MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/QOS-POLICY-802-PIB.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

963 lines
32 KiB
Plaintext
Raw Blame History

QOS-POLICY-802-PIB DEFINITIONS ::= BEGIN
IMPORTS
Unsigned32, Integer32,
MODULE-IDENTITY, OBJECT-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue, PhysAddress,
TEXTUAL-CONVENTION, RowStatus, StorageType
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
PolicyInstanceId
FROM POLICY-FRAMEWORK-PIB
Dscp
FROM QOS-POLICY-IP-PIB
policy
FROM SYNOPTICS-ROOT-MIB;
qosPolicy802Pib MODULE-IDENTITY
LAST-UPDATED "200407200000Z"
ORGANIZATION "IETF RAP WG"
CONTACT-INFO "
Michael Fine
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706 USA
Phone: +1 408 527 8218
Email: mfine@cisco.com
Keith McCloghrie
Cisco Systems, Inc.
170 West Tasman Drive,
San Jose, CA 95134-1706 USA
Phone: +1 408 526 5260
Email: kzm@cisco.com
John Seligson
Nortel Networks, Inc.
4401 Great America Parkway
Santa Clara, CA 95054 USA
Phone: +1 408 495 2992
Email: jseligso@nortelnetworks.com"
DESCRIPTION
"The PIB module containing an initial set of policy
rule classes that describe the quality of service
(QoS) policies supported by devices for IEEE 802-
based traffic."
REVISION "200407200000Z" -- 20 July 2004
DESCRIPTION "Version 3: Added version info"
::= { policy 3 }
qosPolicy802PibClasses OBJECT IDENTIFIER ::= { qosPolicy802Pib 1 }
--
-- Textual Conventions
--
--
-- IEEE 802 CoS
--
QosIeee802Cos ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An integer that is in the range of the IEEE 802 CoS
values. This corresponds to the 802.1p priority values."
SYNTAX INTEGER (0..7)
--
-- General configuration information for the entire domain
--
qos802DomainConfig OBJECT IDENTIFIER ::= { qosPolicy802PibClasses 1 }
--
-- Differentiated Services Code Point Mapping Table
--
-- Supports the mapping of DSCP values to IEEE CoS values.
--
qos802DscpMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qos802DscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maps each DSCP to an QosIeee802Cos. When configured
for the first time, all 64 entries of the table must
be specified. Thereafter, instances may be modified but
not deleted unless all instances are deleted."
::= { qos802DomainConfig 1 }
qos802DscpMappingEntry OBJECT-TYPE
SYNTAX Qos802DscpMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of the qos802DscpMapping class. A total of 64
class instances are constantly maintained after initial device
configuration."
INDEX { qos802DscpMappingId }
::= { qos802DscpMappingTable 1 }
Qos802DscpMappingEntry ::= SEQUENCE {
qos802DscpMappingId PolicyInstanceId,
qos802DscpMappingDscp Dscp,
qos802DscpMapping802Cos QosIeee802Cos,
qos802DscpMappingStorageType StorageType,
qos802DscpMappingStatus RowStatus
}
qos802DscpMappingId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique ID for this policy rule instance."
::= { qos802DscpMappingEntry 1 }
qos802DscpMappingDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP class instance attribute that is used to
determine the appropriate Layer 2 CoS mappings. DSCP
values 0 through 63 (inclusive) are maintained in
the table."
::= { qos802DscpMappingEntry 2 }
qos802DscpMapping802Cos OBJECT-TYPE
SYNTAX QosIeee802Cos
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The IEEE 802 CoS value to use when mapping the DSCP
value specified by the qos802DscpMappingDscp attribute
to a IEEE 802 CoS."
::= { qos802DscpMappingEntry 3 }
qos802DscpMappingStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qos802DscpMappingStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qos802DscpMappingEntry 4 }
qos802DscpMappingStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qos802DscpMappingEntry 5 }
--
-- Layer 2 CoS-to-DSCP Mapping Table
--
-- Supports the mapping of IEEE CoS values to DSCP values
-- for generic QoS traffic classification
--
qos802CosToDscpTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qos802CosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Maps each of eight Layer 2 CoS values to a DSCP. When
configured for the first time, all 8 entries of the table
must be specified. Thereafter, instances may be modified
but not deleted unless all instances are deleted."
::= { qos802DomainConfig 2 }
qos802CosToDscpEntry OBJECT-TYPE
SYNTAX Qos802CosToDscpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An instance of the qosCosToDscp class. A total of 8
class instances are constantly maintained after initial
device configuration."
INDEX { qos802CosToDscpId }
::= { qos802CosToDscpTable 1 }
Qos802CosToDscpEntry ::= SEQUENCE {
qos802CosToDscpId PolicyInstanceId,
qos802CosToDscpCos QosIeee802Cos,
qos802CosToDscpDscp Dscp,
qos802CosToDscpStorageType StorageType,
qos802CosToDscpStatus RowStatus
}
qos802CosToDscpId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique ID for this policy rule instance."
::= { qos802CosToDscpEntry 1 }
qos802CosToDscpCos OBJECT-TYPE
SYNTAX QosIeee802Cos
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Layer 2 CoS class instance attribute that is used to
determine the appropriate DSCP mappings. CoS values 0
through 7 (inclusive) are maintained in the table."
::= { qos802CosToDscpEntry 2 }
qos802CosToDscpDscp OBJECT-TYPE
SYNTAX Dscp
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DSCP value to use when mapping the Layer 2 CoS value
specified by the qosCosToDscp attribute to a DSCP."
::= { qos802CosToDscpEntry 3 }
qos802CosToDscpStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qos802CosToDscpStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qos802CosToDscpEntry 4 }
qos802CosToDscpStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qos802CosToDscpEntry 5 }
--
-- The IEEE 802 Classification and Policing Group
--
qos802Qos OBJECT IDENTIFIER ::= { qosPolicy802PibClasses 2 }
--
-- The IEEE 802 ACE Table
--
-- The IEEE 802 ACE Table supports the specification of IEEE
-- 802-based (e.g., 802.3) information that is used to perform
-- traffic classification.
--
qos802AceTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qos802AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802-based ACE definitions. A class that contains
attributes of IEEE 802 (e.g., 802.3) traffic that form
an association that is used to perform traffic
classification."
::= { qos802Qos 1 }
qos802AceEntry OBJECT-TYPE
SYNTAX Qos802AceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802-based ACE definitions. An entry specifies
(potentially) several distinct matching components. Each
component is tested against the data in a frame
individually. An overall match occurs when all of the
individual components match the data they are compared
against in the frame being processed. A failure of any
one test causes the overall match to fail.
Wildcards may be specified for those fields that are not
relevant."
INDEX { qos802AceId }
::= { qos802AceTable 1 }
Qos802AceEntry ::= SEQUENCE {
qos802AceId PolicyInstanceId,
qos802AceDstAddr PhysAddress,
qos802AceDstAddrMask PhysAddress,
qos802AceSrcAddr PhysAddress,
qos802AceSrcAddrMask PhysAddress,
qos802AceVlanId Integer32,
qos802AceVlanTagRequired INTEGER,
qos802AceEtherType Integer32,
qos802AceUserPriority BITS,
qos802AcePermit TruthValue,
qos802AceStorageType StorageType,
qos802AceStatus RowStatus
}
qos802AceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies this
802 ACE among all of the 802 ACEs. Note that this identifier
is used in instances of the qos802Acl class to associate a
802 ACE with a 802 ACL. An active ACE/ACL association
prohibits the deletion of the 802 ACE until the ACE/ACL
association is terminated. Class instances may not be
contiguous."
::= { qos802AceEntry 1 }
qos802AceDstAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The 802 address against which the 802 DA of incoming traffic
streams will be compared. Frames whose 802 DA matches the
physical address specified by this object, taking into account
address wildcarding as specified by the qos802AceDstAddrMask
object, are potentially subject to the processing guidelines
that are associated with this entry through the related
action class."
::= { qos802AceEntry 2 }
qos802AceDstAddrMask OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the bits in a 802 destination address
that should be considered when performing a 802 DA comparison
against the address specified in the qos802AceDstAddr object.
The value of this object represents a mask that is logically
and'ed with the 802 DA in received frames to derive the value
to be compared against the qos802AceDstAddr address. A zero
bit in the mask thus means that the corresponding bit in the
address always matches. The qos802AceDstAddr value must also
be masked using this value prior to any comparisons.
The length of this object in octets must equal the length in
octets of the qos802AceDstAddr. Note that a mask with no bits
set (i.e., all zeroes) effectively wildcards the
qos802AceDstAddr object."
::= { qos802AceEntry 3 }
qos802AceSrcAddr OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The 802 MAC address against which the 802 MAC SA of incoming
traffic streams will be compared. Frames whose 802 MAC SA
matches the physical address specified by this object,
taking into account address wildcarding as specified by the
qos802AceSrcAddrMask object, are potentially subject to the
processing guidelines that are associated with this entry
through the related action class."
::= { qos802AceEntry 4 }
qos802AceSrcAddrMask OBJECT-TYPE
SYNTAX PhysAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the bits in a 802 MAC source address
that should be considered when performing a 802 MAC SA
comparison against the address specified in the
qos802AceSrcAddr object.
The value of this object represents a mask that is logically
and'ed with the 802 MAC SA in received frames to derive the
value to be compared against the qos802AceSrcAddr address. A
zero bit in the mask thus means that the corresponding bit
in the address always matches. The qos802AceSrcAddr value
must also be masked using this value prior to any
comparisons.
The length of this object in octets must equal the length in
octets of the qos802AceSrcAddr. Note that a mask with no bits
set (i.e., all zeroes) effectively wildcards the
qos802AceSrcAddr object."
::= { qos802AceEntry 5 }
qos802AceVlanId OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VLAN ID (VID) that uniquely identifies a VLAN
within the device. This VLAN may be known or unknown
(i.e., traffic associated with this VID has not yet
been seen by the device) at the time this entry
is instantiated.
Setting the qos802AceVlanId object to -1 indicates that
VLAN data should not be considered during traffic
classification."
::= { qos802AceEntry 6 }
qos802AceVlanTagRequired OBJECT-TYPE
SYNTAX INTEGER {
taggedOnly(1),
priorityTagged(2),
untaggedOnly(3),
ignoreTag(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether the presence of an
IEEE 802.1Q VLAN tag in data link layer frames must
be considered when determining if a given frame
matches this 802 ACE entry.
A value of 'taggedOnly(1)' means that only frames
containing a VLAN tag with a non-Null VID (i.e., a
VID in the range 1..4094) will be considered a match.
A value of 'priorityTaggedPlus(2)' means that only
frames containing a VLAN tag, regardless of the value
of the VID, will be considered a match.
A value of 'untaggedOnly(3)' indicates that only
untagged frames will match this filter component.
The presence of a VLAN tag is not taken into
consideration in terms of a match if the value is
'ignoreTag(4)'."
::= { qos802AceEntry 7 }
qos802AceEtherType OBJECT-TYPE
SYNTAX Integer32 (-1 | 0..'ffff'h)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the value that will be compared
against the value contained in the EtherType field of an
IEEE 802 frame. Example settings would include 'IP'
(0x0800), 'ARP' (0x0806) and 'IPX' (0x8137).
Setting the qos802AceEtherType object to -1 indicates
that EtherType data should not be considered during traffic
classification.
Note that the position of the EtherType field depends on
the underlying frame format. For Ethernet-II encapsulation,
the EtherType field follows the 802 MAC source address. For
802.2 LLC/SNAP encapsulation, the EtherType value follows the
Organization Code field in the 802.2 SNAP header. The value
that is tested with regard to this filter component therefore
depends on the data link layer frame format being used. If
this 802 ACE component is active when there is no EtherType
field in a frame (e.g., 802.2 LLC), a match is implied."
::= { qos802AceEntry 8 }
qos802AceUserPriority OBJECT-TYPE
SYNTAX BITS {
matchPriority0(0),
matchPriority1(1),
matchPriority2(2),
matchPriority3(3),
matchPriority4(4),
matchPriority5(5),
matchPriority6(6),
matchPriority7(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The set of values, representing the potential range
of user priority values, against which the value contained
in the user priority field of a tagged 802.1 frame is
compared. A test for equality is performed when determining
if a match exists between the data in a data link layer
frame and the value of this 802 ACE component. Multiple
values may be set at one time such that potentially several
different user priority values may match this 802 ACE
component.
Setting all of the bits that are associated with this
object causes all user priority values to match this
attribute. This essentially makes any comparisons
with regard to user priority values unnecessary. Untagged
frames are treated as an implicit match."
::= { qos802AceEntry 9 }
qos802AcePermit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If the frame matches this ACE and the value of this
attribute is true, then the matching process terminates
and the QoS associated with this 802-based ACE (indirectly
through the 802 ACL) is applied to the packet. If the
value of this attribute is false, then no more 802 ACEs in
this 802 ACL are compared to this packet and matching
continues with the first 802-based ACE of the next 802 ACL."
::= { qos802AceEntry 10 }
qos802AceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qos802AceStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qos802AceEntry 11 }
qos802AceStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qos802AceEntry 12 }
--
-- The IEEE 802 ACL Definition Table
--
-- The IEEE 802 ACL Definition Table supports the association of
-- distinct IEEE 802-based (e.g., 802.3) traffic classification
-- specifications into an ordered list.
--
qos802AclDefinitionTable OBJECT-TYPE
SYNTAX SEQUENCE OF Qos802AclDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802-based ACL definitions. A class that defines a
set of 802 ACLs, each of which is comprised of an ordered
list of 802 ACEs."
::= { qos802Qos 2 }
qos802AclDefinitionEntry OBJECT-TYPE
SYNTAX Qos802AclDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IEEE 802-based ACL definitions. An entry specifies an
instance of this class that associates an 802 ACE with
a given 802 ACL. The evaluation order of distinct 802
ACEs that are associated with a specific 802 ACL is
specified as well."
INDEX { qos802AclDefinitionId }
::= { qos802AclDefinitionTable 1 }
Qos802AclDefinitionEntry ::= SEQUENCE {
qos802AclDefinitionId PolicyInstanceId,
qos802AclDefinitionAclId PolicyInstanceId,
qos802AclDefinitionAceId PolicyInstanceId,
qos802AclDefinitionAceOrder Unsigned32,
qos802AclDefinitionStorageType StorageType,
qos802AclDefinitionStatus RowStatus,
qos802AclDefinitionLabel SnmpAdminString
}
qos802AclDefinitionId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer index that uniquely identifies this
802 ACE / 802 ACL association."
::= { qos802AclDefinitionEntry 1 }
qos802AclDefinitionAclId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An index for this 802 ACL. Each 802 ACL in the device is
assigned a unique integer index. There will (potentially) be
multiple instances of the qos802AclDefinition class with this
identifier, one for each 802 ACE that is associated with the
specified 802 ACL.
For example, assume that 2 802 ACLs, each comprised of 4 802
ACEs, have been installed. The instances of this class may
appear as follows:
Index AclId AceId AceOrder
10 6 4 1
11 6 5 2
12 6 9 23
13 6 11 24
65 18 5 8
66 18 9 12
67 18 13 15
70 18 14 16
Note that this identifier is used in instances of the
qosAclTarget class to associate an 802 ACL with an interface
set and action. An active ACL Target association prohibits
the deletion of all of the qos802AclDefinition instances
with a given qos802AclDefinitionAclId (i.e., at least one
entry for the specific qos802AclDefinitionAclId must be
present in this table) until the ACL Target association is
terminated."
::= { qos802AclDefinitionEntry 2 }
qos802AclDefinitionAceId OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute identifies the 802 ACE in the qos802AceTable
that is associated with the 802 ACL specified by
qos802AclDefinitionAclId object. The corresponding instance
in the qos802Ace class must exist prior to being associated
with a 802 ACL.
Attempting to specify an unknown class instance will result
in an appropriate error indication being returned to the
entity that is attempting to install the conflicting entry.
For example, a 'priUnknown(2)' error indication is returned
to the policy server in this situation."
::= { qos802AclDefinitionEntry 3 }
qos802AclDefinitionAceOrder OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The precedence of the 802 ACE, identified via the
qos802AclDefinitionAceId object, with regard to evaluation
order. The precedence determines the order of evaluation of
this ACE in relation to related 802 ACEs that are associated
with an ACL. An ACE with a given precedence order in the
access control list is evaluated before one with a higher-
valued precedence order.
Precedence values within a group must be unique otherwise
instance installation will be prohibited and an error
value will be returned.
Note that qos802AclDefinitionAceOrder values within a given
ACL need not be contiguous."
::= { qos802AclDefinitionEntry 4 }
qos802AclDefinitionStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
qos802AclDefinitionStatus object is equal to active(1)."
DEFVAL { volatile }
::= { qos802AclDefinitionEntry 5 }
qos802AclDefinitionStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { qos802AclDefinitionEntry 6 }
qos802AclDefinitionLabel OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A label used to reference the filter group in a textual
manner. All members of the same group, as determined by
the value of the qos802AclDefinitionAclId attribute,
must have the same label."
::= { qos802AclDefinitionEntry 7 }
--
-- Conformance Section
--
qosPolicy802PibConformance
OBJECT IDENTIFIER ::= { qosPolicy802Pib 2 }
qosPolicy802PibCompliances
OBJECT IDENTIFIER ::= { qosPolicy802PibConformance 1 }
qosPolicy802PibGroups
OBJECT IDENTIFIER ::= { qosPolicy802PibConformance 2 }
qosPolicy802PibCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the
QoS Policy 802 PIB."
MODULE -- this module
GROUP qos802DscpMappingGroup
DESCRIPTION
"The qos802DscpMappingGroup is mandatory if mapping
from DSCP to 802.1 user priority is supported."
OBJECT qos802DscpMappingDscp
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802DscpMapping802Cos
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802DscpMappingStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qos802DscpMappingStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
GROUP qos802CosToDscpGroup
DESCRIPTION
"The qos802CosToDscpGroup is mandatory if mapping
from 802.1 user priority to DSCP is supported."
OBJECT qos802CosToDscpCos
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802CosToDscpDscp
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802CosToDscpStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qos802CosToDscpStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
GROUP qos802AceGroup
DESCRIPTION
"The qos802AceGroup is mandatory if filtering
based on 802 traffic criteria is supported."
OBJECT qos802AceDstAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceDstAddrMask
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceSrcAddr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceSrcAddrMask
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceVlanId
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceVlanTagRequired
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceEtherType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceUserPriority
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AcePermit
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AceStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qos802AceStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
GROUP qos802AclDefinitionGroup
DESCRIPTION
"The qos802AclDefinitionGroup is mandatory if
filtering based on 802 traffic criteria is supported."
OBJECT qos802AclDefinitionAclId
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AclDefinitionAceId
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AclDefinitionAceOrder
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AclDefinitionStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT qos802AclDefinitionStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT qos802AclDefinitionLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { qosPolicy802PibCompliances 1 }
qos802DscpMappingGroup OBJECT-GROUP
OBJECTS {
qos802DscpMappingDscp,
qos802DscpMapping802Cos,
qos802DscpMappingStorageType,
qos802DscpMappingStatus
}
STATUS current
DESCRIPTION
"Objects from the qos802DscpMappingTable."
::= { qosPolicy802PibGroups 1 }
qos802CosToDscpGroup OBJECT-GROUP
OBJECTS {
qos802CosToDscpCos,
qos802CosToDscpDscp,
qos802CosToDscpStorageType,
qos802CosToDscpStatus
}
STATUS current
DESCRIPTION
"Objects from the qos802CosToDscpTable."
::= { qosPolicy802PibGroups 2 }
qos802AceGroup OBJECT-GROUP
OBJECTS {
qos802AceDstAddr,
qos802AceDstAddrMask,
qos802AceSrcAddr,
qos802AceSrcAddrMask,
qos802AceVlanId,
qos802AceVlanTagRequired,
qos802AceEtherType,
qos802AceUserPriority,
qos802AcePermit,
qos802AceStorageType,
qos802AceStatus
}
STATUS current
DESCRIPTION
"Objects from the qos802AceTable."
::= { qosPolicy802PibGroups 3 }
qos802AclDefinitionGroup OBJECT-GROUP
OBJECTS {
qos802AclDefinitionAclId,
qos802AclDefinitionAceId,
qos802AclDefinitionAceOrder,
qos802AclDefinitionStorageType,
qos802AclDefinitionStatus,
qos802AclDefinitionLabel
}
STATUS current
DESCRIPTION
"Objects from the qos802AclDefinitionTable."
::= { qosPolicy802PibGroups 4 }
END
Reference in New Issue View Git Blame Copy Permalink