snmp_mib_archive/snmp_mib_archive/t/TRANGO-APEX-RF-MIB.mib

TRANGO-APEX-RF-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	OBJECT-IDENTITY,
	NOTIFICATION-TYPE,
        apex
                FROM TRANGO-APEX-MIB	        
        DisplayString
		FROM SNMPv2-TC
	MODULE-COMPLIANCE
		FROM SNMPv2-CONF;

-- *******************************************************************
-- ** RF/ODU Information ** trango.twb.apex.rf
-- *******************************************************************

rf			OBJECT IDENTIFIER ::= { apex 3 }

atpc			OBJECT IDENTIFIER ::= { rf 1 }

rfATPCEnable		OBJECT-TYPE
        SYNTAX	    	INTEGER { DISABLED(0), ENABLED(1) }
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Enable/Disable Automatic Transmit Power Control"
	::= { atpc 1 }

rfATPCMaxPower		OBJECT-TYPE
        SYNTAX		INTEGER
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Maximum ATPC power"
	::= { atpc 2 }

rfATPCStepSize		OBJECT-TYPE
    	SYNTAX		INTEGER (SIZE(1..5))
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"ATPC step size for each of the increment/decrement"
	::= { atpc 3 }

txfreq			OBJECT IDENTIFIER ::= { rf 2 }

rfTxFrequency		OBJECT-TYPE
        SYNTAX		Opaque
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set/Display the current TX frequency"
	::= { txfreq 1 }

rfTxFrequencyInt	OBJECT-TYPE
        SYNTAX		INTEGER
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set/Display the current TX frequency in integer"
	::= { txfreq 2 }

rxfreq			OBJECT IDENTIFIER ::= { rf 3 }

rfRxFrequency		OBJECT-TYPE
        SYNTAX		Opaque
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display the current RX frequency"
	::= { rxfreq 1 }

rfRxFrequencyInt	OBJECT-TYPE
        SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display the current RX frequency in integer"
	::= { rxfreq 2 }

speed			OBJECT IDENTIFIER ::= { rf 4 }

rfSymrate   		OBJECT-TYPE
	SYNTAX  	INTEGER {  RATE8(2), RATE12(3), RATE17(4), RATE26(5), RATE35(6), RATE43(7), RATE49(8) }
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Set/Display the current Symbol Rate"
	::= { speed 1 }

rfModulation   		OBJECT-TYPE
	SYNTAX  	INTEGER { QPSK(0), 16Q(1), 32Q(2), 64Q(3), 128Q(4), 256Q(5) }
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set/Display the current modulation"
	::= { speed 2 }

rfBPF   		OBJECT-TYPE
	SYNTAX  	INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display the current bandpass filter value"
	::= { speed 3 }

rfChannelWidth		OBJECT-TYPE
    	SYNTAX		INTEGER { BW10(0), BW20(1), BW28(2), BW40(3), BW50(4), BW80(5) }
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Display the current channel width"
	::= { speed 4 }

power			OBJECT IDENTIFIER ::= { rf 5 }

rfPower   		OBJECT-TYPE
        SYNTAX		Opaque
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set/Display the current power"
	::= { power 1 }

rfPowerInt   		OBJECT-TYPE
        SYNTAX		INTEGER
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set/Display the current power in integer"
	::= { power 2 }

rfRSSILEDEnable   	OBJECT-TYPE
        SYNTAX	    	INTEGER { DISABLED(0), ENABLED(1) }
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Enable/Disable ODU LED display for RSSI"
	::= { rf 6 }

rfTemp			OBJECT-TYPE
    	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Read current system Temperature"
	::= { rf 7 }

target			OBJECT IDENTIFIER ::= { rf 8 }

rfTargetRSSI		OBJECT-TYPE
    	SYNTAX		Opaque  
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set/Disable the current Target RSSI value in float value"
	::= { target 1 }

rfTargetRSSIInt		OBJECT-TYPE
    	SYNTAX		INTEGER  
	MAX-ACCESS	read-write
	STATUS		current
	DESCRIPTION	"Set/Disable the current Target RSSI value in integer"
	::= { target 2 }

rssi			OBJECT IDENTIFIER ::= { rf 9 }

rfRSSI			OBJECT-TYPE
    	SYNTAX		Opaque 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Read current RSSI value"
	::= { rssi 1 }

rfRSSIInt		OBJECT-TYPE
    	SYNTAX		INTEGER 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Read current RSSI value in Integer"
	::= { rssi 2 }

rfPll			OBJECT IDENTIFIER ::= { rf 10 }

rfRFMRFpll		OBJECT-TYPE
    	SYNTAX		INTEGER	{ NOLOCK(0), LOCK(1) } 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"RFM RX PLL lock status"
	::= { rfPll 1 }

rfRFMIFpll		OBJECT-TYPE
    	SYNTAX		INTEGER	{ NOLOCK(0), LOCK(1) } 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"RFM RX PLL lock status"
	::= { rfPll 2 }

rfTransmitPll		OBJECT-TYPE
    	SYNTAX		INTEGER	{ NOLOCK(0), LOCK(1) } 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Transmit PLL lock status"
	::= { rfPll 3 }

rfReceviedPll			OBJECT-TYPE
    	SYNTAX		INTEGER	{ NOLOCK(0), LOCK(1) } 
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Loopback PLL lock status"
	::= { rfPll 4 }

rfIn			OBJECT IDENTIFIER ::= { rf 11 }

rfInDataOctets		OBJECT-TYPE
    	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display total number of incoming Octets in FPGA"
	::= { rfIn 1 }

rfInDataPackets		OBJECT-TYPE
    	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display total number of incoming Packets in FPGA"
	::= { rfIn 2 }

rfInDropPackets	OBJECT-TYPE
    	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display total number of Ethernet drop packets goes in toFPGA"
	::= { rfIn 3 }

rfInPortUtil		OBJECT-TYPE
    	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display current in port utilizaition percentage" 
	::= { rfIn 4 }

rfInPortRate		OBJECT-TYPE
    	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display current in port rate" 
	::= { rfIn 5 }

rfOut			OBJECT IDENTIFIER ::= { rf 12 }

rfOutDataOctets		OBJECT-TYPE
    	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display total number of outgoing Octets in FPGA"
	::= { rfOut 1 }

rfOutDataPackets	OBJECT-TYPE
    	SYNTAX		Counter32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display total number of outgoing Packets in FPGA"
	::= { rfOut 2 }

rfOutPortUtil		OBJECT-TYPE
    	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display current out port utilizaition percentage" 
	::= { rfOut 3 }

rfOutPortRate		OBJECT-TYPE
    	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION	"Display current out port rate" 
	::= { rfOut 4 }

END