MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/cisco-nac-nad.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1879 lines
66 KiB
Plaintext
Executable File
Raw Blame History

-- *****************************************************************
-- Cisco NAD-NAC MIB
--
-- June, 2005 Liwei Lue
--
-- Copyright (c) 2005 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-NAC-NAD-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
StorageType,
RowStatus,
TruthValue,
MacAddress,
TimeStamp
FROM SNMPv2-TC
ifIndex,
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
InetPortNumber,
InetAddressType,
InetAddressPrefixLength,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
CiscoURLString
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI
;
ciscoNacNadMIB MODULE-IDENTITY
LAST-UPDATED "200506280000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-nac@cisco.com, cs-lan-switch-snmp@cisco.com"
DESCRIPTION
"This MIB module is for the configuration of a Network
Access Device (NAD) on the Cisco Network Admission
Control (NAC) system.
EndPoint -------------- NAD ------- AAA ------ PVS
(SecurApp) EAPoUDP/802.1x RADIUS HCAP
(Plugin)
(PA)
Cisco NAC system
The Cisco Network Admission Control (NAC) security
solution offers a systems approach to customers for
ensuring endpoint device compliancy and vulnerability
checks prior to production access to the network. Cisco
refers to these compliancy checks as posture
validations. The intent of this systems approach is to
prevent the spread of works, viruses, and rogue
applications across the network. This systems approach
requires integration with third party end point security
applications, as well as endpoint security servers.
The Network Access Device (NAD) enforces network access
control privileges by controlling which endpoint devices
have access to network destinations and services
reachable through that NAD. Endpoint devices that do
not have the PA installed, enabled, or cannot otherwise
respond to the NAD posture challenges are considered
non-responsive hosts. Upon recognition of an incoming
endpoint device at L2 or L3, the NAD issues a challenge
to the endpoint device for posture credentials. Endpoint
devices with a PA will recognize the challenge and
respond with the necessary posture credentials. The NAD
acts as a relay agent between the endpoint device and
AAA server for all messages in the posture validation
exchange. Once the validation is complete, the NAD
enforces the access policy profile downloaded from the
AAA Server, e.g. (i) provide full access (ii) deny all
access through the NAD restrict access (quarantine) or
(iii) some intermediate level of network access
restriction or quarantine. Between posture
revalidations, the NAD may issue periodic status queries
to determine that the each endpoint device using the NAD
is still the same device that was first postured, and
that the endpoint device's posture credentials have not
changed. This mechanism is a challenge response protocol
that does not involve the AAA Server nor does it require
the posture plugins to resend any credentials. It is
used to trigger a full posture revalidation with the AAA
Server when the endpoint device's credentials have
changed (e.g. to revalidate the host endpoint device
after remediation), or a new host endpoint device
connects with a previously authorized IP address. The
NAD supports a local exception list based on IP, MAC
address or device type so that certain endpoint devices
can bypass the posture validation process based on
system administrator configuration. Also, the NAD may be
configured to query the AAA server for access policies
associated with endpoint devices that do not have a
Posture Agent installed, clientless host endpoint
devices.
Posture Validation occurs when a NAC-enabled network
access device (NAC) detects an endpoint device
attempting to connect or use its network resources and
it issues the endpoint device a posture challenge. An
endpoint device with a resident posture agent will
respond to the challenge with sets of posture
credentials from one or more posture plugins which can
detail the state of the various hardware and software
components on the endpoint device. The posture agent
response is forwarded by the network access device to an
AAA server which may in turn delegate parts of the
decision to posture validation server. Evaluation of the
credentials against posture validation policies results
in an authorization decision or posture token,
representing the endpoint device's relative compliance
to the network compliance policy. The AAA server then
sends the respective network access profile to the
network access device for enforcement of the endpoint
device authorization.
The Cisco Technology consists of the following:
Endpoint Device - Any host attempting to connect or use
the resource of a network. - e.g., a personal computer,
personal data digital assistant, or data server, or
other network attached device.
NAD - Network Access Device that enforces network
access control policies through layer 2 or layer 3
challenge-responses with a network enabled Endpoint
device.
PC - Posture Credentials that describe the state of
an application and/or operating system that is running
on an endpoint device at the time a layer 2 or layer 3
challenge response is issued by a NAD.
PP - Posture Plugin. A module implemented by an
application or agent provider that is responsible for
supplying the relevant posture credentials for the
application or agent.
PA - Posture Agent. Host agent software that serves as
a broker on the host for aggregating credential from
potentially multiple posture plugins and communicating
with the network.
CTA - Cisco Trust Agent. Cisco's implementation of
the posture agent.
EAP - Extensible Authentication Protocol. An extension
to PPP.
EOU - Extensible Authentication Protocol over UDP.
ACS/AAA - Cisco Secure Access Control Server. The
primary authorization server that is the network policy
decision point and is extended to support posture
validation.
PVS - Posture Validation Server.
UCT - Un Conditional Transition.
Clientless - Client without Cisco Posture Agent."
REVISION "200506280000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 484 }
ciscoNacNadMIBNotifs OBJECT IDENTIFIER ::= { ciscoNacNadMIB 0 }
ciscoNacNadMIBObjects OBJECT IDENTIFIER ::= { ciscoNacNadMIB 1 }
ciscoNacNadMIBConformance OBJECT IDENTIFIER ::= { ciscoNacNadMIB 2 }
--
-- textual conventions
--
CnnEouPostureToken ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value for the posture token.
unknown(1) The posture credentials of the endpoint host
cannot be determined. The integrity of the
endpoint should be determined so proper posture
credentials can be attained and assessed for
network access authorization.
healthy(2) The host complies with the currently required
credentials so no restrictions need to be
placed on this device.
checkup(3) The host is within policy but doesn't have the
latest AV software; update recommended.
This profile state may be used to signal
management servers to proactively get this
machine into the 'healthy' state.
quarantine(4) The host is out of policy and needs to be
restricted to a remediation network.
This device is not actively placing a threat on
other host but is susceptible to attack or
infection and should be updated as soon as
possible.
infected(5) The host is an active threat to other hosts.
Network access should be severely restricted
and placed into remediation or totally denied
all network access."
SYNTAX INTEGER {
unknown(1),
healthy(2),
checkup(3),
quarantine(4),
infected(5)
}
CnnEouState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value for the EOU state.
initialize(1) State machine enters this state when a new
IP is learned on the port. Cleanup of the
port happens here as it can enter this state
as a result of CLI commands also. It
un-installs any previously configured policy
for that port, frees up any previously
allocated memory and does a UCT to 'hello'
State.
hello(2) In this state the device sends a hello
message to get the association ID of the CTA
and also to check whether a CTA exists at all.
It starts the hello timer and waits till that
time and if it doesn't get a response, it
retransmits the hello requests for max-retry
times before it declares the host as
'clientless'.
clientless(3) This state is received when hello response is
not reached and in this state the device does
a pseudo authentication to download the policy
for Non-Responsive hosts and stays in this
state.
eapRequest(4) In this state, the device sends EAP Validate
requests to the CTA and awaits response from
the CTA, it starts the retransmit timeout and
if response is not received before that timer
expires, it retransmits the EAP requests.
response(5) This state is received, when a response for
the EAP validate request is received from the
CTA. Device then builds a RADIUS request
incorporating the EAP packet and sends it to
the ACS and awaits response from the ACS.
If the response from the ACS is an access
challenge it moves the port the 'eapRequest'
state. But if it's a success, port is moved to
'authenticated' state. If its Access-Reject,
port is moved to 'fail' state.
authenticated(6) In this state policy installation happens and
port remains in this state until revalidation
event is triggered because of session timer
expiry or when status query fails. Status
query generation and response reception
happens in this state only.
fail(7) When posture validation fails, we start the
hold timer and device waits till it expires
before trying for posture validation again.
abort(8) This state could be reached because of
failing to complete posture validation
because of lack of response from CTA/RADIUS
or any other reason."
SYNTAX INTEGER {
initialize(1),
hello(2),
clientless(3),
eapRequest(4),
response(5),
authenticated(6),
fail(7),
abort(8)
}
CnnEouAuthType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Type of authentication type on NAD.
clientless(1) End point device that does not run Cisco
Trust Agent.
eap(2) Authorized via Extensible Authentication
Protocol.
static(3) statically authorized or rejected individual
end point device."
SYNTAX INTEGER {
clientless(1),
eap(2),
static(3)
}
CnnEouDeviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An enumerated value for the supported exempt device type on
NAD.
ciscoIpPhone(1)
"
SYNTAX INTEGER {
ciscoIpPhone(1)
}
cnnEouGlobalObjects OBJECT IDENTIFIER ::= { ciscoNacNadMIBObjects 1 }
cnnEouAuthorizeLists OBJECT IDENTIFIER ::= { ciscoNacNadMIBObjects 2 }
cnnEouIfMIBObjects OBJECT IDENTIFIER ::= { ciscoNacNadMIBObjects 3 }
cnnEouHostMIBObjects OBJECT IDENTIFIER ::= { ciscoNacNadMIBObjects 4 }
--
-- The cnnEouGlobalObjects group
--
cnnEouVersion OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of EOU in use on the local system.
Value zero indicates the version can not be determined."
::= { cnnEouGlobalObjects 1 }
cnnEouEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the posture validation via EOU is globally
enabled or disabled in the device."
::= { cnnEouGlobalObjects 2 }
cnnEouAllowClientless OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether to allow authentication of clientless
hosts (system that does not run Cisco Trust Agent)."
::= { cnnEouGlobalObjects 3 }
cnnEouAllowIpStationId OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It indicates whether to send the host IP address in the
calling station ID field of Radius request."
::= { cnnEouGlobalObjects 4 }
cnnEouLoggingEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"To enable or disable EOU system logging events.
Set to 'true' to enable syslog message at an informational level
(syslog level 6)."
::= { cnnEouGlobalObjects 5 }
cnnEouMaxRetry OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of maximum retry attempts for EOU."
::= { cnnEouGlobalObjects 6 }
cnnEouPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The UDP port for EOU. The port cannot conflict with
other UDP application. "
::= { cnnEouGlobalObjects 7 }
cnnEouRateLimit OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of clients that can be simultaneously
validated.
Set the rate limit to 0 (zero), rate limiting will be
turned off.
If the rate limit is set to 100 and there are 101 clients,
validation will not occur until one drop off."
::= { cnnEouGlobalObjects 8 }
cnnEouTimeoutAAA OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timeout period used by NAD with AAA (Authentication,
Authorization and Accounting."
::= { cnnEouGlobalObjects 9 }
cnnEouTimeoutHoldPeriod OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Length of time that can elapse before the client sessions
are purged from the system due to client inactivity."
::= { cnnEouGlobalObjects 10 }
cnnEouTimeoutRetransmit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period for the EOU message retransmitted."
::= { cnnEouGlobalObjects 11 }
cnnEouTimeoutRevalidation OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period for the revalidation. Setting this object
to 0 will globally disable periodic revalidation on this
device."
::= { cnnEouGlobalObjects 12 }
cnnEouTimeoutStatusQuery OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period for the status query after revalidation."
::= { cnnEouGlobalObjects 13 }
--
-- statically authorized device
--
cnnEouAuthIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF CnnEouAuthIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statically authorized IP devices in the system."
::= { cnnEouAuthorizeLists 1 }
cnnEouAuthIpEntry OBJECT-TYPE
SYNTAX CnnEouAuthIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the associated policy information of
the statically authorized IP device. An entry can be created,
or deleted by using cnnEouAuthIpRowStatus.
Each statically authorized IP device is associated with a
policy. By creating, deleting or modifying an entry in this
table, users can add, delete or modify a policy for a particular
statically authorized IP device.
In order to add the statically authorized IP device into
exception-list and associate with the specific policy, user has
to create an entry for the device."
INDEX { cnnEouAuthIpAddrType,
cnnEouAuthIpAddr }
::= { cnnEouAuthIpTable 1 }
CnnEouAuthIpEntry ::= SEQUENCE {
cnnEouAuthIpAddrType InetAddressType,
cnnEouAuthIpAddr InetAddress,
cnnEouAuthIpAddrMask InetAddressPrefixLength,
cnnEouAuthIpPolicy SnmpAdminString,
cnnEouAuthIpStorageType StorageType,
cnnEouAuthIpRowStatus RowStatus
}
cnnEouAuthIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of Internet address by which the statically
authorized IP device is reachable."
::= { cnnEouAuthIpEntry 1 }
cnnEouAuthIpAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address for the statically authorized IP device.
The type of this address is determined by the value of the
cnnEouAuthIpAddrType object."
::= { cnnEouAuthIpEntry 2 }
cnnEouAuthIpAddrMask OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Using 'inverse mask' to support IP wildcards. The mask used
with the source IP address will specify what traffic is exempted
from EAP validation.
e.g. cnnEouAuthIpAddr: 10.0.0.0
cnnEouAuthIpAddrMask: 0.255.255.255
This exempts any IP in the subnet at 10.x.x.x from posture
validation.
cnnEouAuthIpAddr: 10.1.2.1
cnnEouAuthIpAddrMask: 0.0.0.0
This exempts host IP 10.1.2.1 from posture validation.
cnnEouAuthIpAddr: 10.0.0.0
cnnEouAuthIpAddrMask: 255.255.255.255
Mask value of 255.255.255.255 will exempt ALL hosts from
posture validation."
::= { cnnEouAuthIpEntry 3 }
cnnEouAuthIpPolicy OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The policy associate with the statically authorized IP
device. The policy needs to be present in the policy-database
before an statically authorized IP device can be associated
to it."
::= { cnnEouAuthIpEntry 4 }
cnnEouAuthIpStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { nonVolatile }
::= { cnnEouAuthIpEntry 5 }
cnnEouAuthIpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create an entry, users set the value of this object to
'createAndGo'.
The transition from 'active' to 'notInService' may not be
supported.
A row may be deleted by setting the RowStatus to 'destroy'.
Once a row becomes active, values within the row cannot be
modified, except by deleting and re-creating the row."
::= { cnnEouAuthIpEntry 6 }
--
-- Mac Exception list
--
cnnEouAuthMacTable OBJECT-TYPE
SYNTAX SEQUENCE OF CnnEouAuthMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of static authorized devices identified by MAC address."
::= { cnnEouAuthorizeLists 2 }
cnnEouAuthMacEntry OBJECT-TYPE
SYNTAX CnnEouAuthMacEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the associated policy information of
the statically authorized device identified by MAC address.
The entry is created, and deleted by using
cnnEouAuthMacRowStatus."
INDEX { cnnEouAuthMacAddr }
::= { cnnEouAuthMacTable 1 }
CnnEouAuthMacEntry ::= SEQUENCE {
cnnEouAuthMacAddr MacAddress,
cnnEouAuthMacAddrMask MacAddress,
cnnEouAuthMacPolicy SnmpAdminString,
cnnEouAuthMacStorageType StorageType,
cnnEouAuthMacRowStatus RowStatus
}
cnnEouAuthMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MAC address of the static authorized device."
::= { cnnEouAuthMacEntry 1 }
cnnEouAuthMacAddrMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Using 'inverse mask' support MAC wildcards. The mask used
with the source MAC address will specify what traffic is
exempted from EAP validation.
e.g. cnnEouAuthMacAddr: 00:0d:bc:ef:eb:bd
cnnEouAuthMacAddrMask: 00:00:ff:ff:ff:ff
This exempts any MAC in the range 00:0d:00:00:00:00 from
posture validation.
cnnEouAuthMacAddr: 00:0d:bc:ef:eb:bd
cnnEouAuthMacAddrMask: 00:00:00:00:00:00
This exempts specific MAC 00:0d:bc:ef:eb:bd from posture
validation.
cnnEouAuthMacAddr: 00:0d:bc:ef:eb:bd
cnnEouAuthMacAddrMask: ff:ff:ff:ff:ff:ff
This exempts all MAC address from posture validation."
::= { cnnEouAuthMacEntry 2 }
cnnEouAuthMacPolicy OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The policy associate with the statically authorized device
identified by MAC address. The policy needs to be present
in the policy-database before an device can be associated to
it."
::= { cnnEouAuthMacEntry 3 }
cnnEouAuthMacStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { nonVolatile }
::= { cnnEouAuthMacEntry 4 }
cnnEouAuthMacRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
To create an entry, users set the value of this object to
'createAndGo'.
The transition from 'active' to 'notInService' may not be
supported.
A row may be deleted by setting the RowStatus to 'destroy'.
Once a row becomes active, values within the row cannot be
modified, except by deleting and re-creating the row."
::= { cnnEouAuthMacEntry 5 }
--
-- DeviceType Exception list
--
cnnEouAuthDeviceTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF CnnEouAuthDeviceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of static authorized devices indexed by device type."
::= { cnnEouAuthorizeLists 3 }
cnnEouAuthDeviceTypeEntry OBJECT-TYPE
SYNTAX CnnEouAuthDeviceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the information of the static authorized
device indexed by device type."
INDEX { cnnEouAuthDeviceType }
::= { cnnEouAuthDeviceTypeTable 1 }
CnnEouAuthDeviceTypeEntry ::= SEQUENCE {
cnnEouAuthDeviceType CnnEouDeviceType,
cnnEouAuthDeviceTypeStorageType StorageType,
cnnEouAuthDeviceTypeRowStatus RowStatus
}
cnnEouAuthDeviceType OBJECT-TYPE
SYNTAX CnnEouDeviceType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The static authorize device type."
::= { cnnEouAuthDeviceTypeEntry 1 }
cnnEouAuthDeviceTypeStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row."
DEFVAL { nonVolatile }
::= { cnnEouAuthDeviceTypeEntry 2 }
cnnEouAuthDeviceTypeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to create or delete an entry in the
cnnEouAuthDeviceTypeTable.
A row may be created using the 'CreateAndGo' option.
A row may be deleted by setting the RowStatus to 'destroy'.
Once a row becomes active, values within the row cannot be
modified, except by deleting and re-creating the row."
::= { cnnEouAuthDeviceTypeEntry 3 }
--
-- EAPoUDP Interface Configuration
--
cnnEouIfConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CnnEouIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of EOU configurations for the EOU capable interfaces."
::= { cnnEouIfMIBObjects 1 }
cnnEouIfConfigEntry OBJECT-TYPE
SYNTAX CnnEouIfConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing the EOU configuration information for a
particular EOU capable interface."
INDEX { ifIndex }
::= { cnnEouIfConfigTable 1 }
CnnEouIfConfigEntry ::= SEQUENCE {
cnnEouIfAdminStatus INTEGER,
cnnEouIfMaxRetry Integer32,
cnnEouIfValidateAction INTEGER,
cnnEouIfTimeoutGlobalConfig BITS,
cnnEouIfTimeoutAAA Unsigned32,
cnnEouIfTimeoutHoldPeriod Unsigned32,
cnnEouIfTimeoutRetransmit Unsigned32,
cnnEouIfTimeoutRevalidation Unsigned32,
cnnEouIfTimeoutStatusQuery Unsigned32
}
cnnEouIfAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
disabled(2),
bypass(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to 'auto' means the Posture Validation via
EOU ability at this interface would be enabled if a end point
device is found.
If the value of this object is 'disabled' then the interface
will act as it would if it had no posture validation via EOU
ability.
Setting this object to 'bypass' allows the host connected
to this interface this interface to bypass the Posture
Validation and directly download the host network access policy
from AAA server. "
::= { cnnEouIfConfigEntry 1 }
cnnEouIfMaxRetry OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of retry by EOU for this interface."
::= { cnnEouIfConfigEntry 2 }
cnnEouIfValidateAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
initialize(2),
revalidate(3),
noRevalidate(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An EOU validate action to the devices associated with the
interface.
This object always has the value 'none' when read.
none(1) no operation is performed.
initialize(2) Manually initiates reauthentication of all
the endpoint devices associated with the
interface.
revalidate(3) Revalidate EOU posture credentials of the
devices associated with a specify interface.
noRevalidate(4) Disable the revalidation of all the device
associated with the interface."
::= { cnnEouIfConfigEntry 3 }
cnnEouIfTimeoutGlobalConfig OBJECT-TYPE
SYNTAX BITS {
aaa(0),
holdPeriod(1),
retransmit(2),
revalidation(3),
statusQuery(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates whether the timeout configurations on
this interface are based on the corresponding global
timeout configurations or not.
aaa(0) If this bit is set, the value of
cnnEouIfTimeoutAAA is based on the
value of cnnEouTimeoutAAA.
holdPeriod(1) If this bit is set, the value of
cnnEouIfTimeoutHoldPeriod is based on the
value of cnnEouTimeoutHoldPeriod.
retransmit(2) If this bit is set, the value of
cnnEouIfTimeoutRetransmit is based on the
value of cnnEouTimeoutRetransmit.
revalidation(3) If this bit is set, the value of
cnnEouIfTimeoutRevalidation is based on the
value of cnnEouTimeoutRevalidation.
statusQuery(4) If this bit is set, the value of
cnnEouIfTimeoutStatusQuery is based on the
value of cnnEouTimeoutStatusQuery.
If a bit is not set, the value of the corresponding object
in the same conceptual row is not based on its corresponding
global object.
If users configure object which is covered by
cnnEouIfTimeoutGlobalConfig in the same conceptual row
while the corresponding bit is set, the corresponding bit will
be unset in order to reflect that such configuration is not
from its corresponding global object."
::= { cnnEouIfConfigEntry 4 }
cnnEouIfTimeoutAAA OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period used by EOU for the AAA server
connection on this interface."
::= { cnnEouIfConfigEntry 5 }
cnnEouIfTimeoutHoldPeriod OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The hold period of this interface. The hold period
is the length of the time that can elapse before the client
session entries are purged from the system due to client
inactivity."
::= { cnnEouIfConfigEntry 6 }
cnnEouIfTimeoutRetransmit OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period for the EOU message retransmitted at this
interface."
::= { cnnEouIfConfigEntry 7 }
cnnEouIfTimeoutRevalidation OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period for the revalidation at this interface.
Setting this object to 0 will disable periodic revalidation on
this device."
::= { cnnEouIfConfigEntry 8 }
cnnEouIfTimeoutStatusQuery OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The timeout period for the status query after revalidation at
this interface."
::= { cnnEouIfConfigEntry 9 }
--
-- Validation Action: Initialize, Revalidate, noRevalidate
--
cnnEouHostValidateAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
initializeAll(2),
initializeAuthClientless(3),
initializeAuthEap(4),
initializeAuthStatic(5),
initializeIp(6),
initializeMac(7),
initializePostureToken(8),
revalidateAll(9),
revalidateAuthClientless(10),
revalidateAuthEap(11),
revalidateAuthStatic(12),
revalidateIp(13),
revalidateMac(14),
revalidatePostureToken(15),
noRevalidateAll(16),
noRevalidateAuthClientless(17),
noRevalidateAuthEap(18),
noRevalidateAuthStatic(19),
noRevalidateIp(20),
noRevalidateMac(21),
noRevalidatePostureToken(22)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An EOU validate action to the devices.
Initialize: When a device is initialized, all previous state
information about that host is deleted and the admission
control process for that host will start with no state.
Revalidate: When a host is revalidated, state information about
that host is retained so that the host still has its' normal
access during the revalidation process.
This object always has the value 'none' when read.
none(1)
no operation is performed.
initializeAll(2)
to manually initiates reauthentication of all endpoint
devices on the system.
initializeAuthClientless(3)
to manually initiates reauthentication of all
clientless endpoint devices.
initializeAuthEap(4)
to manually initiates reauthentication of all the
endpoint devices authorized by Extensive Authentication
Protocol.
initializeAuthStatic(5)
to manually initiates reauthentication of all the
statically authorized endpoint devices.
initializeIp(6)
to manually initiates reauthentication of a specific
IP device. The value in cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
initializeMac(7)
to manually initiates reauthentication of the endpoint
device identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
initializePostureToken(8)
to manually initiates reauthentication of the endpoint
device(s) with a specify posture token assigned.
The value in cnnEouHostValidatePostureToken is used
by this operation.
revalidateAll(9)
to revalidate EOU posture credentials of all devices
on the system.
revalidateAuthClientless(10)
to revalidate EOU posture credentials of all clientless
devices on the system.
revalidateAuthEap(11)
to revalidate EOU posture credentials of the devices
authorized by EAP on the system.
revalidateAuthStatic(12)
to revalidate EOU posture credentials of all statically
authorized devices on the system.
revalidateIp(13)
to revalidates EOU posture credentials of a specific
IP device. The value in cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
revalidateMac(14)
to revalidates EOU posture credentials of a specific
device identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
revalidatePostureToken(15)
to enable revalidates EOU posture credentials of the
devices with the specific posture token assigned.
The value in cnnEouHostValidatePostureToken is used
by this operation.
noRevalidateAll(16)
to disable revalidation of all devices on the system.
noRevalidateAuthClientless(17)
to disable the revalidation of all clientless devices
on the system.
noRevalidateAuthEap(18)
to disable the revalidation of all devices authorized
by EAP on the system.
noRevalidateAuthStatic(19)
to disable the revalidation of all statically authorized
devices on the system.
noRevalidateIp(20)
to disable the revalidation of the specific IP device.
The value in cnnEouHostValidateIpAddrType and
cnnEouHostValidateIpAddr are used by this operation.
noRevalidateMac(21)
to disable the revalidation of the specific device
identified by MAC address. The value in
cnnEouHostValidateMacAddr is used by this operation.
noRevalidatePostureToken(22)
to disable the revalidation of all device with the
specific posture token assigned. The value in
cnnEouHostValidatePostureToken is used by this operation."
::= { cnnEouHostMIBObjects 1 }
cnnEouHostValidateIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The type of Internet address for a detected host."
::= { cnnEouHostMIBObjects 2 }
cnnEouHostValidateIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Internet address for a detected host. The type of this
address is determined by the value of the
cnnEouHostValidateIpAddrType."
::= { cnnEouHostMIBObjects 3 }
cnnEouHostVailidateMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Mac address for a detected host."
::= { cnnEouHostMIBObjects 4 }
cnnEouHostValidatePostureToken OBJECT-TYPE
SYNTAX CnnEouPostureToken
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of posture token for a detected host."
::= { cnnEouHostMIBObjects 5 }
--
-- EOU endpoint device query table
--
cnnEouHostMaxQueries OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum number of query entries allowed to be outstanding
at any time, in the cnnEouHostQueryTable."
::= { cnnEouHostMIBObjects 6 }
cnnEouHostQueryTable OBJECT-TYPE
SYNTAX SEQUENCE OF CnnEouHostQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A control table used to query the client host by
specifying retrieval criteria for the EOU information.
Each row instance in the table represents a query with
its parameters. The resulting data for each instance of
a query in this table is returned in the
cnnHostQueryResultTable.
The maximum number of entries (rows) in this table cannot
exceed the value of cnnEouHostMaxQueries object."
::= { cnnEouHostMIBObjects 7 }
cnnEouHostQueryEntry OBJECT-TYPE
SYNTAX CnnEouHostQueryEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the cnnEouHostQueryTable used to setup
retrieval criteria to search for the EOU hosts on the system.
The actual search is started by setting the value of
cnnEouHostQueryStatus to 'active'. Once a row becomes active,
values within the row cannot be modified, except by deleting
and re-creating the row."
INDEX { cnnEouHostQueryIndex }
::= { cnnEouHostQueryTable 1 }
CnnEouHostQueryEntry ::= SEQUENCE {
cnnEouHostQueryIndex Unsigned32,
cnnEouHostQueryMask INTEGER,
cnnEouHostQueryInterface InterfaceIndexOrZero,
cnnEouHostQueryIpAddrType InetAddressType,
cnnEouHostQueryIpAddr InetAddress,
cnnEouHostQueryMacAddr MacAddress,
cnnEouHostQueryPostureToken CnnEouPostureToken,
cnnEouHostQuerySkipNHosts Unsigned32,
cnnEouHostQueryMaxResultRows Unsigned32,
cnnEouHostQueryTotalHosts Integer32,
cnnEouHostQueryRows Integer32,
cnnEouHostQueryCreateTime TimeStamp,
cnnEouHostQueryStatus RowStatus
}
cnnEouHostQueryIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer in the range of 1 to cnnEouHostMaxQueries
to identify this control query."
::= { cnnEouHostQueryEntry 1 }
cnnEouHostQueryMask OBJECT-TYPE
SYNTAX INTEGER {
authenClientless(1),
authenEap(2),
authenStatic(3),
interface(4),
ip(5),
mac(6),
postureToken(7),
all(8)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting each value causes the appropriate action:
'authenClientless' causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current EOU
information for the clientless host(s) on the system.
'authenEap' causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current EOU
information for the hosts authorized by EAP on the system.
'authenStatic' causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current EOU
information for the statically authorized hosts on the system.
'interface' causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current EOU
information for the endpoint devices connected to the interface
specified in cnnEouHostQueryInterface.
'ip' causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current EOU
information for the IP hosts specified in
cnnEouHostQueryIpAddrType and cnnEouHostQueryIpAddr.
'mac' causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current EOU
information for the hosts matching the mac address specified in
cnnEouHostQueryMacAddr.
'postureToken' causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current EOU
information for the hosts assigned posture token specified in
cnnEouHostQueryPostureToken.
'all' returns all rows corresponding to all the detected
hosts in the system."
DEFVAL { all }
::= { cnnEouHostQueryEntry 2 }
cnnEouHostQueryInterface OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An index value that uniquely identifies an interface
where the end point device is connected.
The interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex."
REFERENCE "RFC 2863, ifIndex"
DEFVAL { 0 }
::= { cnnEouHostQueryEntry 3 }
cnnEouHostQueryIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The internet address type for the queried host."
DEFVAL { ipv4 }
::= { cnnEouHostQueryEntry 4 }
cnnEouHostQueryIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Internet address for the queried host. The type of this
address is determined by the value of the
cnnEouHostQueryIpAddrType.
If the 'ip' option of cnnEouHostQueryMask is selected, an
appropriate IP address type is assigned to
cnnEouHostQueryIpAddrType, and an appropriate IP address is
assigned to cnnEouHostQueryIpAddr then only the IP host with the
specified address will be containing in the result table."
DEFVAL { '00000000'H } -- 0.0.0.0
::= { cnnEouHostQueryEntry 5 }
cnnEouHostQueryMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Mac address for the queried host.
If the 'mac' option of cnnEouHostQueryMask is selected, an
appropriate MAC address is assigned to this object
then only the host with the specified MAC address will be
containing in the result table."
DEFVAL { '000000000000'H } -- 00:00:00:00:00:00
::= { cnnEouHostQueryEntry 6 }
cnnEouHostQueryPostureToken OBJECT-TYPE
SYNTAX CnnEouPostureToken
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The assigned posture token for the queried host.
If the 'postureToken' option of cnnEouHostQueryMask is selected,
an appropriate posture token is assigned to this object then
only the host with the specified posture token will be
containing in the result table."
DEFVAL { healthy }
::= { cnnEouHostQueryEntry 7 }
cnnEouHostQuerySkipNHosts OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The number of searched detected hosts to be skipped before
storing any host in cnnEouHostResultTable.
This object can be used along with cnnEouHostQueryTotalHosts
object to skip previously found hosts by setting the variable
equal to the number of the associated rows in
cnnEouHostResultTable, and only query the remaining hosts
in the table.
Note that due to the dynamical nature of the EOU, the queried
hosts may be missed or repeated by setting this object."
::= { cnnEouHostQueryEntry 8 }
cnnEouHostQueryMaxResultRows OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the maximum number of rows in the
cnnEouHostResultTable, resulting from this query.
A value of zero (0) indicates no limit rows in
cnnEouHostResultTable, resulting from this query."
::= { cnnEouHostQueryEntry 9 }
cnnEouHostQueryTotalHosts OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicating the total number of the hosts matching the query
criterion.
-1 - Either the query has not been started or the agent is
still processing this query instance. It is the default
value when the row is instantiated.
0..2147483647 - The search has ended and this is the number of
host matching the query criterion."
::= { cnnEouHostQueryEntry 10 }
cnnEouHostQueryRows OBJECT-TYPE
SYNTAX Integer32 (-1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicating the status of the query by following values:
-1 - Either the query has not been started or the agent is
still processing this query instance. It is the default
value when the row is instantiated.
0..2147483647 - The search has ended and this is the number of
rows in the cnnEouHostResultTable, resulting from this
query."
::= { cnnEouHostQueryEntry 11 }
cnnEouHostQueryCreateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time when this query was last set to active."
::= { cnnEouHostQueryEntry 12 }
cnnEouHostQueryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object used to manage rows in this table.
When set to 'createAndGo', the query is initiated.
The completion of the query is indicated by the value of
cnnEouHostQueryRows as soon as it becomes greater than or equal
to 0.
Once a row becomes active, values within the row cannot
be modified, except by deleting and re-creating it."
::= { cnnEouHostQueryEntry 13 }
--
-- EAPoUDP Host Query Result
--
cnnEouHostResultTable OBJECT-TYPE
SYNTAX SEQUENCE OF CnnEouHostResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing current detected host information
corresponding to all the completed queries set up in
the cnnEouHostQueryTable, that were detected in the device.
The query result will not become available until the current
search completes."
::= { cnnEouHostMIBObjects 8 }
cnnEouHostResultEntry OBJECT-TYPE
SYNTAX CnnEouHostResultEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of cnnEouHostResultTable, containing
posture validation information of an detected host that
matches the search criteria set in the corresponding row of
cnnEouHostQueryTable."
INDEX { cnnEouHostQueryIndex,
cnnEouHostResultIndex }
::= { cnnEouHostResultTable 1 }
CnnEouHostResultEntry ::= SEQUENCE {
cnnEouHostResultIndex Unsigned32,
cnnEouHostResultAssocIf InterfaceIndex,
cnnEouHostResultIpAddrType InetAddressType,
cnnEouHostResultIpAddr InetAddress,
cnnEouHostResultMacAddr MacAddress,
cnnEouHostResultAuthType CnnEouAuthType,
cnnEouHostResultPostureToken CnnEouPostureToken,
cnnEouHostResultAge Unsigned32,
cnnEouHostResultUrlRedir CiscoURLString,
cnnEouHostResultAclName SnmpAdminString,
cnnEouHostResultStatusQryPeriod Unsigned32,
cnnEouHostResultRevalidatePeriod Unsigned32,
cnnEouHostResultState CnnEouState
}
cnnEouHostResultIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A number which uniquely identifies a result entry
matching a particular query."
::= { cnnEouHostResultEntry 1 }
cnnEouHostResultAssocIf OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An index value that uniquely identifies an interface
where the end point device is currently connected.
The interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex."
REFERENCE "RFC 2863, ifIndex"
::= { cnnEouHostResultEntry 2 }
cnnEouHostResultIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Internet address by which the detected host
is reachable."
::= { cnnEouHostResultEntry 3 }
cnnEouHostResultIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The internet address for the detected host. The type
of this address is determined by the value of the
cnnEouHostResultIpAddrType object."
::= { cnnEouHostResultEntry 4 }
cnnEouHostResultMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates The MAC address of the detected host."
::= { cnnEouHostResultEntry 5 }
cnnEouHostResultAuthType OBJECT-TYPE
SYNTAX CnnEouAuthType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the authentication type used in
the posture validation process for this detected host."
::= { cnnEouHostResultEntry 6 }
cnnEouHostResultPostureToken OBJECT-TYPE
SYNTAX CnnEouPostureToken
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the posture token of the detected host.
During the posture validation process, the host will be
placed into a particular category and have a token assigned to
it. This assignment will depend on the state of the software
that is resident on the host. The host will have specific
right to access network based on the token assigned."
::= { cnnEouHostResultEntry 7 }
cnnEouHostResultAge OBJECT-TYPE
SYNTAX Unsigned32
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the length of time, in minutes, that host
has been connected."
::= { cnnEouHostResultEntry 8 }
cnnEouHostResultUrlRedir OBJECT-TYPE
SYNTAX CiscoURLString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the URL(Web page) where the latest
Anti-Virus file can be downloaded or upgraded, if the
detected host fails the credential validation then it
may require remediation."
::= { cnnEouHostResultEntry 9 }
cnnEouHostResultAclName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mapped ACL to this detected host. A character string for
an ACL (Access Control List) name. Valid characters are a-z,
A-Z, 0-9, ,'#', '-', '_' and '.'. Some devices may require
that an ACL name contains at least one non-numeric character.
ACL name is case sensitive."
::= { cnnEouHostResultEntry 10 }
cnnEouHostResultStatusQryPeriod OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout period, in seconds, for the status query after
revalidation at this interface."
::= { cnnEouHostResultEntry 11 }
cnnEouHostResultRevalidatePeriod OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timeout period, in second, for the revalidation at this
interface."
::= { cnnEouHostResultEntry 12 }
cnnEouHostResultState OBJECT-TYPE
SYNTAX CnnEouState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current EOU state of this detected host."
::= { cnnEouHostResultEntry 13 }
--
-- Notifications
--
-- no notifications defined
-- Conformance
ciscoNacNadMIBCompliances OBJECT IDENTIFIER
::= { ciscoNacNadMIBConformance 1 }
ciscoNacNadMIBGroups OBJECT IDENTIFIER
::= { ciscoNacNadMIBConformance 2 }
ciscoNacNadMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the CISCO-NAC-NAD-MIB.
OBJECT cnnEouAuthIpAddrType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
An implementation is only required to support IPv4
addresses."
MODULE
MANDATORY-GROUPS {
ciscoNacNadEouGlobalGroup,
ciscoNacNadEouAuthIpGroup,
ciscoNacNadEouIfConfigGroup,
ciscoNacNadEouHostGroup
}
GROUP ciscoNacNadEouIfTimeoutGroup
DESCRIPTION
"This group is mandatory only for the platforms which
support the timeout configuration on interface."
GROUP ciscoNacNadEouIfMaxRetryGroup
DESCRIPTION
"This group is mandatory only for the platforms which
support the max-retry configuration on interface."
GROUP ciscoNacNadEouRateLimitGroup
DESCRIPTION
"This group is mandatory only for the platforms which
support the rate-limit configuration."
GROUP ciscoNacNadEouIfAdminGroup
DESCRIPTION
"This group is mandatory only for the platforms which
support enabled/disabled/bypassed EOU feature on the
interface."
GROUP ciscoNacNadEouAuthMacGroup
DESCRIPTION
"This group is mandatory only for the platforms which
support the exempted MAC device with a policy associated."
GROUP ciscoNacNadEouAuthDeviceTypeGrp
DESCRIPTION
"This group is mandatory only for the platforms which support
statically authorize device identified by device type."
GROUP ciscoNacNadEouHostAgeGroup
DESCRIPTION
"This group is mandatory only for the platforms which
support the age information on the interface."
GROUP ciscoNacNadEouHostUrlRedir
DESCRIPTION
"This group is mandatory only for the platforms which
support the redirection URL information on the interface."
GROUP ciscoNacNadEouHostAclGroup
DESCRIPTION
"This group is mandatory only for the platforms which
support the ACL(Access Control List) information on the
interface."
OBJECT cnnEouEnabled
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cnnEouAllowIpStationId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cnnEouPort
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cnnEouHostResultIpAddrType
-- SYNTAX InetAddressType { ipv4(1) }
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
OBJECT cnnEouAuthIpStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cnnEouAuthMacStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT cnnEouAuthDeviceTypeStorageType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { ciscoNacNadMIBCompliances 1 }
--
-- Units of Conformance
--
ciscoNacNadEouGlobalGroup OBJECT-GROUP
OBJECTS {
cnnEouVersion,
cnnEouEnabled,
cnnEouAllowClientless,
cnnEouAllowIpStationId,
cnnEouLoggingEnabled,
cnnEouMaxRetry,
cnnEouPort,
cnnEouTimeoutAAA,
cnnEouTimeoutHoldPeriod,
cnnEouTimeoutRetransmit,
cnnEouTimeoutRevalidation,
cnnEouTimeoutStatusQuery
}
STATUS current
DESCRIPTION
"A collection of objects providing the global configuration on
the NAD."
::= { ciscoNacNadMIBGroups 1 }
ciscoNacNadEouAuthIpGroup OBJECT-GROUP
OBJECTS {
cnnEouAuthIpAddrMask,
cnnEouAuthIpPolicy,
cnnEouAuthIpStorageType,
cnnEouAuthIpRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the configuration for
the static authorization IP device with policy associated."
::= { ciscoNacNadMIBGroups 2 }
ciscoNacNadEouAuthMacGroup OBJECT-GROUP
OBJECTS {
cnnEouAuthMacAddrMask,
cnnEouAuthMacPolicy,
cnnEouAuthMacStorageType,
cnnEouAuthMacRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the configuration for
the static authorization MAC device with policy associated."
::= { ciscoNacNadMIBGroups 3 }
ciscoNacNadEouAuthDeviceTypeGrp OBJECT-GROUP
OBJECTS {
cnnEouAuthDeviceTypeStorageType,
cnnEouAuthDeviceTypeRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the configuration for
the static authorization device identified by device type."
::= { ciscoNacNadMIBGroups 4 }
ciscoNacNadEouIfConfigGroup OBJECT-GROUP
OBJECTS {
cnnEouIfValidateAction
}
STATUS current
DESCRIPTION
"A collection of objects providing the interface configuration
on the NAD."
::= { ciscoNacNadMIBGroups 5 }
ciscoNacNadEouHostGroup OBJECT-GROUP
OBJECTS {
cnnEouHostValidateAction,
cnnEouHostValidateIpAddrType,
cnnEouHostValidateIpAddr,
cnnEouHostVailidateMacAddr,
cnnEouHostValidatePostureToken,
cnnEouHostMaxQueries,
cnnEouHostQueryMask,
cnnEouHostQueryInterface,
cnnEouHostQueryIpAddrType,
cnnEouHostQueryIpAddr,
cnnEouHostQueryMacAddr,
cnnEouHostQueryPostureToken,
cnnEouHostQuerySkipNHosts,
cnnEouHostQueryMaxResultRows,
cnnEouHostQueryTotalHosts,
cnnEouHostQueryRows,
cnnEouHostQueryCreateTime,
cnnEouHostQueryStatus,
cnnEouHostResultAssocIf,
cnnEouHostResultIpAddrType,
cnnEouHostResultIpAddr,
cnnEouHostResultMacAddr,
cnnEouHostResultAuthType,
cnnEouHostResultPostureToken,
cnnEouHostResultStatusQryPeriod,
cnnEouHostResultRevalidatePeriod,
cnnEouHostResultState
}
STATUS current
DESCRIPTION
"A collection of objects providing the host configuration
on the NAD."
::= { ciscoNacNadMIBGroups 6 }
ciscoNacNadEouIfTimeoutGroup OBJECT-GROUP
OBJECTS {
cnnEouIfTimeoutGlobalConfig,
cnnEouIfTimeoutAAA,
cnnEouIfTimeoutHoldPeriod,
cnnEouIfTimeoutRetransmit,
cnnEouIfTimeoutRevalidation,
cnnEouIfTimeoutStatusQuery
}
STATUS current
DESCRIPTION
"A collection of objects providing the timeout configuration
on the interface."
::= { ciscoNacNadMIBGroups 7 }
ciscoNacNadEouIfMaxRetryGroup OBJECT-GROUP
OBJECTS {
cnnEouIfMaxRetry
}
STATUS current
DESCRIPTION
"A collection of objects providing the max-retry configuration
on the interface."
::= { ciscoNacNadMIBGroups 8 }
ciscoNacNadEouRateLimitGroup OBJECT-GROUP
OBJECTS {
cnnEouRateLimit
}
STATUS current
DESCRIPTION
"A collection of objects providing the rate limit
configuration."
::= { ciscoNacNadMIBGroups 9 }
ciscoNacNadEouIfAdminGroup OBJECT-GROUP
OBJECTS {
cnnEouIfAdminStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing the administrative
configuration on the interfaces."
::= { ciscoNacNadMIBGroups 10 }
ciscoNacNadEouHostAgeGroup OBJECT-GROUP
OBJECTS {
cnnEouHostResultAge
}
STATUS current
DESCRIPTION
"A collection of objects providing the age information
on the interface."
::= { ciscoNacNadMIBGroups 11 }
ciscoNacNadEouHostUrlRedir OBJECT-GROUP
OBJECTS {
cnnEouHostResultUrlRedir
}
STATUS current
DESCRIPTION
"A collection of objects providing the redirect URL
information on the interface."
::= { ciscoNacNadMIBGroups 12 }
ciscoNacNadEouHostAclGroup OBJECT-GROUP
OBJECTS {
cnnEouHostResultAclName
}
STATUS current
DESCRIPTION
"A collection of objects providing the ACL(Access Control List)
information on the interface."
::= { ciscoNacNadMIBGroups 13 }
END
Reference in New Issue View Git Blame Copy Permalink