtPhyFortyMHzOperationImplemented TruthValue,
cD11HtPhyFortyMHzOperationEnabled TruthValue,
cD11HtPhyCurrentControlChannel Unsigned32,
cD11HtPhyCurrentExtensionChannel INTEGER,
cD11HtPhyExtChannelCCAImplemented TruthValue,
cD11HtPhyNumberOfSpatialStreamsImplemented INTEGER,
cD11HtPhyNumberOfSpatialStreamsEnabled INTEGER,
cD11HtPhyGreenFieldImplemented TruthValue,
cD11HtPhyGreenFieldEnabled TruthValue,
cD11HtPhyShortGIInTwentyImplemented TruthValue,
cD11HtPhyShortGIInTwentyEnabled TruthValue,
cD11HtPhyShortGIInFortyImplemented TruthValue,
cD11HtPhyShortGIInFortyEnabled TruthValue,
cD11HtPhyAdvancedCodingImplemented TruthValue,
cD11HtPhyAdvancedCodingEnabled TruthValue,
cD11HtPhyTxSTBCImplemented TruthValue,
cD11HtPhyTxSTBCEnabled TruthValue,
cD11HtPhyRxSTBCImplemented TruthValue,
cD11HtPhyRxSTBCEnabled TruthValue,
cD11HtPhyBeamFormingImplemented TruthValue,
cD11HtPhyBeamFormingEnabled TruthValue
}
cD11HtPhyOperatingMode OBJECT-TYPE
SYNTAX INTEGER {
legacy(1),
mixed(2),
greenField(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the mode of operation of
802.11n interface at the physical layer. The
semantics are as follows.
legacy - In this mode, packets are transmitted
in the legacy 802.11a/g format.
mixed - In this mode, packets are transmitted
with a preamble that can be recognized by the
legacy 802.11a/g devices. Both mixed mode and
legacy packets can be recognised by the receiving
802.11n interface.
greenField - In this mode, a transmitting station
won't add a preamble to the packets sent. "
::= { cD11HtPhyEntry 1 }
cD11HtPhyOperModeFrequency OBJECT-TYPE
SYNTAX INTEGER {
legacyMode(1),
htMode(2),
dupLegacyMode(3),
fortyMHzUpperMode(4),
fortyMHzLowerMode(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the channel characteristics
of the PHY. The semantics are as follows.
legacyMode - The radio channel characteristics are the
same as that of 802.11a/802.11g radios.
htMode - The radio operates in either 40MHz
bandwidth with one to four spatial streams.
dupLegacyMode - The radio operates in a 40MHz
channel composed of 2 adjacent 20MHz channels.
The packets sent are in the legacy 802.11a format
in each of the 20MHz channels.
fortyMHzUpperMode - The radio tranmits a legacy or
HT packet in the upper 20MHz channel of a 40MHz
channel.
fortyMHzLowerMode - The radio transmits a legacy or
HT packet in the lower 20MHz channel of a 40MHz
channel. "
::= { cD11HtPhyEntry 2 }
cD11HtPhyOperBand OBJECT-TYPE
SYNTAX INTEGER {
band24GHz(1),
band5GHz(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the frequency band an
802.11n radio operates in. The semantics are
as follows.
24GHz - The radio operates in the 2.4GHz frequency
band.
5GHz - The radio operates in the 5 GHz frequency
band. "
::= { cD11HtPhyEntry 3 }
cD11HtPhyFortyMHzOperationImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
40 MHz operation is implemented. "
DEFVAL { false }
::= { cD11HtPhyEntry 4 }
cD11HtPhyFortyMHzOperationEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object , when set to 'true', indicates that
the 40 MHz Operation is enabled. "
DEFVAL { false }
::= { cD11HtPhyEntry 5 }
cD11HtPhyCurrentControlChannel OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the operating channel.
If 40 MHz mode is currently in use then this
object indicates the control channel. "
::= { cD11HtPhyEntry 6 }
cD11HtPhyCurrentExtensionChannel OBJECT-TYPE
SYNTAX INTEGER {
noExtension(1),
extensionAbove(2),
extensionBelow(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object represents the channel extension
offset. The semantics are as follows.
noExtension - No extension channel is present and
the radio operates in the 20MHz mode.
extensionAbove - The extension channel is above the
control channel. This is applicable only if the
radio operates in the 40MHz mode.
extensionBelow - The extension channel is below the
control channel. This is applicable only if the
radio operates in the 40MHz mode. "
::= { cD11HtPhyEntry 7 }
cD11HtPhyExtChannelCCAImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to true, indicates that
making a CCA on the extension channel is supported. "
DEFVAL { false }
::= { cD11HtPhyEntry 8 }
cD11HtPhyNumberOfSpatialStreamsImplemented OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum number of
spatial streams implemented. "
DEFVAL { 2 }
::= { cD11HtPhyEntry 9 }
cD11HtPhyNumberOfSpatialStreamsEnabled OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the maximum number of
spatial streams enabled. "
DEFVAL { 2 }
::= { cD11HtPhyEntry 10 }
cD11HtPhyGreenFieldImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Greenfield option is implemented. "
DEFVAL { false }
::= { cD11HtPhyEntry 11 }
cD11HtPhyGreenFieldEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Greenfield option is enabled. "
DEFVAL { false }
::= { cD11HtPhyEntry 12 }
cD11HtPhyShortGIInTwentyImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Short-Guard option is implemented for 20 MHz
operation. "
DEFVAL { false }
::= { cD11HtPhyEntry 13}
cD11HtPhyShortGIInTwentyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Short Guard option is enabled for 20 MHz operation. "
DEFVAL { false }
::= { cD11HtPhyEntry 14 }
cD11HtPhyShortGIInFortyImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Short Guard option is implemented for 40 MHz
operation. "
DEFVAL { false }
::= { cD11HtPhyEntry 15 }
cD11HtPhyShortGIInFortyEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Short Guard option is enabled for 40 MHz operation. "
DEFVAL { false }
::= { cD11HtPhyEntry 16 }
cD11HtPhyAdvancedCodingImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Advanced Coding option is implemented. "
DEFVAL { false }
::= { cD11HtPhyEntry 17 }
cD11HtPhyAdvancedCodingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Advanced Coding option is enabled. "
DEFVAL { false }
::= { cD11HtPhyEntry 18 }
cD11HtPhyTxSTBCImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that
the entity is capable of transmitting frames using
Space-Time Block Code (STBC) option. "
DEFVAL { false }
::= { cD11HtPhyEntry 19 }
cD11HtPhyTxSTBCEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that
the entity's capability of transmitting frames using
Space-Time Block Code (STBC) option is enabled. "
DEFVAL { false }
::= { cD11HtPhyEntry 20 }
cD11HtPhyRxSTBCImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
entity is capable of receiving frames that are sent
using the Space-Time Block Code (STBC). "
DEFVAL { false }
::= { cD11HtPhyEntry 21 }
cD11HtPhyRxSTBCEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
entity's capability of receiving frames that are
sent using the Space-Time Block Code (STBC) is
enabled. "
DEFVAL { false }
::= { cD11HtPhyEntry 22 }
cD11HtPhyBeamFormingImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
Beam Forming option is implemented. "
DEFVAL { false }
::= { cD11HtPhyEntry 23 }
cD11HtPhyBeamFormingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
BeamForming option is enabled. "
DEFVAL { false }
::= { cD11HtPhyEntry 24 }
-- *********************************************************************
-- * End of 802.11n PHY HT TABLE
-- *********************************************************************
-- *********************************************************************
-- * 802.11nSupported MCS TABLE
-- *********************************************************************
cD11HtPhySupportedMCSTable OBJECT-TYPE
SYNTAX SEQUENCE OF CD11HtPhySupportedMCSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the transmit and receive MCS
supported by the PLCP and PMD, represented by a count
from 0 to 127, subject to limitations of each
individual PHY.
Entries in this table are created automatically
by the agent corresponding to each 802.11n
compliant interface.
There exists in this table, an entry corresponding
to each entry in dot11PhyOperationTable where
dot11PHYType equals 'ht'(7). "
::= { cD11HtPhy 3 }
cD11HtPhySupportedMCSEntry OBJECT-TYPE
SYNTAX CD11HtPhySupportedMCSEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
cD11HtPhySupportedMCSTable and describes the transmit
and receive MCS supported on this 802.11n
interface. "
INDEX { ifIndex }
::= { cD11HtPhySupportedMCSTable 1 }
CD11HtPhySupportedMCSEntry ::=
SEQUENCE {
cD11HtPhySupportedMCSTxValue OCTET STRING,
cD11HtPhySupportedMCSRxValue OCTET STRING
}
cD11HtPhySupportedMCSTxValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Transmit MCS supported by
the PLCP and PMD. "
::= { cD11HtPhySupportedMCSEntry 1 }
cD11HtPhySupportedMCSRxValue OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(1..127))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the Receive MCS supported by
the PLCP and PMD. "
::= { cD11HtPhySupportedMCSEntry 2 }
-- *********************************************************************
-- * End of 802.11n Supported MCS TABLE
-- *********************************************************************
-- *********************************************************************
-- * 802.11nTx BF Config TABLE
-- *********************************************************************
cD11HtPhyTxBFConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CD11HtPhyTxBFConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the Transmit BeamForming
capabilities of an 802.11n interface.
Entries in this table are created automatically
by the agent corresponding to each 802.11n interface.
There exists in this table, an entry corresponding
to each entry in dot11PhyOperationTable where
dot11PHYType equals 'ht'(7). "
::= { cD11HtPhy 4 }
cD11HtPhyTxBFConfigEntry OBJECT-TYPE
SYNTAX CD11HtPhyTxBFConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
cD11HtPhyTxBFConfigTable and corresponds to the
Beamforming capabilities of an 802.11n interface. "
INDEX { ifIndex }
::= { cD11HtPhyTxBFConfigTable 1 }
CD11HtPhyTxBFConfigEntry ::=
SEQUENCE {
cD11HtPhyRxStaggerSoundImplemented TruthValue,
cD11HtPhyTxStaggerSoundImplemented TruthValue,
cD11HtPhyRxZLFImplemented TruthValue,
cD11HtPhyTxZLFImplemented TruthValue,
cD11HtPhyImplicitTxBFImplemented TruthValue,
cD11HtPhyCalibrationImplemented INTEGER,
cD11HtPhyExplCSITxBFImplemented TruthValue,
cD11HtPhyExplUncompSteerMatrixImplemented TruthValue,
cD11HtPhyExplBFCSIFdbkImplemented
CD11HtPhyBeamformFeedback,
cD11HtPhyExplUncompSteerMatrixFdbkImplemented
CD11HtPhyBeamformFeedback,
cD11HtPhyExplCompSteerMatrixFdbkImplemented
CD11HtPhyBeamformFeedback,
cD11HtPhyNumberBeamFormingCSISupportAntenna INTEGER,
cD11HtPhyNumberUncompSteerMatrixSupportAntenna INTEGER,
cD11HtPhyNumberCompSteerMatrixSupportAntenna INTEGER
}
cD11HtPhyRxStaggerSoundImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
implementation supports the receiving of staggered
sounding frames. "
DEFVAL { false }
::= { cD11HtPhyTxBFConfigEntry 1 }
cD11HtPhyTxStaggerSoundImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
implementation supports the transmission of
staggered sounding frames. "
DEFVAL { false }
::= { cD11HtPhyTxBFConfigEntry 2 }
cD11HtPhyRxZLFImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
implementation is capable of receiving ZLF as
sounding frames. "
DEFVAL { false }
::= { cD11HtPhyTxBFConfigEntry 3 }
cD11HtPhyTxZLFImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
implementation is capable of transmitting ZLF
as sounding frames. "
DEFVAL { false }
::= { cD11HtPhyTxBFConfigEntry 4 }
cD11HtPhyImplicitTxBFImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that the
implementation is capable of applying implicit transmit
beamforming. "
DEFVAL { false }
::= { cD11HtPhyTxBFConfigEntry 5 }
cD11HtPhyCalibrationImplemented OBJECT-TYPE
SYNTAX INTEGER {
inCapable (1),
unableToInitiate (2),
ableToInitiate (3),
fullyCapable (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the level of calibration
supported by the implementation. The semantics
are follows.
'inCapable' - This station can't participate in a
calibration procedure initiated by another station.
'unableToInitiate' - This station can involve in
calibration, but cannot apply reciprocity correction
vector received from the initiator and cannot
initiate calibration.
'ableToInitiate' - This station can initiate
calibration but cannot apply reciprocity correction
vector received from the initiator.
'fullyCapable' - This statin can participate in a
calibration procedure initiated by another station,
can respond to a Sounding PPDU and provide a MIMO
channel measurement report in response to the
receipt of a Sounding PPDU. The station can also
apply reciprocity correction vector received from
the initiator of calibration response. "
DEFVAL { inCapable }
::= { cD11HtPhyTxBFConfigEntry 6 }
cD11HtPhyExplCSITxBFImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that
implementation is capable of applying transmit
beamforming using CSI explicit feedback in its
transmission. "
DEFVAL { false }
::= { cD11HtPhyTxBFConfigEntry 7 }
cD11HtPhyExplUncompSteerMatrixImplemented OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object, when set to 'true', indicates that
implementation is capable of applying transmit
beamforming using uncompressed steering matrix
explicit feedback in its transmission. "
DEFVAL { false }
::= { cD11HtPhyTxBFConfigEntry 8 }
cD11HtPhyExplBFCSIFdbkImplemented OBJECT-TYPE
SYNTAX CD11HtPhyBeamformFeedback
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the level of CSI explicit
feedback supported by the implementation. "
::= { cD11HtPhyTxBFConfigEntry 9 }
cD11HtPhyExplUncompSteerMatrixFdbkImplemented OBJECT-TYPE
SYNTAX CD11HtPhyBeamformFeedback
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the level of uncompressed
steering matrix explicit feedback supported by
the implementation. "
::= { cD11HtPhyTxBFConfigEntry 10 }
cD11HtPhyExplCompSteerMatrixFdbkImplemented OBJECT-TYPE
SYNTAX CD11HtPhyBeamformFeedback
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the level of uncompressed
steering matrix explicit feedback returned by the
implementation. "
::= { cD11HtPhyTxBFConfigEntry 11 }
cD11HtPhyNumberBeamFormingCSISupportAntenna OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of
beamform antennas the beamformee can support when CSI
feedback is required. "
::= { cD11HtPhyTxBFConfigEntry 12 }
cD11HtPhyNumberUncompSteerMatrixSupportAntenna OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of
beamform antennas the beamformee can support when
uncompressed steering matrix feedback is required. "
::= { cD11HtPhyTxBFConfigEntry 13 }
cD11HtPhyNumberCompSteerMatrixSupportAntenna OBJECT-TYPE
SYNTAX INTEGER (1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the maximum number of
beamform antennas the beamformee can support when
compressed steering matrix feedback is required. "
::= { cD11HtPhyTxBFConfigEntry 14 }
--********************************************************************
--* EWC Power level objects
--********************************************************************
cD11HtPhyEnhPowerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CD11HtPhyEnhPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the transmission power
characteristics specific to 802.11n radio interfaces.
There exists in this table, an entry corresponding
to each entry in dot11PhyOperationTable where
dot11PHYType equals 'ht'(7). "
::= { cD11HtPhy 5 }
cD11HtPhyEnhPowerEntry OBJECT-TYPE
SYNTAX CD11HtPhyEnhPowerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents a conceptual row in
ccD11HtPhyEnhPowerTable and describes the
transmission power characteristics specific to a
802.11n radio. "
INDEX { ifIndex }
::= { cD11HtPhyEnhPowerTable 1 }
CD11HtPhyEnhPowerEntry ::=
SEQUENCE {
cD11HtPhyEnhPowerLevel20MHz Unsigned32,
cD11HtPhyEnhPowerLevel40MHz Unsigned32
}
cD11HtPhyEnhPowerLevel20MHz OBJECT-TYPE
SYNTAX Unsigned32(0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the power level of the
802.11n radio when operating at 20 MHz. A value
of 0 indicates that the power level couldn't be
determined at the time the agent is queried for
an instance of this object. "
::= { cD11HtPhyEnhPowerEntry 1 }
cD11HtPhyEnhPowerLevel40MHz OBJECT-TYPE
SYNTAX Unsigned32(0..10)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the power level of the
802.11n radio when operating at 40 MHz. A value
of 0 indicates that the power level couldn't be
determined at the time the agent is queried for
an instance of this object. "
::= { cD11HtPhyEnhPowerEntry 2 }
--********************************************************************
--* Compliance statements
--********************************************************************
ciscoDot11HtPhyMIBCompliances OBJECT IDENTIFIER
::= { ciscoDot11HtPhyMIBConform 1 }
ciscoDot11HtPhyMIBGroups OBJECT IDENTIFIER
::= { ciscoDot11HtPhyMIBConform 2 }
ciscoDot11HtMacCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the SNMP entities that
implement the ciscoDot11HtPhyMIB module. "
MODULE MANDATORY-GROUPS {
ciscoDot11HtPhyAntennaGroup,
ciscoDot11HtPhyConfigGroup,
ciscoDot11HtPhyMcsGroup,
ciscoDot11HtPhyTxBfGroup,
ciscoDot11HtPhyEnhPowerLevelsGroup
}
::= { ciscoDot11HtPhyMIBCompliances 1 }
--********************************************************************
--* Units of conformance
--********************************************************************
ciscoDot11HtPhyAntennaGroup OBJECT-GROUP
OBJECTS {
cD11HtPhyAntennaSelectionImplemented,
cD11HtPhyXmitExpCSIFdbkASImplemented,
cD11HtPhyXmitIndFdbkASImplemented,
cD11HtPhyExplCSIFdbkASImplemented,
cD11HtPhyXmitIndCompFdbkASImplemented,
cD11HtPhyRcvAntennaSelImplemented,
cD11HtPhyXmitSoundPPDUImplemented
}
STATUS current
DESCRIPTION
"This collection of objects represent the
antennae-related parameters. "
::= { ciscoDot11HtPhyMIBGroups 1 }
ciscoDot11HtPhyConfigGroup OBJECT-GROUP
OBJECTS {
cD11HtPhyOperatingMode,
cD11HtPhyOperModeFrequency,
cD11HtPhyOperBand,
cD11HtPhyFortyMHzOperationImplemented,
cD11HtPhyFortyMHzOperationEnabled,
cD11HtPhyCurrentControlChannel,
cD11HtPhyCurrentExtensionChannel,
cD11HtPhyExtChannelCCAImplemented,
cD11HtPhyNumberOfSpatialStreamsImplemented,
cD11HtPhyNumberOfSpatialStreamsEnabled,
cD11HtPhyGreenFieldImplemented,
cD11HtPhyGreenFieldEnabled,
cD11HtPhyShortGIInTwentyImplemented,
cD11HtPhyShortGIInTwentyEnabled,
cD11HtPhyShortGIInFortyImplemented,
cD11HtPhyShortGIInFortyEnabled,
cD11HtPhyAdvancedCodingImplemented,
cD11HtPhyAdvancedCodingEnabled,
cD11HtPhyTxSTBCImplemented,
cD11HtPhyTxSTBCEnabled,
cD11HtPhyRxSTBCImplemented,
cD11HtPhyRxSTBCEnabled,
cD11HtPhyBeamFormingImplemented,
cD11HtPhyBeamFormingEnabled
}
STATUS current
DESCRIPTION
"This collection of objects represent the
operating parameters of the 802.11n radio at
the physical layer. "
::= { ciscoDot11HtPhyMIBGroups 2 }
ciscoDot11HtPhyMcsGroup OBJECT-GROUP
OBJECTS {
cD11HtPhySupportedMCSTxValue,
cD11HtPhySupportedMCSRxValue
}
STATUS current
DESCRIPTION
"This collection of objects represent the
MCS rates supported by the 802.11n radio. "
::= { ciscoDot11HtPhyMIBGroups 3 }
ciscoDot11HtPhyTxBfGroup OBJECT-GROUP
OBJECTS {
cD11HtPhyRxStaggerSoundImplemented,
cD11HtPhyTxStaggerSoundImplemented,
cD11HtPhyRxZLFImplemented,
cD11HtPhyTxZLFImplemented,
cD11HtPhyImplicitTxBFImplemented,
cD11HtPhyCalibrationImplemented,
cD11HtPhyExplCSITxBFImplemented,
cD11HtPhyExplUncompSteerMatrixImplemented,
cD11HtPhyExplBFCSIFdbkImplemented,
cD11HtPhyExplUncompSteerMatrixFdbkImplemented,
cD11HtPhyExplCompSteerMatrixFdbkImplemented,
cD11HtPhyNumberBeamFormingCSISupportAntenna,
cD11HtPhyNumberUncompSteerMatrixSupportAntenna,
cD11HtPhyNumberCompSteerMatrixSupportAntenna
}
STATUS current
DESCRIPTION
"This collection of objects represent the transmit
BeamForming configuration on an 802.11n radio. "
::= { ciscoDot11HtPhyMIBGroups 4 }
ciscoDot11HtPhyEnhPowerLevelsGroup OBJECT-GROUP
OBJECTS {
cD11HtPhyEnhPowerLevel20MHz,
cD11HtPhyEnhPowerLevel40MHz
}
STATUS current
DESCRIPTION
"This collection of objects represents the
transmission power characteristics specific to
a 802.11n radio. "
::= { ciscoDot11HtPhyMIBGroups 5 }
--********************************************************************
--* End of units of conformance
--********************************************************************
END
Reference in New Issue View Git Blame Copy Permalink