snmp_mib_archive/PCUBE-CONFIG-COPY.my

-- ****
-- *------------------------------------------------------------------
-- * PCUBE-CONFIG-COPY-MIB.my:  Main SNMP MIB for copying Cisco SCE 
--*  config
-- *
-- * PCube was acquired by Cisco Systems on August 23, 2004 
-- *
-- * Copyright (c) 2006 by Cisco Systems, Inc.
-- * All rights reserved.
-- *
-- *------------------------------------------------------------------
-- ****


PCUBE-CONFIG-COPY-MIB DEFINITIONS ::= BEGIN

IMPORTS
    pcubeMgmt
        FROM PCUBE-SMI
    MODULE-IDENTITY, OBJECT-TYPE, Integer32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION, RowStatus
        FROM SNMPv2-TC
     MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF;

pcubeConfigCopyMIB  MODULE-IDENTITY
    LAST-UPDATED "200604062000Z"
    ORGANIZATION "Cisco Systems, Inc."
    CONTACT-INFO
                 "Cisco Systems
                  Customer Service
                  
           Postal: 170 W Tasman Drive
                   San Jose, CA  95134
                   USA

              Tel: +1 800 553-NETS

           E-mail: cs-sce@cisco.com"
    DESCRIPTION
        "This MIB facilitates writing of  running
         configuration of the SCOS to 
         startup configuration.
         A config-copy operation is a request to 
         copy a configuration file of a running 
         SCOS. The term 'agent-config' will 
         be used in this MIB to refer to either
         the running config or the startup config.
         The term SCE refers to Service Control Engine"
    REVISION "200604062000Z"
    DESCRIPTION
         "The original mib has been chagned to use SMIv2 syntax.
         Clarified descriptions in the mib."
    REVISION    "200201142000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { pcubeMgmt 1 }

ConfigFileType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "The various types of files on which a config-copy
        operation can be performed."
    SYNTAX INTEGER {
        startupConfig(1),  --The configuration file containing    
                           --the configurations in SCOS startup.  
        runningConfig(2)   --The configuration currently applied
                           --to the SCOS.
    }                                         
pcubeConfigCopyMIBObjects OBJECT IDENTIFIER ::= { pcubeConfigCopyMIB 1 }
pcubeConfigCopyMIBConformance    OBJECT IDENTIFIER 
                            ::= { pcubeConfigCopyMIB 2 }
pcubeConfigCopyMIBGroups         OBJECT IDENTIFIER 
                            ::= { pcubeConfigCopyMIBConformance 1 }
pcubeConfigCopyMIBCompliances    OBJECT IDENTIFIER 
                            ::= { pcubeConfigCopyMIBConformance 2 }
       
pcubeCopy   OBJECT IDENTIFIER ::= { pcubeConfigCopyMIBObjects 1 }

pcubeCopyTable OBJECT-TYPE
    SYNTAX SEQUENCE OF PcubeCopyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A table of config-copy requests."
    ::= { pcubeCopy 1 }

pcubeCopyEntry OBJECT-TYPE
    SYNTAX PcubeCopyEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "A config-copy request.

        A management station wishing to save the running config
        may use any number to be used as an index.
        The station should then create the associated instance of the 
        row status and row index objects.  
        It should be noted however that currently 
        'pcubeCopySourceFileType' must be of 'runningConfig' type and 
        'pcubeCopyDestFileType' must be of 'startupConfig' type 
        (that are the default values).
        
        After setting pcubeCopySourceFileType and pcubeCopyDestFileType
        objects by explicit SNMP request or or by default, the row status
        should be set to createAndGo to initiate the request. 
        Note that this entire procedure may be initiated 
        via a single set request which specifies a row 
        status of 'createAndGo(4)'."
    INDEX { pcubeCopyIndex }
    ::= { pcubeCopyTable 1 }

PcubeCopyEntry ::=
    SEQUENCE {
        pcubeCopyIndex              Integer32,
        
        -- status items
        pcubeCopyEntryRowStatus     RowStatus,

        -- configuration items
        pcubeCopySourceFileType     ConfigFileType,
        pcubeCopyDestFileType       ConfigFileType
        
            }

pcubeCopyIndex OBJECT-TYPE
    SYNTAX     Integer32(1..2147483647)
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "Object which specifies a unique entry in the
        pcubeCopyTable.  A management station wishing
        to initiate a config-copy operation should use a
        random value for this object when creating
        or modifying an instance of a 'pcubeCopyEntry'.
        The RowStatus semantics of the 'pcubeCopyEntryRowStatus'
        object will prevent access conflicts."
    ::= { pcubeCopyEntry 1 }
    

pcubeCopyEntryRowStatus OBJECT-TYPE
    SYNTAX     RowStatus
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "This object can be used for creating/deleting entries 
        from the table."
    ::= { pcubeCopyEntry 2 }

pcubeCopySourceFileType OBJECT-TYPE
    SYNTAX     ConfigFileType
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Specifies the type of file to copy from. 
        Currently only 'runningConfig(2)' is supported."
    ::= { pcubeCopyEntry 3 }

pcubeCopyDestFileType OBJECT-TYPE
    SYNTAX     ConfigFileType
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Specifies the type of file to copy to.
        currently only 'startupConfig(1)' is supported."
    ::= { pcubeCopyEntry 4 }


--Compliances

pcubeConfigCopyMIBCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "A compliance statement defined in this MIB module,
         for SCE SNMP agents."
    MODULE  -- this module
        MANDATORY-GROUPS { pcubeCopyGroup }
                    ::= { pcubeConfigCopyMIBCompliances 1 }

pcubeCopyGroup OBJECT-GROUP
                OBJECTS { pcubeCopyEntryRowStatus,
                          pcubeCopySourceFileType,
                          pcubeCopyDestFileType }
                STATUS  current
                DESCRIPTION "A collection of objects used for specifying 
                            the configuration of the copy operation."
                ::= { pcubeConfigCopyMIBGroups 1 }
END