MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/PNNI-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

5215 lines
194 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ATM PNNI MIB
--
-- July 1997, Yehuda Bamnolker (ybamnolk@cisco.com)
--
-- Copyright (c) 1997, 1998,2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
-- Following Changes are made for the ATM Forum MIB version:
-- * Removed Unsigned32, zeroDotZero TEXTUAL CONVENTION
-- * Importing Unsigned32, zeroDotZero from SNMPv2-SMI
-- * Importing AtmTrafficDescrParamIndex FROM ATM-TC-MIB
-- (It was imported earlier from ATM-MIB)
-- * Not Importing OBJECT-IDENTITY since it is not used.
PNNI-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Gauge32, Integer32, enterprises,
Unsigned32, zeroDotZero
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, DisplayString,
TimeStamp, TruthValue
FROM SNMPv2-TC
InterfaceIndex, ifIndex
FROM IF-MIB
AtmTrafficDescrParamIndex
FROM ATM-TC-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
pnniMIB MODULE-IDENTITY
LAST-UPDATED "200204240000Z"
ORGANIZATION "The ATM Forum"
CONTACT-INFO
"The ATM Forum
2570 West El Camino Real, Suite 304
Mountain View, CA 94040-1313 USA
Phone: +1 415-949-6700
Fax: +1 415-949-6705
info@atmforum.com"
DESCRIPTION
"The MIB module for managing ATM Forum PNNI routing."
REVISION "200204240000Z"
DESCRIPTION
"Removed Following TEXTUAL CONVENTION definitions:
Unsigned32
zeroDotZero.
Importing Following from SNMPv2-SMI.
Unsigned32
zeroDotZero."
REVISION "9703010000Z"
DESCRIPTION
"Updated version of the PNNI MIB released with the PNNI
V1.0 Errata and PICS (af-pnni-81.00)."
REVISION "9602270000Z"
DESCRIPTION
"Initial version of the MIB for monitoring and controlling
PNNI routing."
::= { atmfPnni 1 }
-- The object identifier subtree for ATM Forum PNNI MIBs
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 }
atmfPnni OBJECT IDENTIFIER ::= { atmForumNetworkManagement 4 }
pnniMIBObjects OBJECT IDENTIFIER ::= { pnniMIB 1 }
PnniAtmAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity. The address
types are: no address (0 octets), and NSAP (20 octets)."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.2"
SYNTAX OCTET STRING (SIZE(0|20))
PnniNodeIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An index that identifies a logical PNNI entity within the
managed system.
The distinguished value zero indicates the null instance or
no instance in the PnniNodeCfgParentNodeIndex. In all
other cases, the distinguished value zero indicates a
logical entity within the switching system that manages
routes only over non-PNNI interfaces.
By default, only the node identified by node index one is
created, and all PNNI interfaces are associated with that
node."
SYNTAX Integer32 (0..65535)
PnniNodeId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A PNNI node ID - this is used to identify the logical PNNI
node."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.3"
SYNTAX OCTET STRING (SIZE(22))
PnniPortId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A PNNI port ID - this is used to identify a point of
attachment of a logical link to a given logical node.
The values 0 and 0xffffffff have special meanings in
certain contexts and do not identify a specific port.
The distinguished value 0 indicates that no port is
specified."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.4"
SYNTAX Unsigned32
PnniAggrToken ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A PNNI aggregation token - this is used to determine which
links to a given neighbor node are to be aggregated and
advertised as a single logical link."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.5"
SYNTAX Unsigned32
PnniPeerGroupId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A PNNI peer group ID."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.2"
SYNTAX OCTET STRING (SIZE(14))
PnniLevel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A PNNI routing level indicator."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.1"
SYNTAX Integer32 (0..104)
PnniSvccRccIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of this object identifies the SVCC-based RCC for
which the entry contains management information."
SYNTAX Integer32
AtmAddrPrefix ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A prefix of one or more ATM End System Addresses. The
significant portion of a prefix is padded with zeros on the
right to fill 19 octets."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.2"
SYNTAX OCTET STRING (SIZE(19))
PnniPrefixLength ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The number of bits that are significant in an ATM address
prefix used by PNNI."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.2"
SYNTAX Integer32 (0..152)
PnniMetricsTag ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"An index into the pnniMetricsTable. The suffix tag is used
to indicate that there may be many related entries in the
table further discriminated by other index terms. The
distinguished value zero indicates that no metrics are
associated with the described entity."
SYNTAX Integer32 (0..2147483647)
ServiceCategory ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the service category."
REFERENCE
"ATM Forum Traffic Management 4.0 Section 2"
SYNTAX INTEGER { other(1),
cbr(2),
rtVbr(3),
nrtVbr(4),
abr(5),
ubr(6) }
ClpType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the CLP type of a traffic stream."
SYNTAX INTEGER { clpEqual0(1), clpEqual0Or1(2) }
TnsType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the type of network identification of a
specified transit network."
REFERENCE
"ATM Forum UNI Signalling 4.0 Section 2 4.5.22/Q.2931"
SYNTAX INTEGER { nationalNetworkIdentification(2),
other(8) }
TnsPlan ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates the network identification plan of a
specified transit network."
REFERENCE
"ATM Forum UNI Signalling 4.0 Section 2 4.5.22/Q.2931"
SYNTAX INTEGER { carrierIdentificationCode(1),
other(16) }
PnniVersion ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates a version of the PNNI protocol."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.6.1"
SYNTAX INTEGER { unsupported(1), version1point0(2) }
PnniHelloState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The state of an instance of the PNNI Hello State machine."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.6.2.1.2"
SYNTAX INTEGER {
notApplicable(1),
down(2),
attempt(3),
oneWayInside(4),
twoWayInside(5),
oneWayOutside(6),
twoWayOutside(7),
commonOutside(8)
}
-- the base group
pnniBaseGroup OBJECT IDENTIFIER ::= { pnniMIBObjects 1 }
pnniHighestVersion OBJECT-TYPE
SYNTAX PnniVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The highest version of the PNNI protocol that the
software in this switching system is capable of executing."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.6.1"
::= { pnniBaseGroup 1 }
pnniLowestVersion OBJECT-TYPE
SYNTAX PnniVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The lowest version of the PNNI Protocol that the
software in this switching system is capable of executing."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.6.1"
::= { pnniBaseGroup 2 }
pnniDtlCountOriginator OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of DTL stacks that this switching system
has originated as the DTLOriginator and placed into
signalling messages. This includes the initial DTL stacks
computed by this system as well as any alternate route
(second, third choice etc.) DTL stacks computed by this
switching system in response to crankbacks."
::= { pnniBaseGroup 3 }
pnniDtlCountBorder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of partial DTL stacks that this switching system
has added into signalling messages as an entry border node.
This includes the initial partial DTL stacks computed by
this system as well as any alternate route (second, third
choice etc.) partial DTL stacks computed by this switching
system in response to crankbacks."
::= { pnniBaseGroup 4 }
pnniCrankbackCountOriginator OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the total number of connection setup messages
including DTL stacks originated by this switching system
that have cranked back to this switching system at all
levels of the hierarchy."
::= { pnniBaseGroup 5 }
pnniCrankbackCountBorder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The count of the total number of connection setup messages
including DTLs added by this switching system as an entry
border node that have cranked back to this switching system
at all levels of the hierarchy. This count does not include
Crankbacks for which this switching system was not the
crankback destination, only those crankbacks that were
directed to this switching system are counted here."
::= { pnniBaseGroup 6 }
pnniAltRouteCountOriginator OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of alternate DTL stacks that this
switching system has computed and placed into
signalling messages as the DTLOriginator."
::= { pnniBaseGroup 7 }
pnniAltRouteCountBorder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of alternate partial DTL stacks that this
switching system has computed and placed into signalling
messages as an entry border node."
::= { pnniBaseGroup 8 }
pnniRouteFailCountOriginator OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times where the switching system failed
to compute a viable DTL stack as the DTLOriginator for some
call. It indicates the number of times a call was cleared
from this switching system due to originator routing
failure."
::= { pnniBaseGroup 9 }
pnniRouteFailCountBorder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times where the switching system failed
to compute a viable partial DTL stack as an entry border
node for some call. It indicates the number of times a
call was either cleared or cranked back from this switching
system due to border routing failure."
::= { pnniBaseGroup 10 }
pnniRouteFailUnreachableOriginator OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times where the switching system failed
to compute a viable DTL stack as the DTLOriginator because
the destination was unreachable, i.e., those calls that are
cleared with cause #2 `specified transit network
unreachable' or cause #3 `destination unreachable' in the
cause IE."
::= { pnniBaseGroup 11 }
pnniRouteFailUnreachableBorder OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times where the switching system failed
to compute a viable partial DTL stack as an entry border
node because the target of the path calculation was
unreachable, i.e., those calls that are cleared or cranked
back with cause #2 `specified transit network unreachable'
or cause #3 `destination unreachable' in the cause IE."
::= { pnniBaseGroup 12 }
-- node table
pnniNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pnniNodeTable collects attributes that affect the
operation of a PNNI logical node.
There is a single row in this table for each PNNI peer
group that the managed system is expected or eligible
to become a member of."
REFERENCE
"ATM Forum PNNI 1.0 Annex F"
::= { pnniMIBObjects 2 }
pnniNodeEntry OBJECT-TYPE
SYNTAX PnniNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a PNNI
logical node in this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Annex F"
INDEX { pnniNodeIndex }
::= { pnniNodeTable 1 }
PnniNodeEntry ::=
SEQUENCE {
pnniNodeIndex PnniNodeIndex,
pnniNodeLevel PnniLevel,
pnniNodeId PnniNodeId,
pnniNodeLowest TruthValue,
pnniNodeAdminStatus INTEGER,
pnniNodeOperStatus INTEGER,
pnniNodeDomainName DisplayString,
pnniNodeAtmAddress PnniAtmAddr,
pnniNodePeerGroupId PnniPeerGroupId,
pnniNodeRestrictedTransit TruthValue,
pnniNodeComplexRep TruthValue,
pnniNodeRestrictedBranching TruthValue,
pnniNodeDatabaseOverload TruthValue,
pnniNodePtses Gauge32,
pnniNodeRowStatus RowStatus
}
pnniNodeIndex OBJECT-TYPE
SYNTAX PnniNodeIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value assigned to a node in this switching system that
uniquely identifies it in the MIB."
::= { pnniNodeEntry 1 }
pnniNodeLevel OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The level of PNNI hierarchy at which this node exists. This
attribute is used to determine the default node ID and the
default peer group ID for this node. This object may only
be written when pnniNodeAdminStatus has the value down."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.1, Annex F"
DEFVAL { 96 }
::= { pnniNodeEntry 2 }
pnniNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value the switching system is using to represent
itself as this node. This object may only be written when
pnniNodeAdminStatus has the value down.
If pnniNodeLowest is true, then the default node ID takes
the form defined in Section 5.3.3 for lowest level nodes,
with the first octet equal to pnniNodeLevel, the second
octet equal to 160, and the last 20 octets equal to
pnniNodeAtmAddress.
If pnniNodeLowest is false, then the default
node ID takes the form defined in Section 5.3.3 for logical
group nodes, with the first octet equal to pnniNodeLevel,
the next fourteen octets equal to the value of
pnniNodePeerGroupId for the child node whose election as
PGL causes this LGN to be instantiated, the next six octets
equal to the ESI of pnniNodeAtmAddress, and the last octet
equal to zero."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.3, Annex F"
::= { pnniNodeEntry 3 }
pnniNodeLowest OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether this node acts as a lowest level node or
whether this node is a logical group node that becomes
active when one of the other nodes in this switching system
becomes a peer group leader. The value 'false' must not be
used with nodes that are not PGL/LGN capable.
This object may only be
written when pnniNodeAdminStatus has the value down."
DEFVAL { true }
::= { pnniNodeEntry 4 }
pnniNodeAdminStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the administrative status of the node is
up (the node is allowed to become active) or down (the node
is forced to be inactive).
When pnniNodeAdminStatus is down, then pnniNodeOperStatus
must also be down."
DEFVAL { up }
::= { pnniNodeEntry 5 }
pnniNodeOperStatus OBJECT-TYPE
SYNTAX INTEGER { up(1), down(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the node is active or whether the node
has yet to become operational. When the value is down, all
state has been cleared from the node and the node is not
communicating with any of its neighbor nodes."
::= { pnniNodeEntry 6 }
pnniNodeDomainName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the PNNI routing
domain in which this node participates. All lowest-level
PNNI nodes with the same pnniNodeDomainName are presumed to
be connected."
DEFVAL { "" }
::= { pnniNodeEntry 7 }
pnniNodeAtmAddress OBJECT-TYPE
SYNTAX PnniAtmAddr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This node's ATM End System Address. Remote systems wishing
to exchange PNNI protocol packets with this node should
direct packets or calls to this address.
This attribute may only be written when pnniNodeAdminStatus
has the value down."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.2.2"
::= { pnniNodeEntry 8 }
pnniNodePeerGroupId OBJECT-TYPE
SYNTAX PnniPeerGroupId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Peer Group Identifier of the peer group that the given
node is to become a member of.
The default value of this attribute has the first octet
equal to pnniNodeLevel, the next pnniNodeLevel bits equal
to the pnniNodeLevel bits starting from the third octet of
pnniNodeId, and the remainder padded with zeros.
This object may only be written when pnniNodeAdminStatus
has the value down."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.2, Annex F"
::= { pnniNodeEntry 9 }
pnniNodeRestrictedTransit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether the node is restricted to not allowing
support of SVCs transiting this node. This attribute
determines the setting of the restricted transit bit in the
nodal information group originated by this node."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.2.3"
DEFVAL { false }
::= { pnniNodeEntry 10 }
pnniNodeComplexRep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies whether this node uses the complex node
representation. A value of `true' indicates that the
complex node representation is used, whereas a value of
`false' indicates that the simple node representation is
used. This attribute determines the setting of the nodal
representation bit in the nodal information group
originated by this node."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.2.3"
::= { pnniNodeEntry 11 }
pnniNodeRestrictedBranching OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the node is able to support additional
point-to-multipoint branches. A value of 'false' indicates
that additional branches can be supported, and a value of
'true' indicates that additional branches cannot be
supported. This attribute reflects the setting of the
restricted branching bit in the nodal information group
originated by this node."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.2.3"
::= { pnniNodeEntry 12}
pnniNodeDatabaseOverload OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies whether the node is currently operating in
topology database overload state. This attribute has the
same value as the Non-transit for PGL Election bit in the
nodal information group originated by this node."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.2.3"
::= { pnniNodeEntry 13 }
pnniNodePtses OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Gauges the total number of PTSEs currently in this
node's topology database(s)."
::= { pnniNodeEntry 14 }
pnniNodeRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, activate and de-activate a Node."
::= { pnniNodeEntry 15 }
-- PGL election table
pnniNodePglTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniNodePglEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Peer group leader election information for a PNNI node in
this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.10.1"
::= { pnniMIBObjects 3 }
pnniNodePglEntry OBJECT-TYPE
SYNTAX PnniNodePglEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing PGL election information
of a PNNI logical node in this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.10.1"
AUGMENTS { pnniNodeEntry }
::= { pnniNodePglTable 1 }
PnniNodePglEntry ::=
SEQUENCE {
pnniNodePglLeadershipPriority INTEGER,
pnniNodeCfgParentNodeIndex PnniNodeIndex,
pnniNodePglInitTime Integer32,
pnniNodePglOverrideDelay Integer32,
pnniNodePglReelectTime Integer32,
pnniNodePglState INTEGER,
pnniNodePreferredPgl PnniNodeId,
pnniNodePeerGroupLeader PnniNodeId,
pnniNodePglTimeStamp TimeStamp,
pnniNodeActiveParentNodeId PnniNodeId
}
pnniNodePglLeadershipPriority OBJECT-TYPE
SYNTAX INTEGER (0..205)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The Leadership priority value this node should advertise in
its nodal information group for the given peer group. Only
the value zero can be used with nodes that are not PGL/LGN
capable. If there is no configured parent node index or no
corresponding entry in the pnniNodeTable, then the
advertised leadership priority is zero regardless of this
value."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.10.1.2"
DEFVAL { 0 }
::= { pnniNodePglEntry 1 }
pnniNodeCfgParentNodeIndex OBJECT-TYPE
SYNTAX PnniNodeIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local node index used to identify the node that will
represent this peer group at the next higher level of
hierarchy, if this node becomes peer group leader. The
value 0 indicates that there is no parent node."
REFERENCE
"ATM Forum PNNI 1.0 Annex F"
DEFVAL { 0 }
::= { pnniNodePglEntry 2 }
pnniNodePglInitTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time in seconds this node will delay
advertising its choice of preferred PGL after having
initialized operation and reached the full state with at
least one neighbor in the peer group."
REFERENCE
"ATM Forum PNNI 1.0 Annex G PGLInitTime"
DEFVAL { 15 }
::= { pnniNodePglEntry 3 }
pnniNodePglOverrideDelay OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time in seconds a node will wait for itself
to be declared the preferred PGL by unanimous agreement
among its peers. In the absence of unanimous agreement
this will be the amount of time that will pass before this
node considers a two thirds majority as sufficient
agreement to declare itself peer group leader, abandoning
the attempt to get unanimous agreement."
REFERENCE
"ATM Forum PNNI 1.0 Annex G OverrideDelay"
DEFVAL { 30 }
::= { pnniNodePglEntry 4 }
pnniNodePglReelectTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time in seconds after losing connectivity to
the current peer group leader, that this node will wait
before re-starting the process of electing a new peer group
leader."
REFERENCE
"ATM Forum PNNI 1.0 Annex G ReElectionInterval"
DEFVAL { 15 }
::= { pnniNodePglEntry 5 }
pnniNodePglState OBJECT-TYPE
SYNTAX INTEGER {
starting(1),
awaiting(2),
awaitingFull(3),
initialDelay(4),
calculating(5),
awaitUnanimity(6),
operPgl(7),
operNotPgl(8),
hungElection(9),
awaitReElection(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state that this node is in with respect to
the Peer Group Leader election that takes place in the
node's peer group. The values are enumerated in the Peer
Group Leader State Machine."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.10.1.1.2"
::= { pnniNodePglEntry 6 }
pnniNodePreferredPgl OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Node ID of
the node which the local node believes should be or become
the peer group leader. This is also the value the local
node is currently advertising in the `Preferred Peer Group
Leader Node ID' field of its nodal information group within
the given peer group. If a Preferred PGL has not been
chosen, this attribute's value is set to (all) zero(s)."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.10.1.1.6"
::= { pnniNodePglEntry 7 }
pnniNodePeerGroupLeader OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Node Identifier of the node which is currently
operating as peer group leader of the peer group this node
belongs to. If a PGL has not been elected, this attribute's
value is set to (all) zero(s)."
::= { pnniNodePglEntry 8 }
pnniNodePglTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which the current Peer Group Leader established
itself."
::= { pnniNodePglEntry 9 }
pnniNodeActiveParentNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Node Identifier value being used by the Peer Group
Leader to represent this peer group at the next higher
level of the hierarchy. If this node is at the highest
level of the hierarchy or if no PGL has yet been elected
the PNNI Protocol Entity sets the value of this attribute
to (all) zero(s)."
::= { pnniNodePglEntry 10 }
-- initial timer values table
pnniNodeTimerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniNodeTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of initial PNNI timer values and significant
change thresholds."
::= { pnniMIBObjects 4 }
pnniNodeTimerEntry OBJECT-TYPE
SYNTAX PnniNodeTimerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing initial PNNI timer values
and significant change thresholds of a PNNI logical node in
this switching system."
AUGMENTS { pnniNodeEntry }
::= { pnniNodeTimerTable 1 }
PnniNodeTimerEntry ::=
SEQUENCE {
pnniNodePtseHolddown Integer32,
pnniNodeHelloHolddown Integer32,
pnniNodeHelloInterval Integer32,
pnniNodeHelloInactivityFactor Integer32,
pnniNodeHlinkInact Integer32,
pnniNodePtseRefreshInterval Integer32,
pnniNodePtseLifetimeFactor INTEGER,
pnniNodeRxmtInterval Integer32,
pnniNodePeerDelayedAckInterval Integer32,
pnniNodeAvcrPm INTEGER,
pnniNodeAvcrMt INTEGER,
pnniNodeCdvPm INTEGER,
pnniNodeCtdPm INTEGER
}
pnniNodePtseHolddown OBJECT-TYPE
SYNTAX Integer32
UNITS "100 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The initial value for the PTSE hold down timer that will be
used by the given node to limit the rate at which it can
re-originate PTSEs. It must be a positive non-zero number."
REFERENCE
"ATM Forum PNNI 1.0 Annex G MinPTSEInterval"
DEFVAL { 10 }
::= { pnniNodeTimerEntry 1 }
pnniNodeHelloHolddown OBJECT-TYPE
SYNTAX Integer32
UNITS "100 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The initial value for the Hello hold down timer that will
be used by the given node to limit the rate at which it
sends Hellos. It must be a positive non-zero number."
REFERENCE
"ATM Forum PNNI 1.0 Annex G MinHelloInterval"
DEFVAL { 10 }
::= { pnniNodeTimerEntry 2 }
pnniNodeHelloInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The initial value for the Hello Timer.
In the absence of triggered Hellos, this node will send one
Hello packet on each of its ports on this interval."
REFERENCE
"ATM Forum PNNI 1.0 Annex G HelloInterval"
DEFVAL { 15 }
::= { pnniNodeTimerEntry 3 }
pnniNodeHelloInactivityFactor OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value for the Hello Inactivity factor that this
node will use to determine when a neighbor has gone down."
REFERENCE
"ATM Forum PNNI 1.0 Annex G InactivityFactor"
DEFVAL { 5 }
::= { pnniNodeTimerEntry 4 }
pnniNodeHlinkInact OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time a node will continue to
advertise a horizontal (logical) link for which it has
not received and processed a LGN Horizontal Link
information group."
REFERENCE
"ATM Forum PNNI 1.0 Annex G HorizontalLinkInactivityTime"
DEFVAL { 120 }
::= { pnniNodeTimerEntry 5 }
pnniNodePtseRefreshInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The initial value for the Refresh timer that this node will
use to drive (re-)origination of PTSEs in the absence of
triggered updates."
REFERENCE
"ATM Forum PNNI 1.0 Annex G PTSERefreshInterval"
DEFVAL { 1800 }
::= { pnniNodeTimerEntry 6 }
pnniNodePtseLifetimeFactor OBJECT-TYPE
SYNTAX INTEGER (101..1000)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value for the lifetime multiplier, expressed as a
percentage. The result of multiplying the
pnniNodePtseRefreshInterval attribute value by this
attribute value is used as the initial lifetime that this
node places into self-originated PTSEs."
REFERENCE
"ATM Forum PNNI 1.0 Annex G PTSELifetimeFactor"
DEFVAL { 200 }
::= { pnniNodeTimerEntry 7 }
pnniNodeRxmtInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The period between retransmissions of unacknowledged
Database Summary packets, PTSE Request packets, and PTSPs."
REFERENCE
"ATM Forum PNNI 1.0 Annex G DSRxmtInterval,
RequestRxmtInterval, PTSERetransmissionInterval"
DEFVAL { 5 }
::= { pnniNodeTimerEntry 8 }
pnniNodePeerDelayedAckInterval OBJECT-TYPE
SYNTAX Integer32
UNITS "100 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum amount of time between transmissions of
delayed PTSE acknowledgement packets."
REFERENCE
"ATM Forum PNNI 1.0 Annex G PeerDelayedAckInterval,
Appendix G"
DEFVAL { 10 }
::= { pnniNodeTimerEntry 9 }
pnniNodeAvcrPm OBJECT-TYPE
SYNTAX INTEGER (1..99)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The proportional multiplier used in the algorithms that
determine significant change for AvCR parameters, expressed
as a percentage."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.5.2.5.4, Annex G AvCR_PM"
DEFVAL { 50 }
::= { pnniNodeTimerEntry 10 }
pnniNodeAvcrMt OBJECT-TYPE
SYNTAX INTEGER (1..99)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum threshold used in the algorithms that determine
significant change for AvCR parameters, expressed as a
percentage."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.5.2.5.4, Annex G AvCR_mT"
DEFVAL { 3 }
::= { pnniNodeTimerEntry 11 }
pnniNodeCdvPm OBJECT-TYPE
SYNTAX INTEGER (1..99)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The proportional multiplier used in the algorithms that
determine significant change for CDV metrics, expressed as
a percentage."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.5.2.5.6, Annex G CDV_PM"
DEFVAL { 25 }
::= { pnniNodeTimerEntry 12 }
pnniNodeCtdPm OBJECT-TYPE
SYNTAX INTEGER (1..99)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The proportional multiplier used in the algorithms that
determine significant change for CTD metrics, expressed as
a percentage."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.5.2.5.5, Annex G maxCTD_PM"
DEFVAL { 50 }
::= { pnniNodeTimerEntry 13 }
-- nodal SVCC-based RCC variables table
pnniNodeSvccTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniNodeSvccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of variables related to SVCC-based routing control
channels."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.5"
::= { pnniMIBObjects 5 }
pnniNodeSvccEntry OBJECT-TYPE
SYNTAX PnniNodeSvccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing SVCC-based RCC variables
of a PNNI logical node in this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.5"
AUGMENTS { pnniNodeEntry }
::= { pnniNodeSvccTable 1 }
PnniNodeSvccEntry ::=
SEQUENCE {
pnniNodeSvccInitTime Integer32,
pnniNodeSvccRetryTime Integer32,
pnniNodeSvccCallingIntegrityTime Integer32,
pnniNodeSvccCalledIntegrityTime Integer32,
pnniNodeSvccTrafficDescriptorIndex AtmTrafficDescrParamIndex
}
pnniNodeSvccInitTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time this node will delay initiating
establishment of an SVCC to a neighbor with a numerically
lower ATM address, after determining that such an SVCC
should be established."
REFERENCE
"ATM Forum PNNI 1.0 Annex G InitialLGNSVCTimeout"
DEFVAL { 4 }
::= { pnniNodeSvccEntry 1 }
pnniNodeSvccRetryTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time this node will delay after an apparently
still necessary and viable SVCC-based RCC is unexpectedly
torn down, before attempting to re-establish it."
REFERENCE
"ATM Forum PNNI 1.0 Annex G RetryLGNSVCTimeout"
DEFVAL { 30 }
::= { pnniNodeSvccEntry 2 }
pnniNodeSvccCallingIntegrityTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time this node will wait for an SVCC, which
it has initiated establishment of as the calling party, to
become fully established before giving up and tearing it
down."
REFERENCE
"ATM Forum PNNI 1.0 Annex G SVCCallingIntegrityTime"
DEFVAL { 35 }
::= { pnniNodeSvccEntry 3 }
pnniNodeSvccCalledIntegrityTime OBJECT-TYPE
SYNTAX Integer32
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The amount of time this node will wait for an SVCC, which
it has decided to accept as the called party, to become
fully established before giving up and tearing it down."
REFERENCE
"ATM Forum PNNI 1.0 Annex G SVCCalledIntegrityTime"
DEFVAL { 50 }
::= { pnniNodeSvccEntry 4 }
pnniNodeSvccTrafficDescriptorIndex OBJECT-TYPE
SYNTAX AtmTrafficDescrParamIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An index into the atmTrafficDescrParamTable defined in
RFC 1695. This traffic descriptor is used when
establishing switched virtual channels for use as
SVCC-based RCCs to/from PNNI logical group nodes."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.5.2, Annex G
RCCMaximumBurstSize, RCCPeakCellRate,
RCCSustainableCellRate"
::= { pnniNodeSvccEntry 5 }
-- scope mapping table
pnniScopeMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniScopeMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pnniScopeTable contains the mappings of membership and
connection scope from organizational scope values (used at
UNI interfaces) to PNNI scope (i.e. in terms of PNNI
routing level indicators)."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.6"
::= { pnniMIBObjects 6 }
pnniScopeMappingEntry OBJECT-TYPE
SYNTAX PnniScopeMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing scope mapping information
for a PNNI logical node in this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.6"
AUGMENTS { pnniNodeEntry }
::= { pnniScopeMappingTable 1 }
PnniScopeMappingEntry ::=
SEQUENCE {
pnniScopeLocalNetwork PnniLevel,
pnniScopeLocalNetworkPlusOne PnniLevel,
pnniScopeLocalNetworkPlusTwo PnniLevel,
pnniScopeSiteMinusOne PnniLevel,
pnniScopeIntraSite PnniLevel,
pnniScopeSitePlusOne PnniLevel,
pnniScopeOrganizationMinusOne PnniLevel,
pnniScopeIntraOrganization PnniLevel,
pnniScopeOrganizationPlusOne PnniLevel,
pnniScopeCommunityMinusOne PnniLevel,
pnniScopeIntraCommunity PnniLevel,
pnniScopeCommunityPlusOne PnniLevel,
pnniScopeRegional PnniLevel,
pnniScopeInterRegional PnniLevel,
pnniScopeGlobal PnniLevel
}
pnniScopeLocalNetwork OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value localNetwork(1)."
DEFVAL { 96 }
::= { pnniScopeMappingEntry 1 }
pnniScopeLocalNetworkPlusOne OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value localNetworkPlusOne(2)."
DEFVAL { 96 }
::= { pnniScopeMappingEntry 2 }
pnniScopeLocalNetworkPlusTwo OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value localNetworkPlusTwo(3)."
DEFVAL { 96 }
::= { pnniScopeMappingEntry 3 }
pnniScopeSiteMinusOne OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value siteMinusOne(4)."
DEFVAL { 80 }
::= { pnniScopeMappingEntry 4 }
pnniScopeIntraSite OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value intraSite(5)."
DEFVAL { 80 }
::= { pnniScopeMappingEntry 5 }
pnniScopeSitePlusOne OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value sitePlusOne(6)."
DEFVAL { 72 }
::= { pnniScopeMappingEntry 6 }
pnniScopeOrganizationMinusOne OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value organizationMinusOne(7)."
DEFVAL { 72 }
::= { pnniScopeMappingEntry 7 }
pnniScopeIntraOrganization OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value intraOrganization(8)."
DEFVAL { 64 }
::= { pnniScopeMappingEntry 8 }
pnniScopeOrganizationPlusOne OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value organizationPlusOne(9)."
DEFVAL { 64 }
::= { pnniScopeMappingEntry 9 }
pnniScopeCommunityMinusOne OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value communityMinusOne(10)."
DEFVAL { 64 }
::= { pnniScopeMappingEntry 10 }
pnniScopeIntraCommunity OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value intraCommunity(11)."
DEFVAL { 48 }
::= { pnniScopeMappingEntry 11 }
pnniScopeCommunityPlusOne OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value communityPlusOne(12)."
DEFVAL { 48 }
::= { pnniScopeMappingEntry 12 }
pnniScopeRegional OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value regional(13)."
DEFVAL { 32 }
::= { pnniScopeMappingEntry 13 }
pnniScopeInterRegional OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value interRegional(14)."
DEFVAL { 32 }
::= { pnniScopeMappingEntry 14 }
pnniScopeGlobal OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The highest level of PNNI hierarchy (i.e. smallest PNNI
routing level) that lies within the organizational scope
value global(15)."
DEFVAL { 0 }
::= { pnniScopeMappingEntry 15 }
-- Deprecated summary advertising table
pnniSummaryTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniSummaryEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"A list of the summary address prefixes that may be
advertised by the specified logical PNNI entity."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.9.2"
::= { pnniMIBObjects 7 }
pnniSummaryEntry OBJECT-TYPE
SYNTAX PnniSummaryEntry
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"An entry in the table, containing summary address prefix
information in this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.9.2"
INDEX { pnniNodeIndex,
pnniSummaryAddress,
pnniSummaryPrefixLength }
::= { pnniSummaryTable 1 }
PnniSummaryEntry ::=
SEQUENCE {
pnniSummaryAddress AtmAddrPrefix,
pnniSummaryPrefixLength PnniPrefixLength,
pnniSummaryType INTEGER,
pnniSummarySuppress TruthValue,
pnniSummaryState INTEGER,
pnniSummaryRowStatus RowStatus
}
pnniSummaryAddress OBJECT-TYPE
SYNTAX AtmAddrPrefix
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The ATM End System Address prefix for the summary."
::= { pnniSummaryEntry 1 }
pnniSummaryPrefixLength OBJECT-TYPE
SYNTAX PnniPrefixLength
MAX-ACCESS not-accessible
STATUS deprecated
DESCRIPTION
"The prefix length for the summary."
::= { pnniSummaryEntry 2 }
pnniSummaryType OBJECT-TYPE
SYNTAX INTEGER { internal(1), exterior(2) }
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"The type (e.g. internal or exterior) of summary being
described."
DEFVAL { internal }
::= { pnniSummaryEntry 3 }
pnniSummarySuppress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"Determines what is done with addresses that are being
summarized by the instance. The default value (e.g. false)
will indicate that the summary should propagate into the
peer group. Network Management will be able to set the
value of this attribute to `suppress' (e.g. true), which
suppresses the summary and any reachable addresses it
summarizes from being advertised into the peer group."
DEFVAL { false }
::= { pnniSummaryEntry 4 }
pnniSummaryState OBJECT-TYPE
SYNTAX INTEGER {
advertising(1),
suppressing(2),
inactive(3)
}
MAX-ACCESS read-only
STATUS deprecated
DESCRIPTION
"Indicates whether the summary is currently being advertised
by the node within the local switching system into its peer
group."
::= { pnniSummaryEntry 5 }
pnniSummaryRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS deprecated
DESCRIPTION
"To create, delete, activate and de-activate a summary."
::= { pnniSummaryEntry 6 }
-- Summary address table
pnniSummaryAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniSummaryAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of the summary address prefixes that may be
advertised by the specified logical PNNI entity."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.9.2"
::= { pnniMIBObjects 20 }
pnniSummaryAddressEntry OBJECT-TYPE
SYNTAX PnniSummaryAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing summary address prefix
information in this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.9.2"
INDEX { pnniNodeIndex,
pnniSummaryAddressType,
pnniSummaryAddressAddress,
pnniSummaryAddressPrefixLength }
::= { pnniSummaryAddressTable 1 }
PnniSummaryAddressEntry ::=
SEQUENCE {
pnniSummaryAddressType INTEGER,
pnniSummaryAddressAddress AtmAddrPrefix,
pnniSummaryAddressPrefixLength PnniPrefixLength,
pnniSummaryAddressSuppress TruthValue,
pnniSummaryAddressState INTEGER,
pnniSummaryAddressRowStatus RowStatus
}
pnniSummaryAddressType OBJECT-TYPE
SYNTAX INTEGER { internal(1), exterior(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type (e.g. internal or exterior) of summary being
described."
::= { pnniSummaryAddressEntry 1 }
pnniSummaryAddressAddress OBJECT-TYPE
SYNTAX AtmAddrPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ATM End System Address prefix for the summary."
::= { pnniSummaryAddressEntry 2 }
pnniSummaryAddressPrefixLength OBJECT-TYPE
SYNTAX PnniPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix length for the summary."
::= { pnniSummaryAddressEntry 3 }
pnniSummaryAddressSuppress OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Determines what is done with addresses that are being
summarized by the instance. The default value (e.g. false)
will indicate that the summary should propagate into the
peer group. Network Management will be able to set the
value of this attribute to `suppress' (e.g. true), which
suppresses the summary and any reachable addresses it
summarizes from being advertised into the peer group."
DEFVAL { false }
::= { pnniSummaryAddressEntry 4 }
pnniSummaryAddressState OBJECT-TYPE
SYNTAX INTEGER {
advertising(1),
suppressing(2),
inactive(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the summary is currently being advertised
by the node within the local switching system into its peer
group."
::= { pnniSummaryAddressEntry 5 }
pnniSummaryAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, activate and de-activate a summary."
::= { pnniSummaryAddressEntry 6 }
-- Interface table
pnniIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pnniIfTable contains the attributes necessary to
configure a physical interface on a switching system which
is capable of being used for PNNI routing. Interfaces may
represent physical connection points (i.e. copper/fiber
connection points) or VPCs which have been configured for
PNNI's use. Each interface is attached to a specific
lowest-level node within the switching system.
An ifIndex is used as the instance ID to uniquely identify
the interface on the local switching system. This index has
the same value as the ifIndex object defined in RFC 1573
for the same interface, since this table correlates with
the ifTable in RFC 1573.
One row in this table is created by the managed system for
each row in the ifTable that has an ifType of atm(37) or
atmLogical(80)."
::= { pnniMIBObjects 8 }
pnniIfEntry OBJECT-TYPE
SYNTAX PnniIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing PNNI specific interface
information in this switching system."
INDEX { ifIndex }
::= { pnniIfTable 1 }
PnniIfEntry ::=
SEQUENCE {
pnniIfNodeIndex PnniNodeIndex,
pnniIfPortId PnniPortId,
pnniIfAggrToken PnniAggrToken,
pnniIfVPCapability TruthValue,
pnniIfAdmWeightCbr Unsigned32,
pnniIfAdmWeightRtVbr Unsigned32,
pnniIfAdmWeightNrtVbr Unsigned32,
pnniIfAdmWeightAbr Unsigned32,
pnniIfAdmWeightUbr Unsigned32,
pnniIfRccServiceCategory ServiceCategory,
pnniIfRccTrafficDescrIndex AtmTrafficDescrParamIndex
}
pnniIfNodeIndex OBJECT-TYPE
SYNTAX PnniNodeIndex (1..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Identifies the node within the switching system that the
interface is directly attached to. The value zero is not
a valid value."
DEFVAL { 1 }
::= { pnniIfEntry 1 }
pnniIfPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Port Identifier of the port as selected by the PNNI
protocol entity for the given interface. This value has
meaning only within the context of the node to which the
port is attached. The distinguished value zero indicates
that no PNNI Port Identifier has been assigned for this
interface (for example, this value may be used when the
interface is not running PNNI)."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.4"
::= { pnniIfEntry 2 }
pnniIfAggrToken OBJECT-TYPE
SYNTAX PnniAggrToken
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured aggregation token for this interface. The
aggregation token controls what other links the link
associated with this interface will be aggregated together
with."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.3.5, 5.10.3.1"
DEFVAL { 0 }
::= { pnniIfEntry 3 }
pnniIfVPCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates whether the interface is capable of having VPCs
established within it or not.
This object may only have the value `true' for physical ATM
interfaces, i.e. those with an ifType of atm(37)."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.14.9.1 Table 5-34"
::= { pnniIfEntry 4 }
pnniIfAdmWeightCbr OBJECT-TYPE
SYNTAX Unsigned32 (1..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative weight of this interface for the
constant bit rate service category."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 5040 }
::= { pnniIfEntry 5 }
pnniIfAdmWeightRtVbr OBJECT-TYPE
SYNTAX Unsigned32 (1..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative weight of this interface for the
real-time variable bit rate service category."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 5040 }
::= { pnniIfEntry 6 }
pnniIfAdmWeightNrtVbr OBJECT-TYPE
SYNTAX Unsigned32 (1..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative weight of this interface for the
non-real-time variable bit rate service category."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 5040 }
::= { pnniIfEntry 7 }
pnniIfAdmWeightAbr OBJECT-TYPE
SYNTAX Unsigned32 (1..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative weight of this interface for the
available bit rate service category."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 5040 }
::= { pnniIfEntry 8 }
pnniIfAdmWeightUbr OBJECT-TYPE
SYNTAX Unsigned32 (1..16777215)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administrative weight of this interface for the
unspecified bit rate service category."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 5040 }
::= { pnniIfEntry 9 }
pnniIfRccServiceCategory OBJECT-TYPE
SYNTAX ServiceCategory
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The service category used for the PNNI routing control
channel (VCI=18) on this interface."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.5.2, 5.5.3"
::= { pnniIfEntry 10 }
pnniIfRccTrafficDescrIndex OBJECT-TYPE
SYNTAX AtmTrafficDescrParamIndex
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The traffic descriptor index referring to the entry in the
atmTrafficDescrParamTable defined in RFC 1695 that
specifies the traffic allocation for the PNNI routing
control channel (VCI=18) on this interface."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.5.2, 5.5.3, Annex G
RCCMaximumBurstSize, RCCPeakCellRate,
RCCSustainableCellRate"
::= { pnniIfEntry 11 }
-- link table
pnniLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the attributes necessary to describe
the operation of logical links attached to the local
switching system and the relationship with the neighbor
nodes on the other end of the links. Links are attached to
a specific node within the switching system. A
concatenation of the Node Index of the node within the
local switching system and the port ID are used as the
instance ID to uniquely identify the link. Links may
represent horizontal links between lowest level neighboring
peers, outside links, uplinks, or horizontal links to/from
LGNs.
The entire pnniLink object is read-only, reflecting the
fact that this information is discovered dynamically by the
PNNI protocol rather than configured."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.6"
::= { pnniMIBObjects 9 }
pnniLinkEntry OBJECT-TYPE
SYNTAX PnniLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a link
attached to a PNNI logical node in this switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.6"
INDEX { pnniNodeIndex,
pnniLinkPortId }
::= { pnniLinkTable 1 }
PnniLinkEntry ::=
SEQUENCE {
pnniLinkPortId PnniPortId,
pnniLinkType INTEGER,
pnniLinkVersion PnniVersion,
pnniLinkHelloState PnniHelloState,
pnniLinkRemoteNodeId PnniNodeId,
pnniLinkRemotePortId PnniPortId,
pnniLinkDerivedAggrToken PnniAggrToken,
pnniLinkUpnodeId PnniNodeId,
pnniLinkUpnodeAtmAddress PnniAtmAddr,
pnniLinkCommonPeerGroupId PnniPeerGroupId,
pnniLinkIfIndex InterfaceIndex,
pnniLinkSvccRccIndex PnniSvccRccIndex,
pnniLinkRcvHellos Counter32,
pnniLinkXmtHellos Counter32
}
pnniLinkPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Port Identifier of the link as selected by the local
node. This value has meaning only within the context of
the node to which the port is attached."
::= { pnniLinkEntry 1 }
pnniLinkType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
lowestLevelHorizontalLink(2),
horizontalLinkToFromLgn(3),
lowestLevelOutsideLink(4),
uplink(5),
outsideLinkAndUplink(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the type of link being described."
::= { pnniLinkEntry 2 }
pnniLinkVersion OBJECT-TYPE
SYNTAX PnniVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal and outside links between lowest-level nodes
and for links of unknown type, this attribute indicates the
version of PNNI routing protocol used to exchange
information over this link. If communication with the
neighbor node has not yet been established, then the
Version is set to `unknown'. For uplinks (where the
port ID is not also used for the underlying outside link)
or links to/from LGNs, the Version is set to `unknown'."
::= { pnniLinkEntry 3 }
pnniLinkHelloState OBJECT-TYPE
SYNTAX PnniHelloState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal and outside links between lowest-level nodes
and for links of unknown type, this attribute indicates the
state of the Hello protocol exchange over this link. For
links to/from LGNs, this attribute indicates the state of
the corresponding LGN Horizontal Link Hello State Machine.
For uplinks (where the port ID is not also used for the
underlying outside link), this attribute is set to
notApplicable."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.6.2.1.2"
::= { pnniLinkEntry 4 }
pnniLinkRemoteNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the node identifier of the remote (neighboring)
node on the other end of the link. If the pnniLinkType is
`outside link and uplink', this is the node identifier of
the lowest-level neighbor node on the other end of the
outside link. If the remote node ID is unknown or if the
pnniLinkType is `uplink', this attribute is set to all
zeros."
::= { pnniLinkEntry 5 }
pnniLinkRemotePortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the port identifier of the port at the remote end
of the link as assigned by the remote node. If the
pnniLinkType is `outside link and uplink', this is the port
identifier assigned by the lowest-level neighbor node to
identify the outside link. If the remote port ID is
unknown or if the pnniLinkType is `uplink', this attribute
is set to zero."
::= { pnniLinkEntry 6 }
pnniLinkDerivedAggrToken OBJECT-TYPE
SYNTAX PnniAggrToken
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the derived aggregation token value used on this
link. For horizontal links between lowest-level nodes and
when the link type is not yet known, this attribute takes
the value of zero."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.10.3.1"
::= { pnniLinkEntry 7 }
pnniLinkUpnodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For outside links and uplinks, this attribute contains the
Node Identifier of the upnode (the neighbor node's identity
at the level of the common peer group). When the upnode
has not yet been identified, this attribute is set to zero.
For horizontal links or when the link type is not yet
known, this attribute is set to zero."
::= { pnniLinkEntry 8 }
pnniLinkUpnodeAtmAddress OBJECT-TYPE
SYNTAX PnniAtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For outside links and uplinks, this attribute contains the
ATM End System Address used to establish connections to the
upnode. When the upnode has not yet been identified, this
attribute is set to zero. For horizontal links or when the
link type is not yet known, this attribute is set to zero."
::= { pnniLinkEntry 9 }
pnniLinkCommonPeerGroupId OBJECT-TYPE
SYNTAX PnniPeerGroupId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For outside links and uplinks, this attribute contains the
peer group identifier of the lowest level common Peer Group
in the ancestry of the neighboring node and the node within
the local switching system. The value of this attribute
takes on a value determined by the Hello exchange of
hierarchical information that occurs between the two
lowest-level border nodes. When the common peer group has
not yet been identified, this attribute is set to zero.
For horizontal links or when the link type is not yet
known, this attribute is set to all zeros."
::= { pnniLinkEntry 10 }
pnniLinkIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal and outside links between lowest-level nodes
and for links of unknown type, this attribute identifies
the interface to which the logical link corresponds.
For all other cases, the value of this object is zero."
::= { pnniLinkEntry 11 }
pnniLinkSvccRccIndex OBJECT-TYPE
SYNTAX PnniSvccRccIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal links to/from LGNs, this attribute
identifies the SVCC-based RCC used to exchange information
with the neighboring peer logical group node. If the
pnniLinkType is not `horizontal link to/from LGN', this
attribute shall take the value of zero."
::= { pnniLinkEntry 12 }
pnniLinkRcvHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal and outside links between lowest-level nodes
and for links of unknown type, this attribute contains a
count of the number of Hello Packets received over this
link. If the pnniLinkType is `horizontal link to/from LGN'
or `uplink', this attribute is set to zero."
::= { pnniLinkEntry 13 }
pnniLinkXmtHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal and outside links between lowest-level nodes
and for links of unknown type, this attribute contains a
count of the number of Hello Packets transmitted over this
link. If the pnniLinkType is `horizontal link to/from LGN'
or `uplink', this attribute is set to zero."
::= { pnniLinkEntry 14 }
-- neighboring peer table
pnniNbrPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniNbrPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pnniNbrPeer Object contains all the attributes
necessary to describe the relationship a node in this
switching system has with a neighboring node within the
same peer group. A concatenation of the Node Identifier of
the node within the local switching system and the
neighboring peer's Node Identifier is used to form the
instance ID for this object.
The entire pnniNbrPeer object is read-only, reflecting the
fact that neighboring peers are discovered dynamically by
the PNNI protocol rather than configured."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.7, 5.8"
::= { pnniMIBObjects 10 }
pnniNbrPeerEntry OBJECT-TYPE
SYNTAX PnniNbrPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about this
node's relationship with a neighboring peer node."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.7, 5.8"
INDEX { pnniNodeIndex,
pnniNbrPeerRemoteNodeId }
::= { pnniNbrPeerTable 1 }
PnniNbrPeerEntry ::=
SEQUENCE {
pnniNbrPeerRemoteNodeId PnniNodeId,
pnniNbrPeerState INTEGER,
pnniNbrPeerSvccRccIndex PnniSvccRccIndex,
pnniNbrPeerPortCount Gauge32,
pnniNbrPeerRcvDbSums Counter32,
pnniNbrPeerXmtDbSums Counter32,
pnniNbrPeerRcvPtsps Counter32,
pnniNbrPeerXmtPtsps Counter32,
pnniNbrPeerRcvPtseReqs Counter32,
pnniNbrPeerXmtPtseReqs Counter32,
pnniNbrPeerRcvPtseAcks Counter32,
pnniNbrPeerXmtPtseAcks Counter32
}
pnniNbrPeerRemoteNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Node Identifier of the neighboring peer node."
::= { pnniNbrPeerEntry 1 }
pnniNbrPeerState OBJECT-TYPE
SYNTAX INTEGER {
npdown(1),
negotiating(2),
exchanging(3),
loading(4),
full(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the state of this node's Neighboring Peer State
Machine associated with pnniNbrPeerRemoteNodeId."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.7.2"
::= { pnniNbrPeerEntry 2 }
pnniNbrPeerSvccRccIndex OBJECT-TYPE
SYNTAX PnniSvccRccIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the SVCC-based RCC being used to communicate
with the neighboring peer if one exists. If both the local
node and the neighboring peer node are lowest-level nodes,
this attribute is set to zero."
::= { pnniNbrPeerEntry 3 }
pnniNbrPeerPortCount OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the total number of ports that connect to the
neighboring peer. If the neighboring peer only
communicates via an SVCC-based RCC, the value of this
attribute is set to zero. Otherwise it is set to the total
number of ports to the neighboring peer in the Hello state
2-WayInside."
::= { pnniNbrPeerEntry 4 }
pnniNbrPeerRcvDbSums OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Database Summary Packets received
from the neighboring peer."
::= { pnniNbrPeerEntry 5 }
pnniNbrPeerXmtDbSums OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Database Summary Packets
transmitted to the neighboring peer."
::= { pnniNbrPeerEntry 6 }
pnniNbrPeerRcvPtsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of PTSPs received from the
neighboring peer."
::= { pnniNbrPeerEntry 7 }
pnniNbrPeerXmtPtsps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of PTSPs (re)transmitted to the
neighboring peer."
::= { pnniNbrPeerEntry 8 }
pnniNbrPeerRcvPtseReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of PTSE Request packets received from
the neighboring peer."
::= { pnniNbrPeerEntry 9 }
pnniNbrPeerXmtPtseReqs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of PTSE Request packets transmitted
to the neighboring peer."
::= { pnniNbrPeerEntry 10 }
pnniNbrPeerRcvPtseAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of PTSE Ack packets received from the
neighboring peer."
::= { pnniNbrPeerEntry 11 }
pnniNbrPeerXmtPtseAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of PTSE Ack packets transmitted to
the neighboring peer."
::= { pnniNbrPeerEntry 12 }
-- neighboring peer port table
pnniNbrPeerPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniNbrPeerPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of all ports in Hello state 2-Way Inside to a given
neighboring peer node. A concatenation of the Node Index
of the node within the local switching system, the
neighbor's Node Identifier and the Interface Index of the
port being described forms the instance ID for this object.
This object is only used for lowest-level nodes."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.7.1 Port ID List"
::= { pnniMIBObjects 11 }
pnniNbrPeerPortEntry OBJECT-TYPE
SYNTAX PnniNbrPeerPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a port
in the Hello state 2-Way Inside from a PNNI logical node in
this switching system to a neighboring peer node."
INDEX { pnniNodeIndex,
pnniNbrPeerRemoteNodeId,
pnniNbrPeerPortId
}
::= { pnniNbrPeerPortTable 1 }
PnniNbrPeerPortEntry ::=
SEQUENCE {
pnniNbrPeerPortId PnniPortId,
pnniNbrPeerPortFloodStatus TruthValue
}
pnniNbrPeerPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port ID of a port to the neighboring peer that is in
the Hello state 2-Way Inside."
::= { pnniNbrPeerPortEntry 1 }
pnniNbrPeerPortFloodStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the port is being used for transmission
of flooding and database synchronization information to the
neighboring peer."
::= { pnniNbrPeerPortEntry 2 }
-- pnni SVCC-based routing control channel table
pnniSvccRccTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniSvccRccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing the attributes necessary to analyze the
operation of the PNNI protocol on SVCC-based Routing
Control Channels. This entire object is read-only,
reflecting the fact that SVCC-based RCCs are established
dynamically during operation of the PNNI protocol rather
than configured."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.5.6, 5.6.3.1"
::= { pnniMIBObjects 12 }
pnniSvccRccEntry OBJECT-TYPE
SYNTAX PnniSvccRccEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about an
SVCC-based RCC from a PNNI logical node in this switching
system."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.5.6, 5.6.3.1"
INDEX { pnniNodeIndex,
pnniSvccRccIndex }
::= { pnniSvccRccTable 1 }
PnniSvccRccEntry ::=
SEQUENCE {
pnniSvccRccIndex PnniSvccRccIndex,
pnniSvccRccVersion PnniVersion,
pnniSvccRccHelloState PnniHelloState,
pnniSvccRccRemoteNodeId PnniNodeId,
pnniSvccRccRemoteAtmAddress PnniAtmAddr,
pnniSvccRccRcvHellos Counter32,
pnniSvccRccXmtHellos Counter32,
pnniSvccRccIfIndex InterfaceIndex,
pnniSvccRccVpi INTEGER,
pnniSvccRccVci INTEGER
}
pnniSvccRccIndex OBJECT-TYPE
SYNTAX PnniSvccRccIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index into the node's tables of SVCC-based RCCs."
::= { pnniSvccRccEntry 1 }
pnniSvccRccVersion OBJECT-TYPE
SYNTAX PnniVersion
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The version of the PNNI routing protocol used to exchange
information with the neighbor node."
::= { pnniSvccRccEntry 2 }
pnniSvccRccHelloState OBJECT-TYPE
SYNTAX PnniHelloState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the Hello protocol exchange over the
SVCC-based RCC.
Note: the Down state indicates that the SVCC
establishment is in progress."
::= { pnniSvccRccEntry 3 }
pnniSvccRccRemoteNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote node at which the SVCC-based RCC terminates."
::= { pnniSvccRccEntry 4 }
pnniSvccRccRemoteAtmAddress OBJECT-TYPE
SYNTAX PnniAtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM End System Address to which SVCC establishment is
attempted."
::= { pnniSvccRccEntry 5 }
pnniSvccRccRcvHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Hello Packets received over this
SVCC-based RCC."
::= { pnniSvccRccEntry 6 }
pnniSvccRccXmtHellos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A count of the number of Hello Packets transmitted over
this SVCC-based RCC."
::= { pnniSvccRccEntry 7 }
pnniSvccRccIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface from which the SVCC-based RCC leaves the
switching system. If the SVCC-based RCC has not yet been
established, then this attribute takes the value of zero."
::= { pnniSvccRccEntry 8 }
pnniSvccRccVpi OBJECT-TYPE
SYNTAX INTEGER (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPI used at the interface from which the SVCC-based RCC
leaves the switching system. If the SVCC-based RCC has not
yet been established, then this attribute takes the value
of zero "
::= { pnniSvccRccEntry 9 }
pnniSvccRccVci OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VCI used at the interface from which the SVCC-based RCC
leaves the switching system. If the SVCC-based RCC has not
yet been established, then this attribute takes the value
of zero "
::= { pnniSvccRccEntry 10 }
-- PTSE table
pnniPtseTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniPtseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pnniPtse object contains the attributes that describe
the most recent instances of PTSEs in a node's topology
database. A concatenation of the Node Identifier of the
local node that received the PTSE, the originating Node's
Node Identifier and the PTSE Identifier are used to form
the instance ID for an instance of this object."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.2"
::= { pnniMIBObjects 13 }
pnniPtseEntry OBJECT-TYPE
SYNTAX PnniPtseEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a PTSE
in the topology database of a PNNI logical node in this
switching system."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.2"
INDEX { pnniNodeIndex,
pnniPtseOriginatingNodeId,
pnniPtseId }
::= { pnniPtseTable 1 }
PnniPtseEntry ::=
SEQUENCE {
pnniPtseOriginatingNodeId PnniNodeId,
pnniPtseId Unsigned32,
pnniPtseType INTEGER,
pnniPtseSequenceNum Unsigned32,
pnniPtseChecksum Unsigned32,
pnniPtseLifeTime Unsigned32,
pnniPtseInfo OCTET STRING
}
pnniPtseOriginatingNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Node Identifier of the node that originated the PTSE."
::= { pnniPtseEntry 1 }
pnniPtseId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the PTSE Identifier assigned to the PTSE by
its originator."
::= { pnniPtseEntry 2 }
pnniPtseType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
nodalStateParameters(96),
nodalInformation(97),
internalReachableAddresses(224),
exteriorReachableAddresses(256),
horizontalLinks(288),
uplinks(289)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of information contained in the PTSE."
::= { pnniPtseEntry 3 }
pnniPtseSequenceNum OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sequence number of the instance of the PTSE as it
appears in the local topology database."
::= { pnniPtseEntry 4 }
pnniPtseChecksum OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the PTSE checksum as it appears in the local
topology database."
::= { pnniPtseEntry 5 }
pnniPtseLifeTime OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the remaining lifetime for the given PTSE as
it appears in the local topology database."
::= { pnniPtseEntry 6 }
pnniPtseInfo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..65535))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An unformatted hexadecimal dump of the PTSE contents in
full.
Note: If the size of the PTSE contents is larger than the
maximum size of SNMP packets then this is truncated."
::= { pnniPtseEntry 7 }
-- pnni map table
pnniMapTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing attributes necessary to find and analyze
the operation of all links and nodes within the PNNI
hierarchy, as seen from the perspective of a local node.
An instance of a pnniMap Object describes a link in terms
of a node at one end of the link. Normally there will be
two instances of the pnniMap object in the MIB for each
horizontal link. The two instances provide information for
Network management to map port identifiers from the nodes
at both ends to the link between them. A concatenation of
the Local Node Index, Originating Node Identifier and
Originating Port Identifier are used to form the instance
ID for this object.
This entire object is read-only, reflecting the fact that
the map is discovered dynamically during operation of the
PNNI protocol rather than configured."
::= { pnniMIBObjects 14 }
pnniMapEntry OBJECT-TYPE
SYNTAX PnniMapEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing connectivity information
about a node or link in the PNNI routing domain, as seen
from the perspective of a PNNI logical node in this
switching system."
INDEX { pnniNodeIndex,
pnniMapOriginatingNodeId,
pnniMapOriginatingPortId,
pnniMapIndex }
::= { pnniMapTable 1 }
PnniMapEntry ::=
SEQUENCE {
pnniMapOriginatingNodeId PnniNodeId,
pnniMapOriginatingPortId PnniPortId,
pnniMapIndex INTEGER,
pnniMapType INTEGER,
pnniMapPeerGroupId PnniPeerGroupId,
pnniMapAggrToken PnniAggrToken,
pnniMapRemoteNodeId PnniNodeId,
pnniMapRemotePortId PnniPortId,
pnniMapVPCapability TruthValue,
pnniMapPtseId Unsigned32,
pnniMapMetricsTag PnniMetricsTag
}
pnniMapOriginatingNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The node identifier of the node whose connectivity within
itself or to other nodes is being described."
::= { pnniMapEntry 1 }
pnniMapOriginatingPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier of the port as assigned by the
originating node, to which the port is attached."
::= { pnniMapEntry 2 }
pnniMapIndex OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index into the set of link and nodal connectivity
associated with the originating node and port. This index
is needed since there may be multiple entries for nodal
connectivity from a specific node and port pair, in
addition to any entry for a horizontal link or uplink."
::= { pnniMapEntry 3 }
pnniMapType OBJECT-TYPE
SYNTAX INTEGER {
horizontalLink(1),
uplink(2),
node(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of PNNI entity being described by this entry in
the table."
::= { pnniMapEntry 4 }
pnniMapPeerGroupId OBJECT-TYPE
SYNTAX PnniPeerGroupId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the peer group of the originating node."
::= { pnniMapEntry 5 }
pnniMapAggrToken OBJECT-TYPE
SYNTAX PnniAggrToken
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal links to/from LGNs and for uplinks, this
attribute contains the derived aggregation token value for
this link. For nodes and for horizontal links between
lowest-level nodes, this attribute is set to zero."
::= { pnniMapEntry 6 }
pnniMapRemoteNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal links and uplinks, this attribute contains
the node identifier of the node at the other end of the
link from the originating node. If unknown, the PNNI
protocol entity sets this attribute's value to (all)
zero(s). For nodes, this attribute's value is set to (all)
zero(s)."
::= { pnniMapEntry 7 }
pnniMapRemotePortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For horizontal links and uplinks, this attribute contains
the port identifier of the port at the remote end of the
link as assigned by the remote node. If unknown, the PNNI
protocol entity sets this attribute's value to zero.
For nodes, this attribute contains the port identifier of
the port at the other end of the spoke or bypass from the
originating port. When the originating port ID is zero, a
value of zero indicates the default radius. When the
originating port ID is non-zero, a value of zero indicates
the nodal nucleus."
::= { pnniMapEntry 8 }
pnniMapVPCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether VPCs
can be established across the PNNI entity being described
by this entry in the pnniMapTable."
::= { pnniMapEntry 9 }
pnniMapPtseId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the PTSE Identifier for the PTSE being
originated by the originating node which contains the
information group(s) describing the PNNI entity."
::= { pnniMapEntry 10 }
pnniMapMetricsTag OBJECT-TYPE
SYNTAX PnniMetricsTag
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An arbitrary integer that is used to associate a set of
traffic parameters that are always advertised together.
Within this set, the parameters are distinguished by the
service categories and direction to which a set of
parameters apply. This value is used as an index into
the pnniMetricsTable. The distinguished value zero
indicates that no metrics are associated with the link or
nodal connectivity."
::= { pnniMapEntry 11 }
-- nodal map table
pnniMapNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniMapNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of nodes as seen from the perspective of a local
node. The pnniMapNodeTable contains all information
learned by the local node from nodal information PTSEs.
This entire object is read-only, reflecting the fact that
the map is discovered dynamically during operation of the
PNNI protocol rather than configured."
::= { pnniMIBObjects 15 }
pnniMapNodeEntry OBJECT-TYPE
SYNTAX PnniMapNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a node
in the PNNI routing domain, as seen from the perspective of
a logical node in this switching system."
INDEX { pnniNodeIndex,
pnniMapNodeId }
::= { pnniMapNodeTable 1 }
PnniMapNodeEntry ::=
SEQUENCE {
pnniMapNodeId PnniNodeId,
pnniMapNodePeerGroupId PnniPeerGroupId,
pnniMapNodeAtmAddress PnniAtmAddr,
pnniMapNodeRestrictedTransit TruthValue,
pnniMapNodeComplexRep TruthValue,
pnniMapNodeRestrictedBranching TruthValue,
pnniMapNodeDatabaseOverload TruthValue,
pnniMapNodeIAmLeader TruthValue,
pnniMapNodeLeadershipPriority INTEGER,
pnniMapNodePreferredPgl PnniNodeId,
pnniMapNodeParentNodeId PnniNodeId,
pnniMapNodeParentAtmAddress PnniAtmAddr,
pnniMapNodeParentPeerGroupId PnniPeerGroupId,
pnniMapNodeParentPglNodeId PnniNodeId
}
pnniMapNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Identifies the node whose nodal information is being
described."
::= { pnniMapNodeEntry 1 }
pnniMapNodePeerGroupId OBJECT-TYPE
SYNTAX PnniPeerGroupId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the peer group of the originating node."
::= { pnniMapNodeEntry 2 }
pnniMapNodeAtmAddress OBJECT-TYPE
SYNTAX PnniAtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM End System Address of the originating node."
::= { pnniMapNodeEntry 3 }
pnniMapNodeRestrictedTransit OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the originating node is restricted to
only allow support of SVCs originating or terminating at
this node. A value of `true' indicates that the transit
capabilities are restricted, i.e., transit connections are
not allowed, whereas a value of `false' indicates that
transit connections are allowed. This attribute reflects
the setting of the restricted transit bit received in the
nodal information PTSE of the originating node."
::= { pnniMapNodeEntry 4 }
pnniMapNodeComplexRep OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the originating node uses the complex
node representation. If the value is `true', the spokes
and bypasses that make up the complex node representation
should be found in the pnniMapTable. This attribute
reflects the setting of the nodal representation bit
received in the nodal information PTSE of the originating
node."
::= { pnniMapNodeEntry 5 }
pnniMapNodeRestrictedBranching OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the originating node is able to support
additional branches. If the value is 'false', then it can
support additional branches. This attribute reflects the
setting of the restricted branching bit received in the
nodal information PTSE of the originating node."
::= { pnniMapNodeEntry 6 }
pnniMapNodeDatabaseOverload OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the originating node is currently
operating in topology database overload state. This
attribute has the same value as the Non-transit for PGL
Election bit in the nodal information group originated by
this node."
::= { pnniMapNodeEntry 7 }
pnniMapNodeIAmLeader OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the originating node claims to be peer
group leader of its peer group. This attribute reflects
the setting of the 'I am Leader' bit received in the nodal
information PTSE of the originating node."
::= { pnniMapNodeEntry 8 }
pnniMapNodeLeadershipPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Leadership priority value advertised by the originating
node."
::= { pnniMapNodeEntry 9 }
pnniMapNodePreferredPgl OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies the node which the originating node believes
should be or is peer group leader of its peer group. If
the originating node has not chosen a Preferred PGL, this
attribute's value is set to (all) zero(s)."
::= { pnniMapNodeEntry 10 }
pnniMapNodeParentNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the originating node is a peer group leader, indicates
the node ID of the parent LGN. If the originating node is
not peer group leader of its peer group, this attribute's
value is set to (all) zero(s)."
::= { pnniMapNodeEntry 11 }
pnniMapNodeParentAtmAddress OBJECT-TYPE
SYNTAX PnniAtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the originating node is a peer group leader, indicates
the ATM address of the parent LGN. If the originating node
is not peer group leader of its peer group, this
attribute's value is set to (all) zero(s)."
::= { pnniMapNodeEntry 12 }
pnniMapNodeParentPeerGroupId OBJECT-TYPE
SYNTAX PnniPeerGroupId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the originating node is a peer group leader, indicates
the node's parent peer group ID. If the originating node
is not peer group leader of its peer group, this
attribute's value is set to (all) zero(s)."
::= { pnniMapNodeEntry 13 }
pnniMapNodeParentPglNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the originating node is a peer group leader,
identifies the node elected as peer group leader of the
parent peer group. If the originating node is not peer
group leader of its peer group, this attribute's value is
set to (all) zero(s)."
::= { pnniMapNodeEntry 14 }
-- address map table
pnniMapAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniMapAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The pnniMapAddr MIB Object contains a list of all reachable
addresses from each node visible to the local node. The
Local Node Index, Advertising Node ID, Advertised Port ID,
Reachable Address, and Address prefix length are combined
to form an instance ID for this object. The entire object
is read-only, reflecting the fact that reachable addresses
are discovered during dynamic operation of the PNNI
protocol rather than configured."
::= { pnniMIBObjects 16 }
pnniMapAddrEntry OBJECT-TYPE
SYNTAX PnniMapAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about an
address prefix reachable from a node in the PNNI routing
domain, as seen from the perspective of a PNNI logical node
in this switching system."
INDEX { pnniNodeIndex,
pnniMapAddrAdvertisingNodeId,
pnniMapAddrAdvertisedPortId,
pnniMapAddrIndex }
::= { pnniMapAddrTable 1 }
PnniMapAddrEntry ::=
SEQUENCE {
pnniMapAddrAdvertisingNodeId PnniNodeId,
pnniMapAddrAdvertisedPortId PnniPortId,
pnniMapAddrIndex INTEGER,
pnniMapAddrAddress AtmAddrPrefix,
pnniMapAddrPrefixLength PnniPrefixLength
}
pnniMapAddrAdvertisingNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The node ID of a node advertising reachability to the
address prefix."
::= { pnniMapAddrEntry 1 }
pnniMapAddrAdvertisedPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier used from the advertising node to reach
the given address prefix."
::= { pnniMapAddrEntry 2 }
pnniMapAddrIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary index that is used to enumerate all of the
addresses advertised by the specified node."
::= { pnniMapAddrEntry 3 }
pnniMapAddrAddress OBJECT-TYPE
SYNTAX AtmAddrPrefix
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the ATM End System Address prefix."
::= { pnniMapAddrEntry 4 }
pnniMapAddrPrefixLength OBJECT-TYPE
SYNTAX PnniPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Prefix length to be applied to the ATM End System
Address prefix."
::= { pnniMapAddrEntry 5 }
-- TNS map table
pnniMapTnsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniMapTnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of all reachable transit networks from each node
visible to the local node. The Local Node Index,
Advertising Node ID, Advertised Port ID, Transit Network
Type, Transit Network Plan, and Transit Network ID are
combined to form an instance ID for this object. The entire
object is read-only, reflecting the fact that reachable
transit networks are discovered during dynamic operation of
the PNNI protocol rather than configured."
::= { pnniMIBObjects 17 }
pnniMapTnsEntry OBJECT-TYPE
SYNTAX PnniMapTnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a
transit network reachable from a node in the PNNI routing
domain, as seen from the perspective of a PNNI logical node
in this switching system."
INDEX { pnniNodeIndex,
pnniMapTnsAdvertisingNodeId,
pnniMapTnsAdvertisedPortId,
pnniMapTnsType,
pnniMapTnsPlan,
pnniMapTnsId }
::= { pnniMapTnsTable 1 }
PnniMapTnsEntry ::=
SEQUENCE {
pnniMapTnsAdvertisingNodeId PnniNodeId,
pnniMapTnsAdvertisedPortId PnniPortId,
pnniMapTnsType TnsType,
pnniMapTnsPlan TnsPlan,
pnniMapTnsId DisplayString
}
pnniMapTnsAdvertisingNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The node ID of a node advertising reachability to the
transit network."
::= { pnniMapTnsEntry 1 }
pnniMapTnsAdvertisedPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier used from the advertising node to reach
the given transit network."
::= { pnniMapTnsEntry 2 }
pnniMapTnsType OBJECT-TYPE
SYNTAX TnsType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of network identification used for this transit
network."
::= { pnniMapTnsEntry 3 }
pnniMapTnsPlan OBJECT-TYPE
SYNTAX TnsPlan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network identification plan according to which network
identification has been assigned."
::= { pnniMapTnsEntry 4 }
pnniMapTnsId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of the transit network identifier."
::= { pnniMapTnsEntry 5 }
-- pnni metrics table
pnniMetricsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniMetricsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's table of PNNI parameters either associated
with a PNNI entity or for the connectivity between a PNNI
node and a reachable address or transit network."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3"
::= { pnniMIBObjects 18 }
pnniMetricsEntry OBJECT-TYPE
SYNTAX PnniMetricsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A set of parameters that applies to the connectivity from a
certain node and port to another node or port or to one or
more reachable address prefixes and/or transit networks,
for one (or more) particular service category(s). Note
that there can be multiple sets of parameters with the same
tag, in which case all sets apply to the specified
connectivity."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3"
INDEX { pnniNodeIndex,
pnniMetricsTag,
pnniMetricsDirection,
pnniMetricsIndex }
::= { pnniMetricsTable 1 }
PnniMetricsEntry ::=
SEQUENCE {
pnniMetricsTag PnniMetricsTag,
pnniMetricsDirection INTEGER,
pnniMetricsIndex Integer32,
pnniMetricsClasses INTEGER,
pnniMetricsGcacClp ClpType,
pnniMetricsAdminWeight Unsigned32,
pnniMetrics1 Unsigned32,
pnniMetrics2 Unsigned32,
pnniMetrics3 Unsigned32,
pnniMetrics4 Unsigned32,
pnniMetrics5 Unsigned32,
pnniMetrics6 Unsigned32,
pnniMetrics7 Unsigned32,
pnniMetrics8 Unsigned32,
pnniMetricsRowStatus RowStatus
}
pnniMetricsTag OBJECT-TYPE
SYNTAX PnniMetricsTag (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer that is used to associate a set of
traffic parameters that are always advertised together.
Within this set, the parameters are distinguished by the
service categories and direction to which a set of
parameters apply."
::= { pnniMetricsEntry 1 }
pnniMetricsDirection OBJECT-TYPE
SYNTAX INTEGER { incoming(1), outgoing(2) }
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The direction, with respect to the advertising node, in
which the parameters in this entry apply."
::= { pnniMetricsEntry 2 }
pnniMetricsIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index into the set of parameters associated with the
given tag and direction."
::= { pnniMetricsEntry 3 }
pnniMetricsClasses OBJECT-TYPE
SYNTAX INTEGER(0..31)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The service categories to which this set of parameters
applies. This is an integer used as a bit mask with each
bit that is set representing a single service category for
which the resources indicated are available. Bit 5
represents CBR, bit 4 represents real-time VBR, bit 3
represents non-real-time VBR, bit 2 represents ABR, and
bit 1 (LSB) represents UBR."
REFERENCE
"ATM Forum Traffic Management 4.0 Section 2,
ATM Forum PNNI 1.0 Section 5.8.1.1.3.1"
::= { pnniMetricsEntry 4 }
pnniMetricsGcacClp OBJECT-TYPE
SYNTAX ClpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the advertised GCAC parameters apply for
CLP=0 traffic or for CLP=0+1 traffic."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.8.1.1.3.1, 5.13.4.1"
::= { pnniMetricsEntry 5 }
pnniMetricsAdminWeight OBJECT-TYPE
SYNTAX Unsigned32 (1..16777215)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative weight from the advertising node to the
remote end of the PNNI entity or to the reachable address
or transit network, for the specified service categories."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 5040 }
::= { pnniMetricsEntry 6 }
pnniMetrics1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For information learned from PNNI nodes, this is the
maximum cell rate in cells per second for the specified
service categories.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.7"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 7 }
pnniMetrics2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For information learned from PNNI nodes, this is the
available cell rate in cells per second for the specified
service categories.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.8"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 8 }
pnniMetrics3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For information learned from PNNI nodes, this is the
maximum cell transfer delay in microseconds for the
specified service categories.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.3"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 9 }
pnniMetrics4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For information learned from PNNI nodes, this is the cell
delay variation in microseconds for the specified service
categories.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.2"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 10 }
pnniMetrics5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For PNNI, this is the cell loss ratio for CLP=0 traffic for
the specified service categories. The cell loss ratio
value is computed as 10**(-n) where 'n' is the value
returned in this variable.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.5"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 11 }
pnniMetrics6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For PNNI, this is the cell loss ratio for CLP=0+1 traffic
for the specified service categories. The cell loss ratio
value is computed as 10**(-n) where 'n' is the value
returned in this variable.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.6"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 12 }
pnniMetrics7 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For information learned from PNNI nodes, this is the cell
rate margin in cells per second for the specified service
categories.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.9"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 13 }
pnniMetrics8 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter from the advertising node to
the remote end of the PNNI entity or to the reachable
address or transit network, for the specified service
categories.
For information learned from PNNI nodes, this is the
variance factor in units of 2**(-8) for the specified
service categories.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.10"
DEFVAL { 'FFFFFFFF'h }
::= { pnniMetricsEntry 14 }
pnniMetricsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, activate and de-activate a set of
metrics."
::= { pnniMetricsEntry 15 }
--
-- PNNI Routing Tables
--
pnniRoutingGroup OBJECT IDENTIFIER ::= { pnniMIBObjects 19 }
pnniRouteBaseGroup OBJECT IDENTIFIER ::= { pnniRoutingGroup 1 }
pnniRouteNodeNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current precalculated PNNI routes to PNNI
nodes that are not invalid."
::= { pnniRouteBaseGroup 1 }
pnniRouteAddrNumber OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of current PNNI routes from nodes in the PNNI
routing domain to addresses and transit networks that are
not invalid."
::= { pnniRouteBaseGroup 2 }
-- Table of routes to other nodes
pnniRouteNodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniRouteNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This entity's PNNI Routing table (of routes to other
nodes)."
::= { pnniRoutingGroup 2 }
pnniRouteNodeEntry OBJECT-TYPE
SYNTAX PnniRouteNodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination node, under
a particular policy."
INDEX { pnniNodeIndex,
pnniRouteNodeClass,
pnniRouteNodeDestNodeId,
pnniRouteNodeDTL }
::= { pnniRouteNodeTable 1 }
PnniRouteNodeEntry ::=
SEQUENCE {
pnniRouteNodeClass ServiceCategory,
pnniRouteNodeDestNodeId PnniNodeId,
pnniRouteNodeDTL Integer32,
pnniRouteNodeDestPortId PnniPortId,
pnniRouteNodeProto INTEGER,
pnniRouteNodeTimeStamp TimeStamp,
pnniRouteNodeInfo OBJECT IDENTIFIER,
pnniRouteNodeGcacClp ClpType,
pnniRouteNodeFwdMetricAW Unsigned32,
pnniRouteNodeFwdMetric1 Unsigned32,
pnniRouteNodeFwdMetric2 Unsigned32,
pnniRouteNodeFwdMetric3 Unsigned32,
pnniRouteNodeFwdMetric4 Unsigned32,
pnniRouteNodeFwdMetric5 Unsigned32,
pnniRouteNodeFwdMetric6 Unsigned32,
pnniRouteNodeFwdMetric7 Unsigned32,
pnniRouteNodeFwdMetric8 Unsigned32,
pnniRouteNodeBwdMetricAW Unsigned32,
pnniRouteNodeBwdMetric1 Unsigned32,
pnniRouteNodeBwdMetric2 Unsigned32,
pnniRouteNodeBwdMetric3 Unsigned32,
pnniRouteNodeBwdMetric4 Unsigned32,
pnniRouteNodeBwdMetric5 Unsigned32,
pnniRouteNodeBwdMetric6 Unsigned32,
pnniRouteNodeBwdMetric7 Unsigned32,
pnniRouteNodeBwdMetric8 Unsigned32,
pnniRouteNodeVPCapability TruthValue,
pnniRouteNodeStatus RowStatus
}
pnniRouteNodeClass OBJECT-TYPE
SYNTAX ServiceCategory
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Indicates the service category with which this forwarding
table entry is associated."
::= { pnniRouteNodeEntry 1 }
pnniRouteNodeDestNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The node ID of the destination node to which this route
proceeds, and at which the DTL stack for this route
terminates."
::= { pnniRouteNodeEntry 2 }
pnniRouteNodeDTL OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index into the owning PNNI node's DTL table of the DTL
stack that goes with this route."
::= { pnniRouteNodeEntry 3 }
pnniRouteNodeDestPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port ID of the destination node at which the route
terminates. A port ID of zero indicates the node nucleus.
When the destination node is represented by the simple node
representation, this value should be set to zero."
DEFVAL { 0 }
::= { pnniRouteNodeEntry 4 }
pnniRouteNodeProto OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified
local(2), -- e.g. ilmi
mgmt(3), -- configured by management,
-- for example by SNMP or console
-- the following are all dynamic
-- routing protocols
pnni(4) -- ATM Forum PNNI
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which this route was learned."
::= { pnniRouteNodeEntry 5 }
pnniRouteNodeTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time at which this route was last updated or
otherwise determined to be correct. Note that no
semantics of `too old' can be implied except through
knowledge of the routing protocol by which the route
was learned."
::= { pnniRouteNodeEntry 6 }
pnniRouteNodeInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the particular
routing protocol which is responsible for this route, as
determined by the value specified in the route's
pnniRouteNodeProto value. If this information is not
present, its value should be set to the OBJECT IDENTIFIER
zeroDotZero."
DEFVAL { zeroDotZero }
::= { pnniRouteNodeEntry 7 }
pnniRouteNodeGcacClp OBJECT-TYPE
SYNTAX ClpType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For PNNI, indicates whether any advertised GCAC parameters
apply for CLP=0 traffic or for CLP=0+1 traffic."
::= { pnniRouteNodeEntry 8 }
pnniRouteNodeFwdMetricAW OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The cumulative administrative weight calculated for the
forward direction of this route. If this metric is not
used, its value should be set to 0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 9 }
pnniRouteNodeFwdMetric1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the
maximum possible cell rate (in cells per second) for the
forward direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.7"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 10 }
pnniRouteNodeFwdMetric2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the
Available cell rate (in cells per second) for the forward
direction of the route. Further information on available
bandwidth may be obtainable by reference to the nodal
advertisements of the nodes in the path.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.8"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 11 }
pnniRouteNodeFwdMetric3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the
cumulative Maximum Cell Transfer Delay (in microseconds)
for the forward direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.3"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 12 }
pnniRouteNodeFwdMetric4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the
cumulative Cell Delay Variation (in microseconds) for the
forward direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.2"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 13 }
pnniRouteNodeFwdMetric5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the
cumulative Cell Loss Ratio for CLP=0 traffic for the
forward direction of the route. The cell loss ratio value
is computed as 10**(-n) where 'n' is the value returned in
this variable.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.5"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 14 }
pnniRouteNodeFwdMetric6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the
cumulative Cell Loss Ratio for CLP=0+1 traffic for the
forward direction of the route. The cell loss ratio value
is computed as 10**(-n) where 'n' is the value returned in
this variable.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.6"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 15 }
pnniRouteNodeFwdMetric7 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the Cell
Rate Margin (in cells per second) for the forward direction
of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.9"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 16 }
pnniRouteNodeFwdMetric8 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the forward direction of
this route.
For information learned from PNNI nodes, this is the
Variance Factor (in units of 2**(-8)) for the forward
direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.10"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 17 }
pnniRouteNodeBwdMetricAW OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative weight calculated for the backward
direction of this route. If this metric is not used, its
value should be set to 0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.4"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 18 }
pnniRouteNodeBwdMetric1 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the
maximum possible cell rate (in cells per second) for the
backward direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.7"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 19 }
pnniRouteNodeBwdMetric2 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the
Available cell rate (in cells per second) for the backward
direction of the route. Further information on available
bandwidth may be obtainable by reference to the nodal
advertisements of the nodes in the path.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.8"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 20 }
pnniRouteNodeBwdMetric3 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the
cumulative Maximum Cell Transfer Delay (in microseconds)
for the backward direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.3"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 21 }
pnniRouteNodeBwdMetric4 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the
cumulative Cell Delay Variation (in microseconds) for the
backward direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.2"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 22 }
pnniRouteNodeBwdMetric5 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the
cumulative Cell Loss Ratio for CLP=0 traffic for the
backward direction of the route. The cell loss ratio value
is computed as 10**(-n) where 'n' is the value returned in
this variable.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.5"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 23 }
pnniRouteNodeBwdMetric6 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the
cumulative Cell Loss Ratio for CLP=0+1 traffic for the
backward direction of the route. The cell loss ratio value
is computed as 10**(-n) where 'n' is the value returned in
this variable.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.6"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 24 }
pnniRouteNodeBwdMetric7 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the Cell
Rate Margin (in cells per second) for the backward
direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.9"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 25 }
pnniRouteNodeBwdMetric8 OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An alternate routing parameter for the backward direction
of this route.
For information learned from PNNI nodes, this is the
Variance Factor (in units of 2**(-8)) for the backward
direction of the route.
If this parameter is not used, its value should be set to
0xFFFFFFFF."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.1.3.10"
DEFVAL { 'FFFFFFFF'h }
::= { pnniRouteNodeEntry 26 }
pnniRouteNodeVPCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute indicates whether a VPC setup on this route
is possible."
::= { pnniRouteNodeEntry 27 }
pnniRouteNodeStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to row installation
and removal conventions."
::= { pnniRouteNodeEntry 28 }
-- Table of DTL stacks for routes to other nodes
pnniDTLTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniDTLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The set of all DTL stacks used for the pre-computed routes
maintained by this managed entity."
::= { pnniRoutingGroup 3 }
pnniDTLEntry OBJECT-TYPE
SYNTAX PnniDTLEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A segment of a DTL stack. The complete DTL stack is formed
by traversing the rows of the table for which the
pnniDTLIndex is the same. Level transitions are indicated
using the pnniDLTLinkType column."
INDEX {
pnniNodeIndex,
pnniDTLIndex,
pnniDTLEntryIndex
}
::= { pnniDTLTable 1 }
PnniDTLEntry ::=
SEQUENCE {
pnniDTLIndex Integer32,
pnniDTLEntryIndex Integer32,
pnniDTLNodeId PnniNodeId,
pnniDTLPortId PnniPortId,
pnniDTLLinkType INTEGER,
pnniDTLStatus RowStatus
}
pnniDTLIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index in the node's DTL table of this DTL stack."
::= { pnniDTLEntry 1 }
pnniDTLEntryIndex OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index in the current DTL stack of this entry."
::= { pnniDTLEntry 2 }
pnniDTLNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The node which is this hop in the DTL stack."
::= { pnniDTLEntry 3 }
pnniDTLPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port from the pnniDTLNodeId to use as the exit. If the
DTL stack does not care, this is coded as zero."
::= { pnniDTLEntry 4 }
pnniDTLLinkType OBJECT-TYPE
SYNTAX INTEGER {
invalid (1), -- An invalid link
horizontal (2), -- A normal link within
-- the containing peer group
uplink (3), -- A link going up a
-- level
last (4) -- The last entry in the
-- DTL stack
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of link out from this node (pnniDTLNodeId). This
is well defined even if the specific port is not
specified."
::= { pnniDTLEntry 5 }
pnniDTLStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The row status variable, used according to row installation
and removal conventions."
::= { pnniDTLEntry 6 }
-- Table of routes from nodes to reachable addresses
pnniRouteAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniRouteAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing all the attributes necessary to
determine what the PNNI entity believes is reachable in
terms of ATM End System Addresses and to determine which
nodes are advertising this reachability. This table is
also used to configure static routes to reachable address
prefixes. The local node index that received the
reachability information, reachable address, address prefix
length, and an index that distinguishes between multiple
listings of connectivity to a given address prefix from a
given local node are combined to form an instance ID for
this object."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.3"
::= { pnniRoutingGroup 4 }
pnniRouteAddrEntry OBJECT-TYPE
SYNTAX PnniRouteAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a
reachable address prefix."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.3"
INDEX { pnniNodeIndex,
pnniRouteAddrAddress,
pnniRouteAddrPrefixLength,
pnniRouteAddrIndex }
::= { pnniRouteAddrTable 1 }
PnniRouteAddrEntry ::=
SEQUENCE {
pnniRouteAddrAddress AtmAddrPrefix,
pnniRouteAddrPrefixLength PnniPrefixLength,
pnniRouteAddrIndex Integer32,
pnniRouteAddrIfIndex InterfaceIndex,
pnniRouteAddrAdvertisingNodeId PnniNodeId,
pnniRouteAddrAdvertisedPortId PnniPortId,
pnniRouteAddrType INTEGER,
pnniRouteAddrProto INTEGER,
pnniRouteAddrPnniScope PnniLevel,
pnniRouteAddrVPCapability TruthValue,
pnniRouteAddrMetricsTag PnniMetricsTag,
pnniRouteAddrPtseId Unsigned32,
pnniRouteAddrOriginateAdvertisement TruthValue,
pnniRouteAddrInfo OBJECT IDENTIFIER,
pnniRouteAddrOperStatus INTEGER,
pnniRouteAddrTimeStamp TimeStamp,
pnniRouteAddrRowStatus RowStatus
}
pnniRouteAddrAddress OBJECT-TYPE
SYNTAX AtmAddrPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the ATM End System Address prefix."
::= { pnniRouteAddrEntry 1 }
pnniRouteAddrPrefixLength OBJECT-TYPE
SYNTAX PnniPrefixLength
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The prefix length to be applied to the ATM End System
Address prefix."
::= { pnniRouteAddrEntry 2 }
pnniRouteAddrIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index into the set of listings of connectivity to a
given address prefix from a given local node."
::= { pnniRouteAddrEntry 3 }
pnniRouteAddrIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local interface over which the reachable address can be
reached. The value zero indicates an unknown interface or
reachability through a remote node.
This object may only have a non-zero value if the value of
the corresponding instance of pnniRouteAddrProto is other
than 'pnni', pnniRouteAddrType is other than 'reject', and
the node identified by pnniRouteAddrAdvertisingNodeId is
instantiated within this switching system."
::= { pnniRouteAddrEntry 4 }
pnniRouteAddrAdvertisingNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The node ID of a node advertising reachability to the
address prefix. If the local node index is zero, then the
advertising node ID must be set to all zeros."
::= { pnniRouteAddrEntry 5 }
pnniRouteAddrAdvertisedPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port identifier used from the advertising node to reach
the given address prefix."
DEFVAL { 0 }
::= { pnniRouteAddrEntry 6 }
pnniRouteAddrType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified by this MIB
reject(2), -- route which discards
-- traffic
internal(3),
exterior(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type (e.g. internal or exterior) of reachability from
the advertising node to the address prefix.
Reject(2) refers to an address prefix which, if matched,
indicates that the message should be discarded as
unreachable. This is used in some protocols as a means of
correctly aggregating routes."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.3"
DEFVAL { exterior }
::= { pnniRouteAddrEntry 7 }
pnniRouteAddrProto OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified
local(2), -- e.g. ilmi
mgmt(3), -- configured by management,
-- for example by SNMP or console
-- the following are all dynamic
-- routing protocols
pnni(4) -- ATM Forum PNNI
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which the connectivity from the
advertising node to the reachable address prefix was
learned."
::= { pnniRouteAddrEntry 8 }
pnniRouteAddrPnniScope OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The PNNI scope of advertisement (i.e. level of PNNI
hierarchy) of the reachability from the advertising node to
the address prefix."
REFERENCE
"ATM Forum PNNI 1.0 Sections 5.3.6, 5.9.1"
::= { pnniRouteAddrEntry 9 }
pnniRouteAddrVPCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether VPCs can be established from the
advertising node to the reachable address prefix."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.14.9.1 Table 5-34"
::= { pnniRouteAddrEntry 10 }
pnniRouteAddrMetricsTag OBJECT-TYPE
SYNTAX PnniMetricsTag
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index into the pnniMetricsTable for the traffic
parameter values that apply for the connectivity from the
advertising node to the reachable address prefix. There
will be one or more entries in the pnniMetricsTable whose
first instance identifier matches the value of this
variable.
If there are no parameters associated with this reachable
address prefix then the distinguished value zero is used."
DEFVAL { 0 }
::= { pnniRouteAddrEntry 11 }
pnniRouteAddrPtseId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For reachable addresses learned via PNNI, this attribute
contains the value of the PTSE Identifier for the PTSE
being originated by the originating node which contains the
information group(s) describing the reachable address. For
reachable addresses learned by means other than PNNI, this
attribute is set to zero."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.2"
::= { pnniRouteAddrEntry 12 }
pnniRouteAddrOriginateAdvertisement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether or not the reachable address specified by this
entry is to be advertised by the local node into its PNNI
routing domain.
This object may only take on the value 'true' when the
value of the corresponding instance of pnniRouteAddrProto
is other than 'pnni'."
DEFVAL { true }
::= { pnniRouteAddrEntry 13 }
pnniRouteAddrInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the particular
routing protocol which is responsible for this reachable
address prefix, as determined by the value specified in the
route's pnniRouteAddrProto value. If this information is
not present, its value should be set to the OBJECT
IDENTIFIER zeroDotZero."
DEFVAL { zeroDotZero }
::= { pnniRouteAddrEntry 14 }
pnniRouteAddrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2), -- i.e. reachability to this
-- prefix exists and is not
-- being advertised in PNNI
advertised(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the reachable address prefix is
operationally valid and whether it is being advertised by
this node."
::= { pnniRouteAddrEntry 15 }
pnniRouteAddrTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates when the connectivity from the advertising node
to the reachable address prefix became known to the local
node."
::= { pnniRouteAddrEntry 16 }
pnniRouteAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, activate and de-activate a reachable
address prefix."
::= { pnniRouteAddrEntry 17 }
-- Table of routes from nodes to reachable transit networks
pnniRouteTnsTable OBJECT-TYPE
SYNTAX SEQUENCE OF PnniRouteTnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing all the attributes necessary to
determine what transit networks the PNNI entity believes
are reachable and to determine which nodes are advertising
this reachability. This table is also used to add static
routes to reachable transit networks. The local node index
which received the reachability information, type of
network identification, network identification plan,
transit network identifier, and an index that distinguishes
between multiple listings of connectivity to a given
transit network from a given local node are combined to
form an instance ID for this object."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.3.2"
::= { pnniRoutingGroup 5 }
pnniRouteTnsEntry OBJECT-TYPE
SYNTAX PnniRouteTnsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a
reachable transit network."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.3.2"
INDEX { pnniNodeIndex,
pnniRouteTnsType,
pnniRouteTnsPlan,
pnniRouteTnsId,
pnniRouteTnsIndex }
::= { pnniRouteTnsTable 1 }
PnniRouteTnsEntry ::=
SEQUENCE {
pnniRouteTnsType TnsType,
pnniRouteTnsPlan TnsPlan,
pnniRouteTnsId DisplayString,
pnniRouteTnsIndex Integer32,
pnniRouteTnsIfIndex InterfaceIndex,
pnniRouteTnsAdvertisingNodeId PnniNodeId,
pnniRouteTnsAdvertisedPortId PnniPortId,
pnniRouteTnsRouteType INTEGER,
pnniRouteTnsProto INTEGER,
pnniRouteTnsPnniScope PnniLevel,
pnniRouteTnsVPCapability TruthValue,
pnniRouteTnsMetricsTag PnniMetricsTag,
pnniRouteTnsPtseId Unsigned32,
pnniRouteTnsOriginateAdvertisement TruthValue,
pnniRouteTnsInfo OBJECT IDENTIFIER,
pnniRouteTnsOperStatus INTEGER,
pnniRouteTnsTimeStamp TimeStamp,
pnniRouteTnsRowStatus RowStatus
}
pnniRouteTnsType OBJECT-TYPE
SYNTAX TnsType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of network identification used for this transit
network."
::= { pnniRouteTnsEntry 1 }
pnniRouteTnsPlan OBJECT-TYPE
SYNTAX TnsPlan
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network identification plan according to which network
identification has been assigned."
::= { pnniRouteTnsEntry 2 }
pnniRouteTnsId OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the transit network identifier."
::= { pnniRouteTnsEntry 3 }
pnniRouteTnsIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index into the set of listings of connectivity to a
given transit network from a given local node."
::= { pnniRouteTnsEntry 4 }
pnniRouteTnsIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local interface over which the transit network can be
reached. The value zero indicates an unknown interface or
reachability through a remote node.
This object may only have a non-zero value if the value of
the corresponding instance of pnniRouteTnsProto is other
than 'pnni' and the node identified by
pnniRouteTnsAdvertisingNodeId is instantiated within this
switching system."
::= { pnniRouteTnsEntry 5 }
pnniRouteTnsAdvertisingNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The node ID of a node advertising reachability to the
transit network. If the local node index is zero, then the
advertising node ID must also be set to zero."
::= { pnniRouteTnsEntry 6 }
pnniRouteTnsAdvertisedPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The port identifier used from the advertising node to
reach the given transit network."
DEFVAL { 0 }
::= { pnniRouteTnsEntry 7 }
pnniRouteTnsRouteType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified by this MIB
exterior(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type (e.g. exterior or other) of reachability from the
advertising node to the transit network."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.3"
DEFVAL { exterior }
::= { pnniRouteTnsEntry 8 }
pnniRouteTnsProto OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified
local(2), -- e.g. ilmi
mgmt(3), -- configured by management,
-- for example by SNMP or console
-- the following are all dynamic
-- routing protocols
pnni(4) -- ATM Forum PNNI
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The routing mechanism via which the connectivity from the
advertising node to the transit network was learned."
::= { pnniRouteTnsEntry 9 }
pnniRouteTnsPnniScope OBJECT-TYPE
SYNTAX PnniLevel
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The PNNI scope of advertisement (i.e. level of PNNI
hierarchy) of the reachability from the advertising node to
the transit network."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.3.6"
::= { pnniRouteTnsEntry 10 }
pnniRouteTnsVPCapability OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether VPCs can be established from the
advertising node to the reachable transit network."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.14.9.1 Table 5-34"
::= { pnniRouteTnsEntry 11 }
pnniRouteTnsMetricsTag OBJECT-TYPE
SYNTAX PnniMetricsTag
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The index into the pnniMetricsTable for the traffic
parameter values that apply for the connectivity from the
advertising node to the transit network. There will be one
or more entries in the pnniMetricsTable whose first
instance identifier matches the value of this variable.
If there are no parameters associated with this transit
network then the distinguished value zero is used."
DEFVAL { 0 }
::= { pnniRouteTnsEntry 12 }
pnniRouteTnsPtseId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"For reachable transit networks learned via PNNI, this
attribute contains the value of the PTSE Identifier for the
PTSE being originated by the originating node which
contains the information group(s) describing the transit
network. For reachable transit networks learned by means
other than PNNI, this attribute is set to zero."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.2"
::= { pnniRouteTnsEntry 13 }
pnniRouteTnsOriginateAdvertisement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether or not the transit network specified by this entry
is to be advertised by the local node into its PNNI routing
domain.
This object may only take on the value 'true' when the
value of the corresponding instance of pnniRouteNodeProto
is other than 'pnni'."
DEFVAL { true }
::= { pnniRouteTnsEntry 14 }
pnniRouteTnsInfo OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A reference to MIB definitions specific to the particular
routing protocol which is responsible for this transit
network, as determined by the value specified in the
route's pnniRouteTnsProto value. If this information is
not present, its value should be set to the OBJECT
IDENTIFIER zeroDotZero."
DEFVAL { zeroDotZero }
::= { pnniRouteTnsEntry 15 }
pnniRouteTnsOperStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1),
active(2), -- i.e. reachability to this
-- transit network exists and is
-- not being advertised in PNNI
advertised(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether the reachable transit network is
operationally valid and whether it is being advertised by
this node."
::= { pnniRouteTnsEntry 16 }
pnniRouteTnsTimeStamp OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates how long the connectivity from the advertising
node to the reachable transit network has been known to the
local node."
::= { pnniRouteTnsEntry 17 }
pnniRouteTnsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create, delete, activate and de-activate a reachable
transit network."
::= { pnniRouteTnsEntry 18 }
-- conformance information
pnniMIBConformance
OBJECT IDENTIFIER ::= { pnniMIB 2 }
pnniMIBCompliances
OBJECT IDENTIFIER ::= { pnniMIBConformance 1 }
pnniMIBGroups
OBJECT IDENTIFIER ::= { pnniMIBConformance 2 }
-- compliance statements
pnniMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the PNNI MIB.
Groups of PNNI objects required for management of a minimum
function node are identified by the suffix MinGroup.
Groups of PNNI objects required for management of a border
node are identified by the suffix BorderGroup.
Groups of PNNI objects required for management of a PGL/LGN
capable node are identified by the suffix LgnGroup.
Groups of optional PNNI objects are identified by the
suffix OptionalGroup."
MODULE -- this module
MANDATORY-GROUPS { pnniGeneralMinGroup,
pnniNodeMinGroup,
pnniNodePglMinGroup,
pnniNodeTimerMinGroup,
pnniScopeMinGroup,
pnniIfMinGroup,
pnniLinkMinGroup,
pnniNbrPeerMinGroup,
pnniNbrPeerPortMinGroup }
OBJECT pnniNodeId
MIN-ACCESS read-only
DESCRIPTION
"Support for manual configuration of node IDs is optional."
OBJECT pnniNodeLowest
MIN-ACCESS read-only
DESCRIPTION
"Only switching systems that are PGL/LGN capable are allowed
to provide write/create access to the pnniNodeLowest
object."
OBJECT pnniNodeRestrictedTransit
MIN-ACCESS read-only
DESCRIPTION
"Support for the restricted transit capability is optional."
OBJECT pnniNodeComplexRep
MIN-ACCESS read-only
DESCRIPTION
"The ability to generate the complex node representation is
only required for PGL/LGN capable switching systems, and is
otherwise optional."
OBJECT pnniNodeRowStatus
SYNTAX INTEGER { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"The ability to create more than one node in a switching
system is optional."
OBJECT pnniNodePglLeadershipPriority
MIN-ACCESS read-only
DESCRIPTION
"Only switching systems that are PGL/LGN capable are allowed
to provide write/create access to the
pnniNodePglLeadershipPriority object."
OBJECT pnniIfNodeIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access to the pnniIfNodeIndex object is optional. It
only applies when there can be multiple lowest-level nodes
in the switching system."
OBJECT pnniIfVPCapability
MIN-ACCESS read-only
DESCRIPTION
"The ability to support switched virtual paths is optional."
::= { pnniMIBCompliances 1 }
-- units of conformance
pnniGeneralMinGroup OBJECT-GROUP
OBJECTS {
pnniHighestVersion,
pnniLowestVersion,
pnniDtlCountOriginator,
pnniCrankbackCountOriginator,
pnniAltRouteCountOriginator,
pnniRouteFailCountOriginator,
pnniRouteFailUnreachableOriginator
}
STATUS current
DESCRIPTION
"A collection of general PNNI objects required for
management of a minimum function switching system."
::= { pnniMIBGroups 1 }
pnniGeneralBorderGroup OBJECT-GROUP
OBJECTS {
pnniDtlCountBorder,
pnniCrankbackCountBorder,
pnniAltRouteCountBorder,
pnniRouteFailCountBorder,
pnniRouteFailUnreachableBorder
}
STATUS current
DESCRIPTION
"A collection of general PNNI objects required for
management of a border node."
::= { pnniMIBGroups 2 }
pnniNodeMinGroup OBJECT-GROUP
OBJECTS {
pnniNodeLevel,
pnniNodeId,
pnniNodeLowest,
pnniNodeAdminStatus,
pnniNodeOperStatus,
pnniNodeDomainName,
pnniNodeAtmAddress,
pnniNodePeerGroupId,
pnniNodeRestrictedTransit,
pnniNodeComplexRep,
pnniNodeRestrictedBranching,
pnniNodeDatabaseOverload,
pnniNodePtses,
pnniNodeRowStatus
}
STATUS current
DESCRIPTION
"A collection of per node PNNI objects required for
management of a minimum function switching system."
::= { pnniMIBGroups 3 }
pnniNodePglMinGroup OBJECT-GROUP
OBJECTS {
pnniNodePglLeadershipPriority,
pnniNodePglInitTime,
pnniNodePglReelectTime ,
pnniNodePglState,
pnniNodePreferredPgl,
pnniNodePeerGroupLeader,
pnniNodePglTimeStamp,
pnniNodeActiveParentNodeId
}
STATUS current
DESCRIPTION
"A collection of per node PGL election related PNNI objects
required for management of a minimum function switching
system."
::= { pnniMIBGroups 4 }
pnniNodePglLgnGroup OBJECT-GROUP
OBJECTS {
pnniNodeCfgParentNodeIndex,
pnniNodePglOverrideDelay
}
STATUS current
DESCRIPTION
"A collection of per node PGL election related PNNI objects
required for management of a PGL/LGN capable switching
system."
::= { pnniMIBGroups 5 }
pnniNodeTimerMinGroup OBJECT-GROUP
OBJECTS {
pnniNodePtseHolddown,
pnniNodeHelloHolddown,
pnniNodeHelloInterval,
pnniNodeHelloInactivityFactor,
pnniNodePtseRefreshInterval,
pnniNodePtseLifetimeFactor,
pnniNodeRxmtInterval,
pnniNodePeerDelayedAckInterval,
pnniNodeAvcrPm,
pnniNodeAvcrMt,
pnniNodeCdvPm,
pnniNodeCtdPm
}
STATUS current
DESCRIPTION
"A collection of per node PNNI objects required for
management of timers and significant change thresholds in a
minimum function switching system."
::= { pnniMIBGroups 6 }
pnniNodeTimerLgnGroup OBJECT-GROUP
OBJECTS {
pnniNodeHlinkInact
}
STATUS current
DESCRIPTION
"A collection of per node PNNI objects required for
management of timers in a PGL/LGN capable switching
system."
::= { pnniMIBGroups 7 }
pnniNodeSvccLgnGroup OBJECT-GROUP
OBJECTS {
pnniNodeSvccInitTime,
pnniNodeSvccRetryTime,
pnniNodeSvccCallingIntegrityTime,
pnniNodeSvccCalledIntegrityTime,
pnniNodeSvccTrafficDescriptorIndex
}
STATUS current
DESCRIPTION
"A collection of per node SVCC-based RCC related PNNI
objects required for management of a PGL/LGN capable
switching system."
::= { pnniMIBGroups 8 }
pnniScopeMinGroup OBJECT-GROUP
OBJECTS {
pnniScopeLocalNetwork,
pnniScopeLocalNetworkPlusOne,
pnniScopeLocalNetworkPlusTwo,
pnniScopeSiteMinusOne,
pnniScopeIntraSite,
pnniScopeSitePlusOne,
pnniScopeOrganizationMinusOne,
pnniScopeIntraOrganization,
pnniScopeOrganizationPlusOne,
pnniScopeCommunityMinusOne,
pnniScopeIntraCommunity,
pnniScopeCommunityPlusOne,
pnniScopeRegional,
pnniScopeInterRegional,
pnniScopeGlobal
}
STATUS current
DESCRIPTION
"A collection of per node scope mapping related PNNI objects
required for management of a minimum function switching
system."
::= { pnniMIBGroups 9 }
pnniSummaryLgnGroup OBJECT-GROUP
OBJECTS {
pnniSummaryType,
pnniSummarySuppress,
pnniSummaryState,
pnniSummaryRowStatus
}
STATUS deprecated
DESCRIPTION
"A collection of PNNI objects required for controlling
address summarization."
::= { pnniMIBGroups 10 }
pnniSummaryAddressLgnGroup OBJECT-GROUP
OBJECTS {
pnniSummaryAddressSuppress,
pnniSummaryAddressState,
pnniSummaryAddressRowStatus
}
STATUS current
DESCRIPTION
"A collection of PNNI objects required for controlling address
summarization."
::= { pnniMIBGroups 31 }
pnniIfMinGroup OBJECT-GROUP
OBJECTS {
pnniIfNodeIndex,
pnniIfPortId,
pnniIfVPCapability,
pnniIfAdmWeightCbr,
pnniIfAdmWeightRtVbr,
pnniIfAdmWeightNrtVbr,
pnniIfAdmWeightAbr,
pnniIfAdmWeightUbr,
pnniIfRccServiceCategory,
pnniIfRccTrafficDescrIndex
}
STATUS current
DESCRIPTION
"A collection of per interface PNNI objects required for
management of a minimum function switching system."
::= { pnniMIBGroups 11 }
pnniIfBorderGroup OBJECT-GROUP
OBJECTS {
pnniIfAggrToken
}
STATUS current
DESCRIPTION
"A collection of per interface PNNI objects required for
management of a border node."
::= { pnniMIBGroups 12 }
pnniLinkMinGroup OBJECT-GROUP
OBJECTS {
pnniLinkType,
pnniLinkVersion,
pnniLinkHelloState,
pnniLinkRemoteNodeId,
pnniLinkRemotePortId,
pnniLinkIfIndex,
pnniLinkRcvHellos,
pnniLinkXmtHellos
}
STATUS current
DESCRIPTION
"A collection of per link PNNI objects required for
management of a minimum function switching system."
::= { pnniMIBGroups 13 }
pnniLinkBorderOrLgnGroup OBJECT-GROUP
OBJECTS {
pnniLinkDerivedAggrToken,
pnniLinkUpnodeId,
pnniLinkUpnodeAtmAddress,
pnniLinkCommonPeerGroupId
}
STATUS current
DESCRIPTION
"A collection of per link PNNI objects required for
management of a border node or a PGL/LGN capable switching
system."
::= { pnniMIBGroups 14 }
pnniLinkLgnGroup OBJECT-GROUP
OBJECTS {
pnniLinkSvccRccIndex
}
STATUS current
DESCRIPTION
"A collection of per link PNNI objects required for
management of a PGL/LGN capable switching system."
::= { pnniMIBGroups 15 }
pnniNbrPeerMinGroup OBJECT-GROUP
OBJECTS {
pnniNbrPeerState,
pnniNbrPeerPortCount,
pnniNbrPeerRcvDbSums,
pnniNbrPeerXmtDbSums,
pnniNbrPeerRcvPtsps,
pnniNbrPeerXmtPtsps,
pnniNbrPeerRcvPtseReqs,
pnniNbrPeerXmtPtseReqs,
pnniNbrPeerRcvPtseAcks,
pnniNbrPeerXmtPtseAcks
}
STATUS current
DESCRIPTION
"A collection of per neighboring peer PNNI objects required
for management of a minimum function switching system."
::= { pnniMIBGroups 16 }
pnniNbrPeerLgnGroup OBJECT-GROUP
OBJECTS {
pnniNbrPeerSvccRccIndex
}
STATUS current
DESCRIPTION
"A collection of per neighboring peer PNNI objects required
for management of a PGL/LGN capable switching system."
::= { pnniMIBGroups 17 }
pnniNbrPeerPortMinGroup OBJECT-GROUP
OBJECTS {
pnniNbrPeerPortFloodStatus
}
STATUS current
DESCRIPTION
"A collection of per port to neighboring peer PNNI objects
required for management of a minimum function switching
system."
::= { pnniMIBGroups 18 }
pnniSvccRccLgnGroup OBJECT-GROUP
OBJECTS {
pnniSvccRccVersion,
pnniSvccRccHelloState,
pnniSvccRccRemoteNodeId ,
pnniSvccRccRemoteAtmAddress,
pnniSvccRccRcvHellos,
pnniSvccRccXmtHellos,
pnniSvccRccIfIndex,
pnniSvccRccVpi,
pnniSvccRccVci
}
STATUS current
DESCRIPTION
"A collection of per SVCC-based RCC PNNI objects required
for management of a PGL/LGN capable switching system."
::= { pnniMIBGroups 19 }
pnniPtseOptionalGroup OBJECT-GROUP
OBJECTS {
pnniPtseType,
pnniPtseSequenceNum,
pnniPtseChecksum,
pnniPtseLifeTime,
pnniPtseInfo
}
STATUS current
DESCRIPTION
"A collection of optional per PTSE PNNI objects."
::= { pnniMIBGroups 20 }
pnniMapOptionalGroup OBJECT-GROUP
OBJECTS {
pnniMapType,
pnniMapPeerGroupId,
pnniMapAggrToken,
pnniMapRemoteNodeId,
pnniMapRemotePortId,
pnniMapVPCapability,
pnniMapPtseId,
pnniMapMetricsTag
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to create a map
of nodes and links in the PNNI routing domain."
::= { pnniMIBGroups 21 }
pnniMapNodeOptionalGroup OBJECT-GROUP
OBJECTS {
pnniMapNodePeerGroupId,
pnniMapNodeAtmAddress,
pnniMapNodeRestrictedTransit,
pnniMapNodeComplexRep,
pnniMapNodeRestrictedBranching,
pnniMapNodeDatabaseOverload,
pnniMapNodeIAmLeader,
pnniMapNodeLeadershipPriority,
pnniMapNodePreferredPgl,
pnniMapNodeParentNodeId,
pnniMapNodeParentAtmAddress,
pnniMapNodeParentPeerGroupId,
pnniMapNodeParentPglNodeId
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to create a map
of nodes in the PNNI routing domain."
::= { pnniMIBGroups 22 }
pnniMapAddrOptionalGroup OBJECT-GROUP
OBJECTS {
pnniMapAddrAddress,
pnniMapAddrPrefixLength
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to create a map
of reachable addresses in the PNNI routing domain."
::= { pnniMIBGroups 23 }
pnniMapTnsOptionalGroup OBJECT-GROUP
OBJECTS {
pnniMapTnsId
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to create a map
of reachable transit networks in the PNNI routing domain."
::= { pnniMIBGroups 24 }
pnniMetricsOptionalGroup OBJECT-GROUP
OBJECTS {
pnniMetricsClasses,
pnniMetricsGcacClp,
pnniMetricsAdminWeight,
pnniMetrics1,
pnniMetrics2,
pnniMetrics3,
pnniMetrics4,
pnniMetrics5,
pnniMetrics6,
pnniMetrics7,
pnniMetrics8,
pnniMetricsRowStatus
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to manage
metrics and attributes associated with PNNI entities."
::= { pnniMIBGroups 25 }
pnniRouteGeneralOptionalGroup OBJECT-GROUP
OBJECTS {
pnniRouteNodeNumber,
pnniRouteAddrNumber
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects."
::= { pnniMIBGroups 26 }
pnniRouteNodeOptionalGroup OBJECT-GROUP
OBJECTS {
pnniRouteNodeDestPortId,
pnniRouteNodeProto,
pnniRouteNodeTimeStamp,
pnniRouteNodeInfo,
pnniRouteNodeGcacClp,
pnniRouteNodeFwdMetricAW,
pnniRouteNodeFwdMetric1,
pnniRouteNodeFwdMetric2,
pnniRouteNodeFwdMetric3,
pnniRouteNodeFwdMetric4,
pnniRouteNodeFwdMetric5,
pnniRouteNodeFwdMetric6,
pnniRouteNodeFwdMetric7,
pnniRouteNodeFwdMetric8,
pnniRouteNodeBwdMetricAW,
pnniRouteNodeBwdMetric1,
pnniRouteNodeBwdMetric2,
pnniRouteNodeBwdMetric3,
pnniRouteNodeBwdMetric4,
pnniRouteNodeBwdMetric5,
pnniRouteNodeBwdMetric6,
pnniRouteNodeBwdMetric7,
pnniRouteNodeBwdMetric8,
pnniRouteNodeVPCapability,
pnniRouteNodeStatus
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to manage
precalculated routes to nodes in the PNNI routing domain."
::= { pnniMIBGroups 27 }
pnniDTLOptionalGroup OBJECT-GROUP
OBJECTS {
pnniDTLNodeId,
pnniDTLPortId,
pnniDTLLinkType,
pnniDTLStatus
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to manage
precalculated routes to nodes in the PNNI routing domain."
::= { pnniMIBGroups 28 }
pnniRouteAddrOptionalGroup OBJECT-GROUP
OBJECTS {
pnniRouteAddrIfIndex,
pnniRouteAddrAdvertisingNodeId,
pnniRouteAddrAdvertisedPortId,
pnniRouteAddrType,
pnniRouteAddrProto,
pnniRouteAddrPnniScope,
pnniRouteAddrVPCapability,
pnniRouteAddrMetricsTag,
pnniRouteAddrPtseId,
pnniRouteAddrOriginateAdvertisement,
pnniRouteAddrInfo,
pnniRouteAddrOperStatus,
pnniRouteAddrTimeStamp,
pnniRouteAddrRowStatus
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to manage routes
to reachable addresses in the PNNI routing domain."
::= { pnniMIBGroups 29 }
pnniRouteTnsOptionalGroup OBJECT-GROUP
OBJECTS {
pnniRouteTnsIfIndex,
pnniRouteTnsAdvertisingNodeId,
pnniRouteTnsAdvertisedPortId,
pnniRouteTnsRouteType,
pnniRouteTnsProto,
pnniRouteTnsPnniScope,
pnniRouteTnsVPCapability,
pnniRouteTnsMetricsTag,
pnniRouteTnsPtseId,
pnniRouteTnsOriginateAdvertisement,
pnniRouteTnsInfo,
pnniRouteTnsOperStatus,
pnniRouteTnsTimeStamp,
pnniRouteTnsRowStatus
}
STATUS current
DESCRIPTION
"A collection of optional PNNI objects used to manage routes
to reachable transit networks in the PNNI routing domain."
::= { pnniMIBGroups 30 }
END
Reference in New Issue View Git Blame Copy Permalink