MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/NTN-QOS-POLICY-AUX-MIB.mib
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

762 lines
26 KiB
Plaintext
Raw Blame History

NTN-QOS-POLICY-AUX-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
Counter64
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue, RowStatus, StorageType
FROM SNMPv2-TC
InterfaceIndex
FROM IF-MIB
RoleCombination, PolicyInstanceId
FROM POLICY-FRAMEWORK-PIB
qosTargetEntry
FROM QOS-POLICY-IP-PIB
ntnQosIfParametersExt
FROM NTN-QOS-POLICY-EXT-PIB
policy
FROM SYNOPTICS-ROOT-MIB;
ntnQosPolicyAuxMib MODULE-IDENTITY
LAST-UPDATED "200407200000Z" -- July 20, 2004
ORGANIZATION "Nortel Networks, Inc."
CONTACT-INFO
"Editor: John Seligson
Nortel Networks, Inc.
Postal: 4401 Great America Parkway
Santa Clara, CA USA 95054
Tel: +1 408 495-2992
E-mail: jseligso@nortelnetworks.com"
DESCRIPTION
"This module defines an infrastructure used
for support of policy-based traffic processing
in a network device."
REVISION "200407200000Z" -- 20 July 2004
DESCRIPTION "Version 3: Added version info"
::= { policy 5 }
ntnQosPolicyAuxObjects OBJECT IDENTIFIER ::= { ntnQosPolicyAuxMib 1 }
ntnQosPolicyAuxConformance OBJECT IDENTIFIER ::= { ntnQosPolicyAuxMib 2 }
ntnQosConfig OBJECT IDENTIFIER ::= { ntnQosPolicyAuxObjects 1 }
ntnQosStatistics OBJECT IDENTIFIER ::= { ntnQosPolicyAuxObjects 2 }
--
-- Nortel QoS Policy Configuration Objects
--
-- The Nortel QoS Configuration objects support the
-- configuration of QoS Policy Agent characteristics.
--
ntnQosConfigDynamicMgmt OBJECT-TYPE
SYNTAX INTEGER {
enabled(1), -- COPS config enabled
disabled(2) -- COPS config disabled
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether dynamic management (e.g., COPS-PR)
is currently enabled. Devices may limit support for
dynamic management by providing read-only access
to this object. If enabled, dynamic management always
takes precedence over static management such that
static management may only be used for monitoring of
objects that have a POLICY-ACCESS clause of 'install'
or 'install-notify' in the respective PIB module.
Disabling dynamic management causes Delete Request
State (DRQ) and Client Close (CC) messages to be
generated if a connection between the PEP and a PDP
is currently established. Installed policies are
not automatically deleted. Enabling dynamic management
will initiate the COPS-PR connect sequence and,
potentailly, the loading of policy information."
::= { ntnQosConfig 1 }
ntnQosConfigQpaState OBJECT-TYPE
SYNTAX INTEGER {
running(1),
initializing(2),
resetToDefault(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of the QoS Policy Agent (QPA). A state of
'running(1)' indicates that the QPA is in a stable
state and can process messages. A state of
'initializing(2)' indicates that the agent is
currently unable to process messages. Either
'running(1)' or 'initializing(2)' will be returned
when querying this object. These values can not be
set.
All installed state can be deleted and reset to
the device's default state by setting the value
of this object to 'resetToDefault(3)'. This is
the only value that will be accepted when setting
this object. The 'resetToDefault(3)' value will
never be returned in response to a query."
::= { ntnQosConfig 2 }
ntnQosConfigQpaRetryTimer OBJECT-TYPE
SYNTAX Integer32 (-1 | 1..86400)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds between the receipt of a
connection termination/rejection indication and
the initiation of a new connection request. A
value of -1 indicates that a connection retry
should not be attempted after a failed attempt."
::= { ntnQosConfig 3 }
ntnQosConfigAllowPacketReordering OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Support for certain Per-Hop-Behaviors (PHBs)
requires that packets within a flow not be
reordered upon transmission. Packet reordering
may not be an issue for other PHBs. Setting
this object to 'true(1)' allows full flexibility
in terms of the egress queue to which a packet
is assigned. A value of 'false(2)' causes the
agent to verify that in-profile and out-of-profile
actions associated with a flow will not cause
packets from the same flow to be assigned to
different egress queues."
DEFVAL { true }
::= { ntnQosConfig 4 }
ntnQosConfigMaintainPolicingStats OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policing statistics, such as in-profile and
out-of-profile octets, are often an important
mechanism for evaluating the effectiveness of
installed policies. In order to track these
statistics, additional system resources are
consumed meaning that the amount of filters
available for classification purposes is
limited. Setting this object to 'true(1)'
causes statistics to be tracked by default
for all metered policies defined after
this attribute is set. A value of 'false(2)'
means that new metered policies will not track
statistics.
Note that this attribute specifies the default
behavior. Statistics maintenance may be enabled
and disabled on a per policy basis via an
attribute in the ntnQosTargetStatsTable. If
a value for that attribute is not provided, the
value of this object determines the behavior."
DEFVAL { true }
::= { ntnQosConfig 5 }
ntnQosConfigIfcClassRestrictions OBJECT-TYPE
SYNTAX INTEGER {
unrestrictedOnly(1),
unrestrictedAndTrusted(2),
allowAllIfcClasses(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies which interface class types can be
defined by the user. Default filters are installed
to support the different interface classes.
Limiting the classes that can be used reduces,
or eliminates entirely, the default filter
resources that must be consumed, making these
resources available for administrator use.
Modifications to this attribute require a system
initialization before they take effect."
DEFVAL { allowAllIfcClasses }
::= { ntnQosConfig 6 }
ntnQosConfigDefaultOutOfProfileAction OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute identifies the action that is to be
initiated for flows that are determined to be
out-of-profile and are being metered using the
'committedRestricted' type of meter.
Actions must be defined in the qosActionTable prior to
being referenced by this attribute. The value of this
attribute may not be changed while meters of this type
are currently associated with a policy."
::= { ntnQosConfig 7 }
ntnQosConfigPolicyCfgRestrictionMode OBJECT-TYPE
SYNTAX INTEGER {
noPolicyRestrictions(1),
l3PolicyRestrictions(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether policies referencing IP filter
criteria can be defined by the user. The value of
this attribute determines if new IP filter-based
policies can be installed. If the value of this
attribute is 'noPolicyRestrictions(1)', both IP
and Layer 2-based policies can be installed. If
the value is 'l3PolicyRestrictions(2)', only
Layer 2-based policies can be installed.
This attribute is only consulted when traffic
separation mode is enabled.
Modification of this attribute may be restricted
based on the interface used (e.g., CLI) for the
modification."
::= { ntnQosConfig 8 }
--
-- Nortel QoS Policy Interface Identification Objects
--
-- The Nortel QoS Policy Interface Identification Table
-- supports associating an interface with a specific role
-- combination.
--
ntnQosInterfaceIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtnQosInterfaceIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains interface index to interface role
combination associations."
::= { ntnQosIfParametersExt 4 }
ntnQosInterfaceIdEntry OBJECT-TYPE
SYNTAX NtnQosInterfaceIdEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ntnQosInterfaceIdTable.
Each row identifies an interface value that
corresponds to an entry in the ifTable (MIB-II)
and a role combination taglist with which the
interface is associated."
INDEX { ntnQosInterfaceIdIfIndex }
::= { ntnQosInterfaceIdTable 1 }
NtnQosInterfaceIdEntry ::= SEQUENCE {
ntnQosInterfaceIdIfIndex InterfaceIndex,
ntnQosInterfaceIdRoleCombination RoleCombination,
ntnQosInterfaceIdStorageType StorageType,
ntnQosInterfaceIdStatus RowStatus,
ntnQosInterfaceIdQueueSet PolicyInstanceId
}
ntnQosInterfaceIdIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ifIndex value that is associated with this
instance of the ntnQosInterfaceIdEntry. The ifIndex
value of this attribute must correspond to the
ifTable entry with the same ifIndex value."
::= { ntnQosInterfaceIdEntry 1 }
ntnQosInterfaceIdRoleCombination OBJECT-TYPE
SYNTAX RoleCombination
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The role combination that is associated with the
interface with an ifIndex value that is equal to
ntnQosInterfaceIdIfIndex."
::= { ntnQosInterfaceIdEntry 2 }
ntnQosInterfaceIdStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The storage type for this conceptual row.
Conceptual rows having the value permanent(4) need not
allow write-access to any columnar objects in the row.
This object may not be modified if the associated
ntnQosInterfaceIdStatus object is equal to active(1)."
DEFVAL { volatile }
::= { ntnQosInterfaceIdEntry 3 }
ntnQosInterfaceIdStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Row
creation using only default values is supported."
::= { ntnQosInterfaceIdEntry 4 }
ntnQosInterfaceIdQueueSet OBJECT-TYPE
SYNTAX PolicyInstanceId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The queue set associated with this interface. A
queue set must be defined in the qosInterfaceQueueTable
prior to being referenced by this attribute."
::= { ntnQosInterfaceIdEntry 5 }
--
-- Nortel Networks QoS Policy Statistics Auxiliary Objects
--
-- The Target Statistics Group objects supplement the data
-- maintained in the QOS-POLICY-IP-PIB qosTargetTable. The
-- statistics contained in this table are used for monitoring
-- purposes. Devices with limited resources may not support
-- this optional table.
--
ntnQosTargetStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF NtnQosTargetStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Contains items that supplement the target group
data that is specified in the qosTargetTable."
::= { ntnQosStatistics 1 }
ntnQosTargetStatsEntry OBJECT-TYPE
SYNTAX NtnQosTargetStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the ntnQosTargetStatsTable.
Each row contains statistics related to the
associated qosTargetTable entry.
Entries will be automatically deleted from this
table should the corresponding qosTargetTable
entry be destroyed."
AUGMENTS { qosTargetEntry }
::= { ntnQosTargetStatsTable 1 }
NtnQosTargetStatsEntry ::= SEQUENCE {
ntnQosTargetStatsPktHits Counter32,
ntnQosTargetStatsOverflowPktHits Counter32,
ntnQosTargetStatsHCPktHits Counter64,
ntnQosTargetStatsTotalOctets Counter32,
ntnQosTargetStatsTotalOverflowOctets Counter32,
ntnQosTargetStatsTotalHCOctets Counter64,
ntnQosTargetStatsInProfOctets Counter32,
ntnQosTargetStatsInProfOverflowOctets Counter32,
ntnQosTargetStatsInProfHCOctets Counter64,
ntnQosTargetStatsOutProfOctets Counter32,
ntnQosTargetStatsOutProfOverflowOctets Counter32,
ntnQosTargetStatsOutProfHCOctets Counter64,
ntnQosTargetStatsTrackStatistics TruthValue,
ntnQosTargetStatsShapingQDrops Counter32,
ntnQosTargetStatsOverflowShapingQDrops Counter32,
ntnQosTargetStatsHCShapingQDrops Counter64
}
ntnQosTargetStatsPktHits OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the packet hits of this target
group specification. Packet hits are defined as
packets that are selected for additional processing
based on target data specified in the associated
qosTargetTable entry."
::= { ntnQosTargetStatsEntry 1 }
ntnQosTargetStatsOverflowPktHits OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated
ntnQosTargetStatsPktHits counter
has overflowed."
::= { ntnQosTargetStatsEntry 2 }
ntnQosTargetStatsHCPktHits OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the packet hits of this target
group specification. Packet hits are defined as
packets that are selected for additional processing
based on target data specified in the associated
qosTargetTable entry."
::= { ntnQosTargetStatsEntry 3 }
ntnQosTargetStatsTotalOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the total number of octets
associated with packet hits of this target group
specification."
::= { ntnQosTargetStatsEntry 4 }
ntnQosTargetStatsTotalOverflowOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated
ntnQosTargetStatsTotalOctets counter
has overflowed."
::= { ntnQosTargetStatsEntry 5 }
ntnQosTargetStatsTotalHCOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the total number of octets
associated with packet hits of this target group
specification."
::= { ntnQosTargetStatsEntry 6 }
ntnQosTargetStatsInProfOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the total number of octets
associated with packets considered to be in-profile
based on the metering specification associated
with this target group entry."
::= { ntnQosTargetStatsEntry 7 }
ntnQosTargetStatsInProfOverflowOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated
ntnQosTargetStatsInProfOctets counter
has overflowed."
::= { ntnQosTargetStatsEntry 8 }
ntnQosTargetStatsInProfHCOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the total number of octets
associated with packets considered to be in-profile
based on the metering specification associated
with this target group entry."
::= { ntnQosTargetStatsEntry 9 }
ntnQosTargetStatsOutProfOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the total number of octets
associated with packets considered to be out-of-
profile based on the metering specification
associated with this target group entry."
::= { ntnQosTargetStatsEntry 10 }
ntnQosTargetStatsOutProfOverflowOctets OBJECT-TYPE
SYNTAX Counter32
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated
ntnQosTargetStatsOutProfOctets counter
has overflowed."
::= { ntnQosTargetStatsEntry 11 }
ntnQosTargetStatsOutProfHCOctets OBJECT-TYPE
SYNTAX Counter64
UNITS "octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tracks the total number of octets
associated with packets considered to be out-of-
profile based on the metering specification
associated with this target group entry."
::= { ntnQosTargetStatsEntry 12 }
ntnQosTargetStatsTrackStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Policing statistics, such as in-profile and
out-of-profile octets, are often an important
mechanism for evaluating the effectiveness of
installed policies. In order to track these
statistics, additional system resources are
consumed meaning that the amount of filters
available for classification purposes is
limited. Setting this object to 'true(1)'
causes statistics to be tracked for the
metered policy being defined. A value of
'false(2)' means that the metered policy
will not track statistics."
::= { ntnQosTargetStatsEntry 13 }
ntnQosTargetStatsShapingQDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object counts the number of packets dropped due to
insufficient shaping resources. Traffic that is being
shaped prior to transmission may need to be buffered
temporarily to ensure conformance to the associated shaping
specification. Shaping buffer resources are limited. If
shaping buffer resources are exhausted, traffic that is
to be shaped will be dropped, causing this counter to be
incremented once per dropped packet, until resources
become available."
::= { ntnQosTargetStatsEntry 14 }
ntnQosTargetStatsOverflowShapingQDrops OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the associated
ntnQosTargetStatsShapingQDrops counter
has overflowed."
::= { ntnQosTargetStatsEntry 15 }
ntnQosTargetStatsHCShapingQDrops OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object counts the number of packets dropped due to
insufficient shaping resources. Traffic that is being
shaped prior to transmission may need to be buffered
temporarily to ensure conformance to the associated shaping
specification. Shaping buffer resources are limited. If
shaping buffer resources are exhausted, traffic that is
to be shaped will be dropped, causing this counter to be
incremented once per dropped packet, until resources
become available."
::= { ntnQosTargetStatsEntry 16 }
--
-- Conformance Section
--
ntnQosCompliances
OBJECT IDENTIFIER ::= { ntnQosPolicyAuxConformance 1 }
ntnQosGroups
OBJECT IDENTIFIER ::= { ntnQosPolicyAuxConformance 2 }
ntnQosCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for conformance to the
Nortel Networks QoS Policy MIB."
MODULE -- this module
MANDATORY-GROUPS { ntnQosConfigGroup,
ntnQosInterfaceIdGroup }
OBJECT ntnQosConfigDynamicMgmt
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosConfigQpaState
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosConfigQpaRetryTimer
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosConfigAllowPacketReordering
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosConfigMaintainPolicingStats
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosConfigIfcClassRestrictions
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosConfigDefaultOutOfProfileAction
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosConfigPolicyCfgRestrictionMode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosInterfaceIdRoleCombination
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosInterfaceIdStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required, nor is
support for the nonVolatile(2) enumeration."
OBJECT ntnQosInterfaceIdStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT ntnQosInterfaceIdQueueSet
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
GROUP ntnQosTargetStatsGroup
DESCRIPTION
"The ntnQosTargetStatsGroup is optional."
OBJECT ntnQosTargetStatsTrackStatistics
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { ntnQosCompliances 1 }
ntnQosConfigGroup OBJECT-GROUP
OBJECTS {
ntnQosConfigDynamicMgmt,
ntnQosConfigQpaState,
ntnQosConfigQpaRetryTimer,
ntnQosConfigAllowPacketReordering,
ntnQosConfigMaintainPolicingStats,
ntnQosConfigIfcClassRestrictions,
ntnQosConfigDefaultOutOfProfileAction,
ntnQosConfigPolicyCfgRestrictionMode
}
STATUS current
DESCRIPTION
"Objects used to configure QoS Policy Agent
operation."
::= { ntnQosGroups 1 }
ntnQosInterfaceIdGroup OBJECT-GROUP
OBJECTS {
ntnQosInterfaceIdRoleCombination,
ntnQosInterfaceIdStorageType,
ntnQosInterfaceIdStatus,
ntnQosInterfaceIdQueueSet
}
STATUS current
DESCRIPTION
"Objects used to define interface (ifIndex)
to interface role combination mappings."
::= { ntnQosGroups 2 }
ntnQosTargetStatsGroup OBJECT-GROUP
OBJECTS {
ntnQosTargetStatsPktHits,
ntnQosTargetStatsOverflowPktHits,
ntnQosTargetStatsHCPktHits,
ntnQosTargetStatsTotalOctets,
ntnQosTargetStatsTotalOverflowOctets,
ntnQosTargetStatsTotalHCOctets,
ntnQosTargetStatsInProfOctets,
ntnQosTargetStatsInProfOverflowOctets,
ntnQosTargetStatsInProfHCOctets,
ntnQosTargetStatsOutProfOctets,
ntnQosTargetStatsOutProfOverflowOctets,
ntnQosTargetStatsOutProfHCOctets,
ntnQosTargetStatsTrackStatistics,
ntnQosTargetStatsShapingQDrops,
ntnQosTargetStatsOverflowShapingQDrops,
ntnQosTargetStatsHCShapingQDrops
}
STATUS current
DESCRIPTION
"Objects that supplement the qosTargetTable
providing per target statistics."
::= { ntnQosGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink