MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/FC-MGMT-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

2219 lines
74 KiB
Plaintext
Raw Blame History

FC-MGMT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Integer32, Unsigned32, Counter32, Counter64, transmission
FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
TruthValue, TEXTUAL-CONVENTION
FROM SNMPv2-TC
ifIndex FROM IF-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
fcMgmtMIB MODULE-IDENTITY
LAST-UPDATED "200504260000Z" -- 26 April 2005
ORGANIZATION "IETF IPS (IP-Storage) Working Group"
CONTACT-INFO
" Keith McCloghrie
Cisco Systems, Inc.
Tel: +1 408 526-5260
E-mail: kzm@cisco.com
Postal: 170 West Tasman Drive
San Jose, CA USA 95134
"
DESCRIPTION
"This module defines management information specific to
Fibre Channel-attached devices.
Copyright (C) The Internet Society (2005). This version
of this MIB module is part of RFC 4044; see the RFC
itself for full legal notices."
REVISION "200504260000Z" -- 26 April 2005
DESCRIPTION
"Initial version of the Fibre Channel Mgmt MIB module."
::= { transmission 56 }
fcmgmtObjects OBJECT IDENTIFIER ::= { fcMgmtMIB 1 }
fcmgmtNotifications OBJECT IDENTIFIER ::= { fcMgmtMIB 2 }
fcmgmtNotifPrefix OBJECT IDENTIFIER ::= { fcmgmtNotifications 0 }
fcmgmtConformance OBJECT IDENTIFIER ::= { fcMgmtMIB 3 }
--********************************
-- Textual Conventions
--
FcNameIdOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The World Wide Name (WWN) associated with a Fibre Channel
(FC) entity. WWNs were initially defined as 64-bits in
length. The latest definition (for future use) is 128-bits
long. The zero-length string value is used in
circumstances in which the WWN is unassigned/unknown."
SYNTAX OCTET STRING (SIZE(0 | 8 | 16))
FcAddressIdOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A Fibre Channel Address ID, a 24-bit value unique within
the address space of a Fabric. The zero-length string value
is used in circumstances in which the WWN is
unassigned/unknown."
SYNTAX OCTET STRING (SIZE(0 | 3))
FcDomainIdOrZero ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Domain Id (of an FC switch), or zero if the no Domain
Id has been assigned."
SYNTAX Integer32 (0..239)
FcPortType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The type of a Fibre Channel port, as indicated by the use
of the appropriate value assigned by IANA."
REFERENCE
"The IANA-maintained registry for
Fibre Channel port types (http://www.iana.org/)."
SYNTAX Unsigned32
FcClasses ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of Fibre Channel classes of service."
REFERENCE
"Classes of service are described in FC-FS Section 13."
SYNTAX BITS { classF(0), class1(1), class2(2), class3(3),
class4(4), class5(5), class6(6) }
FcBbCredit ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The buffer-to-buffer credit of an FC port."
SYNTAX Integer32 (0..32767)
FcBbCreditModel ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The buffer-to-buffer credit model of an Fx_Port."
SYNTAX INTEGER { regular(1), alternate (2) }
FcDataFieldSize ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The Receive Data Field Size associated with an FC port."
SYNTAX Integer32 (128..2112)
FcUnitFunctions ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A set of functions that a Fibre Channel Interconnect
Element or Platform might perform. A value with no bits set
indicates the function(s) are unknown. The individual bits
have the following meanings:
other - none of the following.
hub - a device that interconnects L_Ports, but does not
operate as an FL_Port.
switch - a fabric element conforming to the Fibre Channel
switch fabric set of standards (e.g., [FC-SW-3]).
bridge - a device that encapsulates Fibre Channel frames
within another protocol (e.g., [FC-BB], FC-BB-2).
gateway - a device that converts an FC-4 to another protocol
(e.g., FCP to iSCSI).
host - a computer system that provides end users with
services such as computation and storage access.
storageSubsys - an integrated collection of storage
controllers, storage devices, and necessary software that
provides storage services to one or more hosts.
storageAccessDev - a device that provides storage management
and access for heterogeneous hosts and heterogeneous devices
(e.g., medium changer).
nas - a device that connects to a network and provides file
access services.
wdmux - a device that modulates/demodulates each of several
data streams (e.g., Fibre Channel protocol data streams)
onto/from a different part of the light spectrum in an
optical fiber.
storageDevice - a disk/tape/etc. device (without the
controller and/or software required for it to be a
'storageSubsys')."
SYNTAX BITS {
other(0), -- none of the following
hub(1),
switch(2),
bridge(3),
gateway(4),
host(5),
storageSubsys(6),
storageAccessDev(7),
nas(8),
wdmux(9),
storageDevice(10)
}
--********************************
-- MIB object definitions
--
fcmInstanceTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about the local Fibre Channel management
instances."
::= { fcmgmtObjects 1 }
fcmInstanceEntry OBJECT-TYPE
SYNTAX FcmInstanceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of attributes for a particular local Fibre Channel
management instance."
INDEX { fcmInstanceIndex }
::= { fcmInstanceTable 1 }
FcmInstanceEntry ::=
SEQUENCE {
fcmInstanceIndex Unsigned32,
fcmInstanceWwn FcNameIdOrZero,
fcmInstanceFunctions FcUnitFunctions,
fcmInstancePhysicalIndex Integer32,
fcmInstanceSoftwareIndex Integer32,
fcmInstanceStatus INTEGER,
fcmInstanceTextName SnmpAdminString,
fcmInstanceDescr SnmpAdminString,
fcmInstanceFabricId FcNameIdOrZero
}
fcmInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value that uniquely identifies this
instance amongst all local Fibre Channel management
instances.
It is mandatory to keep this value constant between restarts
of the agent, and to make every possible effort to keep it
constant across restarts (but note, it is unrealistic to
expect it to remain constant across all re-configurations of
the local system, e.g., across the replacement of all non-
volatile storage)."
::= { fcmInstanceEntry 1 }
fcmInstanceWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the instance has one (or more) WWN(s), then this object
contains that (or one of those) WWN(s).
If the instance does not have a WWN associated with it, then
this object contains the zero-length string."
::= { fcmInstanceEntry 2 }
fcmInstanceFunctions OBJECT-TYPE
SYNTAX FcUnitFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"One (or more) Fibre Channel unit functions being performed
by this instance."
::= { fcmInstanceEntry 3 }
fcmInstancePhysicalIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this management instance corresponds to a physical
component (or to a hierarchy of physical components)
identified by the Entity-MIB, then this object's value is
the value of the entPhysicalIndex of that component (or of
the component at the root of that hierarchy). If there is
no correspondence to a physical component (or no component
that has an entPhysicalIndex value), then the value of this
object is zero."
REFERENCE
"entPhysicalIndex is defined in the Entity MIB, RFC 2737."
::= { fcmInstanceEntry 4 }
fcmInstanceSoftwareIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If this management instance corresponds to an installed
software module identified in the Host Resources MIB, then
this object's value is the value of the hrSWInstalledIndex
of that module. If there is no correspondence to an
installed software module (or no module that has a
hrSWInstalledIndex value), then the value of this object is
zero."
REFERENCE
"hrSWInstalledIndex is defined in the Host Resources MIB,
RFC 2790"
::= { fcmInstanceEntry 5 }
fcmInstanceStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ok(2), -- able to operate correctly
warning(3), -- needs attention
failed(4) -- something has failed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Overall status of the Fibre Channel entity/entities managed
by this management instance. The value should reflect the
most serious status of such entities."
::= { fcmInstanceEntry 6 }
fcmInstanceTextName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..79))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual name for this management instance and the Fibre
Channel entity/entities that it is managing."
::= { fcmInstanceEntry 7 }
fcmInstanceDescr OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A textual description of this management instance and the
Fibre Channel entity/entities that it is managing."
::= { fcmInstanceEntry 8 }
fcmInstanceFabricId OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The globally unique Fabric Identifier that identifies the
fabric to which the Fibre Channel entity/entities managed by
this management instance are connected, or, of which they
are a part. This is typically the Node WWN of the principal
switch of a Fibre Channel fabric. The zero-length string
indicates that the fabric identifier is unknown (or not
applicable).
In the event that the Fibre Channel entity/entities managed
by this management instance is/are connected to multiple
fabrics, then this object records the first (known) one."
::= { fcmInstanceEntry 9 }
--********************************
-- The Fibre Channel Switch Table
--
fcmSwitchTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of information about Fibre Channel switches that
are managed by Fibre Channel management instances. Each
Fibre Channel management instance can manage one or more
Fibre Channel switches."
::= { fcmgmtObjects 2 }
fcmSwitchEntry OBJECT-TYPE
SYNTAX FcmSwitchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a particular Fibre Channel switch that is
managed by the management instance given by
fcmInstanceIndex."
INDEX { fcmInstanceIndex, fcmSwitchIndex }
::= { fcmSwitchTable 1 }
FcmSwitchEntry ::=
SEQUENCE {
fcmSwitchIndex Unsigned32,
fcmSwitchDomainId FcDomainIdOrZero,
fcmSwitchPrincipal TruthValue,
fcmSwitchWWN FcNameIdOrZero
}
fcmSwitchIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer that uniquely identifies a Fibre
Channel switch amongst those managed by one Fibre Channel
management instance.
It is mandatory to keep this value constant between restarts
of the agent, and to make every possible effort to keep it
constant across restarts."
::= { fcmSwitchEntry 1 }
fcmSwitchDomainId OBJECT-TYPE
SYNTAX FcDomainIdOrZero
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Domain Id of this switch. A value of zero indicates
that a switch has not (yet) been assigned a Domain Id."
::= { fcmSwitchEntry 2 }
fcmSwitchPrincipal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this switch is the principal
switch within its fabric."
::= { fcmSwitchEntry 3 }
fcmSwitchWWN OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The World Wide Name of this switch."
::= { fcmSwitchEntry 4 }
--********************************
-- The Fibre Channel Port Table
--
fcmPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about Fibre Channel ports. Each Fibre Channel
port is represented by one entry in the IF-MIB's ifTable."
REFERENCE
"RFC 2863, The Interfaces Group MIB, June 2000."
::= { fcmgmtObjects 3 }
fcmPortEntry OBJECT-TYPE
SYNTAX FcmPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about a specific port."
INDEX { ifIndex }
::= { fcmPortTable 1 }
FcmPortEntry ::=
SEQUENCE {
fcmPortInstanceIndex Unsigned32,
fcmPortWwn FcNameIdOrZero,
fcmPortNodeWwn FcNameIdOrZero,
fcmPortAdminType FcPortType,
fcmPortOperType FcPortType,
fcmPortFcCapClass FcClasses,
fcmPortFcOperClass FcClasses,
fcmPortTransmitterType INTEGER,
fcmPortConnectorType INTEGER,
fcmPortSerialNumber SnmpAdminString,
fcmPortPhysicalNumber Unsigned32,
fcmPortAdminSpeed INTEGER,
fcmPortCapProtocols BITS,
fcmPortOperProtocols BITS
}
fcmPortInstanceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of fcmInstanceIndex by which the Fibre Channel
management instance, which manages this port, is identified
in the fcmInstanceTable."
::= { fcmPortEntry 1 }
fcmPortWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The World Wide Name of the port, or the zero-length string
if the port does not have a WWN."
::= { fcmPortEntry 2 }
fcmPortNodeWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The World Wide Name of the Node that contains this port, or
the zero-length string if the port does not have a node
WWN."
::= { fcmPortEntry 3 }
fcmPortAdminType OBJECT-TYPE
SYNTAX FcPortType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The administratively desired type of this port."
::= { fcmPortEntry 4 }
fcmPortOperType OBJECT-TYPE
SYNTAX FcPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current operational type of this port."
::= { fcmPortEntry 5 }
fcmPortFcCapClass OBJECT-TYPE
SYNTAX FcClasses
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The classes of service capability of this port."
::= { fcmPortEntry 6 }
fcmPortFcOperClass OBJECT-TYPE
SYNTAX FcClasses
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The classes of service that are currently operational on
this port. For an FL_Port, this is the union of the classes
being supported across all attached NL_Ports."
::= { fcmPortEntry 7 }
fcmPortTransmitterType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
other(2),
shortwave850nm(3),
longwave1550nm(4),
longwave1310nm(5),
electrical(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The technology of the port transceiver."
REFERENCE
"FC-GS-3, section 6.1.2.2.3"
::= { fcmPortEntry 8 }
fcmPortConnectorType OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
other(2),
gbic(3),
embedded(4),
glm(5),
gbicSerialId(6),
gbicNoSerialId(7),
sfpSerialId(8),
sfpNoSerialId(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The module type of the port connector. This object refers
to the hardware implementation of the port. It will be
'embedded' if the hardware equivalent to Gigabit interface
card (GBIC) is part of the line card and is unremovable. It
will be 'glm' if it's a gigabit link module (GLM). It will
be 'gbicSerialId' if the GBIC serial id can be read, else it
will be 'gbicNoSerialId'. It will be 'sfpSerialId' if the
small form factor (SFP) pluggable GBICs serial id can be
read, else it will be 'sfpNoSerialId'."
REFERENCE
"FC-GS-3, section 6.1.2.2.4"
::= { fcmPortEntry 9 }
fcmPortSerialNumber OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The serial number associated with the port (e.g., for a
GBIC). If not applicable, the object's value is a zero-
length string."
REFERENCE
"FC-GS-3, section 6.1.2.2.4"
::= { fcmPortEntry 10 }
fcmPortPhysicalNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the port's 'Physical Port Number' as defined by
GS-3."
REFERENCE
"FC-GS-3, section 6.1.2.2.5"
::= { fcmPortEntry 11 }
fcmPortAdminSpeed OBJECT-TYPE
SYNTAX INTEGER {
auto(1),
eighthGbs(2), -- 125Mbs
quarterGbs(3), -- 250Mbs
halfGbs(4), -- 500Mbs
oneGbs(5), -- 1Gbs
twoGbs(6), -- 2Gbs
fourGbs(7), -- 4Gbs
tenGbs(8) -- 10Gbs
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The speed of the interface:
'auto' - auto-negotiation
'tenGbs' - 10Gbs
'fourGbs' - 4Gbs
'twoGbs' - 2Gbs
'oneGbs' - 1Gbs
'halfGbs' - 500Mbs
'quarterGbs' - 250Mbs
'eighthGbs' - 125Mbs"
::= { fcmPortEntry 12 }
fcmPortCapProtocols OBJECT-TYPE
SYNTAX BITS {
unknown(0),
loop(1),
fabric(2),
scsi(3),
tcpIp(4),
vi(5),
ficon(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit mask specifying the higher level protocols that are
capable of running over this port. Note that for generic
Fx_Ports, E_Ports, and B_Ports, this object will indicate
all protocols."
::= { fcmPortEntry 13 }
fcmPortOperProtocols OBJECT-TYPE
SYNTAX BITS {
unknown(0),
loop(1),
fabric(2),
scsi(3),
tcpIp(4),
vi(5),
ficon(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A bit mask specifying the higher level protocols that are
currently operational on this port. For Fx_Ports, E_Ports,
and B_Ports, this object will typically have the value
'unknown'."
::= { fcmPortEntry 14 }
--********************************
-- Port Statistics
--
fcmPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of statistics for Fibre Channel ports."
::= { fcmgmtObjects 4 }
fcmPortStatsEntry OBJECT-TYPE
SYNTAX FcmPortStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing statistics for a Fibre Channel port.
If any counter in this table suffers a discontinuity, the
value of ifCounterDiscontinuityTime (defined in the IF-MIB)
must be updated."
REFERENCE "The Interfaces Group MIB, RFC 2863, June 2000."
AUGMENTS { fcmPortEntry }
::= { fcmPortStatsTable 1 }
FcmPortStatsEntry ::=
SEQUENCE {
fcmPortBBCreditZeros Counter64,
fcmPortFullInputBuffers Counter64,
fcmPortClass2RxFrames Counter64,
fcmPortClass2RxOctets Counter64,
fcmPortClass2TxFrames Counter64,
fcmPortClass2TxOctets Counter64,
fcmPortClass2Discards Counter64,
fcmPortClass2RxFbsyFrames Counter64,
fcmPortClass2RxPbsyFrames Counter64,
fcmPortClass2RxFrjtFrames Counter64,
fcmPortClass2RxPrjtFrames Counter64,
fcmPortClass2TxFbsyFrames Counter64,
fcmPortClass2TxPbsyFrames Counter64,
fcmPortClass2TxFrjtFrames Counter64,
fcmPortClass2TxPrjtFrames Counter64,
fcmPortClass3RxFrames Counter64,
fcmPortClass3RxOctets Counter64,
fcmPortClass3TxFrames Counter64,
fcmPortClass3TxOctets Counter64,
fcmPortClass3Discards Counter64,
fcmPortClassFRxFrames Counter32,
fcmPortClassFRxOctets Counter32,
fcmPortClassFTxFrames Counter32,
fcmPortClassFTxOctets Counter32,
fcmPortClassFDiscards Counter32
}
fcmPortBBCreditZeros OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions in/out of the buffer-to-buffer
credit zero state. The other side is not providing any
credit."
::= { fcmPortStatsEntry 1 }
fcmPortFullInputBuffers OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occurrences when all input buffers of a port
were full and outbound buffer-to-buffer credit transitioned
to zero, i.e., there became no credit to provide to other
side."
::= { fcmPortStatsEntry 2 }
fcmPortClass2RxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames received at this port."
::= { fcmPortStatsEntry 3 }
fcmPortClass2RxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames received
at this port."
::= { fcmPortStatsEntry 4 }
fcmPortClass2TxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames transmitted out of this port."
::= { fcmPortStatsEntry 5 }
fcmPortClass2TxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames
transmitted out of this port."
::= { fcmPortStatsEntry 6 }
fcmPortClass2Discards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames that were discarded upon
reception at this port."
::= { fcmPortStatsEntry 7 }
fcmPortClass2RxFbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when either the
fabric or the destination port is temporarily busy. Note
that this counter will never increment for an F_Port."
::= { fcmPortStatsEntry 8 }
fcmPortClass2RxPbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when the
destination port is temporarily busy."
::= { fcmPortStatsEntry 9 }
fcmPortClass2RxFrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was returned to this port as
a result of a Class 2 frame that was rejected by the fabric.
Note that this counter will never increment for an F_Port."
::= { fcmPortStatsEntry 10 }
fcmPortClass2RxPrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was returned to this port as
a result of a Class 2 frame that was rejected at the
destination N_Port."
::= { fcmPortStatsEntry 11 }
fcmPortClass2TxFbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because either the Fabric or the destination port was
temporarily busy. Note that this counter will never
increment for an N_Port."
::= { fcmPortStatsEntry 12 }
fcmPortClass2TxPbsyFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because the destination port was temporarily busy. Note
that this counter will never increment for an F_Port."
::= { fcmPortStatsEntry 13 }
fcmPortClass2TxFrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was generated by this port
as a result of a Class 2 frame being rejected by the fabric.
Note that this counter will never increment for an N_Port."
::= { fcmPortStatsEntry 14 }
fcmPortClass2TxPrjtFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was generated by this port
as a result of a Class 2 frame being rejected at the
destination N_Port. Note that this counter will never
increment for an F_Port."
::= { fcmPortStatsEntry 15 }
fcmPortClass3RxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames received at this port."
::= { fcmPortStatsEntry 16 }
fcmPortClass3RxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames received
at this port."
::= { fcmPortStatsEntry 17 }
fcmPortClass3TxFrames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames transmitted out of this port."
::= { fcmPortStatsEntry 18 }
fcmPortClass3TxOctets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames
transmitted out of this port."
::= { fcmPortStatsEntry 19 }
fcmPortClass3Discards OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames that were discarded upon
reception at this port."
::= { fcmPortStatsEntry 20 }
fcmPortClassFRxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames received at this port."
::= { fcmPortStatsEntry 21 }
fcmPortClassFRxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class F frames received
at this port."
::= { fcmPortStatsEntry 22 }
fcmPortClassFTxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames transmitted out of this port."
::= { fcmPortStatsEntry 23 }
fcmPortClassFTxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class F frames
transmitted out of this port."
::= { fcmPortStatsEntry 24 }
fcmPortClassFDiscards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class F frames that were discarded upon
reception at this port."
::= { fcmPortStatsEntry 25 }
--********************************
-- Port Low-capacity Statistics
--
-- these are Counter32 "low-capacity" counters for systems
-- that do not support Counter64's
fcmPortLcStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmPortLcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of Counter32-based statistics for systems that do
not support Counter64."
::= { fcmgmtObjects 5 }
fcmPortLcStatsEntry OBJECT-TYPE
SYNTAX FcmPortLcStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing low-capacity (i.e., based on Counter32)
statistics for a Fibre Channel port. If any counter in this
table suffers a discontinuity, the value of
ifCounterDiscontinuityTime (defined in the IF-MIB) must be
updated."
REFERENCE "The Interfaces Group MIB, RFC 2863, June 2000."
AUGMENTS { fcmPortEntry }
::= { fcmPortLcStatsTable 1 }
FcmPortLcStatsEntry ::=
SEQUENCE {
fcmPortLcBBCreditZeros Counter32,
fcmPortLcFullInputBuffers Counter32,
fcmPortLcClass2RxFrames Counter32,
fcmPortLcClass2RxOctets Counter32,
fcmPortLcClass2TxFrames Counter32,
fcmPortLcClass2TxOctets Counter32,
fcmPortLcClass2Discards Counter32,
fcmPortLcClass2RxFbsyFrames Counter32,
fcmPortLcClass2RxPbsyFrames Counter32,
fcmPortLcClass2RxFrjtFrames Counter32,
fcmPortLcClass2RxPrjtFrames Counter32,
fcmPortLcClass2TxFbsyFrames Counter32,
fcmPortLcClass2TxPbsyFrames Counter32,
fcmPortLcClass2TxFrjtFrames Counter32,
fcmPortLcClass2TxPrjtFrames Counter32,
fcmPortLcClass3RxFrames Counter32,
fcmPortLcClass3RxOctets Counter32,
fcmPortLcClass3TxFrames Counter32,
fcmPortLcClass3TxOctets Counter32,
fcmPortLcClass3Discards Counter32
}
fcmPortLcBBCreditZeros OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transitions in/out of the buffer-to-buffer
credit zero state. The other side is not providing any
credit."
::= { fcmPortLcStatsEntry 1 }
fcmPortLcFullInputBuffers OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occurrences when all input buffers of a port
were full and outbound buffer-to-buffer credit transitioned
to zero, i.e., there became no credit to provide to other
side."
::= { fcmPortLcStatsEntry 2 }
fcmPortLcClass2RxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames received at this port."
::= { fcmPortLcStatsEntry 3 }
fcmPortLcClass2RxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames received
at this port."
::= { fcmPortLcStatsEntry 4 }
fcmPortLcClass2TxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames transmitted out of this port."
::= { fcmPortLcStatsEntry 5 }
fcmPortLcClass2TxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 2 frames
transmitted out of this port."
::= { fcmPortLcStatsEntry 6 }
fcmPortLcClass2Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 2 frames that were discarded upon
reception at this port."
::= { fcmPortLcStatsEntry 7 }
fcmPortLcClass2RxFbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when either the
fabric or the destination port is temporarily busy. Note
that this counter will never increment for an F_Port."
::= { fcmPortLcStatsEntry 8 }
fcmPortLcClass2RxPbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was returned to this port as
a result of a Class 2 frame that could not be delivered to
the other end of the link. This can occur when the
destination port is temporarily busy."
::= { fcmPortLcStatsEntry 9 }
fcmPortLcClass2RxFrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was returned to this port as
a result of a Class 2 frame that was rejected by the fabric.
Note that this counter will never increment for an F_Port."
::= { fcmPortLcStatsEntry 10 }
fcmPortLcClass2RxPrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was returned to this port as
a result of a Class 2 frame that was rejected at the
destination N_Port."
::= { fcmPortLcStatsEntry 11 }
fcmPortLcClass2TxFbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because either the Fabric or the destination port was
temporarily busy. Note that this counter will never
increment for an N_Port."
::= { fcmPortLcStatsEntry 12 }
fcmPortLcClass2TxPbsyFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_BSY was generated by this port
as a result of a Class 2 frame that could not be delivered
because the destination port was temporarily busy. Note
that this counter will never increment for an F_Port."
::= { fcmPortLcStatsEntry 13 }
fcmPortLcClass2TxFrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that F_RJT was generated by this port
as a result of a Class 2 frame being rejected by the fabric.
Note that this counter will never increment for an N_Port."
::= { fcmPortLcStatsEntry 14 }
fcmPortLcClass2TxPrjtFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times that P_RJT was generated by this port
as a result of a Class 2 frame being rejected at the
destination N_Port. Note that this counter will never
increment for an F_Port."
::= { fcmPortLcStatsEntry 15 }
fcmPortLcClass3RxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames received at this port."
::= { fcmPortLcStatsEntry 16 }
fcmPortLcClass3RxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames received
at this port."
::= { fcmPortLcStatsEntry 17 }
fcmPortLcClass3TxFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames transmitted out of this port."
::= { fcmPortLcStatsEntry 18 }
fcmPortLcClass3TxOctets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of octets contained in Class 3 frames
transmitted out of this port."
::= { fcmPortLcStatsEntry 19 }
fcmPortLcClass3Discards OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Class 3 frames that were discarded upon
reception at this port."
::= { fcmPortLcStatsEntry 20 }
--********************************
-- Port Error Counters
--
fcmPortErrorsTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmPortErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error counters for Fibre Channel ports."
::= { fcmgmtObjects 6 }
fcmPortErrorsEntry OBJECT-TYPE
SYNTAX FcmPortErrorsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Error counters for a Fibre Channel port. If any counter in
this table suffers a discontinuity, the value of
ifCounterDiscontinuityTime (defined in the IF-MIB) must be
updated."
REFERENCE "The Interfaces Group MIB, RFC 2863, June 2000."
AUGMENTS { fcmPortEntry }
::= { fcmPortErrorsTable 1 }
FcmPortErrorsEntry ::=
SEQUENCE {
fcmPortRxLinkResets Counter32,
fcmPortTxLinkResets Counter32,
fcmPortLinkResets Counter32,
fcmPortRxOfflineSequences Counter32,
fcmPortTxOfflineSequences Counter32,
fcmPortLinkFailures Counter32,
fcmPortLossofSynchs Counter32,
fcmPortLossofSignals Counter32,
fcmPortPrimSeqProtocolErrors Counter32,
fcmPortInvalidTxWords Counter32,
fcmPortInvalidCRCs Counter32,
fcmPortInvalidOrderedSets Counter32,
fcmPortFrameTooLongs Counter32,
fcmPortTruncatedFrames Counter32,
fcmPortAddressErrors Counter32,
fcmPortDelimiterErrors Counter32,
fcmPortEncodingDisparityErrors Counter32,
fcmPortOtherErrors Counter32
}
fcmPortRxLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link Reset (LR) Primitive Sequences
received."
::= { fcmPortErrorsEntry 1 }
fcmPortTxLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Link Reset (LR) Primitive Sequences
transmitted."
::= { fcmPortErrorsEntry 2 }
fcmPortLinkResets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times the reset link protocol was initiated
on this port. This includes the number of Loop
Initialization Primitive (LIP) events on an arbitrated loop
port."
::= { fcmPortErrorsEntry 3 }
fcmPortRxOfflineSequences OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline (OLS) Primitive Sequences received at
this port."
::= { fcmPortErrorsEntry 4 }
fcmPortTxOfflineSequences OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Offline (OLS) Primitive Sequences transmitted
by this port."
::= { fcmPortErrorsEntry 5 }
fcmPortLinkFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of link failures. This count is part of FC-PH's
Link Error Status Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8 [FC-PH]."
::= { fcmPortErrorsEntry 6 }
fcmPortLossofSynchs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of instances of synchronization loss detected at
this port. This count is part of FC-PH's Link Error Status
Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { fcmPortErrorsEntry 7 }
fcmPortLossofSignals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of instances of signal loss detected at this
port. This count is part of FC-PH's Link Error Status Block
(LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { fcmPortErrorsEntry 8 }
fcmPortPrimSeqProtocolErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of primitive sequence protocol errors detected
at this port. This count is part of FC-PH's Link Error
Status Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { fcmPortErrorsEntry 9 }
fcmPortInvalidTxWords OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid transmission words received at this
port. This count is part of FC-PH's Link Error Status Block
(LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { fcmPortErrorsEntry 10 }
fcmPortInvalidCRCs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received with an invalid CRC. This
count is part of FC-PH's Link Error Status Block (LESB)."
REFERENCE
"FC-PH, rev 4.3, 1 June 1994, section 29.8."
::= { fcmPortErrorsEntry 11 }
fcmPortInvalidOrderedSets OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid ordered sets received at this port."
::= { fcmPortErrorsEntry 12 }
fcmPortFrameTooLongs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received at this port for which the
frame length was greater than what was agreed to in
FLOGI/PLOGI. This could be caused by losing the end of
frame delimiter."
::= { fcmPortErrorsEntry 13 }
fcmPortTruncatedFrames OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received at this port for which the
frame length was less than the minimum indicated by the
frame header - normally 24 bytes, but it could be more if
the DFCTL field indicates an optional header should have
been present."
::= { fcmPortErrorsEntry 14 }
fcmPortAddressErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of frames received with unknown addressing; for
example, an unknown SID or DID."
::= { fcmPortErrorsEntry 15 }
fcmPortDelimiterErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of invalid frame delimiters received at this
port. An example is a frame with a class 2 start and a
class 3 at the end."
::= { fcmPortErrorsEntry 16 }
fcmPortEncodingDisparityErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of encoding disparity errors received at this
port."
::= { fcmPortErrorsEntry 17 }
fcmPortOtherErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of errors that were detected on this port but
not counted by any other error counter in this row."
::= { fcmPortErrorsEntry 18 }
--********************************
-- The Fibre Channel Fx_Port Table
--
fcmFxPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmFxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional information about Fibre Channel ports that is
specific to Fx_Ports. This table will contain one entry for
each fcmPortTable entry that represents an Fx_Port."
::= { fcmgmtObjects 7 }
fcmFxPortEntry OBJECT-TYPE
SYNTAX FcmFxPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about a specific Fx_Port."
INDEX { ifIndex }
::= { fcmFxPortTable 1 }
FcmFxPortEntry ::=
SEQUENCE {
fcmFxPortRatov Unsigned32,
fcmFxPortEdtov Unsigned32,
fcmFxPortRttov Unsigned32,
fcmFxPortHoldTime Unsigned32,
fcmFxPortCapBbCreditMax FcBbCredit,
fcmFxPortCapBbCreditMin FcBbCredit,
fcmFxPortCapDataFieldSizeMax FcDataFieldSize,
fcmFxPortCapDataFieldSizeMin FcDataFieldSize,
fcmFxPortCapClass2SeqDeliv TruthValue,
fcmFxPortCapClass3SeqDeliv TruthValue,
fcmFxPortCapHoldTimeMax Unsigned32,
fcmFxPortCapHoldTimeMin Unsigned32
}
fcmFxPortRatov OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Resource_Allocation_Timeout Value configured for this
Fx_Port. This is used as the timeout value for determining
when to reuse an Nx_Port resource such as a
Recovery_Qualifier. It represents the Error_Detect_Timeout
value (see fcmFxPortEdtov) plus twice the maximum time that
a frame may be delayed within the Fabric and still be
delivered."
::= { fcmFxPortEntry 1 }
fcmFxPortEdtov OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Error_Detect_Timeout value configured for this Fx_Port.
This is used as the timeout value for detecting an error
condition."
::= { fcmFxPortEntry 2 }
fcmFxPortRttov OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receiver_Transmitter_Timeout value of this Fx_Port.
This is used by the receiver logic to detect a Loss of
Synchronization."
::= { fcmFxPortEntry 3 }
fcmFxPortHoldTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum time that this Fx_Port shall hold a frame
before discarding the frame if it is unable to deliver the
frame. The value 0 means that this Fx_Port does not support
this parameter."
::= { fcmFxPortEntry 4 }
fcmFxPortCapBbCreditMax OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of receive buffers that this port is
capable of making available for holding frames from attached
Nx_Port(s)."
::= { fcmFxPortEntry 5 }
fcmFxPortCapBbCreditMin OBJECT-TYPE
SYNTAX FcBbCredit
UNITS "buffers"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of receive buffers that this port is
capable of making available for holding frames from attached
Nx_Port(s)."
::= { fcmFxPortEntry 6 }
fcmFxPortCapDataFieldSizeMax OBJECT-TYPE
SYNTAX FcDataFieldSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum size in bytes of the Data Field in a frame that
this Fx_Port is capable of receiving from an attached
Nx_Port."
::= { fcmFxPortEntry 7 }
fcmFxPortCapDataFieldSizeMin OBJECT-TYPE
SYNTAX FcDataFieldSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum size in bytes of the Data Field in a frame that
this Fx_Port is capable of receiving from an attached
Nx_Port."
::= { fcmFxPortEntry 8 }
fcmFxPortCapClass2SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this Fx_Port is capable of
supporting Class 2 Sequential Delivery."
::= { fcmFxPortEntry 9 }
fcmFxPortCapClass3SeqDeliv OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether this Fx_Port is capable of
supporting Class 3 Sequential Delivery."
::= { fcmFxPortEntry 10 }
fcmFxPortCapHoldTimeMax OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum holding time that this Fx_Port is capable of
supporting."
::= { fcmFxPortEntry 11 }
fcmFxPortCapHoldTimeMin OBJECT-TYPE
SYNTAX Unsigned32
UNITS "microseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum holding time that this Fx_Port is capable of
supporting."
::= { fcmFxPortEntry 12 }
--********************************
-- The Fibre Channel Inter-Switch Port Table
--
fcmISPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmISPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Additional information about E_Ports, B_Ports, and any
other type of Fibre Channel port to which inter-switch links
can be connected. This table will contain one entry for
each fcmPortTable entry that represents such a port."
::= { fcmgmtObjects 8 }
fcmISPortEntry OBJECT-TYPE
SYNTAX FcmISPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Each entry contains information about a specific port
connected to an inter-switch link."
INDEX { ifIndex }
::= { fcmISPortTable 1 }
FcmISPortEntry ::=
SEQUENCE {
fcmISPortClassFCredit FcBbCredit,
fcmISPortClassFDataFieldSize FcDataFieldSize
}
fcmISPortClassFCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum number of Class F data frames that can be
transmitted by the inter-switch port without receipt of ACK
or Link_Response frames."
::= { fcmISPortEntry 1 }
fcmISPortClassFDataFieldSize OBJECT-TYPE
SYNTAX FcDataFieldSize
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size that the inter-switch port has
agreed to support for Class F frames to/from this port. The
size specifies the largest Data Field Size for an FT_1
frame."
::= { fcmISPortEntry 2 }
--********************************
-- The Fabric Login table
--
-- This table contains the information held by FC switches
-- about the Nx_Ports that are logged-in/attached to their
-- Fx_Ports
fcmFLoginTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmFLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table that contains one entry for each Nx_Port logged-
in/attached to a particular Fx_Port in the switch. Each
entry contains the services parameters established during
the most recent Fabric Login, explicit or implicit. Note
that an Fx_Port may have one or more Nx_Ports attached to
it."
::= { fcmgmtObjects 9 }
fcmFLoginEntry OBJECT-TYPE
SYNTAX FcmFLoginEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing service parameters established from a
successful Fabric Login."
INDEX { ifIndex, fcmFLoginNxPortIndex }
::= { fcmFLoginTable 1 }
FcmFLoginEntry ::=
SEQUENCE {
fcmFLoginNxPortIndex Unsigned32,
fcmFLoginPortWwn FcNameIdOrZero,
fcmFLoginNodeWwn FcNameIdOrZero,
fcmFLoginBbCreditModel FcBbCreditModel,
fcmFLoginBbCredit FcBbCredit,
fcmFLoginClassesAgreed FcClasses,
fcmFLoginClass2SeqDelivAgreed TruthValue,
fcmFLoginClass2DataFieldSize FcDataFieldSize,
fcmFLoginClass3SeqDelivAgreed TruthValue,
fcmFLoginClass3DataFieldSize FcDataFieldSize
}
fcmFLoginNxPortIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer that uniquely identifies an Nx_Port
amongst all those attached to the Fx_Port indicated by
ifIndex.
After a value of this object is assigned to a particular
Nx_Port, that value can be re-used when and only when it is
assigned to the same Nx_Port, or, after a reset of the value
of the relevant instance of ifCounterDiscontinuityTime."
REFERENCE "The Interfaces Group MIB, RFC 2863, June 2000."
::= { fcmFLoginEntry 1 }
fcmFLoginPortWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name of the attached Nx_Port, or the zero-length
string if unknown."
::= { fcmFLoginEntry 2 }
fcmFLoginNodeWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name of the attached Nx_Port, or the zero-length
string if unknown."
::= { fcmFLoginEntry 3 }
fcmFLoginBbCreditModel OBJECT-TYPE
SYNTAX FcBbCreditModel
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The buffer-to-buffer credit model in use by the Fx_Port."
::= { fcmFLoginEntry 4 }
fcmFLoginBbCredit OBJECT-TYPE
SYNTAX FcBbCredit
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of buffers available for holding frames to be
transmitted to the attached Nx_Port. These buffers are for
buffer-to-buffer flow control in the direction from Fx_Port
to Nx_Port."
::= { fcmFLoginEntry 5 }
fcmFLoginClassesAgreed OBJECT-TYPE
SYNTAX FcClasses
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Classes of Service that the Fx_Port has agreed to
support for this Nx_Port."
::= { fcmFLoginEntry 6 }
fcmFLoginClass2SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the Fx_Port has agreed to support
Class 2 sequential delivery for this Nx_Port. This is only
meaningful if Class 2 service has been agreed upon."
::= { fcmFLoginEntry 7 }
fcmFLoginClass2DataFieldSize OBJECT-TYPE
SYNTAX FcDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size that the Fx_Port has agreed to
support for Class 2 frames to/from this Nx_Port. The size
specifies the largest Data Field Size for an FT_1 frame.
This is only meaningful if Class 2 service has been agreed
upon."
::= { fcmFLoginEntry 8 }
fcmFLoginClass3SeqDelivAgreed OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of whether the Fx_Port has agreed to support
Class 3 sequential delivery for this Nx_Port. This is only
meaningful if Class 3 service has been agreed upon."
::= { fcmFLoginEntry 9 }
fcmFLoginClass3DataFieldSize OBJECT-TYPE
SYNTAX FcDataFieldSize
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Receive Data Field Size that the Fx_Port has agreed to
support for Class 3 frames to/from this Nx_Port. The size
specifies the largest Data Field Size for an FT_1 frame.
This is only meaningful if Class 3 service has been agreed
upon."
::= { fcmFLoginEntry 10 }
--********************************
-- The Link table
--
-- This table is intended to assist management applications
-- in determining the topology of the network. The table
-- contains any recent information the known to the agent
-- about Fibre Channel links, not only those that terminate at
-- a local port but also any others for which information
-- is known.
fcmLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF FcmLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing any Fibre Channel link information that
is known to local Fibre Channel managed instances. One end
of such a link is typically at a local port, but the table
can also contain information on links for which neither end
is a local port.
If one end of a link terminates locally, then that end is
termed 'end1'; the other end is termed 'end2'."
::= { fcmgmtObjects 10 }
fcmLinkEntry OBJECT-TYPE
SYNTAX FcmLinkEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing information that a particular Fibre
Channel managed instance has about a Fibre Channel link.
The two ends of the link are called 'end1' and 'end2'."
INDEX { fcmInstanceIndex, fcmLinkIndex }
::= { fcmLinkTable 1 }
FcmLinkEntry ::=
SEQUENCE {
fcmLinkIndex Unsigned32,
fcmLinkEnd1NodeWwn FcNameIdOrZero,
fcmLinkEnd1PhysPortNumber Unsigned32,
fcmLinkEnd1PortWwn FcNameIdOrZero,
fcmLinkEnd2NodeWwn FcNameIdOrZero,
fcmLinkEnd2PhysPortNumber Unsigned32,
fcmLinkEnd2PortWwn FcNameIdOrZero,
fcmLinkEnd2AgentAddress SnmpAdminString,
fcmLinkEnd2PortType FcPortType,
fcmLinkEnd2UnitType FcUnitFunctions,
fcmLinkEnd2FcAddressId FcAddressIdOrZero
}
fcmLinkIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer that uniquely identifies one link
within the set of links about which a particular managed
instance has information."
::= { fcmLinkEntry 1 }
fcmLinkEnd1NodeWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name of end1, or the zero-length string if
unknown."
::= { fcmLinkEntry 2 }
fcmLinkEnd1PhysPortNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port number of end1, or zero if unknown."
REFERENCE
"FC-GS-3, section 6.1.2.2.5"
::= { fcmLinkEntry 3 }
fcmLinkEnd1PortWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port WWN of end1, or the zero-length string if unknown.
('end1' is local if this value is equal to the value of
fcmPortWwn in one of the rows of the fcmPortTable.)"
::= { fcmLinkEntry 4 }
fcmLinkEnd2NodeWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The node name of end2, or the zero-length string if
unknown."
::= { fcmLinkEntry 5 }
fcmLinkEnd2PhysPortNumber OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The physical port number of end2, or zero if unknown."
REFERENCE
"FC-GS-3, section 6.1.2.2.5"
::= { fcmLinkEntry 6 }
fcmLinkEnd2PortWwn OBJECT-TYPE
SYNTAX FcNameIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port WWN of end2, or the zero-length string if
unknown."
::= { fcmLinkEntry 7 }
fcmLinkEnd2AgentAddress OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address of the management agent for the Fibre Channel
Interconnect Element or Platform of which end2 is a part.
The GS-4 specification provides some information about
management agents. If the address is unknown, the value of
this object is the zero-length string."
REFERENCE
"FC-GS-3, section 6.1.2.1.7"
::= { fcmLinkEntry 8 }
fcmLinkEnd2PortType OBJECT-TYPE
SYNTAX FcPortType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port type of end2."
REFERENCE
"FC-GS-3, section 6.1.2.2.2"
::= { fcmLinkEntry 9 }
fcmLinkEnd2UnitType OBJECT-TYPE
SYNTAX FcUnitFunctions
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of/function(s) performed by the Fibre Channel
Interconnect Element or Platform of which end2 is a part."
REFERENCE
"FC-GS-3, sections 6.1.2.1.2 and 6.1.2.3.2"
::= { fcmLinkEntry 10 }
fcmLinkEnd2FcAddressId OBJECT-TYPE
SYNTAX FcAddressIdOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fibre Channel Address ID of end2, or the zero-length
string if unknown."
::= { fcmLinkEntry 11 }
--********************************
-- Conformance Section
--
fcmgmtCompliances OBJECT IDENTIFIER ::= { fcmgmtConformance 1 }
fcmgmtGroups OBJECT IDENTIFIER ::= { fcmgmtConformance 2 }
fcmgmtCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"Describes the requirements for compliance to this Fibre
Channel Management MIB."
MODULE -- this module
MANDATORY-GROUPS { fcmInstanceBasicGroup,
fcmPortBasicGroup,
fcmPortErrorsGroup }
GROUP fcmPortStatsGroup
DESCRIPTION
"This group is mandatory for all systems that
are able to support the Counter64 date type."
GROUP fcmPortClass23StatsGroup
DESCRIPTION
"This group is mandatory only for systems that
keep class-specific traffic statistics on Class 2
and Class 3 traffic and are able to support the
Counter64 date type."
GROUP fcmPortClassFStatsGroup
DESCRIPTION
"This group is mandatory only for FC switches that
keep statistics on Class F traffic."
GROUP fcmPortLcStatsGroup
DESCRIPTION
"This group is mandatory only for agents that can not
support the Counter64 data type and/or need to provide
information accessible by SNMPv1 applications."
GROUP fcmSwitchBasicGroup
DESCRIPTION
"This group is mandatory only for Fibre Channel
managed instances that manage Fibre Channel
switches."
GROUP fcmSwitchPortGroup
DESCRIPTION
"This group is mandatory only for Fibre Channel
managed instances that manage Fibre Channel
switches."
GROUP fcmSwitchLoginGroup
DESCRIPTION
"This group is mandatory only for Fibre Channel
managed instances that manage Fibre Channel
switches."
GROUP fcmLinkBasicGroup
DESCRIPTION
"This group is optional."
OBJECT fcmInstancePhysicalIndex
SYNTAX Integer32 (0)
DESCRIPTION
"Implementation of a non-zero value is not required."
OBJECT fcmInstanceSoftwareIndex
SYNTAX Integer32 (0)
DESCRIPTION
"Implementation of a non-zero value is not required."
OBJECT fcmInstanceTextName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcmInstanceDescr
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcmPortAdminType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcmPortAdminSpeed
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcmSwitchDomainId
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT fcmISPortClassFCredit
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
::= { fcmgmtCompliances 1 }
--********************************
-- Object Groups
--
fcmInstanceBasicGroup OBJECT-GROUP
OBJECTS { fcmInstanceWwn, fcmInstanceFunctions,
fcmInstancePhysicalIndex, fcmInstanceSoftwareIndex,
fcmInstanceStatus, fcmInstanceTextName,
fcmInstanceDescr, fcmInstanceFabricId }
STATUS current
DESCRIPTION
"Basic information about Fibre Channel managed instances."
::= { fcmgmtGroups 1 }
fcmSwitchBasicGroup OBJECT-GROUP
OBJECTS { fcmSwitchDomainId, fcmSwitchPrincipal, fcmSwitchWWN }
STATUS current
DESCRIPTION
"Basic information about Fibre Channel switches."
::= { fcmgmtGroups 2 }
fcmPortBasicGroup OBJECT-GROUP
OBJECTS { fcmPortInstanceIndex, fcmPortWwn, fcmPortNodeWwn,
fcmPortAdminType, fcmPortOperType, fcmPortFcCapClass,
fcmPortFcOperClass, fcmPortTransmitterType,
fcmPortConnectorType, fcmPortSerialNumber,
fcmPortPhysicalNumber, fcmPortAdminSpeed,
fcmPortCapProtocols, fcmPortOperProtocols }
STATUS current
DESCRIPTION
"Basic information about Fibre Channel ports."
::= { fcmgmtGroups 3 }
fcmPortStatsGroup OBJECT-GROUP
OBJECTS { fcmPortBBCreditZeros, fcmPortFullInputBuffers }
STATUS current
DESCRIPTION
"Traffic statistics, which are not specific to any one class
of service, for Fibre Channel ports."
::= { fcmgmtGroups 4 }
fcmPortClass23StatsGroup OBJECT-GROUP
OBJECTS { fcmPortClass2RxFrames, fcmPortClass2RxOctets,
fcmPortClass2TxFrames, fcmPortClass2TxOctets,
fcmPortClass2Discards, fcmPortClass2RxFbsyFrames,
fcmPortClass2RxPbsyFrames,
fcmPortClass2RxFrjtFrames,
fcmPortClass2RxPrjtFrames,
fcmPortClass2TxFbsyFrames,
fcmPortClass2TxPbsyFrames,
fcmPortClass2TxFrjtFrames,
fcmPortClass2TxPrjtFrames, fcmPortClass3RxFrames,
fcmPortClass3RxOctets, fcmPortClass3TxFrames,
fcmPortClass3TxOctets, fcmPortClass3Discards }
STATUS current
DESCRIPTION
"Traffic statistics for Class 2 and Class 3 traffic on Fibre
Channel ports."
::= { fcmgmtGroups 5 }
fcmPortClassFStatsGroup OBJECT-GROUP
OBJECTS { fcmPortClassFRxFrames,
fcmPortClassFRxOctets,
fcmPortClassFTxFrames,
fcmPortClassFTxOctets,
fcmPortClassFDiscards }
STATUS current
DESCRIPTION
"Traffic statistics for Class F traffic on Fibre Channel
ports."
::= { fcmgmtGroups 6 }
fcmPortLcStatsGroup OBJECT-GROUP
OBJECTS { fcmPortLcBBCreditZeros, fcmPortLcFullInputBuffers,
fcmPortLcClass2RxFrames, fcmPortLcClass2RxOctets,
fcmPortLcClass2TxFrames, fcmPortLcClass2TxOctets,
fcmPortLcClass2Discards, fcmPortLcClass3Discards,
fcmPortLcClass3RxFrames, fcmPortLcClass3RxOctets,
fcmPortLcClass3TxFrames, fcmPortLcClass3TxOctets,
fcmPortLcClass2RxFbsyFrames,
fcmPortLcClass2RxPbsyFrames,
fcmPortLcClass2RxFrjtFrames,
fcmPortLcClass2RxPrjtFrames,
fcmPortLcClass2TxFbsyFrames,
fcmPortLcClass2TxPbsyFrames,
fcmPortLcClass2TxFrjtFrames,
fcmPortLcClass2TxPrjtFrames }
STATUS current
DESCRIPTION
"Low-capacity (32-bit) statistics for Fibre Channel ports."
::= { fcmgmtGroups 7 }
fcmPortErrorsGroup OBJECT-GROUP
OBJECTS { fcmPortRxLinkResets, fcmPortTxLinkResets,
fcmPortLinkResets, fcmPortRxOfflineSequences,
fcmPortTxOfflineSequences, fcmPortLinkFailures,
fcmPortLossofSynchs, fcmPortLossofSignals,
fcmPortPrimSeqProtocolErrors, fcmPortInvalidTxWords,
fcmPortInvalidCRCs, fcmPortInvalidOrderedSets,
fcmPortFrameTooLongs, fcmPortTruncatedFrames,
fcmPortAddressErrors, fcmPortDelimiterErrors,
fcmPortEncodingDisparityErrors,
fcmPortOtherErrors }
STATUS current
DESCRIPTION
"Error statistics for Fibre Channel ports."
::= { fcmgmtGroups 8 }
fcmSwitchPortGroup OBJECT-GROUP
OBJECTS { fcmFxPortRatov, fcmFxPortEdtov, fcmFxPortRttov,
fcmFxPortHoldTime, fcmFxPortCapBbCreditMax,
fcmFxPortCapBbCreditMin,
fcmFxPortCapDataFieldSizeMax,
fcmFxPortCapDataFieldSizeMin,
fcmFxPortCapClass2SeqDeliv,
fcmFxPortCapClass3SeqDeliv,
fcmFxPortCapHoldTimeMax,
fcmFxPortCapHoldTimeMin,
fcmISPortClassFCredit,
fcmISPortClassFDataFieldSize }
STATUS current
DESCRIPTION
"Information about ports on a Fibre Channel switch."
::= { fcmgmtGroups 9 }
fcmSwitchLoginGroup OBJECT-GROUP
OBJECTS { fcmFLoginPortWwn, fcmFLoginNodeWwn,
fcmFLoginBbCreditModel, fcmFLoginBbCredit,
fcmFLoginClassesAgreed,
fcmFLoginClass2SeqDelivAgreed,
fcmFLoginClass2DataFieldSize,
fcmFLoginClass3SeqDelivAgreed,
fcmFLoginClass3DataFieldSize }
STATUS current
DESCRIPTION
"Information known to a Fibre Channel switch about
attached/logged-in Nx_Ports."
::= { fcmgmtGroups 10 }
fcmLinkBasicGroup OBJECT-GROUP
OBJECTS { fcmLinkEnd1NodeWwn , fcmLinkEnd1PhysPortNumber,
fcmLinkEnd1PortWwn, fcmLinkEnd2NodeWwn ,
fcmLinkEnd2PhysPortNumber, fcmLinkEnd2PortWwn,
fcmLinkEnd2AgentAddress, fcmLinkEnd2PortType,
fcmLinkEnd2UnitType, fcmLinkEnd2FcAddressId }
STATUS current
DESCRIPTION
"Information about Fibre Channel links."
::= { fcmgmtGroups 11 }
END
Reference in New Issue View Git Blame Copy Permalink