snmp_mib_archive/s5tto116.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

978 lines
26 KiB
Plaintext
Executable File

-- SECTION 1: Top Level Definitions
S5-TOK-TOPOLOGY-MIB DEFINITIONS ::= BEGIN
-- 5000 Token Ring Topology MIB Release 1.1.5
-- Revision 10/14/98
-- Copyright 1995 Bay Networks, Inc.
-- All rights reserved.
-- This Bay Networks SNMP Management Information Base Specification
-- (Specification) embodies Bay Networks' confidential and
-- proprietary intellectual property. Bay Networks retains all
-- title and ownership in the Specification, including any
-- revisions.
-- This Specification is supplied "AS IS," and Bay Networks makes
-- no warranty, either express or implied, as to the use,
-- operation, condition, or performance of the Specification.
-- Imports
IMPORTS
IpAddress, TimeTicks
FROM RFC1155-SMI
OBJECT-TYPE
FROM RFC-1212
SnpxChassisType, SnpxBackplaneType
FROM SYNOPTICS-ROOT-MIB
s5TrTop
FROM S5-ROOT-MIB
MacAddress
FROM S5-TCS-MIB;
-- SECTION 2: MIB Objects
-- Interface Topology table
s5TrTopIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5TrTopIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table with topology status and control
for each token ring interface on the NMM. The
number of entries is determined by the number
of token ring interfaces on the NMM."
::= { s5TrTop 1 }
s5TrTopIfEntry OBJECT-TYPE
SYNTAX S5TrTopIfEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the table of topology status and
control for each token ring interface on the
NMM. Entries in the table can not be created
or deleted via SNMP."
INDEX { s5TrTopIfIpAddr }
::= { s5TrTopIfTable 1 }
S5TrTopIfEntry ::= SEQUENCE {
s5TrTopIfIpAddr IpAddress,
s5TrTopIfNum INTEGER,
s5TrTopIfStatus INTEGER,
s5TrTopIfNmmLstChg TimeTicks,
s5TrTopIfBdgLstChg TimeTicks,
s5TrTopIfRingNmmLstChg TimeTicks,
s5TrTopIfNmmMaxNum INTEGER,
s5TrTopIfNmmCurNum INTEGER,
s5TrTopIfBdgMaxNum INTEGER,
s5TrTopIfBdgCurNum INTEGER,
s5TrTopIfRingNmmMaxNum INTEGER,
s5TrTopIfRingNmmCurNum INTEGER,
s5TrTopIfTopSpeed INTEGER
}
s5TrTopIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the interface."
::= { s5TrTopIfEntry 1 }
s5TrTopIfNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex for the interface."
::= { s5TrTopIfEntry 2 }
s5TrTopIfStatus OBJECT-TYPE
SYNTAX INTEGER {
topOn(1),
topOff(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates if the interface is participating
in topology. The values are:
topOn(1)....topology is on
topOff(2)...topology is off
When the value is topOff(2) the status
of entries associated with the interface
is undefined. However, the agent should
make its best attempt when the value is
changed to topOff(2) to remove all
existing instances of topology MIB objects
for the interface. The agent must save
the setting of this object in nonvolatile
memory (i.e., save across reboots)."
::= { s5TrTopIfEntry 3 }
s5TrTopIfNmmLstChg OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime when the last
addition or deletion of an NMM topology
table entry associated with the interface
was done. If none have been done since
cold/warm start of the agent, then the
value is zero."
::= { s5TrTopIfEntry 4 }
s5TrTopIfBdgLstChg OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime when the last
addition or deletion of a bridge
topology table entry associated with the
interface was done. If none have been
done since cold/warm start of the
agent, then the value is zero."
::= { s5TrTopIfEntry 5 }
s5TrTopIfRingNmmLstChg OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of sysUpTime when the last
addition or deletion of a Ring NMM
topology table entry associated with
the interface was done. If none have
been done since cold/warm start
of the agent, then the value is zero."
::= { s5TrTopIfEntry 6 }
s5TrTopIfNmmMaxNum OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of entries for the
interface in the NMM topology table."
::= { s5TrTopIfEntry 7 }
s5TrTopIfNmmCurNum OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of entries for the
interface in the NMM topology table."
::= { s5TrTopIfEntry 8 }
s5TrTopIfBdgMaxNum OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of entries for the
interface in the bridge topology table."
::= { s5TrTopIfEntry 9 }
s5TrTopIfBdgCurNum OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of entries for the
interface in the bridge topology table."
::= { s5TrTopIfEntry 10 }
s5TrTopIfRingNmmMaxNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of entries for the
interface in the Ring NMM topology table."
::= { s5TrTopIfEntry 11 }
s5TrTopIfRingNmmCurNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of entries for the
interface in the Ring NMM topology table."
::= { s5TrTopIfEntry 12 }
s5TrTopIfTopSpeed OBJECT-TYPE
SYNTAX INTEGER {
other(1),
topFast(2),
topSlow(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Token Ring topology message (SONMP frame)
transmit speed. The values that are read/write are:
topFast(2)...short interval between transmitting
topSlow(3)...long interval between transmitting
The value that is readonly is:
other(1)...speed unknown, or other value
In fast mode, the SONMP frame transmit interval
is 10 seconds for all SONMP frames except
for ring master which is 5 seconds.
In slow mode, the interval is 15 seconds for ring
master SONMP frames, 50 seconds for concentrator
profile SONMP frames, 60 seconds for master NMM
announcement SONMP frames, and 70 seconds for
adjacent SONMP frames."
::= { s5TrTopIfEntry 13 }
-- Network Management Module (NMM) Topology Table
s5TrTopNmmTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5TrTopNmmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of topology information for each
Network Management Module (NMM) with a Token
Ring interface on the same 'flat network'
as the reporting NMM. The number of entries
is determined by the number of detected
(and active) NMMs. Entries in the table are
created by reception of a topology message
with information about a 'new' NMM. An entry
is removed from the table when an NMM is
not present in the topology message from
a ring, or when no topology messages are
received from a ring in the required time
interval."
::= { s5TrTop 2 }
s5TrTopNmmEntry OBJECT-TYPE
SYNTAX S5TrTopNmmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the table of topology information
about Network Management Modules (NMMs) with
a Token Ring interface on the same 'flat
network' as the reporting NMM. Entries in the
table can not be created or deleted via SNMP."
INDEX { s5TrTopNmmIfIpAddr,
s5TrTopNmmIpAddr }
::= { s5TrTopNmmTable 1 }
S5TrTopNmmEntry ::= SEQUENCE {
s5TrTopNmmIfIpAddr IpAddress,
s5TrTopNmmIpAddr IpAddress,
s5TrTopNmmRingNum INTEGER,
s5TrTopNmmRingMaster INTEGER,
s5TrTopNmmRingSpeed INTEGER,
s5TrTopNmmBridgeGroupIdentifier INTEGER,
s5TrTopNmmSlotNum INTEGER,
s5TrTopNmmPortNum INTEGER
}
s5TrTopNmmIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the interface on which
the topology message was received."
::= { s5TrTopNmmEntry 1 }
s5TrTopNmmIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of an NMM contained in
a topology message."
::= { s5TrTopNmmEntry 2 }
s5TrTopNmmRingNum OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ring number on which an NMM from a
topology message is located."
::= { s5TrTopNmmEntry 3 }
s5TrTopNmmRingMaster OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
master(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The classification of an NMM from
a topology message. The values are:
normal(1)...not a master NMM
master(2)...a master NMM"
::= { s5TrTopNmmEntry 4 }
s5TrTopNmmRingSpeed OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The speed of the ring (in units of Mbits)
on which an NMM from a topology message is
located. The expected values are:
4....4 Mbps
16...16 Mbps"
::= { s5TrTopNmmEntry 5 }
s5TrTopNmmBridgeGroupIdentifier OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The forwarding domain identification --
VLAN ID, if applicable, of the port on
which the SONMP message for this entry
was heard. The value shall be zero if
the entry is local, or if the port number
cannot be resolved."
::= {s5TrTopNmmEntry 6}
s5TrTopNmmSlotNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot number of the port on which the SONMP
message for this entry was heard. The value shall
be zero if the port number cannot be resolved."
::= {s5TrTopNmmEntry 7}
s5TrTopNmmPortNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port number of the port on which the SONMP
message for this entry was heard. The value shall
be zero if the port number cannot be resolved."
::= {s5TrTopNmmEntry 8}
-- Bridge Topology Table
s5TrTopBdgTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5TrTopBdgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table that lists each known bridge
with a Token Ring interface on the same
'flat net' as the reporting NMM. The
number of entries is determined by
the number of detected (and active)
bridges. Entries are added by reception of
a topology message from a bridge or reception
of a topology message from an master NMM that
was forwarded by a source routing bridge.
An entry is removed from the table when
no topology messaged are received from
bridge in the required time interval."
::= { s5TrTop 3 }
s5TrTopBdgEntry OBJECT-TYPE
SYNTAX S5TrTopBdgEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the table of known bridges
with a Token Ring interface on the same
'flat net' as the reporting NMM. Entries
in the table can not be created or deleted
via SNMP."
INDEX { s5TrTopBdgIfIpAddr,
s5TrTopBdgIndx }
::= {s5TrTopBdgTable 1 }
S5TrTopBdgEntry ::= SEQUENCE {
s5TrTopBdgIfIpAddr IpAddress,
s5TrTopBdgIndx INTEGER,
s5TrTopBdgNum INTEGER,
s5TrTopBdgOwnRingNum INTEGER,
s5TrTopBdgAdjRingNum INTEGER,
s5TrTopBdgAdjMasterNmmIpAddr IpAddress,
s5TrTopBdgMacAddr MacAddress,
s5TrTopBdgIpAddr IpAddress,
s5TrTopBdgType INTEGER,
s5TrTopBdgSlotNum INTEGER,
s5TrTopBdgPortNum INTEGER,
s5TrTopBdgNumPort INTEGER,
s5TrTopBdgHelloPortNum INTEGER,
s5TrTopBdgHelloPortStatus INTEGER,
s5TrTopBdgMonPortStatus INTEGER,
s5TrTopBdgHelloType INTEGER
}
s5TrTopBdgIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the interface on which
the topology message was received."
::= { s5TrTopBdgEntry 1 }
s5TrTopBdgIndx OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The index of the entry in the table
for the interface."
::= { s5TrTopBdgEntry 2 }
s5TrTopBdgNum OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IEEE 802.5 'bridge number' for
the bridge."
::= { s5TrTopBdgEntry 3 }
s5TrTopBdgOwnRingNum OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ring number for the reporting NMM.
NOTE: this will be the same value for all
table entries for each interface."
::= { s5TrTopBdgEntry 4 }
s5TrTopBdgAdjRingNum OBJECT-TYPE
SYNTAX INTEGER (0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ring number of the adjacent ring
that is joined by the bridge. The value
is zero if this entry in the table was
created due to the receipt of a topology
message from another NMM on a different
ring and the bridge connecting the rings
was a transparent only bridge and it does
not generate topology messages."
::= { s5TrTopBdgEntry 5 }
s5TrTopBdgAdjMasterNmmIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"If this entry was created (and/or validated)
by a topology message from a master NMM,
then the value is its IP address. If the
value of object s5TrTopBdgNum is non-zero,
then the master NMM is on an adjacent ring.
If the value of s5TrTopBdgNum is zero, then
the master NMM may be adjacent, or several
rings away, separated by one or more
transparent bridges.
The value for this object is 0.0.0.0 when the
bridge generates a topology message and
there is no master NMM on the adjacent ring
nor one connected to the adjacent ring through
one or more transparent bridges."
::= { s5TrTopBdgEntry 6 }
s5TrTopBdgMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the bridge port sending
the topology message. The value is
00:00:00:00:00:00 if the bridge does not
transmit topology messages."
::= { s5TrTopBdgEntry 7 }
s5TrTopBdgIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"IP address of the bridge sending the topology
message. The value is 0.0.0.0 if the bridge
does not transmit topology messages."
::= { s5TrTopBdgEntry 8 }
s5TrTopBdgType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
t3522Syn2Port(2),
t2722Syn2Port(3),
tCenTillionTrSwitch(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The kind of bridge this entry represents.
The values come from the topology messages
generated by the bridge. The values are:
other(1)...........bridge does not send topology
messages or is not a
defined type
t3522Syn2Port(2)...SynOptics 2 port bridge in
a modular concentrator
t2722Syn2Port(3)...SynOptics 2 port stand-alone
bridge
tCenTillionTrSwitch(4)...Centillion multi-port
TR switch"
::= { s5TrTopBdgEntry 9 }
s5TrTopBdgSlotNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot that the reporting NMM received the
topology message from the bridge. The value
zero is used to indicate that the bridge does
not transmit topology messages or the slot
from which the message was received can not be
determined."
::= { s5TrTopBdgEntry 10 }
s5TrTopBdgPortNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port that the reporting NMM received the
topology message from the bridge. The value
zero is used to indicate that the bridge does
not transmit topology messages or the port
from which the message was received can not
be determined."
::= { s5TrTopBdgEntry 11 }
s5TrTopBdgNumPort OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of ports installed on the
bridge. The value zero is used to indicate that
the bridge does not transmit topology messages."
::= { s5TrTopBdgEntry 12 }
s5TrTopBdgHelloPortNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port on the bridge from which the topology
message was sent. The value zero is used to
indicate that the bridge does not transmit
topology messages."
::= { s5TrTopBdgEntry 13 }
s5TrTopBdgHelloPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
tranAct(2),
tranStnBy(3),
srSrsOn(4),
srSrsOff(5),
srSrsOnTranAct(6),
srSrsOffTranAct(7),
srSrsOnStnBy(8),
srSrsOffStnBy(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the port on Bridge from which
the topology message was sent. The values are:
other(1).............bridge does not send topology
messages or port not in
defined status
tranAct(2)...........Transparent active
tranStnBy(3).........Transparent standby
srSrsOn(4)...........Source routing single route
spanning is on
srSrsOff(5)..........Source routing single route
spanning is off
srSrsOnTranAct(6)....Source routing single route
spanning is on, and
transparent active
srSrsOffTranAct(7)...Source routing single route
spanning is off, and
transparent active
srSrsOnStnBy(8)......Source routing single route
spanning is on, and
transparent standby
srSrsOffStnBy(9).....Source routing single route
spanning is off, and
transparent standby"
::= { s5TrTopBdgEntry 14 }
s5TrTopBdgMonPortStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
phantomOff(2),
phantomOn(3),
phantomOffWrapped(4),
phantomOnWrapped(5),
wrongSpeedWrap(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The status of the 'monitor' port on Bridge from
which the topology message was sent.
The values are:
other(1)...............bridge does not send topology
messages or the status of
the monitor port is unknown
or the bridge does not have
a monitor port, or some other
condition.
phantomOff(2)..........phantom status is off
phantomOn(3)...........phantom status is on
phantomOffWrapped(4)...phantom off and port wrapped
phantomOnWrapped(5)....phantom on and port wrapped
wrongSpeedWrap(6)......port wrapped for wrong speed"
::= { s5TrTopBdgEntry 15 }
s5TrTopBdgHelloType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
synoptics(2),
ibm(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of topology message received from the
bridge. The values are:
other..........bridge does not send any of the
recognizable topology message
types
synoptics(2)...bridge sends SynOptics' topology
message"
::= { s5TrTopBdgEntry 16 }
-- Same Ring NMM Topology Table
s5TrTopRingNmmTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5TrTopRingNmmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table listing all the Network Management
Modules (NMMs) with a Token Ring interface
on the same ring as the reporting NMM. The
number of entries is determined by the number
of detected (and active) NMMs. Entries are
created by reception of a topology message from
a 'new' NMM. An entry is removed from the table
when no topology messages are received from the
NMM in the required time interval."
::= { s5TrTop 4 }
s5TrTopRingNmmEntry OBJECT-TYPE
SYNTAX S5TrTopRingNmmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the table of Network Management
Modules (NMMs) with a Token Ring interface
on the same ring as the reporting NMM.
Entries in the table can not be created
or deleted via SNMP."
INDEX { s5TrTopRingNmmIfIpAddr,
s5TrTopRingNmmIpAddr }
::= {s5TrTopRingNmmTable 1 }
S5TrTopRingNmmEntry ::= SEQUENCE {
s5TrTopRingNmmIfIpAddr IpAddress,
s5TrTopRingNmmIpAddr IpAddress,
s5TrTopRingNmmMacAddr MacAddress,
s5TrTopRingNmmChassisType SnpxChassisType,
s5TrTopRingNmmBkplType SnpxBackplaneType,
s5TrTopRingNmmSlotNum INTEGER,
s5TrTopRingNmmUnaIpAddr IpAddress
}
s5TrTopRingNmmIfIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the interface on which
the topology message was received."
::= { s5TrTopRingNmmEntry 1 }
s5TrTopRingNmmIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the NMM that sent
the topology message."
::= { s5TrTopRingNmmEntry 2 }
s5TrTopRingNmmMacAddr OBJECT-TYPE
SYNTAX MacAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The MAC address of the NMM that sent
the topology message."
::= { s5TrTopRingNmmEntry 3 }
s5TrTopRingNmmChassisType OBJECT-TYPE
SYNTAX SnpxChassisType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of chassis containing the NMM
that sent the topology message."
::= { s5TrTopRingNmmEntry 4 }
s5TrTopRingNmmBkplType OBJECT-TYPE
SYNTAX SnpxBackplaneType
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of backplane in the chassis
containing the NMM that sent the topology
message."
::= { s5TrTopRingNmmEntry 5 }
s5TrTopRingNmmSlotNum OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The slot containing the NMM that sent the
topology message."
::= { s5TrTopRingNmmEntry 6 }
s5TrTopRingNmmUnaIpAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the next upstream NMM
of the NMM that sent the topology message."
::= { s5TrTopRingNmmEntry 7 }
-- Encoded Octet Strings for NMM Topology Table
s5TrTopNmmEosSize OBJECT-TYPE
SYNTAX INTEGER (0..1400)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current size of a 'row' in the table
s5TrTopNmmEosTable. This allows applications
to be able to break apart 'rows' in the table."
::= { s5TrTop 5 }
s5TrTopNmmEosTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5TrTopNmmEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of encoded octet strings of
entries in table s5TrTopNmmTable.
The number of entries is determined by the
packing of 'rows' from s5TrTopNmmTable."
::= { s5TrTop 6 }
s5TrTopNmmEosEntry OBJECT-TYPE
SYNTAX S5TrTopNmmEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the table of encoded octet
strings for table s5TrTopNmmTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned is the
instance of the last record
contained in the octet string.
Entries in the table can not be created
or deleted via SNMP."
INDEX { s5TrTopNmmIfIpAddr,
s5TrTopNmmIpAddr }
::= { s5TrTopNmmEosTable 1 }
S5TrTopNmmEosEntry ::= SEQUENCE {
s5TrTopNmmEos OCTET STRING
}
s5TrTopNmmEos OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1400))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An encoded octet string. On reads it contains
an integral number of 'rows' from table
s5TrTopNmmTable. All 'rows' are the same size
which is defined by object s5TrTopNmmEosSize."
::= { s5TrTopNmmEosEntry 1 }
-- Encoded Octet Strings for Bridge Topology Table
s5TrTopBdgEosSize OBJECT-TYPE
SYNTAX INTEGER (0..1400)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current size of a 'row' in the table
s5TrTopBdgEosTable. This allows applications
to be able to break apart 'rows' in the table."
::= { s5TrTop 7 }
s5TrTopBdgEosTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5TrTopBdgEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of encoded octet strings of
entries in table s5TrTopBdgTable.
The number of entries is determined by the
packing of 'rows' from s5TrTopBdgTable."
::= { s5TrTop 8 }
s5TrTopBdgEosEntry OBJECT-TYPE
SYNTAX S5TrTopBdgEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the table of encoded octet
strings for table s5TrTopBdgTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned is the
instance of the last record
contained in the octet string.
Entries in the table can not be created
or deleted via SNMP."
INDEX { s5TrTopBdgIfIpAddr,
s5TrTopBdgIndx }
::= { s5TrTopBdgEosTable 1 }
S5TrTopBdgEosEntry ::= SEQUENCE {
s5TrTopBdgEos OCTET STRING
}
s5TrTopBdgEos OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1400))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An encoded octet string. On reads it contains
an integral number of 'rows' from table
s5TrTopBdgEntry. All 'rows' are the same size
which is defined by object s5TrTopBdgEosSize."
::= { s5TrTopBdgEosEntry 1 }
-- Encoded Octet Strings for Same Ring NMM Topology Table
s5TrTopRingNmmEosSize OBJECT-TYPE
SYNTAX INTEGER (0..1400)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current size of a 'row' in the table
s5TrTopRingNmmEosTable. This allows applications
to be able to break apart 'rows' in the table."
::= { s5TrTop 9 }
s5TrTopRingNmmEosTable OBJECT-TYPE
SYNTAX SEQUENCE OF S5TrTopRingNmmEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of encoded octet strings of
entries in table s5TrTopRingNmmTable.
The number of entries is determined by the
packing of 'rows' from s5TrTopRingNmmTable."
::= { s5TrTop 10 }
s5TrTopRingNmmEosEntry OBJECT-TYPE
SYNTAX S5TrTopRingNmmEosEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A row in the table of encoded octet
strings for table s5TrTopRingNmmTable.
Instance returned in Response PDU:
On GETs: instance specified is the
instance returned.
On GET-NEXTs: instance returned is the
instance of the last record
contained in the octet string.
Entries in the table can not be created
or deleted via SNMP."
INDEX { s5TrTopRingNmmIfIpAddr,
s5TrTopRingNmmIpAddr }
::= { s5TrTopRingNmmEosTable 1 }
S5TrTopRingNmmEosEntry ::= SEQUENCE {
s5TrTopRingNmmEos OCTET STRING
}
s5TrTopRingNmmEos OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1400))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An encoded octet string. On reads it contains
an integral number of 'rows' from table
s5TrTopRingNmmTable. All 'rows' are the same size
which is defined by object s5TrTopNmmEosSize."
::= { s5TrTopRingNmmEosEntry 1 }
END