snmp_mib_archive/nwserver.cfg

#-MIBFILE: nwserver.mib

NetWare-Server-MIB DEFINITIONS ::= BEGIN


KBytes ::=
	INTEGER (0..2147483647)

ProductID ::=
	OBJECT IDENTIFIER

InternationalDisplayString ::=
	OCTET STRING

Seconds ::=
	INTEGER (0..2147483647)

IPXNetNumber ::=
	OCTET STRING (SIZE(4))

TransportDomain ::=
	INTEGER {
	noAddress(1),
	ipx(2),
	ip(3),
	appleTalkDDP(4)
	}

TransportAddress ::=
	OCTET STRING

EngineType ::=
	INTEGER {
	msEngine(1),
	ioEnginePrimary(2),
	ioEngineSecondary(3)
	}

DSTType ::=
	OCTET STRING (SIZE(7))

novell OBJECT IDENTIFIER ::= { enterprises 23 }

mibDoc OBJECT IDENTIFIER ::= { novell 2 }

nwServer OBJECT IDENTIFIER ::= { mibDoc 28 }

nwSystem OBJECT IDENTIFIER ::= { nwServer 1 }

nwFileSystem OBJECT IDENTIFIER ::= { nwServer 2 }

nwUsers OBJECT IDENTIFIER ::= { nwServer 3 }

nwQueue OBJECT IDENTIFIER ::= { nwServer 4 }

nwOdi OBJECT IDENTIFIER ::= { nwServer 5 }

nwSft3 OBJECT IDENTIFIER ::= { nwServer 6 }

nwNCP OBJECT IDENTIFIER ::= { nwServer 7 }

nwWatchdog OBJECT IDENTIFIER ::= { nwServer 8 }

nwNLM OBJECT IDENTIFIER ::= { nwServer 9 }

nwSetParams OBJECT IDENTIFIER ::= { nwServer 10 }

nwUserAccounts OBJECT IDENTIFIER ::= { nwServer 11 }

nwSysServerName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The physical name of this NetWare server."
	::= { nwSystem 1 }


nwSysSerialNumber OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The serial number of the instance of the NetWare
Operating System running on this server."
	::= { nwSystem 2 }


nwSysInternalNetNum OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(4))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The internal IPX network number of this server."
	::= { nwSystem 3 }


nwSysServerUpTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time (in hundredths of a second) since this server
was last restarted."
	::= { nwSystem 4 }


nwSysOSSFTLevel OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	sftI(2),
	sftII(3),
	sftIII(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The System Fault Tolerance Level of the NetWare
Operating System running on this server."
	::= { nwSystem 5 }


nwSysOSMajorVer OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The major version number of the NetWare Operating
System running on this server."
	::= { nwSystem 6 }


nwSysOSMinorVer OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The minor version number of the NetWare Operating
System running on this server."
	::= { nwSystem 7 }


nwSysOSReleaseDate OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The release date of the NetWare Operating System
running on this server."
	::= { nwSystem 8 }


nwSysOSDescription OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A textual description of the NetWare Operating System
running on this server."
	::= { nwSystem 9 }


nwSysOSCopyright OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The copyright string for the NetWare Operating System
running on this server."
	::= { nwSystem 10 }


nwSysTime OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date and time kept by this server."
	::= { nwSystem 11 }


nwSysTimeZone OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time zone in which this server resides.  The
string is in the same format as in the NetWare 'SET
TIMEZONE' command."
	::= { nwSystem 12 }


nwSysLoginState OBJECT-TYPE
	SYNTAX INTEGER {
	notApplicable(1),
	enabled(2),
	disabled(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current login state of this Server."
	::= { nwSystem 13 }


nwSysLanguageID OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	canadianFrench(2),
	chinese(3),
	danish(4),
	dutch(5),
	english(6),
	finnish(7),
	french(8),
	german(9),
	italian(10),
	japanese(11),
	portuguese(14),
	russian(15),
	spanish(16),
	swedish(17)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The national language in use on this server."
	::= { nwSystem 14 }


nwSysNMASerialNumber OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The serial number of the instance of the NetWare
Management Agent running on this server.

Or, a zero-length string if not applicable."
	::= { nwSystem 15 }


nwSysNMACopiesAllowed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of instances of the NMA with this
serial number allowed by the license agreement.  A
value of 0 implies no limit."
	::= { nwSystem 16 }


nwSysDirectoryTree OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the NetWare directory services tree
containing this server.

Or, a zero-length string if not applicable."
	::= { nwSystem 17 }


nwSysBinderyContext OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The container object(s) where the bindery services
context(s) is set.

Or, a zero-length string if not applicable."
	::= { nwSystem 18 }


nwSysServerDSName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Directory Services full distinguished name of this
NetWare server, or the zero-length string if not
applicable."
	::= { nwSystem 19 }


nwSysDaylightSavingsStart OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Start of daylight savings time. A language independent
representation of the local date and time when the
switch to Daylight Savings Time occurs on the server."
	::= { nwSystem 20 }


nwSysDaylightSavingsEnd OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(7))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "End of daylight savings time. A language independent
representation of the local date and time when the
switch from Daylight Savings Time occurs on the
server."
	::= { nwSystem 21 }


nwSysDaylightSavingsOffset OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The offset applied in time calculations when daylight
savings is in effect.  This is a signed quantity, and
the units are seconds."
	::= { nwSystem 22 }


nwSysDaylightSavingsStatus OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether daylight savings time is applicable
or not."
	::= { nwSystem 23 }


nwFSReads OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of file reads the file system has
made since this server was started. This value provides
a relative measure of server activity."
	::= { nwFileSystem 1 }


nwFSWrites OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of file writes the file system has
made since this server was started. This value provides
a relative measure of server activity."
	::= { nwFileSystem 2 }


nwFSReadKBytes OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of KBytes read by the file system.
This value provides a measure of server activity."
	::= { nwFileSystem 3 }


nwFSWrittenKBytes OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of KBytes written by the file system.
This value provides a measure of server activity."
	::= { nwFileSystem 4 }


nwFSCacheChecks OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of checks that have been made against
the file cache."
	::= { nwFileSystem 5 }


nwFSCacheHits OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of times a file cache check has
resulted in a hit."
	::= { nwFileSystem 6 }


nwFSOpenFiles OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of open files in the file system."
	::= { nwFileSystem 7 }


nwFSMaxOpenFiles OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of open files allowed in the file
system."
	::= { nwFileSystem 8 }


nwFSRecordLocks OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current number of record locks."
	::= { nwFileSystem 9 }


nwFSMaxRecordLocks OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of record locks allowed."
	::= { nwFileSystem 10 }


nwFSMaxSubdirectoryTreeDepth OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of levels of subdirectories the OS
supports."
	::= { nwFileSystem 11 }


nwFSMaxPercentOfVolumeUsedByDir OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The percentage of a volume that may be used as
directory space."
	::= { nwFileSystem 12 }


nwFSVolCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of volumes listed in the volume table"
	::= { nwFileSystem 13 }


nwFSVolTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwFSVolEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The volume table lists all the NetWare volumes,
whether mounted or not ( see nwVolMounted for more
details)."
	::= { nwFileSystem 14 }


nwFSVolEntry OBJECT-TYPE
	SYNTAX NwFSVolEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the volume table describing a single
NetWare Volume"
	INDEX { nwVolID  }

	::= { nwFSVolTable 1 }

nwFSVolEntry ::=
	SEQUENCE {
		nwVolID INTEGER,
		nwVolPhysicalName InternationalDisplayString,
		nwVolSize KBytes,
		nwVolFree KBytes,
		nwVolFreeable KBytes,
		nwVolNonFreeable KBytes,
		nwVolBlockSize INTEGER,
		nwVolMounted INTEGER,
		nwVolAttributes INTEGER,
		nwVolNameSpaces INTEGER,
		nwVolTotalDirEntries INTEGER,
		nwVolUsedDirEntries INTEGER,
		nwVolSegmentCount INTEGER,
		nwVolDSName InternationalDisplayString,
		nwVolFileSystemID INTEGER,
		nwVolFileSystemName InternationalDisplayString
		}

nwVolID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each NetWare volume on the server.
The value for each volume must remain constant at least
from one re-initialization of the agent to the next re-
initialization."
	::= { nwFSVolEntry 1 }


nwVolPhysicalName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the physical volume (as opposed to any
Directory Services (DS) name."
	::= { nwFSVolEntry 2 }


nwVolSize OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The size of the volume in KBytes."
	::= { nwFSVolEntry 3 }


nwVolFree OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The free space on the volume in KBytes.  As this
number approaches zero, the volume is running out of
space for new or expanding files."
	::= { nwFSVolEntry 4 }


nwVolFreeable OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The amount of freeable space (in KBytes) being used by
previously deleted files on this volume. The freeable
space can be reclaimed as free space by purging deleted
files."
	::= { nwFSVolEntry 5 }


nwVolNonFreeable OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The non-freeable space (in KBytes) on the volume.
This is the space being used by deleted files that
cannot be purged.  Non-freeable space can be reclaimed
as free space when the deleted files become eligible to
be purged."
	::= { nwFSVolEntry 6 }


nwVolBlockSize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The block size on the volume in bytes."
	::= { nwFSVolEntry 7 }


nwVolMounted OBJECT-TYPE
	SYNTAX INTEGER {
	mounted(1),
	dismounted(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The mount state of the volume.  Note that if the
volume is not mounted, all the other values in the
table, except nwVolName, are invalid.

Writing a value of mounted(1) to this object will cause
the volume to be mounted if it is currently dismounted.

Writing a value of dismounted(2) to this object will
cause the volume to be dismounted if the volume is
currently mounted."
	::= { nwFSVolEntry 8 }


nwVolAttributes OBJECT-TYPE
	SYNTAX INTEGER (0..31)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A value that represents the attributes of the volume.

The value is a sum.  This value initially takes the
value zero, then for each attribute that is enabled on
the volume, 2 raised to a power is added to the sum.
The powers are according to the following table:

Attribute           Power
Block Suballocation 0
File Compression    1
Data Migration      2
Auditing            3
Read Only           4

For example, a read-only volume with suballocation
enabled would have a value of 17 (2**4 + 2**0)."
	::= { nwFSVolEntry 9 }


nwVolNameSpaces OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A value representing all the name spaces supported by
this volume.

The value is a sum.  This value initially takes the
value zero, then for each name space that is supported
by the volume, 2 raised to a power is added to the sum.
The powers are according to the following table:

Name Space     Power
DOS            0
MAC            1
NFS            2
FTAM           3
OS/2           4
NT             5

For example, a volume supporting both the DOS and MAC
name spaces would have a value of 3 (2**0 + 2**1)."
	::= { nwFSVolEntry 10 }


nwVolTotalDirEntries OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of directory table entries available
on this volume."
	::= { nwFSVolEntry 11 }


nwVolUsedDirEntries OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of directory table entries that are
currently being used on this volume."
	::= { nwFSVolEntry 12 }


nwVolSegmentCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of segments comprising this volume."
	::= { nwFSVolEntry 13 }


nwVolDSName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The full Directory Services  distinguished name for
the volume, or the zero-length string if not
applicable."
	::= { nwFSVolEntry 14 }


nwVolFileSystemID OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	unknown(2),
	netWareVolume(3),
	nfsVolume(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of the file system on the volume."
	::= { nwFSVolEntry 15 }


nwVolFileSystemName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If remote, the remote mount point; e.g. va:/usr/x
If local, the zero length string."
	::= { nwFSVolEntry 16 }


nwFSOpenFileTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwFSOpenFileEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of all open files on the server.  If a file is
opened by more than one connection, multiple entries
for the same file will appear in the table."
	::= { nwFileSystem 15 }


nwFSOpenFileEntry OBJECT-TYPE
	SYNTAX NwFSOpenFileEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the Open File table providing information
about a single open file."
	INDEX { nwOfileVolID , nwOfileDirectoryNumber, nwOfileConnection }

	::= { nwFSOpenFileTable 1 }

nwFSOpenFileEntry ::=
	SEQUENCE {
		nwOfileVolID INTEGER,
		nwOfileDirectoryNumber INTEGER,
		nwOfileConnection INTEGER,
		nwOfileVolumeName InternationalDisplayString,
		nwOfileName InternationalDisplayString,
		nwOfileLoginName InternationalDisplayString
		}

nwOfileVolID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a NetWare volume.
The value of this object for a particular volume has
the same value as the nwVolID object for the same
volume."
	::= { nwFSOpenFileEntry 1 }


nwOfileDirectoryNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies an open file within
a NetWare volume."
	::= { nwFSOpenFileEntry 2 }


nwOfileConnection OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of the connection that opened the file."
	::= { nwFSOpenFileEntry 3 }


nwOfileVolumeName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The physical name of the NetWare volume containing the
open file."
	::= { nwFSOpenFileEntry 4 }


nwOfileName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the open file including the directory
path."
	::= { nwFSOpenFileEntry 5 }


nwOfileLoginName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the user (if any) who opened the file.  If
the file was opened by the system or by an NLM, etc.,
nwOfileLoginName will be the zero-length string."
	::= { nwFSOpenFileEntry 6 }


nwUserCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of entries in the User Account Table."
	::= { nwUsers 1 }


nwLoginCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of licensed connections (logins) in this
file server."
	::= { nwUsers 2 }


nwMaxLogins OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of licensed connections (logins)
supported by this file server.  Zero if unlimited."
	::= { nwUsers 3 }


nwConnectionCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of entries in the Connection Table.  The
current number of connections to this file
server(including connection 0 (zero), the system
connection)."
	::= { nwUsers 4 }


nwPeakRemoteConnections OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The peak number of remote stations that have
simultaneously connected to this server.  Note that
this number does not include connections made by the
server itself, nor NLMs running on the server."
	::= { nwUsers 5 }


nwMaxConnections OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of connections supported by this
file server.  Zero if unlimited."
	::= { nwUsers 6 }


nwNLMConnections OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current number of logged in connections used by
the system."
	::= { nwUsers 7 }


nwConnectionTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwConnectionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Connection Table lists all connections used;
including those by Workstations, NLMs, and Attachments.
Connection 0 (zero) is used by the system."
	::= { nwUsers 8 }


nwConnectionEntry OBJECT-TYPE
	SYNTAX NwConnectionEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the connections table provides information
about a single connection"
	INDEX { nwConnectionNumber  }

	::= { nwConnectionTable 1 }

nwConnectionEntry ::=
	SEQUENCE {
		nwConnectionNumber INTEGER,
		nwConnectionLoginName InternationalDisplayString,
		nwConnectionTransportDomain TransportDomain,
		nwConnectionTransportAddress TransportAddress,
		nwConnectionTime DateAndTime,
		nwConnectionReadKBytes Counter,
		nwConnectionWrittenKBytes Counter,
		nwConnectionNcpRequests Counter,
		nwConnectionFilesOpen INTEGER,
		nwConnectionRecordsLocked INTEGER,
		nwConnectionPrivilege INTEGER,
		nwConnectionStatus INTEGER
		}

nwConnectionNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The connection number.  Connection 0 (zero) is used by
the system."
	::= { nwConnectionEntry 1 }


nwConnectionLoginName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The login name (Directory Services full distinguished
name where appropriate).  Zero-length string if not
applicable."
	::= { nwConnectionEntry 2 }


nwConnectionTransportDomain OBJECT-TYPE
	SYNTAX INTEGER {
	noAddress(1),
	ipx(2),
	ip(3),
	appleTalkDDP(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " The transport domain of the connection."
	::= { nwConnectionEntry 3 }


nwConnectionTransportAddress OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " The transport address of the connection."
	::= { nwConnectionEntry 4 }


nwConnectionTime OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date and time the connection was established."
	::= { nwConnectionEntry 5 }


nwConnectionReadKBytes OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of KBytes the connection has read since it
was established."
	::= { nwConnectionEntry 6 }


nwConnectionWrittenKBytes OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of KBytes the connection has written since
it was established."
	::= { nwConnectionEntry 7 }


nwConnectionNcpRequests OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of NCP Requests the connection has made
since it was established."
	::= { nwConnectionEntry 8 }


nwConnectionFilesOpen OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of files that are currently opened by the
connection."
	::= { nwConnectionEntry 9 }


nwConnectionRecordsLocked OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of file records that are currently locked
by the connection."
	::= { nwConnectionEntry 10 }


nwConnectionPrivilege OBJECT-TYPE
	SYNTAX INTEGER (0..63)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A value that represents the connection's login
privileges.

The value is a sum.  This value initially takes the
value zero, then for each privilege that the connection
has, 2 raised to a power is added to the sum.  The
powers are according to the following table:

Privilege                Power
Supervisor               0
Operator                 1
Auditor                  2
High_Privilege           3
Second_Authentication    4
Second_High_Privilege    5

For example, a user with both Supervisor and Auditor
privileges would have a value of 5 (2**0 + 2**2) "
	::= { nwConnectionEntry 11 }


nwConnectionStatus OBJECT-TYPE
	SYNTAX INTEGER (0..1023)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A value that represents the login status of the user.

The value is a sum.  This value initially takes the
value zero, then for each status that the user has, 2
raised to a power is added to the sum.  The powers are
according to the following table:

Status                        Power
Not logged in                 0
Logged in                     1
Need security change          2
MacStation                    3
Connection abort              4
Audited                       5
Authenticated temporary       6
Audit connection recorded     7
DS audit connection recorded  8
Logout in progress            9

For example a logged in user who needs a security
change would have a value of 6 (2**1 + 2**2)."
	::= { nwConnectionEntry 12 }


nwQueueCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of active queues on this server."
	::= { nwQueue 1 }


nwQueueTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwQueueEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Queue table lists all the active NetWare queues
including: print, job and archive queues on this
server. "
	::= { nwQueue 2 }


nwQueueEntry OBJECT-TYPE
	SYNTAX NwQueueEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the Queue table provides information about
a single NetWare queue."
	INDEX { nwQID  }

	::= { nwQueueTable 1 }

nwQueueEntry ::=
	SEQUENCE {
		nwQID INTEGER,
		nwQName InternationalDisplayString,
		nwQType INTEGER,
		nwQAddJobState INTEGER,
		nwQAttachState INTEGER,
		nwQServiceJobState INTEGER,
		nwQDirVolName InternationalDisplayString,
		nwQNumJobEntries INTEGER,
		nwQNumAssignedServers INTEGER
		}

nwQID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each NetWare queue on the server.
The value for each queue must remain constant at least
from one re-initialization of the agent to the next re-
initialization."
	::= { nwQueueEntry 1 }


nwQName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The queue name (Directory Services full distinguished
name where appropriate).  Zero-length string if not
applicable."
	::= { nwQueueEntry 2 }


nwQType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	printQueue(2),
	archiveQueue(3),
	jobQueue(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of the queue."
	::= { nwQueueEntry 3 }


nwQAddJobState OBJECT-TYPE
	SYNTAX INTEGER {
	canAddJobs(1),
	cannotAddJobs(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This value indicates whether more jobs can be added to
this queue.  A value of canAddJobs(1) indicates more
jobs can be added.  A value of cannotAddJobs(2)
indicates more jobs cannot be added."
	::= { nwQueueEntry 4 }


nwQAttachState OBJECT-TYPE
	SYNTAX INTEGER {
	canAttach(1),
	cannotAttach(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This value indicates whether queue servers can attach
to this queue. A value of canAttach(1) indicates a
queue server can attach.  A value of cannotAttach(2)
indicates a queue server cannot attach."
	::= { nwQueueEntry 5 }


nwQServiceJobState OBJECT-TYPE
	SYNTAX INTEGER {
	canService(1),
	cannotService(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This value indicates whether the queue can service
jobs.  A value of canService(1) indicates that the
queue can service jobs.  A value of cannotService(2)
indicates the queue cannot service jobs."
	::= { nwQueueEntry 6 }


nwQDirVolName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The physical name of the volume, where the directory
created for this queue resides."
	::= { nwQueueEntry 7 }


nwQNumJobEntries OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of job entries in the queue."
	::= { nwQueueEntry 8 }


nwQNumAssignedServers OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of servers assigned to the queue."
	::= { nwQueueEntry 9 }


nwQueueJobTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwQueueJobEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Queue Job table lists all the jobs for all the
active queues defined on this server

QMS creates a file for each job. The name of that file
will be Q$XXXX.NNN where XXXX is the last 4 digits of
nwQJobQID and NNN is the job number.  Therefore the Q
Job File name can be calculated and will not be in the
table."
	::= { nwQueue 3 }


nwQueueJobEntry OBJECT-TYPE
	SYNTAX NwQueueJobEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the Queue Job table provides information
about a particular job in a particular queue."
	INDEX { nwQJobQID , nwQJobNumber }

	::= { nwQueueJobTable 1 }

nwQueueJobEntry ::=
	SEQUENCE {
		nwQJobQID INTEGER,
		nwQJobNumber INTEGER,
		nwQJobDescription InternationalDisplayString,
		nwQJobEntryDateTime DateAndTime,
		nwQJobPosition INTEGER,
		nwQJobSize INTEGER,
		nwQJobControlFlags INTEGER,
		nwQJobUserName InternationalDisplayString,
		nwQJobTargetServerName InternationalDisplayString,
		nwQJobTargetDateTime DateAndTime,
		nwQJobServerName InternationalDisplayString
		}

nwQJobQID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a NetWare queue.
The value of this object for a particular queue has the
same value as the nwQID object for the same queue."
	::= { nwQueueJobEntry 1 }


nwQJobNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The job number."
	::= { nwQueueJobEntry 2 }


nwQJobDescription OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The description of the queue job."
	::= { nwQueueJobEntry 3 }


nwQJobEntryDateTime OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The entry date and time."
	::= { nwQueueJobEntry 4 }


nwQJobPosition OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The order in the queue."
	::= { nwQueueJobEntry 5 }


nwQJobSize OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The size of the job file in bytes."
	::= { nwQueueJobEntry 6 }


nwQJobControlFlags OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A value representing the job control flags.

The value is a sum.  This value initially takes the
value zero, then for each job control flag that is set,
2 raised to a power is added to the sum.  The powers
are according to the following table:

8h Service Auto-Start
10h Execute
20h Entry Open
40h User Hold
80h Operator Hold"
	::= { nwQueueJobEntry 7 }


nwQJobUserName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the user who submitted the job (Directory
Services full distinguished name where appropriate).
Zero-length string if not applicable."
	::= { nwQueueJobEntry 8 }


nwQJobTargetServerName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The target server name (Directory Services full
distinguished name where appropriate)..  The zero
length string will be returned for 'Any Server'."
	::= { nwQueueJobEntry 9 }


nwQJobTargetDateTime OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The target date and time. When the job is to be
printed.  A job may be first in queue but may not print
because this is set to some other time."
	::= { nwQueueJobEntry 10 }


nwQJobServerName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The server currently processing the job (Directory
Services full distinguished name where appropriate)..
If the job is not being handled currently, this field
will be a zero-length string."
	::= { nwQueueJobEntry 11 }


nwQueueServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwQueueServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Queue Server Table lists all the assigned servers
for all the active NetWare queues on this instrumented
server.  For each active queue on the server, zero or
more entries will exist, one for each server assigned
to service that particular queue."
	::= { nwQueue 4 }


nwQueueServerEntry OBJECT-TYPE
	SYNTAX NwQueueServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the Queue Server table provides
information about the assignment of a particular server
to a particular queue."
	INDEX { nwQServerQID , nwQServerID }

	::= { nwQueueServerTable 1 }

nwQueueServerEntry ::=
	SEQUENCE {
		nwQServerQID INTEGER,
		nwQServerID INTEGER,
		nwQServerName InternationalDisplayString,
		nwQServerStatus INTEGER
		}

nwQServerQID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a NetWare queue.
The value of this object for a particular queue has the
same value as the nwQID object for the same queue."
	::= { nwQueueServerEntry 1 }


nwQServerID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each server servicing this queue.
The value for each server must remain constant at least
from one re-initialization of the agent to the next re-
initialization."
	::= { nwQueueServerEntry 2 }


nwQServerName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of a queue server servicing this queue
(Directory Services full distinguished name where
appropriate).  Zero-length string if not applicable.."
	::= { nwQueueServerEntry 3 }


nwQServerStatus OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	active(2),
	inactive(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of the Queue Server."
	::= { nwQueueServerEntry 4 }


nwOdiLslEnqSendCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Link Support Layer's Enqueued Send Count, this is
the current number of send packets that have been
placed in a send queue."
	::= { nwOdi 1 }


nwOdiOsPktRcvBuffer OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current number of packet receive buffers being
used by the operating system."
	::= { nwOdi 2 }


nwOdiOsMaxPktRcvBuffers OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of packet receive buffers that the
operating system can allocate. This object is settable
and can also be set through the nwSetParamTable."
	::= { nwOdi 3 }


nwOdiOsMinPktRcvBuffers OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The minimum number of packet receive buffers that the
operating system can allocate.  This value can only be
changed at startup time from STARTUP.NCF; therefore it
is settable only through the nwSetParamTable."
	::= { nwOdi 4 }


nwSft3Engine OBJECT-TYPE
	SYNTAX INTEGER {
	msEngine(1),
	ioEnginePrimary(2),
	ioEngineSecondary(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of the this engine."
	::= { nwSft3 1 }


nwSft3EngineState OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	synchronizing(2),
	mirrored(3),
	noSecondary(4),
	down(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The state of this engine.  Note the msEngine does not
know its state and thus will always be unknown(1)."
	::= { nwSft3 2 }


nwSft3EngineTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwSft3EngineEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information about each engine which comprises an SFT-
III server."
	::= { nwSft3 3 }


nwSft3EngineEntry OBJECT-TYPE
	SYNTAX NwSft3EngineEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information about a particular engine in an SFT-III
server."
	INDEX { nwSft3EngineType  }

	::= { nwSft3EngineTable 1 }

nwSft3EngineEntry ::=
	SEQUENCE {
		nwSft3EngineType EngineType,
		nwSft3EngineName InternationalDisplayString,
		nwSft3EngineInternalNetNum IPXNetNumber
		}

nwSft3EngineType OBJECT-TYPE
	SYNTAX INTEGER {
	msEngine(1),
	ioEnginePrimary(2),
	ioEngineSecondary(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of the engine."
	::= { nwSft3EngineEntry 1 }


nwSft3EngineName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of this engine."
	::= { nwSft3EngineEntry 2 }


nwSft3EngineInternalNetNum OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(4))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The internal IPX network number of this server."
	::= { nwSft3EngineEntry 3 }


nwNCPIPXChecksums OBJECT-TYPE
	SYNTAX INTEGER {
	noChecksums(1),
	checksumIfEnabledAtClient(2),
	requireChecksums(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Controls NCP IPX checksumming."
	::= { nwNCP 1 }


nwNCPPacketSignatures OBJECT-TYPE
	SYNTAX INTEGER {
	serverNeverSigns(1),
	serverSignsOnClientRequest(2),
	serverSignsIfClientCapable(3),
	serverMandatesSigning(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The security level currently in force on this server."
	::= { nwNCP 2 }


nwNCPNumNCPReqs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of NCP Requests."
	::= { nwNCP 3 }


nwNCPUseCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "NCP station in use count."
	::= { nwNCP 4 }


nwNCPPeakUseCount OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "NCP peak station in use count."
	::= { nwNCP 5 }


nwNCPForgedPkts OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The count of NCP requests that were forged packets."
	::= { nwNCP 6 }


nwNCPBeingProcesseds OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The count of NCP requests that were already being
processed."
	::= { nwNCP 7 }


nwNCPNoAvailConns OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The count of NCP requests that were not processed
because there were no available connections."
	::= { nwNCP 8 }


nwNCPIPXChecksumErrs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "NCP IPX checksum error count."
	::= { nwNCP 9 }


nwNCPInvalidPacketSigs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "NCP invalid packet signature error count."
	::= { nwNCP 10 }


nwNCPExtNumReg OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of NCP extensions Registered."
	::= { nwNCP 11 }


nwNCPExtInvalidReqs OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Invalid NCP Extensions Requests."
	::= { nwNCP 12 }


nwWDTimeBeforeFirstPkt OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time before the first Watchdog Packet in seconds."
	::= { nwWatchdog 1 }


nwWDTimeBetweenPkts OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time between Watchdog Packets in seconds."
	::= { nwWatchdog 2 }


nwWDNumPktsToSend OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of Watchdog Packets to Send."
	::= { nwWatchdog 3 }


nwWDCurrentState OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	waiting(2),
	sendingPackets(3),
	clearingStations(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current Watchdog State.
Note: this is only available in 4.0, will be unknown in
3.11"
	::= { nwWatchdog 4 }


nwWDNotifyConsoleFlag OBJECT-TYPE
	SYNTAX INTEGER {
	doNotNotify(1),
	notify(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Watchdog Notify Console Flag."
	::= { nwWatchdog 5 }


nwNLMTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwNLMEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The nwNLMTable augments the hrSWRunTable in the Host
Resources MIB to provide additional NetWare specific
information."
	::= { nwNLM 1 }


nwNLMEntry OBJECT-TYPE
	SYNTAX NwNLMEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the NLM table provides additional
information about a particular NLM."
	INDEX { nwNLMIndex  }

	::= { nwNLMTable 1 }

nwNLMEntry ::=
	SEQUENCE {
		nwNLMIndex INTEGER,
		nwNLMName InternationalDisplayString,
		nwNLMDescription InternationalDisplayString,
		nwNLMTotalMemory INTEGER,
		nwNLMCopyright InternationalDisplayString,
		nwNLMProtectionDomain INTEGER,
		nwNLMMajorVer INTEGER,
		nwNLMMinorVer INTEGER,
		nwNLMRevision INTEGER,
		nwNLMReleaseDate DateAndTime
		}

nwNLMIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies an NLM.  The value
of this object for a particular NLM has the same value
as the hrSWRunIndex object, defined in the HOST-
RESOURCES-MIB, for the same NLM."
	::= { nwNLMEntry 1 }


nwNLMName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the NLM."
	::= { nwNLMEntry 2 }


nwNLMDescription OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A text string that describes this NLM."
	::= { nwNLMEntry 3 }


nwNLMTotalMemory OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total memory, in bytes, used by this NLM.  This is
a composite total of Short Term Memory, Semi-Permanent
Memory, and Non-movable Cache Memory allocated by the
NLM, plus the sizes of the code and data sections of
this instance of an NLM."
	::= { nwNLMEntry 4 }


nwNLMCopyright OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The copyright string for this NLM."
	::= { nwNLMEntry 5 }


nwNLMProtectionDomain OBJECT-TYPE
	SYNTAX INTEGER {
	osDomain(1),
	protectedDomain(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The protection level at which this NLM is executing."
	::= { nwNLMEntry 6 }


nwNLMMajorVer OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The major version number of this NLM."
	::= { nwNLMEntry 7 }


nwNLMMinorVer OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The minor version number of this NLM."
	::= { nwNLMEntry 8 }


nwNLMRevision OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The revision level of this NLM."
	::= { nwNLMEntry 9 }


nwNLMReleaseDate OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The date and time this NLM was released"
	::= { nwNLMEntry 10 }


nwSetCategoryTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwSetCategoryEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of NetWare SET parameter categories"
	::= { nwSetParams 1 }


nwSetCategoryEntry OBJECT-TYPE
	SYNTAX NwSetCategoryEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A NetWare SET parameter category"
	INDEX { nwSetCategoryIndex  }

	::= { nwSetCategoryTable 1 }

nwSetCategoryEntry ::=
	SEQUENCE {
		nwSetCategoryIndex INTEGER,
		nwSetCategoryName InternationalDisplayString
		}

nwSetCategoryIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each category of SET commands"
	::= { nwSetCategoryEntry 1 }


nwSetCategoryName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A descriptive name of this category of SET commands"
	::= { nwSetCategoryEntry 2 }


nwSetParamTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwSetParamEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of the NetWare SET parameters.  This table
emulates the NetWare SET command.

Note that some of the parameters can also be set
through other MIB objects"
	::= { nwSetParams 2 }


nwSetParamEntry OBJECT-TYPE
	SYNTAX NwSetParamEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the SET parameter table provides
information about a particular parameter."
	INDEX { nwSetParamCategoryIndex , nwSetParamIndex }

	::= { nwSetParamTable 1 }

nwSetParamEntry ::=
	SEQUENCE {
		nwSetParamCategoryIndex INTEGER,
		nwSetParamIndex INTEGER,
		nwSetParamName InternationalDisplayString,
		nwSetParamType INTEGER,
		nwSetParamValueInteger INTEGER,
		nwSetParamValueString InternationalDisplayString,
		nwSetParamLowerLimit INTEGER,
		nwSetParamUpperLimit INTEGER,
		nwSetParamDescrLength INTEGER,
		nwSetParamMode INTEGER
		}

nwSetParamCategoryIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a Set parameter
category.  The value of this object for a particular
category has the same value as the nwSetCategoryIndex
object for the same category."
	::= { nwSetParamEntry 1 }


nwSetParamIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index which uniquely identifies this set parameter
within the category"
	::= { nwSetParamEntry 2 }


nwSetParamName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the settable parameter"
	::= { nwSetParamEntry 3 }


nwSetParamType OBJECT-TYPE
	SYNTAX INTEGER {
	number(1),
	boolean(2),
	ticks(3),
	blockShift(4),
	timeOffset(5),
	string(6),
	trigger(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of the parameter.  All types are integer-
valued except 'string', which is string-valued.

number:     integer
boolean:    0 == FALSE, non-zero == TRUE
ticks:      1 tick == 3600/65535 == approx 55 millisecs
blockShift: integer
timeOffset: [+|-]hh:mm:ss converted to seconds
string:     character string
trigger:    integer"
	::= { nwSetParamEntry 4 }


nwSetParamValueInteger OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current value of the parameter if integer-valued.
Zero otherwise."
	::= { nwSetParamEntry 5 }


nwSetParamValueString OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current value of the parameter if string-valued.
The zero-length string otherwise."
	::= { nwSetParamEntry 6 }


nwSetParamLowerLimit OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The lower limit of the parameter if integer-valued."
	::= { nwSetParamEntry 7 }


nwSetParamUpperLimit OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper limit of the parameter if integer-valued.
The maximum length of the string if string-valued."
	::= { nwSetParamEntry 8 }


nwSetParamDescrLength OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total length (in octets) of the parameter
description string, which can be retrieved in segments
from the nwSetDescrTable."
	::= { nwSetParamEntry 9 }


nwSetParamMode OBJECT-TYPE
	SYNTAX INTEGER (0..7)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A value defining how and when the command takes
effect.

The value is a sum.  This value initially takes the
value zero, then for each place the parameter can be
set from, 2 raised to a power is added to the sum.  The
powers are according to the following table:

Set From       Power
Console        0
AUTOEXEC.NCF   1
STARTUP.NCF    2

For example, a parameter that can be set from either
the console or AUTOEXEC would have a value of 3 (2**0 +
2**1).

On a read, a bit will be set for each place the
parameter can be set from.  On a write, bits should be
set to specify where the set command should be placed.
If nwSetParamValue is written without nwSetParam also
being set in the same PDU, the parameter will be set as
if at the console; unless it is a parameter which can
only be set in STARTUP.NCF in which case an error will
be returned"
	::= { nwSetParamEntry 10 }


nwSetDescrTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwSetDescrEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table of description string segments for each
NetWare SET parameter.  This table allows for long
description strings to be retrieved in segments.

A complete description string can be reconstituted by
concatenating the ordered set of string segments.  The
length of the complete string is available through the
nwSetParamTable."
	::= { nwSetParams 3 }


nwSetDescrEntry OBJECT-TYPE
	SYNTAX NwSetDescrEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the SET description table contains one
segment of a NetWare SET parameter description string.

The complete description string can be reconstituted by
concatenating the ordered set of string segments.  The
length of the complete string is available through the
nwSetParamTable."
	INDEX { nwSetDescrCategoryIndex , nwSetDescrParamIndex, nwSetDescrIndex }

	::= { nwSetDescrTable 1 }

nwSetDescrEntry ::=
	SEQUENCE {
		nwSetDescrCategoryIndex INTEGER,
		nwSetDescrParamIndex INTEGER,
		nwSetDescrIndex INTEGER,
		nwSetDescription InternationalDisplayString
		}

nwSetDescrCategoryIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a Set parameter
category.  The value of this object for a particular
category has the same value as the nwSetCategoryIndex
object for the same category."
	::= { nwSetDescrEntry 1 }


nwSetDescrParamIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a Set parameter.
The value of this object for a particular parameter has
the same value as the nwSetParamIndex object for the
same parameter."
	::= { nwSetDescrEntry 2 }


nwSetDescrIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An ordinal that indicates this segment's relative
position in the complete description string for this
NetWare SET Parameter."
	::= { nwSetDescrEntry 3 }


nwSetDescription OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A segment of the description string for this NetWare
SET parameter."
	::= { nwSetDescrEntry 4 }


nwUserAcctTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwUserAcctEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The User Account Table lists all user accounts in this
file server.  Users in the table may or may not be
logged in currently.

The information in this table is applicable only to
NetWare 3.11 and 3.12 servers, or NetWare 4.10 servers
with Bindery Services enabled.  In the case of Bindery
Services, data is only available for those users in
the Bindery context(s) of the server.

In a 4.10 server without Bindery Services enabled, this
table will be empty "
	::= { nwUserAccounts 1 }


nwUserAcctEntry OBJECT-TYPE
	SYNTAX NwUserAcctEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the User Account table provides
information on a single user account.

The information in this table is applicable only to
NetWare 3.11 and 3.12 servers, or NetWare 4.10 servers
with Bindery Services enabled.  In the case of Bindery
Services, data is only available for those users in
the Bindery context(s) of the server.

In a 4.x server without Bindery Services enabled, this
table will be empty "
	INDEX { nwUserID  }

	::= { nwUserAcctTable 1 }

nwUserAcctEntry ::=
	SEQUENCE {
		nwUserID INTEGER,
		nwUserName InternationalDisplayString,
		nwUserDiskUsage KBytes,
		nwUserLastLoginTime DateAndTime,
		nwUserAccountStatus INTEGER,
		nwUserPasswordStatus INTEGER,
		nwUserBadLoginTransport TransportDomain,
		nwUserBadLoginAddress TransportAddress,
		nwUserBadLoginAttempts INTEGER,
		nwUserFullName InternationalDisplayString
		}

nwUserID OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each NetWare user with an account
on the server.  The value for each user must remain
constant at least from one re-initialization of the
agent to the next re-initialization."
	::= { nwUserAcctEntry 1 }


nwUserName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The user's login name (Directory Services full
distinguished name where appropriate).  Zero-length
string if not applicable."
	::= { nwUserAcctEntry 2 }


nwUserDiskUsage OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The amount of disk space, in KBytes, this user is
occupying across all volumes on this server."
	::= { nwUserAcctEntry 3 }


nwUserLastLoginTime OBJECT-TYPE
	SYNTAX DateAndTime
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time the user last logged in to this server."
	::= { nwUserAcctEntry 4 }


nwUserAccountStatus OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	expired(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of this user's account"
	::= { nwUserAcctEntry 5 }


nwUserPasswordStatus OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	expired(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of this user's password."
	::= { nwUserAcctEntry 6 }


nwUserBadLoginTransport OBJECT-TYPE
	SYNTAX INTEGER {
	noAddress(1),
	ipx(2),
	ip(3),
	appleTalkDDP(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The transport domain (protocol) the user used to log
in with bad password last time, valid only if the
variable nwUserBadLoginAttempt is larger than zero."
	::= { nwUserAcctEntry 7 }


nwUserBadLoginAddress OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " The address the user used to log in with bad password
last time, valid only if the variable
nwUserBadLoginAttempt is larger than zero."
	::= { nwUserAcctEntry 8 }


nwUserBadLoginAttempts OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of times the user attempted to log in with
a bad password since the server started. The number
would be 0xFFFF if the number of bad login attempts has
exceeded the bad login threshold and the account has
been locked."
	::= { nwUserAcctEntry 9 }


nwUserFullName OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The user's full name."
	::= { nwUserAcctEntry 10 }


nwUserVolUsageTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwUserVolUsageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The User Volume Usage Table lists the amount of volume
space used by each user.  It is indexed so you can
easily find out how much space a particular user is
using on each volume."
	::= { nwUserAccounts 2 }


nwUserVolUsageEntry OBJECT-TYPE
	SYNTAX NwUserVolUsageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the User Volume Usage table provides
information about the amount of space a particular user
is using on a particular volume."
	INDEX { nwUserVolUserID , nwUserVolVolID }

	::= { nwUserVolUsageTable 1 }

nwUserVolUsageEntry ::=
	SEQUENCE {
		nwUserVolUserID INTEGER,
		nwUserVolVolID INTEGER,
		nwUserVolUsageUser InternationalDisplayString,
		nwUserVolUsageVolume InternationalDisplayString,
		nwUserVolUsageSpaceUsed KBytes,
		nwUserVolUsageLimit KBytes
		}

nwUserVolUserID OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a user.  The value
of this object for a particular user has the same value
as the nwUserID object for the same user."
	::= { nwUserVolUsageEntry 1 }


nwUserVolVolID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a NetWare volume.
The value of this object for a particular volume has
the same value as the nwVolID object for the same
volume."
	::= { nwUserVolUsageEntry 2 }


nwUserVolUsageUser OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The user's login name (Directory Services full
distinguished name where appropriate).  Zero-length
string if not applicable."
	::= { nwUserVolUsageEntry 3 }


nwUserVolUsageVolume OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " The physical volume name."
	::= { nwUserVolUsageEntry 4 }


nwUserVolUsageSpaceUsed OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " The amount of volume space, in KBytes, this user is
occupying."
	::= { nwUserVolUsageEntry 5 }


nwUserVolUsageLimit OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " The amount of volume space, in KBytes,
to which this user is limited.  2147483647 if no
limit."
	::= { nwUserVolUsageEntry 6 }


nwVolUsageTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NwVolUsageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Volume Usage Table lists the amount of space on
each volume used by each user.  It is indexed so that
you can easily find all the users who are occupying
space on a particular volume."
	::= { nwUserAccounts 3 }


nwVolUsageEntry OBJECT-TYPE
	SYNTAX NwVolUsageEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the Volume Usage Table provides
information about how much space a particular user is
using on a particular volume."
	INDEX { nwVolUsageVolID , nwVolUsageUserID }

	::= { nwVolUsageTable 1 }

nwVolUsageEntry ::=
	SEQUENCE {
		nwVolUsageVolID INTEGER,
		nwVolUsageUserID INTEGER,
		nwVolUsageVolume InternationalDisplayString,
		nwVolUsageUser InternationalDisplayString,
		nwVolUsageSpaceUsed KBytes,
		nwVolUsageLimit KBytes
		}

nwVolUsageVolID OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a NetWare volume.
The value of this object for a particular volume has
the same value as the nwVolID object for the same
volume."
	::= { nwVolUsageEntry 1 }


nwVolUsageUserID OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A number that uniquely identifies a user.  The value
of this object for a particular user has the same value
as the nwUserID object for the same user."
	::= { nwVolUsageEntry 2 }


nwVolUsageVolume OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The volume name."
	::= { nwVolUsageEntry 3 }


nwVolUsageUser OBJECT-TYPE
	SYNTAX InternationalDisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The user name."
	::= { nwVolUsageEntry 4 }


nwVolUsageSpaceUsed OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The volume space, in KBytes, in use by user."
	::= { nwVolUsageEntry 5 }


nwVolUsageLimit OBJECT-TYPE
	SYNTAX KBytes
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION " The amount of volume space, in KBytes,
to which this user is limited.  2147483647 if no
limit."
	::= { nwVolUsageEntry 6 }


END