MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/atom2.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

3090 lines
101 KiB
Plaintext
Executable File
Raw Blame History

ATM2-MIB DEFINITIONS ::= BEGIN
-- From file: "atm2.mi2"
-- Compile options "4 G A M"
IMPORTS
Gauge32, Counter32, Integer32
FROM SNMPv2-SMI-v1
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215
ifIndex
FROM RFC1213-MIB
TruthValue, RowStatus, TimeStamp, DisplayString
FROM SNMPv2-TC-v1
InterfaceIndex
FROM IF-MIB
atmMIB, atmMIBObjects
FROM ATM-TC-MIB
atmVpCrossConnectIndex, atmVpCrossConnectLowIfIndex, atmVpCrossConnectLowVpi,
atmVpCrossConnectHighIfIndex, atmVpCrossConnectHighVpi
FROM ATM-MIB
atmVcCrossConnectIndex, atmVcCrossConnectLowIfIndex, atmVcCrossConnectLowVpi,
atmVcCrossConnectLowVci, atmVcCrossConnectHighIfIndex, atmVcCrossConnectHighVpi,
atmVcCrossConnectHighVci
FROM ATM-MIB
atmInterfaceConfEntry, atmVplEntry, atmVplVpi,
atmVplOperStatus, atmVclEntry, atmVclVpi, atmVclVci,
atmVclOperStatus, atmVpCrossConnectEntry,
atmVcCrossConnectEntry
FROM ATM-MIB
AtmAddr, AtmSigDescrParamIndex, AtmInterfaceType,
AtmIlmiNetworkPrefix, AtmVcIdentifier, AtmVpIdentifier,
AtmTrafficDescrParamIndex
FROM ATM-TC-MIB;
atm2MIB OBJECT IDENTIFIER ::= { atmMIBObjects 14}
--atm2MIB OBJECT IDENTIFIER ::= { experimental XX }
-- MODULE-IDENTITY
-- LastUpdated
-- 9612051200Z
-- OrgName
-- IETF AToMMIB Working Group
-- ContactInfo
-- Faye Ly
-- Postal: 3Com Networks Inc.
-- Santa Clara, CA 95052
-- US
-- Tel: +1 408 764 6576
-- Fax: +1 408 495 2599
-- E-Mail: faye@3com.com
--
-- Michael Noto
-- Postal: Network Equipment Technologies
-- 800 Saginaw Drive RM 21.1.111
-- Redwood City, CA 94063
-- US
-- Tel: +1 415 569 7143
-- Fax: +1 908 758 4177
-- E-mail: mike_noto@net.com
--
-- Andrew Smith
-- Postal: Extreme Networks
-- 1601 S. De Anza Blvd, #220
-- Cupertino, CA 95014
-- US
-- Tel: +1 408 342 0985
-- Fax: +1 408 342 0989
-- E-Mail: ansmith@ix.netcom.com
--
-- Ethan Mickey Spiegel
-- Postal: Cisco Systems
-- 170 W. Tasman Drive
-- San Jose, CA 95134-1706
-- Tel: +1 408 526 6408
-- Fax: +1 408 526 6488
-- E-Mail: mspiegel@cisco.com
--
-- Kaj Tesink
-- Postal: Bell Communications Research
-- 331 Newman Springs Road
-- Red Bank, NJ 07701
-- US
-- Tel: +1 908 758 5254
-- Fax: +1 908 758 4177
-- E-mail: kaj@cc.bellcore.com
-- Descr
-- This MIB Module is a supplement to the
-- ATM-MIB [1].
atm2MIBObjects OBJECT IDENTIFIER ::= { atm2MIB 1 }
atm2MIBTraps OBJECT IDENTIFIER ::= { atm2MIB 2 }
atmPvcTraps OBJECT IDENTIFIER ::= { atm2MIBTraps 1 }
atmPvcTrapsPrefix OBJECT IDENTIFIER ::= { atmPvcTraps 0 }
atm2MIBConformance OBJECT IDENTIFIER ::= { atm2MIB 3 }
atm2MIBGroups OBJECT IDENTIFIER ::= { atm2MIBConformance 1 }
atm2MIBCompliances OBJECT IDENTIFIER ::= { atm2MIBConformance 2 }
atmSvcVpCrossConnectTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSvcVpCrossConnectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ATM SVPC Cross Connect table. A
bi-directional VP cross-connect between two
switched VPLs is modeled as one entry in this
table. A Soft PVPC cross-connect, between a
soft permanent VPL and a switched VPL, is
also modeled as one entry in this table."
::= { atm2MIBObjects 1 }
atmSvcVpCrossConnectEntry OBJECT-TYPE
SYNTAX AtmSvcVpCrossConnectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ATM SVPC Cross Connect table.
This entry is used to model a bi-directional
ATM VP cross-connect between two VPLs."
INDEX { atmSvcVpCrossConnectIndex, atmSvcVpCrossConnectLowIfIndex, atmSvcVpCrossConnectLowVpi, atmSvcVpCrossConnectHighIfIndex, atmSvcVpCrossConnectHighVpi }
::= { atmSvcVpCrossConnectTable 1 }
AtmSvcVpCrossConnectEntry ::= SEQUENCE {
atmSvcVpCrossConnectIndex INTEGER,
atmSvcVpCrossConnectLowIfIndex InterfaceIndex,
atmSvcVpCrossConnectLowVpi AtmVpIdentifier,
atmSvcVpCrossConnectHighIfIndex InterfaceIndex,
atmSvcVpCrossConnectHighVpi AtmVpIdentifier,
atmSvcVpCrossConnectCreationTime TimeStamp,
atmSvcVpCrossConnectRowStatus RowStatus
}
atmSvcVpCrossConnectIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value to identify this SVPC cross-connect."
::= { atmSvcVpCrossConnectEntry 1 }
atmSvcVpCrossConnectLowIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
-- Rsyntax Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
SVPC cross-connect. The term low implies
that this ATM interface has the numerically lower
ifIndex value than the other ATM interface
identified in the same atmSvcVpCrossConnectEntry."
::= { atmSvcVpCrossConnectEntry 2 }
atmSvcVpCrossConnectLowVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
-- Rsyntax INTEGER(0..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to the VPI
value associated with the SVPC cross-connect
at the ATM interface that is identified by
atmSvcVpCrossConnectLowIfIndex. The VPI value
cannot exceed the number supported by the
atmInterfaceMaxVpiBits at the low ATM interface
port."
::= { atmSvcVpCrossConnectEntry 3 }
atmSvcVpCrossConnectHighIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
-- Rsyntax Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to MIB II's
ifIndex value of the ATM interface port for
this SVC VP cross-connect. The term high
implies that this ATM interface has the
numerically higher ifIndex value than the
other ATM interface identified in the same
atmSvcVpCrossConnectEntry."
::= { atmSvcVpCrossConnectEntry 4 }
atmSvcVpCrossConnectHighVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
-- Rsyntax INTEGER(0..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to the VPI
value associated with the SVPC cross-connect
at the ATM interface that is identified by
atmSvcVpCrossConnectHighIfIndex. The VPI value
cannot exceed the number supported by the
atmInterfaceMaxVpiBits at the high ATM interface
port."
::= { atmSvcVpCrossConnectEntry 5 }
atmSvcVpCrossConnectCreationTime OBJECT-TYPE
SYNTAX TimeStamp
-- Rsyntax TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of MIB II's sysUpTime object
at the time this bi-directional SVPC
cross-connect was created. If the current
state was entered prior to the last
re-initialization of the agent, then this
object contains a zero value."
::= { atmSvcVpCrossConnectEntry 6 }
atmSvcVpCrossConnectRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to delete rows in the
atmSvcVpCrossConnectTable."
::= { atmSvcVpCrossConnectEntry 7 }
atmSvcVcCrossConnectTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSvcVcCrossConnectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ATM SVCC Cross Connect table. A
bi-directional VC cross-connect between two
switched VCLs is modeled as one entry in
this table. A Soft PVCC cross-connect,
between a soft permanent VCL and a switched
VCL, is also modeled as one entry in this
table."
::= { atm2MIBObjects 2 }
atmSvcVcCrossConnectEntry OBJECT-TYPE
SYNTAX AtmSvcVcCrossConnectEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ATM SVCC Cross Connect table.
This entry is used to model a bi-directional ATM
VC cross-connect between two VCLs."
INDEX { atmSvcVcCrossConnectIndex, atmSvcVcCrossConnectLowIfIndex, atmSvcVcCrossConnectLowVpi, atmSvcVcCrossConnectLowVci, atmSvcVcCrossConnectHighIfIndex, atmSvcVcCrossConnectHighVpi, atmSvcVcCrossConnectHighVci }
::= { atmSvcVcCrossConnectTable 1 }
AtmSvcVcCrossConnectEntry ::= SEQUENCE {
atmSvcVcCrossConnectIndex INTEGER,
atmSvcVcCrossConnectLowIfIndex InterfaceIndex,
atmSvcVcCrossConnectLowVpi AtmVpIdentifier,
atmSvcVcCrossConnectLowVci AtmVcIdentifier,
atmSvcVcCrossConnectHighIfIndex InterfaceIndex,
atmSvcVcCrossConnectHighVpi AtmVpIdentifier,
atmSvcVcCrossConnectHighVci AtmVcIdentifier,
atmSvcVcCrossConnectCreationTime TimeStamp,
atmSvcVcCrossConnectRowStatus RowStatus
}
atmSvcVcCrossConnectIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value to identify this SVCC cross-connect."
::= { atmSvcVcCrossConnectEntry 1 }
atmSvcVcCrossConnectLowIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
-- Rsyntax Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to MIB II's
ifIndex value of the ATM interface port for this
SVCC cross-connect. The term low implies that
this ATM interface has the numerically lower
ifIndex value than the other ATM interface
identified in the same atmSvcVcCrossConnectEntry."
::= { atmSvcVcCrossConnectEntry 2 }
atmSvcVcCrossConnectLowVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
-- Rsyntax INTEGER(0..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to the VPI
value associated with the SVCC cross-connect
at the ATM interface that is identified by
atmSvcVcCrossConnectLowIfIndex. The VPI value
cannot exceed the number supported by the
atmInterfaceMaxVpiBits at the low ATM interface
port."
::= { atmSvcVcCrossConnectEntry 3 }
atmSvcVcCrossConnectLowVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
-- Rsyntax INTEGER(0..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to the VCI
value associated with the SVCC cross-connect
at the ATM interface that is identified by
atmSvcVcCrossConnectLowIfIndex. The VCI value
cannot exceed the number supported by the
atmInterfaceMaxVciBits at the low ATM interface
port."
::= { atmSvcVcCrossConnectEntry 4 }
atmSvcVcCrossConnectHighIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
-- Rsyntax Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to MIB II's
ifIndex value for the ATM interface port for
this SVCC cross-connect. The term high implies
that this ATM interface has the numerically
higher ifIndex value than the other ATM interface
identified in the same atmSvcVcCrossConnectEntry."
::= { atmSvcVcCrossConnectEntry 5 }
atmSvcVcCrossConnectHighVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
-- Rsyntax INTEGER(0..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to the VPI
value associated with the SVCC cross-connect
at the ATM interface that is identified by
atmSvcVcCrossConnectHighIfIndex. The VPI value
cannot exceed the number supported by the
atmInterfaceMaxVpiBits at the high ATM interface
port."
::= { atmSvcVcCrossConnectEntry 6 }
atmSvcVcCrossConnectHighVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
-- Rsyntax INTEGER(0..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is equal to the VCI
value associated with the SVCC cross-connect
at the ATM interface that is identified by
atmSvcVcCrossConnectHighIfIndex. The VCI value
cannot exceed the number supported by the
atmInterfaceMaxVciBits at the high ATM interface
port."
::= { atmSvcVcCrossConnectEntry 7 }
atmSvcVcCrossConnectCreationTime OBJECT-TYPE
SYNTAX TimeStamp
-- Rsyntax TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of MIB II's sysUpTime object
at the time this bi-directional SVCC
cross-connect was created. If the current
state was entered prior to the last
re-initialization of the agent, then this
object contains a zero value."
::= { atmSvcVcCrossConnectEntry 8 }
atmSvcVcCrossConnectRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to delete rows in the
atmSvcVcCrossConnectTable."
::= { atmSvcVcCrossConnectEntry 9 }
atmSigStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSigStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains ATM interface signalling monitoring
, one entry per ATM signalling interface."
::= { atm2MIBObjects 3 }
atmSigStatEntry OBJECT-TYPE
SYNTAX AtmSigStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This list contains signalling statistics variables."
INDEX { ifIndex }
::= { atmSigStatTable 1 }
AtmSigStatEntry ::= SEQUENCE {
atmSigSSCOPConEvents Counter32,
atmSigSSCOPErrdPdus Counter32,
atmSigDetectSetupAttempts Counter32,
atmSigEmitSetupAttempts Counter32,
atmSigDetectUnavailRoutes Counter32,
atmSigEmitUnavailRoutes Counter32,
atmSigDetectUnavailResrcs Counter32,
atmSigEmitUnavailResrcs Counter32,
atmSigDetectCldPtyEvents Counter32,
atmSigEmitCldPtyEvents Counter32,
atmSigDetectMsgErrors Counter32,
atmSigEmitMsgErrors Counter32,
atmSigDetectClgPtyEvents Counter32,
atmSigEmitClgPtyEvents Counter32,
atmSigDetectTimerExpireds Counter32,
atmSigEmitTimerExpireds Counter32,
atmSigDetectRestarts Counter32,
atmSigEmitRestarts Counter32,
atmSigInEstabls Counter32,
atmSigOutEstabls Counter32
}
atmSigSSCOPConEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SSCOP Connection Events Counter. This
counter counts the sum of the following errors:
1) SSCOP Connection Disconnect Counter
The abnormal occurrence of this event is
characterized by the expiry of Timer_NO_RESPONSE.
(This event is communicated to the layer management
with MAA-ERROR code P. See ITU-T Q.2110 [13].)
2) SSCOP Connection Initiation Failure
This condition indicates the inability to establish
an SSCOP connection. This event occurs whenever the
number of expiries of the connection control timer
(Timer_CC) exceeds the MaxCC or upon receipt of a
connection reject message BGREJ PDU. (This event is
communicated to layer management with MAA-ERROR
code O. See ITU-T Q.2110.)
3) SSCOP Connection Re-Establ/Resynch
This event occurs upon receipt of a BGN PDU or RESYNC
PDU."
::= { atmSigStatEntry 1 }
atmSigSSCOPErrdPdus OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"SSCOP Errored PDUs Counter. This counter counts the
sum of the following errors:
1) Invalid PDUs.
These are defined in SSCOP and consist of PDUs
with incorrect length (MAA-ERROR code U),
undefined PDU type code or not 32-bit aligned.
2) PDUs that result in MAA error codes and are
discarded
See Errors A-M and Q-T defined in ITU-T Q.2110 [13]."
::= { atmSigStatEntry 2 }
atmSigDetectSetupAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Call Setup Attempts Counter. This counter counts
the number of call setup attempts(both successful
and unsuccessful) detected on this interface."
::= { atmSigStatEntry 3 }
atmSigEmitSetupAttempts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Call Setup Attempts Counter. This counter counts the
number of call setup attempts(both successful and
unsuccessful) transmitted on this interface."
::= { atmSigStatEntry 4 }
atmSigDetectUnavailRoutes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Route Unavailability detected on this
interface. This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded by a RELEASE
mesg for the same call), ADD PARTY REJECT, or STATUS
message that contains one of the following cause code
values is received (Note: These cause values apply to
both UNI3.0 and UNI3.1):
Cause Value Meaning
1 unallocated (unassigned) number
2 no route to specified transit network
3 no route to destination
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 5 }
atmSigEmitUnavailRoutes OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Route Unavailability transmitted from this
interface. This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded by a RELEASE
mesg for the same call), ADD PARTY REJECT, or STATUS
message that contains one of the following cause code
values is transmitted (Note: These cause values apply
to both UNI3.0 and UNI3.1):
Cause Value Meaning
1 unallocated (unassigned) number
2 no route to specified transit network
3 no route to destination
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 6 }
atmSigDetectUnavailResrcs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Resource Unavailability detected on this
interfrace. This counter is incremented when a
RELEASE, RELEASE COMPLETE (only when not preceded by a
RELEASE mesg for the same call), ADD PARTY REJECT, or
STATUS message that contains one of the following cause
code values is received (Note: These cause values apply
to both UNI3.0 and UNI3.1 unless otherwise stated):
Cause Value Meaning
35 requested VPCI/VCI not available
37 user cell rate not available (UNI3.1
only)
38 network out of order
41 temporary failure
45 no VPCI/VCI available
47 resource unavailable, unspecified
49 Quality of Service unavailable
51 user cell rate not available (UNI3.0
only)
58 bearer capability not presently
available
63 Service or option not available,
unspecified
92 too many pending add party requests
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 7 }
atmSigEmitUnavailResrcs OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Resource Unavailability transmitted from
this interfrace. This counter is incremented when a
RELEASE, RELEASE COMPLETE (only when not preceded by a
RELEASE mesg for the same call), ADD PARTY REJECT, or
STATUS message that contains one of the following cause
code values is transmitted (Note: These cause values
apply to both UNI3.0 and UNI3.1 unless otherwise
stated):
Cause Value Meaning
35 requested VPCI/VCI not available
37 user cell rate not available (UNI3.1
only)
38 network out of order
41 temporary failure
45 no VPCI/VCI available
47 resource unavailable, unspecified
49 Quality of Service unavailable
51 user cell rate not available (UNI3.0
only)
58 bearer capability not presently
available
63 Service or option not available,
unspecified
92 too many pending add party requests
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 8 }
atmSigDetectCldPtyEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Called Party Responsible For Unsuccessful
Call detected on this interface. This counter is
incremented when a RELEASE, RELEASE COMPLETE (only when
not preceded by a RELEASE mesg for the same call), ADD
PARTY REJECT, or STATUS message that contains one of
the following cause code values is received (Note:
These cause values apply to both UNI3.0 and UNI3.1):
Cause Value Meaning
17 user busy
18 no user responding
21 call rejected
22 number changed
23 user rejects all calls with calling
line id restriction (CLIR)
27 destination out of order
31 normal, unspecified
88 incompatible destination
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted.
Note: Cause Value #30 'response to STATUS ENQUIRY'
was not included in this memo since it did not apply
to a hard failure."
::= { atmSigStatEntry 9 }
atmSigEmitCldPtyEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Called Party Responsible For Unsuccessful Call
transmitted from this interface. This counter is
incremented when a RELEASE, RELEASE COMPLETE (only
when not preceded by a RELEASE mesg for the same call),
ADD PARTY REJECT, or STATUS message that contains one
of the following cause code values is
transmitted (Note: These cause values apply to both
UNI3.0 and UNI3.1):
Cause Value Meaning
17 user busy
18 no user responding
21 call rejected
22 number changed
23 user rejects all calls with calling
line id restriction (CLIR)
27 destination out of order
31 normal, unspecified
88 incompatible destination
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted.
Note: Cause Value #30 'response to STATUS ENQUIRY'
was not included in this memo since it did not apply
to a hard failure."
::= { atmSigStatEntry 10 }
atmSigDetectMsgErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Incorrect Messages detected on this
interface. The Incorrect Messages Counter reflects any
sort of incorrect information in a message. This
includes:
- RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
and STATUS messages transmitted, that contain any of
the Cause values listed below.
- Ignored messages. These messages are dropped
because the message was so damaged that it could
not be further processed. A list of dropped
messages is compiled below:
1. Message with invalid protocol discriminator
2. Message with errors in the call reference I.E.
- Bits 5-8 of the first octet not equal to
'0000'
- Bits 1-4 of the first octet indicating a
length other than 3 octets
- RELEASE COMPLETE message received with a
call reference that does not relate to a
call active or in progress
- SETUP message received with call reference
flag incorrectly set to 1
- SETUP message received with a call
reference for a call that is already
active or in progress.
3. Message too short
The following cause values are monitored by this
counter (Note: These cause values apply to both UNI3.0
and UNI3.1 unless otherwise stated):
Cause Value Meaning
10 VPCI/VCI unacceptable (UNI3.0 only)
36 VPCI/VCI assignment failure (UNI3.1 only)
81 invalid call reference value
82 identified channel does not exist
89 invalid endpoint reference
96 mandatory information element is missing
97 message type non-existent or not
implemented
99 information element non-existent or not
implemented
100 invalid information element contents
101 message not compatible with call state
104 incorrect message length
111 protocol error, unspecified
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 11 }
atmSigEmitMsgErrors OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Incorrect Messages transmitted on this
interface. The Incorrect Messages Counter reflects any
sort of incorrect information in a message. This
includes:
- RELEASE, RELEASE COMPLETE, ADD PARTY REJECT,
and STATUS messages transmitted or
received, that contain any of the Cause values
listed below.
- Ignored messages. These messages are dropped
because the message was so damaged that it could
not be further processed. A list of dropped
messages is compiled below:
1. Message with invalid protocol discriminator
2. Message with errors in the call reference I.E.
- Bits 5-8 of the first octet not equal to
'0000'
- Bits 1-4 of the first octet indicating a
length other than 3 octets
- RELEASE COMPLETE message received with a
call reference that does not relate to a
call active or in progress
- SETUP message received with call reference
flag incorrectly set to 1
- SETUP message received with a call
reference for a call that is already
active or in progress.
3. Message too short
The following cause values are monitored by this
counter (Note: These cause values apply to both UNI3.0
and UNI3.1 unless otherwise stated):
Cause Value Meaning
10 VPCI/VCI unacceptable (UNI3.0 only)
36 VPCI/VCI assignment failure (UNI3.1 only)
81 invalid call reference value
82 identified channel does not exist
89 invalid endpoint reference
96 mandatory information element is missing
97 message type non-existent or not
implemented
99 information element non-existent or not
implemented
100 invalid information element contents
101 message not compatible with call state
104 incorrect message length
111 protocol error, unspecified
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 12 }
atmSigDetectClgPtyEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Calling Party Events detected on this
interface. This counter monitors error events that
occur due to the originating user doing something
wrong. This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded by a RELEASE
mesg for the same call), ADD PARTY REJECT, or STATUS
message that contains one of the following cause code
values is received (Note: These cause values apply to
both UNI3.0 and UNI3.1):
Cause Value Meaning
28 invalid number format (address incomplete)
43 access information discarded
57 bearer capability not authorized
65 bearer capability not implemented
73 unsupported combination of traffic
parameters
78 AAL parameters cannot be supported (UNI3.1
only)
91 invalid transit network selection
93 AAL parameters cannot be supported (UNI3.0
only)
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 13 }
atmSigEmitClgPtyEvents OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Calling Party Events transmitted from this
interface. This counter monitors error events that
occur due to the originating user doing something
wrong. This counter is incremented when a RELEASE,
RELEASE COMPLETE (only when not preceded by a RELEASE
mesg for the same call), ADD PARTY REJECT, or STATUS
message that contains one of the following cause code
values is transmitted (Note: These cause values apply
to both UNI3.0 and UNI3.1):
Cause Value Meaning
28 invalid number format (address incomplete)
43 access information discarded
57 bearer capability not authorized
65 bearer capability not implemented
73 unsupported combination of traffic
parameters
78 AAL parameters cannot be supported (UNI3.1
only)
91 invalid transit network selection
93 AAL parameters cannot be supported (UNI3.0
only)
NOTE: For this counter, RELEASE COMPLETE
messages that are a reply to a previous RELEASE
message and contain the same cause value, are
redundant (for counting purposes) and should not
be counted."
::= { atmSigStatEntry 14 }
atmSigDetectTimerExpireds OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Timer Expiries detected on this interface.
The Timer Expiries Counter provides a count of network
timer expiries, and to some extent, host or switch
timer expiries. The conditions for incrementing this
counter are:
- Expiry of any network timer
- Receipt of a RELEASE or RELEASE COMPLETE
message with Cause #102, 'recovery on
timer expiry'.
NOTE: For this counter, RELEASE COMPLETE messages
that are a reply to a previous RELEASE message and
contain the same cause value, are redundant (for
counting purposes) and should not be counted."
::= { atmSigStatEntry 15 }
atmSigEmitTimerExpireds OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Timer Expiries transmitted from this
interface. The Timer Expiries Counter provides a count
of network timer expiries, and to some extent, host or
switch timer expiries. The conditions for incrementing
this counter are:
- Expiry of any network timer
- Receipt of a RELEASE or RELEASE COMPLETE
message with Cause #102, 'recovery on
timer expiry'.
NOTE: For this counter, RELEASE COMPLETE messages
that are a reply to a previous RELEASE message and
contain the same cause value, are redundant (for
counting purposes) and should not be counted."
::= { atmSigStatEntry 16 }
atmSigDetectRestarts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Restart Activity errors detected on this
interface. The Restart Activity Counter provides a
count of host, switch, or network restart activity.
This counter is incremented when receiving a RESTART
message."
::= { atmSigStatEntry 17 }
atmSigEmitRestarts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of Restart Activity errors transmitted from
this interface. The Restart Activity Counter provides
a count of host, switch, or network restart activity.
This counter is incremented when transmitting a RESTART
message."
::= { atmSigStatEntry 18 }
atmSigInEstabls OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SVC VCCs established at this signalling
entity for incoming connections."
::= { atmSigStatEntry 19 }
atmSigOutEstabls OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of SVC VCCs established at this signalling
entity for outgoing connections."
::= { atmSigStatEntry 20 }
atmSigSupportTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSigSupportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains ATM local interface configuration
parameters, one entry per ATM signalling interface."
::= { atm2MIBObjects 4 }
atmSigSupportEntry OBJECT-TYPE
SYNTAX AtmSigSupportEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This list contains signalling configuration parameters
and state variables."
INDEX { ifIndex }
::= { atmSigSupportTable 1 }
AtmSigSupportEntry ::= SEQUENCE {
atmSigSupportClgPtyNumDel INTEGER,
atmSigSupportClgPtySubAddr INTEGER,
atmSigSupportCldPtySubAddr INTEGER,
atmSigSupportHiLyrInfo INTEGER,
atmSigSupportLoLyrInfo INTEGER,
atmSigSupportBlliRepeatInd INTEGER,
atmSigSupportAALInfo INTEGER,
atmSigSupportPrefCarrier OCTET STRING
}
atmSigSupportClgPtyNumDel OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether the Calling Party Number
Information Element is transferred to the called party
address. The value of this object can be:
- enabled(1) This Information Element is transferred
to the called party
- disabled(2) This Information Element is NOT
transferred to the called party."
::= { atmSigSupportEntry 1 }
atmSigSupportClgPtySubAddr OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether to accept and transfer
the Calling Party Subaddress Information Element from
the calling party to the called party. Calling party
subaddress information shall only be transferred to the
called party if calling party number delivery is
enabled (i.e., atmSigSupportClgPtyNumDel =
'enabled(1)'. The value of this object can be:
- enabled(1) This Information Element is transferred
to the called party
- disabled(2) This Information Element is NOT
transferred to the called party."
::= { atmSigSupportEntry 2 }
atmSigSupportCldPtySubAddr OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether to accept, transfer, and
deliver the Called Party Subaddress Information Element
from the calling party to the called party. The value
of this object can be:
- enabled(1) This Information Element is transferred
to the called party
- disabled(2) This Information Element is NOT
transferred to the called party."
::= { atmSigSupportEntry 3 }
atmSigSupportHiLyrInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether to accept, transfer, and
deliver the Broadband High Layer Information Element
from the calling party to the called party. The value
of this object can be:
- enabled(1) This Information Element is transferred
to the called party
- disabled(2) This Information Element is NOT
transferred to the called party."
::= { atmSigSupportEntry 4 }
atmSigSupportLoLyrInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether to accept, transfer, and
deliver the Broadband Low Layer Information Element
from the calling party to the called party. The value
of this object can be:
- enabled(1) This Information Element is transferred
to the called party
- disabled(2) This Information Element is NOT
transferred to the called party."
::= { atmSigSupportEntry 5 }
atmSigSupportBlliRepeatInd OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether to accept, transfer, and
deliver the Broadband Repeat Indicator with two or
three instances of the Broadband Low Layer Information
Element for low layer information selection from the
calling party to the called party. This object shall
only be transferred if atmSigSupportLoLyrInfo =
'enabled(1)'. The value of this object can be:
- enabled(1) This Information Element is transferred
to the called party
- disabled(2) This Information Element is NOT
transferred to the called party."
::= { atmSigSupportEntry 6 }
atmSigSupportAALInfo OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates whether to accept, transfer, and
deliver the ATM Adaptation Layer Parameters Information
Element from the calling party to the called party.
The value of this object can be:
- enabled(1) This Information Element is transferred
to the called party
- disabled(2) This Information Element is NOT
transferred to the called party."
::= { atmSigSupportEntry 7 }
atmSigSupportPrefCarrier OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This parameter identifies the carrier to which
intercarrier calls originated from this interface are
routed when transit network selection information is
not provided by the calling party. If a Carrier
Identification Code (CIC) is used the parameter shall
contain the CIC. For three-digit CICs, the first octet
shall be '0' and the CIC is contained in the three
following octets. If the preferred carrier feature is
not supported the value is a zero-length string."
::= { atmSigSupportEntry 8 }
atmSigDescrParamTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSigDescrParamEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table contains signalling capabilities of VCLs
except the Traffic Descriptor. Traffic
descriptors are described in the
atmTrafficDescrParamTable."
REFERENCE
"ATM Forum User-Network Interface Specification,
Version 3.1, Section 5.4.5 Variable Length
Information Elements."
::= { atm2MIBObjects 5 }
atmSigDescrParamEntry OBJECT-TYPE
SYNTAX AtmSigDescrParamEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents a set of
signalling capabilities that can be applied to a
VCL. There is no requirement for unique entries,
except that the index must be unique. Objects
atmSigDescrParamRowStatus is required during
creation."
INDEX { atmSigDescrParamIndex }
::= { atmSigDescrParamTable 1 }
AtmSigDescrParamEntry ::= SEQUENCE {
atmSigDescrParamIndex AtmSigDescrParamIndex,
atmSigDescrParamAalType INTEGER,
atmSigDescrParamAalSscsType INTEGER,
atmSigDescrParamBhliType INTEGER,
atmSigDescrParamBhliInfo OCTET STRING,
atmSigDescrParamBbcConnConf INTEGER,
atmSigDescrParamBlliLayer2 INTEGER,
atmSigDescrParamBlliLayer3 INTEGER,
atmSigDescrParamBlliPktSize INTEGER,
atmSigDescrParamBlliSnapId INTEGER,
atmSigDescrParamBlliOuiPid OCTET STRING,
atmSigDescrParamRowStatus RowStatus
}
atmSigDescrParamIndex OBJECT-TYPE
SYNTAX AtmSigDescrParamIndex
-- Rsyntax INTEGER(0..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The value of this object is used by the
atmVclExtTable to identify a row in this table."
::= { atmSigDescrParamEntry 1 }
atmSigDescrParamAalType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
aal1(2),
aal34(3),
aal5(4),
userDefined(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The AAL type. The value of this object is set to
other(1) when not defined."
DEFVAL { other }
::= { atmSigDescrParamEntry 2 }
atmSigDescrParamAalSscsType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
assured(2),
nonassured(3),
frameRelay(4),
null(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SSCS type used by this entry."
DEFVAL { other }
::= { atmSigDescrParamEntry 3 }
atmSigDescrParamBhliType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
iso(2),
user(3),
hiProfile(4),
vendorSpecific(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Broadband high layer type."
DEFVAL { other }
::= { atmSigDescrParamEntry 4 }
atmSigDescrParamBhliInfo OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..7))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Broadband high layer information. When
atmSigDescrParamBhliType is set to iso(2), the
value of this object is a zero length string.
When atmSigDescrParamBhliType is set to
hiProfile(4), the value of this object is a length
of 4 octet string containing user to user profile
identifier. When atmSigDescrParamBhliType is set
to vendorSpecific(4), the value of this object
is a length of 7 octet string. The most
significant 3 octets consist of a globally-
administered OUI, the least significant 4 octets
are the vender administered application OUI."
DEFVAL { ''h }
::= { atmSigDescrParamEntry 5 }
atmSigDescrParamBbcConnConf OBJECT-TYPE
SYNTAX INTEGER {
ptp(1),
ptmp(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Broadband bearer capability user plane
connection configuration parameter."
::= { atmSigDescrParamEntry 6 }
atmSigDescrParamBlliLayer2 OBJECT-TYPE
SYNTAX INTEGER {
other(1),
iso1745(2),
q921(3),
x25linklayer(4),
x25multilink(5),
lapb(6),
hdlcArm(7),
hdlcNrm(8),
hdlcAbm(9),
iso88022(10),
x75slp(11),
q922(12),
userDef(13),
iso7776(14)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Broadband low layer information, protocol
type of layer 2. The value of this object is
other(1) if layer 2 protocol is not used."
DEFVAL { other }
::= { atmSigDescrParamEntry 7 }
atmSigDescrParamBlliLayer3 OBJECT-TYPE
SYNTAX INTEGER {
other(1),
x25pkt(2),
isoiec8208(3),
x223iso8878(4),
isoiec8473(5),
t70(6),
tr9577(7),
userDef(8)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The Broadband low layer information, protocol
type of layer 3. The value of this object is
other(1) if layer 3 protocol is not used."
DEFVAL { other }
::= { atmSigDescrParamEntry 8 }
atmSigDescrParamBlliPktSize OBJECT-TYPE
SYNTAX INTEGER {
other(1),
s16(2),
s32(3),
s64(4),
s128(5),
s256(6),
s512(7),
s1024(8),
s2048(9),
s4096(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The default packet size defined in B-LLI."
DEFVAL { other }
::= { atmSigDescrParamEntry 9 }
atmSigDescrParamBlliSnapId OBJECT-TYPE
SYNTAX INTEGER {
other(1),
true(2),
false(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The SNAP ID used for Broadband low layer protocol
layer 3. The value of this object is other(1) if
atmSigDescrParamBlliLayer3 is set to other(1)."
DEFVAL { other }
::= { atmSigDescrParamEntry 10 }
atmSigDescrParamBlliOuiPid OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..5))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The OUI/PID encoding for Broadband low layer
protocol layer 3. The value of this object is a
zero length string if atmSigDescrParamBlliLayer3
is set to none(1). When used, it is always 5
octets with the most significant octet as the OUI
Octet 1 and the least significant octet as the PID
Octet 2."
DEFVAL { ''h }
::= { atmSigDescrParamEntry 11 }
atmSigDescrParamRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and delete rows in
the atmSigDescrParamTable. Writable values are:
-'createAndWait' which allows manager to create an
entry first and fill in the parameters later.
-'active' which allows manager to set the entry to
be available to users. -'destroy' which allows
manager to delete an entry from this table.
Readable values are: -'createAndWait' which means
the entry is created but not available to be used.
-'active' means it is active and ready to be used
by agent or manager."
::= { atmSigDescrParamEntry 12 }
atmIfRegisteredAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIfRegisteredAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains a list of ATM addresses that can
be used for calls to and from a given interface by a
switch or service. The ATM addresses are either
registered by the endsystem via ILMI or statically
configured. This table does not expose PNNI
reachability information. ILMI registered addresses
cannot be deleted using this table. This table only
applies to switches and network services."
::= { atm2MIBObjects 6 }
atmIfRegisteredAddrEntry OBJECT-TYPE
SYNTAX AtmIfRegisteredAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ATM Interface Registered Address
table."
INDEX { ifIndex, atmIfRegAddrAddress }
::= { atmIfRegisteredAddrTable 1 }
AtmIfRegisteredAddrEntry ::= SEQUENCE {
atmIfRegAddrAddress AtmAddr,
atmIfRegAddrAddressSource INTEGER,
atmIfRegAddrOrgScope INTEGER,
atmIfRegAddrRowStatus RowStatus
}
atmIfRegAddrAddress OBJECT-TYPE
SYNTAX AtmAddr
-- Rsyntax OCTET STRING(SIZE(0 | 8 | 20))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An address registered for a given switch or service
interface."
::= { atmIfRegisteredAddrEntry 1 }
atmIfRegAddrAddressSource OBJECT-TYPE
SYNTAX INTEGER {
other(1),
static(2),
dynamic(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of address source for a given ATM Address.
The value dynamic(3) is indicated when ILMI is used."
::= { atmIfRegisteredAddrEntry 2 }
atmIfRegAddrOrgScope OBJECT-TYPE
SYNTAX INTEGER {
localNetwork(1),
localNetworkPlusOne(2),
localNetworkPlusTwo(3),
siteMinusOne(4),
intraSite(5),
sitePlusOne(6),
organizationMinusOne(7),
intraOrganization(8),
organizationPlusOne(9),
communityMinusOne(10),
intraCommunity(11),
communityPlusOne(12),
regional(13),
interRegional(14),
global(15)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object indicates the organizational scope for the
referenced address. The information of the referenced
address shall not be distributed outside the indicated
scope. Refer to Annex 5.3 of ATM Forum UNI Signalling
4.0 for guidelines regarding the use of organizational
scopes.
This value cannot be configured for ILMI-registered
addresses.
The default values for organizational scope are
localNetwork(1) for ATM group addresses, and global(15)
for individual addresses."
::= { atmIfRegisteredAddrEntry 3 }
atmIfRegAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create and delete rows in the
atmIfRegisteredAddrTable. Rows created dynamically
(e.g., ILMI-registered addresses) cannot be deleted
using this object."
::= { atmIfRegisteredAddrEntry 4 }
atmVclAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmVclAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a mapping between the
atmVclTable and the ATM called party/calling party
address. This table can be used to retrieve the
calling party and called party ATM address pair
for a given Vcl. Note that there can be more than
one pair of calling party and called party ATM
addresses for a VCL in a point to multi-point
call."
::= { atm2MIBObjects 7 }
atmVclAddrEntry OBJECT-TYPE
SYNTAX AtmVclAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents a binding
between a VCL and an ATM address associated with
this call. This ATM address can be either the
called party address or the calling party address.
There can be more than one pair of calling/called
party ATM addresses associated with the VCL entry
for point to multi-point calls. Objects
atmVclAddrAddr, atmVclAddrType, and
atmVclAddrRowStatus are required during row
creation."
INDEX { ifIndex, atmVclVpi, atmVclVci, atmVclAddrAddr }
::= { atmVclAddrTable 1 }
AtmVclAddrEntry ::= SEQUENCE {
atmVclAddrAddr AtmAddr,
atmVclAddrType INTEGER,
atmVclAddrRowStatus RowStatus
}
atmVclAddrAddr OBJECT-TYPE
SYNTAX AtmAddr
-- Rsyntax OCTET STRING(SIZE(0 | 8 | 20))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An ATM address on one end of the VCL. For SVCs,
the agent supplies the value of this object at
creation time. For PVCs, manager can supply the
value of this object during or after the PVC
creation."
::= { atmVclAddrEntry 1 }
atmVclAddrType OBJECT-TYPE
SYNTAX INTEGER {
callingParty(1),
calledParty(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of ATM Address represented by the object
atmVclAddrAddr. Choices are either the calling
party ATM address or the called party ATM
address."
::= { atmVclAddrEntry 2 }
atmVclAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create or destroy an entry
from this table."
::= { atmVclAddrEntry 3 }
atmAddrVclTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmAddrVclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides an alternative way to
retrieve the atmVclTable. This table can be used
to retrieve the indexing to the atmVclTable by an
ATM address."
::= { atm2MIBObjects 8 }
atmAddrVclEntry OBJECT-TYPE
SYNTAX AtmAddrVclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents an entry in
the atmVclTable of the ATM MIB [1] by it's ATM
address. The ATM address is either the calling or
called party ATM address of the call. Entries in
this table are read only. They show up when
entries are created in the atmVclAddrTable."
INDEX { atmVclAddrAddr, atmAddrVclAtmIfIndex, atmAddrVclVpi, atmAddrVclVci }
::= { atmAddrVclTable 1 }
AtmAddrVclEntry ::= SEQUENCE {
atmAddrVclAtmIfIndex InterfaceIndex,
atmAddrVclVpi AtmVpIdentifier,
atmAddrVclVci AtmVcIdentifier,
atmAddrVclAddrType INTEGER
}
atmAddrVclAtmIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
-- Rsyntax Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The interface index of the ATM interface where
this VCL pertains to. This object combined with
the atmAddrVclVpi and atmAddrVclVci objects serves
as an index to the atmVclTable."
::= { atmAddrVclEntry 1 }
atmAddrVclVpi OBJECT-TYPE
SYNTAX AtmVpIdentifier
-- Rsyntax INTEGER(0..4095)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The VPI value of the VCL. This object combined
with the atmAddrVclAtmIfIndex and atmAddrVclVci
objects serves as an index to the atmVclTable."
::= { atmAddrVclEntry 2 }
atmAddrVclVci OBJECT-TYPE
SYNTAX AtmVcIdentifier
-- Rsyntax INTEGER(0..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The VCI value of the VCL. This object combined
with the atmAddrVclAtmIfIndex and atmAddrVclVpi
objects serves as an index to the atmVclTable."
::= { atmAddrVclEntry 3 }
atmAddrVclAddrType OBJECT-TYPE
SYNTAX INTEGER {
callingParty(1),
calledParty(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of ATM Address represented by the object
atmVclAddrAddr. Choices are either calling party
address or called party address."
::= { atmAddrVclEntry 4 }
atmVplStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmVplStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains all statistic counters per
VPL. It is used to monitor the usage of the VPL
in terms of incoming cells and outgoing cells."
::= { atm2MIBObjects 9 }
atmVplStatEntry OBJECT-TYPE
SYNTAX AtmVplStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents a VPL."
INDEX { ifIndex, atmVplVpi }
::= { atmVplStatTable 1 }
AtmVplStatEntry ::= SEQUENCE {
atmVplStatTotalCellIns Counter32,
atmVplStatClp0CellIns Counter32,
atmVplStatTotalDiscards Counter32,
atmVplStatClp0Discards Counter32,
atmVplStatTotalCellOuts Counter32,
atmVplStatClp0CellOuts Counter32,
atmVplStatTaggedOuts Counter32
}
atmVplStatTotalCellIns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells received by
this VPL including both CLP=0 and CLP=1 cells.
The cells are counted prior to the application of
the traffic policing."
::= { atmVplStatEntry 1 }
atmVplStatClp0CellIns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of valid ATM cells received by this
VPL with CLP=0. The cells are counted prior to
the application of the traffic policing."
::= { atmVplStatEntry 2 }
atmVplStatTotalDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells
orginally received with CLP=0 and CLP=1."
::= { atmVplStatEntry 3 }
atmVplStatClp0Discards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing
entity."
::= { atmVplStatEntry 4 }
atmVplStatTotalCellOuts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells transmitted
by this VPL. This includes both CLP=0 and CLP=1
cells."
::= { atmVplStatEntry 5 }
atmVplStatClp0CellOuts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells transmitted
with CLP=0 by this VPL."
::= { atmVplStatEntry 6 }
atmVplStatTaggedOuts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and
transmitted by this VPL."
::= { atmVplStatEntry 7 }
atmVplLogicalPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmVplLogicalPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Indicates whether the VPL is an ATM Logical Port
interface (ifType=80)."
::= { atm2MIBObjects 10 }
atmVplLogicalPortEntry OBJECT-TYPE
SYNTAX AtmVplLogicalPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry with information about the ATM Logical
Port interface."
INDEX { ifIndex, atmVplVpi }
-- Augments atmVplEntry FROM ATM-MIB
::= { atmVplLogicalPortTable 1 }
AtmVplLogicalPortEntry ::= SEQUENCE {
atmVplLogicalPortDef INTEGER,
atmVplLogicalPortIndex InterfaceIndex
}
atmVplLogicalPortDef OBJECT-TYPE
SYNTAX INTEGER {
notLogicalIf(1),
isLogicalIf(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates whether the VPC at this VPL interface
is an ATM Logical Port interface."
DEFVAL { notLogicalIf }
::= { atmVplLogicalPortEntry 1 }
atmVplLogicalPortIndex OBJECT-TYPE
SYNTAX InterfaceIndex
-- Rsyntax Integer32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifTable index of the ATM logical port
interface associated with this VPL. Only valid if
the value of atmVplLogicalPortDef is isLogicalIf,
and the VPL row is active."
::= { atmVplLogicalPortEntry 2 }
atmVclStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmVclStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains all statistic counters per
VCL. It is used to monitor the usage of the VCL
in terms of incoming cells and outgoing cells."
::= { atm2MIBObjects 11 }
atmVclStatEntry OBJECT-TYPE
SYNTAX AtmVclStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents a VCL."
INDEX { ifIndex, atmVclVpi, atmVclVci }
::= { atmVclStatTable 1 }
AtmVclStatEntry ::= SEQUENCE {
atmVclStatTotalCellIns Counter32,
atmVclStatClp0CellIns Counter32,
atmVclStatTotalDiscards Counter32,
atmVclStatClp0Discards Counter32,
atmVclStatTotalCellOuts Counter32,
atmVclStatClp0CellOuts Counter32,
atmVclStatTaggedOuts Counter32
}
atmVclStatTotalCellIns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells received by
this VCL including both CLP=0 and CLP=1 cells.
The cells are counted prior to the application of
the traffic policing."
::= { atmVclStatEntry 1 }
atmVclStatClp0CellIns OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of valid ATM cells received by this
VCL with CLP=0. The cells are counted prior to
the application of the traffic policing."
::= { atmVclStatEntry 2 }
atmVclStatTotalDiscards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells discarded by
the traffic policing entity. This includes cells
orginally received with CLP=0 and CLP=1."
::= { atmVclStatEntry 3 }
atmVclStatClp0Discards OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells received with
CLP=0 an discarded by the traffic policing
entity."
::= { atmVclStatEntry 4 }
atmVclStatTotalCellOuts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells transmitted
by this VCL. This includes both CLP=0 and CLP=1
cells."
::= { atmVclStatEntry 5 }
atmVclStatClp0CellOuts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells transmitted
with CLP=0 by this VCL."
::= { atmVclStatEntry 6 }
atmVclStatTaggedOuts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of valid ATM cells tagged by the
traffic policing entity from CLP=0 to CLP=1 and
transmitted by this VCL."
::= { atmVclStatEntry 7 }
atmAal5VclStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmAal5VclStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table provides a collection of objects
providing AAL5 configuration and performance
statistics of a VCL."
::= { atm2MIBObjects 12 }
atmAal5VclStatEntry OBJECT-TYPE
SYNTAX AtmAal5VclStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents a VCL."
INDEX { ifIndex, atmVclVpi, atmVclVci }
::= { atmAal5VclStatTable 1 }
AtmAal5VclStatEntry ::= SEQUENCE {
atmAal5VclInPkts Counter32,
atmAal5VclOutPkts Counter32,
atmAal5VclInOctets Counter32,
atmAal5VclOutOctets Counter32
}
atmAal5VclInPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of AAL5 CPCS PDUs received on the AAL5
VCC at the interface identified by the ifIndex."
::= { atmAal5VclStatEntry 1 }
atmAal5VclOutPkts OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of AAL5 CPCS PDUs transmitted on the
AAL5 VCC at the interface identified by the
ifIndex."
::= { atmAal5VclStatEntry 2 }
atmAal5VclInOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets contained in AAL5 CPCS PDUs
received on the AAL5 VCC at the interface
identified by the ifIndex."
::= { atmAal5VclStatEntry 3 }
atmAal5VclOutOctets OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of octets contained in AAL5 CPCS PDUs
transmitted on the AAL5 VCC at the interface
identified by the ifIndex."
::= { atmAal5VclStatEntry 4 }
atmVclGenTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmVclGenEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"General Information for each VC."
::= { atm2MIBObjects 13 }
atmVclGenEntry OBJECT-TYPE
SYNTAX AtmVclGenEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry with general information
about the ATM VC."
INDEX { ifIndex, atmVclVpi, atmVclVci }
-- Augments atmVclEntry FROM ATM-MIB
::= { atmVclGenTable 1 }
AtmVclGenEntry ::= SEQUENCE {
atmVclGenSigDescrIndex AtmSigDescrParamIndex
}
atmVclGenSigDescrIndex OBJECT-TYPE
SYNTAX AtmSigDescrParamIndex
-- Rsyntax INTEGER(0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object identifies the
row in the ATM Signalling Descriptor
Parameter Table which applies to this
VCL."
::= { atmVclGenEntry 1 }
atmInterfaceExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmInterfaceExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains ATM interface
configuration and monitoring information not
defined in the atmInterfaceConfTable from the
ATM-MIB [1]. This includes the type of
connection setup procedures, ILMI information,
and information on the VPI/VCI range."
::= { atm2MIBObjects 14 }
atmInterfaceExtEntry OBJECT-TYPE
SYNTAX AtmInterfaceExtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry extends the
atmInterfaceConfEntry defined in [1]. Each
entry corresponds to an ATM
interface."
INDEX { ifIndex }
-- Augments atmInterfaceConfEntry FROM ATM-MIB
::= { atmInterfaceExtTable 1 }
AtmInterfaceExtEntry ::= SEQUENCE {
atmIntfConfigType AtmInterfaceType,
atmIntfActualType AtmInterfaceType,
atmIntfConfigSide INTEGER,
atmIntfActualSide INTEGER,
atmIntfIlmiFsmState INTEGER,
atmIntfIlmiEstablishConPollIntvl Integer32,
atmIntfIlmiCheckConPollIntvl Integer32,
atmIntfIlmiConPollInactFactor Integer32,
atmIntfIlmiPublicPrivateIndctr INTEGER,
atmInterfaceConfMaxSvpcVpi INTEGER,
atmInterfaceCurrentMaxSvpcVpi INTEGER,
atmInterfaceConfMaxSvccVpi INTEGER,
atmInterfaceCurrentMaxSvccVpi INTEGER,
atmInterfaceConfMinSvccVci INTEGER,
atmInterfaceCurrentMinSvccVci INTEGER,
atmIntfSigVccRxTrafficDescrIndex AtmTrafficDescrParamIndex,
atmIntfSigVccTxTrafficDescrIndex AtmTrafficDescrParamIndex,
atmIntfPvcFailures Counter32,
atmIntfCurrentlyFailingPVpls Gauge32,
atmIntfCurrentlyFailingPVcls Gauge32,
atmIntfPvcFailuresTrapEnable TruthValue,
atmIntfPvcNotificationInterval INTEGER
}
atmIntfConfigType OBJECT-TYPE
SYNTAX AtmInterfaceType
-- Rsyntax INTEGER {
-- other(1),
-- autoConfig(2),
-- ituDss2(3),
-- atmfUni3Dot0(4),
-- atmfUni3Dot1(5),
-- atmfUni4Dot0(6),
-- atmfIispUni3Dot0(7),
-- atmfIispUni3Dot1(8),
-- atmfIispUni4Dot0(9),
-- atmfPnni1Dot0(10),
-- atmfBici2Dot0(11),
-- atmfUniPvcOnly(12),
-- atmfNniPvcOnly(13)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The type of connection setup procedures
configured for the ATM interface. Setting this
variable to a value of 'other' is not allowed."
DEFVAL { autoConfig }
::= { atmInterfaceExtEntry 1 }
atmIntfActualType OBJECT-TYPE
SYNTAX AtmInterfaceType
-- Rsyntax INTEGER {
-- other(1),
-- autoConfig(2),
-- ituDss2(3),
-- atmfUni3Dot0(4),
-- atmfUni3Dot1(5),
-- atmfUni4Dot0(6),
-- atmfIispUni3Dot0(7),
-- atmfIispUni3Dot1(8),
-- atmfIispUni4Dot0(9),
-- atmfPnni1Dot0(10),
-- atmfBici2Dot0(11),
-- atmfUniPvcOnly(12),
-- atmfNniPvcOnly(13)
-- }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of connection setup procedures
currently being used on the interface. This may
reflect a manually configured value for the
interface type, or may be determined by other
means such as auto-configuration. A value of
`autoConfig' indicates that auto-configuration
was requested but has not yet been completed."
::= { atmInterfaceExtEntry 2 }
atmIntfConfigSide OBJECT-TYPE
SYNTAX INTEGER {
other(1),
user(2),
network(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The configured role of the managed entity as one
side of the ATM interface. This value does not
apply when the object atmIntfConfigType is set to
`autoConfig', `atmfPnni1Dot0', or
`atmfBici2Dot0'."
::= { atmInterfaceExtEntry 3 }
atmIntfActualSide OBJECT-TYPE
SYNTAX INTEGER {
other(1),
user(2),
network(3),
symmetric(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current role used by the managed entity to
represent one side of the ATM interface."
::= { atmInterfaceExtEntry 4 }
atmIntfIlmiFsmState OBJECT-TYPE
SYNTAX INTEGER {
stopped(1),
linkFailing(2),
establishing(3),
configuring(4),
retrievingNetworkPrefixes(5),
registeringNetworkPrefixes(6),
retrievingAddresses(7),
registeringAddresses(8),
verifying(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates the state of the ILMI Finite State Machine
associated with this interface."
REFERENCE
"ATM Forum ILMI 4.0 Specification, Appendix 1"
::= { atmInterfaceExtEntry 7 }
atmIntfIlmiEstablishConPollIntvl OBJECT-TYPE
SYNTAX Integer32
-- SYNTAX Integer32(1..65535)
-- Units
-- seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time S between successive transmissions
of ILMI messages on this interface for the purpose of
detecting establishment of ILMI connectivity."
REFERENCE
"ATM Forum ILMI 4.0 Section 8.3.1"
DEFVAL { 1 }
::= { atmInterfaceExtEntry 8 }
atmIntfIlmiCheckConPollIntvl OBJECT-TYPE
SYNTAX Integer32
-- SYNTAX Integer32(0..65535)
-- Units
-- seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The amount of time T between successive transmissions
of ILMI messages on this interface for the purpose of
detecting loss of ILMI connectivity. The distinguished
value zero disables ILMI connectivity procedures on
this interface."
REFERENCE
"ATM Forum ILMI 4.0 Section 8.3.1"
DEFVAL { 5 }
::= { atmInterfaceExtEntry 9 }
atmIntfIlmiConPollInactFactor OBJECT-TYPE
SYNTAX Integer32
-- SYNTAX Integer32(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number K of consecutive polls on this interface
for which no ILMI response message is received before
ILMI connectivity is declared lost."
REFERENCE
"ATM Forum ILMI 4.0 Section 8.3.1"
DEFVAL { 4 }
::= { atmInterfaceExtEntry 10 }
atmIntfIlmiPublicPrivateIndctr OBJECT-TYPE
SYNTAX INTEGER {
other(1),
public(2),
private(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Specifies whether this end of the interface is
advertised in ILMI as a device of the `public' or
`private' type."
DEFVAL { private }
::= { atmInterfaceExtEntry 11 }
atmInterfaceConfMaxSvpcVpi OBJECT-TYPE
SYNTAX INTEGER(0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum VPI that the signalling stack on the ATM
interface is configured to support for allocation to
switched virtual path connections."
::= { atmInterfaceExtEntry 12 }
atmInterfaceCurrentMaxSvpcVpi OBJECT-TYPE
SYNTAX INTEGER(0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum VPI that the signalling stack on the ATM
interface may currently allocate to switched virtual
path connections. This value is the minimum of
atmInterfaceConfMaxSvpcVpi, and the
atmInterfaceMaxSvpcVpi of the interface's UNI/NNI peer.
If the interface does not negotiate with its peer to
determine the maximum VPI that can be allocated to
SVPCs on the interface, then the value of this object
must equal atmInterfaceConfMaxSvpcVpi. "
::= { atmInterfaceExtEntry 13 }
atmInterfaceConfMaxSvccVpi OBJECT-TYPE
SYNTAX INTEGER(0..4095)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The maximum VPI that the signalling stack on the ATM
interface is configured to support for allocation to
switched virtual channel connections."
::= { atmInterfaceExtEntry 14 }
atmInterfaceCurrentMaxSvccVpi OBJECT-TYPE
SYNTAX INTEGER(0..4095)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum VPI that the signalling stack on the ATM
interface may currently allocate to switched virtual
channel connections. This value is the minimum of
atmInterfaceConfMaxSvccVpi, and the
atmInterfaceConfMaxSvccVpi of the interface's UNI/NNI
peer.
If the interface does not negotiate with its peer to
determine the maximum VPI that can be allocated to
SVCCs on the interface, then the value of this object
must equal atmInterfaceConfMaxSvccVpi."
::= { atmInterfaceExtEntry 15 }
atmInterfaceConfMinSvccVci OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum VCI that the signalling stack on the ATM
interface is configured to support for allocation to
switched virtual channel connections."
::= { atmInterfaceExtEntry 16 }
atmInterfaceCurrentMinSvccVci OBJECT-TYPE
SYNTAX INTEGER(0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The minimum VCI that the signalling stack on the ATM
interface may currently allocate to switched virtual
channel connections. This value is the maximum of
atmInterfaceConfMinSvccVci, and the
atmInterfaceConfMinSvccVci of the interface's UNI/NNI
peer.
If the interface does not negotiate with its peer to
determine the minimum VCI that can be allocated to
SVCCs on the interface, then the value of this object
must equal atmInterfaceConfMinSvccVci."
::= { atmInterfaceExtEntry 17 }
atmIntfSigVccRxTrafficDescrIndex OBJECT-TYPE
SYNTAX AtmTrafficDescrParamIndex
-- Rsyntax INTEGER(0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the row in the
atmTrafficDescrParamTable used during ILMI
auto-configuration to specify the advertised
signalling VCC traffic parameters for the
receive direction.
The traffic descriptor resulting from ILMI auto-
configuration of the signalling VCC is indicated
in the atmVclTable."
::= { atmInterfaceExtEntry 18 }
atmIntfSigVccTxTrafficDescrIndex OBJECT-TYPE
SYNTAX AtmTrafficDescrParamIndex
-- Rsyntax INTEGER(0..2147483647)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the row in the
atmTrafficDescrParamTable used during ILMI
auto-configuration to specify the advertised
signalling VCC traffic parameters for the
transmit direction.
The traffic descriptor resulting from ILMI auto-
configuration of the signalling VCC is indicated
in the atmVclTable."
::= { atmInterfaceExtEntry 19 }
atmIntfPvcFailures OBJECT-TYPE
SYNTAX Counter32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times the operational status of a PVPL
or PVCL on this interface has gone down."
::= { atmInterfaceExtEntry 20 }
atmIntfCurrentlyFailingPVpls OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of VPLs on this interface for which
there is an active row in the atmVplTable having an
atmVplConnKind value of `pvc' and an atmVplOperStatus
with a value other than `up'."
::= { atmInterfaceExtEntry 21 }
atmIntfCurrentlyFailingPVcls OBJECT-TYPE
SYNTAX Gauge32
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current number of VCLs on this interface for which
there is an active row in the atmVclTable having an
atmVclConnKind value of `pvc' and an atmVclOperStatus
with a value other than `up'."
::= { atmInterfaceExtEntry 22 }
atmIntfPvcFailuresTrapEnable OBJECT-TYPE
SYNTAX TruthValue
-- Rsyntax INTEGER {
-- true(1),
-- false(2)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Allows the generation of traps in response to PVCL or
PVPL failures on this interface."
DEFVAL { false }
::= { atmInterfaceExtEntry 23 }
atmIntfPvcNotificationInterval OBJECT-TYPE
SYNTAX INTEGER(1..3600)
-- Units
-- seconds
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The minimum interval between the sending of
atmIntfPvcFailuresTrap notifications for this
interface."
DEFVAL { 30 }
::= { atmInterfaceExtEntry 24 }
atmIlmiSrvcRegTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIlmiSrvcRegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains a list of all the ATM network
services known by this device.
The characteristics of these services are made
available through the ILMI, using the ILMI general-
purpose service registry MIB.
These services may be made available to all ATM
interfaces (atmIlmiSrvcRegIndex = 0) or to some
specific ATM interfaces only (atmIlmiSrvcRegIndex = ATM
interface index)."
::= { atm2MIBObjects 15 }
atmIlmiSrvcRegEntry OBJECT-TYPE
SYNTAX AtmIlmiSrvcRegEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single service provider that is
available to the user-side of an adjacent device
through the ILMI."
INDEX { atmIlmiSrvcRegIndex, atmIlmiSrvcRegServiceID, atmIlmiSrvcRegAddressIndex }
::= { atmIlmiSrvcRegTable 1 }
AtmIlmiSrvcRegEntry ::= SEQUENCE {
atmIlmiSrvcRegIndex InterfaceIndex,
atmIlmiSrvcRegServiceID OBJECT IDENTIFIER,
atmIlmiSrvcRegAddressIndex INTEGER,
atmIlmiSrvcRegATMAddress AtmAddr,
atmIlmiSrvcRegParm1 OCTET STRING,
atmIlmiSrvcRegRowStatus RowStatus
}
atmIlmiSrvcRegIndex OBJECT-TYPE
SYNTAX InterfaceIndex
-- Rsyntax Integer32
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ATM interface where the service defined in this
entry can be made available to an ATM device attached
to this interface.
The value of 0 has a special meaning: when an ATM
service is defined in an entry whose
atmIlmiSrvcRegIndex is zero, the ATM service is
available to ATM devices connected to any ATM
interface. (default value(s)).
When the user-side of an adjacent device queries the
content of the ILMI service registry MIB (using the
ILMI protocol), the local network-side responds with
the ATM services defined in atmIlmiSrvcRegTable
entries, provided that these entries are indexed by:
- the corresponding interface number (atmIlmiSrvcRegIndex equal
to the number of the interface that the adjacent device is
connected to)
- zero (atmIlmiSrvcRegIndex=0)."
::= { atmIlmiSrvcRegEntry 1 }
atmIlmiSrvcRegServiceID OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This is the service identifier which uniquely
identifies the type of service at the address provided
in the table. The object identifiers for the LAN
Emulation Configuration Server (LECS) and the ATM Name
Server (ANS) are defined in the ATM Forum ILMI Service
Registry MIB."
::= { atmIlmiSrvcRegEntry 2 }
atmIlmiSrvcRegAddressIndex OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An arbitrary integer to differentiate multiple rows
containing different ATM addresses for the same service
on the same interface. This number needs NOT to be the
same as the corresponding ILMI atmfSrvcRegAddressIndex
MIB object."
::= { atmIlmiSrvcRegEntry 3 }
atmIlmiSrvcRegATMAddress OBJECT-TYPE
SYNTAX AtmAddr
-- Rsyntax OCTET STRING(SIZE(0 | 8 | 20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is the full address of the service. The user-side of the
adjacent device may use this address to establish a connection
with the service."
::= { atmIlmiSrvcRegEntry 4 }
atmIlmiSrvcRegParm1 OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(1..255))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An octet string used according to the value of
atmIlmiSrvcRegServiceID."
::= { atmIlmiSrvcRegEntry 5 }
atmIlmiSrvcRegRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object is used to create or destroy an entry from
this table."
::= { atmIlmiSrvcRegEntry 6 }
atmIlmiNetworkPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmIlmiNetworkPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table specifying per interface network prefix(es)
supplied by the network side of the UNI during ILMI
address registration. When no network prefixes are
specified for a particular interface, one or more
network prefixes based on the switch address(es) may be
used for ILMI address registration."
::= { atm2MIBObjects 16 }
atmIlmiNetworkPrefixEntry OBJECT-TYPE
SYNTAX AtmIlmiNetworkPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single network prefix supplied by
the network side of the UNI during ILMI address
registration. Note that the index variable
atmIlmiNetPrefixPrefix is a variable-length string, and
as such the rule for variable-length strings in section
7.7 of RFC 1902 applies."
INDEX { ifIndex, atmIlmiNetPrefixPrefix }
::= { atmIlmiNetworkPrefixTable 1 }
AtmIlmiNetworkPrefixEntry ::= SEQUENCE {
atmIlmiNetPrefixPrefix AtmIlmiNetworkPrefix,
atmIlmiNetPrefixRowStatus RowStatus
}
atmIlmiNetPrefixPrefix OBJECT-TYPE
SYNTAX AtmIlmiNetworkPrefix
-- Rsyntax OCTET STRING(SIZE(8 | 13))
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The network prefix specified for use in ILMI address
registration."
::= { atmIlmiNetworkPrefixEntry 1 }
atmIlmiNetPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to create, delete, activate and de-activate
network prefixes used in ILMI address registration."
::= { atmIlmiNetworkPrefixEntry 2 }
atmSwitchAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmSwitchAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains one or more ATM endsystem
addresses on a per switch basis. These addresses are
used to identify the switch. When no ILMI network
prefixes are configured for certain interfaces, network
prefixes based on the switch address(es) may be used
for ILMI address registration."
::= { atm2MIBObjects 17 }
atmSwitchAddressEntry OBJECT-TYPE
SYNTAX AtmSwitchAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the ATM Switch Address table."
INDEX { atmSwitchAddressIndex }
::= { atmSwitchAddressTable 1 }
AtmSwitchAddressEntry ::= SEQUENCE {
atmSwitchAddressIndex Integer32,
atmSwitchAddressAddress OCTET STRING,
atmSwitchAddressRowStatus RowStatus
}
atmSwitchAddressIndex OBJECT-TYPE
SYNTAX Integer32
-- SYNTAX Integer32(1..65535)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An arbitrary index used to enumerate the ATM endsystem
addresses for this switch."
::= { atmSwitchAddressEntry 1 }
atmSwitchAddressAddress OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(13 .. 20))
-- SYNTAX OCTET STRING(SIZE(13 | 20))
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An ATM endsystem address or address prefix used to
identify this switch. When no ESI or SEL field is
specified, the switch may generate the ESI and SEL
fields automatically to obtain a complete 20-byte ATM
endsystem address."
::= { atmSwitchAddressEntry 2 }
atmSwitchAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
-- Rsyntax INTEGER {
-- active(1),
-- notInService(2),
-- notReady(3),
-- createAndGo(4),
-- createAndWait(5),
-- destroy(6)
-- }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Used to create, delete, activate, and de-
activate
addresses used to identify this switch."
::= { atmSwitchAddressEntry 3 }
atmVpCrossConnectXTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmVpCrossConnectXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains one row per VP Cross Connect
represented in the atmVpCrossConnectTable."
::= { atm2MIBObjects 18 }
atmVpCrossConnectXEntry OBJECT-TYPE
SYNTAX AtmVpCrossConnectXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular ATM VP Cross Connect.
Each entry provides an two objects that name the Cross
Connect. One is assigned by the Service User and the
other by the Service Provider."
INDEX { atmVpCrossConnectIndex, atmVpCrossConnectLowIfIndex, atmVpCrossConnectLowVpi, atmVpCrossConnectHighIfIndex, atmVpCrossConnectHighVpi }
-- Augments atmVpCrossConnectEntry FROM ATM-MIB
::= { atmVpCrossConnectXTable 1 }
AtmVpCrossConnectXEntry ::= SEQUENCE {
atmVpCrossConnectUserName DisplayString,
atmVpCrossConnectProviderName DisplayString
}
atmVpCrossConnectUserName OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a service user assigned textual representation
of a VPC PVC."
::= { atmVpCrossConnectXEntry 1 }
atmVpCrossConnectProviderName OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a system supplied textual representation of
VPC PVC. It is assigned by the service provider."
::= { atmVpCrossConnectXEntry 2 }
atmVcCrossConnectXTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmVcCrossConnectXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains one row per VC Cross Connect
represented in the atmVcCrossConnectTable."
::= { atm2MIBObjects 19 }
atmVcCrossConnectXEntry OBJECT-TYPE
SYNTAX AtmVcCrossConnectXEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a particular ATM VC Cross Connect.
Each entry provides an two objects that name the Cross
Connect. One is assigned by the Service User and the
other by the Service Provider."
INDEX { atmVcCrossConnectIndex, atmVcCrossConnectLowIfIndex, atmVcCrossConnectLowVpi, atmVcCrossConnectLowVci, atmVcCrossConnectHighIfIndex, atmVcCrossConnectHighVpi, atmVcCrossConnectHighVci }
-- Augments atmVcCrossConnectEntry FROM ATM-MIB
::= { atmVcCrossConnectXTable 1 }
AtmVcCrossConnectXEntry ::= SEQUENCE {
atmVcCrossConnectUserName DisplayString,
atmVcCrossConnectProviderName DisplayString
}
atmVcCrossConnectUserName OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This is a service user assigned textual representation
of a VCC PVC."
::= { atmVcCrossConnectXEntry 1 }
atmVcCrossConnectProviderName OBJECT-TYPE
SYNTAX DisplayString
-- Rsyntax OCTET STRING(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is a system supplied textual representation of
VCC PVC. It is assigned by the service provider."
::= { atmVcCrossConnectXEntry 2 }
atmCurrentlyFailingPVplTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmCurrentlyFailingPVplEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table indicating all VPLs for which there is an
active row in the atmVplTable having an atmVplConnKind
value of `pvc' and an atmVplOperStatus with a value
other than `up'."
::= { atm2MIBObjects 20 }
atmCurrentlyFailingPVplEntry OBJECT-TYPE
SYNTAX AtmCurrentlyFailingPVplEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents a VPL for which
the atmVplRowStatus is `active', the atmVplConnKind is
`pvc', and the atmVplOperStatus is other than `up'."
INDEX { ifIndex, atmVplVpi }
::= { atmCurrentlyFailingPVplTable 1 }
AtmCurrentlyFailingPVplEntry ::= SEQUENCE {
atmCurrentlyFailingPVplTimeStamp TimeStamp
}
atmCurrentlyFailingPVplTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
-- Rsyntax TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time at which this PVPL began to fail."
::= { atmCurrentlyFailingPVplEntry 1 }
atmCurrentlyFailingPVclTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmCurrentlyFailingPVclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table indicating all VCLs for which there is an
active row in the atmVclTable having an atmVclConnKind
value of `pvc' and an atmVclOperStatus with a value
other than `up'."
::= { atm2MIBObjects 21 }
atmCurrentlyFailingPVclEntry OBJECT-TYPE
SYNTAX AtmCurrentlyFailingPVclEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Each entry in this table represents a VCL for which
the atmVclRowStatus is `active', the atmVclConnKind is
`pvc', and the atmVclOperStatus is other than `up'."
INDEX { ifIndex, atmVclVpi, atmVclVci }
::= { atmCurrentlyFailingPVclTable 1 }
AtmCurrentlyFailingPVclEntry ::= SEQUENCE {
atmCurrentlyFailingPVclTimeStamp TimeStamp
}
atmCurrentlyFailingPVclTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
-- Rsyntax TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The time at which this PVCL began to fail."
::= { atmCurrentlyFailingPVclEntry 1 }
atmIntfPvcFailuresTrap TRAP-TYPE
-- Reverse mappable trap
ENTERPRISE atmPvcTraps
VARIABLES {
ifIndex, atmIntfPvcFailures, atmIntfCurrentlyFailingPVpls,
atmIntfCurrentlyFailingPVcls }
-- Status
-- mandatory
DESCRIPTION
"A notification indicating that one or more PVPLs or
PVCLs on this interface has failed since the last
atmPvcFailuresTrap was sent. If this trap has not been
sent for the last atmIntfPvcNotificationInterval, then
it will be sent on the next increment of
atmIntfPvcFailures."
::= 1
atmSwitchServcHostGroup OBJECT IDENTIFIER ::= { atm2MIBGroups 1 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- A collection of objects providing information
-- for a Switch/Service/Host that implements
-- ATM interfaces.
-- objects
-- atmSigSSCOPConEvents, atmSigSSCOPErrdPdus,
-- atmSigDetectSetupAttempts, atmSigEmitSetupAttempts,
-- atmSigDetectUnavailRoutes, atmSigEmitUnavailRoutes,
-- atmSigDetectUnavailResrcs, atmSigEmitUnavailResrcs,
-- atmSigDetectCldPtyEvents, atmSigEmitCldPtyEvents,
-- atmSigDetectMsgErrors, atmSigEmitMsgErrors,
-- atmSigDetectClgPtyEvents, atmSigEmitClgPtyEvents,
-- atmSigDetectTimerExpireds, atmSigEmitTimerExpireds,
-- atmSigDetectRestarts, atmSigEmitRestarts, atmSigInEstabls,
-- atmSigOutEstabls, atmVclStatTotalCellIns,
-- atmVclStatClp0CellIns, atmVclStatTotalDiscards,
-- atmVclStatClp0Discards, atmVclStatTotalCellOuts,
-- atmVclStatClp0CellOuts, atmVclStatTaggedOuts,
-- atmVplStatTotalCellIns, atmVplStatClp0CellIns,
-- atmVplStatTotalDiscards, atmVplStatClp0Discards,
-- atmVplStatTotalCellOuts, atmVplStatClp0CellOuts,
-- atmVplStatTaggedOuts, atmVplLogicalPortDef,
-- atmVplLogicalPortIndex, atmInterfaceConfMaxSvpcVpi,
-- atmInterfaceCurrentMaxSvpcVpi, atmInterfaceConfMaxSvccVpi,
-- atmInterfaceCurrentMaxSvccVpi, atmInterfaceConfMinSvccVci,
-- atmInterfaceCurrentMinSvccVci,
-- atmIntfSigVccRxTrafficDescrIndex,
-- atmIntfSigVccTxTrafficDescrIndex, atmIntfPvcFailures,
-- atmIntfCurrentlyFailingPVpls, atmIntfCurrentlyFailingPVcls,
-- atmIntfPvcNotificationInterval, atmIntfPvcFailuresTrapEnable,
-- atmIntfConfigType, atmIntfActualType, atmIntfConfigSide,
-- atmIntfActualSide, atmIntfIlmiFsmState,
-- atmIntfIlmiEstablishConPollIntvl,
-- atmIntfIlmiCheckConPollIntvl, atmIntfIlmiConPollInactFactor,
-- atmIntfIlmiPublicPrivateIndctr
atmSwitchServcGroup OBJECT IDENTIFIER ::= { atm2MIBGroups 2 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- A collection of objects providing information
-- for a Switch/Service that implements ATM interfaces.
-- objects
-- atmIlmiSrvcRegATMAddress, atmIlmiSrvcRegParm1,
-- atmIlmiSrvcRegRowStatus, atmIlmiNetPrefixRowStatus,
-- atmSigSupportClgPtyNumDel, atmSigSupportClgPtySubAddr,
-- atmSigSupportCldPtySubAddr, atmSigSupportHiLyrInfo,
-- atmSigSupportLoLyrInfo, atmSigSupportBlliRepeatInd,
-- atmSigSupportAALInfo, atmSigSupportPrefCarrier,
-- atmSvcVpCrossConnectCreationTime,
-- atmSvcVpCrossConnectRowStatus,
-- atmSvcVcCrossConnectCreationTime,
-- atmSvcVcCrossConnectRowStatus, atmIfRegAddrAddressSource,
-- atmIfRegAddrOrgScope, atmIfRegAddrRowStatus
atmServcGroup OBJECT IDENTIFIER ::= { atm2MIBGroups 4 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- A collection of objects providing information
-- for an ATM Network Service.
-- objects
-- atmVpCrossConnectUserName, atmVpCrossConnectProviderName,
-- atmVcCrossConnectUserName, atmVcCrossConnectProviderName
atmHostGroup OBJECT IDENTIFIER ::= { atm2MIBGroups 5 }
-- OBJECT-GROUP
-- Status
-- mandatory
-- Descr
-- A collection of objects providing information
-- for a Host that implements ATM interfaces.
-- objects
-- atmAal5VclInPkts, atmAal5VclOutPkts, atmAal5VclInOctets,
-- atmAal5VclOutOctets, atmVclAddrType, atmVclAddrRowStatus,
-- atmAddrVclAddrType, atmVclGenSigDescrIndex,
-- atmSigDescrParamAalType, atmSigDescrParamAalSscsType,
-- atmSigDescrParamBhliType, atmSigDescrParamBhliInfo,
-- atmSigDescrParamBbcConnConf, atmSigDescrParamBlliLayer2,
-- atmSigDescrParamBlliLayer3, atmSigDescrParamBlliPktSize,
-- atmSigDescrParamBlliSnapId, atmSigDescrParamBlliOuiPid,
-- atmSigDescrParamRowStatus
atm2MIBCompliance OBJECT IDENTIFIER ::= { atm2MIBCompliances 1 }
-- MODULE-COMPLIANCE
-- Status
-- mandatory
-- Descr
-- The compliance statement for SNMP entities which
-- represent ATM interfaces. The compliance statements
-- are used to determine if a particular group or object
-- applies to hosts, networks/switches, or both.
-- Module
-- >>current<<
-- MandGroup
-- atmSwitchServcHostGroup
-- ObjVar
-- atmVclStatTotalCellIns
-- ObjVar
-- atmVclStatClp0CellIns
-- ObjVar
-- atmVclStatTotalDiscards
-- ObjVar
-- atmVclStatClp0Discards
-- ObjVar
-- atmVclStatTotalCellOuts
-- ObjVar
-- atmVclStatClp0CellOuts
-- ObjVar
-- atmVclStatTaggedOuts
-- ObjVar
-- atmVplStatTotalCellIns
-- ObjVar
-- atmVplStatClp0CellIns
-- ObjVar
-- atmVplStatTotalDiscards
-- ObjVar
-- atmVplStatClp0Discards
-- ObjVar
-- atmVplStatTotalCellOuts
-- ObjVar
-- atmVplStatClp0CellOuts
-- ObjVar
-- atmVplStatTaggedOuts
-- ObjVar
-- atmVplLogicalPortDef
-- ObjVar
-- atmIntfSigVccRxTrafficDescrIndex
-- ObjVar
-- atmIntfSigVccTxTrafficDescrIndex
-- OptGroup
-- atmSwitchServcGroup
-- ObjVar
-- atmIfRegAddrRowStatus
-- ObjVar
-- atmSigSupportClgPtyNumDel
-- ObjVar
-- atmSigSupportClgPtySubAddr
-- ObjVar
-- atmSigSupportCldPtySubAddr
-- ObjVar
-- atmSigSupportHiLyrInfo
-- ObjVar
-- atmSigSupportLoLyrInfo
-- ObjVar
-- atmSigSupportBlliRepeatInd
-- ObjVar
-- atmSigSupportAALInfo
-- ObjVar
-- atmSigSupportPrefCarrier
-- ObjVar
-- atmSvcVpCrossConnectRowStatus
-- ObjVar
-- atmSvcVcCrossConnectRowStatus
-- OptGroup
-- atmServcGroup
-- OptGroup
-- atmHostGroup
-- ObjVar
-- atmVclAddrType
-- ObjVar
-- atmVclAddrRowStatus
-- ObjVar
-- atmVclGenSigDescrIndex
-- ObjVar
-- atmSigDescrParamAalType
-- ObjVar
-- atmSigDescrParamAalSscsType
-- ObjVar
-- atmSigDescrParamBhliType
-- ObjVar
-- atmSigDescrParamBhliInfo
-- ObjVar
-- atmSigDescrParamBbcConnConf
-- ObjVar
-- atmSigDescrParamBlliLayer2
-- ObjVar
-- atmSigDescrParamBlliLayer3
-- ObjVar
-- atmSigDescrParamBlliPktSize
-- ObjVar
-- atmSigDescrParamBlliSnapId
-- ObjVar
-- atmSigDescrParamBlliOuiPid
-- ObjVar
-- atmSigDescrParamRowStatus
END
Reference in New Issue View Git Blame Copy Permalink