MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-18 00:13:02 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-IPSEC-SIGNALING-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2100 lines
67 KiB
Plaintext
Raw Blame History

-- *------------------------------------------------------------------
-- * CISCO-IPSEC-SIGNALING-MIB.my:
-- * Generic IPsec/FC-SP Signaling MIB
-- *
-- * Apr 2004, S Ramakrishnan
-- *
-- * Copyright (c) 2004 by cisco Systems, Inc.
-- * All rights reserved.
-- *------------------------------------------------------------------
CISCO-IPSEC-SIGNALING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
Counter64,
Gauge32,
Unsigned32 FROM SNMPv2-SMI
TimeStamp,
TimeInterval,
TruthValue FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
CIPsecControlProtocol,
CIPsecEncryptionKeySize,
CIPsecPhase1PeerIdentityType,
CIPsecIkeHashAlgorithm,
CIPsecIkeAuthMethod,
CIPsecEncryptAlgorithm,
CIPsecPhase1TunnelIndex,
CIPsecTunnelStatus FROM CISCO-IPSEC-TC
ciscoMgmt FROM CISCO-SMI;
ciscoIPsecSignalingMIB MODULE-IDENTITY
LAST-UPDATED "200409220000Z"
ORGANIZATION "Cisco Systems"
CONTACT-INFO
"
Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-ipsecmib@external.cisco.com
"
DESCRIPTION
"
This MIB Module models status, performance and failures
of a protocol with the generic characteristics of signalling
protocols used with IPsec and FC-SP protocols. Examples
of such protocols include IKE, KINK, etc. This MIB views the
common attributes of such protocols. Signaling protocols are
also referred in this document as 'Control Protocols', since
they perform session control.
This MIB is an attempt to capture the generic aspects
of the signaling activity. The protocol-specific aspects
of a signaling protocol still need to be captured
in a protocol-specific MIB (e.g., CISCO-IKE-FLOW-MIB, etc.).
Acronyms
The following acronyms are used in this document:
IPsec: Secure IP Protocol
VPN: Virtual Private Network
ISAKMP: Internet Security Association and Key Exchange
Protocol
IKE: Internet Key Exchange Protocol
SA: Security Association
(ref: rfc2408).
Phase 1 Tunnel:
An ISAKMP SA can be regarded as representing
a flow of ISAKMP/IKE traffic. Hence an ISAKMP
is referred to as a 'Phase 1 Tunnel' in this
document.
Control Tunnel:
Another term for a Phase 1 Tunnel.
Phase 2 Tunnel:
An instance of a non-ISAKMP SA bundle in which all
the SA share the same proxy identifiers (IDii,IDir)
protect the same stream of application traffic.
Such an SA bundle is termed a 'Phase 2 Tunnel'.
Note that a Phase 2 tunnel may comprise different
SA bundles and different number of SA bundles at
different times (due to key refresh).
History of the MIB
A precursor to this MIB was the IPsec Flow Monitor MIB, which
combined the objects pertaining to IKE and IPsec (Phase-2)
into a single MIB module. Furthermore, the MIB supported only
one signaling protocol, IKEv1, in addition to manual keying.
The MIB was written by Tivoli and implemented in IBM Nways
routers in 1999. During late 1999, Cisco adopted the MIB and
together with Tivoli publised the IPsec Flow Monitor MIB in
IETF IPsec WG in draft-ietf-ipsec-flow-monitoring-mib-00.txt.
In 2000, the MIB was Cisco-ized and implemented as
CISCO-IPSEC-FLOW-MONITOR-MIB in IOS and VPN3000 platforms.
With the evolution of IKEv2, the MIB was modified and
presented to the IPsec WG again in May 2003 in
draft-ietf-ipsec-flow-monitoring-mib-02.txt.
With the emergence to multiple signaling protocols, it has
further evolved to define separate set of MIB modules to
instrument IPsec signaling alone. Thus, this MIB module
is now the generic IPsec signaling MIB.
Overview of MIB
The MIB contains major groups of objects which are
used to manage the generic aspects of IPsec signaling.
These groups include a global statistics, control tunnel table,
Peer association group, control tunnel history group,
signaling failure group and notification group.
The global statistics, tunnel table and peer association
groups aid in the real-time monitoring of IPsec signaling
activity.
The History group is to aid applications that do
trending analysis.
The Failure group is to enable an operator to
do troubleshooting and debugging.
Further, counters are supported to aid detection
of potential security violations.
The notifications are modeled as generic IPsec control
notifications and are parameterized by the identity of the
specific signaling protocol which caused the notification
to be issued.
"
REVISION "200409220000Z"
DESCRIPTION
"
Initial version of the MIB.
"
::= { ciscoMgmt 438 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- IPsec Signaling MIB Object Groups
--
-- This MIB module contains the following groups:
-- 1) Global Statistics
-- 2) Signaling tunnel table
-- 3) IPsec Signaling History Group
-- 4) IPsec Signaling Failure Group
-- 5) IPsec Signaling Notification Control Group
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
ciscoIPsecSigMIBNotifs OBJECT IDENTIFIER
::= { ciscoIPsecSignalingMIB 0 }
ciscoIPsecSigMIBObjects OBJECT IDENTIFIER
::= { ciscoIPsecSignalingMIB 1 }
ciscoIPsecSigMIBConform OBJECT IDENTIFIER
::= { ciscoIPsecSignalingMIB 2 }
cisgIpsSgCurrentActivity OBJECT IDENTIFIER
::= { ciscoIPsecSigMIBObjects 1 }
cisgIpsSgPeerAssociations OBJECT IDENTIFIER
::= { ciscoIPsecSigMIBObjects 2 }
cisgIpsSgHistory OBJECT IDENTIFIER
::= { ciscoIPsecSigMIBObjects 3 }
cisgIpsSgFailures OBJECT IDENTIFIER
::= { ciscoIPsecSigMIBObjects 4 }
cisgIpsSgNotificationCntl OBJECT IDENTIFIER
::= { ciscoIPsecSigMIBObjects 5 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The IPsec Phase-1 Global Statistics
-- There is one row in the following table for each
-- control protocol implemented by the managed entity.
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgGlobalStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisgIpsSgGlobalStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This Signaling Protocol global statistics table.
There is one row in the following table for each
signaling protocol implemented by the managed entity.
There is no row corresponding to the instance
'cpNone'.
If the managed entity implements more than one
signaling protocol, the aggregate statistics
across all the supported signaling protocols
must be computed by the network management station
manually; in other words, there is no conceptual row
in this table corresponding to 'all signaling protocols'.
"
::= { cisgIpsSgCurrentActivity 1 }
cisgIpsSgGlobalStatsEntry OBJECT-TYPE
SYNTAX CisgIpsSgGlobalStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Each entry contains the global statistics pertaining
to a specific signaling protocol.
"
INDEX { cisgIpsSgProtocol }
::= { cisgIpsSgGlobalStatsTable 1}
CisgIpsSgGlobalStatsEntry ::= SEQUENCE {
cisgIpsSgProtocol CIPsecControlProtocol,
cisgIpsSgGlobalActiveTunnels Gauge32,
cisgIpsSgGlobalPreviousTunnels Counter64,
cisgIpsSgGlobalInOctets Counter64,
cisgIpsSgGlobalInPkts Counter64,
cisgIpsSgGlobalInDropPkts Counter64,
cisgIpsSgGlobalInNotifys Counter64,
cisgIpsSgGlobalInP2SaDelReqs Counter64,
cisgIpsSgGlobalOutOctets Counter64,
cisgIpsSgGlobalOutPkts Counter64,
cisgIpsSgGlobalOutDropPkts Counter64,
cisgIpsSgGlobalOutNotifys Counter64,
cisgIpsSgGlobalOutP2SaDelReqs Counter64,
cisgIpsSgGlobalInitTunnels Counter64,
cisgIpsSgGlobalInitTunnelFails Counter64,
cisgIpsSgGlobalRespTunnels Counter64,
cisgIpsSgGlobalRespTunnelFails Counter64,
cisgIpsSgGlobalSysCapFails Counter64,
cisgIpsSgGlobalAuthFails Counter64,
cisgIpsSgGlobalDecryptFails Counter64,
cisgIpsSgGlobalHashValidFails Counter64,
cisgIpsSgGlobalBadTunnelRefs Counter64,
cisgIpsSgGlobalInP1SaDelReqs Counter64,
cisgIpsSgGlobalOutP1SaDelReqs Counter64
}
cisgIpsSgProtocol OBJECT-TYPE
SYNTAX CIPsecControlProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The identity of the signaling protocol used by the
control tunnel corresponding to this conceptual row.
"
::= { cisgIpsSgGlobalStatsEntry 1 }
cisgIpsSgGlobalActiveTunnels OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The number of currently active Phase-1
control tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 2 }
cisgIpsSgGlobalPreviousTunnels OBJECT-TYPE
SYNTAX Counter64
UNITS "SAs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
High capacity counter to accumulate the
total number of Phase-1 control tunnels that
are no longer active.
"
::= { cisgIpsSgGlobalStatsEntry 3 }
cisgIpsSgGlobalInOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of octets received by all
currently and previously active Phase-1
Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 4 }
cisgIpsSgGlobalInPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets received by all currently
and previously active Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 5 }
cisgIpsSgGlobalInDropPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets which were dropped
during receive processing by all currently and
previously active Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 6 }
cisgIpsSgGlobalInNotifys OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of notification payloads received by all
currently and previously active Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 7 }
cisgIpsSgGlobalInP2SaDelReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-2 security association delete
requests received by all currently and previously
active and Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 8 }
cisgIpsSgGlobalOutOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of octets sent by all currently
and previously active and Phase-1 Control
Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 9 }
cisgIpsSgGlobalOutPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets sent by all currently
and previously active and Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 10 }
cisgIpsSgGlobalOutDropPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets which were dropped
during send processing by all currently and previously
active Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 11 }
cisgIpsSgGlobalOutNotifys OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of notification payloads sent by all
currently and previously active Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 12 }
cisgIpsSgGlobalOutP2SaDelReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-2 tunnel delete requests
sent by all currently and previously active Phase-1
Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 13 }
cisgIpsSgGlobalInitTunnels OBJECT-TYPE
SYNTAX Counter64
UNITS "SAs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-1 currently and previously active
Control Tunnels which were locally initiated.
"
::= { cisgIpsSgGlobalStatsEntry 14 }
cisgIpsSgGlobalInitTunnelFails OBJECT-TYPE
SYNTAX Counter64
UNITS "SAs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-1 currently and previously active
Control Tunnels which were locally initiated and
failed to activate.
"
::= { cisgIpsSgGlobalStatsEntry 15 }
cisgIpsSgGlobalRespTunnels OBJECT-TYPE
SYNTAX Counter64
UNITS "SAs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-1 currently and previously active
Control Tunnels which were remotely initiated.
"
::= { cisgIpsSgGlobalStatsEntry 16 }
cisgIpsSgGlobalRespTunnelFails OBJECT-TYPE
SYNTAX Counter64
UNITS "SAs"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-1 currently and previously active
Control Tunnels which were remotely initiated and failed
to activate.
"
::= { cisgIpsSgGlobalStatsEntry 17 }
cisgIpsSgGlobalSysCapFails OBJECT-TYPE
SYNTAX Counter64
UNITS "Failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of system capacity failures
which occurred during processing of all current
and previously active Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 18 }
cisgIpsSgGlobalAuthFails OBJECT-TYPE
SYNTAX Counter64
UNITS "Failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of authentications which ended
in failure by all current and previous Phase-1
Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 19 }
cisgIpsSgGlobalDecryptFails OBJECT-TYPE
SYNTAX Counter64
UNITS "Failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of decryption operations in all current
and previous Phase-1 Control Tunnels which failed to yield
the original payload.
"
::= { cisgIpsSgGlobalStatsEntry 20 }
cisgIpsSgGlobalHashValidFails OBJECT-TYPE
SYNTAX Counter64
UNITS "Failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of hash validation operations in all
current and previous Phase-1 Control Tunnels which resulted
in failure.
"
::= { cisgIpsSgGlobalStatsEntry 21 }
cisgIpsSgGlobalBadTunnelRefs OBJECT-TYPE
SYNTAX Counter64
UNITS "Failures"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of incoming packets that refer to
non-existent Phase-1 control tunnels which occurred during
processing of all current and previous Phase-1 Control
Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 22 }
cisgIpsSgGlobalInP1SaDelReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-1 security association
delete requests received by all currently and
previously active and Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 23 }
cisgIpsSgGlobalOutP1SaDelReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-1 security association
delete requests sent by all currently and
previously active and Phase-1 Control Tunnels.
"
::= { cisgIpsSgGlobalStatsEntry 24 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Phase-1 Control Tunnel Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgTunnelTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisgIpsSgTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This table lists active Phase-1 control tunnels.
There is one entry in this table for each
active Control Tunnel.
"
::= { cisgIpsSgCurrentActivity 2 }
cisgIpsSgTunnelEntry OBJECT-TYPE
SYNTAX CisgIpsSgTunnelEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Each entry contains the attributes associated with
an active Phase-1 control Tunnel.
"
INDEX { cisgIpsSgProtocol, cisgIpsSgTunIndex }
::= { cisgIpsSgTunnelTable 1}
CisgIpsSgTunnelEntry ::= SEQUENCE {
cisgIpsSgTunIndex CIPsecPhase1TunnelIndex,
cisgIpsSgTunLocalType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunLocalValue SnmpAdminString,
cisgIpsSgTunLocalAddressType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunLocalAddress SnmpAdminString,
cisgIpsSgTunLocalName SnmpAdminString,
cisgIpsSgTunRemoteType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunRemoteValue SnmpAdminString,
cisgIpsSgTunRemoteAddressType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunRemoteAddress SnmpAdminString,
cisgIpsSgTunRemoteName SnmpAdminString,
cisgIpsSgTunEncryptAlgo CIPsecEncryptAlgorithm,
cisgIpsSgTunEncryptKeySize CIPsecEncryptionKeySize,
cisgIpsSgTunHashAlgo CIPsecIkeHashAlgorithm,
cisgIpsSgTunAuthMethod CIPsecIkeAuthMethod,
cisgIpsSgTunLifeTime Unsigned32,
cisgIpsSgTunActiveTime TimeInterval,
cisgIpsSgTunInOctets Counter32,
cisgIpsSgTunInPkts Counter32,
cisgIpsSgTunInDropPkts Counter32,
cisgIpsSgTunInNotifys Counter32,
cisgIpsSgTunOutOctets Counter32,
cisgIpsSgTunOutPkts Counter32,
cisgIpsSgTunOutDropPkts Counter32,
cisgIpsSgTunOutNotifys Counter32,
cisgIpsSgTunOutP2SaDelReqs Counter32,
cisgIpsSgTunStatus CIPsecTunnelStatus,
cisgIpsSgTunAction INTEGER
}
cisgIpsSgTunIndex OBJECT-TYPE
SYNTAX CIPsecPhase1TunnelIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of the Phase-1 Tunnel Table.
The value of the index is a number which begins
at 1 and is incremented with each tunnel that is
created. The value of this object will wrap at
4,294,967,296.
"
::= { cisgIpsSgTunnelEntry 1 }
cisgIpsSgTunLocalType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of the identity used by the managed entity
authenticating itself to the peer in the setup of the
tunnel corresponding to this conceptual row.
"
::= { cisgIpsSgTunnelEntry 2 }
cisgIpsSgTunLocalValue OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of the local peer identity.
"
::= { cisgIpsSgTunnelEntry 3 }
cisgIpsSgTunLocalAddressType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of the address of the local endpoint of
the Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 4 }
cisgIpsSgTunLocalAddress OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The address of the local endpoint for
the Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 5 }
cisgIpsSgTunLocalName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The DNS name of the local IP address for the Phase-1
Tunnel. If the DNS name associated with the local tunnel
endpoint is not known, then the value of this
object will be a zero-length string.
"
::= { cisgIpsSgTunnelEntry 6 }
cisgIpsSgTunRemoteType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of the identity used by the remote peer in
authenticating itself to the local peer in the
setup of the tunnel corresponding to this
conceptual row.
"
::= { cisgIpsSgTunnelEntry 7 }
cisgIpsSgTunRemoteValue OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of the remote peer identity.
"
::= { cisgIpsSgTunnelEntry 8 }
cisgIpsSgTunRemoteAddressType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of the address of the remote endpoint for
the Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 9 }
cisgIpsSgTunRemoteAddress OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The address of the remote endpoint of the
Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 10 }
cisgIpsSgTunRemoteName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The DNS name of the remote address of Phase-1
Tunnel. If the DNS name associated with the remote
tunnel endpoint is not known, then the value of this
object will be a zero-length string.
"
::= { cisgIpsSgTunnelEntry 11 }
cisgIpsSgTunEncryptAlgo OBJECT-TYPE
SYNTAX CIPsecEncryptAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The encryption algorithm used in Phase-1 negotiations on the
control tunnel corresponding to this conceptual row.
"
::= { cisgIpsSgTunnelEntry 12 }
cisgIpsSgTunEncryptKeySize OBJECT-TYPE
SYNTAX CIPsecEncryptionKeySize
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The size in bits of the key used for encrypting
payloads by the tunnel corresponding to this
conceptual row.
"
::= { cisgIpsSgTunnelEntry 13 }
cisgIpsSgTunHashAlgo OBJECT-TYPE
SYNTAX CIPsecIkeHashAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The hash algorithm used in Phase-1 negotiations on the
control tunnel corresponding to this conceptual row.
"
::= { cisgIpsSgTunnelEntry 14 }
cisgIpsSgTunAuthMethod OBJECT-TYPE
SYNTAX CIPsecIkeAuthMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The authentication method used in Phase-1 negotiations
on the control tunnel corresponding to this conceptual row.
"
::= { cisgIpsSgTunnelEntry 15 }
cisgIpsSgTunLifeTime OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The negotiated LifeTime of the Phase-1 Tunnel in seconds.
"
::= { cisgIpsSgTunnelEntry 16 }
cisgIpsSgTunActiveTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The length of time the Phase-1 tunnel has been
active in hundredths of seconds.
"
::= { cisgIpsSgTunnelEntry 17 }
cisgIpsSgTunInOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of octets received by this Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 18 }
cisgIpsSgTunInPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets received by this Phase-1
Tunnel.
"
::= { cisgIpsSgTunnelEntry 19 }
cisgIpsSgTunInDropPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets dropped by this Phase-1
Tunnel during receive processing.
"
::= { cisgIpsSgTunnelEntry 20 }
cisgIpsSgTunInNotifys OBJECT-TYPE
SYNTAX Counter32
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of notification payloads received by
this Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 21 }
cisgIpsSgTunOutOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of octets sent by this Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 22 }
cisgIpsSgTunOutPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets sent by this Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 23 }
cisgIpsSgTunOutDropPkts OBJECT-TYPE
SYNTAX Counter32
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets dropped by this Phase-1 Tunnel
during send processing.
"
::= { cisgIpsSgTunnelEntry 24 }
cisgIpsSgTunOutNotifys OBJECT-TYPE
SYNTAX Counter32
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of notification payloads sent by this
Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 25 }
cisgIpsSgTunOutP2SaDelReqs OBJECT-TYPE
SYNTAX Counter32
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-2 security association
delete requests sent by this Phase-1 Tunnel.
"
::= { cisgIpsSgTunnelEntry 26 }
cisgIpsSgTunStatus OBJECT-TYPE
SYNTAX CIPsecTunnelStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The status of the MIB table row.
"
::= { cisgIpsSgTunnelEntry 27 }
cisgIpsSgTunAction OBJECT-TYPE
SYNTAX INTEGER {
none(1),
clear(2),
rekey(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action to be taken on this tunnel.
If 'clear', then this tunnel is cleared.
If 'rekey', then rekeying is forced on this tunnel.
The value 'none' would be returned on doing read of this
object. "
::= { cisgIpsSgTunnelEntry 28 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Control Tunnel History Group
--
-- This group consists of:
-- 1) Control History Global Objects
-- 2) Control Tunnel History Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgHistGlobal OBJECT IDENTIFIER
::= { cisgIpsSgHistory 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Control History Global Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgHistGlobalCntl OBJECT IDENTIFIER
::= { cisgIpsSgHistGlobal 1 }
cisgIpsSgHistTableSize OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The window size of the control tunnel
History Tables.
The control tunnel history table is implemented as
a sliding window in which at most the last
'cisgIpsSgHistTableSize' entries are maintained.
This object is, hence, used to control the size of
the tunnel history table.
An implementation may choose suitable values for this
element based on the available resources.
If an SNMP SET request specifies a value outside this
window for this element, in appropriate SNMP error
code should be returned.
Setting this value to zero is equivalent to deleting
all conceptual rows in the archiving table
('cisgIpsSgTunnelHistTable') and disabling the
archiving of entries in the tables.
"
::= { cisgIpsSgHistGlobalCntl 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The IKE Tunnel History Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgTunnelHistTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisgIpsSgTunnelHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The control tunnel History Table. This table
lists all instances of control tunnels that were
successfully established but which are no longer in
operation. An entry transitions to this table from
the active tunnel table ('cisgIpsSgTunnelTable') into
this table after it expires, is aborted or terminated.
This table is conceptually a sliding window in
which only the last 'N' entries are maintained,
where 'N' is the value of the object
'cisgIpsSgHistTableSize'.
If the value of 'cisgIpsSgHistTableSize' is 0,
archiving of entries in this table is disabled.
"
::= { cisgIpsSgHistory 2 }
cisgIpsSgTunnelHistEntry OBJECT-TYPE
SYNTAX CisgIpsSgTunnelHistEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Each entry contains the attributes associated with
a previously active control Tunnel.
"
INDEX {
cisgIpsSgProtocol,
cisgIpsSgTunHistIndex
}
::= { cisgIpsSgTunnelHistTable 1 }
CisgIpsSgTunnelHistEntry ::= SEQUENCE {
cisgIpsSgTunHistIndex Unsigned32,
cisgIpsSgTunHistTermReason INTEGER,
cisgIpsSgTunHistActiveIndex CIPsecPhase1TunnelIndex,
cisgIpsSgTunHistPeerLocalType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunHistPeerLocalValue SnmpAdminString,
cisgIpsSgTunHistPeerIntIndex Unsigned32,
cisgIpsSgTunHistPeerRemoteType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunHistPeerRemoteValue SnmpAdminString,
cisgIpsSgTunHistLocalAddrType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunHistLocalAddr SnmpAdminString,
cisgIpsSgTunHistLocalName SnmpAdminString,
cisgIpsSgTunHistRemoteAddrType CIPsecPhase1PeerIdentityType,
cisgIpsSgTunHistRemoteAddr SnmpAdminString,
cisgIpsSgTunHistRemoteName SnmpAdminString,
cisgIpsSgTunHistEncryptAlgo CIPsecEncryptAlgorithm,
cisgIpsSgTunHistEncryptKeySize CIPsecEncryptionKeySize,
cisgIpsSgTunHistHashAlgo CIPsecIkeHashAlgorithm,
cisgIpsSgTunHistAuthMethod CIPsecIkeAuthMethod,
cisgIpsSgTunHistLifeTime Unsigned32,
cisgIpsSgTunHistStartTime TimeStamp,
cisgIpsSgTunHistActiveTime TimeInterval,
cisgIpsSgTunHistInOctets Counter64,
cisgIpsSgTunHistInPkts Counter64,
cisgIpsSgTunHistInDropPkts Counter64,
cisgIpsSgTunHistInNotifys Counter64,
cisgIpsSgTunHistInP2SaDelReqs Counter64,
cisgIpsSgTunHistOutOctets Counter64,
cisgIpsSgTunHistOutPkts Counter64,
cisgIpsSgTunHistOutDropPkts Counter64,
cisgIpsSgTunHistOutNotifys Counter64,
cisgIpsSgTunHistOutP2SaDelReqs Counter64
}
cisgIpsSgTunHistIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The index of the Phase-1 Control Tunnel History
Table. This object has no relationship to the
cisgIpsSgTunIndex of the tunnel when it was active.
The value of the index is a number which
begins at one and is incremented with each
tunnel that ends. The value of this object
will wrap at 4,294,967,296.
"
::= { cisgIpsSgTunnelHistEntry 1 }
cisgIpsSgTunHistTermReason OBJECT-TYPE
SYNTAX INTEGER {
other(1),
normal(2),
operRequest(3),
peerDelRequest(4),
peerLost(5),
applicationInitiated(6),
userAuthFailure(7),
localFailure(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The reason the Phase-1 Control Tunnel was terminated.
Possible reasons include:
1 = other
2 = normal termination
3 = operator request
4 = peer delete request was received
5 = contact with peer was lost
6 = applicationInitiated (eg: L2TP requesting
the termination)
7 = failure of extended user authentication
8 = local failure occurred.
"
::= { cisgIpsSgTunnelHistEntry 2 }
cisgIpsSgTunHistActiveIndex OBJECT-TYPE
SYNTAX CIPsecPhase1TunnelIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The index of the previously active
Control Tunnel. This object must correspond
to an expired IKE tunnel.
"
::= { cisgIpsSgTunnelHistEntry 3 }
cisgIpsSgTunHistPeerLocalType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of local peer identity.
"
::= { cisgIpsSgTunnelHistEntry 4 }
cisgIpsSgTunHistPeerLocalValue OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of the local peer identity.
"
::= { cisgIpsSgTunnelHistEntry 5 }
cisgIpsSgTunHistPeerIntIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The arbitrary index to keep local-remote peer
association. This index is used to
uniquely identify multiple associations between
the local and remote peer.
"
::= { cisgIpsSgTunnelHistEntry 6 }
cisgIpsSgTunHistPeerRemoteType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of remote peer identity.
"
::= { cisgIpsSgTunnelHistEntry 7 }
cisgIpsSgTunHistPeerRemoteValue OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of the remote peer identity.
"
::= { cisgIpsSgTunnelHistEntry 8 }
cisgIpsSgTunHistLocalAddrType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of the address of the local endpoint
for the control tunnel.
"
::= { cisgIpsSgTunnelHistEntry 9 }
cisgIpsSgTunHistLocalAddr OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The address of the local endpoint for the
control tunnel.
"
::= { cisgIpsSgTunnelHistEntry 10 }
cisgIpsSgTunHistLocalName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The DNS name of the local address for the control
Tunnel. If the DNS name associated with the local
tunnel endpoint is not known, then the value of this
object will be a zero-length string.
"
::= { cisgIpsSgTunnelHistEntry 11 }
cisgIpsSgTunHistRemoteAddrType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of the address of the remote endpoint
for the control Tunnel.
"
::= { cisgIpsSgTunnelHistEntry 12 }
cisgIpsSgTunHistRemoteAddr OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The address of the remote endpoint for the
control Tunnel.
"
::= { cisgIpsSgTunnelHistEntry 13 }
cisgIpsSgTunHistRemoteName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The DNS name of the remote address of
control Tunnel. If the DNS name associated with
the remote tunnel endpoint is not known, then the
value of this object will be a zero-length string.
"
::= { cisgIpsSgTunnelHistEntry 14 }
cisgIpsSgTunHistEncryptAlgo OBJECT-TYPE
SYNTAX CIPsecEncryptAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The encryption algorithm used in control tunnel.
"
::= { cisgIpsSgTunnelHistEntry 15 }
cisgIpsSgTunHistEncryptKeySize OBJECT-TYPE
SYNTAX CIPsecEncryptionKeySize
UNITS "Bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The size in bits of the key which was negotiated
for the control tunnel to be used with the algorithm
denoted by the column 'cisgIpsSgTunEncryptAlgo'. For
DES and 3DES the key size is respectively 56 and 168.
For AES, this will denote the negotiated key size.
"
::= { cisgIpsSgTunnelHistEntry 16 }
cisgIpsSgTunHistHashAlgo OBJECT-TYPE
SYNTAX CIPsecIkeHashAlgorithm
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The hash algorithm used in control tunnel negotiations.
"
::= { cisgIpsSgTunnelHistEntry 17 }
cisgIpsSgTunHistAuthMethod OBJECT-TYPE
SYNTAX CIPsecIkeAuthMethod
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The authentication method used in control tunnel
negotiations.
"
::= { cisgIpsSgTunnelHistEntry 18 }
cisgIpsSgTunHistLifeTime OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The negotiated LifeTime of the control tunnel in seconds.
"
::= { cisgIpsSgTunnelHistEntry 19 }
cisgIpsSgTunHistStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of sysUpTime in hundredths of seconds when the
control tunnel was started.
"
::= { cisgIpsSgTunnelHistEntry 20 }
cisgIpsSgTunHistActiveTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The length of time the control tunnel has been active
in hundredths of seconds.
"
::= { cisgIpsSgTunnelHistEntry 21 }
cisgIpsSgTunHistInOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of octets received by this control
tunnel.
"
::= { cisgIpsSgTunnelHistEntry 22 }
cisgIpsSgTunHistInPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets received by this Phase-1
control tunnel.
"
::= { cisgIpsSgTunnelHistEntry 23 }
cisgIpsSgTunHistInDropPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets dropped by this control
Tunnel during receive processing.
"
::= { cisgIpsSgTunnelHistEntry 24 }
cisgIpsSgTunHistInNotifys OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of notification payloads received by
this control tunnel.
"
::= { cisgIpsSgTunnelHistEntry 25 }
cisgIpsSgTunHistInP2SaDelReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-2 tunnel delete requests
received by this control tunnel.
"
::= { cisgIpsSgTunnelHistEntry 26 }
cisgIpsSgTunHistOutOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of octets sent by this control Tunnel.
"
::= { cisgIpsSgTunnelHistEntry 27 }
cisgIpsSgTunHistOutPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets sent by this control Tunnel.
"
::= { cisgIpsSgTunnelHistEntry 28 }
cisgIpsSgTunHistOutDropPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of packets dropped by this control
Tunnel during send processing.
"
::= { cisgIpsSgTunnelHistEntry 29 }
cisgIpsSgTunHistOutNotifys OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of notification payloads sent by this
control Tunnel.
"
::= { cisgIpsSgTunnelHistEntry 30 }
cisgIpsSgTunHistOutP2SaDelReqs OBJECT-TYPE
SYNTAX Counter64
UNITS "Notification Payloads"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The total number of Phase-2 tunnel delete requests
sent by this control tunnel.
"
::= { cisgIpsSgTunnelHistEntry 31 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Control Tunnel Failure Group
--
-- This group consists of:
-- 1) Control Failure Global Objects
-- 2) Control Tunnel Failure Table
-- 3) Control Tunnel Failure Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgFailGlobal OBJECT IDENTIFIER
::= { cisgIpsSgFailures 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Failure Global Control Objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgFailGlobalCntl OBJECT IDENTIFIER
::= { cisgIpsSgFailGlobal 1 }
cisgIpsSgFailTableSize OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
The window size of the Internet Key Exchange Failure
Tables.
The Failure Table is implemented as a sliding window
in which only the last 'cisgIpsSgFailTableSize' entries
are maintained. This object is used specify the number
of entries which will be maintained in the control
tunnel Failure Table.
An implementation may choose suitable minimum and
maximum values for this element based on the local
policy and available resources. If an SNMP SET
request specifies a value outside this window for
this element, an appropriate SNMP error code must
be returned.
Setting this value to zero is equivalent to
deleting all conceptual rows in the archiving
tables ('cisgIpsSgFailTable') and disabling the
archiving of entries in this table.
"
::= { cisgIpsSgFailGlobalCntl 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Phase-1 Failure Table
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgFailTable OBJECT-TYPE
SYNTAX SEQUENCE OF CisgIpsSgFailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
This is the control tunnel Table and is
implemented as a sliding window in which only the
last 'N' entries are maintained. The maximum number
of entries is specified by the object
'cisgIpsSgFailTableSize'.
The failure records are catalogued under each
signaling protocol type; that is, the first index
of this table is the signaling protocol identifier
('cisgIpsSgProtocol'). The second index
('cisgIpsSgFailIndex') identifies the failure record
uniquely in the subcategory.
Should a failure be identified before the signaling
protocol itself has been identified by the managed
entity, the failure record will be classified under
'cpUnknown'.
"
::= { cisgIpsSgFailures 2 }
cisgIpsSgFailEntry OBJECT-TYPE
SYNTAX CisgIpsSgFailEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
Each entry contains the attributes associated
with an Phase-1 failure.
"
INDEX { cisgIpsSgProtocol, cisgIpsSgFailIndex }
::= { cisgIpsSgFailTable 1 }
CisgIpsSgFailEntry ::= SEQUENCE {
cisgIpsSgFailIndex Unsigned32,
cisgIpsSgFailReason INTEGER,
cisgIpsSgFailTime TimeStamp,
cisgIpsSgFailLocalType CIPsecPhase1PeerIdentityType,
cisgIpsSgFailLocalValue SnmpAdminString,
cisgIpsSgFailRemoteType CIPsecPhase1PeerIdentityType,
cisgIpsSgFailRemoteValue SnmpAdminString,
cisgIpsSgFailLocalAddress SnmpAdminString,
cisgIpsSgFailRemoteAddress SnmpAdminString
}
cisgIpsSgFailIndex OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"
The Phase-1 Failure Table index.
This object has no relationship to the
cisgIpsSgTunIndex of the tunnel when it was active.
The value of the index is a number which
begins at one and is incremented with each
Phase-1 failure. The value
of this object will wrap at 4,294,967,296.
"
::= { cisgIpsSgFailEntry 1 }
cisgIpsSgFailReason OBJECT-TYPE
SYNTAX INTEGER{
other(1),
peerDelRequest(2),
peerLost(3),
localFailure(4),
authFailure(5),
hashValidation(6),
encryptFailure(7),
internalError(8),
sysCapExceeded(9),
proposalFailure(10),
peerCertUnavailable(11),
peerCertNotValid(12),
localCertExpired(13),
crlFailure(14),
peerEncodingError(15),
nonExistentSa(16),
userAuthFailure(17),
operRequest(18),
deniedByAdmissionControl(19),
protocolSpecific(20)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The reason for the failure. Possible reasons
include:
1 = other
2 = peer delete request was received
3 = contact with peer was lost
4 = local failure occurred
5 = authentication failure
6 = hash validation failure
7 = encryption failure
8 = internal error occurred
9 = system capacity failure
10 = proposal failure
11 = peer's certificate is unavailable
12 = peer's certificate was found invalid
13 = local certificate expired
14 = certificate revoke list (crl) failure
15 = peer encoding error
16 = Reference to a non-existent control tunnel
17 = Extended User authentication failed
18 = operator requested termination.
19 = An attempt to establish a tunnel was aborted
by the admission control policy (this could
include a simple policy that limits the maximum
active tunnels)
20 = A protocol specific reason (look in the
protocol-specific MIB for more info).
"
::= { cisgIpsSgFailEntry 2 }
cisgIpsSgFailTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of sysUpTime in hundredths of seconds
at the time of the failure.
"
::= { cisgIpsSgFailEntry 3 }
cisgIpsSgFailLocalType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of local peer identity.
"
::= { cisgIpsSgFailEntry 4 }
cisgIpsSgFailLocalValue OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of the local peer identity.
"
::= { cisgIpsSgFailEntry 5 }
cisgIpsSgFailRemoteType OBJECT-TYPE
SYNTAX CIPsecPhase1PeerIdentityType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The type of remote peer identity.
"
::= { cisgIpsSgFailEntry 6 }
cisgIpsSgFailRemoteValue OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The value of the remote peer identity.
"
::= { cisgIpsSgFailEntry 7 }
cisgIpsSgFailLocalAddress OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The address of the local peer.
The value of cisgIpsSgFailLocalType identifies the
type of the address contained in this object.
"
::= { cisgIpsSgFailEntry 8 }
cisgIpsSgFailRemoteAddress OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(1..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"
The address of the remote peer.
The value of cisgIpsSgFailLocalType identifies the
type of the address contained in this object.
"
::= { cisgIpsSgFailEntry 9 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The Notification Control Group
--
-- This group of objects controls the emission of
-- SNMP notifications pertaining to the operation of
-- control tunnels.
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
cisgIpsSgNotifCntlAllNotifs OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object acts as the knob that controls the
the administrative state of sending any notification
defined in this MIB module. That is, a particular
notification 'foo' defined in this MIB module is
enabled if and only if the expression
cisgIpsSgNotifCntlAllNotifs && cisgIpsSgNotifCntl<foo>
evaluates to 'true'.
"
DEFVAL { true }
::= { cisgIpsSgNotificationCntl 1 }
cisgIpsSgNotifCntlTunnelStart OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object defines the administrative state of
sending the Control Tunnel Start notification.
If the value of this object is 'true', the issuing
of the notification 'cisgIpsSgTunnelStart' is enabled.
"
DEFVAL { false }
::= { cisgIpsSgNotificationCntl 2 }
cisgIpsSgNotifCntlTunnelStop OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object defines the administrative state
of sending the Control Tunnel Stop notification.
If the value of this object is 'true', the issuing
of the notification 'cisgIpsSgTunnelStop' is enabled.
"
DEFVAL { false }
::= { cisgIpsSgNotificationCntl 3 }
cisgIpsSgNotifCntlSysFailure OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object defines the administrative state
of sending the System Failure notification.
If the value of this object is 'true', the issuing
of the notification 'ciscoIpsSgSysFailure' is enabled.
"
DEFVAL { false }
::= { cisgIpsSgNotificationCntl 4 }
cisgIpsSgNotifCntlCertCrlFail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object defines the administrative
state of sending the Certificate/CRL Failure
notification.
If the value of this object is 'true', the issuing
of the notification 'ciscoIpsSgCertCrlFailure' is
enabled.
"
DEFVAL { false }
::= { cisgIpsSgNotificationCntl 5 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Internet Key Exchange Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
ciscoIpsSgTunnelStart NOTIFICATION-TYPE
OBJECTS {
cisgIpsSgTunLocalAddressType,
cisgIpsSgTunLocalAddress,
cisgIpsSgTunRemoteAddressType,
cisgIpsSgTunRemoteAddress,
cisgIpsSgTunLifeTime
}
STATUS current
DESCRIPTION
"
This notification is generated when an control tunnel
becomes active.
"
::= { ciscoIPsecSigMIBNotifs 1 }
ciscoIpsSgTunnelStop NOTIFICATION-TYPE
OBJECTS {
cisgIpsSgTunHistLocalAddrType ,
cisgIpsSgTunHistLocalAddr,
cisgIpsSgTunHistRemoteAddrType ,
cisgIpsSgTunHistRemoteAddr,
cisgIpsSgTunHistTermReason,
cisgIpsSgTunHistActiveTime
}
STATUS current
DESCRIPTION
"
This notification is generated when an
control tunnel becomes inactive.
"
::= { ciscoIPsecSigMIBNotifs 2 }
ciscoIpsSgSysFailure NOTIFICATION-TYPE
OBJECTS {
cisgIpsSgFailLocalAddress,
cisgIpsSgFailRemoteAddress
}
STATUS current
DESCRIPTION
"
This notification is generated when the processing
for an control Tunnel experiences an
system capacity error.
"
::= { ciscoIPsecSigMIBNotifs 3 }
ciscoIpsSgCertCrlFailure NOTIFICATION-TYPE
OBJECTS {
cisgIpsSgFailLocalAddress,
cisgIpsSgFailRemoteAddress
}
STATUS current
DESCRIPTION
"
This notification is generated when the
processing for an control Tunnel
experiences a Certificate or a Certificate
validation (CRL or OCSP) related error.
"
::= { ciscoIPsecSigMIBNotifs 4 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance Information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
ciscoIpsSgMIBCompliances OBJECT IDENTIFIER
::= { ciscoIPsecSigMIBConform 1 }
ciscoIpsSgMIBGroups OBJECT IDENTIFIER
::= { ciscoIPsecSigMIBConform 2 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Compliance Statements
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
ciscoIpsSgMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
the IPsec Signaling MIB."
MODULE -- this module
MANDATORY-GROUPS {
ciscoIpsSgActivityGroup,
ciscoIpsSgCoreHistoryGroup,
ciscoIpsSgCoreFailureGroup
}
GROUP ciscoIpsSgHistoryGroup
DESCRIPTION
"This group is optional and must be implemented
by the agent of the managed entity if and only
if
a) the managed entity implements signaling for
IPsec and FC-SP
b) and the managed entity implements historical
archiving of control tunnels."
GROUP ciscoIpsSgFailureGroup
DESCRIPTION
"This group is optional and must be implemented
by the agent of the managed entity if and only
if
a) the managed entity implements signaling for
IPsec and FC-SP and
b) the managed entity implements historical
archiving of setup and operational failures
of IPsec control tunnels."
GROUP ciscoIpsSgNotifcationGroup
DESCRIPTION
"This group is optional."
GROUP ciscoIpsSgNotifCntlGroup
DESCRIPTION
"The agent must implement this group if it
implements the group 'ciscoIpsSgNotifcationGroup'."
OBJECT cisgIpsSgTunAction
MIN-ACCESS read-only
DESCRIPTION
"It is compliant to support only a subset of the values
defined."
::= { ciscoIpsSgMIBCompliances 1 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Units of Conformance: List of current groups
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
ciscoIpsSgActivityGroup OBJECT-GROUP
OBJECTS {
cisgIpsSgGlobalActiveTunnels,
cisgIpsSgGlobalPreviousTunnels,
cisgIpsSgGlobalInOctets,
cisgIpsSgGlobalInPkts,
cisgIpsSgGlobalInDropPkts,
cisgIpsSgGlobalInNotifys,
cisgIpsSgGlobalInP2SaDelReqs,
cisgIpsSgGlobalOutOctets,
cisgIpsSgGlobalOutPkts,
cisgIpsSgGlobalOutDropPkts,
cisgIpsSgGlobalOutNotifys,
cisgIpsSgGlobalOutP2SaDelReqs,
cisgIpsSgGlobalInitTunnels,
cisgIpsSgGlobalInitTunnelFails,
cisgIpsSgGlobalRespTunnels,
cisgIpsSgGlobalRespTunnelFails,
cisgIpsSgGlobalSysCapFails,
cisgIpsSgGlobalAuthFails,
cisgIpsSgGlobalDecryptFails,
cisgIpsSgGlobalHashValidFails,
cisgIpsSgGlobalBadTunnelRefs,
cisgIpsSgGlobalInP1SaDelReqs,
cisgIpsSgGlobalOutP1SaDelReqs,
-- Tunnel-level metrics pertaining to
-- Signaling
cisgIpsSgTunLocalType,
cisgIpsSgTunLocalValue,
cisgIpsSgTunLocalAddressType,
cisgIpsSgTunLocalAddress,
cisgIpsSgTunLocalName,
cisgIpsSgTunRemoteType,
cisgIpsSgTunRemoteValue,
cisgIpsSgTunRemoteAddressType ,
cisgIpsSgTunRemoteAddress,
cisgIpsSgTunRemoteName,
cisgIpsSgTunEncryptAlgo,
cisgIpsSgTunEncryptKeySize,
cisgIpsSgTunHashAlgo,
cisgIpsSgTunAuthMethod,
cisgIpsSgTunLifeTime,
cisgIpsSgTunActiveTime,
cisgIpsSgTunInOctets,
cisgIpsSgTunInPkts,
cisgIpsSgTunInDropPkts,
cisgIpsSgTunInNotifys,
cisgIpsSgTunOutOctets,
cisgIpsSgTunOutPkts,
cisgIpsSgTunOutDropPkts,
cisgIpsSgTunOutNotifys,
cisgIpsSgTunOutP2SaDelReqs,
cisgIpsSgTunStatus,
cisgIpsSgTunAction
}
STATUS current
DESCRIPTION
"
This group consists of:
1) Signaling Global Objects
2) control Tunnel table.
"
::= { ciscoIpsSgMIBGroups 1 }
ciscoIpsSgCoreHistoryGroup OBJECT-GROUP
OBJECTS {
-- signaling History
-- Global Control Objects
cisgIpsSgHistTableSize
}
STATUS current
DESCRIPTION
"
This group consists of the core (mandatory)
objects pertaining to maintaining history of
signaling activity.
"
::= { ciscoIpsSgMIBGroups 2 }
ciscoIpsSgHistoryGroup OBJECT-GROUP
OBJECTS {
cisgIpsSgTunHistTermReason ,
cisgIpsSgTunHistActiveIndex ,
cisgIpsSgTunHistPeerLocalType ,
cisgIpsSgTunHistPeerLocalValue ,
cisgIpsSgTunHistPeerIntIndex ,
cisgIpsSgTunHistPeerRemoteType ,
cisgIpsSgTunHistPeerRemoteValue,
cisgIpsSgTunHistLocalAddrType ,
cisgIpsSgTunHistLocalAddr ,
cisgIpsSgTunHistLocalName ,
cisgIpsSgTunHistRemoteAddrType ,
cisgIpsSgTunHistRemoteAddr ,
cisgIpsSgTunHistRemoteName ,
cisgIpsSgTunHistEncryptAlgo ,
cisgIpsSgTunHistEncryptKeySize ,
cisgIpsSgTunHistHashAlgo ,
cisgIpsSgTunHistAuthMethod ,
cisgIpsSgTunHistLifeTime ,
cisgIpsSgTunHistStartTime ,
cisgIpsSgTunHistActiveTime ,
cisgIpsSgTunHistInOctets ,
cisgIpsSgTunHistInPkts ,
cisgIpsSgTunHistInDropPkts ,
cisgIpsSgTunHistInNotifys ,
cisgIpsSgTunHistInP2SaDelReqs ,
cisgIpsSgTunHistOutOctets ,
cisgIpsSgTunHistOutPkts ,
cisgIpsSgTunHistOutDropPkts ,
cisgIpsSgTunHistOutNotifys ,
cisgIpsSgTunHistOutP2SaDelReqs
}
STATUS current
DESCRIPTION
"
This group consists of objects that pertain
to maintenance of history of
signaling activity.
"
::= { ciscoIpsSgMIBGroups 3 }
ciscoIpsSgCoreFailureGroup OBJECT-GROUP
OBJECTS {
-- Objects associated with implementing
-- core failure group.
cisgIpsSgFailTableSize
}
STATUS current
DESCRIPTION
"
This group consists of the core (mandatory)
objects pertaining to maintaining history of
failure signaling activity.
"
::= { ciscoIpsSgMIBGroups 4 }
ciscoIpsSgFailureGroup OBJECT-GROUP
OBJECTS {
-- The Ipsec signaling failure group
cisgIpsSgFailReason ,
cisgIpsSgFailTime ,
cisgIpsSgFailLocalType ,
cisgIpsSgFailLocalValue ,
cisgIpsSgFailRemoteType ,
cisgIpsSgFailRemoteValue ,
cisgIpsSgFailLocalAddress ,
cisgIpsSgFailRemoteAddress
}
STATUS current
DESCRIPTION
"
This group consists of objects that pertain
to maintenance of history of failures
associated with Ipsec signaling activity.
"
::= { ciscoIpsSgMIBGroups 5 }
ciscoIpsSgNotifCntlGroup OBJECT-GROUP
OBJECTS {
cisgIpsSgNotifCntlAllNotifs,
cisgIpsSgNotifCntlTunnelStart,
cisgIpsSgNotifCntlTunnelStop,
cisgIpsSgNotifCntlSysFailure,
cisgIpsSgNotifCntlCertCrlFail
}
STATUS current
DESCRIPTION
"
This group of objects controls the sending
of notifications pertaining to signaling
operations.
"
::= { ciscoIpsSgMIBGroups 6 }
ciscoIpsSgNotifcationGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoIpsSgTunnelStart ,
ciscoIpsSgTunnelStop ,
ciscoIpsSgSysFailure ,
ciscoIpsSgCertCrlFailure
}
STATUS current
DESCRIPTION
"
This group contains the notifications pertaining
to Ipsec signaling operations.
"
::= { ciscoIpsSgMIBGroups 7 }
END
Reference in New Issue View Git Blame Copy Permalink