MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/APPACCELERATION-STATUS-MIB.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2405 lines
68 KiB
Plaintext
Raw Blame History

-- ************************************************************************
-- APPACCELERATION-STATUS-MIB.txt: Citrix Systems Application Acceleration
-- System Status MIB
--
--
-- Copyright (c) 2004-2013 by Citrix Systems, Inc.
-- All rights reserved.
--
-- ************************************************************************
--
APPACCELERATION-STATUS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
MODULE-IDENTITY
FROM SNMPv2-SMI
InetAddress, InetAddressType, InetAddressPrefixLength
FROM INET-ADDRESS-MIB
AppAccelerationAlarmSeverity,
AppAccelerationSeqNum,
AppAccelerationYesNo,
AppAccelerationDescription
FROM APPACCELERATION-TC
appAccelerationMgmt,
appAccelerationNotifications
FROM APPACCELERATION-SMI;
appAccelerationStatusMIB MODULE-IDENTITY
LAST-UPDATED "201310110000Z"
ORGANIZATION "www.citrix.com"
CONTACT-INFO
" Citrix Systems, Inc.
Postal: 851 West Cypress Creek Road
Fort Lauderdale, Florida 33309
United States"
DESCRIPTION
"This module defines the status variables that can be
retrieved from a Citrix Application Acceleration unit.
"
::= { appAccelerationMgmt 1 }
--
-- Base assignments
--
wsStatusMIBObjects OBJECT IDENTIFIER ::= { appAccelerationStatusMIB 1 }
wsStatusMIBNotifications OBJECT IDENTIFIER ::= { appAccelerationNotifications 1 }
wsStatusMIBConformance OBJECT IDENTIFIER ::= { appAccelerationStatusMIB 2 }
--
-- Status Scalars
--
wsStatusMIBScalars OBJECT IDENTIFIER ::= { wsStatusMIBObjects 1 }
wsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
busy(100),
down(101),
licenseExpired(102),
bypassTraffic(103)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational state of the unit."
::= { wsStatusMIBScalars 1 }
wsLoad1Min OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The 1 minute load average that is also available in the
Unix TOP or UPTIME commands. It reports the average number
of processes ready to be run. The value is computed by
taking the load average value and multiplying it by 100,
then converting the value to an integer."
::= { wsStatusMIBScalars 2 }
wsLoad5Min OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The 5 minute load average that is also available in the
Unix TOP or UPTIME commands. It reports the average number
of processes ready to be run. The value is computed by
taking the load average value and multiplying it by 100,
then converting the value to an integer."
::= { wsStatusMIBScalars 3 }
wsLoad15Min OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The 15 minute load average that is also available in the
Unix TOP or UPTIME commands. It reports the average number
of processes ready to be run. The value is computed by
taking the load average value and multiplying it by 100,
then converting the value to an integer."
::= { wsStatusMIBScalars 4 }
wsBypass OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
bypass(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Traffic processing status.
This is also available in the GUI Features page.
"
::= { wsStatusMIBScalars 5 }
wsLastAlarmSeqNum OBJECT-TYPE
SYNTAX AppAccelerationSeqNum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the alarm sequence number for the last alarm generated
as a trap."
::= { wsStatusMIBScalars 6 }
wsBoostStatus OBJECT-TYPE
SYNTAX INTEGER {
hardboost(1),
softboost(2)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The selected boost mode. This is also available in the
GUI Bandwidth Management page.
"
::= { wsStatusMIBScalars 7 }
wsBandwidthMode OBJECT-TYPE
SYNTAX INTEGER {
full(1),
partial(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The selected bandwidth usage. This is also available in the
GUI Bandwidth Management page.
"
::= { wsStatusMIBScalars 8 }
wsBandwidthLimit OBJECT-TYPE
SYNTAX INTEGER
UNITS "K-Bits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Send bandwidth limit. This is also available
in the GUI Bandwidth Management page.
"
::= { wsStatusMIBScalars 9 }
wsWanOutOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets transmitted on the WAN side.
This is also available in the GUI Usage Graph page.
"
::= { wsStatusMIBScalars 10 }
wsWanInOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets received on the WAN side.
This is also available in the GUI Usage Graph page.
"
::= { wsStatusMIBScalars 11}
wsLanOutOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets transmitted on the LAN side.
This is also available in the GUI Usage Graph page.
"
::= { wsStatusMIBScalars 12}
wsLanInOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets received on the LAN side.
This is also available in the GUI Usage Graph page.
"
::= { wsStatusMIBScalars 13}
wsCompressionEffectiveBandwidth OBJECT-TYPE
SYNTAX INTEGER
UNITS "K-Bits/sec"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The equivalent throughput before compression.
This is also available in the GUI Compression
Status page. This variable may be reset from
the above web page.
"
::= { wsStatusMIBScalars 14}
wsSendCompressionRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average send compression rate per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.
This is also available in the GUI Compression
Status page. This variable may be reset from
the above web page.
"
::= { wsStatusMIBScalars 15}
wsReceiveCompressionRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Average receive compression rate per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.
This is also available in the GUI Compression
Status page. This variable may be reset from
the above web page.
"
::= { wsStatusMIBScalars 16}
wsCompressionStatsCollectionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of centiseconds (0.01 seconds) since the start
of the compression statistics collection. This is also
available in the GUI Compression Status page.
This variable may be reset from the above web page.
"
::= { wsStatusMIBScalars 17}
wsAcceleratedConnections OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of current accelerated (active + inactive) connections.
This is also available in the GUI System Status page.
"
::= { wsStatusMIBScalars 18}
wsNonAcceleratedConnections OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of current non-accelerated connections.
This is also available in the GUI System Status page.
"
::= { wsStatusMIBScalars 19}
wsHaState OBJECT-TYPE
SYNTAX INTEGER {
standalone (0),
primary (1),
secondary (2),
restarting (3),
starting (4),
invalid (5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"High availability state of the unit.
This is also available in the GUI High Availability page.
"
::= { wsStatusMIBScalars 20}
wsHaVmIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Management IP Address used in HA setup.
This is also available in the GUI High Availability page.
"
::= { wsStatusMIBScalars 21}
wsHaSecondaryIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When retrieved from the primary unit (in HA configuration),
this is the IP Address of the secondary unit.
When retrieved from a secondary or standalone unit,
this is 0.0.0.0.
This is also available in the GUI High Availability page.
"
::= { wsStatusMIBScalars 22}
wsPrimaryIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IP Address of the Primary Port,
which is for management data.
"
::= { wsStatusMIBScalars 23}
wsCpuUsage OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Averaged percent CPU used by the traffic accelerator
in the last minute.
"
::= { wsStatusMIBScalars 24}
wsConnectedPlugIns OBJECT-TYPE
SYNTAX Counter
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of Plug-ins connected to this unit.
This is also available in the GUI System Status page.
"
::= { wsStatusMIBScalars 25 }
wsMaxPlugIns OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum number of Plug-ins that are allowed to connect
to this unit. This is also available in the GUI
System Status page.
"
::= { wsStatusMIBScalars 26 }
wsQosStatsCollectionTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of centiseconds (0.01 seconds) since the start
of the QoS and ICA statistics collection. This is also
available in the GUI QoS Statistics page.
This variable may be reset from the above web page.
"
::= { wsStatusMIBScalars 27}
wsUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time (in hundredths of a second) since the unit
was last re-initialized.
"
::= { wsStatusMIBScalars 28}
wsSerialNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Appliance serial number.
"
::= { wsStatusMIBScalars 29}
wsNonAcceleratedVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "1000-Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total non-accelerated k-bytes received by the unit, on all interfaces.
"
::= { wsStatusMIBScalars 30}
wsActiveConnections OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of active accelerated connections.
This is also available in the GUI System Status page.
"
::= { wsStatusMIBScalars 31}
wsAccelerationStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Traffic acceleration (flow control and compression) status.
This is also available in the GUI Features page.
"
::= { wsStatusMIBScalars 32}
wsTrafficShapingStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Traffic shaping (QoS) status.
This is also available in the GUI Features page.
"
::= { wsStatusMIBScalars 33}
wsSystemLoad OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Load indicator, 100 meant overload.
"
::= { wsStatusMIBScalars 34}
wsWanSendRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average WAN side send rate in the last minute.
"
::= { wsStatusMIBScalars 35 }
wsWanReceiveRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average WAN side receive rate in the last minute.
"
::= { wsStatusMIBScalars 36}
wsLanSendRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average LAN side send rate in the last minute.
"
::= { wsStatusMIBScalars 37 }
wsLanReceiveRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average LAN side receive rate in the last minute.
"
::= { wsStatusMIBScalars 38}
wsNonAcceleratedRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average non-accelerated traffic rate in the last minute.
"
::= { wsStatusMIBScalars 39}
wsModelNumber OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Appliance model number.
"
::= { wsStatusMIBScalars 40}
wsWccpStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WCCP status.
This is also available in the GUI Features page.
"
::= { wsStatusMIBScalars 41}
--
-- Status Tables
--
wsStatusMIBTables OBJECT IDENTIFIER ::= { wsStatusMIBObjects 2 }
--
-- Active alarm table
--
wsActiveAlarmTable OBJECT-TYPE
SYNTAX SEQUENCE OF ActiveAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the active alarm entries. This represents the fault
conditions that are still active in the unit.
"
::= { wsStatusMIBTables 1 }
activeAlarmEntry OBJECT-TYPE
SYNTAX ActiveAlarmEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The active alarm entries that are still valid system faults.
RFC2578 (SMIv2) requires this to be not-accessible.
"
INDEX { wsActiveAlarmIndex }
::= { wsActiveAlarmTable 1 }
ActiveAlarmEntry ::= SEQUENCE {
wsActiveAlarmIndex Integer32,
wsActiveAlarmSeqNum AppAccelerationSeqNum,
wsActiveAlarmID OBJECT IDENTIFIER,
wsActiveAlarmSeverity AppAccelerationAlarmSeverity,
wsActiveAlarmLogTime TimeTicks,
wsActiveAlarmDesc AppAccelerationDescription,
wsActiveAlarmAcked AppAccelerationYesNo,
wsActiveAlarmServiceAffect AppAccelerationYesNo
}
wsActiveAlarmIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
active alarm table."
::= { activeAlarmEntry 1 }
wsActiveAlarmSeqNum OBJECT-TYPE
SYNTAX AppAccelerationSeqNum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active alarm's sequence number at the time it was
generated."
::= { activeAlarmEntry 2 }
wsActiveAlarmID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The OID identifying the actual trap that was generated."
::= { activeAlarmEntry 3 }
wsActiveAlarmSeverity OBJECT-TYPE
SYNTAX AppAccelerationAlarmSeverity
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The alarm severity for the active alarm."
::= { activeAlarmEntry 4 }
wsActiveAlarmLogTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when the alarm was generated."
::= { activeAlarmEntry 5 }
wsActiveAlarmDesc OBJECT-TYPE
SYNTAX AppAccelerationDescription
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A description for the active alarm."
::= { activeAlarmEntry 6 }
wsActiveAlarmAcked OBJECT-TYPE
SYNTAX AppAccelerationYesNo
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies if the user has acknowledged the alarm."
::= { activeAlarmEntry 7 }
wsActiveAlarmServiceAffect OBJECT-TYPE
SYNTAX AppAccelerationYesNo
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies if the alarm is service affecting."
::= { activeAlarmEntry 8 }
--
-- Service class statistics table
--
wsServiceClassStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsServiceClassStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of service class statistics entries. This contains the
performance statistics separated by service classes.
"
::= { wsStatusMIBTables 2 }
wsServiceClassStatsEntry OBJECT-TYPE
SYNTAX WsServiceClassStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each service class entry contains the performance statistics for
one service class.
"
INDEX { wsServiceClassIndex }
::= { wsServiceClassStatsTable 1 }
WsServiceClassStatsEntry ::= SEQUENCE {
wsServiceClassIndex INTEGER,
wsServiceClassName DisplayString,
wsScsCurrentAcceleratedConnections INTEGER,
wsScsTotalAcceleratedConnections Counter64,
wsScsTotalAcceleratedOctets Counter64,
wsScsTotalNonAcceleratedConnections Counter64,
wsScsTotalNonAcceleratedOctets Counter64,
wsScsTotalPreCompressionOctets Counter64,
wsScsCompressSentOctets Counter64,
wsScsCompressReceivedOctets Counter64,
wsScsPreCompressSentOctets Counter64,
wsScsPreCompressReceivedOctets Counter64,
wsScsSendBWSavings INTEGER,
wsScsRecvBWSavings INTEGER,
wsScsSendRecvBWSavings INTEGER,
wsScsSendCompressionRatio INTEGER,
wsScsRecvCompressionRatio INTEGER,
wsScsSendRecvCompressionRatio INTEGER
}
wsServiceClassIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used as an index that uniquely identifies a service class
in the service class statistics table.
"
::= { wsServiceClassStatsEntry 1 }
wsServiceClassName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc.
The list of service classes monitored is defined in the
GUI Configure Settings: Service Class page.
"
::= { wsServiceClassStatsEntry 2 }
wsScsCurrentAcceleratedConnections OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current number of accelerated connections for the
service class. This is also available in the
GUI Service Class Statistics Detail page. This
counter is reset only on system restart.
"
::= { wsServiceClassStatsEntry 3 }
wsScsTotalAcceleratedConnections OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of accelerated connections for the
service class. This is also available in the
GUI Service Class Statistics Detail page. This
counter is reset only on system restart.
"
::= { wsServiceClassStatsEntry 4 }
wsScsTotalAcceleratedOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of accelerated octets for the service class.
This is also available in the GUI Service Class Statistics
Detail page. This counter is reset only on system restart.
"
::= { wsServiceClassStatsEntry 5 }
wsScsTotalNonAcceleratedConnections OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of non-accelerated connections for the
service class. This is also available in the
GUI Service Class Statistics Detail page. This
counter is reset only on system restart.
"
::= { wsServiceClassStatsEntry 6 }
wsScsTotalNonAcceleratedOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of non-accelerated octets for the service class.
This is also available in the GUI Service Class Statistics
Detail page. This counter is reset only on system restart.
"
::= { wsServiceClassStatsEntry 7 }
wsScsTotalPreCompressionOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of accelerated octets for the service class before compression.
"
::= { wsServiceClassStatsEntry 8 }
wsScsCompressSentOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets sent for the service class after compression.
"
::= { wsServiceClassStatsEntry 9 }
wsScsCompressReceivedOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets received for the service class after compression.
"
::= { wsServiceClassStatsEntry 10 }
wsScsPreCompressSentOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets sent for the service class before compression.
"
::= { wsServiceClassStatsEntry 11 }
wsScsPreCompressReceivedOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated octets received for the service class before compression.
"
::= { wsServiceClassStatsEntry 12 }
wsScsSendBWSavings OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAN-side send bandwidth savings. 100% meant very high (above 99.5:1) compression.
0% meant no compression savings. The formula is
(Pre-compress-send-bytes - Compressed-send-bytes) / Pre-compress-send-bytes * 100%
"
::= { wsServiceClassStatsEntry 13 }
wsScsRecvBWSavings OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAN-side receive bandwidth savings. 100% meant very high (above 99.5:1) compression.
0% meant no compression savings. The formula is
(Pre-compress-received-bytes - Compressed-received-bytes) / Pre-compress-received-bytes * 100%
"
::= { wsServiceClassStatsEntry 14 }
wsScsSendRecvBWSavings OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Combined send and receive bandwidth savings. The formula is
(Pre-compress-bytes - Compressed-bytes) / Pre-compress-bytes * 100%
"
::= { wsServiceClassStatsEntry 15 }
wsScsSendCompressionRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAN-side send compression ratio per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.
"
::= { wsServiceClassStatsEntry 16 }
wsScsRecvCompressionRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"WAN-side receive compression ratio per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.
"
::= { wsServiceClassStatsEntry 17 }
wsScsSendRecvCompressionRatio OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Combined send and receive compression ratio per 1000 octets,
e.g. 3500 means 3.5 to 1 compression.
"
::= { wsServiceClassStatsEntry 18 }
--
-- Quality Of Service statistics table
--
wsQosTrafficClassStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsQosTcStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A list of QoS traffic class statistics.
"
::= { wsStatusMIBTables 3 }
wsQosTcStatsEntry OBJECT-TYPE
SYNTAX WsQosTcStatsEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"Each entry contains performance statistics for one QoS traffic class.
"
INDEX { wsQosIndex }
::= { wsQosTrafficClassStatsTable 1 }
WsQosTcStatsEntry ::= SEQUENCE {
wsQosIndex INTEGER,
wsQosName DisplayString,
wsQosConfiguredSendRatio INTEGER,
wsQosSentVolume Counter64,
wsQosActualSendRatio INTEGER
}
wsQosIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"This index uniquely identifies a QoS traffic class
in the QoS traffic class statistics table.
"
::= { wsQosTcStatsEntry 1 }
wsQosName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Name of the QoS traffic class, which is defined in the
GUI Configure Settings: QoS page.
"
::= { wsQosTcStatsEntry 2 }
wsQosConfiguredSendRatio OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The minimum share of the bandwidth configured for this
traffic class. This is also available in the
GUI QoS Statistics page.
"
::= { wsQosTcStatsEntry 3 }
wsQosSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The total volume of QoS traffic sent for this queue,
measured in 1000-octets. This counter may be reset from the
GUI QoS Statistics page. The wsQosStatsCollectionTime
variable indicates when the counter was reset.
"
::= { wsQosTcStatsEntry 4 }
wsQosActualSendRatio OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The bandwidth used by this traffic class. This is calculated
using the wsQosSentVolume for the traffic class divided by
the sum of wsQosSentVolume of all traffic classes.
"
::= { wsQosTcStatsEntry 5 }
--
-- ICA statistics table
--
wsIcaStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsIcaStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of ICA Traffic Presentation Layer statistics.
"
::= { wsStatusMIBTables 4 }
wsIcaStatsEntry OBJECT-TYPE
SYNTAX WsIcaStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the performance statistics for one ICA priority.
"
INDEX { wsIcaIndex }
::= { wsIcaStatsTable 1 }
WsIcaStatsEntry ::= SEQUENCE {
wsIcaIndex INTEGER,
wsIcaServiceName DisplayString,
wsIcaPriority INTEGER,
wsIcaSentVolume Counter64,
wsIcaSentRatio INTEGER,
wsIcaReceivedVolume Counter64,
wsIcaReceivedRatio INTEGER,
wsIcaSendRate INTEGER,
wsIcaReceiveRate INTEGER
}
wsIcaIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used as an index that uniquely identifies an ICA service
in the ICA Traffic Presentation Layer statistics table.
"
::= { wsIcaStatsEntry 1 }
wsIcaServiceName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the ICA service, which is also in the GUI QoS Statistics
page, Citrix ICA Traffic Presentation Layer Statistics section.
"
::= { wsIcaStatsEntry 2 }
wsIcaPriority OBJECT-TYPE
SYNTAX INTEGER {
high(0),
medium(1),
low(2),
background(3),
notApplicable(9999)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"The ICA Priorities: high is for realtime traffic,
medium is for interactive traffic, low is for bulk transfer traffic,
background is for the lowest priority traffic.
This is no longer applicable starting from release 6.0.
"
::= { wsIcaStatsEntry 3 }
wsIcaSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent for this ICA applications
measured in 1000-octets. This counter may be reset from the
GUI QoS Statistics page.
"
::= { wsIcaStatsEntry 4 }
wsIcaSentRatio OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sent volume as a percent share of the different ICA applications.
"
::= { wsIcaStatsEntry 5 }
wsIcaReceivedVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic received for this ICA application,
measured in 1000-octets. This counter may be reset from the
GUI QoS Statistics page.
"
::= { wsIcaStatsEntry 6 }
wsIcaReceivedRatio OBJECT-TYPE
SYNTAX INTEGER
UNITS "%"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The received volume as a percent share of the different priority of the
service. This counter may be reset from the GUI QoS Statistics page.
"
::= { wsIcaStatsEntry 7 }
wsIcaSendRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last minute send rate of this ICA application.
"
::= { wsIcaStatsEntry 8 }
wsIcaReceiveRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last minute receive rate of this ICA application.
"
::= { wsIcaStatsEntry 9 }
--
-- Adapter configuration table
--
wsAdapterTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsAdapterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of adapters configured for the unit. It is also in the GUI IP Address page.
"
::= { wsStatusMIBTables 5 }
wsAdapterEntry OBJECT-TYPE
SYNTAX WsAdapterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains performance statistics for one ADAPTER.
"
INDEX { wsAdapterIndex }
::= { wsAdapterTable 1 }
WsAdapterEntry ::= SEQUENCE {
wsAdapterIndex INTEGER,
wsAdapterName DisplayString,
wsAdapterEnabled INTEGER,
wsAdapterIp IpAddress,
wsAdapterNetmask IpAddress,
wsAdapterGateway IpAddress,
wsAdapterVirtualIp IpAddress,
wsAdapterVLanEnabled INTEGER,
wsAdapterVLanGroup INTEGER
}
wsAdapterIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is used as an index that uniquely identifies an adapter.
"
::= { wsAdapterEntry 1 }
wsAdapterName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Adapter name.
"
::= { wsAdapterEntry 2 }
wsAdapterEnabled OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Adapter state.
"
::= { wsAdapterEntry 3 }
wsAdapterIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Adapter IP address.
"
::= { wsAdapterEntry 4 }
wsAdapterNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Adapter network mask.
"
::= { wsAdapterEntry 5 }
wsAdapterGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Adapter gateway.
"
::= { wsAdapterEntry 6 }
wsAdapterVirtualIp OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" HA virtual IP address.
"
::= { wsAdapterEntry 7 }
wsAdapterVLanEnabled OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" VLAN state.
"
::= { wsAdapterEntry 8 }
wsAdapterVLanGroup OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" VLAN group ID.
"
::= { wsAdapterEntry 9 }
--
-- Link statistics table
--
wsLinkStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LinkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of link statistics.
"
::= { wsStatusMIBTables 6 }
linkStatsEntry OBJECT-TYPE
SYNTAX LinkStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the performance statistics for
one link.
"
INDEX { linkIndex }
::= { wsLinkStatsTable 1 }
LinkStatsEntry ::= SEQUENCE {
linkIndex INTEGER,
linkName DisplayString,
linkSentVolume Counter64,
linkReceivedVolume Counter64,
linkSentPackets Counter64,
linkReceivedPackets Counter64,
linkDroppedSentVolume Counter64,
linkDroppedReceivedVolume Counter64,
linkDroppedSentPackets Counter64,
linkDroppedReceivedPackets Counter64
}
linkIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index uniquely identifies a link in the
link statistics table.
"
::= { linkStatsEntry 1 }
linkName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the link.
"
::= { linkStatsEntry 2 }
linkSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { linkStatsEntry 3 }
linkReceivedVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic received on the link, measured
in 1000-octets.
"
::= { linkStatsEntry 4 }
linkSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets sent on the link.
"
::= { linkStatsEntry 5 }
linkReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets received on the link.
in 1000-octets.
"
::= { linkStatsEntry 6 }
linkDroppedSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total traffic not sent on the link due to QoS threshold,
measured in 1000-octets.
"
::= { linkStatsEntry 7 }
linkDroppedReceivedVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total received traffic dropped from the link due to QoS threshold,
measured in 1000-octets.
"
::= { linkStatsEntry 8 }
linkDroppedSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets not sent on the link due to QoS threshold.
"
::= { linkStatsEntry 9 }
linkDroppedReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received packets dropped from the link
due to QoS threshold.
"
::= { linkStatsEntry 10 }
--
-- Application statistics table
--
wsAppStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of link statistics.
"
::= { wsStatusMIBTables 7 }
appStatsEntry OBJECT-TYPE
SYNTAX AppStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the performance statistics for
one application on one link.
"
INDEX { appIndex }
::= { wsAppStatsTable 1 }
AppStatsEntry ::= SEQUENCE {
appIndex INTEGER,
appName DisplayString,
appId INTEGER,
appParentId INTEGER,
appGroupId INTEGER,
appSentVolume Counter64,
appReceivedVolume Counter64,
appSentPackets Counter64,
appReceivedPackets Counter64,
appDroppedSentVolume Counter64,
appDroppedReceiveVolume Counter64,
appDroppedSentPackets Counter64,
appDroppedReceivedPackets Counter64,
appSendRate INTEGER,
appReceiveRate INTEGER
}
appIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index uniquely identifies one application on a link.
"
::= { appStatsEntry 1 }
appName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the link.
"
::= { appStatsEntry 2 }
appId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique ID for application.
"
::= { appStatsEntry 3 }
appParentId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Parent application ID.
"
::= { appStatsEntry 4 }
appGroupId OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Bit mask, indicating the group which this application belong to.
"
::= { appStatsEntry 5 }
appSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { appStatsEntry 6 }
appReceivedVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { appStatsEntry 7 }
appSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { appStatsEntry 8 }
appReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link,
in 1000-octets.
"
::= { appStatsEntry 9 }
appDroppedSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total traffic not sent on the link due to QoS threshold,
in 1000-octets.
"
::= { appStatsEntry 10 }
appDroppedReceiveVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total received traffic dropped from the link due to QoS threshold,
in 1000-octets.
"
::= { appStatsEntry 11 }
appDroppedSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets not sent on the link due to QoS threshold.
"
::= { appStatsEntry 12 }
appDroppedReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received packets dropped from the link
due to QoS threshold.
"
::= { appStatsEntry 13 }
appSendRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last minute send rate of this application.
"
::= { appStatsEntry 14 }
appReceiveRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last minute receive rate of this application.
"
::= { appStatsEntry 15 }
--
-- Link level quality of service statistics table
--
wsQosStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF QosStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of QoS traffic class statistics.
"
::= { wsStatusMIBTables 8 }
qosStatsEntry OBJECT-TYPE
SYNTAX QosStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the performance statistics for
one QoS traffic class.
"
INDEX { qosIndex }
::= { wsQosStatsTable 1 }
QosStatsEntry ::= SEQUENCE {
qosIndex INTEGER,
qosPolicyName DisplayString,
qosLink DisplayString,
qosSentVolume Counter64,
qosReceiveVolume Counter64,
qosSentPackets Counter64,
qosReceivedPackets Counter64,
qosDroppedSentVolume Counter64,
qosDroppedReceiveVolume Counter64,
qosDroppedSentPackets Counter64,
qosDroppedReceivedPackets Counter64
}
qosIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index uniquely identifies a QoS traffic class
in the QoS traffic class statistics table.
"
::= { qosStatsEntry 1 }
qosPolicyName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the QoS Policy.
"
::= { qosStatsEntry 2 }
qosLink OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the link.
"
::= { qosStatsEntry 3 }
qosSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { qosStatsEntry 4 }
qosReceiveVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { qosStatsEntry 5 }
qosSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { qosStatsEntry 6 }
qosReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link,
in 1000-octets.
"
::= { qosStatsEntry 7 }
qosDroppedSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total traffic not sent on the link due to QoS threshold,
in 1000-octets.
"
::= { qosStatsEntry 8 }
qosDroppedReceiveVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total received traffic dropped from the link due to QoS threshold,
in 1000-octets.
"
::= { qosStatsEntry 9 }
qosDroppedSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets not sent on the link due to QoS threshold.
"
::= { qosStatsEntry 10 }
qosDroppedReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received packets dropped from the link
due to QoS threshold.
"
::= { qosStatsEntry 11 }
--
-- Link level service class statistics table
--
wsLscStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF LscStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of link level service class statistics.
"
::= { wsStatusMIBTables 9 }
lscStatsEntry OBJECT-TYPE
SYNTAX LscStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains the performance statistics for
one link level service class.
"
INDEX { lscIndex }
::= { wsLscStatsTable 1 }
LscStatsEntry ::= SEQUENCE {
lscIndex INTEGER,
lscServiceClassName DisplayString,
lscLink DisplayString,
lscSentVolume Counter64,
lscReceivedVolume Counter64,
lscSentPackets Counter64,
lscReceivedPackets Counter64,
lscDroppedSentVolume Counter64,
lscDroppedReceiveVolume Counter64,
lscDroppedSentPackets Counter64,
lscDroppedReceivedPackets Counter64
}
lscIndex OBJECT-TYPE
SYNTAX INTEGER(1 .. 2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This index is used to identify the link statistics
within a service class.
"
::= { lscStatsEntry 1 }
lscServiceClassName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the service class, e.g. HTTP, FTP, SMTP, CIFS, etc.
The list of service classes monitored is defined in the
GUI Configure Settings: Service Class page.
"
::= { lscStatsEntry 2 }
lscLink OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the link.
"
::= { lscStatsEntry 3 }
lscSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { lscStatsEntry 4 }
lscReceivedVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { lscStatsEntry 5 }
lscSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link, measured
in 1000-octets.
"
::= { lscStatsEntry 6 }
lscReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total volume of traffic sent on the link,
in 1000-octets.
"
::= { lscStatsEntry 7 }
lscDroppedSentVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total traffic not sent on the link due to QoS threshold,
in 1000-octets.
"
::= { lscStatsEntry 8 }
lscDroppedReceiveVolume OBJECT-TYPE
SYNTAX Counter64
UNITS "K-octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total received traffic dropped from the link due to QoS threshold,
in 1000-octets.
"
::= { lscStatsEntry 9 }
lscDroppedSentPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets not sent on the link due to QoS threshold.
"
::= { lscStatsEntry 10 }
lscDroppedReceivedPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of received packets dropped from the link
due to QoS threshold.
"
::= { lscStatsEntry 11 }
--
-- Repeater partner table
--
wsPartnerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PartnerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of CloudBridge partners
"
::= { wsStatusMIBTables 10 }
partnerEntry OBJECT-TYPE
SYNTAX PartnerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row contains information on one partner unit."
INDEX { partnerAddrType, partnerAddr }
::= { wsPartnerTable 1 }
PartnerEntry ::= SEQUENCE {
partnerAddrType InetAddressType,
partnerAddr InetAddress,
partnerConnections INTEGER,
partnerSendRate INTEGER,
partnerReceiveRate INTEGER,
partnerIdleTime TimeTicks
}
partnerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Format of partnerAddr, IPv4 or IPv6.
See RFC4001 for InetAddressType and InetAddress usage.
"
::= { partnerEntry 1}
partnerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Partner IP address."
::= { partnerEntry 2}
partnerConnections OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of accelerated connections to partner."
::= { partnerEntry 3}
partnerSendRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last minute send rate to partner."
::= { partnerEntry 4}
partnerReceiveRate OBJECT-TYPE
SYNTAX INTEGER
UNITS "bps"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last minute receive rate from partner."
::= { partnerEntry 5}
partnerIdleTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time where no traffic flows between this partner."
::= { partnerEntry 6}
--
-- Notifications
--
wsHAMasterIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The master router's real (primary) IP address. This is
the IP address listed as the source in VRRP advertisement
last received by this virtual router."
::= { wsStatusMIBObjects 3 }
wsSourceIpAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
" The IP address of the source of Alert.
"
::= { wsStatusMIBObjects 5 }
wsStatusMIBAlertTables OBJECT IDENTIFIER ::= { wsStatusMIBObjects 4 }
wsAlertAction OBJECT-TYPE
SYNTAX INTEGER {
oneShot(0),
set(1),
reset(2),
expired(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Action of the alert."
::= { wsStatusMIBAlertTables 1 }
wsAlertClass OBJECT-TYPE
SYNTAX INTEGER {
slowLossRate(0),
fastLossRate(1),
connectionStalled(2),
connectionTimeout(3),
connectionInvalid(4),
nicHalfDuplex(5),
arpTimeout(6),
badLicense(7),
limitExceeded(8),
asymmetric(9),
badPackets(10),
lowOnCpu(11),
lowOnMemory(12),
internal(13),
restartRequired(14),
vridNotSet(15),
haConfigurationChanged(16),
haNoSecondary(17),
haPairCommError(18),
haNotCapable(19),
haPeerVersion(20),
compressionError(21),
bwTypeMismatch(22),
cpuPegged(23),
lowOnVm(24),
numSlowRtosExceeded(25),
numFastRtosExceeded(26),
numBootoutsExceeded(27),
numRewindsExceeded(28),
diskDriveFailing(29),
diskDriveDegraded(30),
diskDriveFailed(31),
groupModeError(32),
nicBypassEvent(33),
haMisMatchVmip(34),
diskFragmented(35),
redirectorModeSyn(36),
unreachable(37),
dnsLookup(38),
redirectorModeFailure(39),
applianceInTheMiddle(40),
internalCritical(41),
internalMajor(42),
internalMinor(43),
internalWarning(44),
wccpMajor(45),
wccpMinor(46),
wccpWarning(47),
driverHung(48),
signalingChannelError(49),
scpsError(50),
plugInNearLimit(51),
sslError(52),
haDispositionError(53),
haVIPNotSet(54),
vlanNotSupported(55),
tooManyBadTcpChecksum(56),
invalidGateway(57),
haPeerKeyStoreLocked(58),
sslProxyMajor(59),
sslProxyMinor(60),
sslProxyWarning(61),
sslTunnelMajor(62),
sslTunnelMinor(63),
sslTunnelWarning(64),
excessiveIpFragments(65),
userAccountLocked(66),
smb2AccelerationFailure(67),
invalidBridgeConfig(68),
invalidHttpCachingConfigFile(69),
qosEngineError(70),
mapiNtlmError(71),
ethernetCrcError(72),
qosLinkConfigError(73),
maxUnacceleratedConnectionsExceeded(74),
badHardware(75)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Class of the alert."
::= { wsStatusMIBAlertTables 2 }
wsAlertMsg OBJECT-TYPE
SYNTAX AppAccelerationDescription
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Message of the alert."
::= { wsStatusMIBAlertTables 3 }
wsNotifyStart NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect,
wsPrimaryIp
}
STATUS current
DESCRIPTION
"An indication that the agent has started running."
::= { wsStatusMIBNotifications 1 }
wsNotifyShutdown NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect,
wsPrimaryIp
}
STATUS current
DESCRIPTION
"An indication that the agent is in the process of being shutdown."
::= { wsStatusMIBNotifications 2 }
wsNotifyRestart NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect
}
STATUS deprecated
DESCRIPTION
"An indication that the agent has been restarted."
::= { wsStatusMIBNotifications 3 }
wsHANotifyNewMaster NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect,
wsHAMasterIpAddr,
wsPrimaryIp
}
STATUS current
DESCRIPTION
"The newMaster trap indicates that the sending agent
has transitioned to 'Master' state."
::= { wsStatusMIBNotifications 4 }
wsNotifyAvailBWChange NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect
}
STATUS deprecated
DESCRIPTION
"And indication that available BW Has Changed"
::= { wsStatusMIBNotifications 5 }
wsNotifyUnexpectedRestart NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect,
wsPrimaryIp
}
STATUS current
DESCRIPTION
"An indication that the agent has been unexpectedly restarted."
::= { wsStatusMIBNotifications 6 }
wsNotifyPersistentError NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect,
wsPrimaryIp
}
STATUS current
DESCRIPTION
"The unit is experiencing a persistent internal error."
::= { wsStatusMIBNotifications 7 }
wsNotifyAlert NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect,
wsAlertAction,
wsAlertClass,
wsAlertMsg,
wsPrimaryIp
}
STATUS current
DESCRIPTION
"An alert is generated from the unit."
::= { wsStatusMIBNotifications 8 }
wsNotifyConfigurationChanged NOTIFICATION-TYPE
OBJECTS { wsActiveAlarmSeverity,
wsActiveAlarmSeqNum,
wsActiveAlarmDesc,
wsActiveAlarmServiceAffect,
wsPrimaryIp
}
STATUS current
DESCRIPTION
"An indication that the configuration has changed."
::= { wsStatusMIBNotifications 9 }
--
-- Conformance information
--
wsStatusMIBCompliances OBJECT IDENTIFIER ::= { wsStatusMIBConformance 1 }
wsStatusMIBGroups OBJECT IDENTIFIER ::= { wsStatusMIBConformance 2 }
-- Compliance statements
wsStatusCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION "The compliance statement for agents which
implement appAccelerationStatusMIB.
"
MODULE
MANDATORY-GROUPS {
wsStatusGroup,
wsStatusTrapGroup,
wsStatusNotifyGroup
}
::= { wsStatusMIBCompliances 1 }
--
-- Units of conformance
--
wsStatusGroup OBJECT-GROUP
OBJECTS {
wsOperStatus,
wsLoad1Min,
wsLoad5Min,
wsLoad15Min,
wsBypass,
wsLastAlarmSeqNum,
wsBoostStatus,
wsBandwidthMode,
wsBandwidthLimit,
wsWanOutOctets,
wsWanInOctets,
wsLanOutOctets,
wsLanInOctets,
wsCompressionEffectiveBandwidth,
wsSendCompressionRatio,
wsReceiveCompressionRatio,
wsCompressionStatsCollectionTime,
wsAcceleratedConnections,
wsNonAcceleratedConnections,
wsHaState,
wsHaVmIp,
wsHaSecondaryIp,
wsPrimaryIp,
wsCpuUsage,
wsConnectedPlugIns,
wsMaxPlugIns,
wsQosStatsCollectionTime,
wsUpTime,
wsSerialNumber,
wsNonAcceleratedVolume,
wsActiveConnections,
wsAccelerationStatus,
wsTrafficShapingStatus,
wsSystemLoad,
wsWanSendRate,
wsWanReceiveRate,
wsLanSendRate,
wsLanReceiveRate,
wsNonAcceleratedRate,
wsModelNumber,
wsWccpStatus,
wsActiveAlarmIndex,
wsActiveAlarmSeqNum,
wsActiveAlarmID,
wsActiveAlarmSeverity,
wsActiveAlarmLogTime,
wsActiveAlarmDesc,
wsActiveAlarmAcked,
wsActiveAlarmServiceAffect,
wsServiceClassIndex,
wsServiceClassName,
wsScsCurrentAcceleratedConnections,
wsScsTotalAcceleratedConnections,
wsScsTotalAcceleratedOctets,
wsScsTotalNonAcceleratedConnections,
wsScsTotalNonAcceleratedOctets,
wsScsTotalPreCompressionOctets,
wsScsCompressSentOctets,
wsScsCompressReceivedOctets,
wsScsPreCompressSentOctets,
wsScsPreCompressReceivedOctets,
wsScsSendBWSavings,
wsScsRecvBWSavings,
wsScsSendRecvBWSavings,
wsScsSendCompressionRatio,
wsScsRecvCompressionRatio,
wsScsSendRecvCompressionRatio,
wsQosIndex,
wsQosName,
wsQosConfiguredSendRatio,
wsQosSentVolume,
wsQosActualSendRatio,
wsIcaIndex,
wsIcaServiceName,
wsIcaPriority,
wsIcaSentVolume,
wsIcaSentRatio,
wsIcaReceivedVolume,
wsIcaReceivedRatio,
wsIcaSendRate,
wsIcaReceiveRate,
wsAdapterIndex,
wsAdapterName,
wsAdapterEnabled,
wsAdapterIp,
wsAdapterNetmask,
wsAdapterGateway,
wsAdapterVirtualIp,
wsAdapterVLanEnabled,
wsAdapterVLanGroup,
linkIndex,
linkName,
linkSentVolume,
linkReceivedVolume,
linkSentPackets,
linkReceivedPackets,
linkDroppedSentVolume,
linkDroppedReceivedVolume,
linkDroppedSentPackets,
linkDroppedReceivedPackets,
appIndex,
appName,
appId,
appParentId,
appGroupId,
appSentVolume,
appReceivedVolume,
appSentPackets,
appReceivedPackets,
appDroppedSentVolume,
appDroppedReceiveVolume,
appDroppedSentPackets,
appDroppedReceivedPackets,
appSendRate,
appReceiveRate,
qosIndex,
qosPolicyName,
qosLink,
qosSentVolume,
qosReceiveVolume,
qosSentPackets,
qosReceivedPackets,
qosDroppedSentVolume,
qosDroppedReceiveVolume,
qosDroppedSentPackets,
qosDroppedReceivedPackets,
lscIndex,
lscServiceClassName,
lscLink,
lscSentVolume,
lscReceivedVolume,
lscSentPackets,
lscReceivedPackets,
lscDroppedSentVolume,
lscDroppedReceiveVolume,
lscDroppedSentPackets,
lscDroppedReceivedPackets,
partnerAddrType,
partnerAddr,
partnerConnections,
partnerSendRate,
partnerReceiveRate,
partnerIdleTime
}
STATUS current
DESCRIPTION "A collection of objects used to retrieve status information
"
::= { wsStatusMIBGroups 1 }
wsStatusTrapGroup OBJECT-GROUP
OBJECTS {
wsHAMasterIpAddr,
wsAlertAction,
wsAlertClass,
wsAlertMsg
}
STATUS current
DESCRIPTION
"Conformance group for objects contained in VRRP notifications."
::= { wsStatusMIBGroups 2 }
wsStatusNotifyGroup OBJECT-GROUP
OBJECTS {
wsNotifyStart,
wsNotifyShutdown,
wsNotifyRestart,
wsHANotifyNewMaster,
wsNotifyAvailBWChange,
wsNotifyUnexpectedRestart,
wsNotifyPersistentError,
wsNotifyAlert
}
STATUS current
DESCRIPTION "A collection of the Notifications supported in
the status MIB."
::= { wsStatusMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink