MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/MSDP-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

814 lines
26 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- MSDP-MIB.my: MSDP MIB file
--
-- April 2000, Rajiv Raghunarayan
--
-- Copyright (c) 1999-2000 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
-- This mib was extracted from draft-ietf-msdp-mib-03.txt
DRAFT-MSDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
experimental, Counter32, Gauge32, IpAddress, TimeTicks
FROM SNMPv2-SMI
RowStatus, TruthValue
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF;
msdpMIB MODULE-IDENTITY
LAST-UPDATED "9912160000Z"
ORGANIZATION "IETF MSDP Working Group"
CONTACT-INFO
" Bill Fenner
75 Willow Road
Menlo Park, CA 94025
Phone: +1 650 867 6073
E-mail: fenner@research.att.com
Dave Thaler
One Microsoft Way
Redmond, WA 98052
Phone: +1 425 703 8835
Email: dthaler@microsoft.com"
DESCRIPTION
"An experimental MIB module for MSDP Management."
::= { experimental 92 }
msdpMIBobjects OBJECT IDENTIFIER ::= { msdpMIB 1 }
msdp OBJECT IDENTIFIER ::= { msdpMIBobjects 1 }
msdpEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The state of MSDP on this MSDP speaker - globally
enabled or disabled."
::= { msdp 1 }
msdpCacheLifetime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The lifetime given to SA cache entries when created
or refreshed. A value of 0 means no SA caching is
done by this MSDP speaker."
::= { msdp 2 }
msdpNumSACacheEntries OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of entries in the SA Cache table."
::= { msdp 3 }
msdpSAHoldDownPeriod OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of seconds in the MSDP SA Hold-down
period"
DEFVAL { 90 }
::= { msdp 9 } -- XXX todo: create group for scalars
---
--- The MSDP Requests table
---
msdpRequestsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpRequestsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing group ranges and MSDP
peers used when deciding where to send an SA Request
message when required. If SA Caching is enabled, this
table may be empty."
::= { msdp 4 }
msdpRequestsEntry OBJECT-TYPE
SYNTAX MsdpRequestsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing a group range
used when deciding where to send an SA Request
message."
INDEX { msdpRequestsGroupAddress, msdpRequestsGroupMask }
::= { msdpRequestsTable 1 }
MsdpRequestsEntry ::= SEQUENCE {
msdpRequestsGroupAddress IpAddress,
msdpRequestsGroupMask IpAddress,
msdpRequestsPeer IpAddress,
msdpRequestsStatus RowStatus
}
msdpRequestsGroupAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address that, when combined with the mask
in this entry, represents the group range for which
this peer will service MSDP SA Requests."
::= { msdpRequestsEntry 1 }
msdpRequestsGroupMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask that, when combined with the group address
in this entry, represents the group range for which
this peer will service MSDP SA Requests."
::= { msdpRequestsEntry 2 }
msdpRequestsPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The peer to which MSDP SA Requests for groups
matching this entry's group range will be sent. Must
match the INDEX of a row in the msdpPeerTable."
::= { msdpRequestsEntry 3 }
msdpRequestsStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this row, by which new rows may be
added to the table."
::= { msdpRequestsEntry 4 }
---
--- The MSDP Peer table
---
msdpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP speaker's
peers."
::= { msdp 5 }
msdpPeerEntry OBJECT-TYPE
SYNTAX MsdpPeerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP peer."
INDEX { msdpPeerRemoteAddress }
::= { msdpPeerTable 1 }
MsdpPeerEntry ::= SEQUENCE {
msdpPeerRemoteAddress IpAddress, -- index
msdpPeerState INTEGER, -- read-only objects:
msdpPeerRPFFailures Counter32,
msdpPeerInSAs Counter32,
msdpPeerOutSAs Counter32,
msdpPeerInSARequests Counter32,
msdpPeerOutSARequests Counter32,
msdpPeerInSAResponses Counter32,
msdpPeerOutSAResponses Counter32,
msdpPeerInControlMessages Counter32,
msdpPeerOutControlMessages Counter32,
msdpPeerInDataPackets Counter32,
msdpPeerOutDataPackets Counter32,
msdpPeerFsmEstablishedTransitions Counter32,
msdpPeerFsmEstablishedTime Gauge32,
msdpPeerInMessageElapsedTime Gauge32,
msdpPeerLocalAddress IpAddress, -- configuration objects:
msdpPeerSAAdvPeriod INTEGER,
msdpPeerConnectRetryInterval INTEGER,
msdpPeerHoldTimeConfigured INTEGER,
msdpPeerKeepAliveConfigured INTEGER,
msdpPeerDataTtl INTEGER,
msdpPeerProcessRequestsFrom TruthValue,
msdpPeerStatus RowStatus,
msdpPeerRemotePort INTEGER, -- back to read-only:
msdpPeerLocalPort INTEGER,
msdpPeerEncapsulationState INTEGER,
msdpPeerEncapsulationType INTEGER,
msdpPeerConnectionAttempts Counter32,
msdpPeerInNotifications Counter32,
msdpPeerOutNotifications Counter32,
msdpPeerLastError OCTET STRING
}
msdpPeerRemoteAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the remote MSDP peer."
::= { msdpPeerEntry 1 }
msdpPeerState OBJECT-TYPE
SYNTAX INTEGER { inactive(1),
listen(2),
connecting(3),
established(4),
disabled(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the MSDP TCP connection with this peer."
::= { msdpPeerEntry 3 }
msdpPeerRPFFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RPF failures on SA messages received
from this peer."
::= { msdpPeerEntry 4 }
msdpPeerInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received on this
connection. This object should be initialized to zero
when the connection is established."
::= { msdpPeerEntry 5 }
msdpPeerOutSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages transmitted on this
connection. This object should be initialized to zero
when the connection is established."
::= { msdpPeerEntry 6 }
msdpPeerInSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages received on
this connection. This object should be initialized to
zero when the connection is established."
::= { msdpPeerEntry 7 }
msdpPeerOutSARequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Request messages transmitted on
this connection. This object should be initialized to
zero when the connection is established."
::= { msdpPeerEntry 8 }
msdpPeerInSAResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA-Response messages received on
this connection. This object should be initialized to
zero when the connection is established."
::= { msdpPeerEntry 9 }
msdpPeerOutSAResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA Response messages transmitted
on this TCP connection. This object should be
initialized to zero when the connection is
established."
::= { msdpPeerEntry 10 }
msdpPeerInControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages received on this
TCP connection. This object should be initialized to
zero when the connection is established."
::= { msdpPeerEntry 11 }
msdpPeerOutControlMessages OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of MSDP messages transmitted on this
TCP connection. This object should be initialized to
zero when the connection is established."
::= { msdpPeerEntry 12 }
msdpPeerInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets
received from this peer. This object should be
initialized to zero when the connection is
established."
::= { msdpPeerEntry 13 }
msdpPeerOutDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of encapsulated data packets sent to
this peer. This object should be initialized to zero
when the connection is established."
::= { msdpPeerEntry 14 }
msdpPeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of times the MSDP FSM transitioned
into the established state."
::= { msdpPeerEntry 15 }
msdpPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This timer indicates how long (in seconds) this peer
has been in the Established state or how long since
this peer was last in the Established state. It is
set to zero when a new peer is configured or the MSDP
speaker is booted."
::= { msdpPeerEntry 16 }
msdpPeerInMessageElapsedTime OBJECT-TYPE
SYNTAX Gauge32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed time in seconds since the last MSDP message
was received from the peer. Each time
msdpPeerInControlMessages is incremented, the value of
this object is set to zero (0)."
::= { msdpPeerEntry 17 }
msdpPeerLocalAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The local IP address of this entry's MSDP
connection."
::= { msdpPeerEntry 18 }
msdpPeerSAAdvPeriod OBJECT-TYPE
SYNTAX INTEGER(1..2147483647)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the
MinSAAdvertisementInterval MSDP timer."
DEFVAL { 60 }
::= { msdpPeerEntry 19 }
msdpPeerConnectRetryInterval OBJECT-TYPE
SYNTAX INTEGER (1..65535)
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the ConnectRetry timer."
DEFVAL { 120 }
::= { msdpPeerEntry 20 }
msdpPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX INTEGER ( 0 | 3..65535 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the Hold Timer
configured for this MSDP speaker with this peer."
DEFVAL { 90 }
::= { msdpPeerEntry 21 }
msdpPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX INTEGER ( 0 | 1..21845 )
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Time interval in seconds for the KeepAlive timer
configured for this MSDP speaker with this peer. A
reasonable maximum value for this timer would be
configured to be one third of that of
msdpPeerHoldTimeConfigured. If the value of this
object is zero (0), no periodic KEEPALIVE messages are
sent to the peer after the MSDP connection has been
established."
DEFVAL { 30 }
::= { msdpPeerEntry 22 }
msdpPeerDataTtl OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The minimum TTL a packet is required to have before
it may be forwarded using SA encapsulation to this
peer."
::= { msdpPeerEntry 23 }
msdpPeerProcessRequestsFrom OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates whether or not to process MSDP
SA Request messages from this peer. If True(1), MSDP
SA Request messages from this peer are processed and
replied to (if appropriate) with SA Response messages.
If False(2), MSDP SA Request messages from this peer
are silently ignored. It defaults to False when
msdpCacheLifetime is 0 and True when msdpCacheLifetime
is non-0."
::= { msdpPeerEntry 24 }
msdpPeerStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
Start Event to be generated. A transition out of the
'active' state will cause the MSDP Stop Event to be
generated. Care should be used in providing write
access to this object without adequate
authentication."
::= { msdpPeerEntry 25 }
msdpPeerRemotePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remote port for the TCP connection between the
MSDP peers."
::= { msdpPeerEntry 26 }
msdpPeerLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The local port for the TCP connection between the
MSDP peers."
::= { msdpPeerEntry 27 }
msdpPeerEncapsulationState OBJECT-TYPE
SYNTAX INTEGER { default(1),
received(2),
advertising(3),
sent(4),
agreed(5),
failed(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the encapsulation negotiation state
machine."
::= { msdpPeerEntry 28 }
msdpPeerEncapsulationType OBJECT-TYPE
SYNTAX INTEGER { tcp(1),
udp(2),
gre(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The encapsulation in use when encapsulating data in
SA messages to this peer."
::= { msdpPeerEntry 29 }
msdpPeerConnectionAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the state machine has
transitioned from inactive to connecting."
::= { msdpPeerEntry 30 }
msdpPeerInNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP Notification messages received on
this connection. This object should be initialized to
zero when the connection is established."
::= { msdpPeerEntry 31 }
msdpPeerOutNotifications OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP Notification messages transmitted
on this connection. This object should be initialized
to zero when the connection is established."
::= { msdpPeerEntry 32 }
msdpPeerLastError OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last error code and subcode seen by this peer on
this connection. If no error has occurred, this field
is zero. Otherwise, the first byte of this two byte
OCTET STRING contains the error code, and the second
byte contains the subcode."
DEFVAL { '0000'h }
::= { msdpPeerEntry 33 }
---
--- The MSDP Source-Active Cache table
---
msdpSACacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table listing the MSDP SA
advertisements currently in the MSDP speaker's cache."
::= { msdp 6 }
msdpSACacheEntry OBJECT-TYPE
SYNTAX MsdpSACacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) representing an MSDP SA
advert."
INDEX { msdpSACacheGroupAddr, msdpSACacheSourceAddr,
msdpSACacheOriginRP }
::= { msdpSACacheTable 1 }
MsdpSACacheEntry ::= SEQUENCE {
msdpSACacheGroupAddr IpAddress,
msdpSACacheSourceAddr IpAddress,
msdpSACacheOriginRP IpAddress,
msdpSACachePeerLearnedFrom IpAddress,
msdpSACacheRPFPeer IpAddress,
msdpSACacheInSAs Counter32,
msdpSACacheInDataPackets Counter32,
msdpSACacheUpTime TimeTicks,
msdpSACacheExpiryTime TimeTicks,
msdpSACacheStatus RowStatus
}
msdpSACacheGroupAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The group address of the SA Cache entry."
::= { msdpSACacheEntry 1 }
msdpSACacheSourceAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The source address of the SA Cache entry."
::= { msdpSACacheEntry 2 }
msdpSACacheOriginRP OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address of the RP which originated the last SA
message accepted for this entry."
::= { msdpSACacheEntry 3 }
msdpSACachePeerLearnedFrom OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which this SA Cache entry was last
accepted. This address must correspond to the
msdpPeerRemoteAddress value for a row in the MSDP Peer
Table."
::= { msdpSACacheEntry 4 }
msdpSACacheRPFPeer OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The peer from which an SA message corresponding to
this cache entry would be accepted (i.e. the RPF peer
for msdpSACacheOriginRP). This may be different than
msdpSACachePeerLearnedFrom if this entry was created
by an MSDP SA-Response. This address must correspond
to the msdpPeerRemoteAddress value for a row in the
MSDP Peer Table."
::= { msdpSACacheEntry 5 }
msdpSACacheInSAs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP SA messages received relevant to
this cache entry. This object must be initialized to
zero when creating a cache entry."
::= { msdpSACacheEntry 6 }
msdpSACacheInDataPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MSDP encapsulated data packets received
relevant to this cache entry. This object must be
initialized to zero when creating a cache entry."
::= { msdpSACacheEntry 7 }
msdpSACacheUpTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time since this entry was placed in the SA
cache."
::= { msdpSACacheEntry 8 }
msdpSACacheExpiryTime OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time remaining before this entry will expire from
the SA cache."
::= { msdpSACacheEntry 9 }
msdpSACacheStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The status of this row in the table. The only
allowable actions are to retreive the status, which
will be `active', or to set the status to `destroy' in
order to remove this entry from the cache."
::= { msdpSACacheEntry 10 }
-- Traps
msdpTraps OBJECT IDENTIFIER ::= { msdp 7 }
msdpEstablished NOTIFICATION-TYPE
OBJECTS { msdpPeerFsmEstablishedTransitions }
STATUS current
DESCRIPTION
"The MSDP Established event is generated when the MSDP
FSM enters the ESTABLISHED state."
::= { msdpTraps 1 }
msdpBackwardTransition NOTIFICATION-TYPE
OBJECTS { msdpPeerState }
STATUS current
DESCRIPTION
"The MSDPBackwardTransition Event is generated when
the MSDP FSM moves from a higher numbered state to a
lower numbered state."
::= { msdpTraps 2 }
-- conformance information
msdpMIBConformance OBJECT IDENTIFIER ::= { msdp 8 }
msdpMIBCompliances OBJECT IDENTIFIER ::= { msdpMIBConformance 1 }
msdpMIBGroups OBJECT IDENTIFIER ::= { msdpMIBConformance 2 }
-- compliance statements
msdpMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement
the MSDP MIB."
MODULE -- this module
MANDATORY-GROUPS { msdpMIBGlobalsGroup }
GROUP msdpSACacheGroup
DESCRIPTION
"This group is mandatory if the MSDP speaker has
the ability to cache SA messages."
::= { msdpMIBCompliances 1 }
-- units of conformance
msdpMIBGlobalsGroup OBJECT-GROUP
OBJECTS { msdpEnabled }
STATUS current
DESCRIPTION
"A collection of objects providing information on
global MSDP state."
::= { msdpMIBGroups 1 }
msdpMIBPeerGroup OBJECT-GROUP
OBJECTS { msdpPeerRPFFailures,
msdpPeerState, msdpPeerInSAs, msdpPeerOutSAs,
msdpPeerInSARequests, msdpPeerOutSARequests,
msdpPeerInSAResponses, msdpPeerOutSAResponses,
msdpPeerInNotifications, msdpPeerOutNotifications,
msdpPeerInControlMessages, msdpPeerOutControlMessages,
msdpPeerInDataPackets, msdpPeerOutDataPackets,
msdpPeerFsmEstablishedTransitions,
msdpPeerFsmEstablishedTime,
msdpPeerLocalAddress,
msdpPeerRemotePort, msdpPeerLocalPort,
msdpPeerSAAdvPeriod,
msdpPeerConnectRetryInterval,
msdpPeerHoldTimeConfigured,
msdpPeerKeepAliveConfigured,
msdpPeerInMessageElapsedTime,
msdpPeerDataTtl,
msdpPeerProcessRequestsFrom,
msdpPeerEncapsulationState, msdpPeerEncapsulationType,
msdpPeerConnectionAttempts,
msdpPeerLastError,
msdpPeerStatus
}
STATUS current
DESCRIPTION
"A collection of objects for managing MSDP peers."
::= { msdpMIBGroups 2 }
msdpSACacheGroup OBJECT-GROUP
OBJECTS { msdpCacheLifetime, msdpNumSACacheEntries,
msdpSAHoldDownPeriod,
msdpSACachePeerLearnedFrom,
msdpSACacheRPFPeer, msdpSACacheInSAs,
msdpSACacheInDataPackets,
msdpSACacheUpTime, msdpSACacheExpiryTime,
msdpSACacheStatus }
STATUS current
DESCRIPTION
"A collection of objects for managing MSDP SA cache
entries."
::= { msdpMIBGroups 3 }
--msdpNotificationGroup NOTIFICATION-GROUP
-- NOTIFICATIONS { msdpEstablished,
-- msdpBackwardTransition }
-- STATUS current
-- DESCRIPTION
-- "A collection of notifications for signaling changes
-- in MSDP peer relationships."
-- ::= { msdpMIBGroups 4 }
--msdpRequestsGroup OBJECT-GROUP
-- OBJECTS { msdpRequestsPeer, msdpRequestsStatus }
-- STATUS current
-- DESCRIPTION
-- "A collection of objects for managing MSDP Request
-- transmission."
-- ::= { msdpMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink