MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-MGX82XX-RPM-CONN-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

677 lines
19 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-MGX82XX-RPM-CONN-MIB.my
-- RPM Connection MIB in MGX8250 products.
--
-- September 2002, Subra Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-MGX82XX-RPM-CONN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION FROM SNMPv2-TC
rpmChanGrp FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoMgx82xxRpmConnMIB MODULE-IDENTITY
LAST-UPDATED "200209080000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The connection MIB module for RPM(Router Blade)
service module in MGX8250/MGX8230 products.
The 'channel' and 'connection' and 'connection endpoint'
mean same in this MIB."
REVISION "200209080000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 62 }
RpmNsapAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"ATM address used by the networking entity. The only
address type presently supported is NSAP (20 octets)"
SYNTAX OCTET STRING (SIZE(20))
rpmChanGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF RpmChanGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains endpoint configuration
information for connections applicable to
RPM service module."
::= { rpmChanGrp 1 }
rpmChanGrpEntry OBJECT-TYPE
SYNTAX RpmChanGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for logical channel. Each entry
corresponds to a connection endpoint identified
by Slot number and channel number."
INDEX { rpmChanSlotNum, rpmChanNum }
::= { rpmChanGrpTable 1 }
RpmChanGrpEntry ::=
SEQUENCE {
rpmChanSlotNum Integer32,
rpmChanInterface Integer32,
rpmChanNum Integer32,
rpmChanRowStatus INTEGER,
rpmChanVcd Integer32,
rpmChanVpi Integer32,
rpmChanVci Integer32,
rpmChanSubInterface Integer32,
rpmChanLocalVpi Integer32,
rpmChanLocalVci Integer32,
rpmChanLocalNsap RpmNsapAddress,
rpmChanRemoteVpi Integer32,
rpmChanRemoteVci Integer32,
rpmChanRemoteNsap RpmNsapAddress,
rpmChanType INTEGER,
rpmChanConnType INTEGER,
rpmChanServiceType INTEGER,
rpmChanMastership INTEGER,
rpmChanRtePriority Integer32,
rpmChanMaxCost Integer32,
rpmChanRestrictTrkType INTEGER,
rpmChanPCR Integer32,
rpmChanRemotePCR Integer32,
rpmChanMCR Integer32,
rpmChanRemoteMCR Integer32,
rpmChanPercentUtil Integer32,
rpmChanRemotePercentUtil Integer32,
rpmChanMidLow Integer32,
rpmChanMidHigh Integer32,
rpmChanBurstSize Integer32,
rpmChanEncapType INTEGER,
rpmChanInArpFreq Integer32,
rpmChanOAMloopback Integer32,
rpmChanState INTEGER,
rpmChanVirtualTemplate Integer32,
rpmChanAbrRDF Integer32,
rpmChanAbrRIF Integer32
}
rpmChanSlotNum OBJECT-TYPE
SYNTAX Integer32 (1..30)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the slot number of the RPM card."
::= { rpmChanGrpEntry 1 }
rpmChanInterface OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the RPM's backplane interface.
Currently there is only one interface."
::= { rpmChanGrpEntry 2 }
rpmChanNum OBJECT-TYPE
SYNTAX Integer32 (16..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the channel number.
This is also called Logical Connection Number(LCN).
This is a unique number which identifies a
connection.
The LCN maps VPI and VCI.
For VCC, VCI range is 1..3825, and LCN range is 16..3840.
LCN = VCI + 16.
For VPC, VPI range is 1..255 and LCN range is 3841..4095.
LCN = VPI + 3840."
::= { rpmChanGrpEntry 3 }
rpmChanRowStatus OBJECT-TYPE
SYNTAX INTEGER {
add(1),
del(2),
mod(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the status of this channel.
add(1) : Channel is added.
del(2) : channel is deleted.
mod(3) : Set to this value before modifying objects
related to connection endpoints."
::= { rpmChanGrpEntry 4 }
rpmChanVcd OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Virtual Circuit Descriptor. A unique number
which identifies a connection."
::= { rpmChanGrpEntry 5 }
rpmChanVpi OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPI value for this channel.
For VPC, VPI range is 1..255 and
LCN range is 3841..4095.
LCN = VPI + 3840"
::= { rpmChanGrpEntry 6 }
rpmChanVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VCI value for this channel.
For VCC, VCI range is 1..3825, and
LCN range is 16..3840.
LCN = VCI + 16."
::= { rpmChanGrpEntry 7 }
rpmChanSubInterface OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the RPM's backplane sub-interface."
::= { rpmChanGrpEntry 8 }
rpmChanLocalVpi OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This VPI together with the local VCI
and NSAP represents the local end point
in this connection. The VPI value is zero for
rpmChanConnType value of vcc(2)."
::= { rpmChanGrpEntry 9 }
rpmChanLocalVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This VCI together with the local
VPI and NSAP represents the local
end point in this connection."
::= { rpmChanGrpEntry 10 }
rpmChanLocalNsap OBJECT-TYPE
SYNTAX RpmNsapAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the local NSAP address.
The bytes are mapped as follows:
prefix : 13 bytes
Cisco ID : 2 bytes
Reserved : 2 bytes
Slot/Port : 2 bytes[5 bit slot, 11 bits port]
Selector : 1 byte.
Of the 13 bytes for the node name, only the first
8 bytes are used. If the node name is n
(0 < n < 8) bytes long, the node name must be left
justified ( Bytes 1 to n contain the node name
and bytes (n+1) to 8 must be 0 ).
Bytes 9-13 must be always 0."
::= { rpmChanGrpEntry 11 }
rpmChanRemoteVpi OBJECT-TYPE
SYNTAX Integer32 (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This VPI together with the remote
VCI and NSAP represents the remote
end point in this connection."
::= { rpmChanGrpEntry 12 }
rpmChanRemoteVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This VCI together with the remote
VPI and NSAP represents the remote
end point in this connection."
::= { rpmChanGrpEntry 13 }
rpmChanRemoteNsap OBJECT-TYPE
SYNTAX RpmNsapAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the remote NSAP address.
The bytes are mapped as follows:
prefix : 13 bytes
Cisco ID : 2 bytes
Reserved : 2 bytes
Slot/Port : 2 bytes[5 bit slot, 11 bits port]
Selector : 1 byte."
::= { rpmChanGrpEntry 14 }
rpmChanType OBJECT-TYPE
SYNTAX INTEGER {
svc(1),
pvc(2),
spvc(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the channel type
svc(1) : Switched Virtual Connection
pvc(2) : Permanent Virtual Connection
spvc(3) : Soft PVC."
::= { rpmChanGrpEntry 15 }
rpmChanConnType OBJECT-TYPE
SYNTAX INTEGER {
vpc(1),
vcc(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies the connection type
vpc(1) : Virtual Path Connection
vcc(1) : Virtual Channel Connection"
::= { rpmChanGrpEntry 16 }
rpmChanServiceType OBJECT-TYPE
SYNTAX INTEGER {
cbr (1),
vbr (2),
ubr (4),
atfr (5),
abrstd (6),
abrfst (7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the connection service type.
cbr (1) : Constant Bit Rate
vbr (2) : Variable Bit Rate
ubr (4) : Unspecified Bit Rate
atfr (5) : ATM Frame Relay
abrstd (6) : Standard ABR
abrfst (7) : foresight ABR."
::= { rpmChanGrpEntry 17 }
rpmChanMastership OBJECT-TYPE
SYNTAX INTEGER {
master (1),
slave (2),
unknown (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This specifies which end of the connection
is the master. This is used by PXM to determine
if this end point is master or slave."
::= { rpmChanGrpEntry 18 }
rpmChanRtePriority OBJECT-TYPE
SYNTAX Integer32 (1..15)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is also known as class of service,
it is used by PXM to determine how important
this connection is when selecting connections
to route."
::= { rpmChanGrpEntry 19 }
rpmChanMaxCost OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Maximum allowed cost. It is related to
Cost Based Routing. This is used by PXM so
that it won't choose a path with a cost
greater than this configured level."
::= { rpmChanGrpEntry 20 }
rpmChanRestrictTrkType OBJECT-TYPE
SYNTAX INTEGER {
noRestriction (1),
terrestrialTrunk (2),
satelliteTrunk (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Restricted trunk type for routing, used by PXM.
It specifies that the connection either cannot
be routed over satellite trunks or terrestrial
trunks, or it can be on any type of trunk."
::= { rpmChanGrpEntry 21 }
rpmChanPCR OBJECT-TYPE
SYNTAX Integer32 (0..353208)
UNITS "cells-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak cell rate.(in cells per sec.)"
::= { rpmChanGrpEntry 22 }
rpmChanRemotePCR OBJECT-TYPE
SYNTAX Integer32 (0..353208)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Peak cell rate of the remote endpoint of
the connection. If not set, its value will
be same as the value of rpmChanPCR."
::= { rpmChanGrpEntry 23 }
rpmChanMCR OBJECT-TYPE
SYNTAX Integer32 (0..353208)
UNITS "cells-per-second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum cell rate.(in cells per sec.)."
::= { rpmChanGrpEntry 24 }
rpmChanRemoteMCR OBJECT-TYPE
SYNTAX Integer32 (0..353208)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum cell rate of the remote endpoint.
If this is not set, its value will be same
as value of rpmChanMCR."
::= { rpmChanGrpEntry 25 }
rpmChanPercentUtil OBJECT-TYPE
SYNTAX Integer32 ( 0..100 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the expected long-term utilization of the
channel by this end-point."
::= { rpmChanGrpEntry 26 }
rpmChanRemotePercentUtil OBJECT-TYPE
SYNTAX Integer32 ( 0..100 )
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the expected long-term utilization of the
channel by the other end-point. If this is not
specified in the connection setup request,
it'll be set to be the same as the local end."
::= { rpmChanGrpEntry 27 }
rpmChanEncapType OBJECT-TYPE
SYNTAX INTEGER {
aal5snap(1),
aal34smds(2),
aal5nlpid(3),
qsaal(4),
ilmi(5),
aal5muxXNS(6),
aal5muxIP(7),
aal5muxVINES(8),
aal5muxDECNET(9),
aal5muxNOVELL1(10),
ppp(11),
unknown(12)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the ATM adaptation
layer (AAL) and Encapsulation type.
aal5snap - LLC/SNAP precedes the protocol datagram.
aal34smds - Encapsulation for SMDS network.
aal5nlpid - Encapsulation that allows ATM interfaces to
interoperate with HSSI.
qsaal - signaling type PVC used for setting up or
tearing down SVCs.
ilmi - used to set up communication with ILMI.
aal5mux[protocol] - a MUX-type Virtual circuit.
ppp - PPP over ATM.
The Encapsulation types aal34smds, qsaal and ilmi
are not supported."
::= { rpmChanGrpEntry 28 }
rpmChanMidLow OBJECT-TYPE
SYNTAX Integer32 (0..1023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Starting Message Identifier Number for this PVC."
::= { rpmChanGrpEntry 29 }
rpmChanMidHigh OBJECT-TYPE
SYNTAX Integer32 (0..1023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Ending Message Identifier Number for this PVC."
::= { rpmChanGrpEntry 30 }
rpmChanBurstSize OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum number of ATM cells the
virtual circuit can transmit."
::= { rpmChanGrpEntry 31 }
rpmChanInArpFreq OBJECT-TYPE
SYNTAX Integer32 (0..60)
UNITS "minutes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies how often Inverse ARP datagrams
will be sent on this virtual circuit. The
value zero will disable the IN-ARP for this
channel. This object is supported only
for the value of rpmChanEncapType = aal5snap."
::= { rpmChanGrpEntry 32 }
rpmChanOAMloopback OBJECT-TYPE
SYNTAX Integer32 (0..600)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies how often to generate
an OAM F5 loopback cell from this virtual circuit.
The value zero will disable generation of OAM F5
loopback cells."
::= { rpmChanGrpEntry 33 }
rpmChanState OBJECT-TYPE
SYNTAX INTEGER {
notConfigured (1),
active (2),
failed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the status of this channel.
1 ==> notConfigured
2 ==> active
3 ==> failed.
Currently 'failed' state is not supported.
When the channel is not added, the state is
notConfigured."
::= { rpmChanGrpEntry 34 }
rpmChanVirtualTemplate OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the Virtual Template used for CISCO PPP.
If it is not using Virtual Template then this value
is zero."
::= { rpmChanGrpEntry 35 }
rpmChanAbrRDF OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is valid only for ABR Service Type.
Rate Decrease Factor: Controls the rate
decrease which occurs when backward RM-cells
with CI=1 are received. Larger values lead to
faster rate decrease."
REFERENCE
"ATM Forum Traffic Management Specification
Version 4.0 Section 5.10.2"
::= { rpmChanGrpEntry 36 }
rpmChanAbrRIF OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is valid only for ABR Service Type.
Rate Increase Factor: Controls the rate
increase which occurs when a backward RM-cell
is received with CI=0 and NI=0. Larger values
lead to faster rate increase."
REFERENCE
"ATM Forum Traffic Management Specification
Version 4.0 Section 5.10.2"
::= { rpmChanGrpEntry 37 }
-- conformance information
cmrConnMIBConformance
OBJECT IDENTIFIER ::= { ciscoMgx82xxRpmConnMIB 2 }
cmrConnMIBCompliances
OBJECT IDENTIFIER ::= { cmrConnMIBConformance 1 }
cmrConnMIBGroups
OBJECT IDENTIFIER ::= { cmrConnMIBConformance 2 }
-- compliance statements
cmrConnMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for the
Cisco MGX RPM connection management group."
MODULE -- this module
MANDATORY-GROUPS { cmrConnConfGroup }
::= { cmrConnMIBCompliances 1 }
-- units of conformance
cmrConnConfGroup OBJECT-GROUP
OBJECTS {
rpmChanSlotNum,
rpmChanInterface,
rpmChanNum,
rpmChanRowStatus,
rpmChanVcd,
rpmChanVpi,
rpmChanVci,
rpmChanSubInterface,
rpmChanLocalVpi,
rpmChanLocalVci,
rpmChanLocalNsap,
rpmChanRemoteVpi,
rpmChanRemoteVci,
rpmChanRemoteNsap,
rpmChanType,
rpmChanConnType,
rpmChanServiceType,
rpmChanMastership,
rpmChanRtePriority,
rpmChanMaxCost,
rpmChanRestrictTrkType,
rpmChanPCR,
rpmChanRemotePCR,
rpmChanMCR,
rpmChanRemoteMCR,
rpmChanPercentUtil,
rpmChanRemotePercentUtil,
rpmChanMidLow,
rpmChanMidHigh,
rpmChanBurstSize,
rpmChanEncapType,
rpmChanInArpFreq,
rpmChanOAMloopback,
rpmChanState,
rpmChanVirtualTemplate,
rpmChanAbrRDF,
rpmChanAbrRIF
}
STATUS current
DESCRIPTION
"The objects related to Connections on RPM
card."
::= { cmrConnMIBGroups 1 }
END
Reference in New Issue View Git Blame Copy Permalink