mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-18 00:13:02 +00:00
583 lines
20 KiB
Plaintext
583 lines
20 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-C8500-REDUNDANCY-MIB.my: Cat8540MSR Redundancy Management MIB
|
|
--
|
|
-- June 1998, Vasmi Abidi
|
|
--
|
|
-- Copyright (c) 1998, 1999, 2003 by Cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- *****************************************************************
|
|
|
|
|
|
CISCO-C8500-REDUNDANCY-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION, TimeStamp, TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
|
|
FROM SNMPv2-CONF
|
|
ciscoMgmt
|
|
FROM CISCO-SMI;
|
|
|
|
ciscoC8500RedundancyMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200305040000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W. Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-atm@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB allows management of redundancy of CPU and
|
|
switch cards for the Catalyst 8540 switch, and other
|
|
products with similar implementations.
|
|
|
|
The Catalyst 8540 is an ATM switch. It has 13 (or, in
|
|
some models, 14) slots, of which 2 slots can hold CPU
|
|
cards, and 3 (or, in some models, 4) slots can hold
|
|
switch cards. A switch card is one that contains the
|
|
ATM switching fabric. Two switch cards are combined
|
|
to operate in 20Gbps switching mode.
|
|
For CPU cards, 1+1 redundancy is supported.
|
|
For switch cards, 2+1 redundancy is supported."
|
|
|
|
REVISION "200305040000Z"
|
|
DESCRIPTION
|
|
"Added the following scalar objects to ccrCpu group:
|
|
ccrCpuStandbyEnableMode, ccrCpuSwitchoverTime,
|
|
ccrForceCounterSync, ccrIfCounterSyncFreq,
|
|
ccrVcCounterSyncFreq, ccrSigCounterSyncEnable."
|
|
|
|
REVISION "199806220000Z"
|
|
DESCRIPTION
|
|
"Initial version of the MIB Module."
|
|
|
|
::= { ciscoMgmt 105 }
|
|
|
|
-- Terminology
|
|
|
|
-- A "redundancy group" is a set of cards (or, in general, physical or
|
|
-- logical entities), that may operate in a redundant manner. This
|
|
-- means that at any time one or more member entities (e.g., cards) of
|
|
-- the group are 'active', while others are 'standby', such that if an
|
|
-- active member fails, one of the standby members becomes active in
|
|
-- its stead. It is also possible for a member to be 'unused', in
|
|
-- which case it is out of service. See the definition of
|
|
-- RedundancyMode below.
|
|
|
|
-- A "switchover" is an event in which an active card
|
|
-- either becomes a standby (because the card failed, or
|
|
-- because of user configuration) or is removed, and another
|
|
-- card that was previously standby becomes active.
|
|
|
|
|
|
-- Textual Conventions
|
|
|
|
|
|
RedundancyStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of a card."
|
|
SYNTAX INTEGER {
|
|
notPresent(1), -- no card in slot
|
|
ok(2),
|
|
fault(3)
|
|
}
|
|
|
|
|
|
RedundancyMode ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The redundancy mode of a card.
|
|
|
|
The redundancy mode of a card is part of the state of
|
|
the redundancy machine (i.e., the hardware or software
|
|
that implements redundancy). The redundancy modes of
|
|
all the cards in a redundancy group together represent
|
|
the state of the redundancy machine for that
|
|
redundancy group. The inputs to the redundancy machine
|
|
that cause the redundancy mode of a card to transition
|
|
from one value to another are events like card
|
|
failure, card removal, user configuration, etc.
|
|
Objects defined using this TC have a MAX-ACCESS of
|
|
read-write or read-create. This allows a user to force
|
|
the redundancy machine to transition to a desired
|
|
state.
|
|
|
|
The following values may be written:
|
|
|
|
active(1) - Make this card an active member of the
|
|
redundancy group.
|
|
|
|
standby(2) - Make this card a standby member of
|
|
the redundancy group.
|
|
|
|
unused(3) - Do not use this card.
|
|
|
|
Writing the above values may cause a switchover.
|
|
|
|
When read, the values mean:
|
|
|
|
active(1) - This card is an active member of the
|
|
redundancy group.
|
|
|
|
standby(2) - This card is a standby member of the
|
|
redundancy group.
|
|
|
|
unused(3) - This card is not being used at present.
|
|
|
|
notPresent(4) - There is no card in the slot.
|
|
"
|
|
SYNTAX INTEGER {
|
|
active(1), -- also called 'primary'
|
|
standby(2), -- also called 'secondary'
|
|
unused(3), -- 'not used' or 'non participant'
|
|
notPresent(4) -- no card in slot
|
|
}
|
|
|
|
|
|
RedundancySlotIndex ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A value that identifies a physical slot in the
|
|
chassis.
|
|
|
|
For a chassis with slots that are numbered left to
|
|
right, the leftmost slot has value 1.
|
|
|
|
For a chassis with slots that are numbered top to
|
|
bottom, the topmost slot has value 1."
|
|
SYNTAX Unsigned32 (1..65535)
|
|
|
|
|
|
ciscoC8500RedundancyMIBObjects OBJECT IDENTIFIER ::=
|
|
{ ciscoC8500RedundancyMIB 1 }
|
|
|
|
-- groups
|
|
|
|
ccrCpu OBJECT IDENTIFIER
|
|
::= { ciscoC8500RedundancyMIBObjects 1 }
|
|
ccrSwitch OBJECT IDENTIFIER
|
|
::= { ciscoC8500RedundancyMIBObjects 2 }
|
|
|
|
-- CPU group
|
|
|
|
ccrCpuTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CcrCpuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in this table for each slot that
|
|
can hold a CPU card."
|
|
::= { ccrCpu 1 }
|
|
|
|
ccrCpuEntry OBJECT-TYPE
|
|
SYNTAX CcrCpuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundancy information for a CPU card."
|
|
INDEX { ccrCpuSlotIndex }
|
|
::= { ccrCpuTable 1 }
|
|
|
|
CcrCpuEntry ::=
|
|
SEQUENCE {
|
|
ccrCpuSlotIndex RedundancySlotIndex,
|
|
ccrCpuMode RedundancyMode,
|
|
ccrCpuStatus RedundancyStatus
|
|
}
|
|
|
|
ccrCpuSlotIndex OBJECT-TYPE
|
|
SYNTAX RedundancySlotIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a chassis slot."
|
|
::= { ccrCpuEntry 1 }
|
|
|
|
ccrCpuMode OBJECT-TYPE
|
|
SYNTAX RedundancyMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The redundancy mode of this CPU card."
|
|
::= { ccrCpuEntry 2 }
|
|
|
|
ccrCpuStatus OBJECT-TYPE
|
|
SYNTAX RedundancyStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of this CPU card."
|
|
::= { ccrCpuEntry 3 }
|
|
|
|
ccrSyncConfigOnSet OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
runningConfig(0),
|
|
startupConfig(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The device's running-configuration and
|
|
startup-configuration both reside on the active CPU
|
|
card. This object indicates whether these
|
|
configurations should be copied from the active CPU
|
|
to the standby CPU whenever they change. It is
|
|
acceptable to copy either, both, or neither."
|
|
::= { ccrCpu 2 }
|
|
|
|
ccrCpuStandbyEnableMode OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to allow or disallow the
|
|
execution of the enable exec command on the
|
|
secondary CPU.
|
|
|
|
When set to 'true', the enable exec command can be
|
|
executed on secondary CPU, and the user may enter
|
|
enable mode after keying in the password configured.
|
|
When set to 'false', the enable exec command cannot
|
|
be executed; thus, no user may enter enabled mode."
|
|
DEFVAL { false }
|
|
::= { ccrCpu 3 }
|
|
|
|
ccrCpuSwitchoverTime OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The time taken for the most recent CPU switchover."
|
|
::= { ccrCpu 4 }
|
|
|
|
ccrForceCounterSync OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
forcesync (1),
|
|
noop (2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object is used to force the synchronization of
|
|
counters from primary CPU to secondary CPU. It should
|
|
generally be set just before a controlled Route
|
|
Processor Switchover.
|
|
|
|
When this object is retrieved, the value 'noop' is
|
|
returned. When this object is set to 'noop' no
|
|
operation is performed."
|
|
::= { ccrCpu 5 }
|
|
|
|
ccrIfCounterSyncFreq OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the periodicity of interface
|
|
counter synchronization from primary CPU to
|
|
secondary CPU. Setting this object to 0 will disable
|
|
counter synchronization."
|
|
::= { ccrCpu 6 }
|
|
|
|
ccrVcCounterSyncFreq OBJECT-TYPE
|
|
SYNTAX INTEGER (0..1440)
|
|
UNITS "minutes"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the periodicity of Virtual
|
|
Circuit (VC) counter synchronization from primary CPU
|
|
to secondary CPU. Setting this object to 0 will
|
|
disable counter synchronization."
|
|
::= { ccrCpu 7 }
|
|
|
|
ccrSigCounterSyncEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object configures the synchronization of ATM
|
|
Signalling Statistics from primary CPU to
|
|
secondary CPU.
|
|
|
|
When this object is set to 'true', sychronization
|
|
is enabled. When this object is set to 'false',
|
|
synchronization is disabled."
|
|
::= { ccrCpu 8 }
|
|
|
|
-- Switch Group
|
|
|
|
ccrSwitchTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CcrSwitchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"There is an entry in this table for each slot that
|
|
can hold a switch card. A 'switch card' is a card that
|
|
contains the ATM switch fabric."
|
|
::= { ccrSwitch 1 }
|
|
|
|
ccrSwitchEntry OBJECT-TYPE
|
|
SYNTAX CcrSwitchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Redundancy information for a switch card."
|
|
INDEX { ccrSwitchSlotIndex }
|
|
::= { ccrSwitchTable 1 }
|
|
|
|
CcrSwitchEntry ::=
|
|
SEQUENCE {
|
|
ccrSwitchSlotIndex RedundancySlotIndex,
|
|
ccrSwitchMode RedundancyMode,
|
|
ccrSwitchStatus RedundancyStatus
|
|
}
|
|
|
|
ccrSwitchSlotIndex OBJECT-TYPE
|
|
SYNTAX RedundancySlotIndex
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Identifies a chassis slot."
|
|
::= { ccrSwitchEntry 1 }
|
|
|
|
ccrSwitchMode OBJECT-TYPE
|
|
SYNTAX RedundancyMode
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The redundancy mode of this switch card."
|
|
::= { ccrSwitchEntry 2 }
|
|
|
|
ccrSwitchStatus OBJECT-TYPE
|
|
SYNTAX RedundancyStatus
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The operational status of this switch card."
|
|
::= { ccrSwitchEntry 3 }
|
|
|
|
|
|
ccrSwitchLastSwitchoverTime OBJECT-TYPE
|
|
SYNTAX TimeStamp
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of sysUpTime at the last switchover of the
|
|
switch cards.
|
|
|
|
The value is zero if there was no switchover since
|
|
agent initialization."
|
|
::= { ccrSwitch 2 }
|
|
|
|
ccrSwitchLastSwitchoverReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
none(1),
|
|
notKnown(2),
|
|
userInitiated(3),
|
|
cardFailed(4),
|
|
cardRecovered(5),
|
|
cardRemoved(6), -- online removal
|
|
cardInserted(7) -- online insertion
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason for the last switch card switchover.
|
|
|
|
The value is none(1) if there was no switchover since
|
|
agent initialization."
|
|
::= { ccrSwitch 3 }
|
|
|
|
ccrSwitchBw OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenGbps(1),
|
|
twentyGbps(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The switching capacity (i.e., bandwidth) of the
|
|
switch fabric.
|
|
tenGbps(1) - 10 Gigabits/sec
|
|
twentyGbps(2) - 20 Gigabits/sec.
|
|
"
|
|
::= { ccrSwitch 4 }
|
|
|
|
|
|
ccrDesiredSwitchBw OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
tenGbps(1),
|
|
twentyGbps(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The desired switching capacity (i.e., bandwidth) of
|
|
the switch fabric.
|
|
tenGbps(1) - 10 Gigabits/sec
|
|
twentyGbps(2) - 20 Gigabits/sec
|
|
|
|
If the value configured by writing to this object is
|
|
supported by the device, it will be applied at the
|
|
next reboot. The speed at which the switch fabric is
|
|
currently operating is reflected by the value of
|
|
ccrSwitchBw."
|
|
::= { ccrSwitch 5 }
|
|
|
|
|
|
-- Trap control objects
|
|
-- None
|
|
|
|
|
|
-- Notifications
|
|
|
|
ciscoC8500RedundancyMIBNotificationPrefix OBJECT IDENTIFIER ::=
|
|
{ ciscoC8500RedundancyMIB 2 }
|
|
ccrMIBNotifications OBJECT IDENTIFIER ::=
|
|
{ ciscoC8500RedundancyMIBNotificationPrefix 0 }
|
|
|
|
ccrCpuStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { ccrCpuStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the value of
|
|
ccrCpuStatus changes for a CPU card.
|
|
|
|
The varbind indicates the current status of the
|
|
affected card."
|
|
::= { ccrMIBNotifications 1 }
|
|
|
|
ccrSwitchStatusChange NOTIFICATION-TYPE
|
|
OBJECTS { ccrSwitchStatus }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the value of
|
|
ccrSwitchStatus changes for a switch card.
|
|
|
|
The varbind indicates the current status of the
|
|
affected card."
|
|
::= { ccrMIBNotifications 2 }
|
|
|
|
ccrSwitchModeChange NOTIFICATION-TYPE
|
|
OBJECTS { ccrSwitchMode }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This notification is generated when the value of
|
|
ccrSwitchMode changes from active(1) to either
|
|
standby(2) or unused(3) or notPresent(4).
|
|
The varbind indicates the current mode of the
|
|
affected card."
|
|
::= { ccrMIBNotifications 3 }
|
|
|
|
|
|
-- Compliance Statements
|
|
|
|
ciscoC8500RedundancyMIBConformance OBJECT IDENTIFIER ::=
|
|
{ ciscoC8500RedundancyMIB 3 }
|
|
ciscoC8500RedundancyMIBCompliances OBJECT IDENTIFIER ::=
|
|
{ ciscoC8500RedundancyMIBConformance 1 }
|
|
ciscoC8500RedundancyMIBGroups OBJECT IDENTIFIER ::=
|
|
{ ciscoC8500RedundancyMIBConformance 2 }
|
|
|
|
ciscoC8500RedundancyMIBCompliance MODULE-COMPLIANCE
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"The compliance statement for Cisco agents which
|
|
implement the CISCO-C8500-REDUNDANCY-MIB."
|
|
MODULE
|
|
MANDATORY-GROUPS { ccrCpuMibGroup,
|
|
ccrSwitchMibGroup
|
|
-- ,ccrNotificationsGroup
|
|
}
|
|
::= {ciscoC8500RedundancyMIBCompliances 1 }
|
|
|
|
ciscoC8500RedundancyMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement to include objects
|
|
related to the redundancy features like
|
|
enable password on secondary, switchover
|
|
duration and counter."
|
|
MODULE
|
|
MANDATORY-GROUPS { ccrCpuMibGroup1,
|
|
ccrSwitchMibGroup,
|
|
ccrNotificationsGroup
|
|
}
|
|
::= {ciscoC8500RedundancyMIBCompliances 2 }
|
|
|
|
-- units of conformance
|
|
|
|
ccrCpuMibGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ccrCpuMode,
|
|
ccrCpuStatus,
|
|
ccrSyncConfigOnSet
|
|
}
|
|
STATUS obsolete
|
|
DESCRIPTION
|
|
"A collection of objects providing the ability to
|
|
manage CPU card redundancy."
|
|
::= { ciscoC8500RedundancyMIBGroups 1 }
|
|
|
|
|
|
ccrSwitchMibGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
ccrSwitchMode,
|
|
ccrSwitchStatus,
|
|
ccrSwitchLastSwitchoverTime,
|
|
ccrSwitchLastSwitchoverReason,
|
|
ccrSwitchBw,
|
|
ccrDesiredSwitchBw
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the ability to
|
|
manage Switch Fabric card redundancy."
|
|
::= { ciscoC8500RedundancyMIBGroups 2 }
|
|
|
|
ccrNotificationsGroup NOTIFICATION-GROUP
|
|
NOTIFICATIONS {
|
|
ccrCpuStatusChange,
|
|
ccrSwitchStatusChange,
|
|
ccrSwitchModeChange
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of notifications related to redundancy."
|
|
::= { ciscoC8500RedundancyMIBGroups 3 }
|
|
|
|
ccrCpuMibGroup1 OBJECT-GROUP
|
|
OBJECTS {
|
|
ccrCpuMode,
|
|
ccrCpuStatus,
|
|
ccrSyncConfigOnSet,
|
|
ccrCpuStandbyEnableMode,
|
|
ccrCpuSwitchoverTime,
|
|
ccrForceCounterSync,
|
|
ccrIfCounterSyncFreq,
|
|
ccrVcCounterSyncFreq,
|
|
ccrSigCounterSyncEnable
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the ability to
|
|
manage CPU card redundancy and redundancy feature
|
|
for counter, enable password on secondary and
|
|
switchover duration."
|
|
::= { ciscoC8500RedundancyMIBGroups 4 }
|
|
|
|
END
|