MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-24 19:07:24 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
ed8874abb3
snmp_mib_archive/CISCO-CFS-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1911 lines
66 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-CFS-MIB.my: Cisco Fabric Service MIB
--
-- September 2004, John Fan, Sanjeev C Joshi, H K Vivek,
--
-- Copyright (c) 2004, 2005, 2006 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-CFS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TimeStamp
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoCFSMIB MODULE-IDENTITY
LAST-UPDATED "200606130000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Network Management Technology Group
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"This MIB applies to one or more of a set of devices
which have connectivity through some kind of 'fabric'.
Many features which run in such an environment require
the exchange of information between the peer devices
which participate in providing the feature. An example
of the type of information exchanged is configuration
information. It would be advantageous to have the ability
to have configuration for a feature done on one device
and propagated to all other devices in the fabric.
Cisco Fabric Service (CFS) is a general mechanism for
data distribution within the fabric that could be used
by most features.
A feature supported in a device may or may not be CFS
capable. In case a feature is CFS capable, the control
of the CFS operations are instrumented through this MIB.
A CFS capable feature can be enabled for data
distribution within the fabric by the user via SNMP.
When a CFS capable feature is enabled for data
distribution, CFS operations can then be performed for
that particular feature.
As part of the CFS configuration the first mandatory step
is to explicitly enable the feature for data distribution.
This enabling of distribution for a feature needs to be
done for those devices in the fabric where the distribution
is intended. Following this mandatory step, feature specific
configurations can be instrumented in the respective MIBs.
Once a feature is enabled for data distribution, first
subsequent feature specific configuration SET operation
results in a snapshot of current 'Running Configuration'
of the feature, on the local device. This snapshot is used
for subsequent modifications by feature specific SET
operations. Such modified configuration is referred to as
'Pending Configuration'. There can only be one 'Pending
Configuration' in the fabric. Additionally, such 'Pending
Configuration' can be maintained within the context of
additional scope, specific to the respective features.
The user who initiates the creation of the 'Pending
Configuration' is its owner. When a 'Pending Configuration'
for a feature exists in one of the devices of the fabric,
an attempt to create a 'Pending Configuration' for the same
feature and on a different device by way of feature specific
SET operation results in an error. This means feature
specific SET operations intended for distribution can only
be performed on the device that has the 'Pending
Configuration' with it. This ensures data consistency for
distribution.
Once the configuration of a feature is ready to be
distributed to all devices connected to the fabric, a
'commit' action performed on the local device overwrites
the local 'Running Configuration' and then distributes the
new local 'Running Configuration' to all other devices in
the fabric. The successful 'commit' action also results into
destroying of the 'Pending Configuration' and makes the
feature available for new distribution. Any attempt to
perform 'commit' without any modification results in to an
error. The 'commit' action can only be performed by the
owner of the 'Pending Configuration'.
The 'Pending Configuration' can optionally be destroyed
without any distribution. This can be done by using either
'abort' or 'clear' action. The 'abort' action needs to
performed only on that device where the 'Pending
Configuration' exists and can only be performed by the owner
of the 'Pending Configuration'. The 'clear' action can be
initiated through any of the devices in the fabric. The
successful 'abort' or 'clear' operation makes the feature
available for new distribution.
The CFS, in addition to providing the basic distribution
infrastructure to the CFS capable features in a stable
fabric, also provides infrastructure to handle data
distribution when two stable fabrics merge.
This MIB module is to facilitate the global level control
(enabling/disabling) and actions (commit/abort/clear) over
the CFS capable features in the system.
Glossary of the terms used in this MIB:
--------------------------------------
VSAN - Virtual Storage Area Network,
similar to a VLAN.
CFS feature Scope - The scope of distribution.
The scope provides the context
within which the CFS actions
are performed on a CFS capable
feature.
CFS Fabric Merge - The merging of two stable fabrics.
The CFS provides infrastructure
to handle data distribution for
CFS distribution enabled features
when the two stable fabrics merge.
CFS control and actions :
CFS Distribution Enable - This is to enable data distribution
for CFS capable feature.
CFS Distribution Disable - This is to disable data
distribution for CFS capable
feature.
CFS Commit - This is to commit the 'Pending
Configuration' on the local device.
This action triggers the
distribution of the 'Pending
Configuration' to all the devices
in the fabric.
CFS Abort - This is to Destroy the 'Pending
Configuration' on the local device
without any distribution. Once
local 'Pending Configuration' is
destroyed, creation of 'Pending
Configuration' in the local or any
other device connected to the
fabric is allowed.
CFS Clear - This is to Destroy the 'Pending
Configuration' that exists in any
of the device in the fabric. Once
'Pending Configuration' that exists
with one of the devices in the
fabric is destroyed, creation of
'Pending Configuration' in the
local or any other device connected
to the fabric is allowed.
"
REVISION "200606130000Z"
DESCRIPTION
"Added cfsFeatureOpExtLastActionTime object to cfsFeatureOpExtTable
Added cfsFeatureOpExtGroupRev1
Added ciscoCFSMIBComplianceRev3
"
REVISION "200511300000Z"
DESCRIPTION
"Added the following:
- cfsDistCtrlTable table
- cfsFeatureOpAttribs object to cfsFeatureOpTable
"
REVISION "200504270000Z"
DESCRIPTION
"Added an enumeration value of 'partialSuccess'
to the 'CiscoCFSFeatureActionResult' TC.
"
REVISION "200412240000Z"
DESCRIPTION
"Added the cfsDistCtrl object to control
the CFS distribution capability.
"
REVISION "200412030000Z"
DESCRIPTION
"Added the following tables:
- cfsMergeMembersTable
- cfsPeersTable
- cfsFeaturePeersTable
- cfsFeatureOpExtTable
Added the following scalar objects:
- cfsStartPeersDiscovery
- cfsPeersDiscoveryResult
- cfsPeersDiscoveryFailureReason
Added additional enumerations for:
- cfsMergeStatusValue
Added notification:
- ciscoCFSDiscoveryCompleteNotif
"
REVISION "200409150000Z"
DESCRIPTION
"Initial version of this MIB.
"
::= { ciscoMgmt 433 }
--
-- Objects, Notifications & Conformances
--
ciscoCFSMIBNotifs OBJECT IDENTIFIER
::= { ciscoCFSMIB 0 }
ciscoCFSMIBObjects OBJECT IDENTIFIER
::= { ciscoCFSMIB 1 }
ciscoCFSMIBConformance OBJECT IDENTIFIER
::= { ciscoCFSMIB 2 }
cfsFeature OBJECT IDENTIFIER
::= { ciscoCFSMIBObjects 1 }
cfsNotifObjects OBJECT IDENTIFIER
::= { ciscoCFSMIBObjects 2 }
cfsDiscoveryObjects OBJECT IDENTIFIER
::= { ciscoCFSMIBObjects 3 }
cfsDistCtrlObjects OBJECT IDENTIFIER
::= { ciscoCFSMIBObjects 4 }
--
-- Textual Conventions
--
CiscoCFSAction ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Actions available for the CFS.
'noop' - No operation
'enable' - CFS Distribution Enable
'disable' - CFS Distribution Disable
'commit' - CFS Commit
'abort' - CFS Abort
'clear' - CFS Clear. This can be initiated by any
user who has write access to the object
of 'CiscoCFSAction' type.
"
SYNTAX INTEGER {
noop(1),
enable(2),
disable(3),
commit(4),
abort(5),
clear(6)
}
CiscoCFSFeatureStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Status of the CFS capable feature.
'unknown' - Unknown status
'enabled' - Feature is enabled for CFS operations
'disabled' - Feature is disabled for any CFS operations
"
SYNTAX INTEGER {
unknown(1),
enabled(2),
disabled(3)
}
CiscoCFSFeatureActionResult ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Result of the action performed on a CFS capable feature.
'none' - No previous action was performed
'success' - Execution of the action triggered
is completed Successfully
'failed' - Execution of the action has failed
'inProgress' - Execution of the action triggered
is in progress
'partialSuccess' - Execution of the action triggered has
succeeded partially in the fabric
"
SYNTAX INTEGER {
none(1),
success(2),
failed(3),
inProgress(4),
partialSuccess(5)
}
CiscoCFSScopeType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A generic value that represents the type of CFS
feature scope.
'none' - No scope
'vsanID' - VSAN scope
"
SYNTAX INTEGER {
none(1),
vsanID(2)
}
CiscoCFSScopeValue ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a CFS feature scope value to be used with
CiscoCFSScopeType. A CiscoCFSScopeValue is always
interpreted within the context of an CiscoCFSScopeType
value. Every usage of the CiscoCFSScopeValue textual
convention is required to specify the CiscoCFSScopeType
object which provides the context.
The encoding of the CiscoCFSScopeValue object for a
specific scope type is as below:
ScopeType Octets Contents Encoding
--------- ------ -------- --------
vsanID 1-4 VSAN ID of the VSAN network-byte order
"
SYNTAX OCTET STRING (SIZE (0..255))
cfsFeatureOpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsFeatureOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all the CFS capable features in the local
device.
The table provides control, actions, current operating
state information and last action result information for
CFS capable features.
Each entry in this table represents a CFS capable feature.
An entry in the table is created by the agent when CFS
capable feature registers with CFS infrastructure. The
agent removes the entry from the table when the CFS
capable de-registers with CFS infrastructure. Management
application can not create new entry in this table.
"
::= { cfsFeature 1 }
cfsFeatureOpEntry OBJECT-TYPE
SYNTAX CfsFeatureOpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cfsFeatureOpTable. Each row
represents a CFS capable feature in the system.
"
INDEX { cfsFeatureOpName }
::= { cfsFeatureOpTable 1}
CfsFeatureOpEntry ::=
SEQUENCE {
cfsFeatureOpName SnmpAdminString,
cfsFeatureOpAction CiscoCFSAction,
cfsFeatureOpScopeType CiscoCFSScopeType,
cfsFeatureOpScopeVal CiscoCFSScopeValue,
cfsFeatureOpLastAction CiscoCFSAction,
cfsFeatureOpLastScopeType CiscoCFSScopeType,
cfsFeatureOpLastScopeVal CiscoCFSScopeValue,
cfsFeatureOpLastActionResult CiscoCFSFeatureActionResult,
cfsFeatureOpLastFailureReason SnmpAdminString,
cfsFeatureOpShowCfgOption INTEGER,
cfsFeatureOpStatus CiscoCFSFeatureStatus,
cfsFeatureOpAttribs BITS
}
cfsFeatureOpName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A human readable string value uniquely identifying the
name of this feature.
"
::= { cfsFeatureOpEntry 1 }
cfsFeatureOpAction OBJECT-TYPE
SYNTAX CiscoCFSAction
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CFS action to be triggered for the feature. An operator
should successfully enable CFS distribution of a feature
by issuing an 'enable' action before performing a
'commit' or 'abort' operation.
The value of this object and the values of corresponding
instance of cfsFeatureOpScopeType and cfsFeatureOpScopeVal
are interpreted and applied together as single CFS action
trigger on the feature. The scope type and values provide
the context/scope within which the this action is applied.
Setting of this object will fail with 'inconsistentValue',
if the value of the corresponding instance of
cfsFeatureOpLastActionResult is 'inProgress'. However, the
value of this object can be set to 'clear' regardless of
the value of the corresponding instance of
cfsFeatureOpLastActionResult.
Retrieving the value of this object via SNMP will always
return 'noop'.
"
::= { cfsFeatureOpEntry 2 }
cfsFeatureOpScopeType OBJECT-TYPE
SYNTAX CiscoCFSScopeType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object specifies the type of the value
of the corresponding instance of cfsFeatureOpScopeVal.
The agent is not required to retain the modified value of
this object across the agent restart.
"
DEFVAL { none }
::= { cfsFeatureOpEntry 3 }
cfsFeatureOpScopeVal OBJECT-TYPE
SYNTAX CiscoCFSScopeValue (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The CFS feature scope value to be used with
cfsFeatureOpScopeType.
The value of this object may not be relevant when the value
of the corresponding instance of cfsFeatureOpAction is SET
to 'enable' or 'disable'.
The agent is not required to retain the modified value of
this object across the agent restart.
"
DEFVAL { ''H }
::= { cfsFeatureOpEntry 4 }
cfsFeatureOpLastAction OBJECT-TYPE
SYNTAX CiscoCFSAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last action performed on this feature. If no action
has been triggered for the feature since the last reboot
of the system, then retrieving the value of this object
will return 'noop'.
"
::= { cfsFeatureOpEntry 5 }
cfsFeatureOpLastScopeType OBJECT-TYPE
SYNTAX CiscoCFSScopeType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last CFS feature scope type used for
cfsFeatureOpLastAction. If no action has been triggered
for the feature since the last reboot of the system, then
retrieving the value of this object will return 'none'.
"
::= { cfsFeatureOpEntry 6 }
cfsFeatureOpLastScopeVal OBJECT-TYPE
SYNTAX CiscoCFSScopeValue (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last CFS feature scope value used for
cfsFeatureOpLastScopeType. If no action has been triggered
for the feature since the last reboot of the system, then
retrieving the value of this object will return zero-length
string.
"
::= { cfsFeatureOpEntry 7 }
cfsFeatureOpLastActionResult OBJECT-TYPE
SYNTAX CiscoCFSFeatureActionResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the execution of the last action (represented
by the value of cfsFeatureOpLastAction) for the feature.
When the value of this object is 'actionInProgress', the
value of the corresponding instance of cfsFeatureOpAction
can not be modified.
"
::= { cfsFeatureOpEntry 8 }
cfsFeatureOpLastFailureReason OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason description for the failed execution
of last action performed on this feature.
If the corresponding instance of
cfsFeatureOpLastActionResult has the value
'actionFailed', then this object contains the reason
as to why it failed. Otherwise, the value of this
object is the zero-length string.
"
::= { cfsFeatureOpEntry 9 }
cfsFeatureOpShowCfgOption OBJECT-TYPE
SYNTAX INTEGER {
runningConfig(1),
pendingConfig(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"This object provides a means for management
applications to either view the contents of 'Running
Configuration' or 'Pending Configuration'.
When the value of this object is 'runningConfig', all the
subsequent configuration retrieval for this feature will be
from 'Running Configuration' on the local device.
When the value of this object is 'pendingConfig', all the
subsequent configuration retrieval for this feature will be
from 'Pending Configuration' on the local device.
The value of this object is meaningful only when the value
of the corresponding instance of 'cfsFeatureOpStatus' is
'enabled'.
The agent is not required to retain the modified value of
this object across the agent restart.
"
DEFVAL { runningConfig }
::= { cfsFeatureOpEntry 10 }
cfsFeatureOpStatus OBJECT-TYPE
SYNTAX CiscoCFSFeatureStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operating status of the feature.
"
::= { cfsFeatureOpEntry 11 }
cfsFeatureOpAttribs OBJECT-TYPE
SYNTAX BITS {
fcFabric(0),
ipNetwork(1),
vsanScope(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object represents the attributes of
a CFS capable feature as registered with the CFS
infrastructure.
'fcFabric' - indicates that the CFS based
distribution for a feature spans the
entire FC (Fibre Channel) fabric
'ipNetwork' - indicates that the CFS based
distribution for a feature spans the
entire IP network
'vsanScope' - indicates that the CFS based
distribution for a feature is done
on per VSAN basis and restricted to a
specific VSAN in a FC (Fibre Channel)
fabric
"
::= { cfsFeatureOpEntry 12 }
cfsPendingConfOwnerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsPendingConfOwnerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains per-feature 'Pending Configuration'
owner information. This table will have entries only
for those features for which 'Pending Configuration'
exists in one of the devices in the fabric. This table
provides the 'Pending Configuration' owner (type and name)
information and Device address where the 'Pending
Configuration' exists in the fabric.
The 'Pending Configuration' owner details are per CFS
capable feature within a specific scope.
"
::= { cfsFeature 2 }
cfsPendingConfOwnerEntry OBJECT-TYPE
SYNTAX CfsPendingConfOwnerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the 'cfsPendingConfOwnerTable'.
Each row represents a CFS capable feature within the
context of the combination of scope type and scope value
in the system.
"
INDEX { cfsFeatureOpName,
cfsPendingConfOwnerScopeType,
cfsPendingConfOwnerScopeVal }
::= { cfsPendingConfOwnerTable 1}
CfsPendingConfOwnerEntry ::=
SEQUENCE {
cfsPendingConfOwnerScopeType CiscoCFSScopeType,
cfsPendingConfOwnerScopeVal CiscoCFSScopeValue,
cfsPendingConfOwnerAddrType InetAddressType,
cfsPendingConfOwnerAddr InetAddress,
cfsPendingConfOwnerIDType BITS,
cfsPendingConfOwnerID SnmpAdminString
}
cfsPendingConfOwnerScopeType OBJECT-TYPE
SYNTAX CiscoCFSScopeType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the type of the cfsPendingConfOwnerScopeVal.
"
::= { cfsPendingConfOwnerEntry 1 }
cfsPendingConfOwnerScopeVal OBJECT-TYPE
SYNTAX CiscoCFSScopeValue (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CFS scope value used with cfsPendingConfOwnerScopeType.
This indicates the scope of the feature within which
the 'Pending Configuration' for the feature exists.
"
::= { cfsPendingConfOwnerEntry 2 }
cfsPendingConfOwnerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address of the device in the fabric where the
'Pending Configuration' exists for the feature within this
scope.
"
::= { cfsPendingConfOwnerEntry 3 }
cfsPendingConfOwnerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the device in the fabric where the 'Pending
Configuration' exists for the feature within this scope.
The type of address of an instance of this object is
determined by the value of the corresponding instance of
cfsPendingConfOwnerAddrType.
"
::= { cfsPendingConfOwnerEntry 4 }
cfsPendingConfOwnerIDType OBJECT-TYPE
SYNTAX BITS {
other(0),
snmpCommunityName(1),
snmpv3SecurityName(2),
cliLoginName(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object indicates the type of the value
of the corresponding instance of 'cfsPendingConfOwnerID':
'other' - indicates that the value of
'cfsPendingConfOwnerID' is
other than any of the enumerations
defined
'snmpCommunityName' - indicates that the value of
'cfsPendingConfOwnerID' is
'snmpCommunityName' of SNMPv1/
SNMPv2c
'snmpv3SecurityName' - indicate that the value of
'cfsPendingConfOwnerID' is
'securityName' of SNMPv3 user
'cliLoginName' - indicates that the value of
'cfsPendingConfOwnerID' is
CLI 'User Login Name' of CLI user
"
REFERENCE
" - 'securityName' is defined in RFC 3411, section 3.2.2
- 'snmpCommunityName' as defined in RFC3584
"
::= { cfsPendingConfOwnerEntry 5 }
cfsPendingConfOwnerID OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A human readable string representing the identity of the
owner of the 'Pending Configuration' that exists in the
device represented by the values of corresponding instance
of cfsPendingConfOwnerAddrType and cfsPendingConfOwnerAddr.
The value of the corresponding instance of
cfsPendingConfOwnerIDType indicates the type of the value
of this object.
"
::= { cfsPendingConfOwnerEntry 6 }
cfsMergeStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsMergeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides status of the 'Fabric Merge' on
the CFS capable features within the context of a
scope.
This table will have entries only for those features
for which CFS fabric distribution is enabled and
'Fabric Merge' is supported.
"
::= { cfsFeature 3 }
cfsMergeStatusEntry OBJECT-TYPE
SYNTAX CfsMergeStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cfsMergeStatusTable.
Each row represents a CFS capable feature within the
context of the combination of scope type and scope value
in the system.
"
INDEX { cfsFeatureOpName,
cfsMergeStatusScopeType,
cfsMergeStatusScopeVal }
::= { cfsMergeStatusTable 1}
CfsMergeStatusEntry ::=
SEQUENCE {
cfsMergeStatusScopeType CiscoCFSScopeType,
cfsMergeStatusScopeVal CiscoCFSScopeValue,
cfsMergeStatusValue INTEGER
}
cfsMergeStatusScopeType OBJECT-TYPE
SYNTAX CiscoCFSScopeType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the type of the cfsMergeStatusScopeVal.
"
::= { cfsMergeStatusEntry 1 }
cfsMergeStatusScopeVal OBJECT-TYPE
SYNTAX CiscoCFSScopeValue (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CFS scope value used with cfsMergeStatusScopeType.
This indicates the scope of the feature within which
the 'Fabric Merge' for the feature has occurred.
"
::= { cfsMergeStatusEntry 2 }
cfsMergeStatusValue OBJECT-TYPE
SYNTAX INTEGER {
success(1),
inProgress(2),
failure(3),
waiting(4),
other(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the last 'Fabric Merge' for the feature
within the context of the combination of
'cfsMergeStatusScopeType' and 'cfsMergeStatusScopeVal'
in the system:
'success' - Fabric Merge successfully
completed
'inProgress' - Fabric Merge in progress
'failure' - Fabric Merge failed
'waiting' - Waiting for existing Merge
conflict to be cleared
'other' - None of the other values of
this enumeration
The value of this object is 'inProgress' when the local
device is part of a fabric that is in the process of
merging with another fabric.
The value of this object is 'waiting' when this local
device is waiting for any existing 'Fabric Merge
Conflict' to be resolved before it initiates the new
instance of 'Fabric Merge'.
"
::= { cfsMergeStatusEntry 3 }
cfsMergeMembersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsMergeMembersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides a list of devices in the local/
remote fabric after 'Fabric Merge' on a per CFS capable
feature basis within the context of a scope.
This table will have entries only for those features
for which CFS fabric distribution is enabled and
'Fabric Merge' is supported.
"
::= { cfsFeature 4 }
cfsMergeMembersEntry OBJECT-TYPE
SYNTAX CfsMergeMembersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the 'cfsMergeMembersTable'.
Each row represents a device in the local/remote
fabric supporting CFS capable feature within the
context of a scope in the system.
"
INDEX { cfsFeatureOpName,
cfsMergeStatusScopeType,
cfsMergeStatusScopeVal,
cfsMergeMemberAddrType,
cfsMergeMemberAddr }
::= { cfsMergeMembersTable 1}
CfsMergeMembersEntry ::=
SEQUENCE {
cfsMergeMemberAddrType InetAddressType,
cfsMergeMemberAddr InetAddress,
cfsMergeMemberFabricType INTEGER,
cfsMergeMemberRole INTEGER
}
cfsMergeMemberAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address of the device in the fabric
which has participated in the 'Fabric Merge' within
the context of a CFS feature and scope.
"
::= { cfsMergeMembersEntry 1 }
cfsMergeMemberAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the device in the fabric which has
participated in the 'Fabric Merge' within the context
of a CFS feature and scope.
The type of address of an instance of this object is
determined by the value of the corresponding instance
of cfsMergeMemberAddrType.
"
::= { cfsMergeMembersEntry 2 }
cfsMergeMemberFabricType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
local(2),
remote(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the fabric to which the device belongs to,
during/after the 'Fabric Merge'.
The fabric to which the local device is attached to is
referred to as 'local fabric'. The fabric which attempted
to merge with the local fabric is referred to as 'remote
fabric'.
When the value of the corresponding instance of
cfsMergeStatusValue is 'successful' or 'waiting', all
the devices will be in a single 'CFS fabric' and belong
to the 'local' fabric.
When the value of the corresponding instance of
cfsMergeStatusValue is 'failure' or 'inProgress', the
devices in the other fabric which attempted 'Fabric Merge'
are marked as 'remote'.
"
::= { cfsMergeMembersEntry 3 }
cfsMergeMemberRole OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
master(2),
peer(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The role of the device during the 'Fabric Merge'.
In case of a successful fabric merge/stable fabric
only one device can be a 'master'. In case of a
fabric merge failure, there can be multiple 'master'
devices, corresponding to each of the fabric fragments.
All other devices which are not 'master' assume the role
of a 'peer'.
The algorithm for the selection of the 'Merge Master'
device within a stable fabric is platform specific.
"
::= { cfsMergeMembersEntry 4 }
cfsStartPeersDiscovery OBJECT-TYPE
SYNTAX INTEGER {
startDiscovery(1),
noOp(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether a discovery cycle
should be started by the CFS to discover all the
'peers' in the fabric.
When the value of this object is set to 'startDiscovery',
the discovery of the CFS capable devices in the fabric
is started by the CFS. On successful completion of the
discovery, the entries in the 'cfsPeersTable' will be
populated.
When the value of cfsPeersDiscoveryResult is
'inProgress', setting the value of this object to
'startDiscovery' results in an error.
No action is taken if this object is set to 'noOp'.
The value of this object when read is always 'noOp'.
"
::= { cfsDiscoveryObjects 1 }
cfsPeersDiscoveryResult OBJECT-TYPE
SYNTAX INTEGER {
notInitiated(1),
inProgress(2),
successful(3),
failed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the result of the last discovery
command issued by way of setting the value of
cfsStartPeersDiscovery to 'startDiscovery'.
When the CFS discovery was never initiated using the
cfsStartPeersDiscovery, the value of this object is
'notInitiated'.
When the value of this object is 'notInitiated', the
management station needs initiate the discovery cycle by
setting the value of cfsStartPeersDiscovery to
'startDiscovery'.
If the value of this object is 'successful', then the
cfsPeersTable is appropriately populated.
"
::= { cfsDiscoveryObjects 2 }
cfsPeersDiscoveryFailureReason OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason description for the last failed CFS
peers discovery.
If the value of cfsPeersDiscoveryResult object has the
value 'failed', then the value of this object contains
the reason as to why it failed. Otherwise, the value
of this object is a zero-length string.
"
::= { cfsDiscoveryObjects 3 }
cfsPeersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides list of devices in a stable fabric.
This table is populated with the entries only when the
CFS discovery cycle is successfully completed.
"
::= { cfsFeature 5 }
cfsPeersEntry OBJECT-TYPE
SYNTAX CfsPeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the 'cfsPeersTable'. Each row
represents a device in a stable fabric supporting
CFS capability.
"
INDEX { cfsPeerAddrType,
cfsPeerAddr }
::= { cfsPeersTable 1}
CfsPeersEntry ::=
SEQUENCE {
cfsPeerAddrType InetAddressType,
cfsPeerAddr InetAddress
}
cfsPeerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address of the CFS capable device
in the fabric.
"
::= { cfsPeersEntry 1 }
cfsPeerAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of a CFS capable device in the fabric.
The type of address of an instance of this object is
determined by the value of the corresponding instance of
cfsPeerAddrType.
"
::= { cfsPeersEntry 2 }
cfsFeaturePeersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsFeaturePeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table provides list of devices in a stable
fabric on per CFS capable feature basis.
"
::= { cfsFeature 6 }
cfsFeaturePeersEntry OBJECT-TYPE
SYNTAX CfsFeaturePeersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the 'cfsMergeMembersTable'.
Each row represents a device in a stable fabric
supporting CFS capable feature within the context
of a scope in the system.
"
INDEX { cfsFeatureOpName,
cfsFeaturePeersScopeType,
cfsFeaturePeersScopeVal,
cfsFeaturePeersAddrType,
cfsFeaturePeersAddr }
::= { cfsFeaturePeersTable 1}
CfsFeaturePeersEntry ::=
SEQUENCE {
cfsFeaturePeersScopeType CiscoCFSScopeType,
cfsFeaturePeersScopeVal CiscoCFSScopeValue,
cfsFeaturePeersAddrType InetAddressType,
cfsFeaturePeersAddr InetAddress
}
cfsFeaturePeersScopeType OBJECT-TYPE
SYNTAX CiscoCFSScopeType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the type of the cfsFeaturePeersScopeVal.
"
::= { cfsFeaturePeersEntry 1 }
cfsFeaturePeersScopeVal OBJECT-TYPE
SYNTAX CiscoCFSScopeValue (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CFS scope value used with cfsFeaturePeersScopeType.
This indicates the scope of the feature within which
the device exists in the fabric.
"
::= { cfsFeaturePeersEntry 2 }
cfsFeaturePeersAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of the address of a peer device in the
fabric for a CFS capable feature within the context
of a scope.
"
::= { cfsFeaturePeersEntry 3 }
cfsFeaturePeersAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of a peer device in the fabric for a CFS
capable feature within the context of a scope.
The type of address of an instance of this object is
determined by the value of the corresponding instance of
cfsFeaturePeersAddrType.
"
::= { cfsFeaturePeersEntry 4 }
cfsFeatureOpExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsFeatureOpExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all the CFS capable features in the local
device and provides:
- the information of the result of the last CFS action
triggered on the CFS capable feature within the context
of a scope
- control flag to specify the source of 'configuration
view', within the context of a scope of the CFS capable
feature
The last action corresponds to the action triggered on a
CFS capable feature using the cfsFeatureOpAction of the
cfsFeatureOpTable.
"
::= { cfsFeature 7 }
cfsFeatureOpExtEntry OBJECT-TYPE
SYNTAX CfsFeatureOpExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cfsFeatureOpExtTable. Each row
represents a CFS capable feature within the context of
the combination of scope type and scope value in the
system.
The combination of cfsFeatureOpExtScopeType and
cfsFeatureOpExtScopeVal forms a scope context within
which a CFS operation was performed on CFS capable
feature using the cfsFeatureOpScopeType and
cfsFeatureOpScopeVal of cfsFeatureOpTable.
"
INDEX { cfsFeatureOpName,
cfsFeatureOpExtScopeType,
cfsFeatureOpExtScopeVal }
::= { cfsFeatureOpExtTable 1}
CfsFeatureOpExtEntry ::=
SEQUENCE {
cfsFeatureOpExtScopeType CiscoCFSScopeType,
cfsFeatureOpExtScopeVal CiscoCFSScopeValue,
cfsFeatureOpExtLastAction CiscoCFSAction,
cfsFeatureOpExtLastActionResult CiscoCFSFeatureActionResult,
cfsFeatureOpExtLastFailureReason SnmpAdminString,
cfsFeatureOpExtShowCfgOption INTEGER,
cfsFeatureOpExtLastActionTime TimeStamp
}
cfsFeatureOpExtScopeType OBJECT-TYPE
SYNTAX CiscoCFSScopeType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the type of the cfsFeatureOpExtScopeVal.
"
::= { cfsFeatureOpExtEntry 1 }
cfsFeatureOpExtScopeVal OBJECT-TYPE
SYNTAX CiscoCFSScopeValue (SIZE(0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The CFS feature scope value to be used with
cfsFeatureOpExtScopeType.
"
::= { cfsFeatureOpExtEntry 2 }
cfsFeatureOpExtLastAction OBJECT-TYPE
SYNTAX CiscoCFSAction
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last action performed on this feature within the
context of a scope. If no action has been triggered
for the feature since the last reboot of the system,
then retrieving the value of this object will return
'noop'.
"
::= { cfsFeatureOpExtEntry 3 }
cfsFeatureOpExtLastActionResult OBJECT-TYPE
SYNTAX CiscoCFSFeatureActionResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the execution of the last action (represented
by the value of cfsFeatureOpExtLastAction) for the feature.
"
::= { cfsFeatureOpExtEntry 4 }
cfsFeatureOpExtLastFailureReason OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failure reason description for the failed execution
of last action performed on this feature.
If the corresponding instance of
cfsFeatureOpExtLastActionResult has the value
'actionFailed', then this object contains the reason
as to why it failed. Otherwise, the value of this
object is a zero-length string.
"
::= { cfsFeatureOpExtEntry 5 }
cfsFeatureOpExtShowCfgOption OBJECT-TYPE
SYNTAX INTEGER {
runningConfig(1),
pendingConfig(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object provides a means for management
applications to either view the contents of 'Running
Configuration' or 'Pending Configuration'.
When the value of this object is 'runningConfig', all the
subsequent configuration retrieval for this feature within
the specified context of the scope will be from 'Running
Configuration' on the local device.
When the value of this object is 'pendingConfig', all the
subsequent configuration retrieval for this feature within
the specified context of the scope will be from 'Pending
Configuration' on the local device.
The value of this object is meaningful only when the value
of the corresponding instance of 'cfsFeatureOpStatus' is
'enabled'.
The agent is not required to retain the modified value of
this object across the agent restart.
"
DEFVAL { runningConfig }
::= { cfsFeatureOpExtEntry 6 }
cfsFeatureOpExtLastActionTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time stamp of the last action performed. If no action
has been triggered for the feature (i.e cfsFeatureOpExtLastAction
equal to one '1') since the last reboot of the system, the value
zero will be returned.
"
::= { cfsFeatureOpExtEntry 7 }
cfsDistCtrl OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The object to control CFS for distribution.
On setting the value of this object to 'enable', CFS will
be ready for distribution of the data across the fabric.
On setting the value of this object to 'disable', CFS will
disable its capability to distribute the data across the
fabric. The CFS continues to honour distribution requests
from the CFS capable features of the local device, with the
scope of the distribution limited only to the local device
and not fabric wide.
The value of the object when read, reflects the current
operating state of the CFS.
"
::= { cfsDistCtrlObjects 1 }
cfsDistCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CfsDistCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table to control CFS for distribution over IP.
"
::= { cfsDistCtrlObjects 2 }
cfsDistCtrlEntry OBJECT-TYPE
SYNTAX CfsDistCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in the cfsDistCtrlTable. Each row
represents a configuration set required to control CFS for
distribution over IP on each of the address families.
"
INDEX { cfsDistCtrlAddrType }
::= { cfsDistCtrlTable 1 }
CfsDistCtrlEntry ::=
SEQUENCE {
cfsDistCtrlAddrType InetAddressType,
cfsDistCtrlAddr InetAddress,
cfsDistCtrlAction INTEGER
}
cfsDistCtrlAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of multicast address to which the CFS distribution
is restricted. Only the entries corresponding to the 'ipv4'
and 'ipv6' internet address types exist in this table.
"
::= { cfsDistCtrlEntry 1 }
cfsDistCtrlAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The multicast address domain to which the CFS distribution
is restricted.
The type of this address is determined by the instance
identifier value of the cfsDistCtrlAddrType.
There is a default multicast address for both IPv4 and IPv6
through which the Keep-alive messages are sent and received
to discover the CFS capable switches over IP. All switches
with similar multicast address form one CFS-over-IP fabric.
The default multicast address for IPv4 is 239.255.70.83 and
range supported is [239.255.0.0 - 239.255.255.255]
The default multicast address for IPv6 is ff13::7743:4653 and
the supported range is [ff13::0000:0000 - ff13::ffff:ffff]
The value of this object can only be modified when the
value of the corresponding instance of cfsDistCtrlAction is
'disable'.
"
::= { cfsDistCtrlEntry 2 }
cfsDistCtrlAction OBJECT-TYPE
SYNTAX INTEGER { enable(1), disable(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the current operating
mode employed in CFS for distribution over the
corresponding type of Internet address.
By setting the value of this object to 'enable', CFS will
enable its capability to distribute the application data
across the fabric over the corresponding type of Internet
address.
By setting the value of this object to 'disable', CFS will
disable its capability to distribute the data across the
fabric over the corresponding type of Internet address.
Only one instance of this object can have the value of
'enable' among all the conceptual rows.
"
DEFVAL { disable }
::= { cfsDistCtrlEntry 3 }
--
-- Objects for Notification only
--
cfsMergeFailFeatureName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"A human readable string value uniquely identifying the
name of this feature for which the 'Merge Failure' occurred.
"
::= { cfsNotifObjects 1 }
cfsMergeFailScopeType OBJECT-TYPE
SYNTAX CiscoCFSScopeType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object indicates the type of the value
of 'cfsMergeFailScopeVal'.
"
::= { cfsNotifObjects 2 }
cfsMergeFailScopeVal OBJECT-TYPE
SYNTAX CiscoCFSScopeValue (SIZE(0..32))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The value of this object indicates the scope of the
feature ('cfsMergeFailFeatureName') within which the
'Merge Failure' occurred.
"
::= { cfsNotifObjects 3 }
cfsMergeFailReasonDescription OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The failure reason description for the 'Merge Failure'"
::= { cfsNotifObjects 4 }
--
-- Notifications
--
ciscoCFSFeatureActionNotif NOTIFICATION-TYPE
OBJECTS { cfsFeatureOpLastAction,
cfsFeatureOpLastScopeType,
cfsFeatureOpLastScopeVal,
cfsFeatureOpLastActionResult }
STATUS current
DESCRIPTION
"Notification to covey the information of the action
performed on a CFS capable feature.
This notification gets generated when :
- a CFS operation action is triggered on CFS capable
feature
- the result of last action performed on the CFS
capable feature changes.
The 'cfsFeatureOpLastActionResult' indicates the new
value of the last action result performed on the feature.
"
::= { ciscoCFSMIBNotifs 1 }
ciscoCFSMergeFailNotif NOTIFICATION-TYPE
OBJECTS { cfsMergeFailFeatureName,
cfsMergeFailScopeType,
cfsMergeFailScopeVal,
cfsMergeFailReasonDescription }
STATUS current
DESCRIPTION
"Notification to convey the information of the 'Merge
Failure' occurred in the fabric. This notification gets
generated when the merge of the two fabrics fail for a
CFS capable feature.
"
::= { ciscoCFSMIBNotifs 2 }
ciscoCFSDiscoveryCompleteNotif NOTIFICATION-TYPE
OBJECTS { cfsPeersDiscoveryResult,
cfsPeersDiscoveryFailureReason }
STATUS current
DESCRIPTION
"Notification to indicate that the CFS has completed
discovering the CFS capable devices in the fabric.
If the value of cfsPeersDiscoveryResult is 'successful',
then the cfsPeersTable is appropriately populated.
"
::= { ciscoCFSMIBNotifs 3 }
--
-- Conformance
--
ciscoCFSMIBCompliances OBJECT IDENTIFIER
::= { ciscoCFSMIBConformance 1 }
ciscoCFSMIBGroups OBJECT IDENTIFIER
::= { ciscoCFSMIBConformance 2 }
ciscoCFSMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- superseded by
-- ciscoCFSMIBComplianceRev1
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-CFS-MIB.
"
MODULE
MANDATORY-GROUPS {
cfsFeatureOpGroup,
cfsPendingConfOwnerGroup,
cfsFeatureActionNotifGroup
}
GROUP cfsFeatureNotifObjectsGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports notifications as defined in the
'cfsMergeFailNotifGroup'.
"
GROUP cfsMergeFailNotifGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports fabric merge.
"
::= { ciscoCFSMIBCompliances 1 }
ciscoCFSMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated --Superseded by ciscoCFSMIBComplianceRev2
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-CFS-MIB.
"
MODULE
MANDATORY-GROUPS {
cfsFeatureOpGroupRev1,
cfsPendingConfOwnerGroup,
cfsFeatureActionNotifGroup,
cfsMembersGroup,
cfsPeerDiscoveryNotifGroup,
cfsFeatureOpExtGroup
}
GROUP cfsFeatureNotifObjectsGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports notifications as defined in the
'cfsMergeFailNotifGroup'.
"
GROUP cfsMergeFailNotifGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports fabric merge.
"
GROUP cfsDistCtrlGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports CFS distribution control.
"
::= { ciscoCFSMIBCompliances 2 }
ciscoCFSMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated --Superseded by ciscoCFSMIBComplianceRev3
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-CFS-MIB.
"
MODULE
MANDATORY-GROUPS {
cfsFeatureOpGroupRev2,
cfsPendingConfOwnerGroup,
cfsFeatureActionNotifGroup,
cfsMembersGroup,
cfsPeerDiscoveryNotifGroup,
cfsFeatureOpExtGroup
}
GROUP cfsFeatureNotifObjectsGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports notifications as defined in the
'cfsMergeFailNotifGroup'.
"
GROUP cfsMergeFailNotifGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports fabric merge.
"
GROUP cfsDistCtrlGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports CFS distribution control.
"
GROUP cfsDistCtrlInetGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports per Internet address type CFS distribution
control.
"
::= { ciscoCFSMIBCompliances 3 }
ciscoCFSMIBComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-CFS-MIB.
"
MODULE
MANDATORY-GROUPS {
cfsFeatureOpGroupRev2,
cfsPendingConfOwnerGroup,
cfsFeatureActionNotifGroup,
cfsMembersGroup,
cfsPeerDiscoveryNotifGroup,
cfsFeatureOpExtGroupRev1
}
GROUP cfsFeatureNotifObjectsGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports notifications as defined in the
'cfsMergeFailNotifGroup'.
"
GROUP cfsMergeFailNotifGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports fabric merge.
"
GROUP cfsDistCtrlGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports CFS distribution control.
"
GROUP cfsDistCtrlInetGroup
DESCRIPTION
"This group is conditionally mandatory and must be
implemented by the agent of the managed entity only
if the CFS implementation on the managed entity
supports per Internet address type CFS distribution
control.
"
::= { ciscoCFSMIBCompliances 4 }
--
-- Units of Conformance
--
cfsFeatureOpGroup OBJECT-GROUP
OBJECTS {
cfsFeatureOpAction,
cfsFeatureOpScopeType,
cfsFeatureOpScopeVal,
cfsFeatureOpLastAction,
cfsFeatureOpLastScopeType,
cfsFeatureOpLastScopeVal,
cfsFeatureOpLastActionResult,
cfsFeatureOpLastFailureReason,
cfsFeatureOpShowCfgOption,
cfsFeatureOpStatus,
cfsMergeStatusValue
}
STATUS deprecated -- superseded by cfsFeatureOpGroupRev1
DESCRIPTION
"A collection of objects for configurations of the CFS capable
features.
"
::= { ciscoCFSMIBGroups 1 }
cfsPendingConfOwnerGroup OBJECT-GROUP
OBJECTS {
cfsPendingConfOwnerAddrType,
cfsPendingConfOwnerAddr,
cfsPendingConfOwnerIDType,
cfsPendingConfOwnerID
}
STATUS current
DESCRIPTION
"A collection of objects for the 'Pending Configuration'
owner details of the CFS capable features.
"
::= { ciscoCFSMIBGroups 2 }
cfsFeatureNotifObjectsGroup OBJECT-GROUP
OBJECTS {
cfsMergeFailFeatureName,
cfsMergeFailScopeType,
cfsMergeFailScopeVal,
cfsMergeFailReasonDescription
}
STATUS current
DESCRIPTION
"A collection of objects required for CFS notifications."
::= { ciscoCFSMIBGroups 3 }
cfsFeatureActionNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {ciscoCFSFeatureActionNotif}
STATUS current
DESCRIPTION
"A collection of notifications for the CFS actions on the
CFS capable features.
"
::= { ciscoCFSMIBGroups 4 }
cfsMergeFailNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoCFSMergeFailNotif }
STATUS current
DESCRIPTION
"A collection of notifications for CFS fabric merge
failures.
"
::= { ciscoCFSMIBGroups 5 }
cfsMembersGroup OBJECT-GROUP
OBJECTS {
cfsMergeMemberFabricType,
cfsMergeMemberRole,
cfsStartPeersDiscovery,
cfsPeersDiscoveryResult,
cfsPeersDiscoveryFailureReason,
cfsPeerAddr,
cfsFeaturePeersAddr
}
STATUS current
DESCRIPTION
"A collection of objects for discovering list of devices in
the fabric.
"
::= { ciscoCFSMIBGroups 6 }
cfsFeatureOpExtGroup OBJECT-GROUP
OBJECTS {
cfsFeatureOpExtLastAction,
cfsFeatureOpExtLastActionResult,
cfsFeatureOpExtLastFailureReason,
cfsFeatureOpExtShowCfgOption
}
STATUS deprecated -- superseded by cfsFeatureOpExtGroupRev1
DESCRIPTION
"A collection of objects for CFS action results.
"
::= { ciscoCFSMIBGroups 7 }
cfsPeerDiscoveryNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoCFSDiscoveryCompleteNotif }
STATUS current
DESCRIPTION
"A collection of notifications for CFS peer discovery.
"
::= { ciscoCFSMIBGroups 8 }
cfsFeatureOpGroupRev1 OBJECT-GROUP
OBJECTS {
cfsFeatureOpAction,
cfsFeatureOpScopeType,
cfsFeatureOpScopeVal,
cfsFeatureOpLastAction,
cfsFeatureOpLastScopeType,
cfsFeatureOpLastScopeVal,
cfsFeatureOpLastActionResult,
cfsFeatureOpLastFailureReason,
cfsFeatureOpStatus,
cfsMergeStatusValue
}
STATUS deprecated -- superseded by cfsFeatureOpGroupRev2
DESCRIPTION
"A collection of objects for configurations of the CFS capable
features.
"
::= { ciscoCFSMIBGroups 9 }
cfsDistCtrlGroup OBJECT-GROUP
OBJECTS { cfsDistCtrl }
STATUS current
DESCRIPTION
"A collection of objects for controlling the distribution
capabilities of CFS.
"
::= { ciscoCFSMIBGroups 10 }
cfsDistCtrlInetGroup OBJECT-GROUP
OBJECTS {
cfsDistCtrlAddr,
cfsDistCtrlAction
}
STATUS current
DESCRIPTION
"A collection of objects for controlling the per Internet
address type distribution capabilities of CFS.
"
::= { ciscoCFSMIBGroups 11 }
cfsFeatureOpGroupRev2 OBJECT-GROUP
OBJECTS {
cfsFeatureOpAction,
cfsFeatureOpScopeType,
cfsFeatureOpScopeVal,
cfsFeatureOpLastAction,
cfsFeatureOpLastScopeType,
cfsFeatureOpLastScopeVal,
cfsFeatureOpLastActionResult,
cfsFeatureOpLastFailureReason,
cfsFeatureOpStatus,
cfsMergeStatusValue,
cfsFeatureOpAttribs
}
STATUS current
DESCRIPTION
"A collection of objects for configurations of the CFS capable
features.
"
::= { ciscoCFSMIBGroups 12 }
cfsFeatureOpExtGroupRev1 OBJECT-GROUP
OBJECTS {
cfsFeatureOpExtLastAction,
cfsFeatureOpExtLastActionTime,
cfsFeatureOpExtLastActionResult,
cfsFeatureOpExtLastFailureReason,
cfsFeatureOpExtShowCfgOption
}
STATUS current
DESCRIPTION
"A collection of objects for CFS action results.
"
::= { ciscoCFSMIBGroups 13 }
END
Reference in New Issue View Git Blame Copy Permalink