MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/MPOA-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

4267 lines
162 KiB
Plaintext
Raw Blame History

-- **************************************************************************
-- MPOA-MIB specified by ATM Forum
-- Srikanth Kilaru (skilaru@cisco.com) Aug 18 1999
-- Copyright (c) 1995-1997, 1998, 1999 by cisco Systems, Inc.
-- All rights reserved.
-- **************************************************************************
MPOA-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
enterprises, Counter32, Counter64, Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
MacAddress, TimeInterval, TimeStamp, TruthValue, RowStatus
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
lecIndex
FROM LAN-EMULATION-CLIENT-MIB
-- AtmAddr
-- FROM ATM-TC-MIB
;
mpoaMIB MODULE-IDENTITY
LAST-UPDATED "9811090000Z"
ORGANIZATION "ATM Forum LANE/MPOA Working Group"
CONTACT-INFO
"The ATM Forum
2570 West El Camino Real, Suite 304
Mountain View, CA 94040-1313
USA
Tel: +1-650-949-6700
Fax: +1-650-949-6705
Web: http://www.atmforum.com
E-mail: info@atmforum.com"
DESCRIPTION
"This module defines a portion of the management
information base (MIB) for managing Multiprotocol Over
ATM clients and servers which was revised based
on MPOA Errata contained in MPOA v1.1.
The difference between af-mpoa-0092.000 and this
version is the mpcMpsMacAddressTable has been
obsoleted. The mpcMpsMultipleMacAddressTable
has been added. The mpcMpsMultipleMacAddressTable
replaces the mpcMpsMacAddressTable."
REVISION "9811090000Z"
DESCRIPTION
"MPOA v 1.1, Nov 9, 1998
Version of the MIB module MPOA-MIB
that is contained in the MPOA v1.1 document.
The difference between af-mpoa-0092.000 and this
version is the mpcMpsMacAddressTable has been
obsoleted. The mpcMpsMultipleMacAddressTable
has been added. The mpcMpsMultipleMacAddressTable
replaces the mpcMpsMacAddressTable."
REVISION "9805220000Z"
DESCRIPTION
"Final Ballot Version, May 22, 1998
Version of the MIB module MPOA-MIB
that is in: AF-MPOA-0092.000."
REVISION "9802250000Z"
DESCRIPTION
"Straw Ballot Revision 1.0, February 25, 1998
Version of the MIB module MPOA-MIB
that is in STR-MPOA-MIB-01.01."
::= { atmfMpoa 1 }
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
atmForumNetworkManagement OBJECT IDENTIFIER ::= { atmForum 5 }
atmfMpoa OBJECT IDENTIFIER ::= { atmForumNetworkManagement 8 }
--
-- Textual Conventions
--
AtmAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity.
The address types are: no address (0 octets),
E.164 (8 octets), and NSAP (20 octets).
Note: The E.164 address is encoded in BCD
format."
SYNTAX OCTET STRING (SIZE(0|8|20))
LecIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of this object identifies the LEC
for which the entry contains management
information. The value of this object for
a particular LAN Emulation Client (LEC) has
the same value as the lecIndex object, defined
in the LAN-EMULATION-CLIENT MIB, for the same LEC."
SYNTAX INTEGER (1..2147483647)
AtmConfigAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The ATM address used by the network entity.
The address types are: NSAP SEL Byte (1 octet)
E.164 (8 octets), and NSAP (20 octets).
Note: If the 1 octet NSAP SEL is given, the
other 19 octets of the NSAP are derived
from the system either through ILMI or another method.
Note: The E.164 address is encoded in BCD format."
SYNTAX OCTET STRING (SIZE(1|8|20))
InternetworkAddrType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Internetwork Layer Address Types.
Values are defined in Assigned Numbers,
RFC1700. Note: not all of these values make sense in all
contexts where this type is used in this MIB, but they are
included for completeness."
REFERENCE
"Assigned Numbers, RFC1700, ADDRESS FAMILY NUMBERS"
SYNTAX INTEGER {
other(0),
ipV4(1),
ipV6(2),
nsap(3),
hdlc(4),
bbn1822(5),
ieee802(6),
e163(7),
e164(8),
f69(9),
x121(10),
ipx(11),
appleTalk(12),
decnetIV(13),
banyanVines(14),
e164WithNsap(15)
}
InternetworkAddr ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The value of an internetwork layer address."
SYNTAX OCTET STRING (SIZE (0..60))
MpcIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique value, for each MPOA client
which this SNMP agent manages. It is recommended that
values
are assigned contiguously starting from 1. The value for
each MPOA Client must remain constant, even if the MPOA
Client or SNMP agent is re-initialized."
SYNTAX Integer32 (1..2147483647)
MpsIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A unique value, for each MPOA Server
which this SNMP agent manages. It is recommended that
values
are assigned contiguously starting from 1. The value for
each MPOA Server must remain constant, even if the MPOA
Server or SNMP agent is re-initialized."
SYNTAX Integer32 (1..2147483647)
mpoaMIBObjects OBJECT IDENTIFIER ::= { mpoaMIB 1 }
-- This MIB module consists of the following groups:
--
-- (1) MPOA Common Groups
-- (a) Device Type group
-- (b) Device Type Mps Mac group
--
-- (2) MPOA Client Groups
-- (a) Configuration group
-- (b) Actual group
-- (c) Data Atm Address group
-- (d) Statistics group
-- (e) Protocol support group
-- (f) LEC -> MPC Mapping group
-- (g) MPC's MPS Information group
-- (h) MAC Address group
-- (i) Ingress Cache Total Packet group
-- (j) Ingress Cache Total Octet group
-- (k) Ingress Cache group
-- (l) Egress Cache Total Packet group
-- (m) Egress Cache Total Octet group
-- (n) Egress Cache group
--
-- (3) MPOA Server groups
-- (a) Configuration group
-- (b) Actual group
-- (c) Statistics group
-- (d) Protocol support group
-- (e) LEC -> MPS Mapping group
-- (f) Ingress Cache group
-- (g) Egress Cache group
--
-- ------------------------------------------------------------- --
mpoaCommonObjects OBJECT IDENTIFIER ::= { mpoaMIBObjects 1 }
deviceTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DeviceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The device type table
represents the mapping of the Lane Data ATM address
to the MAC device capability.
The unique key is the Lane data ATM address and Lec Index
of the LEC associated with the MAC addresses.
This table contains information which was
gathered from its environment about neighboring
machines.
This Device type table represents the information of
other/remote MPOA devices, discovered/gathered by each MPOA
device. This MIB is not the device type of MPS/MPC
itself; it is DISCOVERED information."
REFERENCE
"Sections: 5.2.3 Device Type TLV, and 4.2 Device Discovery,
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { mpoaCommonObjects 1 }
deviceTypeEntry OBJECT-TYPE
SYNTAX DeviceTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table and corresponding entries in the
deviceTypeMpsMacAddressTable represent a mapping of a MAC device
capability (i.e. the set of MAC addresses from a device) to the
LEC ATM Address."
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
INDEX { deviceTypeIndex }
::= { deviceTypeTable 1 }
DeviceTypeEntry ::= SEQUENCE {
deviceTypeIndex INTEGER,
deviceTypeLecIndex LecIndex,
deviceTypeRemoteLecAtmAddress AtmAddr,
deviceTypeType INTEGER,
deviceTypeMpsAtmAddress AtmAddr,
deviceTypeMpcAtmAddress AtmAddr
}
deviceTypeIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index into this table and also used as one of the indices for
the deviceTypeMpsMacAddressTable. This index has local
significance within the mpoaDeviceGroup.
Entries in the `deviceTypeMpsMacAddressTable' which correspond
to this index, and have the `deviceTypeType' value of `mps' or
`mpsAndMps' are considered to be MPS MAC addresses."
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { deviceTypeEntry 1 }
deviceTypeLecIndex OBJECT-TYPE
SYNTAX LecIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"LecIndex of LEC that supports this
data ATM address"
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { deviceTypeEntry 2 }
deviceTypeRemoteLecAtmAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM address learned by LE ARP."
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { deviceTypeEntry 3 }
deviceTypeType OBJECT-TYPE
SYNTAX INTEGER {
nonMpoa(1),
mps(2),
mpc(3),
mpsAndMpc(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"same as the TLV"
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { deviceTypeEntry 4 }
deviceTypeMpsAtmAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Associated MPS address, zeros for non-MPOA and mpc"
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { deviceTypeEntry 5 }
deviceTypeMpcAtmAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Associated MPC address, zeros for non-MPOA & mps"
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { deviceTypeEntry 6 }
-- The deviceTypeMpsMacAddress Table contains MAC addresses
-- from the device type TLV. If the deviceTypeType was `mpsAndMpc'
-- there must be at least one MPS MAC Address (i.e. at least one entry in
-- this table.) If the deviceTypeType is `mps', there may be zero or more
-- MPS MAC addresses in this table. If the deviceTypeType is `nonMpoa'
-- or `mpc' then there will be no corresponding entries in this table.
-- See Section 5.2.3 of the MPOA Letter Ballot 1.0
deviceTypeMpsMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF DeviceTypeMpsMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains MPS MAC Address information gathered from
the MPOA DeviceTypeTLV."
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { mpoaCommonObjects 2 }
deviceTypeMpsMacAddressEntry OBJECT-TYPE
SYNTAX DeviceTypeMpsMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry represents an MPS MAC Address. Each entry
corresponds to a deviceTypeIndex value for which the
deviceTypeType attribute is `mps' or `mpsAndMpc'."
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
INDEX { deviceTypeIndex,
deviceTypeMpsMacAddress
}
::= { deviceTypeMpsMacAddressTable 1 }
DeviceTypeMpsMacAddressEntry ::=SEQUENCE {
deviceTypeMpsMacAddress MacAddress
}
deviceTypeMpsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPS MAC address contained in the Device Type TLV which
is identified by the deviceTypeIndex in the deviceTypeTable."
REFERENCE
"Section 5.2.3 Device Type TLV
MPOA Version 1.0 (Letter Ballot) AF-MPOA-0087.000"
::= { deviceTypeMpsMacAddressEntry 1 }
--
-- MPOA Client Objects
--
mpcObjects OBJECT IDENTIFIER ::= { mpoaMIBObjects 2 }
--
-- MPOA Client configuration group
--
mpcNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains an appropriate value to
be used for mpcIndex when creating entries in
the mpcConfigTable. The value 0 indicates that
no new rows can be created. Otherwise, it is
recommended that values are assigned contiguously,
starting from 1.
MPC creation by a Manager: To obtain the mpcIndex value
for a new entry, the manager issues a management protocol
retrieval operation to obtain the current value of this
object. If the value retrieved is 0 (zero), the manager
cannot create a row.
After each retrieval of a non-zero value, the manager
should issue a management protocol SET operation using
the value just retrieved. If the SET is successful,
the agent should update the value to the next unassigned
index, or zero if appropriate.
NOTE: the manager may also issue a set on this object
with a value of its own choosing. If the set is successful,
the manager may use this value for the mpcIndex. In this
case, the agent would update the value to the next
unassigned index, or zero if appropriate.
The definition of `next unassigned index' is any
mpcNextIndex value that has not yet been set by a manager,
or reserved by the agent (see next paragraph), since this
agent was last re-initialized.
MPC creation by an Agent: When a row in the
mpcConfigTable is created by an agent, the agent should
reserve the value of the index by updating the value of
this object to the next unassigned index
or zero if appropriate. Thus, a manager will not
be able to set an index reserved by an agent.
In the situation of an agent re-initialization, all currently
used mpcIndexes must be preserved.
In other words, the Agent should store in non-volatile memory
all of the currently used mpcIndexes (along with all necessary
configuration information from the mpcConfigTable). When the
agent is re-initialized, the mpcNextIndex value is
any valid Integer32 value which is not being used
as an mpcIndex, except 0 which maintains its original
definition of indicating that a row cannot be created."
::= { mpcObjects 1 }
mpcConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MPOA Client Configuration Table.
This table contains configuration information
for all MPOA Clients which this agent manages."
::= { mpcObjects 2 }
mpcConfigEntry OBJECT-TYPE
SYNTAX MpcConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPOA Client Configuration Entry.
Each entry contains configuration information
for one MPOA Client. The configuration information, including
the mpcIndex, must be restored after a re-initialization of an
MPC or a re-initialization of the SNMP agent."
INDEX { mpcIndex }
::= { mpcConfigTable 1 }
MpcConfigEntry ::=SEQUENCE {
--
-- Primary config info: Index, mode and control address information
--
mpcIndex MpcIndex,
mpcRowStatus RowStatus,
mpcConfigMode INTEGER,
mpcCtrlAtmAddr AtmConfigAddr,
--
-- MPC parameters which may be obtained from
-- the LECS.
--
mpcSCSetupFrameCount Integer32, -- MPC-p1
mpcSCSetupFrameTime Integer32, -- MPC-p2
-- The Flow-detection Protocols (denoted with MPC-p3)
-- are represented in the mpcProtocolsTable.
mpcInitialRetryTime Integer32, -- MPC-p4
mpcRetryTimeMaximum Integer32, -- MPC-p5
mpcHoldDownTime Integer32 -- MPC-p6
}
mpcIndex OBJECT-TYPE
SYNTAX MpcIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value which uniquely identifies this conceptual
row in the mpcConfigTable. The `mpcNextIndex' object
needs to be used to determine the value of this object.
A row cannot be added, unless the mpcCtrlAtmAddress is unique.
In the event of either an MPC re-initialization or an agent
re-initialization, the value of this mpcIndex must remain the
same. In other words, the row needs to be saved and restored
in the event of an MPC or SNMP Agent re-initialization."
::= { mpcConfigEntry 1 }
mpcRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows creation and deletion of
MPOA Clients.
Within each conceptual mpcConfigTable row, writable objects
may be modified, regardless of the value of mpcRowStatus.
It is not necessary to set a row's status to `notInService'
first.
A row cannot be created, unless the mpcAtmCtrlAddress
in this table is unique.
When an MPOA Client is created via this object,
it will initially have
`mpcActualState' = `initialState'"
::= { mpcConfigEntry 2 }
mpcConfigMode OBJECT-TYPE
SYNTAX INTEGER {
automatic(1),
manual(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether this MPC should auto-configure
the next time it is (re-)initialized.
During the (re-)initialization of this MPC, if
the mode is automatic(1), the LECS is contacted and
requests are made for all MPC-p* parameters.
Otherwise, if the mode is manual(2), the values of the
configuration parameters are obtained from the
mpcConfigTableand the mpcProtocolTable. In other words, when
the MPC is first initialized, it can use the default or
configured values from the mpcConfigTable and
mpcProtocolTable. If the mode is manual (2), no further
action is required. If the mode is automatic (1), then
the LECS should be contacted and all available MPC-p1
to MPC-p6 parameters would be retrieved.
These parameters would then overwrite the existing MPC-p1 to
MPC-p6 parameters. The actual values are reflected in the
mpcActualTable."
DEFVAL { automatic }
::= { mpcConfigEntry 3 }
mpcCtrlAtmAddr OBJECT-TYPE
SYNTAX AtmConfigAddr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MPC's Control ATM Address. There exists one
Control ATM Address per MPC, therefore, the value
of this entry is unique within the table. The control ATM
Address is the address which is used by the MPC in its requests
to the MPS. The value of this object should not change, once
created."
::= { mpcConfigEntry 4 }
mpcSCSetupFrameCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This represents the MPC-p1 Short-cut setup frame count
parameter.
The MPC-p1 value is frames measured over mpcSCFrameTime seconds.
Flow detection is protocol independent. i.e. all network layers
mpcProtocolEntries for this MPC share the flow rate
specification.
A value of 1 causes all flows to initiate resolution/shortcut
process."
DEFVAL { 10 }
::= { mpcConfigEntry 5 }
mpcSCSetupFrameTime OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPC-p2 Short-cut setup frame time, in seconds."
DEFVAL { 1 }
::= { mpcConfigEntry 6 }
mpcInitialRetryTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPC-p4 is the initial value for the retry time out
period used for timing out MPOA Resolution Requests
in seconds. Retry time consists of this initial
time-out (MPC-p4) and a retry multiplier (MPC-c1).
If a response is not received, then another request
is sent with a timeout of `retry time' * MPC-c1
seconds, or until mpcRetryTimeMaximum."
DEFVAL { 5 }
::= { mpcConfigEntry 7 }
mpcRetryTimeMaximum OBJECT-TYPE
SYNTAX Integer32 (10..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPC-p5 cumulative max value for Retry Time (MPC-p4).
Retries are attempted at intervals determined by the
algorithm described in the definition of mpcIntialRetryTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Section 4.3 MPOA Retry Mechanism"
DEFVAL { 40 }
::= { mpcConfigEntry 8 }
mpcHoldDownTime OBJECT-TYPE
SYNTAX Integer32 (30..1200)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPC-p6 Hold Down Time
Minimum time to wait before reinitiating
a failed resolution attempt. Default is
mpcRetryTimeMaximum * 4."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Section 4.1.2.1 MPC Parameters"
DEFVAL { 160 }
::= { mpcConfigEntry 9 }
--
-- MPOA Client Actual group
--
mpcActualTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcActualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPOA Client Actual Table.
A read-only table which contains state
information and reflects the actual values which
these MPOA Clients are using. The actual
values may differ from the configured values.
For example, the mpcConfigMode takes affect
only during (re-)initialization of the MPC.
The MPC-p1 to MPC-p6 parameters may differ
from the configured values because, if the
MPC was (re-)initialized and the mpcConfigMode
was set to automatic (1) then some, perhaps all,
of the MPC-p1 to MPC-p6 parameters were retrieved
from the LECS and the values from the LECS may
differ from the configured/default values of the
mpcConfigTable. NOTE: after re-initialization
a set to an object in the mpcConfigTable which
changes the value of the object will be reflect
in this Table, except for a set to the
mpcConfigMode which takes effect only during
re-initialization."
::= { mpcObjects 3 }
mpcActualEntry OBJECT-TYPE
SYNTAX MpcActualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the MPC Actual Table.
An entry represents a specific MPOA Client's
state information and the actual values
which are being used by the MPOA Client.
For example, the corresponding mpcConfigEntry contains
default and/or configured parameters, if mpcConfigMode was
set to manual, then these are the objects values' which are
reflected for the mpcActualEntry. However, if the
mpcConfigMode is automatic, then the mpcActualEntry
will be all the corresponding mpcConfigEntry's object,
excluding any objects which were retrieved from the LECS.
In other words, the objects retrieved from the LECS during
the (re-)initialization of the MPC overwrite any of the default
and/or configured values.
NOTE: any subsequent `set' to the configured values, e.g. an
SNMP
set operation, which is successful could result in a change to an
mpcConfigTable value, and will be reflected in this table as
well."
AUGMENTS { mpcConfigEntry }
::= { mpcActualTable 1 }
MpcActualEntry ::=SEQUENCE {
mpcActualState INTEGER,
mpcDiscontinuityTime TimeStamp,
--
-- Actual values for the MPCs.
--
mpcActualConfigMode INTEGER,
mpcActualSCSetupFrameCount Integer32, -- MPC-p1
mpcActualSCSetupFrameTime Integer32, -- MPC-p2
-- The flow-detection protocols for MPC-p3 are represented
-- in the mpcProtocolTable. There is no actual counterpart
-- for them.
mpcActualInitialRetryTime Integer32, -- MPC-p4
mpcActualRetryTimeMaximum Integer32, -- MPC-p5
mpcActualHoldDownTime Integer32 -- MPC-p6
}
mpcActualState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
initialState(2),
up(3),
down(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the actual state
of the MPOA Client."
::= { mpcActualEntry 1 }
mpcDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which any one or more of this MPC's counters
experienced a discontinuity. The relevant counters
are the specific instances associated with this
MPC. If discontinuities have not occurred since the
last re-initialization of the local management subsystem,
then this object contains a zero value."
::= { mpcActualEntry 2 }
mpcActualConfigMode OBJECT-TYPE
SYNTAX INTEGER {
automatic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this MPC auto-configured
when it was last (re-)initialized."
::= { mpcActualEntry 3 }
mpcActualSCSetupFrameCount OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPC-p1 Short-cut setup frame count.
In frames measured over mpcShortcutFrameTime seconds.
Flow detection is protocol independent. i.e. all
network layers mpcProtocolEntry share the flow rate
specification.
A value of 1 implies that resolutions for short-cuts
are attempted for all flows."
::= { mpcActualEntry 4 }
mpcActualSCSetupFrameTime OBJECT-TYPE
SYNTAX Integer32 (1..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual MPC-p2 Short-cut setup frame time, in seconds."
::= { mpcActualEntry 5 }
mpcActualInitialRetryTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Actual MPC-p4 is initial value for the
retry time out."
::= { mpcActualEntry 6 }
mpcActualRetryTimeMaximum OBJECT-TYPE
SYNTAX Integer32 (30..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPC-p5 cumulative maximum value for Retry Time (MPC-p4).
Retries are attempted at intervals determined by the
algorithm described in the definition of
mpcActualInitialRetryTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Section 4.3 MPOA Retry Mechanism"
::= { mpcActualEntry 7 }
mpcActualHoldDownTime OBJECT-TYPE
SYNTAX Integer32 (30..1200)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPC-p6 Hold Down Time
Minimum time to wait before reinitiating a failed
resolution attempt. The default value is
mpcRetryTimeMaximum * 4."
::= { mpcActualEntry 8 }
--
-- DataAtmAddresses -> MPC
--
mpcDataAtmAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcDataAtmAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which shows all the data ATM addresses
associated with all MPOA Clients."
::= { mpcObjects 4 }
mpcDataAtmAddressEntry OBJECT-TYPE
SYNTAX MpcDataAtmAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row defines one data ATM address associated with
an MPC. NOTE: if an MPC has more than one data ATM
address then there will be another entry which contains
the same mpcIndex subIdentifier, with a different
mpcDataAtmAddress."
INDEX { mpcIndex,
mpcDataAtmAddress
}
::= { mpcDataAtmAddressTable 1 }
MpcDataAtmAddressEntry ::= SEQUENCE {
mpcDataAtmAddress AtmAddr,
mpcDataAtmAddressRowStatus RowStatus
}
mpcDataAtmAddress OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A data ATM Address which is associated with
an MPOA Client specified by the mpcIndex."
::= { mpcDataAtmAddressEntry 1 }
mpcDataAtmAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows creation and deletion of
an MPOA Client's Data ATM Addresses. The
row can be created/deleted by either an NMS
or by the SNMP agent."
::= { mpcDataAtmAddressEntry 2 }
--
-- MPOA Client statistics group
--
mpcStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read-only table which contains statistical
information for all MPOA Clients that
this agent manages."
::= { mpcObjects 5 }
mpcStatisticsEntry OBJECT-TYPE
SYNTAX MpcStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row in this table contains statistics
for one MPOA Client."
AUGMENTS { mpcConfigEntry }
::= { mpcStatisticsTable 1 }
MpcStatisticsEntry ::=SEQUENCE {
mpcStatTxMpoaResolveRequests Counter32,
mpcStatRxMpoaResolveReplyAcks Counter32,
mpcStatRxMpoaResolveReplyInsufECResources Counter32,
mpcStatRxMpoaResolveReplyInsufSCResources Counter32,
mpcStatRxMpoaResolveReplyInsufEitherResources Counter32,
mpcStatRxMpoaResolveReplyUnsupportedInetProt Counter32,
mpcStatRxMpoaResolveReplyUnsupportedMacEncaps Counter32,
mpcStatRxMpoaResolveReplyUnspecifiedOther Counter32,
mpcStatRxMpoaImpRequests Counter32,
mpcStatTxMpoaImpReplyAcks Counter32,
mpcStatTxMpoaImpReplyInsufECResources Counter32,
mpcStatTxMpoaImpReplyInsufSCResources Counter32,
mpcStatTxMpoaImpReplyInsufEitherResources Counter32,
mpcStatTxMpoaImpReplyUnsupportedInetProt Counter32,
mpcStatTxMpoaImpReplyUnsupportedMacEncaps Counter32,
mpcStatTxMpoaImpReplyUnspecifiedOther Counter32,
mpcStatTxMpoaEgressCachePurgeRequests Counter32,
mpcStatRxMpoaEgressCachePurgeReplies Counter32,
mpcStatRxMpoaKeepAlives Counter32,
mpcStatRxMpoaTriggers Counter32,
mpcStatRxMpoaDataPlanePurges Counter32,
mpcStatTxMpoaDataPlanePurges Counter32,
mpcStatRxNhrpPurgeRequests Counter32,
mpcStatTxNhrpPurgeReplies Counter32,
-- NOTE: since the MPC supersedes the NHC's role,
-- the following counters should be counted here,
-- as opposed to the NHC.
mpcStatRxErrUnrecognizedExtensions Counter32,
mpcStatRxErrLoopDetecteds Counter32,
mpcStatRxErrProtoAddrUnreachables Counter32,
mpcStatRxErrProtoErrors Counter32,
mpcStatRxErrSduSizeExceededs Counter32,
mpcStatRxErrInvalidExtensions Counter32,
mpcStatRxErrInvalidReplies Counter32,
mpcStatRxErrAuthenticationFailures Counter32,
mpcStatRxErrHopCountExceededs Counter32
}
mpcStatTxMpoaResolveRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Requests transmitted
by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 1 }
mpcStatRxMpoaResolveReplyAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of positively acknowledged MPC
Resolved Replies received by this MPC with an MPOA
CIE Code of 0x00 (Success).
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and/or re-
initialization
of the MPC, and at other times, as indicated by the value of
mpcDiscontinuityTime."
REFERENCE "Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 2 }
mpcStatRxMpoaResolveReplyInsufECResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x81, `Insufficient resources to
accept egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 3 }
mpcStatRxMpoaResolveReplyInsufSCResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x82, `Insufficient resources to
accept the shortcut'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 4 }
mpcStatRxMpoaResolveReplyInsufEitherResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x83, `Insufficient resources to
accept either shortcut or egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 5 }
mpcStatRxMpoaResolveReplyUnsupportedInetProt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x84, `Unsupported Internework
Layer protocol'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 6 }
mpcStatRxMpoaResolveReplyUnsupportedMacEncaps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x85, `Unsupported MAC layer encapsulation'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 7 }
mpcStatRxMpoaResolveReplyUnspecifiedOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x88, `Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 8 }
mpcStatRxMpoaImpRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Requests received
by this MPC.
Discontinuities in the value of this counter can occur at re-
initialization
of the management system, and/or re-initialization of the MPC,
and at
other times, as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 9 }
mpcStatTxMpoaImpReplyAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful MPOA Cache Imposition replies
transmitted by this MPC with an MPOA CIE Code of 0x00
`Success'.
Discontinuities in the value of this counter can occur at re-
initialization
of the management system, and/or re-initialization of the MPC,
and at
other times, as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 10 }
mpcStatTxMpoaImpReplyInsufECResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies transmitted with
an MPOA CIE Code of 0x81, `Insufficient resources to
accept egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 11 }
mpcStatTxMpoaImpReplyInsufSCResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x82, `Insufficient resources to
accept shortcut'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 12 }
mpcStatTxMpoaImpReplyInsufEitherResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x83, `Insufficient resources to
accept either shortcut or egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 13 }
mpcStatTxMpoaImpReplyUnsupportedInetProt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x84, `Unsupported Internetwork Layer
protocol'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 14 }
mpcStatTxMpoaImpReplyUnsupportedMacEncaps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x85, `Unsupported MAC Layer
encapsulation'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 15 }
mpcStatTxMpoaImpReplyUnspecifiedOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x88, `Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpcStatisticsEntry 16 }
mpcStatTxMpoaEgressCachePurgeRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Egress Cache Purge Requests transmitted
by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 17 }
mpcStatRxMpoaEgressCachePurgeReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Egress Cache Purge Replies received by
this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 18 }
mpcStatRxMpoaKeepAlives OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Keep Alive messages received by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 19 }
mpcStatRxMpoaTriggers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Trigger messages received by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 20 }
mpcStatRxMpoaDataPlanePurges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Data Plane Purge messages received
by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 21 }
mpcStatTxMpoaDataPlanePurges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Data Plane Purge messages transmitted
by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 22 }
mpcStatRxNhrpPurgeRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Purge Requests received by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 23 }
mpcStatTxNhrpPurgeReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Purge Replies transmitted by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 24 }
mpcStatRxErrUnrecognizedExtensions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `Unrecognized Extension'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 25 }
mpcStatRxErrLoopDetecteds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `Loop Detected'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 26 }
mpcStatRxErrProtoAddrUnreachables OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by this
MPC with the error code `Protocol Address Unreachable'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 27 }
mpcStatRxErrProtoErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `Protocol Errors'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 28 }
mpcStatRxErrSduSizeExceededs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `SDU Size Exceeded'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 29 }
mpcStatRxErrInvalidExtensions OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `Invalid Extensions'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 30 }
mpcStatRxErrInvalidReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `Invalid Reply'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 31 }
mpcStatRxErrAuthenticationFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `Authentication Failure'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 32 }
mpcStatRxErrHopCountExceededs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Error Indication packets received by
this MPC with the error code `Hop Count Exceeded'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indicated by the value of mpcDiscontinuityTime."
::= { mpcStatisticsEntry 33 }
--
-- MPOA Client Protocol support group
--
mpcProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of protocols, per MPC, for which flow
detection is enabled"
REFERENCE
"Multiprotocol Over ATM Version 1.0 (Letter Ballot),
Section 4.1.2.1 MPC Parameters"
::= { mpcObjects 6 }
mpcProtocolEntry OBJECT-TYPE
SYNTAX MpcProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row indicates one protocol for which an MPC will
do flow detection. If the LECS was contacted for
configuration information, and the Control Octet of
the MPC-p3 has the value of 0x01, `Enable', then protocol
values retrieved from the LECS are reflected in this
table and the mpcLECSValue object will be (1) true.
Also, the user or agent can create rows which
appropriately correspond to the MPC denoted by mpcIndex,
and the mpcLECSValue object will be set to (2) false.
NOTE: if the LECS does not return information for the
MPC-p3 parameter, or if in manual mode, the user or
agent should create at least one entry for the
corresponding MPC.
Both, LECS and user and/or agent created rows may
exist in this Table."
INDEX { mpcIndex, mpcFlowDetectProtocol }
::= {mpcProtocolTable 1 }
MpcProtocolEntry ::= SEQUENCE {
mpcFlowDetectProtocol InternetworkAddrType,
mpcLECSValue TruthValue,
mpcProtocolRowStatus RowStatus
}
mpcFlowDetectProtocol OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The protocol on which flow detection is performed.
If this value was obtained from the LECS then this
value is one of the collection of values returned
in the MPC-p3 parameter."
::= { mpcProtocolEntry 1 }
mpcLECSValue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects if the current entry is due to
a retrieval from the LECS or not. If this entry is
due to the LECS, then true(1) is the value for this
object, otherwise, false (2)."
::= { mpcProtocolEntry 2 }
mpcProtocolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used by an agent or manager to
create, delete or modify a row in this table."
::= { mpcProtocolEntry 3 }
--
-- LEC -> MPC Mapping group
--
mpcMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping the `lecIndex' values of
LANE Clients to the `mpcIndex' values of
corresponding MPOA Clients."
::= { mpcObjects 7 }
mpcMappingEntry OBJECT-TYPE
SYNTAX MpcMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row defines one lecIndex --> mpcIndex mapping.
The mpcIndex that a lecIndex maps to is not
necessarily unique (an MPC can serve many LECs, however,
a LEC cannot be served by more than one MPC)."
REFERENCE
"Multiprotocol Over ATM Version 1.0 (Letter Ballot),
Section 4.4."
INDEX { lecIndex }
::= { mpcMappingTable 1 }
MpcMappingEntry ::= SEQUENCE {
mpcMappingRowStatus RowStatus,
mpcMappingIndex MpcIndex
}
mpcMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used by an agent or manager to create, delete
or modify a row in this table."
::= { mpcMappingEntry 1 }
mpcMappingIndex OBJECT-TYPE
SYNTAX MpcIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mpcIndex of the MPOA Client that is performing
flow detection for the LANE Client represented by
the lecIndex."
::= { mpcMappingEntry 2 }
--
-- MPOA Client MPS information group
--
mpcMpsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcMpsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a read-only table which contains
information about the MPSs that these MPCs
know about."
::= { mpcObjects 8 }
mpcMpsEntry OBJECT-TYPE
SYNTAX MpcMpsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row created by an MPC. The MPC learns about
an MPS and creates a row."
INDEX { mpcMpsIndex }
::= { mpcMpsTable 1 }
MpcMpsEntry ::= SEQUENCE {
mpcMpsIndex MpsIndex,
mpcMpsAtmAddr AtmAddr
}
mpcMpsIndex OBJECT-TYPE
SYNTAX MpsIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MPS's index which is used to identify
a row in this table."
::= { mpcMpsEntry 1 }
mpcMpsAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Control ATM Address of the MPS"
::= { mpcMpsEntry 2 }
--
-- MPOA Client's MAC Address group
--
-- the following table has been obsoleted it does
-- not support multinetted capabilities.
-- Please see the section of the
-- MPOA v1.1 for a complete explanation of the
-- multinetted capabilities.
-- This table has been replaced by the
-- mpcMpsMultipleMacAddressTable.
mpcMpsMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcMpsMacAddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"This is a read-only table which contains
information about all the MPSs' MAC Addresses
that these MPCs know about."
::= { mpcObjects 9 }
mpcMpsMacAddressEntry OBJECT-TYPE
SYNTAX MpcMpsMacAddressEntry
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"A row is created by an MPC. The MPC learns about an
MPS's MAC Address and creates a row."
INDEX { mpcMpsIndex,
mpcLecIndex
}
::= { mpcMpsMacAddressTable 1 }
MpcMpsMacAddressEntry ::= SEQUENCE {
mpcLecIndex LecIndex,
mpcMpsMacAddress MacAddress
}
mpcLecIndex OBJECT-TYPE
SYNTAX LecIndex
MAX-ACCESS not-accessible
STATUS obsolete
DESCRIPTION
"The lecIndex which represents the associated LEC."
::= { mpcMpsMacAddressEntry 1 }
mpcMpsMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS obsolete
DESCRIPTION
"The MAC Address of the MPS."
REFERENCE
"Multiprotocol Over ATM Version 1.0 (Letter Ballot),
Section 3.3.3.1"
::= { mpcMpsMacAddressEntry 2 }
--
-- MPOA Client Ingress Cache group
--
mpcIngressCacheTxTotalPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets transmitted over MPC Short Cuts."
::= { mpcObjects 10 }
mpcIngressCacheTxTotalOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted over MPC Short Cuts."
::= { mpcObjects 11 }
mpcIngressCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcIngressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for MPC Caches for
the ingress MPC."
::= { mpcObjects 12 }
mpcIngressCacheEntry OBJECT-TYPE
SYNTAX MpcIngressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains control information
for a row in a MPC's Ingress Cache."
INDEX { mpcIngressCacheDestInetworkAddrType,
mpcIngressCacheDestAddr,
mpcIndex,
mpcMpsIndex
}
::= { mpcIngressCacheTable 1 }
MpcIngressCacheEntry ::= SEQUENCE {
mpcIngressCacheDestInetworkAddrType InternetworkAddrType,
mpcIngressCacheDestAddr InternetworkAddr,
mpcIngressCachePrefixLen Integer32,
mpcIngressCacheDestAtmAddr AtmAddr,
mpcIngressCacheSrcAtmAddr AtmAddr,
mpcIngressCacheEntryState INTEGER,
mpcIngressCacheEgressCacheTagValid TruthValue,
mpcIngressCacheEgressCacheTag Integer32,
--
-- Information for diagnosing problems
--
mpcIngressCacheLastNhrpCieCode INTEGER,
mpcIngressCacheSigErrCode Integer32,
mpcIngressCacheRetries Counter32,
mpcIngressCacheTimeUntilNextResolutionRequest
TimeInterval,
mpcIngressCacheHoldingTime TimeInterval,
mpcIngressCacheServiceCategory INTEGER
}
mpcIngressCacheDestInetworkAddrType OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the destination internetwork layer address."
::= { mpcIngressCacheEntry 1 }
mpcIngressCacheDestAddr OBJECT-TYPE
SYNTAX InternetworkAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination internetwork layer address for which
this entry is defined."
::= { mpcIngressCacheEntry 2 }
mpcIngressCachePrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines an equivalence class of addresses that match
Prefix Length bit positions of the destination
internetwork layer address."
::= { mpcIngressCacheEntry 3 }
mpcIngressCacheDestAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Destination ATM Address received in the MPOA
Resolution Reply."
::= { mpcIngressCacheEntry 4 }
mpcIngressCacheSrcAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Source ATM Address for the MPOA Resolution Request."
::= { mpcIngressCacheEntry 5 }
mpcIngressCacheEntryState OBJECT-TYPE
SYNTAX INTEGER {
doesNotExist (1),
inactive (2),
active(3),
negative(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The present state of this MPC ingress cache.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet
active. For an example, if
using the Finite State Machine
Appendix I.2, then the states
Cached and query are considered
`inactive'.
active (3) -- state exists, entry is active.
For an example, if using the
Finite State Machine in Appendix I.2,
then the states resolved and refresh
are considered `active'.
negative (4) -- state exists, entry is negative,
which could mean a NAK response was
received, or entry is doing a
retry, etc. For example, if using
the Finite State Machine in Appendix
I.2, then the state `hold down' is
considered `negative'."
REFERENCE
"Multiprotocol Over ATM, Letter Ballot, Appendix I.2."
::= { mpcIngressCacheEntry 6 }
mpcIngressCacheEgressCacheTagValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is true(1), then a valid
Egress Cache Tag is present and the value of the Egress
Cache Tag is in mpcIngressCacheEgressCacheTag. Otherwise,
if this value is false(2), then there was no Egress Cache
Tag, and the value of mpcIngressCacheEgressCacheTag is
undefined."
::= { mpcIngressCacheEntry 7 }
mpcIngressCacheEgressCacheTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a valid Egress Cache Tag is present, then this
object contains the value of that tag. To determine
if this object contains a valid value,
mpcIngressCacheEgressTagValid should be used."
REFERENCE
"Multiprotocol Over ATM Version 1.0 (Letter Ballot),
Section 4.4.4.1."
::= { mpcIngressCacheEntry 8 }
mpcIngressCacheLastNhrpCieCode OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The last NHRP CIE code received for this entry. This
value is valid only during the Hold Down period of the
cache entry. This value is undefined otherwise."
REFERENCE
"Normative section 4.4.6.1.1 of Multiprotocol Over
ATM Version 1.0 (Letter Ballot)"
::= { mpcIngressCacheEntry 9}
mpcIngressCacheSigErrCode OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Error code or Success of the last sinalling request
for this cache entry."
::= { mpcIngressCacheEntry 10 }
mpcIngressCacheRetries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of times this MPC has issued a
resolution request since it received a valid reply."
::= { mpcIngressCacheEntry 11 }
mpcIngressCacheTimeUntilNextResolutionRequest OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The amount of time the MPC
must wait before issuing the next resolution request."
::= { mpcIngressCacheEntry 12 }
mpcIngressCacheHoldingTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time that this MPC's Ingress Cache Entry will remain
valid. If the mpcIngressCacheEntryState is not active
this value will be zero."
::= { mpcIngressCacheEntry 13 }
mpcIngressCacheServiceCategory OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service categories supported for this shortcut."
REFERENCE
"Lane V2 LUNI TLVs. AF-LANE-0084 page 122"
::= { mpcIngressCacheEntry 14 }
--
-- MPOA Client Egress Cache group
--
mpcEgressCacheRxTotalPackets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counts the total number of packets
received by MPC Short Cuts."
::= { mpcObjects 13 }
mpcEgressCacheRxTotalOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This counts the total number of octets
received by MPC Short Cuts."
::= { mpcObjects 14 }
mpcEgressCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcEgressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Egress Cache information for
all the MPCs which this agent manages."
::= { mpcObjects 15 }
mpcEgressCacheEntry OBJECT-TYPE
SYNTAX MpcEgressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the MPOA Client's Egress Cache table."
INDEX {
mpcEgressCacheId,
mpcIndex,
mpcMpsIndex
}
::= { mpcEgressCacheTable 1 }
MpcEgressCacheEntry ::= SEQUENCE {
mpcEgressCacheId Integer32,
mpcEgressCacheInetworkAddrType InternetworkAddrType,
mpcEgressCacheIDestAddr InternetworkAddr,
mpcEgressCachePrefixLen Integer32,
mpcEgressCacheEntryState INTEGER,
mpcEgressCacheEgressCacheTagValid TruthValue,
mpcEgressCacheEgressCacheTag Integer32,
mpcEgressCacheHoldTime TimeInterval,
mpcEgressCacheDataLinkHeader OCTET STRING,
mpcEgressCacheIngressMpcDataAtmAddr AtmAddr,
mpcEgressCacheLecIndex LecIndex,
mpcEgressCacheServiceCategory INTEGER
}
mpcEgressCacheId OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Cache ID Provided by the MPS in the Cache
Imposition Request."
::= { mpcEgressCacheEntry 1 }
mpcEgressCacheInetworkAddrType OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of Internetwork Address in this cache entry."
::= { mpcEgressCacheEntry 2 }
mpcEgressCacheIDestAddr OBJECT-TYPE
SYNTAX InternetworkAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination internetwork layer address
for which this entry is defined."
::= { mpcEgressCacheEntry 3 }
mpcEgressCachePrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines an equivalence class of addresses that match
Prefix Length bit positions of the destination
internetwork layer address."
::= { mpcEgressCacheEntry 4 }
mpcEgressCacheEntryState OBJECT-TYPE
SYNTAX INTEGER {
doesNotExist(1),
inactive(2),
active (3),
negative (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The present state of this MPC egress cache entry.
The states are:
doesNotExist (1) -- the state is not yet available,
inactive (2) -- state exists, entry is not yet active,
active (3) -- state exists, entry is active.
For example,if using the Finite State
Machine in Appendix 1.5,
the states active and flooding
are `active' state.
negative (4) -- state exists, entry is negative.
For example,if using the Finite
State Machine in Appendix 1.5,
the state purging is `negative'."
REFERENCE
"MPOA Letter Ballot, Appendix I.5."
::= { mpcEgressCacheEntry 5 }
mpcEgressCacheEgressCacheTagValid OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the value of this object is true(1), then a valid
Egress Cache Tag is present and the value of the Egress
Cache Tag is in mpcEgressCacheEgressCacheTag. Otherwise,
if this value is false(2), then there was no Egress
Cache Tag, and the value of mpcEgressCacheEgressCacheTag
is undefined."
::= { mpcEgressCacheEntry 6 }
mpcEgressCacheEgressCacheTag OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If a valid Egress Cache Tag is present, then this
object contains the value of that tag. To determine
if this object contains a valid value,
mpcEgressCacheEgressCacheTagValid should be used."
::= { mpcEgressCacheEntry 7 }
mpcEgressCacheHoldTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The remaining time for which this entry is valid."
::= { mpcEgressCacheEntry 8 }
mpcEgressCacheDataLinkHeader OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The DataLink header that the egress client rebuilds
the original DataLink packet with."
::= { mpcEgressCacheEntry 9 }
mpcEgressCacheIngressMpcDataAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Data ATM Address of the ingress MPC that issued
the MPOA Resolution request"
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 81."
::= { mpcEgressCacheEntry 10 }
mpcEgressCacheLecIndex OBJECT-TYPE
SYNTAX LecIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the lecIndex of the LANE Client that this flow
is associated with. This can be used to get the ELAN
name as well as other LANE parameters."
::= { mpcEgressCacheEntry 11 }
mpcEgressCacheServiceCategory OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a bitmap describing the service categories
supported for this shortcut. This value represents
an inclusive OR of the bits:
bit 1 - if rt-VBR is supported,
bit 2 - if nrt-VBR is supported,
bit 4 - if ABR is supported,
bit 8 - if CBR is supported
A value of 0 (zero) indicates that UBR is supported."
REFERENCE
"Lane V2 LUNI TLVs. AF-LANE-0084, page 122."
::= { mpcEgressCacheEntry 12 }
-- The following Table replaces the mpcMpsMacAddressTable (which
-- has been obsoleted.) The following table is more flexible in
-- that it can represent more than one MPS MAC Address used by
-- the MPC during flow detection.
mpcMpsObjects OBJECT IDENTIFIER ::= { mpcObjects 16 }
mpcMpsMultipleMacAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpcMpsMultipleMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is a read-only table which contains
information about all the MPSs' MAC Addresses
that these MPCs use during flow detection.
Note that due to the multinetted case an MPC may learn
about more than one MAC address from an MPS,
thus there may be more than one MAC address for the
same MPC - MPS - LecIndex represented in this
Table. These MacAddresses are differentiated by
the mpcMpsMacAddressIndex."
::= { mpcMpsObjects 1 }
mpcMpsMultipleMacAddressEntry OBJECT-TYPE
SYNTAX MpcMpsMultipleMacAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row is created by an MPC. The MPC learns about a
MPS and the one or more MAC Address of the MPS which
the MPC uses during flow detection. Each row represents
an MPS MAC Address used by an MPC during flow detection."
INDEX { mpcMpsIndex,
mpcFlowDetectLecIndex,
mpcMpsMacAddressIndex
}
::= { mpcMpsMultipleMacAddressTable 1 }
MpcMpsMultipleMacAddressEntry ::= SEQUENCE {
mpcFlowDetectLecIndex LecIndex,
mpcMpsMacAddressIndex Integer32,
mpcMpsFlowDetectMacAddress MacAddress
}
mpcFlowDetectLecIndex OBJECT-TYPE
SYNTAX LecIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The lecIndex which represents the associated LEC."
::= { mpcMpsMultipleMacAddressEntry 1 }
mpcMpsMacAddressIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This value is used to differentiate MAC Addresses from
the same MPS used by the same MPC during flow detection.
This value should be unique within the scope of this table."
::= { mpcMpsMultipleMacAddressEntry 2 }
mpcMpsFlowDetectMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An MPS MAC Address used by an MPC during flow detection."
::= { mpcMpsMultipleMacAddressEntry 3 }
--
-- MPOA Server Objects
--
mpsObjects OBJECT IDENTIFIER ::= { mpoaMIBObjects 3 }
mpsNextIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains an appropriate value to
be used for mpsIndex when creating entries in
the mpsConfigTable. The value 0 indicates that
no new rows can be created. Otherwise, it is
recommended that values are assigned contiguously,
starting from 1.
MPS creation by a Manager: To obtain the mpsIndex
value for a new entry, the manager issues a management
protocol retrieval operation to obtain the current value
of this object. If the value retrieved is 0 (zero), the
manager cannot create a row.
After each retrieval of a non-zero value, the manager
should issue a management protocol SET operation using
the value just retrieved. If the SET is successful,
the agent should update the value to the next
unassigned index, or zero if appropriate.
NOTE: the manager may also issue a set on this object
with a value of its own choosing. If the set is successful,
the manager may use this value for the mpsIndex. In this
case, the agent would update the value to the next
unassigned index, or zero if appropriate.
The definition of `next unassigned index' is any
mpsNextIndex value that has not yet been set by a
manager, or reserved by the agent (see next paragraph),
since this agent was last re-initialized.
MPS creation by an Agent: When a row in the mpsConfigTable is
created by an agent, the agent should reserve the value of
the index by updating the value of this object to
the next unassigned index or zero if appropriate. Thus, a
manager will not be able to set an index reserved by an agent.
In the situation of an agent re-initialization all currently
used mpsIndexes must be preserved. In other words, the Agent
should store in non-volatile memory all the currently used
mpsIndexes (along with all necessary configuration information
from the mpsConfigTable). When the agent is re-initialized,
the mpsNextIndex value is any valid Integer32 which is not
being used as an mpsIndex, except 0 which maintains its
original definition of indicating that a row cannot be created."
::= { mpsObjects 1 }
--
-- MPOA Server configuration group
--
mpsConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The MPOA Server Configuration Table.
This table represents the configuration information for
all MPOA Servers which this agent manages."
::= { mpsObjects 2 }
mpsConfigEntry OBJECT-TYPE
SYNTAX MpsConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPOA Server Configuration Entry.
Each entry contains configuration information
for one MPOA Server."
INDEX { mpsIndex }
::= { mpsConfigTable 1 }
MpsConfigEntry ::= SEQUENCE {
-- Primary config info: Index, mode and address information
--
mpsIndex MpsIndex,
mpsRowStatus RowStatus,
mpsConfigMode INTEGER,
mpsCtrlAtmAddr AtmConfigAddr,
--
-- MPS parameters that can be obtained from
-- the LECS.
--
mpsKeepAliveTime Integer32, -- MPS-p1
mpsKeepAliveLifeTime Integer32, -- MPS-p2
-- The Flow-detection Protocols (denoted with MPS-p3)
-- are represented in the mpcProtocolsTable.
mpsInitialRetryTime Integer32, -- MPS-p4
mpsRetryTimeMaximum Integer32, -- MPS-p5
mpsGiveupTime Integer32, -- MPS-p6
mpsDefaultHoldingTime Integer32 -- MPS-p7
}
mpsIndex OBJECT-TYPE
SYNTAX MpsIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value which uniquely identifies this conceptual
row in the mpsConfigTable. The `mpsNextIndex' object
needs to be used to determine the value of this object.
A row cannot be added, unless the mpsCtrlAtmAddress
is unique.
In the event of an MPS re-initialization, the value
of this mpsIndex must remain the same. However, in
the event of an agent re-initialization, this value
does not need to be preserved."
::= { mpsConfigEntry 1 }
mpsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows creation and deletion of MPOA Servers.
Within each conceptual mpsConfigTable row, objects which are
writable may be modified regardless of the value of
mpsRowStatus. It is not necessary to set a row's status
to `notInService' first.
A row cannot be created, unless the mpsAtmCtrlAddress
in this table is unique. When an MPOA Server is created
via this object, it will initially have
`mpsActualState' = `initialState'."
::= { mpsConfigEntry 2 }
mpsConfigMode OBJECT-TYPE
SYNTAX INTEGER {
automatic(1),
manual(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether this MPS should auto-configure
the next time it is (re-)initialized.
In automatic(1) mode the LECS is contacted and
requests are made for the MPS-p* parameters.
In manual(2) mode, the values of the configuration
parameters are obtained from the mpsConfigTable
and the mpsProtocolTable."
DEFVAL { automatic }
::= { mpsConfigEntry 3 }
mpsCtrlAtmAddr OBJECT-TYPE
SYNTAX AtmConfigAddr
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The MPS's Control ATM Address. There exists one
Control ATM Address per MPS, therefore, the value
of this entry is unique within the table."
::= { mpsConfigEntry 4 }
mpsKeepAliveTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPS-p1 Keep-alive time is max interval between
the MPS sending MPOA Keep-Alives in seconds."
DEFVAL { 10 }
::= { mpsConfigEntry 5 }
mpsKeepAliveLifeTime OBJECT-TYPE
SYNTAX Integer32 (3..1000)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPS-p2 Keep-Alive Lifetime
The length of time an MPC may consider a Keep-Alive
valid in seconds. This value must be at least
three times the mpsKeepAliveTime (MPS-p1)."
DEFVAL { 35 }
::= { mpsConfigEntry 6 }
mpsInitialRetryTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPS-p4 is initial value in seconds for the
MPOA retry mechanism."
DEFVAL { 5 }
::= { mpsConfigEntry 7 }
mpsRetryTimeMaximum OBJECT-TYPE
SYNTAX Integer32 (10..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPS-p5 cumulative max value in seconds
for Retry Time (MPS-p4)."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Section 4.3 MPOA Retry Mechanism"
DEFVAL { 40 }
::= { mpsConfigEntry 8 }
mpsGiveupTime OBJECT-TYPE
SYNTAX Integer32 (5..300)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPS-p6 Give Up Time.
Minimum time in seconds to wait before giving up on a
pending resolution request."
DEFVAL { 40 }
::= { mpsConfigEntry 9 }
mpsDefaultHoldingTime OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"MPS-p7 Default Holding Time in minutes.
The default Holding Time used in NHRP
Resolution Replies. An egress MPS may use
local information to determine a more
appropriate Holding Time."
DEFVAL { 20 }
::= { mpsConfigEntry 10 }
--
-- MPOA Server Actual group
--
mpsActualTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsActualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A read-only table containing identification, status,
and operational information about the MPOA
Servers this agent manages."
::= { mpsObjects 3 }
mpsActualEntry OBJECT-TYPE
SYNTAX MpsActualEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the MPS Actual Table.
An entry represents a specific MPOA Server's
status and operation information."
AUGMENTS { mpsConfigEntry }
::= { mpsActualTable 1 }
MpsActualEntry ::= SEQUENCE {
mpsActualState INTEGER,
mpsDiscontinuityTime TimeStamp,
mpsActualConfigMode INTEGER,
--
-- Actual values of parameters
--
mpsActualKeepAlive Integer32, -- MPS-p1
mpsActualKeepAliveLifeTime Integer32, -- MPS-p2
-- The Internetwork-layer Protocols for MPS-p3 are
-- represented in the mpsProtocolTable.
--
mpsActualInitialRetryTime Integer32, -- MPS-p4
mpsActualRetryTimeMaximum Integer32, -- MPS-p5
mpsActualGiveupTime Integer32, -- MPS-p6
mpsActualDefaultHoldingTime Integer32 -- MPS-p7
}
mpsActualState OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
initialState(2),
up(3),
down(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the current operational
status of the MPOA Server."
::= { mpsActualEntry 1 }
mpsDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime on the most recent occasion at
which any one or more of this MPS's counters
experienced a discontinuity. The relevant counters
are the specific instances associated with this
MPS. If discontinuities have not occurred since the
last re-initialization of the local management subsystem,
then this object contains a zero value."
::= { mpsActualEntry 2 }
mpsActualConfigMode OBJECT-TYPE
SYNTAX INTEGER {
automatic(1),
manual(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether this MPS auto-configured
when it was last (re-)initialized."
::= { mpsActualEntry 3 }
mpsActualKeepAlive OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum amount of time in seconds this MPS waits
between sending MPOA Keep-Alives."
::= { mpsActualEntry 5 }
mpsActualKeepAliveLifeTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The length of time in seconds this MPS
considers a Keep-Alive valid."
::= { mpsActualEntry 6 }
mpsActualInitialRetryTime OBJECT-TYPE
SYNTAX Integer32 (1..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual initial value in seconds for the MPOA
retry mechanism."
DEFVAL { 5 }
::= { mpsActualEntry 7 }
mpsActualRetryTimeMaximum OBJECT-TYPE
SYNTAX Integer32 (30..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual cumulative max value in seconds
for Retry Time."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Section 4.3 MPOA Retry Mechanism"
DEFVAL { 40 }
::= { mpsActualEntry 8 }
mpsActualGiveupTime OBJECT-TYPE
SYNTAX Integer32 (5..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Minimum time in seconds that this MPS waits
before giving up on a pending resolution request."
DEFVAL { 40 }
::= { mpsActualEntry 9 }
mpsActualDefaultHoldingTime OBJECT-TYPE
SYNTAX Integer32 (1..120)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual Holding Time in minutes used in
NHRP Resolution Replies."
::= { mpsActualEntry 10 }
--
-- MPOA Server statistics group
--
mpsStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table represents the statistical information
for the MPSs, which this agent manages."
::= { mpsObjects 4 }
mpsStatisticsEntry OBJECT-TYPE
SYNTAX MpsStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row in this table contains statistics
for one MPOA server."
AUGMENTS { mpsConfigEntry }
::= { mpsStatisticsTable 1 }
MpsStatisticsEntry ::= SEQUENCE {
mpsStatRxMpoaResolveRequests Counter32,
mpsStatTxMpoaResolveReplyAcks Counter32,
mpsStatTxMpoaResolveReplyInsufECResources Counter32,
mpsStatTxMpoaResolveReplyInsufSCResources Counter32,
mpsStatTxMpoaResolveReplyInsufEitherResources Counter32,
mpsStatTxMpoaResolveReplyUnsupportedInetProt Counter32,
mpsStatTxMpoaResolveReplyUnsupportedMacEncaps Counter32,
mpsStatTxMpoaResolveReplyUnspecifiedOther Counter32,
mpsStatTxMpoaResolveReplyOther Counter32,
mpsStatGiveupTimeExpireds Counter32,
mpsStatTxMpoaImpRequests Counter32,
mpsStatRxMpoaImpReplyAcks Counter32,
mpsStatRxMpoaImpReplyInsufECResources Counter32,
mpsStatRxMpoaImpReplyInsufSCResources Counter32,
mpsStatRxMpoaImpReplyInsufEitherResources Counter32,
mpsStatRxMpoaImpReplyUnsupportedInetProt Counter32,
mpsStatRxMpoaImpReplyUnsupportedMacEncaps Counter32,
mpsStatRxMpoaImpReplyUnspecifiedOther Counter32,
mpsStatRxMpoaImpReplyOther Counter32,
mpsStatRxMpoaEgressCachePurgeRequests Counter32,
mpsStatTxMpoaEgressCachePurgeReplies Counter32,
mpsStatTxMpoaTriggers Counter32,
mpsStatTxNhrpResolveRequests Counter32,
mpsStatRxNhrpResolveReplies Counter32,
mpsStatRxNhrpResolveRequests Counter32,
mpsStatTxNhrpResolveReplies Counter32
}
mpsStatRxMpoaResolveRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Requests received
by this MPS which are translated to NHRP
resolve requests.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 1 }
mpsStatTxMpoaResolveReplyAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this
MPS which contain the MPOA CIE Code of 0x00, `Success'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 2 }
mpsStatTxMpoaResolveReplyInsufECResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE Code of 0x81, `Insufficient
resources to accept egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 3 }
mpsStatTxMpoaResolveReplyInsufSCResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE Code of 0x82,
`Insufficient resources to accept shortcut'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 4 }
mpsStatTxMpoaResolveReplyInsufEitherResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x83, `Insufficient
resources to accept either shortcut or egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 5 }
mpsStatTxMpoaResolveReplyUnsupportedInetProt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x84, `Unsupported
Internetwork
Layer protocol'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 6 }
mpsStatTxMpoaResolveReplyUnsupportedMacEncaps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x85, `Unsupported MAC
layer encapsulation'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 7 }
mpsStatTxMpoaResolveReplyUnspecifiedOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x88, `Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 8 }
mpsStatTxMpoaResolveReplyOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Resolve Replies transmitted by this
MPS which are not counted above. NOTE: this would
include NHRP errors.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 9 }
mpsStatGiveupTimeExpireds OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the MPS Give up Time (MPS-p6)
has expired while waiting for a reply from a
re-originated MPOA resolution request, i.e. a
reply for a translated NHRP resolution request.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 10 }
mpsStatTxMpoaImpRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Requests
transmitted by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 11 }
mpsStatRxMpoaImpReplyAcks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful MPOA Cache Imposition Replies
received by this MPS which contain an MPOA CIE Code of 0x00,
`Success'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 12 }
mpsStatRxMpoaImpReplyInsufECResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x81,
`Insufficient resources to accept egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 13 }
mpsStatRxMpoaImpReplyInsufSCResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x82,
`Insufficient resources to accept shortcut'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 14 }
mpsStatRxMpoaImpReplyInsufEitherResources OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x83,
`Insufficient resources to accept either shortcut or
egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 15 }
mpsStatRxMpoaImpReplyUnsupportedInetProt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x84,
`Unsupported Internetwork Layer protocol'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 16 }
mpsStatRxMpoaImpReplyUnsupportedMacEncaps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x85,
`Unsupported MAC layer encapsulation'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 17 }
mpsStatRxMpoaImpReplyUnspecifiedOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x88,
`Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 18 }
mpsStatRxMpoaImpReplyOther OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Cache Imposition Replies received by
this MPS which are not counted previously. NOTE:
this would include NHRP errors.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000. Page 62."
::= { mpsStatisticsEntry 19 }
mpsStatRxMpoaEgressCachePurgeRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Egress Cache Purges Requests
received by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 20 }
mpsStatTxMpoaEgressCachePurgeReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Egress Cache Purge Replies
transmitted by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 21 }
mpsStatTxMpoaTriggers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MPOA Trigger messages transmitted by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Section 4.7.2.1 MPOA Trigger"
::= { mpsStatisticsEntry 22 }
mpsStatTxNhrpResolveRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of MPOA Resolution Requests received
by the Ingress MPS which were translated to NHRP
Resolution Requests and transmitted to the NHS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 23 }
mpsStatRxNhrpResolveReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of NHRP Resolution Replies received
by the Ingress.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 24 }
mpsStatRxNhrpResolveRequests OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of NHRP Resolution Requests received by
the Egress MPS from the NHS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 25 }
mpsStatTxNhrpResolveReplies OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of NHRP Resolution Replies transmitted
by the Egress MPS to the NHS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,
as indicated by the value of mpsDiscontinuityTime."
::= { mpsStatisticsEntry 26 }
--
-- MPOA Server Protocol support group
--
mpsProtocolTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of protocols, per MPS, for which
MPOA resolution is enabled."
REFERENCE
"Multiprotocol Over ATM Version 1.0 (Letter Ballot),
Section 4.1.1.1 MPS Parameters"
::= { mpsObjects 5 }
mpsProtocolEntry OBJECT-TYPE
SYNTAX MpsProtocolEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row indicates one protocol for which an MPS
will perform MPOA resolution.
If the LECS was contacted for configuration
information, and the MPS-p3's control octet is set to Enable,
0x01, then protocol values retrieved from the LECS are reflected
in this table and the mpsLECSValue object will be (1) true.
Also, the user or agent can create rows which
appropriately correspond to the MPS denoted by mpsIndex,
and the mpsLECSValue object will be set to (2) false.
NOTE: if the LECS does not return information for
the MPS-p3 parameter, or if in manual mode, the user or agent
should create at least one entry for the corresponding MPS.
Both, LECS and user and/or agent created rows may exist in
this Table."
INDEX { mpsIndex,
mpsInternetworkLayerProtocol
}
::= {mpsProtocolTable 1 }
MpsProtocolEntry ::= SEQUENCE {
mpsInternetworkLayerProtocol InternetworkAddrType, -- MPS-p3
mpsLECSValue TruthValue,
mpsProtocolRowStatus RowStatus
}
mpsInternetworkLayerProtocol OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"MPS-p3 A protocol on which to perform MPOA resolution."
::= { mpsProtocolEntry 1 }
mpsLECSValue OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object reflects if the current entry is due to
a retrieval from the LECS or not. If this entry is
due to the LECS, then true(1) is the value for this object,
otherwise, false (2)."
::= { mpsProtocolEntry 2 }
mpsProtocolRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object allows network managers to enable
resolution for the `mpsInternetworkLayerProtocol'."
::= { mpsProtocolEntry 3 }
--
-- MPOA Server LEC Mapping group
--
mpsMappingTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table mapping the `lecIndex' values of
LANE Clients to the `mpsIndex' values of
corresponding MPOA Servers."
::= { mpsObjects 6 }
mpsMappingEntry OBJECT-TYPE
SYNTAX MpsMappingEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each row defines one lecIndex --> mpsIndex mapping.
The mpsIndex that a lecIndex maps to is not
necessarily unique. In other words, there can be
multiple LECs associated with one MPS."
REFERENCE
"LAN Emulation Client Management Specification.
af-lane-0044-000."
INDEX { lecIndex }
::= { mpsMappingTable 1 }
MpsMappingEntry ::= SEQUENCE {
mpsMappingRowStatus RowStatus,
mpsMappingIndex MpsIndex
}
mpsMappingRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Allows creation, enabling/disabling of this row."
::= { mpsMappingEntry 1 }
mpsMappingIndex OBJECT-TYPE
SYNTAX MpsIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The mpsMappingIndex of the MPOA Server that is associated with
this LEC. The mpsMappingIndex corresponds to the mpsIndex."
::= { mpsMappingEntry 2 }
--
-- MPOA Server MPC Information Group
--
mpsMpcTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsMpcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This read-only table contains information about the
MPCs that these MPSs know about."
::= { mpsObjects 9 }
mpsMpcEntry OBJECT-TYPE
SYNTAX MpsMpcEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A row created by an MPS. The MPS learns about the MPC and
creates a row."
INDEX { mpsIndex,
mpsMpcIndex
}
::= { mpsMpcTable 1 }
MpsMpcEntry ::= SEQUENCE {
mpsMpcIndex MpcIndex,
mpsMpcCtrlAtmAddr AtmAddr
}
mpsMpcIndex OBJECT-TYPE
SYNTAX MpcIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The local index for the mpc represented by this entry"
::= { mpsMpcEntry 1 }
mpsMpcCtrlAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"MPC control ATM address "
::= { mpsMpcEntry 2 }
--
-- MPOA Server Ingress Cache (Address Resolution) group
--
mpsIngressCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsIngressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table tracks all the Ingress Cache information
of the MPSs which this agents manages."
::= { mpsObjects 7 }
mpsIngressCacheEntry OBJECT-TYPE
SYNTAX MpsIngressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A entry contains parameters and state variables
for a row in a MPS's Ingress Cache."
INDEX { mpsIngressCacheDestInternetworkAddrType,
mpsIngressCacheDestAddr,
mpsIndex,
mpsMpcIndex
}
::= { mpsIngressCacheTable 1 }
MpsIngressCacheEntry ::= SEQUENCE {
mpsIngressCacheDestInternetworkAddrType InternetworkAddrType,
mpsIngressCacheDestAddr InternetworkAddr,
mpsIngressCachePrefixLen Integer32,
mpsIngressCacheEntryState INTEGER,
mpsIngressCacheSrcInternetworkAddrType InternetworkAddrType,
mpsIngressCacheSrcAddr InternetworkAddr,
mpsIngressCacheSourceMpcCtrlAtmAddr AtmAddr,
mpsIngressCacheResolvedAtmAddr AtmAddr,
mpsIngressCacheHoldTime TimeInterval,
mpsIngressCacheMpoaRequestId Integer32,
mpsIngressCacheNhrpRequestId Integer32,
mpsIngressCacheServiceCategory INTEGER
}
mpsIngressCacheDestInternetworkAddrType OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of internetwork layer address of the
Destination Address."
::= { mpsIngressCacheEntry 1 }
mpsIngressCacheDestAddr OBJECT-TYPE
SYNTAX InternetworkAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ingress MPS Destination Internetwork Layer Address."
::= { mpsIngressCacheEntry 2 }
mpsIngressCachePrefixLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Prefix Length of the mpsIngressCacheDestAddr."
::= { mpsIngressCacheEntry 3 }
mpsIngressCacheEntryState OBJECT-TYPE
SYNTAX INTEGER { doesNotExist (1),
inactive(2),
active(3),
negative(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of this MPS Ingress cache.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet active
For example,if using the Finite
State Machine in Appendix I.3,
the state resolving is `inactive'.
active (3) -- state exists, entry is active.
For example,if using the Finite
State Machine in Appendix I.3,
the state resolved
is `active' state.
negative (4) -- state exists, entry is negative.
For example,if using the Finite
State Machine in Appendix I.3,
the state purging is `negative'."
REFERENCE
"Multiprotocol Over ATM, Letter Ballot, Appendix I.3."
::= { mpsIngressCacheEntry 4 }
mpsIngressCacheSrcInternetworkAddrType OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of internetwork layer address of the
Source Address."
::= { mpsIngressCacheEntry 5 }
mpsIngressCacheSrcAddr OBJECT-TYPE
SYNTAX InternetworkAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ingress MPS Source Internetwork Layer Address."
::= { mpsIngressCacheEntry 6 }
mpsIngressCacheSourceMpcCtrlAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM Address from the source of this MPOA request.
In other words, the Ingress MPC's Control Atm Address."
::= { mpsIngressCacheEntry 7 }
mpsIngressCacheResolvedAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM Address which has been resolved by an Egress MPC."
::= { mpsIngressCacheEntry 8 }
mpsIngressCacheHoldTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval that this value is valid."
::= { mpsIngressCacheEntry 9 }
mpsIngressCacheMpoaRequestId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The request ID contained in the MPOA resolution request
from the local Ingress MPC."
::= { mpsIngressCacheEntry 10 }
mpsIngressCacheNhrpRequestId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The request ID which this MPS generates to identify the
NHRP resolution request."
::= { mpsIngressCacheEntry 11 }
mpsIngressCacheServiceCategory OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service categories supported for this shortcut."
REFERENCE
"Lane V2 LUNI TLVs"
::= { mpsIngressCacheEntry 12 }
--
-- MPOA Server Egress Cache (Impositions) group
--
mpsEgressCacheTable OBJECT-TYPE
SYNTAX SEQUENCE OF MpsEgressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information regarding the
Egress MPOA Server Cache Table."
::= { mpsObjects 8 }
mpsEgressCacheEntry OBJECT-TYPE
SYNTAX MpsEgressCacheEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry represents an entry in the MPS's Egress
cache Table which keeps track of the state of the
impositions."
INDEX {
mpsEgressCacheId,
mpsIndex,
mpsMpcIndex
}
::= { mpsEgressCacheTable 1 }
MpsEgressCacheEntry ::= SEQUENCE {
mpsEgressCacheId INTEGER,
mpsEgressCacheDestInternetworkAddrType InternetworkAddrType,
mpsEgressCacheDestAddr InternetworkAddr,
mpsEgressCachePrefixLen INTEGER,
mpsEgressCacheHoldTime TimeInterval,
mpsEgressCacheEntryState INTEGER,
mpsEgressCacheDataLinkHeader OCTET STRING,
mpsEgressCacheElanId Integer32,
mpsEgressCacheSourceClientAtmAddr AtmAddr,
mpsEgressCacheNhrpRequestId Integer32,
mpsEgressCacheMpoaRequestId Integer32,
mpsEgressCacheServiceCategory INTEGER,
mpsEgressCacheNextHopInternetworkAddrType
InternetworkAddrType,
mpsEgressCacheNextHopAddr InternetworkAddr
}
mpsEgressCacheId OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The id which identifies this cache entry."
::= { mpsEgressCacheEntry 1 }
mpsEgressCacheDestInternetworkAddrType OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination protocol address type."
::= { mpsEgressCacheEntry 2 }
mpsEgressCacheDestAddr OBJECT-TYPE
SYNTAX InternetworkAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination protocol address."
::= { mpsEgressCacheEntry 3 }
mpsEgressCachePrefixLen OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination prefix length."
::= { mpsEgressCacheEntry 4 }
mpsEgressCacheHoldTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time interval that this value is valid."
::= { mpsEgressCacheEntry 5 }
mpsEgressCacheEntryState OBJECT-TYPE
SYNTAX INTEGER { doesNotExist(1),
inactive(2),
active(3),
negative(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The present states of this MPS egress cache entry.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet active
For example,if using the Finite
State Machine in Appendix 1.4,
the state imposing is `inactive'.
active (3) -- state exists, entry is active.
For example,if using the Finite
State Machine in Appendix 1.4,
the state imposed
is `active' state.
negative (4) -- state exists, entry is negative.
For example,if using the Finite
State Machine in Appendix 1.4,
the states purging and clearing
are `negative'."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Appendix I.4 Egress MPS Control State Machine."
::= { mpsEgressCacheEntry 6 }
mpsEgressCacheDataLinkHeader OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Data-Link Layer Header."
::= { mpsEgressCacheEntry 7 }
mpsEgressCacheElanId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The elan id that this Cache Imposition is sent on."
::= { mpsEgressCacheEntry 8 }
mpsEgressCacheSourceClientAtmAddr OBJECT-TYPE
SYNTAX AtmAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Ingress NHC's Atm Address used in the
original cache imposition."
REFERENCE
"Multiprotocol Over ATM. AF-MPOA-0087.000.
Page 45."
::= { mpsEgressCacheEntry 9 }
mpsEgressCacheNhrpRequestId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The request id from the original NHRP Resolution Request,
may be only useful in the Resolving State."
::= { mpsEgressCacheEntry 10 }
mpsEgressCacheMpoaRequestId OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The new request id which is generated for this imposition's
request, may be only useful in the Resolving State."
::= { mpsEgressCacheEntry 11 }
mpsEgressCacheServiceCategory OBJECT-TYPE
SYNTAX INTEGER (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The service categories supported for this shortcut."
REFERENCE
"Lane V2 LUNI TLVs"
::= { mpsEgressCacheEntry 12 }
mpsEgressCacheNextHopInternetworkAddrType OBJECT-TYPE
SYNTAX InternetworkAddrType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NextHop protocol address type."
::= { mpsEgressCacheEntry 13 }
mpsEgressCacheNextHopAddr OBJECT-TYPE
SYNTAX InternetworkAddr
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The NextHop protocol address."
::= { mpsEgressCacheEntry 14 }
--
-- Conformance Information
--
mpoaMIBConformance OBJECT IDENTIFIER ::= { mpoaMIB 2 }
mpoaMIBGroups
OBJECT IDENTIFIER ::= { mpoaMIBConformance 1}
mpoaMIBCompliances
OBJECT IDENTIFIER ::= { mpoaMIBConformance 2}
--
-- Compliance Statements
--
mpoaMpcMibBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The basic implementation requirements for SNMP entities
which support MPOA Clients."
MODULE -- this module
MANDATORY-GROUPS { mpcConfigGroup,
mpcActualGroup,
mpcDataAtmAddressGroup,
mpcStatisticsGroup,
mpcProtocolGroup,
mpcMpsGroup,
mpcIngressCacheGroup,
mpcEgressCacheGroup,
mpcMpsMultipleMacAddressGroup
}
OBJECT mpcRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcDataAtmAddressRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcProtocolRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
--
-- MPC Mapping Group Compliance
--
GROUP mpcMappingGroup
DESCRIPTION
"This group is mandatory only when there is NOT a one-to-one
relationship between the MPOA Client and the LANE Client.
Optionally, a one-to-one relationship between an MPOA Client
and a LANE Client can be enforced. To enforce this
one-to-one relationship the lecIndex for the LANE Client
and the mpcIndex for the MPOA Client must have the same
value.
If this one-to-one mapping is enforced, then the implementation
of the mpcMappingTable is unnecessary. (Since the lecIndex and
the mpcIndex contain the same value, there is no need to provide
a mapping of mpcIndex value to lecIndex value.)
The relationship between MPC and LEC is maintained by
ensuring that the mpcIndex is the same as the lecIndex
that is associated with it."
OBJECT mpcMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcMappingIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mpoaMIBCompliances 1 }
mpoaMpcMibAdvancedCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The advanced implementation requirements for SNMP entities
which support MPOA Clients."
MODULE -- this module
MANDATORY-GROUPS {
mpoaDeviceTypeGroup,
mpoaDeviceTypeMpsMacGroup,
mpcConfigGroup,
mpcActualGroup,
mpcDataAtmAddressGroup,
mpcStatisticsGroup,
mpcProtocolGroup,
mpcMpsGroup,
mpcIngressCacheTotalPacketGroup,
mpcIngressCacheGroup,
mpcEgressCacheTotalPacketGroup,
mpcEgressCacheGroup,
mpcMpsMultipleMacAddressGroup
}
OBJECT mpcRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcDataAtmAddressRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcProtocolRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
--
-- MPC Mapping Group Compliance
--
GROUP mpcMappingGroup
DESCRIPTION
"This group is mandatory only when there is NOT a one-to-one
relationship between the MPOA Client and the LANE Client.
Optionally, a one-to-one relationship between an MPOA Client
and a LANE Client can be enforced. To enforce this
one-to-one relationship the lecIndex for the LANE Client
and the mpcIndex for the MPOA Client must have the same
value.
If this one-to-one mapping is enforced, then the implementation
of the mpcMappingTable is unnecessary. (Since the lecIndex and
the mpcIndex contain the same value, there is no need to provide
a mapping of mpcIndex value to lecIndex value.)
The relationship between MPC and LEC is maintained by
ensuring that the mpcIndex is the same as the lecIndex
that is associated with it."
OBJECT mpcMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT mpcMappingIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mpoaMIBCompliances 2 }
mpoaMpcMibAdvancedPlusOctetsCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The AdvancedPlusOctets implementation requirements for SNMP
entities
which support MPOA Clients. This includes supporting
the 64 bit octet counters."
MODULE -- this module
MANDATORY-GROUPS {
mpoaDeviceTypeGroup,
mpoaDeviceTypeMpsMacGroup,
mpcConfigGroup,
mpcActualGroup,
mpcDataAtmAddressGroup,
mpcStatisticsGroup,
mpcProtocolGroup,
mpcMpsGroup,
mpcIngressCacheTotalPacketGroup,
mpcIngressCacheTotalOctetGroup,
mpcIngressCacheGroup,
mpcEgressCacheTotalPacketGroup,
mpcEgressCacheTotalOctetGroup,
mpcEgressCacheGroup,
mpcMpsMultipleMacAddressGroup
}
OBJECT mpcRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcDataAtmAddressRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcProtocolRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
--
-- MPC Mapping Group Compliance
--
GROUP mpcMappingGroup
DESCRIPTION
"This group is mandatory only when there is NOT a one-to-one
relationship between the MPOA Client and the LANE Client.
Optionally, a one-to-one relationship between an MPOA Client
and a LANE Client can be enforced. To enforce this
one-to-one relationship the lecIndex for the LANE Client
and the mpcIndex for the MPOA Client must have the same
value.
If this one-to-one mapping is enforced, then the
implementation
of the mpcMappingTable is unnecessary. (Since the lecIndex
and
the mpcIndex contain the same value, there is no need to
provide
a mapping of mpcIndex value to lecIndex value.)
The relationship between MPC and LEC is maintained by
ensuring that the mpcIndex is the same as the lecIndex
that is associated with it."
OBJECT mpcMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpcMappingIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mpoaMIBCompliances 3 }
mpoaMpsMibBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The implementation requirements for SNMP entities
which support MPOA Servers."
MODULE -- this module
MANDATORY-GROUPS {
mpsConfigGroup,
mpsActualGroup,
mpsStatisticsGroup,
mpsProtocolGroup,
mpsIngressCacheGroup,
mpsEgressCacheGroup
}
OBJECT mpsRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpsProtocolRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
--
-- MPS Mapping Group Compliance
--
GROUP mpsMappingGroup
DESCRIPTION
"This group is mandatory only when there is NOT a one-to-one
relationship between the MPOA Server and the LANE Client.
Optionally, a one-to-one relationship between an MPOA Server
and a LANE Client can be enforced. To enforce this
one-to-one relationship the lecIndex for the LANE Client
and the mpcIndex for the MPOA Server must have the same
value.
If this one-to-one mapping is enforced, then the
implementation
of the mpsMappingTable is unnecessary. (Since the lecIndex
and
the mpsIndex contain the same value, there is no need to
provide
a mapping of mpsIndex value to lecIndex value.)
The relationship between MPS and LEC is maintained by
ensuring that the mpsIndex is the same as the lecIndex
that is associated with it."
OBJECT mpsMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mpoaMIBCompliances 4 }
mpoaMpsMibAdvancedCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The advanced implementation requirements for SNMP entities
which support MPOA Servers."
MODULE -- this module
MANDATORY-GROUPS {
mpoaDeviceTypeGroup,
mpoaDeviceTypeMpsMacGroup,
mpsConfigGroup,
mpsActualGroup,
mpsStatisticsGroup,
mpsProtocolGroup,
mpsIngressCacheGroup,
mpsEgressCacheGroup
}
OBJECT mpsRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT mpsProtocolRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
--
-- MPS Mapping Group Compliance
--
GROUP mpsMappingGroup
DESCRIPTION
"This group is mandatory only when there is NOT a one-to-one
relationship between the MPOA Server and the LANE Client.
Optionally, a one-to-one relationship between an MPOA Server
and a LANE Client can be enforced. To enforce this
one-to-one relationship the lecIndex for the LANE Client
and the mpcIndex for the MPOA Server must have the same
value.
If this one-to-one mapping is enforced, then the
implementation
of the mpsMappingTable is unnecessary. (Since the lecIndex
and
the mpsIndex contain the same value, there is no need to
provide
a mapping of mpsIndex value to lecIndex value.)
The relationship between MPS and LEC is maintained by
ensuring that the mpsIndex is the same as the lecIndex
that is associated with it."
OBJECT mpsMappingRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { mpoaMIBCompliances 5 }
--
-- Units of Conformance
--
mpoaDeviceTypeGroup OBJECT-GROUP
OBJECTS {
deviceTypeLecIndex,
deviceTypeRemoteLecAtmAddress,
deviceTypeType,
deviceTypeMpsAtmAddress,
deviceTypeMpcAtmAddress
}
STATUS current
DESCRIPTION
"A collection of objects which exists when
the MPOA device learns the MPOA device type and
MPOA control addresses of neighboring MPOA devices
using the LANEv2 Device Type TLV."
::= { mpoaMIBGroups 1 }
mpoaDeviceTypeMpsMacGroup OBJECT-GROUP
OBJECTS { deviceTypeMpsMacAddress }
STATUS current
DESCRIPTION
"A collection of objects which is present when the
MPOA device learns the MPOA device type and MPOA
control addresses of neighboring MPOA devices using
the LANEv2 Device Type TLV."
::= { mpoaMIBGroups 2 }
mpcConfigGroup OBJECT-GROUP
OBJECTS {
mpcNextIndex,
mpcRowStatus,
mpcConfigMode,
mpcCtrlAtmAddr,
mpcSCSetupFrameCount,
mpcSCSetupFrameTime,
mpcInitialRetryTime,
mpcRetryTimeMaximum,
mpcHoldDownTime
}
STATUS current
DESCRIPTION
"A collection of objects used for creating and
configuring MPOA Clients."
::= { mpoaMIBGroups 3 }
mpcActualGroup OBJECT-GROUP
OBJECTS {
mpcActualState,
mpcDiscontinuityTime,
mpcActualConfigMode,
mpcActualSCSetupFrameCount,
mpcActualSCSetupFrameTime,
mpcActualInitialRetryTime,
mpcActualRetryTimeMaximum,
mpcActualHoldDownTime
}
STATUS current
DESCRIPTION
"A collection of objects describing the status
and operational parameters of the managed MPC."
::= { mpoaMIBGroups 4 }
mpcDataAtmAddressGroup OBJECT-GROUP
OBJECTS {
mpcDataAtmAddressRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects which describe the
set of data ATM addresses for the MPCs."
::= { mpoaMIBGroups 5 }
mpcStatisticsGroup OBJECT-GROUP
OBJECTS {
mpcStatTxMpoaResolveRequests,
mpcStatRxMpoaResolveReplyAcks,
mpcStatRxMpoaResolveReplyInsufECResources,
mpcStatRxMpoaResolveReplyInsufSCResources,
mpcStatRxMpoaResolveReplyInsufEitherResources,
mpcStatRxMpoaResolveReplyUnsupportedInetProt,
mpcStatRxMpoaResolveReplyUnsupportedMacEncaps,
mpcStatRxMpoaResolveReplyUnspecifiedOther,
mpcStatRxMpoaImpRequests,
mpcStatTxMpoaImpReplyAcks,
mpcStatTxMpoaImpReplyInsufECResources,
mpcStatTxMpoaImpReplyInsufSCResources,
mpcStatTxMpoaImpReplyInsufEitherResources,
mpcStatTxMpoaImpReplyUnsupportedInetProt,
mpcStatTxMpoaImpReplyUnsupportedMacEncaps,
mpcStatTxMpoaImpReplyUnspecifiedOther,
mpcStatTxMpoaEgressCachePurgeRequests,
mpcStatRxMpoaEgressCachePurgeReplies,
mpcStatRxMpoaKeepAlives,
mpcStatRxMpoaTriggers,
mpcStatRxMpoaDataPlanePurges,
mpcStatTxMpoaDataPlanePurges,
mpcStatRxNhrpPurgeRequests,
mpcStatTxNhrpPurgeReplies,
mpcStatRxErrUnrecognizedExtensions,
mpcStatRxErrLoopDetecteds,
mpcStatRxErrProtoAddrUnreachables,
mpcStatRxErrProtoErrors,
mpcStatRxErrSduSizeExceededs,
mpcStatRxErrInvalidExtensions,
mpcStatRxErrInvalidReplies,
mpcStatRxErrAuthenticationFailures,
mpcStatRxErrHopCountExceededs
}
STATUS current
DESCRIPTION
"A collection of objects that provide statistics
on the MPOA protocol parameters."
::= { mpoaMIBGroups 6 }
mpcProtocolGroup OBJECT-GROUP
OBJECTS {
mpcLECSValue,
mpcProtocolRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects to specify which
parameters this MPC is enabled for."
::= { mpoaMIBGroups 7 }
mpcMappingGroup OBJECT-GROUP
OBJECTS {
mpcMappingRowStatus,
mpcMappingIndex
}
STATUS current
DESCRIPTION
"A collection of objects to map from LEC to MPC"
::= { mpoaMIBGroups 8 }
mpcMpsGroup OBJECT-GROUP
OBJECTS { mpcMpsAtmAddr }
STATUS current
DESCRIPTION
"A collection of objects which aid the MPCs to track
information for all the MPSs which are known by the MPCs."
::= { mpoaMIBGroups 9 }
mpcMpsMacAddressGroup OBJECT-GROUP
OBJECTS {
mpcMpsMacAddress
}
STATUS obsolete
DESCRIPTION
"A collection of objects which aid the MPCs to track
MAC Address information for all the MPSs which are known
by the MPCs."
::= { mpoaMIBGroups 10 }
mpcIngressCacheTotalPacketGroup OBJECT-GROUP
OBJECTS {
mpcIngressCacheTxTotalPackets
}
STATUS current
DESCRIPTION
"A collection of objects which count the total
number of packets transmitted over MPC
short cuts."
::= { mpoaMIBGroups 11 }
mpcIngressCacheTotalOctetGroup OBJECT-GROUP
OBJECTS {
mpcIngressCacheTxTotalOctets
}
STATUS current
DESCRIPTION
"A collection of objects which count the total
number of octets transmitted over MPC
short cuts."
::= { mpoaMIBGroups 12 }
mpcIngressCacheGroup OBJECT-GROUP
OBJECTS {
mpcIngressCacheDestInetworkAddrType,
mpcIngressCacheDestAddr,
mpcIngressCachePrefixLen,
mpcIngressCacheDestAtmAddr,
mpcIngressCacheSrcAtmAddr,
mpcIngressCacheEntryState,
mpcIngressCacheEgressCacheTagValid,
mpcIngressCacheEgressCacheTag,
mpcIngressCacheLastNhrpCieCode,
mpcIngressCacheSigErrCode,
mpcIngressCacheRetries,
mpcIngressCacheTimeUntilNextResolutionRequest,
mpcIngressCacheHoldingTime,
mpcIngressCacheServiceCategory
}
STATUS current
DESCRIPTION
"A collection of objects used to monitor the
MPOA ingress cache."
::= { mpoaMIBGroups 13 }
mpcEgressCacheTotalPacketGroup OBJECT-GROUP
OBJECTS {
mpcEgressCacheRxTotalPackets
}
STATUS current
DESCRIPTION
"A collection of objects which count the total
number of packets received by MPC short cuts."
::= { mpoaMIBGroups 14 }
mpcEgressCacheTotalOctetGroup OBJECT-GROUP
OBJECTS {
mpcEgressCacheRxTotalOctets
}
STATUS current
DESCRIPTION
"A collection of objects which count the total
number of octets received by MPC short cuts."
::= { mpoaMIBGroups 15 }
mpcEgressCacheGroup OBJECT-GROUP
OBJECTS {
mpcEgressCacheId,
mpcEgressCacheInetworkAddrType,
mpcEgressCacheIDestAddr,
mpcEgressCachePrefixLen,
mpcEgressCacheEntryState,
mpcEgressCacheEgressCacheTagValid,
mpcEgressCacheEgressCacheTag,
mpcEgressCacheHoldTime,
mpcEgressCacheDataLinkHeader,
mpcEgressCacheIngressMpcDataAtmAddr,
mpcEgressCacheLecIndex,
mpcEgressCacheServiceCategory
}
STATUS current
DESCRIPTION
"A collection of objects used to monitor the
MPOA egress cache."
::= { mpoaMIBGroups 16 }
mpsConfigGroup OBJECT-GROUP
OBJECTS {
mpsNextIndex,
mpsRowStatus,
mpsConfigMode,
mpsCtrlAtmAddr,
mpsKeepAliveTime,
mpsKeepAliveLifeTime,
mpsInitialRetryTime,
mpsRetryTimeMaximum,
mpsGiveupTime,
mpsDefaultHoldingTime
}
STATUS current
DESCRIPTION
"A collection of objects used for creating and
configuring MPOA Servers."
::= { mpoaMIBGroups 17 }
mpsActualGroup OBJECT-GROUP
OBJECTS {
mpsActualState,
mpsDiscontinuityTime,
mpsActualConfigMode,
mpsActualKeepAlive,
mpsActualKeepAliveLifeTime,
mpsActualInitialRetryTime,
mpsActualRetryTimeMaximum,
mpsActualGiveupTime,
mpsActualDefaultHoldingTime
}
STATUS current
DESCRIPTION
"A collection of objects describing the status
and operational parameters of the managed MPS."
::= { mpoaMIBGroups 18 }
mpsStatisticsGroup OBJECT-GROUP
OBJECTS {
mpsStatRxMpoaResolveRequests,
mpsStatTxMpoaResolveReplyAcks,
mpsStatTxMpoaResolveReplyInsufECResources,
mpsStatTxMpoaResolveReplyInsufSCResources,
mpsStatTxMpoaResolveReplyInsufEitherResources,
mpsStatTxMpoaResolveReplyUnsupportedInetProt,
mpsStatTxMpoaResolveReplyUnsupportedMacEncaps,
mpsStatTxMpoaResolveReplyUnspecifiedOther,
mpsStatTxMpoaResolveReplyOther,
mpsStatGiveupTimeExpireds,
mpsStatTxMpoaImpRequests,
mpsStatRxMpoaImpReplyAcks,
mpsStatRxMpoaImpReplyInsufECResources,
mpsStatRxMpoaImpReplyInsufSCResources,
mpsStatRxMpoaImpReplyInsufEitherResources,
mpsStatRxMpoaImpReplyUnsupportedInetProt,
mpsStatRxMpoaImpReplyUnsupportedMacEncaps,
mpsStatRxMpoaImpReplyUnspecifiedOther,
mpsStatRxMpoaImpReplyOther,
mpsStatRxMpoaEgressCachePurgeRequests,
mpsStatTxMpoaEgressCachePurgeReplies,
mpsStatTxMpoaTriggers,
mpsStatTxNhrpResolveRequests,
mpsStatRxNhrpResolveReplies,
mpsStatRxNhrpResolveRequests,
mpsStatTxNhrpResolveReplies
}
STATUS current
DESCRIPTION
"A collection of objects that provide statistics
on the MPOA Server protocol parameters."
::= { mpoaMIBGroups 19 }
mpsProtocolGroup OBJECT-GROUP
OBJECTS {
mpsLECSValue,
mpsProtocolRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects to specify which
parameters this MPS is enabled for."
::= { mpoaMIBGroups 20 }
mpsMappingGroup OBJECT-GROUP
OBJECTS {
mpsMappingRowStatus,
mpsMappingIndex
}
STATUS current
DESCRIPTION
"A collection of objects to map from MPSs to LECs."
::= { mpoaMIBGroups 21 }
mpsMpcGroup OBJECT-GROUP
OBJECTS { mpsMpcCtrlAtmAddr }
STATUS current
DESCRIPTION
"A collection of objects which aid the MPSs to track
information for all the MPCs which are known by the
MPSs."
::= {mpoaMIBGroups 22 }
mpsIngressCacheGroup OBJECT-GROUP
OBJECTS {
mpsIngressCacheDestInternetworkAddrType,
mpsIngressCacheDestAddr,
mpsIngressCachePrefixLen,
mpsIngressCacheEntryState,
mpsIngressCacheSrcInternetworkAddrType,
mpsIngressCacheSrcAddr,
mpsIngressCacheSourceMpcCtrlAtmAddr,
mpsIngressCacheResolvedAtmAddr,
mpsIngressCacheHoldTime,
mpsIngressCacheMpoaRequestId,
mpsIngressCacheNhrpRequestId,
mpsIngressCacheServiceCategory
}
STATUS current
DESCRIPTION
"A collection of objects to monitor the MPS
ingress cache."
::= { mpoaMIBGroups 23 }
mpsEgressCacheGroup OBJECT-GROUP
OBJECTS {
mpsEgressCacheId,
mpsEgressCacheDestInternetworkAddrType,
mpsEgressCacheDestAddr,
mpsEgressCachePrefixLen,
mpsEgressCacheHoldTime,
mpsEgressCacheEntryState,
mpsEgressCacheDataLinkHeader,
mpsEgressCacheElanId,
mpsEgressCacheSourceClientAtmAddr,
mpsEgressCacheNhrpRequestId,
mpsEgressCacheMpoaRequestId,
mpsEgressCacheServiceCategory,
mpsEgressCacheNextHopInternetworkAddrType,
mpsEgressCacheNextHopAddr
}
STATUS current
DESCRIPTION
"A collection of objects to monitor MPS's egress
cache parameters."
::= { mpoaMIBGroups 24 }
mpcMpsMultipleMacAddressGroup OBJECT-GROUP
OBJECTS {
mpcMpsFlowDetectMacAddress
}
STATUS current
DESCRIPTION
"A collection of objects which aid the MPCs to track
MAC Address information for all the MPSs which are
used during flow detection by the MPCs."
::= { mpoaMIBGroups 25 }
END
Reference in New Issue View Git Blame Copy Permalink