snmp_mib_archive/cisco-stack-mib.cfg

#-MIBFILE: cisco-stack-mib.mib

CISCO-STACK-MIB DEFINITIONS ::= BEGIN


DisplayString ::=
	OCTET STRING (SIZE(0..255))

PhysAddress ::=
	OCTET STRING

MacAddress ::=
	OCTET STRING (SIZE(6))

TruthValue ::=
	INTEGER {
	true(1),
	false(2)
	}

TestAndIncr ::=
	INTEGER (0..2147483647)

AutonomousType ::=
	OBJECT IDENTIFIER

InstancePointer ::=
	OBJECT IDENTIFIER

VariablePointer ::=
	OBJECT IDENTIFIER

RowPointer ::=
	OBJECT IDENTIFIER

RowStatus ::=
	INTEGER {
	active(1),
	notInService(2),
	notReady(3),
	createAndGo(4),
	createAndWait(5),
	destroy(6)
	}

TimeStamp ::=
	TimeTicks

TimeInterval ::=
	INTEGER (0..2147483647)

DateAndTime ::=
	OCTET STRING (SIZE(8|11))

StorageType ::=
	INTEGER {
	other(1),
	volatile(2),
	nonVolatile(3),
	permanent(4),
	readOnly(5)
	}

TDomain ::=
	OBJECT IDENTIFIER

TAddress ::=
	OCTET STRING (SIZE(1..255))

FddiTimeNano ::=
	INTEGER (0..2147483647)

FddiTimeMilli ::=
	INTEGER (0..2147483647)

FddiResourceId ::=
	INTEGER (0..65535)

FddiSMTStationIdType ::=
	OCTET STRING (SIZE(8))

FddiMACLongAddressType ::=
	OCTET STRING (SIZE(6))

mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }
transmission OBJECT IDENTIFIER ::= { mib-2 10 }
fddi OBJECT IDENTIFIER ::= { transmission 15 }
fddimib OBJECT IDENTIFIER ::= { fddi 73 }
fddimibPORT OBJECT IDENTIFIER ::= { fddimib 5 }
fddimibPORTTable OBJECT IDENTIFIER ::= { fddimibPORT 2 }
fddimibPORTEntry OBJECT IDENTIFIER ::= { fddimibPORTTable 1 }
fddimibPORTSMTIndex OBJECT IDENTIFIER ::= { fddimibPORTEntry 1 }
transmission OBJECT IDENTIFIER ::= { mib-2 10 }
fddimibPORTIndex OBJECT IDENTIFIER ::= { fddimibPORTEntry 2 }
OwnerString ::=
	OCTET STRING (SIZE(0..255))

InterfaceIndex ::=
	INTEGER (1..2147483647)

InterfaceIndexOrZero ::=
	INTEGER (0..2147483647)

ifMIB OBJECT IDENTIFIER ::= { mib-2 31 }
ifMIBObjects OBJECT IDENTIFIER ::= { ifMIB 1 }
ifXTable OBJECT IDENTIFIER ::= { ifMIBObjects 1 }
ifXEntry OBJECT IDENTIFIER ::= { ifXTable 1 }
ifName OBJECT IDENTIFIER ::= { ifXEntry 1 }
interfaces OBJECT IDENTIFIER ::= { mib-2 2 }
ifTable OBJECT IDENTIFIER ::= { interfaces 2 }
ifEntry OBJECT IDENTIFIER ::= { ifTable 1 }
ifIndex OBJECT IDENTIFIER ::= { ifEntry 1 }
CiscoNetworkProtocol ::=
	INTEGER {
	ip(1),
	decnet(2),
	pup(3),
	chaos(4),
	xns(5),
	x121(6),
	appletalk(7),
	clns(8),
	lat(9),
	vines(10),
	cons(11),
	apollo(12),
	stun(13),
	novell(14),
	qllc(15),
	snapshot(16),
	atmIlmi(17),
	bstun(18),
	x25pvc(19),
	ipv6(20),
	cdm(21),
	nbf(22),
	bpxIgx(23),
	clnsPfx(24),
	http(25),
	unknown(65535)
	}

CiscoNetworkAddress ::=
	OCTET STRING

SAPType ::=
	INTEGER (0..254)

CountryCode ::=
	OCTET STRING (SIZE(0|2))

CountryCodeITU ::=
	OCTET STRING

EntPhysicalIndexOrZero ::=
	INTEGER (0..2147483647)

CiscoRowOperStatus ::=
	INTEGER {
	active(1),
	activeDependencies(2),
	inactiveDependency(3),
	missingDependency(4)
	}

CiscoPort ::=
	INTEGER (0..65535)

CiscoIpProtocol ::=
	INTEGER (0..255)

CiscoLocationClass ::=
	INTEGER {
	chassis(1),
	shelf(2),
	slot(3),
	subSlot(4),
	port(5),
	subPort(6),
	channel(7),
	subChannel(8)
	}

CiscoLocationSpecifier ::=
	OCTET STRING (SIZE(0..255))

CiscoInetAddressMask ::=
	OCTET STRING

CiscoAbsZeroBasedCounter32 ::=
	Gauge

CiscoSnapShotAbsCounter32 ::=
	OCTET STRING

CiscoAlarmSeverity ::=
	INTEGER {
	cleared(1),
	indeterminate(2),
	critical(3),
	major(4),
	minor(5),
	warning(6),
	info(7)
	}

PerfHighIntervalCount ::=
	OCTET STRING

ConfigIterator ::=
	OCTET STRING

BulkConfigResult ::=
	OCTET STRING (SIZE(0..255))

ListIndex ::=
	INTEGER (1..2147483647)

ListIndexOrZero ::=
	INTEGER (0..2147483647)

TimeIntervalSec ::=
	OCTET STRING

TimeIntervalMin ::=
	OCTET STRING

CiscoMilliSeconds ::=
	OCTET STRING

MicroSeconds ::=
	OCTET STRING

cisco OBJECT IDENTIFIER ::= { enterprises 9 }
workgroup OBJECT IDENTIFIER ::= { cisco 5 }
EntryStatus ::=
	INTEGER {
	valid(1),
	createRequest(2),
	underCreation(3),
	invalid(4)
	}

rmon OBJECT IDENTIFIER ::= { mib-2 16 }
tokenRing OBJECT IDENTIFIER ::= { rmon 10 }
ringStationTable OBJECT IDENTIFIER ::= { tokenRing 2 }
ringStationEntry OBJECT IDENTIFIER ::= { ringStationTable 1 }
ringStationMacAddress OBJECT IDENTIFIER ::= { ringStationEntry 2 }
PhysicalIndex ::=
	INTEGER (1..2147483647)

PhysicalClass ::=
	INTEGER {
	other(1),
	unknown(2),
	chassis(3),
	backplane(4),
	container(5),
	powerSupply(6),
	fan(7),
	sensor(8),
	module(9),
	port(10),
	stack(11)
	}

SnmpEngineIdOrNone ::=
	OCTET STRING (SIZE(0..32))

VlanIndex ::=
	INTEGER (0..4095)

ManagementDomainIndex ::=
	INTEGER (1..255)

VlanType ::=
	INTEGER {
	ethernet(1),
	fddi(2),
	tokenRing(3),
	fddiNet(4),
	trNet(5),
	deprecated(6)
	}

VlanTypeExt ::=
	OCTET STRING {
	vtpmanageable(0),
	internal(1),
	reserved(2),
	rspan(3)
	}

VendorIdType ::=
	OCTET STRING (SIZE(3))

ciscoStackMIB OBJECT IDENTIFIER ::= { workgroup 1 }

adapterCard OBJECT IDENTIFIER ::= { workgroup 2 }

wsc1000sysID OBJECT IDENTIFIER ::= { workgroup 3 }

wsc1100sysID OBJECT IDENTIFIER ::= { workgroup 4 }

wsc1200sysID OBJECT IDENTIFIER ::= { workgroup 5 }

wsc1400sysID OBJECT IDENTIFIER ::= { workgroup 6 }

wsc5000sysID OBJECT IDENTIFIER ::= { workgroup 7 }

wsc1600sysID OBJECT IDENTIFIER ::= { workgroup 8 }

cpw1600sysID OBJECT IDENTIFIER ::= { workgroup 9 }

wsc3000sysID OBJECT IDENTIFIER ::= { workgroup 10 }

wsc2900sysID OBJECT IDENTIFIER ::= { workgroup 12 }

cpw2200sysID OBJECT IDENTIFIER ::= { workgroup 13 }

esStack OBJECT IDENTIFIER ::= { workgroup 14 }

wsc3200sysID OBJECT IDENTIFIER ::= { workgroup 15 }

cpw1900sysID OBJECT IDENTIFIER ::= { workgroup 16 }

wsc5500sysID OBJECT IDENTIFIER ::= { workgroup 17 }

wsc1900sysID OBJECT IDENTIFIER ::= { workgroup 18 }

cpw1220sysID OBJECT IDENTIFIER ::= { workgroup 19 }

wsc2820sysID OBJECT IDENTIFIER ::= { workgroup 20 }

cpw1420sysID OBJECT IDENTIFIER ::= { workgroup 21 }

dcd OBJECT IDENTIFIER ::= { workgroup 22 }

wsc3100sysID OBJECT IDENTIFIER ::= { workgroup 23 }

cpw1800sysID OBJECT IDENTIFIER ::= { workgroup 24 }

cpw1601sysID OBJECT IDENTIFIER ::= { workgroup 25 }

wsc3001sysID OBJECT IDENTIFIER ::= { workgroup 26 }

cpw1220csysID OBJECT IDENTIFIER ::= { workgroup 27 }

wsc1900csysID OBJECT IDENTIFIER ::= { workgroup 28 }

wsc5002sysID OBJECT IDENTIFIER ::= { workgroup 29 }

cpw1220isysID OBJECT IDENTIFIER ::= { workgroup 30 }

wsc1900isysID OBJECT IDENTIFIER ::= { workgroup 31 }

tsStack OBJECT IDENTIFIER ::= { workgroup 32 }

wsc3900sysID OBJECT IDENTIFIER ::= { workgroup 33 }

wsc5505sysID OBJECT IDENTIFIER ::= { workgroup 34 }

wsc2926sysID OBJECT IDENTIFIER ::= { workgroup 35 }

wsc5509sysID OBJECT IDENTIFIER ::= { workgroup 36 }

wsc3920sysID OBJECT IDENTIFIER ::= { workgroup 37 }

wsc6006sysID OBJECT IDENTIFIER ::= { workgroup 38 }

wsc6009sysID OBJECT IDENTIFIER ::= { workgroup 39 }

wsc4003sysID OBJECT IDENTIFIER ::= { workgroup 40 }

wsc4912gsysID OBJECT IDENTIFIER ::= { workgroup 41 }

wsc2948gsysID OBJECT IDENTIFIER ::= { workgroup 42 }

wsc6509sysID OBJECT IDENTIFIER ::= { workgroup 44 }

wsc6506sysID OBJECT IDENTIFIER ::= { workgroup 45 }

wsc4006sysID OBJECT IDENTIFIER ::= { workgroup 46 }

wsc6509nebsysID OBJECT IDENTIFIER ::= { workgroup 47 }

wsc6knamsysID OBJECT IDENTIFIER ::= { workgroup 48 }

wsc2980gsysID OBJECT IDENTIFIER ::= { workgroup 49 }

wsc6513sysID OBJECT IDENTIFIER ::= { workgroup 50 }

wsc2980gasysID OBJECT IDENTIFIER ::= { workgroup 51 }

cisco7603sysID OBJECT IDENTIFIER ::= { workgroup 53 }

cisco7606sysID OBJECT IDENTIFIER ::= { workgroup 54 }

cisco7609sysID OBJECT IDENTIFIER ::= { workgroup 55 }

wsc6503sysID OBJECT IDENTIFIER ::= { workgroup 56 }

wsc4503sysID OBJECT IDENTIFIER ::= { workgroup 58 }

wsc4506sysID OBJECT IDENTIFIER ::= { workgroup 59 }

cisco7613sysID OBJECT IDENTIFIER ::= { workgroup 60 }

wsc6509nebasysID OBJECT IDENTIFIER ::= { workgroup 61 }

cisco7604sysID OBJECT IDENTIFIER ::= { workgroup 63 }

wsc6504esysID OBJECT IDENTIFIER ::= { workgroup 64 }

wsc1900LiteFxsysID OBJECT IDENTIFIER ::= { workgroup 175 }

systemGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 1 }

chassisGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 2 }

moduleGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 3 }

portGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 4 }

tftpGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 5 }

brouterGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 6 }

filterGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 7 }

monitorGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 8 }

vlanGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 9 }

securityGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 10 }

tokenRingGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 11 }

multicastGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 12 }

dnsGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 13 }

syslogGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 14 }

ntpGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 15 }

tacacsGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 16 }

ipPermitListGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 17 }

portChannelGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 18 }

portCpbGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 19 }

portTopNGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 20 }

mdgGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 21 }

radiusGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 22 }

traceRouteGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 24 }

fileCopyGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 25 }

voiceGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 26 }

portJumboFrameGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 27 }

switchAccelerationGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 28 }

configGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 29 }

sysMgmtType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	snmpV1(2),
	smux(3),
	snmpV2V1(4),
	snmpV2cV1(5),
	snmpV3V2cV1(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Type of network management running on this 
entity."
	::= { systemGrp 1 }


sysIpAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS optional
	DESCRIPTION "This entity's IP address."
	::= { systemGrp 2 }


sysNetMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS optional
	DESCRIPTION "This entity's subnet mask."
	::= { systemGrp 3 }


sysBroadcast OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS optional
	DESCRIPTION "This entity's broadcast address."
	::= { systemGrp 4 }


sysTrapReceiverTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SysTrapReceiverEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The trap receiver table (0 to 20 entries). This
table lists the addresses of Network Management
Stations that should receive trap messages from 
this entity when an exception condition occurs.

This table is deprecated and replaced by 
trapDestTable and other tables in SNMP-TARGET-
MIB and SNMP-NOTIFICATION-MIB."
	::= { systemGrp 5 }


sysTrapReceiverEntry OBJECT-TYPE
	SYNTAX SysTrapReceiverEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A trap receiver table entry."
	INDEX { sysTrapReceiverAddr  }

	::= { sysTrapReceiverTable 1 }

sysTrapReceiverEntry ::=
	SEQUENCE {
		sysTrapReceiverType INTEGER,
		sysTrapReceiverAddr IpAddress,
		sysTrapReceiverComm DisplayString
		}

sysTrapReceiverType OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Setting this object to invalid(2) removes the
corresponding entry from the sysTrapReceiverTable.
To add a new entry to the sysTrapReceiverTable, 
set this object to valid(1) for an IpAddress which
is not already in the table."
	::= { sysTrapReceiverEntry 1 }


sysTrapReceiverAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS optional
	DESCRIPTION "IP address for trap receiver."
	::= { sysTrapReceiverEntry 2 }


sysTrapReceiverComm OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Community string used for trap messages to this
trap receiver."
	::= { sysTrapReceiverEntry 3 }


sysCommunityTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SysCommunityEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The community table (4 entries). This table lists
community strings and their access levels. When an
SNMP message is received by this entity, the
community string in the message is compared with 
this table to determine access rights of the 
sender.

Note that this item is only accessible when using
the community string defined in sysCommunityRwa."
	::= { systemGrp 6 }


sysCommunityEntry OBJECT-TYPE
	SYNTAX SysCommunityEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A community table entry."
	INDEX { sysCommunityAccess  }

	::= { sysCommunityTable 1 }

sysCommunityEntry ::=
	SEQUENCE {
		sysCommunityAccess INTEGER,
		sysCommunityString DisplayString
		}

sysCommunityAccess OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	readOnly(2),
	readWrite(3),
	readWriteAll(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A value of readWriteAll(4) allows the community
to read and write all objects in the MIB. A 
value of readWrite(3) allows the community to 
read and write all objects except restricted 
items such as community strings, which cannot 
be accessed at all. A value of readOnly(2) allows
the community to read all objects except 
restricted items. A value of other(1) allows no
access."
	::= { sysCommunityEntry 1 }


sysCommunityString OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Configurable community string with access rights
defined by the value of sysCommunityAccess."
	::= { sysCommunityEntry 2 }


sysAttachType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	dualAttach(2),
	singleAttach(3),
	nullAttach(4),
	dualPrio(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The requested concentrator attachment type. For a
dual attachment concentrator which can be 
connected to the trunk ring, the first FDDI port
is configured as A and the second FDDI port is 
configured as B.
For a single attachment concentrator which can be
connected beneath another concentrator, the first
FDDI port is configured as M and the second FDDI
port is configured as S. For a null attachment
concentrator which can be located at the root of 
the tree, the first two FDDI ports are configured 
as M.
This object does not take effect until the
concentrator is reset. The current attachment
type can be determined from snmpFddiPORTPCType 
for ports 1 and 2."
	::= { systemGrp 7 }


sysTraffic OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Traffic meter value, i.e. the percentage of
bandwidth utilization for the previous polling
interval."
	::= { systemGrp 8 }


sysReset OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	reset(2),
	resetMinDown(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Writing reset(2) to this object resets the 
control logic of all modules in the system.
Writing resetMinDown(3) to this object resets the
system with the minimal system down time. The
resetMinDown(3) is only supported in systems with
redundant supervisors."
	::= { systemGrp 9 }


sysBaudRate OBJECT-TYPE
	SYNTAX INTEGER {
	b600(600),
	b1200(1200),
	b2400(2400),
	b4800(4800),
	b9600(9600),
	b19200(19200),
	b38400(38400)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The baud rate in bits per second of the RS-232
port."
	::= { systemGrp 10 }


sysInsertMode OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	standard(2),
	scheduled(3),
	graceful(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The mode for inserting M-ports into the 
concentrator ring."
	::= { systemGrp 11 }


sysClearMacTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The time (in hundredths of a second) since mac
counters were last cleared. Writing a 0 to this
object causes the mac counters to be cleared."
	::= { systemGrp 12 }


sysClearPortTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The time (in hundredths of a second) since port
counters were last cleared. Writing a 0 to this
object causes the port counters to be cleared."
	::= { systemGrp 13 }


sysFddiRingTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SysFddiRingEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The fddi ring map table. This table lists the
nodes in the FDDI ring(s) to which the system
belongs."
	::= { systemGrp 14 }


sysFddiRingEntry OBJECT-TYPE
	SYNTAX SysFddiRingEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A FDDI Ring table entry."
	INDEX { sysFddiRingSMTIndex , sysFddiRingAddress }

	::= { sysFddiRingTable 1 }

sysFddiRingEntry ::=
	SEQUENCE {
		sysFddiRingSMTIndex INTEGER,
		sysFddiRingAddress MacAddress,
		sysFddiRingNext MacAddress
		}

sysFddiRingSMTIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of the SMT index associated with this
ring."
	::= { sysFddiRingEntry 1 }


sysFddiRingAddress OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The MAC address of this node in the FDDI ring."
	::= { sysFddiRingEntry 2 }


sysFddiRingNext OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The MAC address of the next node in the FDDI 
ring."
	::= { sysFddiRingEntry 3 }


sysEnableModem OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the RS-232 port modem control
lines are enabled."
	::= { systemGrp 15 }


sysEnableRedirects OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether ICMP redirect messages are sent
or received by the system."
	::= { systemGrp 16 }


sysEnableRmon OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the SNMP agent supports the 
RMON MIB."
	::= { systemGrp 17 }


sysArpAgingTime OBJECT-TYPE
	SYNTAX INTEGER (0..1000000)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The aging time for the ARP table."
	::= { systemGrp 18 }


sysTrafficPeak OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Peak traffic meter value since the last time port
counters were cleared or the system started (see
sysClearPortTime)."
	::= { systemGrp 19 }


sysTrafficPeakTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time (in hundredths of a second) since the 
peak traffic meter value occurred."
	::= { systemGrp 20 }


sysCommunityRwa OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When an SNMP message is received by this entity, 
the community string in the message is compared 
with this string first. If it matches, read-write
access is granted to all items in the MIB. If it
doesn't match, the sysCommunityRw string is 
compared next.

Note that this item is only accessible when using
the community string defined in sysCommunityRwa."
	::= { systemGrp 21 }


sysCommunityRw OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When an SNMP message is received by this entity, 
the community string in the message is compared 
with this string second. If it matches, read-write
access is granted to all items in the MIB except
restricted items such as community strings. 
(Restricted items appear empty when read and 
return a no such name error when an attempt is
made to write them.)  If it doesn't match, the 
sysCommunityRo string is compared next.

Note that this item is only accessible when using
the community string defined in sysCommunityRwa."
	::= { systemGrp 22 }


sysCommunityRo OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When an SNMP message is received by this entity, 
the community string in the message is compared 
with this string third. If it matches, read-only 
access is granted to all items in the MIB except 
restricted items such as community strings. 
(Restricted items appear empty when read.) If it 
doesn't match, no access is granted, no response 
is sent back to the SNMP requester, and an SNMP
is sent to the SNMP trap receivers if configured.

Note that this item is only accessible when using
the community string defined in sysCommunityRwa."
	::= { systemGrp 23 }


sysEnableChassisTraps OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether chassisAlarmOn and 
chassisAlarmOff traps in this MIB should be 
generated."
	::= { systemGrp 24 }


sysEnableModuleTraps OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether moduleUp and moduleDown traps
in this MIB should be generated."
	::= { systemGrp 25 }


sysEnableBridgeTraps OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether newRoot and topologyChange 
traps in the BRIDGE-MIB (RFC 1493) should be 
generated."
	::= { systemGrp 26 }


sysIpVlan OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This entity's IP address Virtual LAN 
association."
	::= { systemGrp 27 }


sysConfigChangeTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time (in hundredths of a second) since the
configuration of the system was last changed."
	::= { systemGrp 28 }


sysEnableRepeaterTraps OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the traps in the REPEATER-MIB
(RFC1516) should be generated."
	::= { systemGrp 29 }


sysBannerMotd OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Message of the day banner which is displayed on
the Command Line Interface before log in."
	::= { systemGrp 30 }


sysEnableIpPermitTraps OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the IP permit traps in this MIB
should be generated."
	::= { systemGrp 31 }


sysTrafficMeterTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SysTrafficMeterEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The system traffic meter table. This table
lists the traffic meters available in the 
system."
	::= { systemGrp 32 }


sysTrafficMeterEntry OBJECT-TYPE
	SYNTAX SysTrafficMeterEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A traffic meter table entry."
	INDEX { sysTrafficMeterType  }

	::= { sysTrafficMeterTable 1 }

sysTrafficMeterEntry ::=
	SEQUENCE {
		sysTrafficMeterType INTEGER,
		sysTrafficMeter INTEGER,
		sysTrafficMeterPeak INTEGER,
		sysTrafficMeterPeakTime TimeTicks
		}

sysTrafficMeterType OBJECT-TYPE
	SYNTAX INTEGER {
	systemSwitchingBus(1),
	switchingBusA(2),
	switchingBusB(3),
	switchingBusC(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of traffic meter."
	::= { sysTrafficMeterEntry 1 }


sysTrafficMeter OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Traffic meter value, i.e. the percentage of
bandwidth utilization for the previous polling
interval."
	::= { sysTrafficMeterEntry 2 }


sysTrafficMeterPeak OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Peak traffic meter value since the system 
started."
	::= { sysTrafficMeterEntry 3 }


sysTrafficMeterPeakTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time (in hundredths of a second) since the
peak traffic meter value occurred."
	::= { sysTrafficMeterEntry 4 }


sysEnableVmpsTraps OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the vmVmpsChange trap defined
in CISCO-VLAN-MEMBERSHIP-MIB should be generated."
	::= { systemGrp 33 }


sysConfigChangeInfo OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates which NVRAM block is changed by whom."
	::= { systemGrp 34 }


sysEnableConfigTraps OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether sysConfigChange trap in this 
MIB should be generated."
	::= { systemGrp 35 }


sysConfigRegister OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(2))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of configuration register that will be 
used by the supervisor module when the system is 
restarted.
This MIB object is only supported in systems with
supervisor modules having ROMMON support.

The lowest four bits of the configuration register
(bits 3,2,1, and 0) form the boot field and the 
boot field determines whether the system boots
from as the following:
0000  -- stay in ROM monitor
0001  -- boot from the first bootable system 
images on the bootflash
0010 to 1111
-- boot from the first bootable system 
images specified in the sysBootVariable

The bit 5(0x0020) indicates whether the 
configuration file specified in 
sysStartupConfigSourceFile will beused recurringly
or not whenever the system resets. If this bit is 
not set, the configuration file(s) specified in 
sysStartupConfigSourceFile will only be used once 
and the value of sysStartupConfigSourceFile will 
be reset to empty string automatically during the 
next system reset.

If the bit 6(0x0040) is set, the system will start
with default configuration.

The bits 11,12 (0x0800, 0x1000) are used to 
specify the console line speed in ROM monitor mode
as the following:
00   -- 9600
01   -- 1200
10   -- 4800
11   -- 2400

The unspecified bits are not used."
	::= { systemGrp 36 }


sysBootVariable OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of the system boot images in the BOOT 
environment variable on supervisor modules with 
ROMMON. The format of sysBootVariable should be:
<device>:[<fileName>],1;{<device>:[<fileName>],1;...}
If the [fileName] is not specified, the first file
on the <device> will be used.

This MIB object is only supported in systems 
having supervisor modules with ROMMON."
	::= { systemGrp 37 }


sysBootedImage OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The name of the system boot image which the 
system booted from.
This MIB object is only supported in the system 
with Supervisor module 3 present."
	::= { systemGrp 38 }


sysEnableEntityTrap OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether entConfigChange trap in the 
ENTITY-MIB should be generated."
	::= { systemGrp 39 }


sysEnableStpxTrap OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether stpxInconsistencyUpdate and
stpxRootInconsistencyUpdate traps in the
CISCO-STP-EXTENSIONS-MIB should be generated."
	::= { systemGrp 40 }


sysExtendedRmonVlanModeEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the Extended RMON VlanMode 
feature is enabled or not. If it is set to 
enabled(1), hostTable (rmon 4) will provide the 
information of a list of VLANs instead of a list
of MAC addresses for a monitored trunking port."
	::= { systemGrp 41 }


sysExtendedRmonNetflowPassword OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The password for enabling the Extended RMON 
Netflow feature and this object has to be set 
before setting sysExtendedRmonNetflowEnable to 
enabled(1). When reading this object, it will 
return empty string.

If the platform supports 
sysExtendedRmonNetflowModuleMask object, this 
object will be not be supported."
	::= { systemGrp 42 }


sysExtendedRmonNetflowEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the Extended RMON Netflow 
feature is enabled or not. Setting this object to 
disabled(2), will clear 
sysExtendedRmonNetflowPassword automatically.
Setting this object to enabled(1) will be rejected
if sysExtendedRmonNetflowPassword does not contain
a valid password.

If the platform supports 
sysExtendedRmonNetflowModuleMask object, this
object will not be supported."
	::= { systemGrp 43 }


sysExtendedRmonVlanAgentEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the Extended RMON VlanAgent 
feature is enabled or not. If it is set to 
enabled(1), the extended RMON will also provide
the information on VLAN based interface in 
addition to the port based interface for the 
monitored traffic.
Setting this object to enabled(1), it will consume
more CPU for processing each monitored frame and 
affect Extended RMON performance."
	::= { systemGrp 44 }


sysExtendedRmonEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	noNAMPresent(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the SNMP agent supports the 
extended RMON feature. noNAMPresent(3) is a 
read-only value and the agent will return this 
value when the sysEnableExtendedRmon is set to 
enabled(1), but Network Analysis module is not 
present in the system."
	::= { systemGrp 45 }


sysConsolePrimaryLoginAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	tacacs(1),
	radius(2),
	local(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether TACACS+ or RADIUS is the 
primary login authentication, i.e which method 
will be tried first for a console session. If 
tacacsLoginAuthentication and 
radiusLoginAuthentication are set to disabled 
then sysConsolePrimaryLoginAuthentication will 
have a value of local(3)."
	::= { systemGrp 46 }


sysConsolePrimaryEnableAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	tacacs(1),
	radius(2),
	local(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether TACACS+ or RADIUS is the 
primary enable authentication, i.e which method 
will be  tried first for a console session. If
tacacsEnableAuthentication and
radiusEnableAuthentication are set to disabled 
then sysConsolePrimaryEnableAuthentication will 
have a value of local(3)."
	::= { systemGrp 47 }


sysTelnetPrimaryLoginAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	tacacs(1),
	radius(2),
	local(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether TACACS+ or RADIUS is the 
primary login authentication, i.e which method 
will be  tried first for a telnet session. If 
tacacsLoginAuthentication and
radiusLoginAuthentication are set to disabled then
sysTelnetPrimaryLoginAuthentication will have a
value of local(3)."
	::= { systemGrp 48 }


sysTelnetPrimaryEnableAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	tacacs(1),
	radius(2),
	local(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether TACACS+ or RADIUS is the 
primary enable authentication, i.e which method 
will be tried first for a telnet session. If
tacacsEnableAuthentication and
radiusEnableAuthentication are set to disabled 
then sysTelnetPrimaryEnableAuthentication will 
have a value of local(3)."
	::= { systemGrp 49 }


sysStartupConfigSource OBJECT-TYPE
	SYNTAX INTEGER {
	flashFileRecurring(1),
	flashFileNonRecurring(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the configuration file(s) 
specified in sysStartupConfigSourceFile will be 
used recurringly or not whenever the system 
resets.
Setting this object to flashFileNonRecurring(2), 
the configuration file(s) specified in 
sysStartupConfigSourceFile will only be used once 
and the value of sysStartupConfigSourceFile will
be reset to empty string automatically during the
next system reset.

This MIB object is only supported in systems with 
SupG supervisor models or supervisor models that 
have flash file system support."
	::= { systemGrp 50 }


sysStartupConfigSourceFile OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates which configuration file(s) on the 
flash device will be used during the next system 
startup.
If the value of this MIB object contains one or 
multiple valid configuration file(s), then the 
valid configuration file(s) will reconfigure the 
system during the next system startup one by one
in the order specified. If the value of this MIB 
object does not contain the valid configuration 
file(s) on the device, the NVRAM configuration 
will be used instead.

For supervisor models wsx5540 and wsx5550, only
'cfg1' and 'cfg2' are valid file names.

For supervisor models with the flash file system 
support, the valid file name has the format of
'<device:><file>[;<device:><file>...]'.

This MIB object is only supported in systems with
supervisor models wsx5540 and wsx5550 or 
supervisor models with the flash file system 
support."
	::= { systemGrp 51 }


sysConfigSupervisorModuleNo OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the supervisor module (active or 
standby, if applicable) that the MIB objects 
sysConfigRegister, sysBootVariable, 
sysStartupConfigSource, and 
sysStartupConfigSourceFile are specified for.

This MIB object is only supported by the 
supervisor modules with the flash file system 
feature support. The default value for this MIB 
object is set to the active supervisor module
number."
	::= { systemGrp 52 }


sysStandbyPortEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the standby port feature is 
enabled or not. If this object is set to 
enabled(1), the uplink ports on the standby 
supervisor module are activated; otherwise, the 
uplink ports on the standby supervisor remain 
inactive."
	::= { systemGrp 53 }


sysPortFastBpduGuard OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether BPDU Guard for Spanning Tree 
Port Fast Start feature is enabled or not. If the 
value of this object is set to enabled(1), then 
when the switch receives a BPDU from a port with 
the value of portSpantreeFastStart object set to 
enabled(1), that port is immediately disabled."
	::= { systemGrp 54 }


sysErrDisableTimeoutEnable OBJECT-TYPE
	SYNTAX OCTET STRING {
	other(0),
	udld(1),
	duplexMismatch(2),
	bpduPortGuard(3),
	channelMisconfig(4),
	crossBarFallBack(5),
	gl2ptIngressLoop(6),
	gl2ptThresholdExceed(7),
	bcastSuppression(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether errdisable timeout feature is
enabled for each of the causes or not. The 
other(0) is for all causes other than:
udld(1),
duplexMismatch(2),
bpduPortGuard(3),
channelMisconfig(4),
crossBarFallBack(5), (only supported on platforms
that support this errdisable
reason.)
gl2ptIngressLoop(6), (only supported on platforms
that support this errdisable
reason.)
gl2ptThresholdExceed(7), (only supported on 
platforms that support this 
errdisable reason.)
bcastSuppression(8). (only supported on platforms
that support this errdisable
reason.)

A port is in errdisable state if ifAdminStatus of 
the port in the ifTable is up(1) while the port is
shutdown during runtime by the system due to error
detection. If the value of object 
portAdditionalOperStatus for the port is
errdisable(11) then that port is in errdisable 
state. 

By setting the bit corresponding to a cause to 
'1', this errdisable timeout feature is enabled 
on the system for the ports that are put into 
errdisable state by that cause, then those ports 
can be re-enabled automatically during the timeout
interval as specified by 
sysErrDisableTimeoutInterval object after they
are put into errdisable state by that cause; 
otherwise, by setting the bit corresponding to a 
cause to '0', this errdisable timeout feature is
disabled on the system for the ports that are put
into errdisable state by that cause, then those 
ports will remain shutdown until the user 
re-enable it manually."
	::= { systemGrp 55 }


sysErrDisableTimeoutInterval OBJECT-TYPE
	SYNTAX INTEGER (30..86400)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the timeout interval in seconds for 
errdisable timeout feature."
	::= { systemGrp 56 }


sysTrafficMonitorHighWaterMark OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the high watermark for the switching 
bus traffic in percentage. Syslog messages will be
generated if the switching bus traffic goes over 
this object value during the polling interval. 
Setting this object value to 100 would mean no 
syslog message would be generated. For systems 
with 3 switching buses, high watermark and syslog 
will be for each switching bus."
	::= { systemGrp 57 }


sysHighAvailabilityEnable OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether High System Availability 
feature is enabled or not. If this feature is 
enabled, the active supervisor's layer-2 protocol
state will be synched to the standby supervisor 
module, thus maintaining an up-to-date protocol 
data on the standby supervisor whenever possible.

This object is supported in systems with High 
System Availability feature support."
	::= { systemGrp 58 }


sysHighAvailabilityVersioningEnable OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether support for supervisor software
image versioning (i.e., the capability to run 
different images on the active and standby 
supervisors) for the High System Availability 
feature is enabled or not.

This object is supported in systems with High 
System Availability feature support."
	::= { systemGrp 59 }


sysHighAvailabilityOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	running(1),
	notRunning(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the operational status of High System
Availability feature. If the value of this object
is notRunning(2), then the reason why this feature
is actually not running is specified by the object
sysHighAvailabilityNotRunningReason. If the value
of this object is running(1), then the value of
object sysHighAvailabilityOperReason is empty 
string.

This object is supported in systems with High 
System Availability feature support."
	::= { systemGrp 60 }


sysHighAvailabilityNotRunningReason OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the reason why High System Availability
feature is not running when the value of
sysHighAvailabilityOperStatus is notRunning(2).
The value of this object is empty string when
the value of sysHighAvailabilityOperStatus is
running(1).

This object is supported in systems with High 
System Availability feature support."
	::= { systemGrp 61 }


sysExtendedRmonNetflowModuleMask OBJECT-TYPE
	SYNTAX OCTET STRING {
	module1(0),
	module2(1),
	module3(2),
	module4(3),
	module5(4),
	module6(5),
	module7(6),
	module8(7),
	module9(8),
	module10(9),
	module11(10),
	module12(11),
	module13(12),
	module14(13),
	module15(14),
	module16(15)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates Netflow Export Data (NDE) to be sent to
which Network Analysis Modules (NAM) in the same 
chassis.

If users set a bit from off to on, the system will
check the corresponding module is a NAM or not.
If it is not, the system should return error.

This mib object will only be supported by the 
system that can support the multiple NAM modules."
	::= { systemGrp 62 }


sshPublicKeySize OBJECT-TYPE
	SYNTAX INTEGER (0|512..2048)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates public key size in bits. In write, if
a key does not exist, a value between 512 and 2048
will generate a RSA public key with the value as
its key size for secured shell access. If a key
exists a value other than 0 is valid, indicating a
clear key operation. In read, the current key size
is returned if a key exists. If not,a 0 is 
returned."
	::= { systemGrp 63 }


sysMaxRmonMemory OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the maximum percentage of the memory
usage for RMON."
	::= { systemGrp 64 }


sysMacReductionAdminEnable OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether Mac Reduction feature (to
reduce the number of MAC addresses used in
bridge identifier) is administratively enabled
on the device or not."
	::= { systemGrp 65 }


sysMacReductionOperEnable OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether Mac Reduction feature (to
reduce the number of MAC addresses used in
bridge identifier) is operationaly enabled
on the device or not.

If the value of this object is true(1), then
the accepted values for dot1dStpPriority
in BRIDGE-MIB should be multiples of 4096 plus
bridge instance ID, such as VlanIndex. Changing
this object value might cause the values of
dot1dBaseBridgeAddress and dot1dStpPriority
in BRIDGE-MIB to be changed also."
	::= { systemGrp 66 }


sysStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	minorFault(3),
	majorFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The operational status of the system."
	::= { systemGrp 67 }


chassisSysType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	wsc1000(3),
	wsc1001(4),
	wsc1100(5),
	wsc5000(6),
	wsc2900(7),
	wsc5500(8),
	wsc5002(9),
	wsc5505(10),
	wsc1200(11),
	wsc1400(12),
	wsc2926(13),
	wsc5509(14),
	wsc6006(15),
	wsc6009(16),
	wsc4003(17),
	wsc5500e(18),
	wsc4912g(19),
	wsc2948g(20),
	wsc6509(22),
	wsc6506(23),
	wsc4006(24),
	wsc6509NEB(25),
	wsc2980g(26),
	wsc6513(27),
	wsc2980ga(28),
	cisco7603(30),
	cisco7606(31),
	cisco7609(32),
	wsc6503(33),
	wsc6509NEBA(34),
	wsc4507(35),
	wsc4503(36),
	wsc4506(37),
	wsc65509(38),
	cisco7613(40),
	cisco7604(42),
	wsc6504e(43)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The chassis system type."
	::= { chassisGrp 1 }


chassisBkplType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	fddi(2),
	fddiEthernet(3),
	giga(4),
	giga3(5),
	giga3E(6),
	giga12(7),
	giga16(8),
	giga40(9)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The chassis backplane type."
	::= { chassisGrp 2 }


chassisPs1Type OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	none(2),
	w50(3),
	w200(4),
	w600(5),
	w80(6),
	w130(7),
	wsc5008(8),
	wsc5008a(9),
	w175(10),
	wsc5068(11),
	wsc5508(12),
	wsc5568(13),
	wsc5508a(14),
	w155(15),
	w175pfc(16),
	w175dc(17),
	wsc5008b(18),
	wsc5008c(19),
	wsc5068b(20),
	wscac1000(21),
	wscac1300(22),
	wscdc1000(23),
	wscdc1360(24),
	wsc4008(25),
	wsc5518(26),
	wsc5598(27),
	w120(28),
	externalPS(29),
	wscac2500w(30),
	wscdc2500w(31),
	wsc4008dc(32),
	wscac4000w(33),
	wscdc4000w(34),
	pwr950ac(35),
	pwr950dc(36),
	pwr1900ac(37),
	pwr1900dc(38),
	pwr1900ac6(39),
	wsx4008ac650w(42),
	wsx4008dc650w(43),
	wscac3000w(44),
	pwrc451000ac(46),
	pwrc452800acv(47),
	pwrc451300acv(48),
	pwrc451400dcp(49),
	wscdc3000w(50),
	pwr1400ac(51),
	wscac6000w(53),
	pwr2700ac(54),
	pwr2700dc(55),
	pwr2700ac4(59),
	pwr2700dc4(60)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Type of power supply number 1."
	::= { chassisGrp 3 }


chassisPs1Status OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	minorFault(3),
	majorFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Status of power supply number 1. If the status is
not ok, the value of chassisPs1TestResult gives
more detailed information about the power supply's
failure condition(s)."
	::= { chassisGrp 4 }


chassisPs1TestResult OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Test result for power supply number 1. A zero
indicates that the supply passed all tests. Bits
set in the result indicate error conditions."
	::= { chassisGrp 5 }


chassisPs2Type OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	none(2),
	w50(3),
	w200(4),
	w600(5),
	w80(6),
	w130(7),
	wsc5008(8),
	wsc5008a(9),
	w175(10),
	wsc5068(11),
	wsc5508(12),
	wsc5568(13),
	wsc5508a(14),
	w155(15),
	w175pfc(16),
	w175dc(17),
	wsc5008b(18),
	wsc5008c(19),
	wsc5068b(20),
	wscac1000(21),
	wscac1300(22),
	wscdc1000(23),
	wscdc1360(24),
	wsc4008(25),
	wsc5518(26),
	wsc5598(27),
	w120(28),
	externalPS(29),
	wscac2500w(30),
	wscdc2500w(31),
	wsc4008dc(32),
	wscac4000w(33),
	wscdc4000w(34),
	pwr950ac(35),
	pwr950dc(36),
	pwr1900ac(37),
	pwr1900dc(38),
	pwr1900ac6(39),
	wsx4008ac650w(42),
	wsx4008dc650w(43),
	wscac3000w(44),
	pwrc451000ac(46),
	pwrc452800acv(47),
	pwrc451300acv(48),
	pwrc451400dcp(49),
	wscdc3000w(50),
	pwr1400ac(51),
	wscac6000w(53),
	pwr2700ac(54),
	pwr2700dc(55)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Type of power supply number 2."
	::= { chassisGrp 6 }


chassisPs2Status OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	minorFault(3),
	majorFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Status of power supply number 2. If the status is
not ok, the value of chassisPs2TestResult gives 
more detailed information about the power supply's
failure condition(s)."
	::= { chassisGrp 7 }


chassisPs2TestResult OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Test result for power supply number 2. A zero
indicates that the supply passed all tests. Bits
set in the result indicate error conditions."
	::= { chassisGrp 8 }


chassisFanStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	minorFault(3),
	majorFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Status of the chassis fan. If the status is not
ok, the value of chassisFanTestResult gives more
detailed information about the fan's failure
condition(s)."
	::= { chassisGrp 9 }


chassisFanTestResult OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Test result for the chassis fan. A zero indicates
that the fan passed all tests. Bits set in the
result indicate error conditions."
	::= { chassisGrp 10 }


chassisMinorAlarm OBJECT-TYPE
	SYNTAX INTEGER {
	off(1),
	on(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The chassis minor alarm status."
	::= { chassisGrp 11 }


chassisMajorAlarm OBJECT-TYPE
	SYNTAX INTEGER {
	off(1),
	on(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The chassis major alarm status."
	::= { chassisGrp 12 }


chassisTempAlarm OBJECT-TYPE
	SYNTAX INTEGER {
	off(1),
	on(2),
	critical(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The chassis temperature alarm status."
	::= { chassisGrp 13 }


chassisNumSlots OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of slots in the chassis available for
plug-in modules."
	::= { chassisGrp 14 }


chassisSlotConfig OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of which slots in the chassis have
modules inserted. This is an integer value with
bits set to indicate configured modules. It can be
interpreted as a sum of f(x) as x goes from 1 to 
the number of slots, where f(x) = 0 for no module
inserted and f(x) = exp(2, x-1) for a module
inserted."
	::= { chassisGrp 15 }


chassisModel OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The manufacturer's model number for the chassis."
	::= { chassisGrp 16 }


chassisSerialNumber OBJECT-TYPE
	SYNTAX INTEGER (0..999999999)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The serial number of the chassis in a numeric 
format. If the chassis uses an alphanumeric 
serial number, this MIB object will return 0."
	::= { chassisGrp 17 }


chassisComponentTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ChassisComponentEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A list of the chassis related components in the
chassis."
	::= { chassisGrp 18 }


chassisComponentEntry OBJECT-TYPE
	SYNTAX ChassisComponentEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Entry containing information about one component
in the chassis."
	INDEX { chassisComponentIndex  }

	::= { chassisComponentTable 1 }

chassisComponentEntry ::=
	SEQUENCE {
		chassisComponentIndex INTEGER,
		chassisComponentType INTEGER,
		chassisComponentSerialNumber DisplayString,
		chassisComponentHwVersion DisplayString,
		chassisComponentModel DisplayString
		}

chassisComponentIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A unique value for each chassis related component
within the chassis."
	::= { chassisComponentEntry 1 }


chassisComponentType OBJECT-TYPE
	SYNTAX INTEGER {
	unknown(1),
	wsc6000cl(2),
	wsc6000vtt(3),
	wsc6000tempSensor(4),
	wsc6513Clock(5),
	clk7600(6),
	ws9SlotFan(7),
	fanMod9(8),
	wsc6506eFan(10),
	wsc6509eFan(11),
	wsc6513eFan(12),
	wsc6503eFan(13),
	wsc6000vtte(14),
	fanMod4HS(15)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The type of the chassis component."
	::= { chassisComponentEntry 2 }


chassisComponentSerialNumber OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The serial number of the chassis component."
	::= { chassisComponentEntry 3 }


chassisComponentHwVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The hardware version of the chassis component."
	::= { chassisComponentEntry 4 }


chassisComponentModel OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The manufacturer's model number for the chassis
component."
	::= { chassisComponentEntry 5 }


chassisSerialNumberString OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The serial number of the chassis. This MIB object
will return the chassis serial number for any 
chassis that either a numeric or an alphanumeric
serial number is being used."
	::= { chassisGrp 19 }


chassisPs3Type OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	none(2),
	wsc4008(25),
	wsc4008dc(32)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Type of power supply number 3. This object is
only supported by systems that can have 3 or more
power supplies."
	::= { chassisGrp 20 }


chassisPs3Status OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	minorFault(3),
	majorFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Status of power supply number 3. If the status is
not ok, the value of chassisPs3TestResult gives 
more detailed information about the power supply's
failure condition(s). This object is only 
supported by systems that can have 3 or more 
power supplies."
	::= { chassisGrp 21 }


chassisPs3TestResult OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Test result for power supply number 3. A zero
indicates that the supply passed all tests. Bits
set in the result indicate error conditions. This
object is only supported by systems that can
have 3 or more power supplies."
	::= { chassisGrp 22 }


chassisPEMInstalled OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether Power Entry Module is installed
into the Chassis or not. Power Entry Module is a
connection into the system for an external
power supply of -48 Volts. This object is only
supported by systems that can have 3 or more power
supplies."
	::= { chassisGrp 23 }


moduleTable OBJECT-TYPE
	SYNTAX SEQUENCE OF ModuleEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of module entries. The number of entries
is the number of modules in the chassis."
	::= { moduleGrp 1 }


moduleEntry OBJECT-TYPE
	SYNTAX ModuleEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing information about one module in
the chassis."
	INDEX { moduleIndex  }

	::= { moduleTable 1 }

moduleEntry ::=
	SEQUENCE {
		moduleIndex INTEGER,
		moduleType INTEGER,
		moduleSerialNumber INTEGER,
		moduleHwHiVersion INTEGER,
		moduleHwLoVersion INTEGER,
		moduleFwHiVersion INTEGER,
		moduleFwLoVersion INTEGER,
		moduleSwHiVersion INTEGER,
		moduleSwLoVersion INTEGER,
		moduleStatus INTEGER,
		moduleTestResult INTEGER,
		moduleAction INTEGER,
		moduleName DisplayString,
		moduleNumPorts INTEGER,
		modulePortStatus OCTET STRING,
		moduleSubType INTEGER,
		moduleModel DisplayString,
		moduleHwVersion DisplayString,
		moduleFwVersion DisplayString,
		moduleSwVersion DisplayString,
		moduleStandbyStatus INTEGER,
		moduleIPAddress IpAddress,
		moduleIPAddressVlan VlanIndex,
		moduleSubType2 INTEGER,
		moduleSlotNum INTEGER,
		moduleSerialNumberString DisplayString,
		moduleEntPhysicalIndex PhysicalIndex,
		moduleAdditionalStatus BITS
		}

moduleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value for each module within the 
chassis."
	::= { moduleEntry 1 }


moduleType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	empty(2),
	wsc1000(3),
	wsc1001(4),
	wsc1100(5),
	wsc1200(11),
	wsc1400(12),
	wsx1441(13),
	wsx1444(14),
	wsx1450(15),
	wsx1483(16),
	wsx1454(17),
	wsx1455(18),
	wsx1431(19),
	wsx1465(20),
	wsx1436(21),
	wsx1434(22),
	wsx5009(23),
	wsx5013(24),
	wsx5011(25),
	wsx5010(26),
	wsx5113(27),
	wsx5101(28),
	wsx5103(29),
	wsx5104(30),
	wsx5155(32),
	wsx5154(33),
	wsx5153(34),
	wsx5111(35),
	wsx5213(36),
	wsx5020(37),
	wsx5006(38),
	wsx5005(39),
	wsx5509(40),
	wsx5506(41),
	wsx5505(42),
	wsx5156(43),
	wsx5157(44),
	wsx5158(45),
	wsx5030(46),
	wsx5114(47),
	wsx5223(48),
	wsx5224(49),
	wsx5012(50),
	wsx5302(52),
	wsx5213a(53),
	wsx5380(54),
	wsx5201(55),
	wsx5203(56),
	wsx5530(57),
	wsx5161(61),
	wsx5162(62),
	wsx5165(65),
	wsx5166(66),
	wsx5031(67),
	wsx5410(68),
	wsx5403(69),
	wsx5201r(73),
	wsx5225r(74),
	wsx5014(75),
	wsx5015(76),
	wsx5236(77),
	wsx5540(78),
	wsx5234(79),
	wsx5012a(81),
	wsx5167(82),
	wsx5239(83),
	wsx5168(84),
	wsx5305(85),
	wsx5550(87),
	wsf5541(88),
	wsx5534(91),
	wsx5536(92),
	wsx5237(96),
	wsf6kFe48af(106),
	wsf6kGe48af(107),
	wsf6kVpwrGe(108),
	wsf6kFe48x2af(109),
	wsx6ksup12ge(200),
	wsx6408gbic(201),
	wsx6224mmmt(202),
	wsx6248rj45(203),
	wsx6248tel(204),
	wsx6302msm(206),
	wsf6kmsfc(207),
	wsx6024flmt(208),
	wsx6101oc12mmf(209),
	wsx6101oc12smf(210),
	wsx6416gemt(211),
	wsx6182pa(212),
	osm2oc12AtmMM(213),
	osm2oc12AtmSI(214),
	osm4oc12PosMM(216),
	osm4oc12PosSI(217),
	osm4oc12PosSL(218),
	wsx6ksup1a2ge(219),
	wsx6302amsm(220),
	wsx6416gbic(221),
	wsx6224ammmt(222),
	wsx6380nam(223),
	wsx6248arj45(224),
	wsx6248atel(225),
	wsx6408agbic(226),
	wsx6608t1(229),
	wsx6608e1(230),
	wsx6624fxs(231),
	wsx6316getx(233),
	wsf6kmsfc2(234),
	wsx6324mmmt(235),
	wsx6348rj45(236),
	wsx6ksup22ge(237),
	wsx6324sm(238),
	wsx6516gbic(239),
	osm4geWanGbic(240),
	osm1oc48PosSS(241),
	osm1oc48PosSI(242),
	osm1oc48PosSL(243),
	wsx6381ids(244),
	wsc6500sfm(245),
	osm16oc3PosMM(246),
	osm16oc3PosSI(247),
	osm16oc3PosSL(248),
	osm2oc12PosMM(249),
	osm2oc12PosSI(250),
	osm2oc12PosSL(251),
	wsx650210ge(252),
	osm8oc3PosMM(253),
	osm8oc3PosSI(254),
	osm8oc3PosSL(255),
	wsx6548rj45(258),
	wsx6524mmmt(259),
	wsx6066SlbApc(260),
	wsx6516getx(261),
	osm2oc48OneDptSS(265),
	osm2oc48OneDptSI(266),
	osm2oc48OneDptSL(267),
	wsx6816gbic(271),
	osm1choc48T3SS(276),
	wsx6500sfm2(278),
	wsx6348rj21(281),
	wsx6548rj21(282),
	wsx6600(284),
	wsx650110gex4(285),
	osm4oc3PosSI(286),
	wsSvcIdsm2(290),
	wsSvcNam2(291),
	wsSvcFwm1(292),
	wsSvcCe1(293),
	wsSvcSsl1(294),
	wsx4012(300),
	wsx4148rj(301),
	wsx4232gbrj(302),
	wsx4306gb(303),
	wsx4418gb(304),
	wsx44162gbtx(305),
	wsx4912gb(306),
	wsx2948gbrj(307),
	wsx2948(309),
	wsx4912(310),
	wsx4424sxmt(311),
	wsx4232rjxx(312),
	wsx4148rj21(313),
	wsx4124fxmt(317),
	wsx4013(318),
	wsx4232l3(319),
	wsx4604gwy(320),
	wsx44122Gbtx(321),
	wsx2980(322),
	wsx2980rj(323),
	wsx2980gbrj(324),
	wsx4019(325),
	wsx4148rj45v(326),
	wsx4424gbrj45(330),
	wsx4148fxmt(331),
	wsx4448gblx(332),
	wsx4448gbrj45(334),
	wsx6148x2rj45(506),
	osm1choc12T3SI(604),
	osm2oc12PosMMPlus(608),
	osm2oc12PosSIPlus(609),
	osm16oc3PosSIPlus(610),
	osm1oc48PosSSPlus(611),
	osm1oc48PosSIPlus(612),
	osm1oc48PosSLPlus(613),
	osm4oc3PosSIPlus(614),
	osm8oc3PosSIPlus(616),
	osm4oc12PosSIPlus(617),
	wsSvcMwam1(910),
	wsSvcCsg1(911),
	wsx6148rj45v(912),
	wsx6148rj21v(913),
	wsSvcNam1(914),
	wsx6548getx(915),
	wsSvcAons1(925),
	wssup720(1001),
	wssup720base(1002)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of module."
	::= { moduleEntry 2 }


moduleSerialNumber OBJECT-TYPE
	SYNTAX INTEGER (0..999999999)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The serial number of the module in a numeric 
format. If the module uses an alphanumeric serial
number, this MIB object will return 0."
	::= { moduleEntry 3 }


moduleHwHiVersion OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The high part of the hardware version of the 
module.
For example, if the hardware version is 3.1, the
value of moduleHwHiVersion is 3."
	::= { moduleEntry 4 }


moduleHwLoVersion OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The low part of the hardware version of the 
module.
For example, if the hardware version is 3.1, the
value of moduleHwLoVersion is 1."
	::= { moduleEntry 5 }


moduleFwHiVersion OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The high part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwHiVersion is 3."
	::= { moduleEntry 6 }


moduleFwLoVersion OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The low part of the firmware version number. For
example, if the firmware version is 3.1, the value
of moduleFwLoVersion is 1."
	::= { moduleEntry 7 }


moduleSwHiVersion OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The high part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwHiVersion is 3."
	::= { moduleEntry 8 }


moduleSwLoVersion OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The low part of the software version number. For
example, if the software version is 3.1, the value
of moduleSwLoVersion is 1."
	::= { moduleEntry 9 }


moduleStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	minorFault(3),
	majorFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The operational status of the module. If the 
status is not ok, the value of moduleTestResult 
gives more detailed information about the
module's failure condition(s)."
	::= { moduleEntry 10 }


moduleTestResult OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The result of the module's self test. A zero
indicates that the module passed all tests. Bits
set in the result indicate error conditions."
	::= { moduleEntry 11 }


moduleAction OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	reset(2),
	enable(3),
	disable(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object, when read, returns one of the
following results:
other(1):   module permanently enabled
enable(3):  module currently enabled
disable(4): module currently disabled
Setting this object to one of the acceptable 
values gives the following results:
other(1):  gives an error
reset(2):  resets the module's control logic
enable(3): if the module status is configurable,
enables the module, else gives error
disable(4): if the module status is 
configurable, disables the module, 
else gives error.
Setting this object to any other values results in
an error."
	::= { moduleEntry 12 }


moduleName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A descriptive string used by the network
administrator to name the module."
	::= { moduleEntry 13 }


moduleNumPorts OBJECT-TYPE
	SYNTAX INTEGER (0..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of ports supported by the module."
	::= { moduleEntry 14 }


modulePortStatus OBJECT-TYPE
	SYNTAX OCTET STRING
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A series of bytes containing status information
about the module and each of the ports on the 
module.
The first byte contains the status for the module
(same value as moduleStatus), and subsequent bytes
contain status for the first through the last 
ports on the module (same value as 
portOperStatus)."
	::= { moduleEntry 15 }


moduleSubType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	empty(2),
	wsf5510(3),
	wsf5511(4),
	wsx5304(6),
	wsf5520(7),
	wsf5521(8),
	wsf5531(9),
	wsf6020(100),
	wsf6020a(101),
	wsf6kpfc(102),
	wsf6kpfc2(103),
	wsf6kvpwr(104),
	wsf6kdfc(105),
	wsf6kpfc2a(106),
	wsf6kdfca(107),
	vsp300dfc(200),
	wsf6kpfc3a(201),
	wsf6kdfc3a(202)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of daughterboard attached to this 
module."
	::= { moduleEntry 16 }


moduleModel OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The manufacturer's model number for the module."
	::= { moduleEntry 17 }


moduleHwVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..12))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The hardware version of the module."
	::= { moduleEntry 18 }


moduleFwVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..40))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The firmware version of the module."
	::= { moduleEntry 19 }


moduleSwVersion OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..40))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The software version of the module."
	::= { moduleEntry 20 }


moduleStandbyStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	active(2),
	standby(3),
	error(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Redundant status of a module that supports 
redundancy."
	::= { moduleEntry 21 }


moduleIPAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If the module has a separate IP address to
reach it by, then it is reported here.
Otherwise, this object has a value of
'00000000H'."
	::= { moduleEntry 22 }


moduleIPAddressVlan OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If the moduleIPAddress is valid then this
object reports the VLAN to access that IP
address on. Otherwise this object has a value
of zero."
	::= { moduleEntry 23 }


moduleSubType2 OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	empty(2),
	wsu5531(3),
	wsu5533(5),
	wsu5534(6),
	wsu5535(7),
	wsu5536(8),
	wsu5537(9),
	wsu5538(10),
	wsu5539(11),
	wsg6488(102),
	wsg6489(103),
	wsg6483(104),
	wsg6485(105),
	wsu4504fxmt(314),
	wsu4502gb(315),
	wssvcidsupg(402),
	wssup720(1001)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of daughterboard attached to this 
module."
	::= { moduleEntry 24 }


moduleSlotNum OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This value is determined by the chassis slot 
number where the module is located. Valid entries 
are 1 to the value of chassisNumSlots"
	::= { moduleEntry 25 }


moduleSerialNumberString OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The serial number of the module. This MIB object
will return the module serial number for any 
module that either a numeric or an alphanumeric 
serial number is being used."
	::= { moduleEntry 26 }


moduleEntPhysicalIndex OBJECT-TYPE
	SYNTAX PhysicalIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of the instance of the entPhysicalIndex
object, defined in ENTITY-MIB, for the entity
physical index corresponding to this module."
	::= { moduleEntry 27 }


moduleAdditionalStatus OBJECT-TYPE
	SYNTAX OCTET STRING {
	fruInstalled(0),
	powerDenied(1),
	faulty(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The additional status of the module.

fruInstalled(0) indicates that whether or not
FRU is installed on the module.

powerDenied(1) indicates that whether phones
connected to the ports of this module are
denied of power.

faulty(2) indicates hardware faulty."
	::= { moduleEntry 28 }


portTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of port entries. The number of entries is
determined by the number of modules in the chassis
and the number of ports on each module."
	::= { portGrp 1 }


portEntry OBJECT-TYPE
	SYNTAX PortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing information for a particular 
port on a module."
	INDEX { portModuleIndex , portIndex }

	::= { portTable 1 }

portEntry ::=
	SEQUENCE {
		portModuleIndex INTEGER,
		portIndex INTEGER,
		portCrossIndex INTEGER,
		portName DisplayString,
		portType INTEGER,
		portOperStatus INTEGER,
		portCrossGroupIndex INTEGER,
		portAdditionalStatus INTEGER,
		portAdminSpeed INTEGER,
		portDuplex INTEGER,
		portIfIndex INTEGER,
		portSpantreeFastStart INTEGER,
		portAdminRxFlowControl INTEGER,
		portOperRxFlowControl INTEGER,
		portAdminTxFlowControl INTEGER,
		portOperTxFlowControl INTEGER,
		portMacControlTransmitFrames Counter32,
		portMacControlReceiveFrames Counter32,
		portMacControlPauseTransmitFrames Counter32,
		portMacControlPauseReceiveFrames Counter32,
		portMacControlUnknownProtocolFrames Counter32,
		portLinkFaultStatus INTEGER,
		portAdditionalOperStatus BITS,
		portInlinePowerDetect TruthValue,
		portEntPhysicalIndex PhysicalIndex,
		portErrDisableTimeOutEnable INTEGER
		}

portModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located."
	::= { portEntry 1 }


portIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module. The value is determined by the
location of the port on the module. Valid entries
are 1 to the value of moduleNumPorts for this
module."
	::= { portEntry 2 }


portCrossIndex OBJECT-TYPE
	SYNTAX INTEGER (1..4080)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A cross-reference to the port's index within 
another mib group. The value is dependent on the 
type of port. For an FDDI port, this corresponds 
to the snmpFddiPORTIndex."
	::= { portEntry 3 }


portName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A descriptive string used by the network
administrator to name the port."
	::= { portEntry 4 }


portType OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	cddi(2),
	fddi(3),
	tppmd(4),
	mlt3(5),
	sddi(6),
	smf(7),
	e10BaseT(8),
	e10BaseF(9),
	scf(10),
	e100BaseTX(11),
	e100BaseT4(12),
	e100BaseF(13),
	atmOc3mmf(14),
	atmOc3smf(15),
	atmOc3utp(16),
	e100BaseFsm(17),
	e10a100BaseTX(18),
	mii(19),
	vlanRouter(20),
	remoteRouter(21),
	tokenring(22),
	atmOc12mmf(23),
	atmOc12smf(24),
	atmDs3(25),
	tokenringMmf(26),
	e1000BaseLX(27),
	e1000BaseSX(28),
	e1000BaseCX(29),
	networkAnalysis(30),
	e1000Empty(31),
	e1000BaseLH(32),
	e1000BaseT(33),
	e1000UnsupportedGbic(34),
	e1000BaseZX(35),
	depi2(36),
	t1(37),
	e1(38),
	fxs(39),
	fxo(40),
	transcoding(41),
	conferencing(42),
	atmOc12mm(43),
	atmOc12smi(44),
	atmOc12sml(45),
	posOc12mm(46),
	posOc12smi(47),
	posOc12sml(48),
	posOc48sms(49),
	posOc48smi(50),
	posOc48sml(51),
	posOc3mm(52),
	posOc3smi(53),
	posOc3sml(54),
	intrusionDetect(55),
	e10GBaseCPX(56),
	e10GBaseLX4(57),
	e10GBaseEX4(59),
	e10GEmpty(60),
	e10a100a1000BaseT(61),
	dptOc48mm(62),
	dptOc48smi(63),
	dptOc48sml(64),
	e10GBaseLR(65),
	chOc12smi(66),
	chOc12mm(67),
	chOc48ss(68),
	chOc48smi(69),
	e10GBaseSX4(70),
	e10GBaseER(71),
	contentEngine(72),
	ssl(73),
	firewall(74),
	vpnIpSec(75),
	ct3(76),
	e1000BaseCwdm1470(77),
	e1000BaseCwdm1490(78),
	e1000BaseCwdm1510(79),
	e1000BaseCwdm1530(80),
	e1000BaseCwdm1550(81),
	e1000BaseCwdm1570(82),
	e1000BaseCwdm1590(83),
	e1000BaseCwdm1610(84),
	e1000BaseBT(85),
	e1000BaseUnapproved(86),
	chOc3smi(87),
	mcr(88),
	coe(89),
	mwa(90),
	psd(91),
	e100BaseLX(92),
	lwa(100),
	aons(101),
	e1000BaseUnknown(1000),
	e10GBaseUnknown(1001),
	e10GBaseUnapproved(1002),
	e1000BaseWdmRxOnly(1003),
	e1000BaseDwdm3033(1004),
	e1000BaseDwdm3112(1005),
	e1000BaseDwdm3190(1006),
	e1000BaseDwdm3268(1007),
	e1000BaseDwdm3425(1008),
	e1000BaseDwdm3504(1009),
	e1000BaseDwdm3582(1010),
	e1000BaseDwdm3661(1011),
	e1000BaseDwdm3819(1012),
	e1000BaseDwdm3898(1013),
	e1000BaseDwdm3977(1014),
	e1000BaseDwdm4056(1015),
	e1000BaseDwdm4214(1016),
	e1000BaseDwdm4294(1017),
	e1000BaseDwdm4373(1018),
	e1000BaseDwdm4453(1019),
	e1000BaseDwdm4612(1020),
	e1000BaseDwdm4692(1021),
	e1000BaseDwdm4772(1022),
	e1000BaseDwdm4851(1023),
	e1000BaseDwdm5012(1024),
	e1000BaseDwdm5092(1025),
	e1000BaseDwdm5172(1026),
	e1000BaseDwdm5252(1027),
	e1000BaseDwdm5413(1028),
	e1000BaseDwdm5494(1029),
	e1000BaseDwdm5575(1030),
	e1000BaseDwdm5655(1031),
	e1000BaseDwdm5817(1032),
	e1000BaseDwdm5898(1033),
	e1000BaseDwdm5979(1034),
	e1000BaseDwdm6061(1035),
	e10GBaseWdmRxOnly(1036),
	e10GBaseDwdm3033(1037),
	e10GBaseDwdm3112(1038),
	e10GBaseDwdm3190(1039),
	e10GBaseDwdm3268(1040),
	e10GBaseDwdm3425(1041),
	e10GBaseDwdm3504(1042),
	e10GBaseDwdm3582(1043),
	e10GBaseDwdm3661(1044),
	e10GBaseDwdm3819(1045),
	e10GBaseDwdm3898(1046),
	e10GBaseDwdm3977(1047),
	e10GBaseDwdm4056(1048),
	e10GBaseDwdm4214(1049),
	e10GBaseDwdm4294(1050),
	e10GBaseDwdm4373(1051),
	e10GBaseDwdm4453(1052),
	e10GBaseDwdm4612(1053),
	e10GBaseDwdm4692(1054),
	e10GBaseDwdm4772(1055),
	e10GBaseDwdm4851(1056),
	e10GBaseDwdm5012(1057),
	e10GBaseDwdm5092(1058),
	e10GBaseDwdm5172(1059),
	e10GBaseDwdm5252(1060),
	e10GBaseDwdm5413(1061),
	e10GBaseDwdm5494(1062),
	e10GBaseDwdm5575(1063),
	e10GBaseDwdm5655(1064),
	e10GBaseDwdm5817(1065),
	e10GBaseDwdm5898(1066),
	e10GBaseDwdm5979(1067),
	e10GBaseDwdm6061(1068),
	e1000BaseBX10D(1069),
	e1000BaseBX10U(1070),
	e100BaseUnknown(1071),
	e100BaseUnapproved(1072),
	e100BaseSX(1073),
	e100BaseBX10D(1074),
	e100BaseBX10U(1075)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of physical layer medium dependent
interface on the port."
	::= { portEntry 5 }


portOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	ok(2),
	minorFault(3),
	majorFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current operational status of the port."
	::= { portEntry 6 }


portCrossGroupIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A cross-reference to another mib group for this
port. The value is dependent on the type of port.
For an FDDI port this corresponds to the
snmpFddiPORTSMTIndex."
	::= { portEntry 7 }


portAdditionalStatus OBJECT-TYPE
	SYNTAX INTEGER (0..7)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Additional status information for the port. The
value is a sum. It initially takes the value zero,
then for each state that is true, 2 raised to a
power is added to the sum. The powers are 
according to the following table:
State    Power
Transmit    0
Receive    1
Collision    2
Transmit state indicates that at least one packet
was transmitted by the port in the last polling 
period. Receive state indicates that at least one 
packet was received by the port in the last 
polling period. Collision state indicates that 
at least one collision was detected on the port
in the last polling period.
Note that if a state is not applicable to a
particular port or additional status is not 
supported on a particular port, its value is 
always false for that port."
	::= { portEntry 8 }


portAdminSpeed OBJECT-TYPE
	SYNTAX INTEGER {
	autoDetect(1),
	s4000000(4000000),
	s10000000(10000000),
	s16000000(16000000),
	s45000000(45000000),
	s64000000(64000000),
	s100000000(100000000),
	s155000000(155000000),
	s400000000(400000000),
	s622000000(622000000),
	s1000000000(1000000000),
	s1544000(1544000),
	s2000000(2000000),
	s2048000(2048000),
	s64000(64000),
	s10G(10)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The desired speed of the port.
The current operational speed of the port can be
determined from ifSpeed."
	::= { portEntry 9 }


portDuplex OBJECT-TYPE
	SYNTAX INTEGER {
	half(1),
	full(2),
	disagree(3),
	auto(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the port is operating in half-
duplex, full-duplex, disagree or auto negotiation
mode. If the port could not agree with the far end
on port duplex, the port will be in disagree(3) 
mode."
	::= { portEntry 10 }


portIfIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding
to this port."
	::= { portEntry 11 }


portSpantreeFastStart OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the port is operating in 
spantree fast start mode. A port with fast start 
enabled is immediately put in spanning tree 
forwarding state on link up, rather than starting 
in blocking state which is the normal operation.
This is useful when the port is known to be 
connected to a single station which has problems 
waiting for the normal spanning tree operation to 
put the port in forwarding state."
	::= { portEntry 12 }


portAdminRxFlowControl OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2),
	desired(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the receive flow control administrative
status set on the port. If the status is set to 
on(1), the port will require the far end to send 
flow control. If the status is set to off(2), the 
port will not allow far end to send flow control. 
If the status is set to desired(3), the port will 
allow the far end to send the flow control."
	::= { portEntry 13 }


portOperRxFlowControl OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2),
	disagree(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the receive flow control operational
status of the port. If the port could not agree
with the far end on a link protocol, its 
operational status will be disagree(3)."
	::= { portEntry 14 }


portAdminTxFlowControl OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2),
	desired(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the transmit flow control 
administrative status set on the port. 
If the status is set to on(1), the port will send 
flow control to the far end.
If the status is set to off(2), the port will not
send flow control to the far end. If the status is
set to desired(3), the port will send flow control
to the far end if the far end supports it."
	::= { portEntry 15 }


portOperTxFlowControl OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2),
	disagree(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the transmit flow control operational
status of the port. If the port could not agree
with the far end on a link protocol, its
operational status will be disagree(3)."
	::= { portEntry 16 }


portMacControlTransmitFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of MAC control frames passed to
the MAC sublayer for transmission."
	::= { portEntry 17 }


portMacControlReceiveFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of MAC control frames passed by
the MAC sublayer to the MAC Control sublayer on
receive."
	::= { portEntry 18 }


portMacControlPauseTransmitFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of PAUSE frames passed to
the MAC sublayer for transmission."
	::= { portEntry 19 }


portMacControlPauseReceiveFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of PAUSE frames passed by
the MAC sublayer to the MAC Control sublayer
on receive."
	::= { portEntry 20 }


portMacControlUnknownProtocolFrames OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of MAC Control frames received
with an opcode that is not supported by the
device."
	::= { portEntry 21 }


portLinkFaultStatus OBJECT-TYPE
	SYNTAX INTEGER {
	noFault(1),
	nearEndFault(2),
	nearEndConfigFail(3),
	farEndDisable(4),
	farEndFault(5),
	farEndConfigFail(6),
	notApplicable(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Specifies additional link fault status on a 
gigabit link.

noFault:
Link is up and operational.
nearEndFault:
The port is enabled but there is no GBIC
present or the local port cannot 
synchronize with the remote end.
nearEndConfigFail:
The local port has detected a 
configuration mismatch with the remote 
end.
farEndDisable:
The far end is in the disabled state.
farEndFault:
The remote port is cannot synchronize.
farEndConfigFail:
The remote port has detected a 
configuration mismatch with the local end.
notApplicable:
Link fault status is not applicable on 
this port."
	::= { portEntry 22 }


portAdditionalOperStatus OBJECT-TYPE
	SYNTAX OCTET STRING {
	other(0),
	connected(1),
	standby(2),
	faulty(3),
	notConnected(4),
	inactive(5),
	shutdown(6),
	dripDis(7),
	disabled(8),
	monitor(9),
	errdisable(10),
	linkFaulty(11),
	onHook(12),
	offHook(13),
	reflector(14)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current operational status of the port which 
is showing additional detailed information of the 
port."
	::= { portEntry 23 }


portInlinePowerDetect OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicate if the port detects an inline power capable
device connected to it."
	::= { portEntry 24 }


portEntPhysicalIndex OBJECT-TYPE
	SYNTAX PhysicalIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of the instance of the entPhysicalIndex
object, defined in ENTITY-MIB, for the
entity physical index corresponding to this port."
	::= { portEntry 25 }


portErrDisableTimeOutEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether a port that is put into 
errdisable state by a cause as specified by
sysErrDisableTimeoutEnable will be re-enabled 
automatically during the timeout interval as 
specified by sysErrDisableTimeoutInterval."
	::= { portEntry 26 }


tftpHost OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Name of source/destination host for the TFTP
transfer or storage device transfer. If the name
is for the TFTP transfer, it can be the IP 
address or the host name. If the name for the 
storage device transfer, it will be in the format
of deviceName: (e.g. slot0:, slot1:)."
	::= { tftpGrp 1 }


tftpFile OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Name of file for the TFTP transfer or for storage
device transfer."
	::= { tftpGrp 2 }


tftpModule OBJECT-TYPE
	SYNTAX INTEGER (0..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Which module's code/configuration is being
transferred."
	::= { tftpGrp 3 }


tftpAction OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	downloadConfig(2),
	uploadConfig(3),
	downloadSw(4),
	uploadSw(5),
	downloadFw(6),
	uploadFw(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this object to one of the acceptable 
values initiates the requested action using the 
information given in tftpHost, tftpFile, 
tftpModule.

downloadConfig(2): receive configuration from
host/file
uploadConfig(3)  : send configuration to 
host/file
downloadSw(4)    : receive software image from
host/file
uploadSw(5)      : send software image to 
host/file
downloadFw(6)    : receive firmware image from
host/file
uploadFw(7)      : send firmware image to 
host/file
Setting this object to any other value results in
an error."
	::= { tftpGrp 4 }


tftpResult OBJECT-TYPE
	SYNTAX INTEGER {
	inProgress(1),
	success(2),
	noResponse(3),
	tooManyRetries(4),
	noBuffers(5),
	noProcesses(6),
	badChecksum(7),
	badLength(8),
	badFlash(9),
	serverError(10),
	userCanceled(11),
	wrongCode(12),
	fileNotFound(13),
	invalidTftpHost(14),
	invalidTftpModule(15),
	accessViolation(16),
	unknownStatus(17),
	invalidStorageDevice(18),
	insufficientSpaceOnStorageDevice(19),
	insufficientDramSize(20),
	incompatibleImage(21)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Contains result of the last tftp action request."
	::= { tftpGrp 5 }


brouterEnableRip OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the RIP protocol is enabled."
	::= { brouterGrp 1 }


brouterEnableSpantree OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates if Spanning Tree protocol is enabled."
	::= { brouterGrp 2 }


brouterEnableGiantCheck OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether special handling of giant 
packets is enabled."
	::= { brouterGrp 3 }


brouterEnableIpFragmentation OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether IP fragmentation is enabled."
	::= { brouterGrp 4 }


brouterEnableUnreachables OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether ICMP unreachable messages are
sent by the system."
	::= { brouterGrp 5 }


brouterCamAgingTime OBJECT-TYPE
	SYNTAX INTEGER (0..1000000)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The aging time for the CAM table. This duplicate
item is the same value as dot1dTpAgingTime."
	::= { brouterGrp 6 }


brouterCamMode OBJECT-TYPE
	SYNTAX INTEGER {
	filtering(1),
	forwarding(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Mode in which the CAM module is operating."
	::= { brouterGrp 7 }


brouterIpxSnapToEther OBJECT-TYPE
	SYNTAX INTEGER {
	snap(1),
	ethernetII(2),
	iso8023(3),
	raw8023(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The default translation for IPX packets when
bridging from FDDI SNAP to Ethernet."
	::= { brouterGrp 8 }


brouterIpx8023RawToFddi OBJECT-TYPE
	SYNTAX INTEGER {
	snap(1),
	iso8022(5),
	fddiRaw(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The default translation for IPX packets when
bridging from Ethernet 802.3 Raw to FDDI."
	::= { brouterGrp 9 }


brouterEthernetReceiveMax OBJECT-TYPE
	SYNTAX INTEGER (1..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of Ethernet receive buffers
processed at one time per port."
	::= { brouterGrp 10 }


brouterEthernetTransmitMax OBJECT-TYPE
	SYNTAX INTEGER (1..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of Ethernet transmit buffers
processed at one time per port."
	::= { brouterGrp 11 }


brouterFddiReceiveMax OBJECT-TYPE
	SYNTAX INTEGER (1..512)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of FDDI receive buffers processed
at one time per port."
	::= { brouterGrp 12 }


brouterFddiTransmitMax OBJECT-TYPE
	SYNTAX INTEGER (1..512)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of FDDI transmit buffers processed
at one time per port."
	::= { brouterGrp 13 }


brouterPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF BrouterPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of brouter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each 
module."
	::= { brouterGrp 14 }


brouterPortEntry OBJECT-TYPE
	SYNTAX BrouterPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing bridge/router information for a
particular port on a module."
	INDEX { brouterPortModule , brouterPort }

	::= { brouterPortTable 1 }

brouterPortEntry ::=
	SEQUENCE {
		brouterPortModule INTEGER,
		brouterPort INTEGER,
		brouterPortIpVlan VlanIndex,
		brouterPortIpAddr IpAddress,
		brouterPortNetMask IpAddress,
		brouterPortBroadcast IpAddress,
		brouterPortBridgeVlan INTEGER,
		brouterPortIpHelpers OCTET STRING
		}

brouterPortModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module index where this port is located."
	::= { brouterPortEntry 1 }


brouterPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { brouterPortEntry 2 }


brouterPortIpVlan OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP Virtual LAN to which this port belongs."
	::= { brouterPortEntry 3 }


brouterPortIpAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's IP address."
	::= { brouterPortEntry 4 }


brouterPortNetMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's subnet mask."
	::= { brouterPortEntry 5 }


brouterPortBroadcast OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's broadcast address."
	::= { brouterPortEntry 6 }


brouterPortBridgeVlan OBJECT-TYPE
	SYNTAX INTEGER (0..1023)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The bridge Virtual LAN to which this port 
belongs."
	::= { brouterPortEntry 7 }


brouterPortIpHelpers OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of which other Virtual LANs UDP/IP
broadcasts received on this port will be forwarded
to. The normal situation is broadcasts NOT 
forwarded beyond the originating VLAN, but it can 
be useful in certain circumstances. This is an 
octet string value with bits set to indicate 
forwarded to VLANs. It can be interpreted as a sum
of f(x) as x goes from 0 to 1023, where f(x) = 0 
for no forwarding to VLAN x and f(x) = exp(2, x) 
for VLAN x forwarded to. If all bits are 0 or the 
octet string is zero length, then UDP/IP
broadcasts are not being forwarded to other 
VLANs."
	::= { brouterPortEntry 8 }


brouterIpx8022ToEther OBJECT-TYPE
	SYNTAX INTEGER {
	snap(1),
	ethernetII(2),
	iso8023(3),
	raw8023(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The default translation for IPX packets when
bridging from FDDI 802.2 to Ethernet."
	::= { brouterGrp 15 }


brouterEnableTransitEncapsulation OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether Ethernet packets are 
encapsulated on FDDI via transit encapsulation 
protocol. Normally this option would be disabled
to allow translational bridging between Ethernet
and FDDI to take place."
	::= { brouterGrp 16 }


brouterEnableFddiCheck OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether MAC addresses learned one side
of a translational bridge should not be allowed to
be learned on the other side of the bridge. The
presence certain misbehaving devices on the 
network may require this option to be enabled."
	::= { brouterGrp 17 }


brouterEnableAPaRT OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the Automatic Packet 
Recognition and Translation feature is enabled on
translational bridge(s) in the box. If APaRT is
disabled, the default translations as defined by
the objects brouterIpx8022ToEther, 
brouterIpx8023RawToFddi, brouterIpxSnapToEther,
etc, are used on all packets and no automatic 
learning of translation information is performed."
	::= { brouterGrp 18 }


filterMacTable OBJECT-TYPE
	SYNTAX SEQUENCE OF FilterMacEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of filter mac entries."
	::= { filterGrp 1 }


filterMacEntry OBJECT-TYPE
	SYNTAX FilterMacEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing MAC address filter information."
	INDEX { filterMacModule , filterMacPort, filterMacAddress }

	::= { filterMacTable 1 }

filterMacEntry ::=
	SEQUENCE {
		filterMacModule INTEGER,
		filterMacPort INTEGER,
		filterMacAddress MacAddress,
		filterMacType INTEGER
		}

filterMacModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { filterMacEntry 1 }


filterMacPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { filterMacEntry 2 }


filterMacAddress OBJECT-TYPE
	SYNTAX MacAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A MAC address. If the source or destination MAC
address equals this value, a match occurs. The
packet is dropped if a match occurs and deny(1)
was specified. The packet is dropped if a match
doesn't occur and at least one MAC address filter
was specified with permit(3)."
	::= { filterMacEntry 3 }


filterMacType OBJECT-TYPE
	SYNTAX INTEGER {
	deny(1),
	invalid(2),
	permit(3),
	permitSrc(4),
	permitDst(5),
	denySrc(6),
	denyDst(7),
	denySrcLearn(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this object to invalid(2) removes the
corresponding entry from the filterMacTable.
To add a new entry to the filterMacTable, set this
object to deny(1) or any value from permit(3) to
denySrcLearn(8) for a module, port, and MAC
address not already in the table."
	::= { filterMacEntry 4 }


filterVendorTable OBJECT-TYPE
	SYNTAX SEQUENCE OF FilterVendorEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of filter vendor ID entries."
	::= { filterGrp 2 }


filterVendorEntry OBJECT-TYPE
	SYNTAX FilterVendorEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing vendor ID filter information."
	INDEX { filterVendorModule , filterVendorPort, filterVendorId }

	::= { filterVendorTable 1 }

filterVendorEntry ::=
	SEQUENCE {
		filterVendorModule INTEGER,
		filterVendorPort INTEGER,
		filterVendorId VendorIdType,
		filterVendorType INTEGER
		}

filterVendorModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { filterVendorEntry 1 }


filterVendorPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { filterVendorEntry 2 }


filterVendorId OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(3))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The vendor ID portion of a MAC address. If the
source or destination MAC address has the same
vendor ID, a match occurs. The packet is dropped
if a match occurs and deny(1) was specified. The
packet is dropped if a match doesn't occur and at
least one Vendor ID filter was specified with
permit(3)."
	::= { filterVendorEntry 3 }


filterVendorType OBJECT-TYPE
	SYNTAX INTEGER {
	deny(1),
	invalid(2),
	permit(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this object to invalid(2) removes the
corresponding entry from the filterVendorTable.
To add a new entry to the filterVendorTable, set
this object to deny(1) or permit(3) for a module,
port, and vendor ID not already in the table."
	::= { filterVendorEntry 4 }


filterProtocolTable OBJECT-TYPE
	SYNTAX SEQUENCE OF FilterProtocolEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of filter protocol entries."
	::= { filterGrp 3 }


filterProtocolEntry OBJECT-TYPE
	SYNTAX FilterProtocolEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing PROTOCOL address filter
information."
	INDEX { filterProtocolModule , filterProtocolPort, filterProtocolValue }

	::= { filterProtocolTable 1 }

filterProtocolEntry ::=
	SEQUENCE {
		filterProtocolModule INTEGER,
		filterProtocolPort INTEGER,
		filterProtocolValue INTEGER,
		filterProtocolType INTEGER
		}

filterProtocolModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { filterProtocolEntry 1 }


filterProtocolPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { filterProtocolEntry 2 }


filterProtocolValue OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A 16-bit protocol value. If the packet's type
field or the packet's DSAP/SSAP field is equal to
this value, a match occurs. The packet is dropped
if a match occurs and deny(1) was specified. The
packet is dropped if a match doesn't occur and at
least one protocol type filter was specified with
permit(3)."
	::= { filterProtocolEntry 3 }


filterProtocolType OBJECT-TYPE
	SYNTAX INTEGER {
	deny(1),
	invalid(2),
	permit(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this object to invalid(2) removes the
corresponding entry from the filterProtocolTable.
To add a new entry to the filterProtocolTable, set
this object to deny(1) or permit(3) for a module,
port, and protocol value not already in the
table."
	::= { filterProtocolEntry 4 }


filterTestTable OBJECT-TYPE
	SYNTAX SEQUENCE OF FilterTestEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of filter test entries."
	::= { filterGrp 4 }


filterTestEntry OBJECT-TYPE
	SYNTAX FilterTestEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing test filter information."
	INDEX { filterTestModule , filterTestPort, filterTestIndex }

	::= { filterTestTable 1 }

filterTestEntry ::=
	SEQUENCE {
		filterTestModule INTEGER,
		filterTestPort INTEGER,
		filterTestIndex INTEGER,
		filterTestType INTEGER,
		filterTestOffset INTEGER,
		filterTestValue INTEGER,
		filterTestMask INTEGER
		}

filterTestModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the
module where this port is located 
(see portModuleIndex)."
	::= { filterTestEntry 1 }


filterTestPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { filterTestEntry 2 }


filterTestIndex OBJECT-TYPE
	SYNTAX INTEGER (1..8)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies a test
for a particular module/port."
	::= { filterTestEntry 3 }


filterTestType OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this object to invalid(2) removes the
corresponding entry from the filterTestTable. To
add a new entry to the filterTestTable, set this
object to valid(1) for a module, port, and test
index not already in the table."
	::= { filterTestEntry 4 }


filterTestOffset OBJECT-TYPE
	SYNTAX INTEGER (0..4500)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A byte offset into packet. Must be a 32-bit word
aligned offset, i.e. 0, 4, 8, etc."
	::= { filterTestEntry 5 }


filterTestValue OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A 32-bit value to be compared against the packet
location specified by filterTestOffset."
	::= { filterTestEntry 6 }


filterTestMask OBJECT-TYPE
	SYNTAX INTEGER (0..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A 32-bit value to be bitwise ANDed with the 
packet location specified by filterTestOffset 
before  being compared to filterTestValue."
	::= { filterTestEntry 7 }


filterPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF FilterPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of filter port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each 
module."
	::= { filterGrp 5 }


filterPortEntry OBJECT-TYPE
	SYNTAX FilterPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing filter information for a
particular port on a module."
	INDEX { filterPortModule , filterPort }

	::= { filterPortTable 1 }

filterPortEntry ::=
	SEQUENCE {
		filterPortModule INTEGER,
		filterPort INTEGER,
		filterPortComplex DisplayString,
		filterPortBroadcastThrottle INTEGER,
		filterPortBroadcastThreshold INTEGER,
		filterPortBroadcastDiscards Counter32,
		filterPortBroadcastThresholdFraction INTEGER,
		filterPortSuppressionOption BITS,
		filterPortSuppressionViolation INTEGER
		}

filterPortModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { filterPortEntry 1 }


filterPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { filterPortEntry 2 }


filterPortComplex OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..50))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A complex expression made up of the numbers 1
through 8 indicating test results from
filterTestIndex and using logical operators '&'
(and), '|' (or), '!' (not), and parenthesis. For
example: ((1 & 2) | !3). If this complex filter
matches a packet, it is dropped."
	::= { filterPortEntry 3 }


filterPortBroadcastThrottle OBJECT-TYPE
	SYNTAX INTEGER (0..150000)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of broadcast packets per 
second allowed on this port. If the number of 
incoming broadcast packets in a one second 
interval exceeds this amount, packets are 
dropped for the rest of the interval. If the 
capability exists, only broadcast packets should
be dropped. Otherwise, all packets are dropped 
during the suppression interval.

A value of 0 indicates broadcast packets should 
not be limited.

The ability to suppress broadcast packets in this
manner exists only on certain ports. If it does 
not exist on this port, attempts to write a value 
other than 0 are rejected.

This object also applies to multicast (and/or) 
unicast suppression when 
filterPortSuppressionOption is enabled."
	::= { filterPortEntry 4 }


filterPortBroadcastThreshold OBJECT-TYPE
	SYNTAX INTEGER (0..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the integer part of the maximum 
percentage of available bandwidth allowed for 
incoming traffic of the specific traffic types on 
this port. The associated object 
filterPortBroadcastThresholdFraction indicates the
fraction part of the maximum percentage of 
available bandwidth allowed for incoming traffic
of the specific traffic types on this port. Either
packets of the specific traffic types are dropped 
of the port is put into errdisable state depending
on the value of filterPortSuppressionViolation on
this port if the percentage of incoming traffic of
the specific traffic types would exceed this 
limit. The traffic types that are enabled for
this traffic suppression feature is indicated by 
filterPortBroadcastOption.

The maximum percentage for the combination of this
object value and the object value of
filterPortBroadcastThresholdFraction is 100.00
which indicates traffic of all traffic types
should not be limited.

The ability to suppress traffic in this manner 
exists only on certain ports. If it does not 
exist on this port, attempts to write a value of 
this object other than 100 are rejected.

On platforms where filterPortSuppressionOption 
object is not supported, this object only applies 
to broadcast suppression."
	::= { filterPortEntry 5 }


filterPortBroadcastDiscards OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of packets discarded due to traffic 
suppression on this port."
	::= { filterPortEntry 6 }


filterPortBroadcastThresholdFraction OBJECT-TYPE
	SYNTAX INTEGER (0..99)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the fraction part of the maximum 
percentage of available bandwidth allowed for 
incoming traffic of the specific traffic types on 
this port. The associated object 
filterPortBroadcastThreshold indicates the integer
part of the maximum percentage of available 
bandwidth allowed for incoming traffic of the 
specific traffic types on this port. Either
packets of the specific traffic types are dropped
or the port is put into errdisable state 
depending on the value of 
filterPortSuppressionViolation on this port if the
percentage of incoming traffic of the specific
traffic type would exceed this limit. The
traffic types that are enabled for this traffic 
suppression feature is indicated by 
filterPortBroadcastOption.

The maximum percentage for the combination
of this object value and the object value of
filterPortBroadcastThreshold is 100.00 which
indicates traffic of all traffic types should not
be limited.

The ability to suppress traffic in this manner
exists only on certain ports. If it does not exist
on this port, attempts to write a value of this 
object other than 100 are rejected.

On platforms where filterPortSuppressionOption 
object is not supported, this object only applies 
to broadcast suppression."
	::= { filterPortEntry 7 }


filterPortSuppressionOption OBJECT-TYPE
	SYNTAX OCTET STRING {
	multicast(0),
	unicast(1),
	broadcast(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the traffic types that traffic 
suppression feature is enabled for.

multicast(0) is set when multicast suppression is
enabled. unicast(1) is set when unicast 
suppression is enabled. broadcast(2) is set when 
broadcast suppression is enabled."
	::= { filterPortEntry 8 }


filterPortSuppressionViolation OBJECT-TYPE
	SYNTAX INTEGER {
	dropPackets(1),
	errdisable(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the action that will be taken on this
port when the percentage of either broadcast, 
multicast or unicast traffic exceeds the limit as
indicated by filterPortBroadcastThreshold and
filterPortBroadcastThresholdFraction.


dropPackets - the excessive packets will be
- dropped on this port.

errdisable - the port will be put into errdisable
- state.

The object is only supported on platforms that 
support this suppression violation action 
feature."
	::= { filterPortEntry 9 }


monitorSourceModule OBJECT-TYPE
	SYNTAX INTEGER (0..16)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index value that uniquely identifies the 
module where the monitoring source port is 
located. A value of 0 indicates that the 
monitorSourcePort is really a source Virtual LAN 
number. To monitor multiple source ports, this 
object should be set to 0 and 
monitorAdminSourcePorts should be configured."
	::= { monitorGrp 1 }


monitorSourcePort OBJECT-TYPE
	SYNTAX INTEGER (0..1023)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index value that uniquely identifies the
monitoring source port within a module or the
monitoring source Virtual LAN. To monitor multiple
source ports, this object should be set to 0 and
monitorAdminSourcePorts should be configured"
	::= { monitorGrp 2 }


monitorDestinationModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index value that uniquely identifies the 
module where the monitoring destination port is 
located."
	::= { monitorGrp 3 }


monitorDestinationPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index value that uniquely identifies the
monitoring destination port within a module."
	::= { monitorGrp 4 }


monitorDirection OBJECT-TYPE
	SYNTAX INTEGER {
	transmit(1),
	receive(2),
	transmitAndReceive(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The type of packets to be monitored at the source
port."
	::= { monitorGrp 5 }


monitorEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether port monitoring is in 
progress."
	::= { monitorGrp 6 }


monitorAdminSourcePorts OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates the administrative status of which 
ports are monitored. All the monitored ports have
to be non-trunking port and belong to the same 
Virtual LAN. The octet string contains one bit 
per port. Each bit within the octet string 
represents one port of the device. The ordering 
of ports represented within the octet string is 
in the same order as in the RFC 1493 
dot1dStpPortTable.

The bit value interpretation is as follows:
1 = being monitored
0 = not being monitored"
	::= { monitorGrp 7 }


monitorOperSourcePorts OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates which ports are actually being 
monitored. All the monitored ports have to be 
non-trunking port and belong to the same Virtual
LAN. The octet string contains one bit per port.
Each bit within the octet string represents one 
port of the device. The ordering of ports 
represented within the octet string is in the same
order as in the RFC 1493 dot1dStpPortTable.

The bit value interpretation is as follows:
1 = being monitored
0 = not being monitored"
	::= { monitorGrp 8 }


vlanTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VlanEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A list of Virtual LAN entries. The number of
entries is determined by the number of VLANs
supported by the system."
	::= { vlanGrp 2 }


vlanEntry OBJECT-TYPE
	SYNTAX VlanEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Entry containing information for a particular
Virtual LAN."
	INDEX { vlanIndex  }

	::= { vlanTable 1 }

vlanEntry ::=
	SEQUENCE {
		vlanIndex VlanIndex,
		vlanSpantreeEnable INTEGER,
		vlanIfIndex INTEGER
		}

vlanIndex OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index value that uniquely identifies the 
Virtual LAN associated with this information."
	::= { vlanEntry 1 }


vlanSpantreeEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	notApplicable(3)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether Spanning Tree protocol is
enabled for this Virtual LAN.

If the device only supports a single global
Spanning Tree PVST+ Protocol enable/disable
for all the existing VLANs, then the object
value assigned to this VLAN will be applied
to the object values of all the instances
in this table which do not have the value
of notApplicable(3)."
	::= { vlanEntry 2 }


vlanIfIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The value of the ifIndex object defined in 
MIB-II, for the interface corresponding to this 
VLAN."
	::= { vlanEntry 3 }


vlanPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VlanPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of Virtual LAN port entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each 
module."
	::= { vlanGrp 3 }


vlanPortEntry OBJECT-TYPE
	SYNTAX VlanPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing Virtual LAN information for a
particular port on a module."
	INDEX { vlanPortModule , vlanPort }

	::= { vlanPortTable 1 }

vlanPortEntry ::=
	SEQUENCE {
		vlanPortModule INTEGER,
		vlanPort INTEGER,
		vlanPortVlan VlanIndex,
		vlanPortIslVlansAllowed OCTET STRING,
		vlanPortSwitchLevel INTEGER,
		vlanPortIslAdminStatus INTEGER,
		vlanPortIslOperStatus INTEGER,
		vlanPortIslPriorityVlans OCTET STRING,
		vlanPortAdminStatus INTEGER,
		vlanPortOperStatus INTEGER,
		vlanPortAuxiliaryVlan INTEGER
		}

vlanPortModule OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { vlanPortEntry 1 }


vlanPort OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { vlanPortEntry 2 }


vlanPortVlan OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Virtual LAN to which this port belongs."
	::= { vlanPortEntry 3 }


vlanPortIslVlansAllowed OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of which Virtual LANs are allowed
on this Inter-Switch Link. This is an octet string
value with bits set to indicate allowed VLANs. It
can be interpreted as a sum of f(x) as x goes from
0 to 1023, where f(x) = 0 for VLAN x not allowed 
and f(x) = exp(2, x) for VLAN x allowed."
	::= { vlanPortEntry 5 }


vlanPortSwitchLevel OBJECT-TYPE
	SYNTAX INTEGER {
	normal(1),
	high(2),
	notApplicable(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the priority level the port uses to 
access the switching media. If vlanPortSwitchLevel
is not applicable to the port, notApplicable(3) 
will be returned by the device."
	::= { vlanPortEntry 6 }


vlanPortIslAdminStatus OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2),
	desirable(3),
	auto(4),
	onNoNegotiate(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the administrative status set on the
trunk port while the operational status is the one
that indicates whether the port is actually
trunking or not. If the status is set to off(2),
the port is permanently set to be a non-trunk. If
the status is set to onNoNegotiate(5), the port is
permanently set to be a trunk and no negotiation 
takes place with the far end to try to ensure 
consistent operation. If the status is set to 
on(1), the port initiates a request to become a 
trunk and will become a trunk regardless of the 
response from the far end. If the status is set to
desirable(3), the port initiates a request to 
become a trunk and will become a trunk if the far 
end agrees. If the status is set to auto(4), the
port does not initiate a request to become a trunk
but will do so if it receives a request to become
a trunk from the far end."
	::= { vlanPortEntry 7 }


vlanPortIslOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	trunking(1),
	notTrunking(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates if the port is actually trunking or
not. In the case of ISL capable ports, the status
depends on the success or failure of the 
negotiation process initiated by the port to 
become a trunk or non trunk.
In the case of 802.10 capable ports, it is 
directly related to the on/off administrative 
status."
	::= { vlanPortEntry 8 }


vlanPortIslPriorityVlans OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of which Virtual LANs have a better
dot1dStpPortPriority value. This object can be 
used to perform load balancing on Inter-Switch 
Links via spanning tree. An Inter-Switch Link has 
two dot1dStpPortPriority values which are shared
by all the Virtual LANs on the link. The Virtual
LANs indicated by this object have priority 
over the other Virtual LANs on the link.

This is an octet string value with bits set to 
indicate priority VLANs. It can be interpreted as
a sum of f(x) as x goes from 0 to 1023, where 
f(x) = 0 for a VLAN x which does not have priority
and f(x) = exp(2, x) for a VLAN x which has 
priority.

Setting the dot1dStpPortPriority value for any of 
the Virtual LANs indicated by this object causes
the dot1dStpPortPriority value for all the Virtual
LANs indicated by this object to be set to the
same value.

Setting the dot1dStpPortPriority value for any
other Virtual LAN causes the dot1dStpPortPriority
value for all other Virtual LANs to be set to the 
same value."
	::= { vlanPortEntry 9 }


vlanPortAdminStatus OBJECT-TYPE
	SYNTAX INTEGER {
	static(1),
	dynamic(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the port will get assigned to a
VLAN statically or dynamically. When it is set to
dynamic, the needed information will be accessed
from one of the Vlan Membership Policy Servers 
specified in the vmpsTable. Default value is 
static(1).
Note that vlanPortAdminStatus cannot be set to
dynamic(2) for a port which has 
portSecurityAdminStatus set to enabled(1) or for a
port which currently has a vlanPortIslOperStatus 
of trunking(1)."
	::= { vlanPortEntry 10 }


vlanPortOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	inactive(1),
	active(2),
	shutdown(3),
	vlanActiveFault(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of the current VLAN status of the 
port.
A status of inactive(1) indicates that a dynamic 
port does not yet have a VLAN assigned or that a 
static or dynamic port has been assigned a VLAN 
that is not currently active. A status of 
active(2) indicates that the currently assigned 
VLAN is active. A status of shutdown(3) indicates
that the port has been shutdown as a result of a 
VMPS response on a dynamic port.
A status of vlanActiveFault(4) only applies to 
tokenring ports and indicates that the port is 
operationally disabled because the TR-CRF VLAN of 
which the port is a member has active ports on 
another device and only ports on that remote 
device may participate in that TR-CRF VLAN."
	::= { vlanPortEntry 11 }


vlanPortAuxiliaryVlan OBJECT-TYPE
	SYNTAX INTEGER (0|1..1000|1025..4094|4095|4096)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The Voice Virtual Vlan ID (VVID) to which this
port belongs to.
If the VVID is not supported on the port, this MIB
object will not be configurable and will return 
4096.

Setting this MIB object to 4096, the CDP packets
transmitting through this port would not include
Appliance VLAN-ID TLV.

Setting this MIB object to 4095, the CDP packets
transmitting through this port would contain
Appliance VLAN-ID TLV with value of 4095 - VoIP
and related packets are expected to be sent and
received untagged without an 802.1p priority.

Setting this MIB object to 0, the CDP packets
transmitting through this port would contain
Appliance VLAN-ID TLV with value of 0 - VoIP
and related packets are expected to be sent and
received with VLAN-id=0 and an 802.1p priority.

Setting this MIB object to N (1..1000|1025..4094),
the CDP packets transmitting through this port 
would contain Appliance VLAN-ID TLV with N - VoIP
and related packets are expected to be sent and
received with VLAN-id=N and an 802.1p priority."
	::= { vlanPortEntry 12 }


vmpsTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VmpsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists a maximum of 3 IP addresses of
Vlan Membership Policy Servers."
	::= { vlanGrp 4 }


vmpsEntry OBJECT-TYPE
	SYNTAX VmpsEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A VMPS table entry."
	INDEX { vmpsAddr  }

	::= { vmpsTable 1 }

vmpsEntry ::=
	SEQUENCE {
		vmpsAddr IpAddress,
		vmpsType INTEGER
		}

vmpsAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a Vlan Membership Policy 
Server. To configure the internal VMPS, use the
same IP address as specified in sysIpAddr."
	::= { vmpsEntry 1 }


vmpsType OBJECT-TYPE
	SYNTAX INTEGER {
	invalid(1),
	primary(2),
	other(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add a new entry to the vmpsTable, set this
object to primary(2) or other(3) for an IP address
which is not already in the table. The primary 
entry will be used first, if it is reachable. 
Otherwise one of the other entries will be used.
Setting one entry to primary(2) causes any 
previous primary entry to change to other(3).
To remove an entry from the table, set this
object to invalid(1)."
	::= { vmpsEntry 2 }


vmpsAction OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	inProgress(2),
	success(3),
	noResponse(4),
	noPrimaryVmps(5),
	noDynamicPort(6),
	noHostConnected(7),
	reconfirm(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object, when read, returns the result of the
last action requested: other(1), inProgress(2),
success(3), noResponse(3), noPrimaryVmps(5),
noDynamicPort(6), or noHostConnected(7).

Setting this object to reconfirm(8) causes the
switch to contact the Vlan Membership Policy
Server immediately to reconfirm the current VLAN 
assignments for all dynamic ports on the switch.
Normally VLAN assignments for dynamic ports are 
reconfirmed once an hour."
	::= { vlanGrp 5 }


vmpsAccessed OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of the last Vlan Membership Policy
Server accessed. If there was no response from the
last VMPS request, the value returned is 0."
	::= { vlanGrp 6 }


vlanTrunkMappingMax OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of active configurable trunk VLAN
mapping entries allowed. A value of zero indicates
no limitation on the number of active configurable
trunk VLAN mapping."
	::= { vlanGrp 7 }


vlanTrunkMappingTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VlanTrunkMappingEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table contains zero or more rows of trunk
VLAN to VLAN associations. The maximum number of 
active entries is determined by 
vlanTrunkMappingMax.

VLAN above 1k can not be created if the value of
corresponding instance of vlanTrunkMappingType is
dot1qToisl(2)."
	::= { vlanGrp 8 }


vlanTrunkMappingEntry OBJECT-TYPE
	SYNTAX VlanTrunkMappingEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Information about the VLAN mapping of a 
particular trunk VLAN to another VLAN."
	INDEX { vlanTrunkMappingFromVlan  }

	::= { vlanTrunkMappingTable 1 }

vlanTrunkMappingEntry ::=
	SEQUENCE {
		vlanTrunkMappingFromVlan VlanIndex,
		vlanTrunkMappingToVlan VlanIndex,
		vlanTrunkMappingType INTEGER,
		vlanTrunkMappingOper TruthValue,
		vlanTrunkMappingStatus RowStatus
		}

vlanTrunkMappingFromVlan OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The VLAN with this VLAN ID will be mapped to the
VLAN in the corresponding instance of
vlanTrunkMappingToVlan in the device.

Agent returns inconsistentValue if this VLAN 
exists in the device.

Agent returns inconsistentValue if this VLAN is
not a reserved VLAN and the value of corresponding
instance of vlanTrunkMappingType is 
reservedToNonReserved(1).

Agent returns wrongValue if this VLAN is not a
valid 802.1Q VLAN and the value of corresponding
instance of vlanTrunkMappingType is 
dot1qToisl(2)."
	::= { vlanTrunkMappingEntry 1 }


vlanTrunkMappingToVlan OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The VLAN which the corresponding instance of
vlanTrunkMappingFromVlan will be mapped to.

Agent returns inconsistentValue if this VLAN 
exists in the device.

Agent returns inconsistentValue if this VLAN is a
reserved VLAN and the value of corresponding
instance of vlanTrunkMappingType is 
reservedToNonReserved(1).

Agent returns inconsistentValue if this VLAN is
not a valid ISL VLAN and the value of 
corresponding instance of vlanTrunkMappingType
is dot1qToisl(2)."
	::= { vlanTrunkMappingEntry 2 }


vlanTrunkMappingType OBJECT-TYPE
	SYNTAX INTEGER {
	reservedToNonReserved(1),
	dot1qToisl(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of this trunk VLAN mapping.

reservedToNonReserved(1)
An user defined association which maps a
reserved VLAN to a non-reserved VLAN.

dot1qToisl(2)
An user defined association which maps a VLAN
in 802.1q trunk to a VLAN in ISL trunk.

Implementations are allowed to restrict the 
available types for this object.

For devices which support the range of VlanIndex
between 1024 and 4095, the default value is
reservedToNonReserved(1).  The default value is
dot1qToisl(2) for devices which do not support the
range of VlanIndex between 1024 and 4095."
	::= { vlanTrunkMappingEntry 3 }


vlanTrunkMappingOper OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether this VLAN mapping is effective
or not."
	::= { vlanTrunkMappingEntry 4 }


vlanTrunkMappingStatus OBJECT-TYPE
	SYNTAX RowStatus
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of this trunk VLAN mapping.

Once a row becomes active, value in any other 
column within such row cannot be modified except
by setting vlanTrunkMappingStatus to 
notInService(2) for such row."
	::= { vlanTrunkMappingEntry 5 }


portSecurityTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortSecurityEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of port security entries. The number of 
entries is determined by the number of ports in
the system which support the Security feature."
	::= { securityGrp 1 }


portSecurityEntry OBJECT-TYPE
	SYNTAX PortSecurityEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing security information for a
particular port."
	INDEX { portSecurityModuleIndex , portSecurityPortIndex }

	::= { portSecurityTable 1 }

portSecurityEntry ::=
	SEQUENCE {
		portSecurityModuleIndex INTEGER,
		portSecurityPortIndex INTEGER,
		portSecurityAdminStatus INTEGER,
		portSecurityOperStatus INTEGER,
		portSecurityLastSrcAddr OCTET STRING,
		portSecuritySecureSrcAddr OCTET STRING,
		portSecurityMaxSrcAddr INTEGER,
		portSecurityAgingTime INTEGER,
		portSecurityShutdownTimeOut INTEGER,
		portSecurityViolationPolicy INTEGER
		}

portSecurityModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { portSecurityEntry 1 }


portSecurityPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { portSecurityEntry 2 }


portSecurityAdminStatus OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When security is enabled, source MAC addresses
are monitored for all packets received on the 
port. If an address is detected that does not 
match the portSecuritySecureSrcAddr and any 
corresponding portSecurityExtSecureSrcAddr, of 
which portSecurityExtModuleIndex and 
portSecurityExtPortIndex in the 
portSecurityExtTable is the same as the 
portSecurityModuleIndex and portSecurityPortIndex,
and the number of MAC address learned or 
configured for this port is equal to 
portSecurityMaxSrcAddr, the port will shutdown or
drop packets. If the 
portSecurityViolationPolicy is set to shutdown(2),
the port is shutdown and a linkDown trap is sent;
otherwise the port drops the invalid packets."
	::= { portSecurityEntry 3 }


portSecurityOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	notShutdown(1),
	shutdown(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of whether the port has been shut
down as a result of an insecure address being 
detected on a secure port."
	::= { portSecurityEntry 4 }


portSecurityLastSrcAddr OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The last source MAC address in a receive packet
seen on the port."
	::= { portSecurityEntry 5 }


portSecuritySecureSrcAddr OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The address to be compared with source MAC 
addresses of received packets when the 
portSecurityAdminStatus is enabled(1). Setting 
this value to 0.0.0.0.0.0 puts the port in 
learning mode so that the next source MAC 
address received by the port becomes the 
portSecuritySecureSrcAddr."
	::= { portSecurityEntry 6 }


portSecurityMaxSrcAddr OBJECT-TYPE
	SYNTAX INTEGER (1..1025)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number (N) of MAC address to be 
secured on the port. The first N MAC addresses
learned or configured are made secured. If the 
user wants to make the port secured for more than 
one MAC address, the portSecurityExtTable is used 
in addition to portSecuritySecureSrcAddr. If 
changing the maximum number N of Mac address to M,
which is smaller than N, some MAC addresses are 
removed. Setting this value to 1, 
the portSecurityExtTable will not be used for this
port and the corresponding entries for this port
will also be removed from portSecurityExtTable."
	::= { portSecurityEntry 7 }


portSecurityAgingTime OBJECT-TYPE
	SYNTAX INTEGER (0|10..1440)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The interval in which the port is secured. After
the expiration of the time, the corresponding
portSecuritySecureSrcAddr or 
portSecurityExtSecureSrcAddr will be removed from 
the secure address list. If the value of this 
object is 0, the aging mechanism is disabled."
	::= { portSecurityEntry 8 }


portSecurityShutdownTimeOut OBJECT-TYPE
	SYNTAX INTEGER (0|10..1440)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The interval in which the port is shutdown due to
the violation of security. After the expiration
of the time all the security configuration of this
port is re-installed and the port is enabled. If 
the value of this object is 0, the port is shut 
down permanently."
	::= { portSecurityEntry 9 }


portSecurityViolationPolicy OBJECT-TYPE
	SYNTAX INTEGER {
	restrict(1),
	shutdown(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If the value of this object is 
restrict(1)  - the port drops all packets with 
insecured addresses.
shutdown(2)  - the port is forced to shut down
if there is a violation of 
security."
	::= { portSecurityEntry 10 }


portSecurityExtTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortSecurityExtEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of port security entries. The number of
entries is determined by the number of ports in
the system which support the Security feature and 
the number of MAC addresses learned/configured to 
be secured per port."
	::= { securityGrp 2 }


portSecurityExtEntry OBJECT-TYPE
	SYNTAX PortSecurityExtEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing security information for a 
particular port and a particular MAC address. The 
entry can be configured by the user and can be 
added by the agent when the device learns a new 
secured MAC address."
	INDEX { portSecurityExtModuleIndex , portSecurityExtPortIndex, portSecurityExtSecureSrcAddr }

	::= { portSecurityExtTable 1 }

portSecurityExtEntry ::=
	SEQUENCE {
		portSecurityExtModuleIndex INTEGER,
		portSecurityExtPortIndex INTEGER,
		portSecurityExtSecureSrcAddr OCTET STRING,
		portSecurityExtControlStatus INTEGER
		}

portSecurityExtModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { portSecurityExtEntry 1 }


portSecurityExtPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { portSecurityExtEntry 2 }


portSecurityExtSecureSrcAddr OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the  MAC 
address, which is to be secured."
	::= { portSecurityExtEntry 3 }


portSecurityExtControlStatus OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object used to add or remove a secured 
MAC address of the corresponding port in
the row. If setting this object to valid(1), the 
portSecurityExtSecureSrcAddr is made to be secured
for the port. If setting this object to 
invalid(2), the portSecurityExtSecureSrcAddr is 
no longer to be secured for the current port."
	::= { portSecurityExtEntry 4 }


tokenRingPortTable OBJECT-TYPE
	SYNTAX SEQUENCE OF TokenRingPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Table containing token ring configuration 
information."
	::= { tokenRingGrp 1 }


tokenRingPortEntry OBJECT-TYPE
	SYNTAX TokenRingPortEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing token ring configuration
information for a particular port."
	INDEX { tokenRingModuleIndex , tokenRingPortIndex }

	::= { tokenRingPortTable 1 }

tokenRingPortEntry ::=
	SEQUENCE {
		tokenRingModuleIndex INTEGER,
		tokenRingPortIndex INTEGER,
		tokenRingPortSetACbits INTEGER,
		tokenRingPortMode INTEGER,
		tokenRingPortEarlyTokenRel INTEGER,
		tokenRingPortPriorityThresh INTEGER,
		tokenRingPortPriorityMinXmit INTEGER,
		tokenRingPortCfgLossThresh INTEGER,
		tokenRingPortCfgLossInterval INTEGER
		}

tokenRingModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { tokenRingPortEntry 1 }


tokenRingPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { tokenRingPortEntry 2 }


tokenRingPortSetACbits OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Specifies if the AC bits shall be set 
unconditionally when a port forwards certain LLC 
frames."
	::= { tokenRingPortEntry 3 }


tokenRingPortMode OBJECT-TYPE
	SYNTAX INTEGER {
	auto(1),
	fdxCport(2),
	fdxStation(3),
	hdxCport(4),
	hdxStation(5),
	riro(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Specifies the port's mode of operation.

auto:       Automatically detect the port mode 
upon insertion.

fdxCport:   Transmit Immediate (full-duplex)
Concentrator Port

fdxStation: Transmit Immediate (full-duplex)
Station emulation

hdxCport:   Token Passing Protocol (half-duplex)
Concentrator Port

hdxStation: Token Passing Protocol (half-duplex)
Station emulation

riro:       RingIn/RingOut mode. (wsx5031 only)"
	::= { tokenRingPortEntry 4 }


tokenRingPortEarlyTokenRel OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object provides the ability to enable or 
disable early token release for a particular port.

Early token release only applies to ports 
operating at 16 Mbps. If ifSpeed reflects 4 Mbps
for a particular port, then the corresponding 
instance of this object will have a value of 
disabled(2) regardless of attempts to set the 
object to enabled(1).

Whenever a port is opened with a ring speed of 
16 Mbps, by default, early token release will be 
enabled."
	::= { tokenRingPortEntry 9 }


tokenRingPortPriorityThresh OBJECT-TYPE
	SYNTAX INTEGER (0..7)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The highest token ring frame priority that shall
go to the low-priority transmit queue."
	::= { tokenRingPortEntry 10 }


tokenRingPortPriorityMinXmit OBJECT-TYPE
	SYNTAX INTEGER (0..6)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The minimum token priority that will be used for
transmit."
	::= { tokenRingPortEntry 11 }


tokenRingPortCfgLossThresh OBJECT-TYPE
	SYNTAX INTEGER (1..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of configuration loss events during the
sample interval which, if exceeded, should cause 
the port to be disabled. If the port is disabled 
by this function the port must be administratively
re-enabled."
	::= { tokenRingPortEntry 12 }


tokenRingPortCfgLossInterval OBJECT-TYPE
	SYNTAX INTEGER (1..9999)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The sampling interval, in minutes, for which the
port monitors to see if the configuration loss 
threshold has been exceeded."
	::= { tokenRingPortEntry 13 }


tokenRingDripDistCrfMode OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object reflects whether TR-CRFs can be
distributed across ISL topologies. Setting
this object to enabled(1) allows TR-CRFs to be
distributed. Setting this object to disabled(2)
prevents TR-CRFs from being distributed across
ISL topologies. When this object is set to
disabled(2), the system will disable ports
involved in the distributed TR-CRF."
	::= { tokenRingGrp 2 }


tokenRingDripAreReductionMode OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object reflects whether or not All
Routes Explorer (ARE) reduction capabilities are
enabled or disabled on this system. Setting
this object to enabled(1) will permit DRiP to
participate in the configuration of Token Ring
ports ARE reduction capabilities on the system.
Setting this object to disabled(2) will prevent
DRiP from participating in the configuration
of Token Ring port ARE reduction capabilities."
	::= { tokenRingGrp 3 }


tokenRingDripLocalNodeID OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The unique system identifier that will be sent
in all advertisements generated by this system.
It uniquely identifies this system from other
DRiP capable systems."
	::= { tokenRingGrp 4 }


tokenRingDripLastRevision OBJECT-TYPE
	SYNTAX INTEGER (0..9999999)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The revision number transmitted in the most
recent advertisement. That advertisement may
or may not have contained changed data."
	::= { tokenRingGrp 5 }


tokenRingDripLastChangedRevision OBJECT-TYPE
	SYNTAX INTEGER (0..9999999)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The revision number transmitted in the most
recent advertisement containing changed data."
	::= { tokenRingGrp 6 }


tokenRingDripAdvertsReceived OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of DRiP advertisements received
by this system."
	::= { tokenRingGrp 7 }


tokenRingDripAdvertsTransmitted OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of DRiP advertisements transmitted
by this system."
	::= { tokenRingGrp 8 }


tokenRingDripAdvertsProcessed OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of DRiP advertisements processed
by this system."
	::= { tokenRingGrp 9 }


tokenRingDripInputQueueDrops OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of DRiP advertisements dropped
from this system's input queue."
	::= { tokenRingGrp 10 }


tokenRingDripOutputQueueDrops OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of DRiP advertisements dropped
from this system's output queue."
	::= { tokenRingGrp 11 }


tokenRingDripLocalVlanStatusTable OBJECT-TYPE
	SYNTAX SEQUENCE OF TokenRingDripLocalVlanStatusEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing DRiP VLAN status information
local to this system. The existence of an
entry indicates that at least one local port
is assigned to the associated TR-CRF VLAN."
	::= { tokenRingGrp 12 }


tokenRingDripLocalVlanStatusEntry OBJECT-TYPE
	SYNTAX TokenRingDripLocalVlanStatusEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing DRiP related information for
a particular TR-CRF VLAN."
	INDEX { tokenRingDripVlan  }

	::= { tokenRingDripLocalVlanStatusTable 1 }

tokenRingDripLocalVlanStatusEntry ::=
	SEQUENCE {
		tokenRingDripVlan VlanIndex,
		tokenRingDripLocalPortStatus INTEGER,
		tokenRingDripRemotePortStatus INTEGER,
		tokenRingDripRemotePortConfigured INTEGER,
		tokenRingDripDistributedCrf INTEGER,
		tokenRingDripBackupCrf INTEGER,
		tokenRingDripOwnerNodeID OCTET STRING
		}

tokenRingDripVlan OBJECT-TYPE
	SYNTAX VlanIndex
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A TR-CRF VLAN ID."
	::= { tokenRingDripLocalVlanStatusEntry 1 }


tokenRingDripLocalPortStatus OBJECT-TYPE
	SYNTAX INTEGER {
	active(1),
	inactive(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object reflects DRiP's status regarding
the overall set of local ports assigned to
the TR-CRF VLAN associated with this entry.
A value of active(1) indicates that at least
one local port is inserted/connected (i.e.,
active on the Token Ring). A value of inactive(2)
indicates that none of the local ports are
inserted/connected. All local ports are either
disabled or are simply not connected."
	::= { tokenRingDripLocalVlanStatusEntry 2 }


tokenRingDripRemotePortStatus OBJECT-TYPE
	SYNTAX INTEGER {
	active(1),
	inactive(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object reflects DRiP's status regarding
any ports on remote systems. A value of
active(1) indicates that at least one remote
port is inserted/connected (i.e., active on
the Token Ring). A value of inactive(2) indicates
that none of the remote ports are 
inserted/connected. All remote ports are either 
disabled or are simply not connected."
	::= { tokenRingDripLocalVlanStatusEntry 3 }


tokenRingDripRemotePortConfigured OBJECT-TYPE
	SYNTAX INTEGER {
	true(1),
	false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object reflects whether or not DRiP has
detected remote ports assigned to the TR-CRF
VLAN associated with this entry. A value of
true(1) indicates there is at least one port
on a remote system assigned to this TR-CRF VLAN.
A value of false(2) indicates no remote ports
are assigned to this TR-CRF VLAN."
	::= { tokenRingDripLocalVlanStatusEntry 4 }


tokenRingDripDistributedCrf OBJECT-TYPE
	SYNTAX INTEGER {
	true(1),
	false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object reflects whether DRiP considers the
TR-CRF VLAN associated with this entry to be
distributed across systems. A value of true(1)
indicates the TR-CRF is distributed. A value
of false(2) indicates the TR-CRF is not 
distributed."
	::= { tokenRingDripLocalVlanStatusEntry 5 }


tokenRingDripBackupCrf OBJECT-TYPE
	SYNTAX INTEGER {
	true(1),
	false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This object reflects whether or not the TR-CRF
VLAN associated with this entry is configured
as a backup TR-CRF. A value of true(1) indicates
the TR-CRF is a configured as a backup. A value
of false(2) indicates the TR-CRF is not configured
as a backup."
	::= { tokenRingDripLocalVlanStatusEntry 6 }


tokenRingDripOwnerNodeID OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The unique identifier  of the system that has
advertised that it has local ports assigned to the
TR-CRF VLAN associated with this entry."
	::= { tokenRingDripLocalVlanStatusEntry 7 }


tokenRingPortSoftErrTable OBJECT-TYPE
	SYNTAX SEQUENCE OF TokenRingPortSoftErrEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Table containing token ring soft error monitoring
configuration information."
	::= { tokenRingGrp 14 }


tokenRingPortSoftErrEntry OBJECT-TYPE
	SYNTAX TokenRingPortSoftErrEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing token ring soft error monitoring
configuration information for a particular port."
	::= { tokenRingPortSoftErrTable 1 }

tokenRingPortSoftErrEntry ::=
	SEQUENCE {
		tokenRingPortSoftErrThresh INTEGER,
		tokenRingPortSoftErrReportInterval INTEGER,
		tokenRingPortSoftErrResetCounters INTEGER,
		tokenRingPortSoftErrLastCounterReset TimeTicks,
		tokenRingPortSoftErrEnable INTEGER
		}

tokenRingPortSoftErrThresh OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of soft errors reported from a station
connected to this port which, if exceeded, should
cause a soft error exceeded trap to be issued.
The error counters being monitored and compared to
this threshold value are all of the error counters
in the ringStationTable (see RFC 1513)."
	::= { tokenRingPortSoftErrEntry 1 }


tokenRingPortSoftErrReportInterval OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The sampling period, in seconds, in which each
station connected to this port will be monitored
for excessive soft error reports. If a station
reports more than tokenRingPortSoftErrThreshold
errors within the sampling period a trap will be
issued to the management station(s). Setting a
value of 0 will cause no traps to be sent for
this port."
	::= { tokenRingPortSoftErrEntry 2 }


tokenRingPortSoftErrResetCounters OBJECT-TYPE
	SYNTAX INTEGER {
	noop(1),
	reset(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When this object is set to reset(2), all Soft
Error Monitoring related counters on this port
will be set to 0."
	::= { tokenRingPortSoftErrEntry 3 }


tokenRingPortSoftErrLastCounterReset OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time (in hundredths of a second) since Soft
Error Monitoring counters for this port were last
cleared."
	::= { tokenRingPortSoftErrEntry 4 }


tokenRingPortSoftErrEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the Token Ring Soft Error
Monitoring feature is enabled on this port or not.
The detailed soft error statistics are provided
by Token Ring RMON SNMP objects. Thus, if RMON
(sysEnableRmon) is disabled(2) then the soft error
statistics will only be available from the CLI."
	::= { tokenRingPortSoftErrEntry 5 }


mcastRouterTable OBJECT-TYPE
	SYNTAX SEQUENCE OF McastRouterEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of multicast router port entries. The 
number of entries is determined by the number of
ports in the system."
	::= { multicastGrp 1 }


mcastRouterEntry OBJECT-TYPE
	SYNTAX McastRouterEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing multicast router information for
a particular port."
	INDEX { mcastRouterModuleIndex , mcastRouterPortIndex }

	::= { mcastRouterTable 1 }

mcastRouterEntry ::=
	SEQUENCE {
		mcastRouterModuleIndex INTEGER,
		mcastRouterPortIndex INTEGER,
		mcastRouterAdminStatus INTEGER,
		mcastRouterOperStatus INTEGER
		}

mcastRouterModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located 
(see portModuleIndex)."
	::= { mcastRouterEntry 1 }


mcastRouterPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { mcastRouterEntry 2 }


mcastRouterAdminStatus OBJECT-TYPE
	SYNTAX INTEGER {
	routerPresent(1),
	dynamic(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "And indication of whether the presence of an IP
multicast router on this port is to be determined
statically or dynamically. The value 
routerPresent(1) indicates that the presence of a 
router is statically configured to be present.
The value dynamic(3) indicates the presence is to 
be learned dynamically."
	::= { mcastRouterEntry 3 }


mcastRouterOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	routerPresent(1),
	noRouter(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An indication of whether an IP multicast router
is present on this port."
	::= { mcastRouterEntry 4 }


mcastEnableCgmp OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether Cisco Group Management Protocol
is enabled on the device or not. When CGMP is 
enabled in conjunction with Cisco routers running 
CGMP, only the required ports will participate in 
IP multicast groups."
	::= { multicastGrp 2 }


mcastEnableIgmp OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether Internet Group Management 
Protocol is enabled on the device or not. When 
IGMP is enabled in conjunction with Cisco routers 
running CGMP, only the required ports will 
participate in IP multicast groups."
	::= { multicastGrp 3 }


mcastEnableRgmp OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether Router Group Management 
Protocol is enabled on the device or not. When
RGMP is enabled in conjunction with Cisco routers
running RGMP, multicast data traffic is forwarded
only to those multicast routers that are 
interested to receive that data traffic. IGMP 
snooping feature must be enabled on the system 
to make RGMP feature operational."
	::= { multicastGrp 4 }


dnsEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates if the DNS feature is enabled or 
disabled."
	::= { dnsGrp 1 }


dnsServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF DnsServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists a maximum of 3 DNS servers."
	::= { dnsGrp 2 }


dnsServerEntry OBJECT-TYPE
	SYNTAX DnsServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A DNS server table entry."
	INDEX { dnsServerAddr  }

	::= { dnsServerTable 1 }

dnsServerEntry ::=
	SEQUENCE {
		dnsServerAddr IpAddress,
		dnsServerType INTEGER
		}

dnsServerAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a DNS server."
	::= { dnsServerEntry 1 }


dnsServerType OBJECT-TYPE
	SYNTAX INTEGER {
	invalid(1),
	primary(2),
	other(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add a new entry to the dnsServerTable, set 
this object to primary(2) or other(3) for an IP
address which is not already in the table. The 
primary entry will be used first, if it is 
reachable. Otherwise, one of the other entries 
will be used. Setting one entry to primary(2) 
causes any previous primary entry to change to 
other(3). To remove an entry from the table, set
this object to invalid(1)."
	::= { dnsServerEntry 2 }


dnsDomainName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..127))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "DNS domain name."
	::= { dnsGrp 3 }


syslogServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SyslogServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists a maximum of 3 system log 
servers."
	::= { syslogGrp 1 }


syslogServerEntry OBJECT-TYPE
	SYNTAX SyslogServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A system log server table entry."
	INDEX { syslogServerAddr  }

	::= { syslogServerTable 1 }

syslogServerEntry ::=
	SEQUENCE {
		syslogServerAddr IpAddress,
		syslogServerType INTEGER
		}

syslogServerAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a system log Server."
	::= { syslogServerEntry 1 }


syslogServerType OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add/remove a new entry to the 
syslogServerTable, setting to invalid(2) removes 
the corresponding entry from the 
syslogServerTable. To add a new entry into 
syslogServerTable, set this object to valid(1)
for an IP address which is not already in the 
table."
	::= { syslogServerEntry 2 }


syslogConsoleEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicate whether the system log messages should
be sent to console."
	::= { syslogGrp 2 }


syslogHostEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicate whether the system log messages should
be sent to syslog servers."
	::= { syslogGrp 3 }


syslogMessageControlTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SyslogMessageControlEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table contains the information about what
system log messages should be sent to syslog host,
console, login session, and/or logged into the 
internal buffer."
	::= { syslogGrp 4 }


syslogMessageControlEntry OBJECT-TYPE
	SYNTAX SyslogMessageControlEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A system log message control table entry."
	INDEX { syslogMessageFacility  }

	::= { syslogMessageControlTable 1 }

syslogMessageControlEntry ::=
	SEQUENCE {
		syslogMessageFacility INTEGER,
		syslogMessageSeverity INTEGER
		}

syslogMessageFacility OBJECT-TYPE
	SYNTAX INTEGER {
	cdp(1),
	mcast(2),
	dtp(3),
	dvlan(4),
	earl(5),
	fddi(6),
	ip(7),
	pruning(8),
	snmp(9),
	spantree(10),
	system(11),
	tac(12),
	tcp(13),
	telnet(14),
	tftp(15),
	vtp(16),
	vmps(17),
	kernel(18),
	filesys(19),
	drip(20),
	pagp(21),
	mgmt(22),
	mls(23),
	protfilt(24),
	security(25),
	radius(26),
	udld(27),
	gvrp(28),
	cops(29),
	qos(30),
	acl(31),
	rsvp(32),
	ld(33),
	privatevlan(34),
	ethc(35),
	gl2pt(36)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "System log message facility."
	::= { syslogMessageControlEntry 1 }


syslogMessageSeverity OBJECT-TYPE
	SYNTAX INTEGER {
	emergencies(1),
	alerts(2),
	critical(3),
	errors(4),
	warnings(5),
	notification(6),
	informational(7),
	debugging(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "System log message severity."
	::= { syslogMessageControlEntry 2 }


syslogTimeStampOption OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether syslog Time Stamp Option is 
enabled or not. If it is set to enabled(1), the 
Time Stamp will be in the beginning of each 
syslog message."
	::= { syslogGrp 5 }


syslogTelnetEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicate whether the system log messages should
be sent to telnet sessions."
	::= { syslogGrp 6 }


ntpBcastClient OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry which tells if Cat5000 should act as a
Broadcast client or not."
	::= { ntpGrp 1 }


ntpBcastDelay OBJECT-TYPE
	SYNTAX INTEGER (1..999999)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Estimated Round trip time (in micro seconds) for
NTP broadcasts. The range is from 1 to 999999."
	::= { ntpGrp 2 }


ntpClient OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry which tells if the device can act as a NTP
client (in a client-server configuration type)."
	::= { ntpGrp 3 }


ntpServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NtpServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of NTP Server entries. This table lists a
maximum of 10 Entries."
	::= { ntpGrp 4 }


ntpServerEntry OBJECT-TYPE
	SYNTAX NtpServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing NTP information for a particular
entry."
	INDEX { ntpServerAddress  }

	::= { ntpServerTable 1 }

ntpServerEntry ::=
	SEQUENCE {
		ntpServerAddress IpAddress,
		ntpServerType INTEGER,
		ntpServerPublicKey Unsigned32
		}

ntpServerAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing NTP Server's IP address."
	::= { ntpServerEntry 1 }


ntpServerType OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add or remove an entry to ntpServerTable.
Setting to 1 adds the entry and setting to 2 
clears the entry."
	::= { ntpServerEntry 2 }


ntpServerPublicKey OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The key to be used when communicating with this
server.
A key with a value of zero indicates an invalid
ntpServerPublicKey. When the authentication 
feature is enabled the system will not sync with 
this server when ntpAuthenticationPublicKey 
doesn't match with NTP Packet's public key.
or
If the ntpAuthenticationTrustedMode is trusted but
encrypted message of ntpAuthenticationSecretKey
with NTP packet's data doesn't match with NTP 
packet's crypto checksum in the message 
authentication mode (MAC).
or
If the ntpAuthenticationTrustedMode is untrusted.

In client mode NMP will not send request NTP 
Packet to the server when ntpServerPublicKey 
doesn't match with any of the 
ntpAuthenticationPublicKey in
ntpAuthenticationTable.
or
If the ntpAuthenticationTrustedMode is untrusted."
	::= { ntpServerEntry 3 }


ntpSummertimeStatus OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Enabling or Disabling will set the clock ahead or
behind 1 hour respectively.(daylight savings time
in USA). This command gets active only in Summer 
time."
	::= { ntpGrp 5 }


ntpSummerTimezoneName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Summertime time zone name for display purposes."
	::= { ntpGrp 6 }


ntpTimezoneName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..20))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Time zone name for display purposes."
	::= { ntpGrp 7 }


ntpTimezoneOffsetHour OBJECT-TYPE
	SYNTAX INTEGER (-12..12)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Time offset (Hour) from Greenwich Mean Time."
	::= { ntpGrp 8 }


ntpTimezoneOffsetMinute OBJECT-TYPE
	SYNTAX INTEGER (0..59)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Time offset (Minutes) from Greenwich Mean Time."
	::= { ntpGrp 9 }


ntpAuthenticationEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Specifies if authentication feature is enabled or
disabled in the system."
	::= { ntpGrp 10 }


ntpAuthenticationTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NtpAuthenticationEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of NTP Authentication Key entries.
This table lists a maximum of 10 Entries"
	::= { ntpGrp 11 }


ntpAuthenticationEntry OBJECT-TYPE
	SYNTAX NtpAuthenticationEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An entry in the ntpAuthenticationTable,
containing values of an NTP authentication key 
pair."
	INDEX { ntpAuthenticationPublicKey  }

	::= { ntpAuthenticationTable 1 }

ntpAuthenticationEntry ::=
	SEQUENCE {
		ntpAuthenticationPublicKey Unsigned32,
		ntpAuthenticationSecretKey DisplayString,
		ntpAuthenticationTrustedMode INTEGER,
		ntpAuthenticationType INTEGER
		}

ntpAuthenticationPublicKey OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A unique value to identify the authentication 
key. When the authentication feature is enabled 
and the ntpAuthenticationPublicKey matches with
the NTP packet's public key then this entry is 
used."
	::= { ntpAuthenticationEntry 1 }


ntpAuthenticationSecretKey OBJECT-TYPE
	SYNTAX DisplayString (SIZE(1..32))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An arbitrary string known as the secret key used
for encrypting of the NTP packet. This key is
useful when the ntpAuthenticationTrustedMode is 
set to trusted(1).
This key has to be specified when this 
ntpAuthenticationEntry is created. When reading 
this object, it will return empty string."
	::= { ntpAuthenticationEntry 2 }


ntpAuthenticationTrustedMode OBJECT-TYPE
	SYNTAX INTEGER {
	trusted(1),
	untrusted(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A flag indicates whether the 
ntpAuthenticationSecretKey is trusted or 
untrusted. Setting a ntpAuthenticationSecretKey
to trusted(1) allows authentication on NTP 
packets containing this key, and setting a 
ntpAuthenticationSecretKey to untrusted(2) drops
all NTP packets containing this key."
	::= { ntpAuthenticationEntry 3 }


ntpAuthenticationType OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add or remove an entry to 
ntpAuthenticationTable. Setting to 1 adds the 
entry and setting to 2 clears the entry."
	::= { ntpAuthenticationEntry 4 }


tacacsLoginAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	enabledForTelnetOnly(3),
	enabledForConsoleOnly(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the login authentication using
the TACACS+ feature is enabled or disabled for 
console sessions and/or telnet sessions.

Setting this object to enabled(1), the login
authentication using the TACACS+ feature is 
enabled for both telnet and console sessions.

Setting this object to disabled(2), the login
authentication using the TACACS+ feature is 
disabled for both telnet and console sessions.

Setting this object to enabledForTelnetOnly(3), 
the login authentication using the TACACS+ 
feature is enabled only for telnet sessions, but
disabled for console sessions.

Setting this object to enabledForConsoleOnly(4),
the login authentication using the TACACS+ 
feature is enabled only for console sessions, 
but disabled for telnet sessions."
	::= { tacacsGrp 1 }


tacacsEnableAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	enabledForTelnetOnly(3),
	enabledForConsoleOnly(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the enable authentication using
the TACACS+ feature is enabled or disabled for
console sessions and/or telnet sessions based on 
the value.

Setting this object to enabled(1), the enable
authentication using the TACACS+ feature is 
enabled for both telnet and console sessions.

Setting this object to disabled(2), the enable
authentication using the TACACS+ feature is 
disabled for both telnet and console sessions.

Setting this object to enabledForTelnetOnly(3), 
the enable authentication using the TACACS+ 
feature is enabled only for telnet sessions, but
disabled for console sessions.

Setting this object to enabledForConsoleOnly(4),
the enable authentication using the TACACS+ 
feature is enabled only for console sessions, 
but disabled for telnet sessions."
	::= { tacacsGrp 2 }


tacacsLocalLoginAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	enabledForTelnetOnly(3),
	enabledForConsoleOnly(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the login authentication using
local password is enabled or disabled for Console
session and/or Telnet session based on the value.

Setting this object to enabled(1),the login
authentication using local password is enabled for
both telnet and console sessions.

Setting this object to disabled(2), the login
authentication using local password is disabled
for both telnet and console sessions.

Setting this object to enabledForTelnetOnly(3), 
the login authentication using local password is 
enabled only for telnet sessions, but disabled for
console session.

Setting this object to enabledForConsoleOnly(4),
the login authentication using local password is 
enabled only for console session, but disabled for
telnet sessions."
	::= { tacacsGrp 3 }


tacacsLocalEnableAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	enabledForTelnetOnly(3),
	enabledForConsoleOnly(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the enable authentication using
local password is enabled or disabled for Console
session and/or Telnet sessions.

Setting this object to enabled(1),the enable
authentication using local password is enabled for
both telnet and console sessions.

Setting this object to disabled(2), the enable
authentication using local password is disabled
for both telnet and console sessions.

Setting this object to enabledForTelnetOnly(3), 
the enable authentication using local password is 
enabled only for telnet sessions, but disabled for
console sessions.

Setting this object to enabledForConsoleOnly(4), 
the enable authentication using local password is 
enabled only for console sessions, but disabled 
for telnet sessions."
	::= { tacacsGrp 4 }


tacacsNumLoginAttempts OBJECT-TYPE
	SYNTAX INTEGER (1..10)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The number of login attempts allowed."
	::= { tacacsGrp 5 }


tacacsDirectedRequest OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the directed-request feature of
TACACS+ is enabled or disabled."
	::= { tacacsGrp 6 }


tacacsTimeout OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The duration in seconds to wait for a response
from the TACACS+ server host."
	::= { tacacsGrp 7 }


tacacsAuthKey OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..100))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The key used in encrypting the packets passed
between the TACACS+ server and the client. This 
key must match the one configured on the server.

Note that this item is only accessible when using
the community string defined in sysCommunityRwa."
	::= { tacacsGrp 8 }


tacacsServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF TacacsServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists a maximum of 3 TACACS+ servers."
	::= { tacacsGrp 9 }


tacacsServerEntry OBJECT-TYPE
	SYNTAX TacacsServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A TACACS+ server table entry."
	INDEX { tacacsServerAddr  }

	::= { tacacsServerTable 1 }

tacacsServerEntry ::=
	SEQUENCE {
		tacacsServerAddr IpAddress,
		tacacsServerType INTEGER
		}

tacacsServerAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a TACACS+ Server."
	::= { tacacsServerEntry 1 }


tacacsServerType OBJECT-TYPE
	SYNTAX INTEGER {
	invalid(1),
	primary(2),
	other(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add a new entry to the tacacsServerTable, set
this object to primary(2) or other(3) for an IP
address which is not already in the table. The 
primary entry will be used first, if it is 
reachable. Otherwise, one of the other entries 
will be used. Setting one entry to primary(2) 
causes any previous primary entry to change to 
other(3). To remove an entry from the table, set 
this object to invalid(1)."
	::= { tacacsServerEntry 2 }


ipPermitEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	enabledForTelnetOnly(3),
	enabledForSnmpOnly(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "This is deprecated and replaced by 
ipPermitAccessEnable.

Indicate whether the IP permit feature is enabled 
or disabled for Telnet and/or SNMP.

Setting this object to enabled(1), the IP permit
feature is enabled for both telnet and SNMP.

Setting this object to disabled(2), the IP permit 
feature is disabled for both telnet and SNMP.

Setting this object to enabledForTelnetOnly(3), 
the IP permit feature is enabled for Telnet, but 
disabled for SNMP.

Setting this object to enabledForSnmpOnly(4), the
IP permit feature is enabled for SNMP, but 
disabled for Telnet."
	::= { ipPermitListGrp 1 }


ipPermitListTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IpPermitListEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists a maximum of 100 IP Addresses
with net masks of IP permit hosts. If 
ipPermitEnable is set to enabled(1), the system 
will only accept inbound accesses which come from 
the configured hosts with their permit access 
types in this table."
	::= { ipPermitListGrp 2 }


ipPermitListEntry OBJECT-TYPE
	SYNTAX IpPermitListEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A IP permit list table entry."
	INDEX { ipPermitAddress , ipPermitMask }

	::= { ipPermitListTable 1 }

ipPermitListEntry ::=
	SEQUENCE {
		ipPermitAddress IpAddress,
		ipPermitMask IpAddress,
		ipPermitType INTEGER,
		ipPermitAccessType BITS
		}

ipPermitAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a IP permit host."
	::= { ipPermitListEntry 1 }


ipPermitMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP net mask of a IP permit host."
	::= { ipPermitListEntry 2 }


ipPermitType OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this object to invalid(2), removes the
corresponding entry from the ipPermitListTable. To
add a new entry into ipPermitListTable, set this
object to valid(1), for an IP address and IP net
mask which are not already in the table."
	::= { ipPermitListEntry 3 }


ipPermitAccessType OBJECT-TYPE
	SYNTAX OCTET STRING {
	telnet(0),
	snmp(1),
	ssh(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP access type of a IP permit host.
At least one access type has to be set."
	::= { ipPermitListEntry 4 }


ipPermitDeniedListTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IpPermitDeniedListEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists up to 10 the most recently 
denied IP addresses with the access type."
	::= { ipPermitListGrp 3 }


ipPermitDeniedListEntry OBJECT-TYPE
	SYNTAX IpPermitDeniedListEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A IP permit denied list table entry."
	INDEX { ipPermitDeniedAddress  }

	::= { ipPermitDeniedListTable 1 }

ipPermitDeniedListEntry ::=
	SEQUENCE {
		ipPermitDeniedAddress IpAddress,
		ipPermitDeniedAccess INTEGER,
		ipPermitDeniedTime TimeTicks
		}

ipPermitDeniedAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a IP permit denied access."
	::= { ipPermitDeniedListEntry 1 }


ipPermitDeniedAccess OBJECT-TYPE
	SYNTAX INTEGER {
	telnet(1),
	snmp(2),
	ssh(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The denied access type."
	::= { ipPermitDeniedListEntry 2 }


ipPermitDeniedTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The time (in hundredths of a second) since the IP
permit denied access happens."
	::= { ipPermitDeniedListEntry 3 }


ipPermitAccessTypeEnable OBJECT-TYPE
	SYNTAX OCTET STRING {
	telnet(0),
	snmp(1),
	ssh(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is to replace ipPermitEnable.
Indicates whether the IP permit feature is 
enabled or disabled for Telnet, SNMP and ssh. If
a bit is set the coresponding feature is enabled.
If a bit is not set the coresponding feature is 
disabled."
	::= { ipPermitListGrp 4 }


portChannelTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortChannelEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "A list of port channel entries. The number of 
entries is determined by the number of ports in 
the system which support the Ethernet Channelling 
feature."
	::= { portChannelGrp 1 }


portChannelEntry OBJECT-TYPE
	SYNTAX PortChannelEntry
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Entry containing information for a particular
port on a module."
	INDEX { portChannelModuleIndex , portChannelPortIndex }

	::= { portChannelTable 1 }

portChannelEntry ::=
	SEQUENCE {
		portChannelModuleIndex INTEGER,
		portChannelPortIndex INTEGER,
		portChannelPorts OCTET STRING,
		portChannelAdminStatus INTEGER,
		portChannelOperStatus INTEGER,
		portChannelNeighbourDeviceId OCTET STRING,
		portChannelNeighbourPortId INTEGER,
		portChannelProtInPackets Counter32,
		portChannelProtOutPackets Counter32,
		portChannelIfIndex INTEGER
		}

portChannelModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located."
	::= { portChannelEntry 1 }


portChannelPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { portChannelEntry 2 }


portChannelPorts OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..8))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The set of ports on a module channelling 
together. Each Octet within the value of this 
object specifies a set of eight ports, with the 
first octet specifying ports 1 through 8, the 
second octet specifying ports 9 through 16, etc.
Within each octet, the most significant bit 
represents the lowest numbered port, and the 
least significant bit rep resents the highest 
numbered port. Thus, each port is represented by
a single bit within the value of this object. If
that bit has a value of `1' then that port is 
included in the set of channel ports. The default
value of this object is a string which only has a
value of `1' on its own port."
	::= { portChannelEntry 3 }


portChannelAdminStatus OBJECT-TYPE
	SYNTAX INTEGER {
	on(1),
	off(2),
	desirable(3),
	auto(4),
	desirableSilent(5),
	autoSilent(6)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates the administrative status set on the 
channel ports. If the status is set to on(1), the 
channelling is enabled. If the status is set to 
off(2), the channelling is disabled. If the status
is set to desirable(3), the port initiates a pagp 
negotiation request to become a channel and will 
become a channel if the far end agrees. If the 
status is set to auto(4), the port does not 
initiate a request to become a channel but will do
so if it receives a request to become a channel 
from the far end. If the status is set to
desirableSilent(5), the port initiates a pagp 
negotiation request to become a channel and will 
become a channel if the far end agrees. If the 
port doesn't receive any packets from far end, 
then  after some timeout period the port forms a 
channel by itself. If the status is set to 
autoSilent(6), the port does not initiate a 
request to become a channel, but will do so if it 
receives a request to become a channel from the 
far end. If the port doesn't receive any request, 
then after some timeout period the port forms a 
channel by itself."
	::= { portChannelEntry 4 }


portChannelOperStatus OBJECT-TYPE
	SYNTAX INTEGER {
	channelling(1),
	notChannelling(2)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the ports current channelling
operational status is channel or not."
	::= { portChannelEntry 5 }


portChannelNeighbourDeviceId OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(6))
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates the neighbors device id."
	::= { portChannelEntry 6 }


portChannelNeighbourPortId OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates the neighbor ports' Id."
	::= { portChannelEntry 7 }


portChannelProtInPackets OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates the number of protocol packets received
on the ports."
	::= { portChannelEntry 8 }


portChannelProtOutPackets OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates the number of protocol packets 
transmitted on the ports."
	::= { portChannelEntry 9 }


portChannelIfIndex OBJECT-TYPE
	SYNTAX INTEGER (1..2147483647)
	ACCESS read-only
	STATUS optional
	DESCRIPTION "The value of the instance of the ifIndex object 
defined in MIB-II, for the interface corresponding
to the channel which the port belongs to. This 
object will have a non zero value if its 
portChannelOperStatus is channelling and the link 
of this port is up."
	::= { portChannelEntry 10 }


portCpbTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortCpbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of port capability entries. The number of
entries is determined by the number of modules in
the chassis and the number of ports on each 
module."
	::= { portCpbGrp 1 }


portCpbEntry OBJECT-TYPE
	SYNTAX PortCpbEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing port capability information for
a particular port on a module."
	INDEX { portCpbModuleIndex , portCpbPortIndex }

	::= { portCpbTable 1 }

portCpbEntry ::=
	SEQUENCE {
		portCpbModuleIndex INTEGER,
		portCpbPortIndex INTEGER,
		portCpbSpeed BITS,
		portCpbDuplex BITS,
		portCpbTrunkEncapsulationType BITS,
		portCpbTrunkMode BITS,
		portCpbChannel DisplayString,
		portCpbBroadcastSuppression BITS,
		portCpbFlowControl BITS,
		portCpbSecurity INTEGER,
		portCpbVlanMembership BITS,
		portCpbPortfast INTEGER,
		portCpbUdld INTEGER,
		portCpbInlinePower BITS,
		portCpbAuxiliaryVlan BITS,
		portCpbSpan BITS,
		portCpbCosRewrite INTEGER,
		portCpbTosRewrite BITS,
		portCpbCopsGrouping OCTET STRING,
		portCpbDot1x INTEGER,
		portCpbIgmpFilter INTEGER
		}

portCpbModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located (see 
portModuleIndex)."
	::= { portCpbEntry 1 }


portCpbPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module (see portIndex)."
	::= { portCpbEntry 2 }


portCpbSpeed OBJECT-TYPE
	SYNTAX OCTET STRING {
	auto(0),
	mbps4(1),
	mbps10(2),
	mbps16(3),
	mbps45(4),
	mbps100(5),
	mbps155(6),
	mbps400(7),
	mbps622(8),
	mbps1000(9),
	mbps1dot544(10),
	mbps2(11),
	mbps2dot048(12),
	kps64(13),
	mbps10000(14)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the port speed capability of a port."
	::= { portCpbEntry 3 }


portCpbDuplex OBJECT-TYPE
	SYNTAX OCTET STRING {
	half(0),
	full(1),
	auto(2),
	hdx(3),
	fdx(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the duplex capability of a port.
The fdx(4) is specially for tokenring full-duplex
and hdx(3) is specially for tokenring 
half-duplex."
	::= { portCpbEntry 4 }


portCpbTrunkEncapsulationType OBJECT-TYPE
	SYNTAX OCTET STRING {
	lane(0),
	dot10(1),
	dot1Q(2),
	isl(3),
	negotiate(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the VLAN encapsulation capability of a
port, The dot10(1) is for 801.10 and dot1q(2) is 
for 801.1Q."
	::= { portCpbEntry 5 }


portCpbTrunkMode OBJECT-TYPE
	SYNTAX OCTET STRING {
	on(0),
	off(1),
	desirable(2),
	auto(3),
	onNoNegotiate(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the trunk capability of a port."
	::= { portCpbEntry 6 }


portCpbChannel OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..128))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the channelling capability of a port."
	::= { portCpbEntry 7 }


portCpbBroadcastSuppression OBJECT-TYPE
	SYNTAX OCTET STRING {
	pps(0),
	percentage(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the broadcast suppression capability of
a port. The pps(0) is for ports capable of
specifying suppression in packets per second and 
percentage(1) is for ports capable of specifying 
suppression in terms of percentage of bandwidth."
	::= { portCpbEntry 8 }


portCpbFlowControl OBJECT-TYPE
	SYNTAX OCTET STRING {
	receiveOff(0),
	receiveOn(1),
	receiveDesired(2),
	sendOff(3),
	sendOn(4),
	sendDesired(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the flow control capability of a port."
	::= { portCpbEntry 9 }


portCpbSecurity OBJECT-TYPE
	SYNTAX INTEGER {
	yes(1),
	no(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether a port supports security."
	::= { portCpbEntry 10 }


portCpbVlanMembership OBJECT-TYPE
	SYNTAX OCTET STRING {
	static(0),
	dynamic(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the vlan membership capability of a 
port."
	::= { portCpbEntry 11 }


portCpbPortfast OBJECT-TYPE
	SYNTAX INTEGER {
	yes(1),
	no(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether a port supports portfast."
	::= { portCpbEntry 12 }


portCpbUdld OBJECT-TYPE
	SYNTAX INTEGER {
	yes(1),
	no(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether the port is capable of UDLD
(UniDirectional Link Detection) or not."
	::= { portCpbEntry 13 }


portCpbInlinePower OBJECT-TYPE
	SYNTAX OCTET STRING {
	auto(0),
	on(1),
	off(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicate the inline power capability of a port.
auto(0) denotes the ability that the switch 
automatically determines whether or not power 
should be provided. on(1) denotes the ability to 
manually turn on inline power.
off(2) denotes the ability to manually turn off
inline power."
	::= { portCpbEntry 14 }


portCpbAuxiliaryVlan OBJECT-TYPE
	SYNTAX OCTET STRING {
	vlanNo(0),
	untagged(1),
	dot1p(2),
	none(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicate the voice vlan capability of a port."
	::= { portCpbEntry 15 }


portCpbSpan OBJECT-TYPE
	SYNTAX OCTET STRING {
	source(0),
	destination(1),
	reflector(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates port span capabilities.
source(0) denotes the capability of being SPAN
source destination(1) denotes the capability of 
being SPAN destination, reflector(2) denotes the  
capability of being SPAN reflector."
	::= { portCpbEntry 16 }


portCpbCosRewrite OBJECT-TYPE
	SYNTAX INTEGER {
	yes(1),
	no(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether a port supports CoS rewrite."
	::= { portCpbEntry 17 }


portCpbTosRewrite OBJECT-TYPE
	SYNTAX OCTET STRING {
	dscp(0),
	ipPrecedence(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the ToS rewrite capability of a port.
dscp(0) denotes the port capability to classify 
packets according to the DSCP.
ipPrecedence(1) denotes the port capability to 
classify packets according to the IP Precedence."
	::= { portCpbEntry 18 }


portCpbCopsGrouping OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE(0..8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The set of ports on a module that are configured
together as far as the Differentiated Services 
Cops feature is concerned. Each Octet within the
value of this object specifies a set of eight
ports, with the first octet specifying ports 1
through 8, the second octet specifying ports 9
through 16, etc. Within each octet, the most
significant bit represents the lowest numbered
port, and the least significant bit represents
the highest numbered port. Thus, each port is
represented by a single bit within the value of
this object. If that bit has a value of `1' then
that port is included in the set of Cops 
grouping."
	::= { portCpbEntry 19 }


portCpbDot1x OBJECT-TYPE
	SYNTAX INTEGER {
	yes(1),
	no(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether a port supports 802.1x."
	::= { portCpbEntry 20 }


portCpbIgmpFilter OBJECT-TYPE
	SYNTAX INTEGER {
	yes(1),
	no(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether a port supports IGMP filter."
	::= { portCpbEntry 21 }


portTopNControlTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortTopNControlEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of top N port control entries."
	::= { portTopNGrp 1 }


portTopNControlEntry OBJECT-TYPE
	SYNTAX PortTopNControlEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A set of parameters that control the creation of
a report of the top N ports according to several 
metrics.
For example, an instance of the portTopNDuration
object might be named portTopNDuration.3"
	INDEX { portTopNControlIndex  }

	::= { portTopNControlTable 1 }

portTopNControlEntry ::=
	SEQUENCE {
		portTopNControlIndex INTEGER,
		portTopNRateBase INTEGER,
		portTopNType INTEGER,
		portTopNMode INTEGER,
		portTopNReportStatus INTEGER,
		portTopNDuration INTEGER,
		portTopNTimeRemaining INTEGER,
		portTopNStartTime TimeTicks,
		portTopNRequestedSize INTEGER,
		portTopNGrantedSize INTEGER,
		portTopNOwner OwnerString,
		portTopNStatus RowStatus
		}

portTopNControlIndex OBJECT-TYPE
	SYNTAX INTEGER (1..5)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies an entry
in the portTopNControl table. Each such
entry defines one top N report."
	::= { portTopNControlEntry 1 }


portTopNRateBase OBJECT-TYPE
	SYNTAX INTEGER {
	portTopNUtilization(1),
	portTopNIOOctets(2),
	portTopNIOPkts(3),
	portTopNIOBroadcastPkts(4),
	portTopNIOMulticastPkts(5),
	portTopNInErrors(6),
	portTopNBufferOverflow(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The variable for all ports in this system
based on which portTopNTable/report is ordered.

This object may not be modified if the associated
portTopNStatus object is equal to active(1)."
	::= { portTopNControlEntry 2 }


portTopNType OBJECT-TYPE
	SYNTAX INTEGER {
	portTopNAllPorts(1),
	portTopNEthernet(2),
	portTopNFastEthernet(3),
	portTopNGigaEthernet(4),
	portTopNTokenRing(5),
	portTopNFDDI(6),
	portTopNAllEthernetPorts(7),
	portTopN10GigaEthernet(8)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The sampling port type.

This object may not be modified if the associated
portTopNStatus object is equal to active(1)."
	::= { portTopNControlEntry 3 }


portTopNMode OBJECT-TYPE
	SYNTAX INTEGER {
	portTopNForeground(1),
	portTopNBackground(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The running mode of this portTopN control entry.
portTopNForeground (1) means when 
portTopNTimeRemaining reaches to 0, the report 
will show on the CLI at once and it won't be kept
in the portTopNTable. portTopNBackground (2) means
the report will not show on the CLI it will be 
kept in the portTopNTable.

This object may not be modified if the associated
portTopNStatus object is equal to active(1)."
	::= { portTopNControlEntry 4 }


portTopNReportStatus OBJECT-TYPE
	SYNTAX INTEGER {
	progressing(1),
	ready(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The report status of this portTopN control entry.
Progressing (1) means that the report of this 
portTopN control entry is still in progress. The 
management station can poll this mib object to 
check the report data is available or not. 
Ready (2) means the report is available."
	::= { portTopNControlEntry 5 }


portTopNDuration OBJECT-TYPE
	SYNTAX INTEGER (0|10..999)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The sampling interval in seconds during which
statistics are collected for this report.

When this is set a value and the corresponding
portTopNControlEntry is valid, the 
portTopNTimeRemaining object shall be set to the 
same value.
portTopNTimeRemaining starts at the same value as
portTopNDuration and counts down as the collection
goes on.

If this object is set to be zero, it will do the
collection immediately. And the collecting report
value should be the absolute counter value."
	::= { portTopNControlEntry 6 }


portTopNTimeRemaining OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of seconds left in the report 
currently being collected. When portTopNDuration
object is modified by the management station, a 
new collection is started, possibly aborting a 
currently running report. The new value is used as
the requested duration of this report, which is 
loaded from the associated portTopNDuration 
object.

When this object is a non-zero value, any 
associated portTopNEntries shall be made 
inaccessible by the monitor.

While the value of this object is non-zero and the
corresponding portTopNControlENtry is valid, it
decrements by one per second until it reaches 
zero. During this time, all associated 
portTopNEntries shall remain inaccessible. At 
the time that this object decrements to zero, the
report is made accessible in the portTopNTable.
Thus, the portTopN table is to be created only at
the end of the collection interval."
	::= { portTopNControlEntry 7 }


portTopNStartTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of sysUpTime when this top N report was
last started. In other words, this is the time
that the associated portTopNTimeRemaining object 
was modified to start the requested report."
	::= { portTopNControlEntry 8 }


portTopNRequestedSize OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of ports requested for the top
N entry.

When this object is created or modified, the value
of portTopNGrantedSize is set as closely to this
object as is possible for the particular
implementation and available resources.
Valid value for this object is 1 to maximum number
of physical ports. The default value is 20 ports."
	::= { portTopNControlEntry 9 }


portTopNGrantedSize OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of ports in the top N table.
When the associated portTopNRequestedSize object
is created or modified, the value of this object
should be set as closely to the requested value as
is possible for the particular implementation and
available resources. The value must not be lowered
except as a result of a set to the associated
portTopNRequestedSize object.
Ports with the highest value of portTopNRateBase 
shall be placed in this table in decreasing order 
of this rate until there is no more room or until
there are no more ports."
	::= { portTopNControlEntry 10 }


portTopNOwner OBJECT-TYPE
	SYNTAX OwnerString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The entity that configured this entry and is
therefore using the resources assigned to it."
	::= { portTopNControlEntry 11 }


portTopNStatus OBJECT-TYPE
	SYNTAX RowStatus
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of this portTopNControl entry.
The Management station sends the user set values
with a portTopNStatus value of createAndGo(4). 
When the agent receives it the collection of the
report starts.
When the portTopNReportStatus is ready(2) the user
can get the reports (portTopNTable).
For the current implementation createAndWait(5)
will not be supported.
There can be only 5 rows in the control table."
	::= { portTopNControlEntry 12 }


portTopNTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortTopNEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of top N port entries."
	::= { portTopNGrp 2 }


portTopNEntry OBJECT-TYPE
	SYNTAX PortTopNEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A set of statistics for a port that is part of a
top N report. For example, an instance of the
portTopNRateBase object might be named
portTopNUtilization.3.10"
	INDEX { portTopNControlIndex , portTopNIndex }

	::= { portTopNTable 1 }

portTopNEntry ::=
	SEQUENCE {
		portTopNIndex INTEGER,
		portTopNModuleNumber INTEGER,
		portTopNPortNumber INTEGER,
		portTopNUtilization INTEGER,
		portTopNIOOctets Counter64,
		portTopNIOPkts Counter64,
		portTopNIOBroadcast Counter64,
		portTopNIOMulticast Counter64,
		portTopNInErrors Counter32,
		portTopNBufferOverFlow Counter32
		}

portTopNIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index that uniquely identifies an entry in
the portTopN table among those in the same report.
This index is between 1 and N, where N is the
portTopNGrantedSize of ports with the highest
portTopNRateBase. Increasing values of 
portTopNIndex shall be assigned to entries with 
decreasing values of portTopNRateBase until index 
N is assigned to the entry with the lowest value 
of portTopNRateBase or there are no more 
portTopNEntries."
	::= { portTopNEntry 1 }


portTopNModuleNumber OBJECT-TYPE
	SYNTAX INTEGER (1..20)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The module number of the port counter data 
entry."
	::= { portTopNEntry 2 }


portTopNPortNumber OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The port number of the port counter data entry."
	::= { portTopNEntry 3 }


portTopNUtilization OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The utilization of the port in the system.
The utilization is computed in the following 
methods:

Ethernet Utilization: (If Full Duplex, multiply by 2)

10 Mbps         I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
Ethernet Util = -----------------------------------------
Interval * 10,000

where 9.6 is interframe gap of Ethernet
6.4 is preamble of Ethernet
10,000 is 10Mbps

100 Mbps        I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
Ethernet Util = --------------------------------------
Interval * 1,000,000

1000 Mbps       I/O-pkts * (96 + 64) + (8 * I/O-Bytes)
Ethernet Util = --------------------------------------
Interval * 10,000,000

All other       I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes)
Ethernet Util = ------------------------------------------
Interval * N * 1,000
(where N is N Mbps)

Token Ring Utilization:
(Assuming that Octets is from AC byte through FCS)


4 Mbps                  Pkts * 32 + (8 * Octets)
Token Ring Util = 100 * ------------------------
Interval * 4,000,000
where 32 is bits in SD, ED, FS and IFG

16 Mbps                 Pkts * 64 + (8 * Octets)
Token Ring Util = 100 * ------------------------
Interval * 16,000,000
where 64 is bits in SD, ED, FS and IFG

FDDI Utilization:

I/O-Pkts * (64 + 8 + 32 + 16) + (8 * I/O-Bytes)
FDDI Util = ----------------------------------------------
Interval * 100,000,000

where 64 is Preamble of FDDI,
8 is the Start Delimiter (SD) of FDDI,
32 is the CRC, and
16 is the End of Frame Sequence (EFS) of FDDI."
	::= { portTopNEntry 4 }


portTopNIOOctets OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Input and Output octets of the port in the 
system."
	::= { portTopNEntry 5 }


portTopNIOPkts OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Input and Output packets of the port in the
system."
	::= { portTopNEntry 6 }


portTopNIOBroadcast OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Input and Output broadcast packets of the 
port in the system."
	::= { portTopNEntry 7 }


portTopNIOMulticast OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Input and Output multicast packets of the
port in the system."
	::= { portTopNEntry 8 }


portTopNInErrors OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Input error packets of the port in the 
system."
	::= { portTopNEntry 9 }


portTopNBufferOverFlow OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of buffer overflow of the port in
the system."
	::= { portTopNEntry 10 }


mdgGatewayTable OBJECT-TYPE
	SYNTAX SEQUENCE OF MdgGatewayEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists a maximum of 3 MDG gateways."
	::= { mdgGrp 1 }


mdgGatewayEntry OBJECT-TYPE
	SYNTAX MdgGatewayEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A MDG gateway table entry."
	INDEX { mdgGatewayAddr  }

	::= { mdgGatewayTable 1 }

mdgGatewayEntry ::=
	SEQUENCE {
		mdgGatewayAddr IpAddress,
		mdgGatewayType INTEGER
		}

mdgGatewayAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a default gateway."
	::= { mdgGatewayEntry 1 }


mdgGatewayType OBJECT-TYPE
	SYNTAX INTEGER {
	invalid(1),
	primary(2),
	other(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add a new entry to the mdgGatewayTable, set 
this object to primary(2) or other(3) for an IP
address which is not already in the table. The
primary entry will be used first, if it is 
reachable. Otherwise, one of the other entries
will be used. Setting one entry to primary(2)
causes any previous primary entry to change to
other(3). To remove an entry from the table, set
this object to invalid(1). Changing an existing
entry from primary(2) to other(3) is not allowed.
If the value of this object is updated, the
corresponding entry of the ipRouteTable (mibII)
will be updated and vice versa."
	::= { mdgGatewayEntry 2 }


radiusLoginAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	enabledForTelnetOnly(3),
	enabledForConsoleOnly(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the login authentication using
RADIUS feature is enabled or disabled for console
and/or telnet sessions.

Setting this object to enabled(1), the login
authentication using RADIUS feature is enabled for
both console and telnet sessions.

Setting this object to disabled(2), the login
authentication using RADIUS feature is disabled
for both console and telnet sessions.

Setting this object to enabledForTelnetOnly(3),the
login authentication using RADIUS feature is
enabled only for telnet sessions, but disabled
for console session.

Setting this object to enabledForConsoleOnly(4),
the login authentication using RADIUS feature is 
enabled only for console sessions, but disabled 
for telnet sessions."
	::= { radiusGrp 1 }


radiusEnableAuthentication OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2),
	enabledForTelnetOnly(3),
	enabledForConsoleOnly(4)
	}
	ACCESS read-only
	STATUS optional
	DESCRIPTION "Indicates whether the enable authentication using
the RADIUS feature is enabled or disabled for
Console and telnet sessions.

Setting this object to enabled(1), the enable
authentication using RADIUS feature is enabled for
both console and telnet sessions.

Setting this object to disabled(2), the enable
authentication using RADIUS feature is disabled 
for both console and telnet sessions.

Setting this object to enabledForTelnetOnly(3),
the enable authentication using RADIUS feature is 
enabled only for telnet sessions, but disabled for
console sessions.

Setting this object to enabledForConsoleOnly(4),
the enable authentication using RADIUS feature is 
enabled only for console sessions, but disabled 
for telnet sessions."
	::= { radiusGrp 2 }


radiusDeadtime OBJECT-TYPE
	SYNTAX INTEGER (0..1440)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the length of time in minutes that
the system will mark the server dead when a RADIUS
server does not respond to an authentication 
request. During the interval of the dead time, any
authentication request that comes up would not be 
sent to that RADIUS server that was marked as 
dead. The default value of 0 means that the 
RADIUS servers will not be marked dead if they 
do not respond."
	::= { radiusGrp 3 }


radiusAuthKey OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The key used in encrypting the packets passed 
between the RADIUS server and the client. This key
must match the one configured on the server.

Note that this item is only accessible when using
the community string defined in sysCommunityRwa."
	::= { radiusGrp 4 }


radiusTimeout OBJECT-TYPE
	SYNTAX INTEGER (1..1000)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is the time in seconds between 
retransmissions to the RADIUS server."
	::= { radiusGrp 5 }


radiusRetransmits OBJECT-TYPE
	SYNTAX INTEGER (1..100)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates number of times the RADIUS server 
should be tried before giving up on the server."
	::= { radiusGrp 6 }


radiusServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF RadiusServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table lists a maximum of 3 RADIUS servers."
	::= { radiusGrp 7 }


radiusServerEntry OBJECT-TYPE
	SYNTAX RadiusServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A RADIUS server table entry."
	INDEX { radiusServerAddr  }

	::= { radiusServerTable 1 }

radiusServerEntry ::=
	SEQUENCE {
		radiusServerAddr IpAddress,
		radiusServerAuthPort INTEGER,
		radiusServerType INTEGER
		}

radiusServerAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address of a RADIUS Server."
	::= { radiusServerEntry 1 }


radiusServerAuthPort OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This is the destination UDP port number to which
RADIUS messages should be sent. The RADIUS server
will not be used for authentication if this port 
number is 0."
	::= { radiusServerEntry 2 }


radiusServerType OBJECT-TYPE
	SYNTAX INTEGER {
	invalid(1),
	primary(2),
	other(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "To add a new entry to the radiusServerTable, set
this object to primary(2) or other(3) for an IP
address which is not already in the table. The 
primary entry will be used first, if it is 
reachable. Otherwise, one of the other entries 
will be used. Setting one entry to primary(2) 
causes any previous primary entry to change to 
other(3). To remove an entry from the table, 
set this object to invalid(1)."
	::= { radiusServerEntry 3 }


traceRouteMaxQueries OBJECT-TYPE
	SYNTAX INTEGER (1..20)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Maximum number of query entries allowed to be
outstanding at any time, in the 
traceRouteQueryTable.
The typical value for this object is 5."
	::= { traceRouteGrp 1 }


traceRouteQueryTable OBJECT-TYPE
	SYNTAX SEQUENCE OF TraceRouteQueryEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A control table used to query the information
about each gateway along the path to a host by
specifying retrieval criteria for the host. The 
resulting data for each instance of a query in 
this table is returned in the traceRouteDataTable.
The maximum number of entries (rows) in this table
cannot exceed the value returned by 
traceRouteMaxQueries."
	::= { traceRouteGrp 2 }


traceRouteQueryEntry OBJECT-TYPE
	SYNTAX TraceRouteQueryEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A conceptual row of the traceRouteQueryTable used
to setup retrieval criteria to search for gateways
belongs to the path to a particular host 
identified by its IP address. The actual search 
is started by setting the value of 
traceRouteQueryStatus to valid(1)."
	INDEX { traceRouteQueryIndex  }

	::= { traceRouteQueryTable 1 }

traceRouteQueryEntry ::=
	SEQUENCE {
		traceRouteQueryIndex INTEGER,
		traceRouteHost DisplayString,
		traceRouteQueryDNSEnable INTEGER,
		traceRouteQueryWaitingTime INTEGER,
		traceRouteQueryInitTTL INTEGER,
		traceRouteQueryMaxTTL INTEGER,
		traceRouteQueryUDPPort INTEGER,
		traceRouteQueryPacketCount INTEGER,
		traceRouteQueryPacketSize INTEGER,
		traceRouteQueryTOS INTEGER,
		traceRouteQueryResult INTEGER,
		traceRouteQueryTime TimeTicks,
		traceRouteQueryOwner DisplayString,
		traceRouteQueryStatus INTEGER
		}

traceRouteQueryIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Object which specifies an unique entry in the
traceRouteQueryTable."
	::= { traceRouteQueryEntry 1 }


traceRouteHost OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Network(IP) address in dotted decimal format or
the DNS hostname of the host which is tracerouted."
	::= { traceRouteQueryEntry 2 }


traceRouteQueryDNSEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If this value of this object is true, the 
traceroute operation will do a DNS lookup for each
hop on the path, so the corresponding instance of 
the traceRouteDataTable will contain the host name
and the ip address; otherwise, that instance only 
contains the ip address."
	::= { traceRouteQueryEntry 3 }


traceRouteQueryWaitingTime OBJECT-TYPE
	SYNTAX INTEGER (1..300)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The trace route waiting time in seconds for an
ICMP response message."
	::= { traceRouteQueryEntry 4 }


traceRouteQueryInitTTL OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "If this value of this object is set, it allows
users skip processing for gateways that are less
than traceRouteQueryInitTTL away by sending 
datagram with the value of this object instead of 
the default value of one."
	::= { traceRouteQueryEntry 5 }


traceRouteQueryMaxTTL OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum TTL value used in outgoing packets."
	::= { traceRouteQueryEntry 6 }


traceRouteQueryUDPPort OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The base UDP destination port is used in the 
traceroute datagrams. This value of this object is
often larger than 30,000 to make it improbable 
that this port is used (this causes the 
destination host's UDP module to generate an ICMP
port unreachable so the traceroute operation 
knows when the operation is accomplished).
The traceroute operation will increment this value
of this object each time it sends a datagram. This
object should be used in the unlikely event that
the destination port is listening to a port in the
default traceroute port range."
	::= { traceRouteQueryEntry 7 }


traceRouteQueryPacketCount OBJECT-TYPE
	SYNTAX INTEGER (1..1000)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Specifies the number of traceroute packets to 
send to the target host in this sequence."
	::= { traceRouteQueryEntry 8 }


traceRouteQueryPacketSize OBJECT-TYPE
	SYNTAX INTEGER (0..1420)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Specifies the size of traceroute packets to send
to the target host in this sequence. "
	::= { traceRouteQueryEntry 9 }


traceRouteQueryTOS OBJECT-TYPE
	SYNTAX INTEGER (0..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The type of service to be set in the IP header of
the outgoing packets.This value can set to see if
different types-of-service result in different 
paths. Not all values of TOS are legal or 
meaningful (see the IP spec for definitions. 
Useful values are probably 16 (low delay) and 8 
(high throughput)."
	::= { traceRouteQueryEntry 10 }


traceRouteQueryResult OBJECT-TYPE
	SYNTAX INTEGER (-1..2147483647)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The result status of the query. Possible values 
are:

-1 -Either the query has not been initiated or the
agent is busy processing this query instance. Time
to completion of the query processing depends on 
the complexity of the query and the number of
matches that satisfy this query.

0..2147483647 - The search has ended and this is 
the number of rows in the traceRouteDataTable, 
resulting from this query."
	::= { traceRouteQueryEntry 21 }


traceRouteQueryTime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of sysUpTime at the time when the query
is configured."
	::= { traceRouteQueryEntry 22 }


traceRouteQueryOwner OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..50))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The manager entity that configured this entry and
is therefore using the resources assigned to it."
	::= { traceRouteQueryEntry 23 }


traceRouteQueryStatus OBJECT-TYPE
	SYNTAX INTEGER {
	valid(1),
	invalid(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status object used to manage rows in this 
table.
When set this object to valid(1), the query is
initiated. Once initiated, all the read-write 
objects of this table can't be modified. To remove
an entry from the  table, set this object to 
invalid(2)."
	::= { traceRouteQueryEntry 24 }


traceRouteDataTable OBJECT-TYPE
	SYNTAX SEQUENCE OF TraceRouteDataEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A table containing information about the gateway
belongs to the path to the host corresponding to 
all the completed queries setup in the 
traceRouteQueryTable."
	::= { traceRouteGrp 3 }


traceRouteDataEntry OBJECT-TYPE
	SYNTAX TraceRouteDataEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A conceptual row of the traceRouteDataTable used 
to return information about all the gateway 
belongs to the host of which search criteria is 
corresponding instance of the 
traceRouteQueryTable."
	INDEX { traceRouteQueryIndex , traceRouteDataIndex }

	::= { traceRouteDataTable 1 }

traceRouteDataEntry ::=
	SEQUENCE {
		traceRouteDataIndex INTEGER,
		traceRouteDataGatewayName DisplayString,
		traceRouteDataGatewayIp IpAddress,
		traceRouteDataRtt INTEGER,
		traceRouteDataHopCount INTEGER,
		traceRouteDataErrors INTEGER
		}

traceRouteDataIndex OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Object which specifies an unique entry in the
traceRouteDataTable."
	::= { traceRouteDataEntry 1 }


traceRouteDataGatewayName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The DNS name of the gateway if available."
	::= { traceRouteDataEntry 2 }


traceRouteDataGatewayIp OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The ip address of the gateway. If the traceroute
packet was sent and timed-out, the ip address is
set to 0.0.0.0."
	::= { traceRouteDataEntry 3 }


traceRouteDataRtt OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The  round trip time of the current packet that
have been sent in this sequence."
	::= { traceRouteDataEntry 4 }


traceRouteDataHopCount OBJECT-TYPE
	SYNTAX INTEGER (1..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of hop starting from the place where
the traceroute operation is initialized to the
gateway which has the traceRouteDataGatewayIp."
	::= { traceRouteDataEntry 5 }


traceRouteDataErrors OBJECT-TYPE
	SYNTAX INTEGER {
	icmpUnreachNet(1),
	icmpUnreachHost(2),
	icmpUnreachProtocol(3),
	icmpUnreachPort(4),
	icmpUnreachNeedFrag(5),
	icmpUnreachSrcFail(6),
	icmpUnreachNoNet(7),
	icmpUnreachNoHost(8),
	icmpUnreachHostIsolated(9),
	icmpUnreachNetProhib(10),
	icmpUnreachProhib(11),
	icmpUnreachNetTos(12),
	icmpUnreachHostTos(13),
	icmpUnreachAdmin(14),
	icmpUnreachHostPrec(15),
	icmpUnreachPrecedence(16),
	icmpUnknown(17),
	icmpTimeOut(18),
	icmpTTLExpired(19)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The error of the traceroute operation."
	::= { traceRouteDataEntry 6 }


fileCopyProtocol OBJECT-TYPE
	SYNTAX INTEGER {
	tftp(1),
	rcp(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The protocol to be used for any remote copy.
If the config file transfer is to occur locally on
the SNMP agent, the method of transfer is left up 
to the implementation, and is not restricted to 
the protocols above.

The value of this object can not be changed when
the fileCopyResult object has the value of 
inProgress(1)."
	::= { fileCopyGrp 1 }


fileCopyRemoteServer OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The IP address  or the host name of the tftp/rcp
remote server from (or to) which to copy the file.
If the copy operation  is local on the SNMP agent,
this object is not applicable.

The value of this object can not be changed when
the fileCopyResult object has the value of 
inProgress(1)."
	::= { fileCopyGrp 2 }


fileCopySrcFileName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The source file name (including the path, if
applicable) of the file. The accepted value of
this object is 'cfg1' or 'cfg2' when the requested
action is one of the following:

copyConfigFromFlashToRuntime(8), and
copyConfigFileFromFlashToHost(11).

The value of this object can not be changed when
the fileCopyResult object has the value of 
inProgress(1)."
	::= { fileCopyGrp 3 }


fileCopyDstFileName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..64))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The destination file name (including the path, if
applicable) of the file. The accepted value of
this object is 'cfg1' or 'cfg2' when the requested
action is one of the following:

copyConfigFromRuntimeToFlash(9),
copyConfigFileFromHostToFlash(10).

The value of this object can not be changed when
the fileCopyResult object has the value of
inProgress(1)."
	::= { fileCopyGrp 4 }


fileCopyModuleNumber OBJECT-TYPE
	SYNTAX INTEGER (0..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The module number specified in the copy 
operation.

If the value of this object is 0 and the 
fileCopyAction object has the value of 
copyImageFromHostToFlash(4), the switch will do 
multiple download to the modules with matching 
image type. It is left to the SNMP agent to allow 
the individual modules to be reset with the 
downloaded images or not. 

The value of this object can not be changed when 
the fileCopyResult object has the value of 
inProgress(1)."
	::= { fileCopyGrp 5 }


fileCopyUserName OBJECT-TYPE
	SYNTAX DisplayString (SIZE(1..40))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Remote user name for copy via rcp protocol. This 
object must be specified when the 
fileCopyProtocol is rcp."
	::= { fileCopyGrp 6 }


fileCopyAction OBJECT-TYPE
	SYNTAX INTEGER {
	other(1),
	copyConfigFromHostToRuntime(2),
	copyConfigFromRuntimeToHost(3),
	copyImageFromHostToFlash(4),
	copyImageFromFlashToHost(5),
	copyConfigFromFlashToRuntime(8),
	copyConfigFromRuntimeToFlash(9),
	copyConfigFileFromHostToFlash(10),
	copyConfigFileFromFlashToHost(11),
	copyTechReportFromRuntimeToHost(12)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Setting this object to one of the acceptable 
values will initiate the requested action using 
the information provided by fileCopyProtocol, 
fileCopyRemoteServer, fileCopySrcFileName, 
fileCopyDstFileName,fileCopyModuleNumber and 
fileCopyUserName.

copyConfigFromHostToRuntime(2):
Copy the configuration file from host to 
runtime configuration over the network through 
tftp/rcp. This action will use 
fileCopyProtocol, fileCopyRemoteServer,
fileCopySrcFileName, fileCopyModuleNumber,
and fileCopyUserName (if applicable).

copyConfigFromRuntimeToHost(3):
Copy the runtime configuration to host over the
network through tftp/rcp. This action will use
fileCopyProtocol, fileCopyRemoteServer,
fileCopyModuleNumber, fileCopyDstFileName,  
fileCopyUserName (if applicable), and 
fileCopyRuntimeConfigPart.

copyImageFromHostToFlash(4):
Copy the image from host to the flash over the
network through tftp/rcp. It is up to the
SNMP agent to reset and run the downloaded
image after copying. This action will use
fileCopyProtocol, fileCopyRemoteServer,
fileCopySrcFileName, fileCopyModuleNumber,
and fileCopyUserName (if applicable).

copyImageFromFlashToHost(5):
Copy the image from flash to host over the 
switch through tftp/rcp. This action will use
fileCopyProtocol, fileCopyRemoteServer,
fileCopyDstFileName, fileCopyModuleNumber,
and fileCopyUserName (if applicable).

copyConfigFromFlashToRuntime(8):
Copy the configuration file to the runtime
configuration locally. This action can perform
only on the SUPG supervisor model and will
use fileCopySrcFileName ('cfg1' or 'cfg2').

copyConfigFromRuntimeToFlash(9):
Copy  the runtime configuration to a 
configuration file on the flash locally. This 
action can perform only on the SUPG supervisor 
model and will use fileCopyDstFileName ('cfg1' 
or 'cfg2'), and fileCopyRuntimeConfigPart.

copyConfigFileFromHostToFlash(10):
Copy the configuration file from host to the
runtime configuration over the network through
tftp/rcp. This action can perform only on the
SUPG  supervisor model and will use
fileCopyProtocol, fileCopyRemoteServer,
fileCopySrcFileName, fileCopyDstFileName,
fileCopyModuleNumber and fileCopyUserName 
(if applicable).

copyConfigFileFromFlashToHost(11):
Copy the configuration file on the flash to
host over the network through tftp/rcp.
This action can perform only on the
SUPG supervisor model and will use
fileCopyProtocol, fileCopyRemoteServer,
fileCopySrcFileName, fileCopyDstFileName,
fileCopyModuleNumber and fileCopyUserName 
(if applicable).

copyTechReportFromRuntimeToHost(12):
Copy the technical report of the system to
host over the network through tftp only. This
action will use fileCopyProtocol,
fileCopyRemoteServer, fileCopyModuleNumber,
and fileCopyDstFileName.

Setting this object to any other value results in
an error.

The value of this object can not be changed when
the fileCopyResult object has the value of 
inProgress(1)."
	::= { fileCopyGrp 7 }


fileCopyResult OBJECT-TYPE
	SYNTAX INTEGER {
	inProgress(1),
	success(2),
	noResponse(3),
	tooManyRetries(4),
	noBuffers(5),
	noProcesses(6),
	badChecksum(7),
	badLength(8),
	badFlash(9),
	serverError(10),
	userCanceled(11),
	wrongCode(12),
	fileNotFound(13),
	invalidHost(14),
	invalidModule(15),
	accessViolation(16),
	unknownStatus(17),
	invalidStorageDevice(18),
	insufficientSpaceOnStorageDevice(19),
	insufficientDramSize(20),
	incompatibleImage(21),
	rcpError(22)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Contains the result of the last copy action 
request.
If the value of fileCopyResult is rcpError(22),
then the detailed rcp error messages are contained
in fileCopyResultRcpErrorMessage."
	::= { fileCopyGrp 8 }


fileCopyResultRcpErrorMessage OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Contains the detailed rcp error messages if the
value of fileCopyResult is rcpError(22) for the 
last copy action request; otherwise, this MIB 
object contains the empty string."
	::= { fileCopyGrp 9 }


fileCopyRuntimeConfigPart OBJECT-TYPE
	SYNTAX INTEGER {
	all(1),
	nonDefault(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the part of runtime configuration to be
copied. This object will only take effect when the
object value of fileCopyAction is one of the 
following:

copyConfigFromRuntimeToHost(3),
copyConfigFromRuntimeToFlash(9). 

all -- copy all the runtime configuration.

nonDefault --copy only the part of the runtime 
configuration which is different from
the default configuration."
	::= { fileCopyGrp 10 }


voicePortIfConfigTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VoicePortIfConfigEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of port entries. The number of entries is
determined by the number of modules in the chassis
and the number of ports with the voice port
interface configuration capability in the system."
	::= { voiceGrp 1 }


voicePortIfConfigEntry OBJECT-TYPE
	SYNTAX VoicePortIfConfigEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing voice interface configuration 
for a particular port."
	INDEX { voicePortIfConfigModuleIndex , voicePortIfConfigPortIndex }

	::= { voicePortIfConfigTable 1 }

voicePortIfConfigEntry ::=
	SEQUENCE {
		voicePortIfConfigModuleIndex INTEGER,
		voicePortIfConfigPortIndex INTEGER,
		voicePortIfDHCPEnabled TruthValue,
		voicePortIfIpAddress IpAddress,
		voicePortIfIpNetMask IpAddress,
		voicePortIfTftpServerAddress IpAddress,
		voicePortIfGatewayAddress IpAddress,
		voicePortIfDnsServerAddress IpAddress,
		voicePortIfDnsDomain DisplayString,
		voicePortIfOperDnsDomain DisplayString
		}

voicePortIfConfigModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located."
	::= { voicePortIfConfigEntry 1 }


voicePortIfConfigPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module. The value is determined by the
location of the port on the module."
	::= { voicePortIfConfigEntry 2 }


voicePortIfDHCPEnabled OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicate whether DHCP service is enabled."
	::= { voicePortIfConfigEntry 3 }


voicePortIfIpAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's IP address. This object
is configurable only if voicePortIfDHCPEnabled
is false. When the value of voicePortIfDHCPEnabled
is false, this object should be configured."
	::= { voicePortIfConfigEntry 4 }


voicePortIfIpNetMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's subnet mask. This object
is configurable only if voicePortIfDHCPEnabled
is false. When the value of voicePortIfDHCPEnabled
is false, this object should be configured."
	::= { voicePortIfConfigEntry 5 }


voicePortIfTftpServerAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's TFTP Server address. This object
is configurable only if voicePortIfDHCPEnabled
is false. When the value of voicePortIfDHCPEnabled
is false, this object should be configured."
	::= { voicePortIfConfigEntry 6 }


voicePortIfGatewayAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's router address. This object
is configurable only if voicePortIfDHCPEnabled
is false."
	::= { voicePortIfConfigEntry 7 }


voicePortIfDnsServerAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's DNS Server address. This object
is configurable only if voicePortIfDHCPEnabled
is false."
	::= { voicePortIfConfigEntry 8 }


voicePortIfDnsDomain OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's DNS domain name. This object
is configurable only if voicePortIfDHCPEnabled
is false."
	::= { voicePortIfConfigEntry 9 }


voicePortIfOperDnsDomain OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This port's operational DNS domain name. If
voicePortIfDHCPEnabled is true, this object
indicates the domain name taken from the
DHCP server. If voicePortIfDHCPEnabled is false,
this object indicates the domain name configured
by users for this voice port or the domain name
taken from DNS configuration for the system
otherwise."
	::= { voicePortIfConfigEntry 10 }


voicePortCallManagerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VoicePortCallManagerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of call manager entries. The number of 
entries is determined by the number of modules in 
the chassis and the number of ports with the 
voice port interface configuration capability 
in the system."
	::= { voiceGrp 2 }


voicePortCallManagerEntry OBJECT-TYPE
	SYNTAX VoicePortCallManagerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing voice interface configuration 
for a particular port."
	INDEX { voicePortModuleIndex , voicePortIndex, voicePortCallManagerIndex }

	::= { voicePortCallManagerTable 1 }

voicePortCallManagerEntry ::=
	SEQUENCE {
		voicePortModuleIndex INTEGER,
		voicePortIndex INTEGER,
		voicePortCallManagerIndex INTEGER,
		voicePortCallManagerIpAddr IpAddress
		}

voicePortModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the 
module where this port is located."
	::= { voicePortCallManagerEntry 1 }


voicePortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module."
	::= { voicePortCallManagerEntry 2 }


voicePortCallManagerIndex OBJECT-TYPE
	SYNTAX INTEGER (1..5)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this 
CallManager within a module/port. A port can 
register up to 5 CallManager."
	::= { voicePortCallManagerEntry 3 }


voicePortCallManagerIpAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The Call Manager IP Address of this port. A port
can register up to 5 call managers."
	::= { voicePortCallManagerEntry 4 }


voicePortOperDnsServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VoicePortOperDnsServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of operational DNS entries used by the
voice ports."
	::= { voiceGrp 3 }


voicePortOperDnsServerEntry OBJECT-TYPE
	SYNTAX VoicePortOperDnsServerEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing infomation on DNS servers may be
used for a particular voice port. 

If DHCP is enabled on a port, the DNS server IP 
address will come from the DHCP server. If DHCP 
is disabled, the DNS server IP address can be 
configured by users through the mib object 
voicePortIfDnsServerAddress for a port, otherwise 
it will be taken from DNS configuration in the
system."
	INDEX { voicePortDnsModuleIndex , voicePortDnsPortIndex, voicePortOperDnsServerIndex }

	::= { voicePortOperDnsServerTable 1 }

voicePortOperDnsServerEntry ::=
	SEQUENCE {
		voicePortDnsModuleIndex INTEGER,
		voicePortDnsPortIndex INTEGER,
		voicePortOperDnsServerIndex Unsigned32,
		voicePortOperDnsServerIpAddr IpAddress,
		voicePortOperDnsServerSource INTEGER
		}

voicePortDnsModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the
module where this port is located."
	::= { voicePortOperDnsServerEntry 1 }


voicePortDnsPortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module."
	::= { voicePortOperDnsServerEntry 2 }


voicePortOperDnsServerIndex OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this DNS
server within a module/port. This value indicates
the priority order among these DNS servers."
	::= { voicePortOperDnsServerEntry 3 }


voicePortOperDnsServerIpAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The operational DNS Server IP Address of this 
port. "
	::= { voicePortOperDnsServerEntry 4 }


voicePortOperDnsServerSource OBJECT-TYPE
	SYNTAX INTEGER {
	fromDhcp(1),
	fromPortConfig(2),
	fromSystemConfig(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The source of the Dns Server IP Address of this 
port.

fromDhcp(1) indicates that the DNS server IP
address comes from the DHCP server.

fromPortConfig(2) indicates that the DNS server IP
address comes from the object 
voicePorfIfDnsServerAdress.

fromSystemConfig(3) indicates that the DNS server
IP address comes from DNS configuration for the 
system."
	::= { voicePortOperDnsServerEntry 5 }


portJumboFrameTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PortJumboFrameEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A list of port jumbo frame entries. The number of
entries is determined by the number of ports in
the system which support the Jumbo frame feature."
	::= { portJumboFrameGrp 1 }


portJumboFrameEntry OBJECT-TYPE
	SYNTAX PortJumboFrameEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Entry containing the jumbo frame configuration  
for a particular port."
	INDEX { portJumboFrameModuleIndex , portJumboFramePortIndex }

	::= { portJumboFrameTable 1 }

portJumboFrameEntry ::=
	SEQUENCE {
		portJumboFrameModuleIndex INTEGER,
		portJumboFramePortIndex INTEGER,
		portJumboFrameEnable INTEGER
		}

portJumboFrameModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies the
module where this port is located."
	::= { portJumboFrameEntry 1 }


portJumboFramePortIndex OBJECT-TYPE
	SYNTAX INTEGER (1..255)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "An index value that uniquely identifies this port
within a module. The value is determined by the
location of the port on the module. Valid entries
are 1 to the value of moduleNumPorts for this
module."
	::= { portJumboFrameEntry 2 }


portJumboFrameEnable OBJECT-TYPE
	SYNTAX INTEGER {
	enabled(1),
	disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates the jumbo frame status of the port. If
enabled, the port supports frame size greater than
the standard ethernet frame size of 1518 bytes."
	::= { portJumboFrameEntry 3 }


switchAccelerationModuleTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SwitchAccelerationModuleEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "This table contains a list of the modules for
which the switch acceleration capability can be
configured."
	::= { switchAccelerationGrp 1 }


switchAccelerationModuleEntry OBJECT-TYPE
	SYNTAX SwitchAccelerationModuleEntry
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "A module for which switch acceleration can be
configured."
	INDEX { switchAccelerationModuleIndex  }

	::= { switchAccelerationModuleTable 1 }

switchAccelerationModuleEntry ::=
	SEQUENCE {
		switchAccelerationModuleIndex INTEGER,
		switchAccelerationModuleEnable TruthValue
		}

switchAccelerationModuleIndex OBJECT-TYPE
	SYNTAX INTEGER (1..16)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The value of moduleIndex for the module where
switch acceleration feature can be configured."
	::= { switchAccelerationModuleEntry 1 }


switchAccelerationModuleEnable OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Indicates whether switch acceleration is enabled
on  this module or not.

When this feature is enabled, the system will 
increase the switching bandwidth, but the 
ifAdminStatus of any port on this module can not
be set to 'up'.

If the ifAdminStatus of any port on this module is
'up', this feature can not be enabled until
ifAdminStatus of all ports on the module is set 
to 'down'."
	::= { switchAccelerationModuleEntry 2 }


configMode OBJECT-TYPE
	SYNTAX INTEGER {
	binary(1),
	text(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Configuration mode to store the configuration
information."
	::= { configGrp 1 }


configTextFileLocation OBJECT-TYPE
	SYNTAX DisplayString (SIZE(0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The location of the text configuration file
which can be either NVRAM or a file in the
FLASH file system. If the location is NVRAM,
this object is a zero length octet string.
Otherwise, the FLASH file should be specified
in <device>:<filename> format. This object
is only instantiated when configMode has
the value of of text(2). "
	::= { configGrp 2 }


configWriteMem OBJECT-TYPE
	SYNTAX TruthValue
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "When this object is set to true(1), the current
configuration is saved in text format in the
location specified by configTextFileLocation.
This object is only instantiated when configMode
has the value of text(2). When read,
this object always returns false(2). "
	::= { configGrp 3 }


configWriteMemStatus OBJECT-TYPE
	SYNTAX INTEGER {
	inProgress(1),
	succeeded(2),
	resourceUnavailable(3),
	badFileName(4),
	someOtherError(5)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The status of the current or the most recently
completed 'write memory' operation. The possible
values are:

inProgress - 'write' operation in progress;

succeeded - the 'write' was successful (this 
value is also used when no write has been
invoked since the last time the local system 
restarted);

resourceUnavailable, -the 'write' failed because
insufficeient resource was available.

badFileName - the 'write' failed because the
specified destination file was not found.
This might be due to invalid FLASH device
name or invalid file name.

someOtherError - the 'write' failed for some 
other reason.

This object is only instantiated when configMode 
has the value of text(2). "
	::= { configGrp 4 }


ciscoStackNotificationsPrefix OBJECT IDENTIFIER ::= { workgroup 0 }

ciscoStackMIBConformance OBJECT IDENTIFIER ::= { ciscoStackMIB 31 }

ciscoStackMIBCompliances OBJECT IDENTIFIER ::= { ciscoStackMIBConformance 1 }

ciscoStackMIBGroups OBJECT IDENTIFIER ::= { ciscoStackMIBConformance 2 }

systemMiscGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 1 }

systemTrapGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 2 }

chassisGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 3 }

moduleGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 4 }

portGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 5 }

optionalSystemMiscGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 6 }

optionalSystemTrapGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 7 }

optionalChassisGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 8 }

optionalModuleGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 9 }

optionalPortGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 10 }

systemTrafficGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 11 }

systemFddiGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 12 }

systemRmonGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 13 }

authenticationGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 14 }

tftpGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 15 }

brouteEnableGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 16 }

filterGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 17 }

monitorGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 18 }

vlanGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 19 }

vmpsGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 20 }

tokenRingGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 21 }

mcastGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 22 }

dnsGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 23 }

syslogGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 24 }

ntpGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 25 }

ipPermitGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 26 }

mdgGatewayGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 27 }

traceRouteGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 28 }

deprecatedObjectGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 29 }

ntpAuthenticationGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 30 }

tokenRingSoftErrorMonitorGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 31 }

portCpbGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 32 }

portSecurityGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 33 }

fileCopyGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 34 }

optionalSystemMiscGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 35 }

ipPermitGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 36 }

optionalSystemMiscGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 37 }

filterGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 38 }

mcastGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 39 }

portGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 40 }

chassisGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 41 }

moduleGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 42 }

portCpbGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 43 }

voiceGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 44 }

portGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 45 }

vlanGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 46 }

portCpbGroup3 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 47 }

moduleGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 48 }

switchAccelerationModuleGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 49 }

optionalSystemMiscGroup3 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 50 }

optionalSystemMiscGroup4 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 51 }

vlanTrunkMappingGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 52 }

portJumboFrameGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 53 }

portCpbGroup4 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 54 }

fileCopyGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 55 }

systemRmonGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 56 }

filterGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 57 }

optionalSystemMiscGroup5 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 58 }

syslogGroup2 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 59 }

systemStatusGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 60 }

configurationGroup OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 61 }

filterGroup3 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 62 }

portGroup3 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 63 }

portCpbGroup5 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 64 }

authenticationGroup1 OBJECT IDENTIFIER ::= { ciscoStackMIBGroups 65 }

lerAlarmOn TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { fddimibPORTSMTIndex, fddimibPORTIndex }
DESCRIPTION "A lerAlarmOn trap signifies that the agent entity
has detected that the fddimibPORTLerFlag object in
the FDDI-SMT73-MIB (RFC 1512) has transitioned to
the true(1) state for one of its ports.
The generation of this trap can be controlled by
the fddimibPORTLerAlarm object in the 
FDDI-SMT73-MIB for each port."
	::= 1


lerAlarmOff TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { fddimibPORTSMTIndex, fddimibPORTIndex }
DESCRIPTION "A lerAlarmOff trap signifies that the agent 
entity has detected that the fddimibPORTLerFlag
object in the FDDI-SMT73-MIB (RFC 1512) has 
transitioned to the false(2) state for one of 
its ports. The generation of this trap can be 
controlled by the fddimibPORTLerAlarm object in 
the FDDI-SMT73-MIB for each port."
	::= 2


moduleUp TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { moduleIndex, moduleType }
DESCRIPTION "A moduleUp trap signifies that the agent entity
has detected that the moduleStatus object in this
MIB has transitioned to the ok(2) state for one of
its modules.
The generation of this trap can be controlled by
the sysEnableModuleTraps object in this MIB."
	::= 3


moduleDown TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { moduleIndex, moduleType }
DESCRIPTION "A moduleDown trap signifies that the agent entity
has detected that the moduleStatus object in this
MIB has transitioned out of the ok(2) state for 
one of its modules.
The generation of this trap can be controlled by
the sysEnableModuleTraps object in this MIB."
	::= 4


chassisAlarmOn TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { chassisTempAlarm, chassisMinorAlarm, chassisMajorAlarm }
DESCRIPTION "A chassisAlarmOn trap signifies that the agent
entity has detected the chassisTempAlarm,
chassisMinorAlarm, or chassisMajorAlarm object in
this MIB has transitioned to the on(2) state.
The generation of this trap can be controlled by
the sysEnableChassisTraps object in this MIB."
	::= 5


chassisAlarmOff TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { chassisTempAlarm, chassisMinorAlarm, chassisMajorAlarm }
DESCRIPTION "A chassisAlarmOff trap signifies that the agent
entity has detected the chassisTempAlarm,
chassisMinorAlarm, or chassisMajorAlarm object in
this MIB has transitioned to the off(1) state.
The generation of this trap can be controlled by
the sysEnableChassisTraps object in this MIB."
	::= 6


ipPermitDeniedTrap TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { ipPermitDeniedAddress, ipPermitDeniedAccess }
DESCRIPTION "ipPermitDeniedTrap indicates that IP permit 
denied access happens. The generation of this 
trap can be controlled by the 
sysEnableIpPermitTraps object in this MIB."
	::= 7


sysConfigChangeTrap TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { sysConfigChangeTime, sysConfigChangeInfo }
DESCRIPTION "A sysConfigChange trap signifies that the system
configuration in NVRAM is changed. The generation
of this trap can be controlled by the 
sysEnableConfigTraps object in this MIB."
	::= 9


tokenRingSoftErrExceededTrap TRAP-TYPE
	ENTERPRISE workgroup
	VARIABLES { ringStationMacAddress, ifIndex, ifName }
DESCRIPTION "This trap is generated when a station local to a 
token ring port exceeds its Soft Error Threshold 
within the configured interval."
	::= 10


END