MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/WS-SW-AUTHENTICATEDNTP-MIB.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1189 lines
29 KiB
Plaintext
Raw Blame History

--
-- WS-SW-AUTHENTICATEDNTP-MIB.my
-- MIB generated by MG-SOFT Visual MIB Builder Version 6.0 Build 88
-- Friday, May 16, 2008 at 16:25:24
--
WS-SW-AUTHENTICATEDNTP-MIB DEFINITIONS ::= BEGIN
IMPORTS
OBJECT-GROUP, MODULE-COMPLIANCE
FROM SNMPv2-CONF
Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY
FROM SNMPv2-SMI
TruthValue, DisplayString, RowStatus, TEXTUAL-CONVENTION
FROM SNMPv2-TC
wsSwNtp
FROM WS-SW-SMI;
-- 1.3.6.1.4.1.388.14.2.12.1
wsSwNTPModule MODULE-IDENTITY
LAST-UPDATED "200805161624Z" -- May 16, 2008 at 16:24 GMT
ORGANIZATION
"Symbol Technologies"
CONTACT-INFO
"Symbol Technologies, Inc.
Customer Service
Postal:
One Symbol Plaza
Holtsville, NY 11742-1300
USA
Tel: +1. 631.738.6213
E-mail: support@symbol.com
Web: http://www.symbol.com/support"
DESCRIPTION
"Description."
REVISION "200805161624Z" -- May 16, 2008 at 16:24 GMT
DESCRIPTION
"01a01
Corrected the defintion of ntpBroadcastDelay."
::= { wsSwNtp 1 }
--
-- Textual conventions
--
NTPLeapIndicator ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This is a two-bit code warning of an impending leap
second to be inserted in the NTP timescale. The bits
are set before 23:59 on the day of insertion and reset
after 00:00 on the following day. This causes the
number of seconds (rollover interval) in the day of
insertion to be increased or decreased by one. The two
bits are coded as below,
00, no warning
01, last minute has 61 seconds
10, last minute has 59 seconds
11, alarm condition (clock not synchronized)"
REFERENCE
"D.L. Mills, 'Network Time Protocol(Version 3)',
RFC-1305, March 1992, Section 3.2.1"
SYNTAX INTEGER
{
noWarning(0),
addSecond(1),
subtractSecond(2),
alarm(3)
}
NTPStratum ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the stratum of the clock. The stratum
defines the accuracy of a time server. Higher the
stratum, lower the accuracy.
0, unspecified
1, primary reference (e.g., calibrated atomic clock,
radio clock)
2-255, secondary reference (via NTP)"
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 2.2"
SYNTAX Integer32 (0..255)
NTPSignedTimeValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT
"2d.2d"
STATUS current
DESCRIPTION
"The time in seconds that could represent signed
quantities like time delay with respect to some
source. This textual-convention is specific to Cisco
implementation of NTP where 32-bit integers are used
for such quantities. The signed integer part is in
the first 16 bits and the fraction part is in the
last 16 bits."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Sections 2, 3.2.1"
SYNTAX OCTET STRING (SIZE (4))
NTPUnsignedTimeValue ::= TEXTUAL-CONVENTION
DISPLAY-HINT
"2d.2d"
STATUS current
DESCRIPTION
"The time in seconds that could represent unsigned
quantities like maximum error of the local clock
with respect to some source. This textual-convention
is specific to Cisco implementation of NTP where
32-bit integers are used for such quantities. The
unsigned integer part is in the first 16 bits and the
fraction part is in the last 16 bits."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Sections 2, 3.2.1"
SYNTAX OCTET STRING (SIZE (4))
NTPRefId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The reference clock identifier. In the case of
stratum 0 (unspecified) or stratum 1 (primary
reference source), this is a four-octet,
left-justified, zero-padded ASCII string as defined
in RFC-1305. In the case of stratum 2 and greater
(secondary reference) this is the four-octet Internet
address of the peer selected for synchronization.
Some examples of stratum 0 identifiers are,
DCN, DCN routing protocol
NIST, NIST public modem
TSP, TSP time protocol
DTS, Digital Time Service
Some examples of stratum 1 identifiers are,
ATOM, Atomic clock (calibrated)
VLF, VLF radio (OMEGA,, etc.)
LORC, LORAN-C radionavigation
GOES, GOES UHF environment satellite
GPS, GPS UHF satellite positioning"
REFERENCE
"D.L. Mills, Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 3.2.1"
SYNTAX OCTET STRING (SIZE (4))
NTPTimeStamp ::= TEXTUAL-CONVENTION
DISPLAY-HINT
"4d.4d"
STATUS current
DESCRIPTION
"NTP timestamps are represented as a 64-bit
unsigned fixed-point number, in seconds relative to
00:00 on 1 January 1900. The integer part is in the
first 32 bits and the fraction part is in the last
32 bits."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 3.1"
SYNTAX OCTET STRING (SIZE (8))
NTPPollInterval ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The minimum interval between transmitted NTP
messages, in seconds as a power of two. For
instance, a value of six indicates a minimum
interval of 64 seconds."
SYNTAX Integer32 (-20..20)
NTPAssocIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The association identifier of the peer. Every peer
with which an NTP server is associated with is
identified by an association identifier."
SYNTAX Integer32 (0..2147483647)
NtpKeyIdentifier ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Description."
SYNTAX Integer32 (1..255)
-- Textual conventions
--
NtpKeySource ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Description."
SYNTAX INTEGER (0..255)
--
-- Node definitions
--
--
-- Time (in microseconds) taken by NTP broadcast packet
-- on the wire.
-- 1.3.6.1.4.1.388.14.2.12.1.1
ntpBroadcastDelay OBJECT-TYPE
SYNTAX INTEGER (0..999999)
UNITS "microseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Estimated round trip NTP broadcast delay.
The value '0' has a special meaning in that
it is used for clearing this object.
The values 1-999999 when set give a measure
of this delay in microseconds."
::= { wsSwNTPModule 1 }
-- Enable/disable local hardware clock as a master clock for
-- this switch. Make sure the local clock is synchronized to a
-- reliable source.
-- 1.3.6.1.4.1.388.14.2.12.1.2
ntpMasterClockMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 2 }
-- Stratum number for the local master clock.
-- 1.3.6.1.4.1.388.14.2.12.1.3
ntpMasterClockStratum OBJECT-TYPE
SYNTAX INTEGER (1..15)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 3 }
-- Enable/disable ntp broadcast client mode.
-- 1.3.6.1.4.1.388.14.2.12.1.4
ntpBroadcastClientMode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 4 }
-- 1.3.6.1.4.1.388.14.2.12.1.5
ntpaccessGroupPeer OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 5 }
-- 1.3.6.1.4.1.388.14.2.12.1.6
ntpaccessGroupQueryOnly OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 6 }
-- 1.3.6.1.4.1.388.14.2.12.1.7
ntpaccessGroupServe OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 7 }
-- 1.3.6.1.4.1.388.14.2.12.1.8
ntpaccessGroupServeOnly OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 8 }
-- 1.3.6.1.4.1.388.14.2.12.1.9
ntpAutoKey OBJECT-TYPE
SYNTAX INTEGER
{
disabled(0),
hostEnabled(1),
clientOnlyEnabled(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 9 }
-- 1.3.6.1.4.1.388.14.2.12.1.10
ntpAuthenticate OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 10 }
-- 1.3.6.1.4.1.388.14.2.12.1.11
wsSwNtpSystem OBJECT IDENTIFIER ::= { wsSwNTPModule 11 }
-- Two-bit code warning of an impending leap second to
-- be inserted in the NTP timescale.
-- This object can be set only when the wsSwSysStratum has a value of 1
-- 1.3.6.1.4.1.388.14.2.12.1.11.1
wsSwSysLeap OBJECT-TYPE
SYNTAX NTPLeapIndicator
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 1 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.2
wsSwSysStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 2 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.3
wsSwSysPrecision OBJECT-TYPE
SYNTAX Integer32 (-20..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 3 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.4
wsSwSysRootDelay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 4 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.5
wsSwSysRootDispersion OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 5 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.6
wsSwSysRefId OBJECT-TYPE
SYNTAX NTPRefId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 6 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.7
wsSwSysRefTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 7 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.8
wsSwSysPoll OBJECT-TYPE
SYNTAX NTPPollInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 8 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.9
wsSwSysClock OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 9 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.10
wsSwSysFrequency OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 10 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.11
wsSwSysJitter OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 11 }
-- 1.3.6.1.4.1.388.14.2.12.1.11.12
wsSwSysStability OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSystem 12 }
-- 1.3.6.1.4.1.388.14.2.12.1.12
wsSwNtpSymmKeyTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsSwNtpSymmKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 12 }
-- 1.3.6.1.4.1.388.14.2.12.1.12.1
wsSwNtpSymmKeyEntry OBJECT-TYPE
SYNTAX WsSwNtpSymmKeyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { wsSwNtpKeyId }
::= { wsSwNtpSymmKeyTable 1 }
WsSwNtpSymmKeyEntry ::=
SEQUENCE {
wsSwNtpKeyId
NtpKeyIdentifier,
wsSwNtpKeyValue
DisplayString,
wsSwNtpKeyIfTrusted
TruthValue,
wsSwNtpKeyRowStatus
RowStatus
}
-- 1.3.6.1.4.1.388.14.2.12.1.12.1.1
wsSwNtpKeyId OBJECT-TYPE
SYNTAX NtpKeyIdentifier
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSymmKeyEntry 1 }
-- 1.3.6.1.4.1.388.14.2.12.1.12.1.2
wsSwNtpKeyValue OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSymmKeyEntry 2 }
-- 1.3.6.1.4.1.388.14.2.12.1.12.1.3
wsSwNtpKeyIfTrusted OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSymmKeyEntry 3 }
-- 1.3.6.1.4.1.388.14.2.12.1.12.1.4
wsSwNtpKeyRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Description."
::= { wsSwNtpSymmKeyEntry 4 }
-- 1.3.6.1.4.1.388.14.2.12.1.13
wsSwNTPNeighborTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsSwNTPNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 13 }
-- 1.3.6.1.4.1.388.14.2.12.1.13.1
wsSwNTPNeighborEntry OBJECT-TYPE
SYNTAX WsSwNTPNeighborEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each peers' entry provides NTP information retrieved
from a particular peer NTP server. Each peer is
identified by a unique association identifier.
Entries are automatically created when the user
configures the NTP server to be associated with remote
peers. Similarly entries are deleted when the user
removes the peer association from the NTP server.
Entries can also be created by the management station
by setting values for the following objects:
cntpPeersPeerAddress or cntpPeersPeerName,
cntpPeersHostAddress and
cntpPeersMode and making the cntpPeersEntryStatus as
active(1). At the least, the management station has
to set a value for cntpPeersPeerAddress or
cntpPeersPeerName to make the row active."
INDEX { wsSwNeighborPeerName, wsSwNeighborType }
::= { wsSwNTPNeighborTable 1 }
WsSwNTPNeighborEntry ::=
SEQUENCE {
wsSwNeighborPeerName
DisplayString,
wsSwNeighborType
INTEGER,
wsSwNeighborAuthKey
INTEGER,
wsSwNeighborPrefPeer
INTEGER,
wsSwNeighborNtpVersion
INTEGER,
wsSwNeighborEntryStatus
RowStatus
}
-- 1.3.6.1.4.1.388.14.2.12.1.13.1.1
wsSwNeighborPeerName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the peer. "
::= { wsSwNTPNeighborEntry 1 }
-- 1.3.6.1.4.1.388.14.2.12.1.13.1.2
wsSwNeighborType OBJECT-TYPE
SYNTAX INTEGER
{
server(0),
peer(1),
broadcast(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type can be server(0), peer(1) or broadcast(2)"
::= { wsSwNTPNeighborEntry 2 }
-- -1 -> Autokey, 0 -> No authentication
-- > 0 -> Symmetric key value to be used for authentication.
-- 1.3.6.1.4.1.388.14.2.12.1.13.1.3
wsSwNeighborAuthKey OBJECT-TYPE
SYNTAX INTEGER (-1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Valid key values are 1 to 65534. Value of -1 indicates Autokey option. Value 0 indicates removal of key."
::= { wsSwNTPNeighborEntry 3 }
-- 1.3.6.1.4.1.388.14.2.12.1.13.1.4
wsSwNeighborPrefPeer OBJECT-TYPE
SYNTAX INTEGER
{
no(1),
yes(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies whether this peer is the
preferred one over the others. The valid value for this are no(1) and yes(2)"
::= { wsSwNTPNeighborEntry 4 }
-- 1.3.6.1.4.1.388.14.2.12.1.13.1.5
wsSwNeighborNtpVersion OBJECT-TYPE
SYNTAX INTEGER
{
version1(1),
version2(2),
version3(3),
version4(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The version values can range from 1 to 4. Value 0 indicates removal of version configuration"
::= { wsSwNTPNeighborEntry 5 }
-- 1.3.6.1.4.1.388.14.2.12.1.13.1.6
wsSwNeighborEntryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status object for this row. When a management
station is creating a new row, it should set the
value for cntpPeersPeerAddress at least, before the
row can be made active(1)."
::= { wsSwNTPNeighborEntry 6 }
-- 1.3.6.1.4.1.388.14.2.12.1.14
wsSwPeersStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF WsSwPeersStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
::= { wsSwNTPModule 14 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1
wsSwPeersStatusEntry OBJECT-TYPE
SYNTAX WsSwPeersStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Description."
INDEX { wsSwPeersStatusIndex }
::= { wsSwPeersStatusTable 1 }
WsSwPeersStatusEntry ::=
SEQUENCE {
wsSwPeersStatusIndex
Unsigned32,
wsSwPeersStatusPeerAddress
DisplayString,
wsSwPeersWhen
DisplayString,
wsSwPeersStatusPort
Integer32,
wsSwPeersHostAddress
DisplayString,
wsSwPeersHostPort
Integer32,
wsSwPeersStratum
NTPStratum,
wsSwPeersPeerPoll
NTPPollInterval,
wsSwPeersHostPoll
NTPPollInterval,
wsSwPeersPrecision
Integer32,
wsSwPeersRootDelay
DisplayString,
wsSwPeersRootDispersion
DisplayString,
wsSwPeersRefId
NTPRefId,
wsSwPeersRefTime
DisplayString,
wsSwPeersOrgTime
DisplayString,
wsSwPeersReceiveTime
DisplayString,
wsSwPeersTransmitTime
DisplayString,
wsSwPeersReach
Integer32,
wsSwPeersOffset
DisplayString,
wsSwPeersDelay
DisplayString,
wsSwPeersDispersion
DisplayString,
wsSwPeersSanity
INTEGER,
wsSwPeersValidity
TruthValue,
wsSwPeersLocalMode
DisplayString,
wsSwPeersPeerMode
DisplayString,
wsSwPeersAssociationType
INTEGER,
wsSwPeersAuthority
INTEGER,
wsSwPeersLeapState
INTEGER,
wsSwPeersFiltDelay
DisplayString,
wsSwPeersFiltOffset
DisplayString,
wsSwPeersFiltError
DisplayString,
wsSwPeersRemotePollInterval
Integer32
}
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.1
wsSwPeersStatusIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..32768)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 1 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.1
wsSwPeersStatusPeerAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 2 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.2
wsSwPeersWhen OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time of Last NTP packet received"
::= { wsSwPeersStatusEntry 3 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.3
wsSwPeersStatusPort OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 4 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.4
wsSwPeersHostAddress OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP address of the local host. Multi-homing can
be supported using this object."
::= { wsSwPeersStatusEntry 5 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.5
wsSwPeersHostPort OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The UDP port number on which the local host receives
NTP messages."
::= { wsSwPeersStatusEntry 6 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.7
wsSwPeersStratum OBJECT-TYPE
SYNTAX NTPStratum
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The stratum of the peer clock."
::= { wsSwPeersStatusEntry 7 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.8
wsSwPeersPeerPoll OBJECT-TYPE
SYNTAX NTPPollInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval at which the peer polls the local host."
::= { wsSwPeersStatusEntry 8 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.9
wsSwPeersHostPoll OBJECT-TYPE
SYNTAX NTPPollInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interval at which the local host polls the peer."
::= { wsSwPeersStatusEntry 9 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.10
wsSwPeersPrecision OBJECT-TYPE
SYNTAX Integer32 (-20..20)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Signed integer indicating the precision of the peer
clock, in seconds to the nearest power of two. The
value must be rounded to the next larger power of
two; for instance, a 50-Hz (20 ms) or 60-Hz
(16.67 ms) power-frequency clock would be assigned
the value -5 (31.25 ms), while a 1000-Hz (1 ms)
crystal-controlled clock would be assigned the value
-9 (1.95 ms)."
::= { wsSwPeersStatusEntry 10 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.11
wsSwPeersRootDelay OBJECT-TYPE
SYNTAX DisplayString
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A signed fixed-point number indicating the total
round-trip delay in seconds, from the peer to the
primary reference source at the root of the
synchronization subnet."
::= { wsSwPeersStatusEntry 11 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.12
wsSwPeersRootDispersion OBJECT-TYPE
SYNTAX DisplayString
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum error in seconds, of the peer clock
relative to the primary reference source at the root
of the synchronization subnet. Only positive values
greater than zero are possible."
::= { wsSwPeersStatusEntry 12 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.13
wsSwPeersRefId OBJECT-TYPE
SYNTAX NTPRefId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reference identifier of the peer."
::= { wsSwPeersStatusEntry 13 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.14
wsSwPeersRefTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time at the peer when its clock was last
updated. If the peer clock has never been
synchronized, the value is zero."
::= { wsSwPeersStatusEntry 14 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.15
wsSwPeersOrgTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time at the peer, when its latest
NTP message was sent. If the peer becomes unreachable
the value is set to zero."
::= { wsSwPeersStatusEntry 15 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.16
wsSwPeersReceiveTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time, when the latest NTP message from
the peer arrived. If the peer becomes unreachable
the value is set to zero."
::= { wsSwPeersStatusEntry 16 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.17
wsSwPeersTransmitTime OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local time at which the NTP message departed the
sender."
::= { wsSwPeersStatusEntry 17 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.19
wsSwPeersReach OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A shift register of used to determine the
reachability status of the peer, with bits entering
from the least significant (rightmost) end. A peer is
considered reachable if at least one bit in this
register is set to one i.e, if the value of this
object is non-zero.
The data in the shift register would be populated by
the NTP protocol procedures."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 3.2.3"
::= { wsSwPeersStatusEntry 18 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.21
wsSwPeersOffset OBJECT-TYPE
SYNTAX DisplayString
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated offset of the peer clock relative to
the local clock, in seconds. The host determines the
value of this object using the NTP clock-filter
algorithm."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 3.2.5"
::= { wsSwPeersStatusEntry 19 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.22
wsSwPeersDelay OBJECT-TYPE
SYNTAX DisplayString
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated round-trip delay of the peer clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the NTP clock-filter
algorithm."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 3.2.5"
::= { wsSwPeersStatusEntry 20 }
-- 1.3.6.1.4.1.388.14.2.12.1.8.1.23
wsSwPeersDispersion OBJECT-TYPE
SYNTAX DisplayString
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The estimated maximum error of the peer clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the NTP clock-filter
algorithm."
REFERENCE
"D.L. Mills, 'Network Time Protocol (Version 3)',
RFC-1305, March 1992, Section 3.2.5"
::= { wsSwPeersStatusEntry 21 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.22
wsSwPeersSanity OBJECT-TYPE
SYNTAX INTEGER
{
insane(1),
sane(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 22 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.23
wsSwPeersValidity OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 23 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.24
wsSwPeersLocalMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 24 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.25
wsSwPeersPeerMode OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 25 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.26
wsSwPeersAssociationType OBJECT-TYPE
SYNTAX INTEGER
{
configured(1),
dynamic(2),
unknown(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 26 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.27
wsSwPeersAuthority OBJECT-TYPE
SYNTAX INTEGER
{
master(1),
selected(2),
candidate(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 27 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.28
wsSwPeersLeapState OBJECT-TYPE
SYNTAX INTEGER
{
add(1),
sub(2),
unsynced(3),
unknown(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 28 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.29
wsSwPeersFiltDelay OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 29 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.30
wsSwPeersFiltOffset OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 30 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.31
wsSwPeersFiltError OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Description."
::= { wsSwPeersStatusEntry 31 }
-- 1.3.6.1.4.1.388.14.2.12.1.14.1.32
wsSwPeersRemotePollInterval OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Remote Poll Interval"
::= { wsSwPeersStatusEntry 32 }
-- 1.3.6.1.4.1.388.14.2.12.1.15
wsSwNtpMIBConformance OBJECT IDENTIFIER ::= { wsSwNTPModule 15 }
-- 1.3.6.1.4.1.388.14.2.12.1.15.1
wsSwNtpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Description."
MODULE wsSwNTPModule
MANDATORY-GROUPS { wsSwNtpGroupAll }
MODULE -- this module
MANDATORY-GROUPS { wsSwNtpGroupAll }
::= { wsSwNtpMIBConformance 1 }
-- 1.3.6.1.4.1.388.14.2.12.1.16
wsSWNtpGroups OBJECT IDENTIFIER ::= { wsSwNTPModule 16 }
-- 1.3.6.1.4.1.388.14.2.12.1.16.1
wsSwNtpGroupAll OBJECT-GROUP
OBJECTS { ntpBroadcastDelay, ntpMasterClockMode, ntpMasterClockStratum, ntpBroadcastClientMode, wsSwSysLeap,
wsSwSysStratum, wsSwSysPrecision, wsSwSysRootDelay, wsSwSysRootDispersion, wsSwSysRefId,
wsSwSysRefTime, wsSwSysPoll, wsSwSysClock, wsSwSysFrequency, wsSwSysJitter,
wsSwSysStability, wsSwNtpKeyId, wsSwNtpKeyValue, wsSwNtpKeyIfTrusted, wsSwNtpKeyRowStatus,
wsSwNeighborPeerName, wsSwNeighborType, wsSwNeighborAuthKey, wsSwNeighborEntryStatus, wsSwNeighborPrefPeer,
wsSwNeighborNtpVersion, ntpaccessGroupPeer, ntpaccessGroupQueryOnly, ntpaccessGroupServe, ntpAutoKey,
ntpaccessGroupServeOnly, ntpAuthenticate, wsSwPeersStatusPeerAddress, wsSwPeersStatusPort, wsSwPeersHostAddress,
wsSwPeersHostPort, wsSwPeersStratum, wsSwPeersPeerPoll, wsSwPeersHostPoll, wsSwPeersPrecision,
wsSwPeersRootDelay, wsSwPeersRootDispersion, wsSwPeersRefId, wsSwPeersRefTime, wsSwPeersOrgTime,
wsSwPeersReceiveTime, wsSwPeersTransmitTime, wsSwPeersReach, wsSwPeersOffset, wsSwPeersDelay,
wsSwPeersDispersion, wsSwPeersFiltError, wsSwPeersFiltOffset, wsSwPeersFiltDelay, wsSwPeersLeapState,
wsSwPeersAuthority, wsSwPeersAssociationType, wsSwPeersPeerMode, wsSwPeersLocalMode, wsSwPeersValidity,
wsSwPeersRemotePollInterval, wsSwPeersStatusIndex, wsSwPeersSanity, wsSwPeersWhen }
STATUS current
DESCRIPTION
"Description."
::= { wsSWNtpGroups 1 }
END
--
-- WS-SW-AUTHENTICATEDNTP-MIB.my
--
Reference in New Issue View Git Blame Copy Permalink