MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/DOCS-SUBMGT3-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1407 lines
54 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- DOCS-SUBMGT3-MIB.my:
--
-- May 2008 Baoli Chen
--
-- Initial Version: May 2008: Annex Q.2 from CM-SP-OSSIv3.0-I07-080522
--
-- Copyright (c) 2008 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
DOCS-SUBMGT3-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Counter64
FROM SNMPv2-SMI -- RFC 2578
RowStatus,
TruthValue,
TimeStamp,
MacAddress
FROM SNMPv2-TC -- RFC 2579
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF -- RFC 2580
InetAddressType,
InetAddress,
InetAddressPrefixLength,
InetPortNumber
FROM INET-ADDRESS-MIB -- RFC 4001
docsIf3CmtsCmRegStatusEntry,
docsIf3CmtsCmRegStatusId
FROM DOCS-IF3-MIB
SnmpTagList
FROM SNMP-TARGET-MIB -- RFC 3411
DocsL2vpnIfList
FROM DOCS-L2VPN-MIB
clabProjDocsis
FROM CLAB-DEF-MIB;
docsSubmgt3Mib MODULE-IDENTITY
LAST-UPDATED "200705180000Z" -- May 18, 2007
ORGANIZATION "Cable Television Laboratories, Inc."
CONTACT-INFO
"
Postal: Cable Television Laboratories, Inc.
858 Coal Creek Circle
Louisville, Colorado 80027-9750
U.S.A.
Phone: +1 303-661-9100
Fax: +1 303-661-9199
E-mail: mibs@cablelabs.com"
DESCRIPTION
"This MIB module contains the management objects for the
CMTS control of the IP4 and IPv6 traffic with origin and
destination to CMs and/or CPEs behind the CM."
REVISION "200705180000Z" -- May 18, 2007
DESCRIPTION
"Revised Version includes ECNs
OSSIv3.0-N-07.0445-3
OSSIv3.0-N-07.0444-3
OSSIv3.0-N-07.0441-4
and published as I03"
REVISION "200612071700Z" -- Dec 7, 2006
DESCRIPTION
"Initial version, published as part of the CableLabs
OSSIv3.0 specification CM-SP-OSSIv3.0-I01-061207
Copyright 1999-2006 Cable Television Laboratories, Inc.
All rights reserved."
::= { clabProjDocsis 10 }
-- Textual Conventions
-- Object Definitions
docsSubmgt3MibObjects OBJECT IDENTIFIER ::= { docsSubmgt3Mib 1 }
docsSubmgt3Base OBJECT IDENTIFIER ::= { docsSubmgt3MibObjects 1 }
docsSubmgt3BaseCpeMaxIpv4Def OBJECT-TYPE
SYNTAX Unsigned32 (0..1023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the maximum number of IPv4
Addresses allowed for the CM's CPEs if not signaled in the
registration process."
DEFVAL { 16 }
::= { docsSubmgt3Base 1 }
docsSubmgt3BaseCpeMaxIpv6PrefixDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the maximum number of IPv6
prefixes allowed for the CM's CPEs if not signaled in
the registration process."
DEFVAL { 16 }
::= { docsSubmgt3Base 2 }
docsSubmgt3BaseCpeActiveDef OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for enabling
Subscriber Management filters and controls
in the CM if the parameter is not signaled in the DOCSIS
Registration process."
DEFVAL { false }
::= { docsSubmgt3Base 3 }
docsSubmgt3BaseCpeLearnableDef OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for enabling
the CPE learning process for the CM if the parameter
is not signaled in the DOCSIS Registration process."
DEFVAL { true }
::= { docsSubmgt3Base 4 }
docsSubmgt3BaseSubFilterDownDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
subscriber (CPE) downstream filter group for the
CM if the parameter is not signaled in the DOCSIS Registration
process."
DEFVAL { 0 }
::= { docsSubmgt3Base 5 }
docsSubmgt3BaseSubFilterUpDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
subscriber (CPE) upstream filter group for the CM
if the parameter is not signaled in the DOCSIS Registration
process."
DEFVAL { 0 }
::= { docsSubmgt3Base 6 }
docsSubmgt3BaseCmFilterDownDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
CM stack downstream filter group applying to the CM
if the parameter is not signaled in the DOCSIS Registration
process."
DEFVAL { 0 }
::= { docsSubmgt3Base 7 }
docsSubmgt3BaseCmFilterUpDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
CM stack upstream filter group applying to the CM if
the parameter is not signaled in the DOCSIS Registration
process."
DEFVAL { 0 }
::= { docsSubmgt3Base 8 }
docsSubmgt3BasePsFilterDownDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
PS or eRouter downstream filter group for the CM if
the parameter is not signaled in the DOCSIS Registration
process."
DEFVAL { 0 }
::= { docsSubmgt3Base 9 }
docsSubmgt3BasePsFilterUpDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
PS or eRouter upstream filter group for the CM if the
parameter is not signaled in the DOCSIS Registration
process."
DEFVAL { 0 }
::= { docsSubmgt3Base 10 }
docsSubmgt3BaseMtaFilterDownDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
MTA downstream filter group for the CM if the parameter
is not signaled in the DOCSIS Registration process."
DEFVAL { 0 }
::= { docsSubmgt3Base 11 }
docsSubmgt3BaseMtaFilterUpDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
MTA upstream filter group for the CM if the parameter
is not signaled in the DOCSIS Registration process."
DEFVAL { 0 }
::= { docsSubmgt3Base 12 }
docsSubmgt3BaseStbFilterDownDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
STB downstream filter group for the CM if the parameter
is not signaled in the DOCSIS Registration process."
DEFVAL { 0 }
::= { docsSubmgt3Base 13 }
docsSubmgt3BaseStbFilterUpDef OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the default value for the
STB upstream filter group for the CM if the parameter
is not signaled in the DOCSIS Registration process."
DEFVAL { 0 }
::= { docsSubmgt3Base 14 }
docsSubmgt3CpeCtrlTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsSubmgt3CpeCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object maintains per-CM traffic policies enforced
by the CMTS. The CMTS acquires the CM traffic policies
through the CM registration process, or in the
absence of some or all of those parameters, from the
Base object. The CM information and controls are meaningful
and used by the CMTS, but only after the CM is
operational."
::= { docsSubmgt3MibObjects 2}
docsSubmgt3CpeCtrlEntry OBJECT-TYPE
SYNTAX DocsSubmgt3CpeCtrlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsSubmgt3CpeCtrlTable.
The CMTS does not persist the instances of the CpeCtrl
object across reinitializations."
AUGMENTS { docsIf3CmtsCmRegStatusEntry }
::= { docsSubmgt3CpeCtrlTable 1 }
DocsSubmgt3CpeCtrlEntry ::= SEQUENCE {
docsSubmgt3CpeCtrlMaxCpeIpv4
Unsigned32,
docsSubmgt3CpeCtrlMaxCpeIpv6Prefix
Unsigned32,
docsSubmgt3CpeCtrlActive
TruthValue,
docsSubmgt3CpeCtrlLearnable
TruthValue,
docsSubmgt3CpeCtrlReset
TruthValue,
docsSubmgt3CpeCtrlLastReset
TimeStamp
}
docsSubmgt3CpeCtrlMaxCpeIpv4 OBJECT-TYPE
SYNTAX Unsigned32 (0..1023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the number of simultaneous
IP v4 addresses permitted for CPE connected to the CM.
When the MaxCpeIpv4 attribute is set to zero (0), all Ipv4 CPE
traffic from the CM is dropped. The CMTS configures this
attribute with whichever of the 'Subscriber Management CPE IPv4
List' or 'Subscriber Management Control-Max_CpeIPv4' signaled
encodings is greater, or in the absence of all of those
provisioning parameters, with the CpeMaxIp v4Def
from the Base object. This limit applies to learned
and DOCSIS-provisioned entries but not to entries added
through some administrative process at the CMTS.
Note that this attribute is only meaningful when the
Active attribute of the CM is set to 'true'."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management
TLVs section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsSubmgt3CpeCtrlEntry 1 }
docsSubmgt3CpeCtrlMaxCpeIpv6Prefix OBJECT-TYPE
SYNTAX Unsigned32 (0..1023)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the number of simultaneous
IPv6 prefixes permitted for CPE connected to the
CM.
When the MaxCpeIpv6Prefix is set to zero (0), all IPv6 CPE
traffic from the CM is dropped. The CMTS configures this
attribute with whichever of the 'Subscriber Management CPE IPv6 List'
or'Subscriber Management Control Max Cpe IPv6 Prefix'
signaled encodings is greater, or in the absence of all of those
provisioning parameters, with the CpeMaxIpv6PrefixDef
from the Base object. This limit applies to learned
and DOCSIS-provisioned entries but not to entries added
through some administrative process at the CMTS.
Note that this attribute is only meaningful when the
Active attribute of the CM is set to 'true'."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management
TLVs section in the Common Radio Frequency Interface Encodings
Annex."
::= { docsSubmgt3CpeCtrlEntry 2 }
docsSubmgt3CpeCtrlActive OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls the application of subscriber
management to this CM. If this is set to 'true',
CMTS-based CPE control is active, and all the actions
required by the various filter policies and controls
apply at the CMTS. If this is set to false, no subscriber
management filtering is done at the CMTS (but other
filters may apply). If not set through DOCSIS provisioning,
this object defaults to the value of the Active
attribute of the Base object."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management
Control section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsSubmgt3CpeCtrlEntry 3 }
docsSubmgt3CpeCtrlLearnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute controls whether the CMTS may learn
(and pass traffic for) CPE IP addresses associated
with a CM. If this is set to 'true', the CMTS may learn up
to the CM MaxCpeIp value less any DOCSIS-provisioned
entries related to this CM. The nature of the learning
mechanism is not specified here. If not set through
DOCSIS provisioning, this object defaults to the
value of the CpeLearnableDef attribute from the Base
object. Note that this attribute is only meaningful
if docsSubMgtCpeControlActive is 'true' to enforce
a limit in the number of CPEs learned. CPE learning
is always performed for the CMTS for security reasons."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I04-070518, Subscriber Management
Control section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsSubmgt3CpeCtrlEntry 4 }
docsSubmgt3CpeCtrlReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If set to 'true', this attribute commands the CMTS
to delete the instances denoted as 'learned' addresses
in the CpeIp object. This attribute always returns
false on read."
::= { docsSubmgt3CpeCtrlEntry 5 }
docsSubmgt3CpeCtrlLastReset OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the system Up Time of the
last set to 'true' of the Reset attribute of this instance.
Zero if never reset."
::= { docsSubmgt3CpeCtrlEntry 6 }
docsSubmgt3CpeIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsSubmgt3CpeIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines the list of IP Addresses behind
the CM known by the CMTS.
If the Active attribute of the CpeCtrl object associated
with a CM is set to 'true' and the CMTS receives an
IP packet from a CM that contains a source IP address that
does not match one of the CPE IP addresses associated
with this CM, one of two things occurs. If the number
of CPE IPs is less than the MaxCpeIp of the CpeCtrl object
for that CM, the source IP address is added to this
object and the packet is forwarded; otherwise, the
packet is dropped."
::= { docsSubmgt3MibObjects 3}
docsSubmgt3CpeIpEntry OBJECT-TYPE
SYNTAX DocsSubmgt3CpeIpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsSubmgt3CpeIpTable."
INDEX {
docsIf3CmtsCmRegStatusId,
docsSubmgt3CpeIpId
}
::= { docsSubmgt3CpeIpTable 1 }
DocsSubmgt3CpeIpEntry ::= SEQUENCE {
docsSubmgt3CpeIpId
Unsigned32,
docsSubmgt3CpeIpAddrType
InetAddressType,
docsSubmgt3CpeIpAddr
InetAddress,
docsSubmgt3CpeIpAddrPrefixLen
InetAddressPrefixLength,
docsSubmgt3CpeIpLearned
TruthValue,
docsSubmgt3CpeIpType
INTEGER
}
docsSubmgt3CpeIpId OBJECT-TYPE
SYNTAX Unsigned32 (1..1023)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This attribute represents a unique identifier for
a CPE IP of the CM. An instance of this attribute exists
for each CPE provisioned in the 'Subscriber Management
CPE IPv4 Table' or 'Subscriber Management CPE
IPv6 Table' encodings. An entry is created either through
the included CPE IP addresses in the provisioning
object, or CPEs learned from traffic sourced from the
CM."
::= { docsSubmgt3CpeIpEntry 1 }
docsSubmgt3CpeIpAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Internet address of the Addr attribute."
::= { docsSubmgt3CpeIpEntry 2 }
docsSubmgt3CpeIpAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the IP address either set
from provisioning or learned via address gleaning
or other forwarding means."
::= { docsSubmgt3CpeIpEntry 3 }
docsSubmgt3CpeIpAddrPrefixLen OBJECT-TYPE
SYNTAX InetAddressPrefixLength
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the prefix length associated with
the IP subnet prefix either set from provisioning or learned
via address gleaning or other forwarding means. For IPv4 CPE
addresses this attribute generally reports the value 32
(32 bits) to indicate a unicast IPv4 address. For IPv6, this
attribute represents either an IPv6 unicast address
(128 bits, equal to /128 prefix length) or a subnet prefix
length (for example 56 bits, equal to /56 prefix length)."
::= { docsSubmgt3CpeIpEntry 4 }
docsSubmgt3CpeIpLearned OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute is set to 'true' when the IP address
was learned from IP packets sent upstream rather than
via the CM provisioning process."
::= { docsSubmgt3CpeIpEntry 5 }
docsSubmgt3CpeIpType OBJECT-TYPE
SYNTAX INTEGER {
cpe(1),
ps(2),
mta(3),
stb(4),
tea(5),
erouter(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute represents the type of CPE based on
the following classification below:
'cpe' Regular CPE clients.
'ps' CableHome Portal Server (PS)
'mta' PacketCable Multimedia Terminal Adapter (MTA)
'stb' Digital Set-top Box (STB).
'tea' T1 Emulation adapter (TEA)
'erouter' Embedded Router (eRouter)"
::= { docsSubmgt3CpeIpEntry 6 }
docsSubmgt3GrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsSubmgt3GrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object defines the set of downstream and upstream
filter groups that the CMTS applies to traffic associated
with that CM."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I01-060804, Subscriber
Management TLVs section in the Common Radio Frequency
Interface Encodings Annex."
::= { docsSubmgt3MibObjects 4}
docsSubmgt3GrpEntry OBJECT-TYPE
SYNTAX DocsSubmgt3GrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsSubmgt3GrpTable.
The CMTS does not persist the instances of the Grp
object across reinitializations."
AUGMENTS { docsIf3CmtsCmRegStatusEntry }
::= { docsSubmgt3GrpTable 1 }
DocsSubmgt3GrpEntry ::= SEQUENCE {
docsSubMgt3GrpUdcGroupIds
SnmpTagList,
docsSubMgt3GrpUdcSentInRegRsp
TruthValue,
docsSubmgt3GrpSubFilterDs
Unsigned32,
docsSubmgt3GrpSubFilterUs
Unsigned32,
docsSubmgt3GrpCmFilterDs
Unsigned32,
docsSubmgt3GrpCmFilterUs
Unsigned32,
docsSubmgt3GrpPsFilterDs
Unsigned32,
docsSubmgt3GrpPsFilterUs
Unsigned32,
docsSubmgt3GrpMtaFilterDs
Unsigned32,
docsSubmgt3GrpMtaFilterUs
Unsigned32,
docsSubmgt3GrpStbFilterDs
Unsigned32,
docsSubmgt3GrpStbFilterUs
Unsigned32
}
docsSubMgt3GrpUdcGroupIds OBJECT-TYPE
SYNTAX SnmpTagList
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group(s) associated
with the CM signaled 'Upstream Drop Classifier Group ID'
encodings during the registration process. UDC Group IDs are
integer values and this attribute reports them as decimal
numbers that are space-separated. The zero-length string indicates
that the CM didn't signal UDC Group IDs.
This attribute provides two functions:
- Communicate the CM the configured UDC Group ID(s), irrespective
of the CM being provisioned to filter upstream traffic based
on IP Filters or UDCs.
- Optionally, and with regards to the CMTS, if the value of the
attribute UdcSentInReqRsp is 'true', indicates that the filtering
rules associated with the Subscriber Management Group ID(s) will
be sent during registration to the CM. It is vendor specific
whether the CMTS updates individual CM UDCs after registration
when rules are changed in the Grp object."
DEFVAL { ''H }
::= { docsSubmgt3GrpEntry 1 }
docsSubMgt3GrpUdcSentInRegRsp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the CMTS upstream filtering
status for this CM. The value 'true' indicates that the
CMTS has sent UDCs to the CM during registration process.
In order for a CMTS to send UDCs to a CM, the CMTS MAC Domain
needed to be enabled via the MAC Domain attribute
SendUdcRulesEnabled and the CM had indicated the UDC capability
support during the registration process. The value 'false'
indicates that the CMTS was not enabled to sent UDCs to the
CMs in the MAC Domain, or the CM does not advertised UDC
support in its capabilities encodings, or both. Since the
CMTS capability to sent UDCs to CMs during the registration
process is optional, the CMTS is not required to implement
the value 'true'."
DEFVAL { false }
::= { docsSubmgt3GrpEntry 2 }
docsSubmgt3GrpSubFilterDs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic destined for subscriber's CPE attached to the
referenced CM (attached to CM CPE interfaces). This
value corresponds to the 'Subscriber Downstream
Group' value of the 'Subscriber Management Filter Groups'
encoding signaled during the CM registration
or in its absence, to the SubFilterDownDef attribute
of the Base object. The value zero or a filter group
ID not configured in the CMTS means no filtering is applied
to traffic destined to hosts attached to this CM."
::= { docsSubmgt3GrpEntry 3 }
docsSubmgt3GrpSubFilterUs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic originating from subscriber's CPE attached
to the referenced CM (attached to CM CPE interfaces).
This value corresponds to the 'Subscriber Upstream
Group' value of the 'Subscriber Management Filter
Groups' encoding signaled during the CM registration
or in its absence, to the SubFilterUpDef attribute
of the Base object. The value zero or a filter group
ID not configured in the CMTS means no filtering
is applied to traffic originating from hosts attached
to this CM."
::= { docsSubmgt3GrpEntry 4 }
docsSubmgt3GrpCmFilterDs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic destined for the CM itself. This value corresponds
to the 'CM Downstream Group' value of the
'Subscriber Management Filter Groups' encoding signaled
during the CM registration or in its absence,
to the CmFilterDownDef attribute of the Base object.
The value zero or a filter group ID not configured in
the CMTS means no filtering is applied to traffic destined
to the CM."
::= { docsSubmgt3GrpEntry 5 }
docsSubmgt3GrpCmFilterUs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic originating from the CM itself. This value
corresponds to the 'Subscriber Upstream Group'
value of the 'Subscriber Management Filter Groups'
encoding signaled during the CM registration or in its
absence, to the SubFilterUpDef attribute of the Base
object. The value zero or a filter group ID not configured
in the CMTS means no filtering is applied to traffic
originating from this CM."
::= { docsSubmgt3GrpEntry 6 }
docsSubmgt3GrpPsFilterDs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic destined to the Embedded CableHome Portal
Services Element or the Embedded Router on the referenced
CM. This value corresponds to the 'PS Downstream
Group' value of the 'Subscriber Management Filter
Groups' encoding signaled during the CM registration
or in its absence, to the SubFilterDownDef attribute
of the Base object. The value zero or a filter
group ID not configured in the CMTS means no filtering
is applied to traffic destined to the Embedded CableHome
Portal Services Element or Embedded Router on
this CM."
::= { docsSubmgt3GrpEntry 7 }
docsSubmgt3GrpPsFilterUs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic originating from the Embedded CableHome
Portal Services Element or Embedded Router on the
referenced CM. This value corresponds to the 'PS Upstream
Group' value of the 'Subscriber Management Filter
Groups' encoding signaled during the CM registration
or in its absence, to the SubFilterUpDef attribute
of the Base object. The value zero or a filter group
ID not configured in the CMTS means no filtering is
applied to traffic originating from the Embedded CableHome
Portal Services Element or Embedded Router
on this CM."
::= { docsSubmgt3GrpEntry 8 }
docsSubmgt3GrpMtaFilterDs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic destined to the Embedded Multimedia Terminal
Adapter on the referenced CM. This value corresponds
to the 'MTA Downstream Group' value of the 'Subscriber
Management Filter Groups' encoding signaled
during the CM registration or in its absence, to
the SubFilterDownDef attribute of the Base object.
The value zero or a filter group ID not configured in the
CMTS means no filtering is applied to traffic destined
to the Embedded Multimedia Terminal Adapter on
this CM."
::= { docsSubmgt3GrpEntry 9 }
docsSubmgt3GrpMtaFilterUs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic originating from the Embedded Multimedia
Terminal Adapter on the referenced CM. This value
corresponds to the 'MTA Upstream Group' value of the
'Subscriber Management Filter Groups' encoding signaled
during the CM registration or in its absence,
to the SubFilterUpDef attribute of the Base object.
The value zero or a filter group ID not configured in
the CMTS means no filtering is applied to traffic originating
from the Embedded Multimedia Terminal Adapter
on this CM."
::= { docsSubmgt3GrpEntry 10 }
docsSubmgt3GrpStbFilterDs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic destined for the Embedded Set-Top Box on
the referenced CM. This value corresponds to the 'STB
Downstream Group' value of the 'Subscriber Management
Filter Groups' encoding signaled during the CM
registration or in its absence, to the SubFilterDownDef
attribute of the Base object. The value zero or
a filter group ID not configured in the CMTS means no filtering
is applied to traffic destined to the Embedded
Set-Top Box on this CM."
::= { docsSubmgt3GrpEntry 11 }
docsSubmgt3GrpStbFilterUs OBJECT-TYPE
SYNTAX Unsigned32 (0..1024)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This attribute represents the filter group applied
to traffic originating from the Embedded Set-Top
Box on the referenced CM. This value corresponds to the
'STB Upstream Group' value of the 'Subscriber Management
Filter Groups' encoding signaled during the
CM registration or in its absence, to the SubFilterUpDef
attribute of the Base object. The value zero or
a filter group ID not configured in the CMTS means no filtering
is applied to traffic originating from the
Embedded Set-Top Box on this CM."
::= { docsSubmgt3GrpEntry 12 }
docsSubmgt3FilterGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF DocsSubmgt3FilterGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object describes a set of filter or classifier
criteria. Classifiers are assigned by group to the
individual CMs. That assignment is made via the 'Subscriber
Management TLVs' encodings sent upstream from
the CM to the CMTS during registration or in their
absence, default values configured in the CMTS.
A Filter Group ID (GrpId) is a set of rules that correspond
to the expansion of a UDC Group ID into UDC individual
classification rules. The Filter Group Ids are generated
whenever the CMTS is configured to send UDCs during the CM
registration process. Implementation of L2 classification
criteria is optional for the CMTS; LLC/MAC upstream and
downstream filter criteria can be ignored during the packet
matching process."
::= { docsSubmgt3MibObjects 5}
docsSubmgt3FilterGrpEntry OBJECT-TYPE
SYNTAX DocsSubmgt3FilterGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The conceptual row of docsSubmgt3FilterGrpTable.
The CMTS persists all instances of the FilterGrp object
across reinitializations."
INDEX {
docsSubmgt3FilterGrpGrpId,
docsSubmgt3FilterGrpRuleId
}
::= { docsSubmgt3FilterGrpTable 1 }
DocsSubmgt3FilterGrpEntry ::= SEQUENCE {
docsSubmgt3FilterGrpGrpId
Unsigned32,
docsSubmgt3FilterGrpRuleId
Unsigned32,
docsSubmgt3FilterGrpAction
INTEGER,
docsSubmgt3FilterGrpPriority
Unsigned32,
docsSubmgt3FilterGrpIpTosLow
OCTET STRING,
docsSubmgt3FilterGrpIpTosHigh
OCTET STRING,
docsSubmgt3FilterGrpIpTosMask
OCTET STRING,
docsSubmgt3FilterGrpIpProtocol
Unsigned32,
docsSubmgt3FilterGrpInetAddrType
InetAddressType,
docsSubmgt3FilterGrpInetSrcAddr
InetAddress,
docsSubmgt3FilterGrpInetSrcMask
InetAddress,
docsSubmgt3FilterGrpInetDestAddr
InetAddress,
docsSubmgt3FilterGrpInetDestMask
InetAddress,
docsSubmgt3FilterGrpSrcPortStart
InetPortNumber,
docsSubmgt3FilterGrpSrcPortEnd
InetPortNumber,
docsSubmgt3FilterGrpDestPortStart
InetPortNumber,
docsSubmgt3FilterGrpDestPortEnd
InetPortNumber,
docsSubmgt3FilterGrpDestMacAddr
MacAddress,
docsSubmgt3FilterGrpDestMacMask
MacAddress,
docsSubmgt3FilterGrpSrcMacAddr
MacAddress,
docsSubmgt3FilterGrpEnetProtocolType
INTEGER,
docsSubmgt3FilterGrpEnetProtocol
Unsigned32,
docsSubmgt3FilterGrpUserPriLow
Unsigned32,
docsSubmgt3FilterGrpUserPriHigh
Unsigned32,
docsSubmgt3FilterGrpVlanId
Unsigned32,
docsSubmgt3FilterGrpClassPkts
Counter64,
docsSubmgt3FilterGrpFlowLabel
Unsigned32,
docsSubmgt3FilterGrpCmInterfaceMask
DocsL2vpnIfList,
docsSubmgt3FilterGrpRowStatus
RowStatus
}
docsSubmgt3FilterGrpGrpId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key is an identifier for a set of classifiers known
as a filter group. Each CM may be associated with
several filter groups for its upstream and downstream
traffic, one group per target end point on the CM as
defined in the Grp object. Typically, many CMs share
a common set of filter groups."
::= { docsSubmgt3FilterGrpEntry 1 }
docsSubmgt3FilterGrpRuleId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This key represents an ordered classifier identifier
within the group. Filters are applied in order if
the Priority attribute is not supported."
::= { docsSubmgt3FilterGrpEntry 2 }
docsSubmgt3FilterGrpAction OBJECT-TYPE
SYNTAX INTEGER {
permit(1),
deny(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the action to take upon
this filter matching. 'permit' means to stop the classification
matching and accept the packet for further
processing. 'deny' means to drop the packet."
DEFVAL { permit }
::= { docsSubmgt3FilterGrpEntry 3 }
docsSubmgt3FilterGrpPriority OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute defines the order in which classifiers
are compared against packets. The higher the value,
the higher the priority."
DEFVAL { 0 }
::= { docsSubmgt3FilterGrpEntry 4 }
docsSubmgt3FilterGrpIpTosLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the low value of a range
of ToS (Type of Service) octet values. This object is
defined as an 8-bit octet as per the DOCSIS Specification
for packet classification.
The IP ToS octet, as originally defined in RFC 791, has
been superseded by the 6-bit Differentiated Services
Field (DSField, RFC 3260) and the 2-bit Explicit
Congestion Notification Field (ECN field, RFC 3168)."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I01-060804.
RFC 791.
RFC 3260.
RFC 3168."
DEFVAL { '00'H }
::= { docsSubmgt3FilterGrpEntry 5 }
docsSubmgt3FilterGrpIpTosHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the high value of a range
of ToS octet values. This object is defined as an 8-bit
octet as per the DOCSIS Specification for packet classification.
The IP ToS octet, as originally defined in RFC 791, has
been superseded by the 6-bit Differentiated Services
Field (DSField, RFC 3260) and the 2-bit Explicit
Congestion Notification Field (ECN field, RFC 3168)."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I01-060804.
RFC 791.
RFC 3260.
RFC 3168."
DEFVAL { '00'H }
::= { docsSubmgt3FilterGrpEntry 6 }
docsSubmgt3FilterGrpIpTosMask OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the mask value that is bitwise
ANDed with ToS octet in an IP packet, and the resulting value
is used for range checking of IpTosLow and IpTosHigh."
DEFVAL { '00'H }
::= { docsSubmgt3FilterGrpEntry 7 }
docsSubmgt3FilterGrpIpProtocol OBJECT-TYPE
SYNTAX Unsigned32 (0..257)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the value of the IP Protocol
field required for IP packets to match this rule.
The value 256 matches traffic with any IP Protocol value.
The value 257 by convention matches both TCP and
UDP."
DEFVAL { 256 }
::= { docsSubmgt3FilterGrpEntry 8 }
docsSubmgt3FilterGrpInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the Internet address for InetSrcAddr,
InetSrcMask, InetDestAddr, and InetDestMask."
DEFVAL { unknown }
::= { docsSubmgt3FilterGrpEntry 9 }
docsSubmgt3FilterGrpInetSrcAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the value of the IP Source Address
required for packets to match this rule. An IP packet
matches the rule when the packet's IP Source Address
bitwise ANDed with the InetSrcMask value equals
the InetSrcAddr value. The address type of this object
is specified by the InetAddressType attribute."
DEFVAL { ''H }
::= { docsSubmgt3FilterGrpEntry 10 }
docsSubmgt3FilterGrpInetSrcMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents which bits of a packet's
IP Source Address are compared to match this rule. An
IP packet matches the rule when the packet's IP Source
Address bitwise ANDed with the InetSrcMask value equals
the InetSrcAddr value. The address type of this
object is specified by InetAddrType."
DEFVAL { ''H }
::= { docsSubmgt3FilterGrpEntry 11 }
docsSubmgt3FilterGrpInetDestAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute specifies the value of the IP Destination
Address required for packets to match this rule.
An IP packet matches the rule when the packet's IP Destination
Address bitwise ANDed with the InetSrcMask
value equals the InetDestAddr value. The address type
of this object is specified by the InetAddrType attribute."
DEFVAL { ''H }
::= { docsSubmgt3FilterGrpEntry 12 }
docsSubmgt3FilterGrpInetDestMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents which bits of a packet's
IP Destination Address are compared to match this rule.
An IP packet matches the rule when the packet's IP Destination
Address bitwise ANDed with the InetDestMask value
equals the InetDestAddr value. The address type
of this object is specified by InetAddrType."
DEFVAL { ''H }
::= { docsSubmgt3FilterGrpEntry 13 }
docsSubmgt3FilterGrpSrcPortStart OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the low-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets."
DEFVAL { 0 }
::= { docsSubmgt3FilterGrpEntry 14 }
docsSubmgt3FilterGrpSrcPortEnd OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the high-end inclusive
range of TCP/UDP source port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets."
DEFVAL { 65535 }
::= { docsSubmgt3FilterGrpEntry 15 }
docsSubmgt3FilterGrpDestPortStart OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the low-end inclusive
range of TCP/UDP destination port numbers to which a
packet is compared. This attribute is irrelevant for
non-TCP/UDP IP packets."
DEFVAL { 0 }
::= { docsSubmgt3FilterGrpEntry 16 }
docsSubmgt3FilterGrpDestPortEnd OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the high-end inclusive
range of TCP/UDP destination port numbers to which a packet
is compared. This attribute is irrelevant for non-TCP/UDP
IP packets."
DEFVAL { 65535 }
::= { docsSubmgt3FilterGrpEntry 17 }
docsSubmgt3FilterGrpDestMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the criteria to match against
an Ethernet packet MAC address bitwise ANDed
with DestMacMask."
DEFVAL { '000000000000'H }
::= { docsSubmgt3FilterGrpEntry 18 }
docsSubmgt3FilterGrpDestMacMask OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An Ethernet packet matches an entry when its
destination MAC address bitwise ANDed with
the DestMacMask attribute equals the value of
the DestMacAddr attribute."
DEFVAL { '000000000000'H }
::= { docsSubmgt3FilterGrpEntry 19 }
docsSubmgt3FilterGrpSrcMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the value to match against
an Ethernet packet source MAC address."
DEFVAL { 'FFFFFFFFFFFF'H }
::= { docsSubmgt3FilterGrpEntry 20 }
docsSubmgt3FilterGrpEnetProtocolType OBJECT-TYPE
SYNTAX INTEGER {
none(0),
ethertype(1),
dsap(2),
mac(3),
all(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute indicates the format of the layer 3
protocol ID in the Ethernet packet. A value of 'none'
means that the rule does not use the layer 3 protocol
type as a matching criteria. A value of 'ethertype'
means that the rule applies only to frames that contain
an EtherType value. EtherType values are contained
in packets using the DEC-Intel-Xerox (DIX) encapsulation
or the RFC 1042 Sub-Network Access Protocol
(SNAP) encapsulation formats. A value of 'dsap' means
that the rule applies only to frames using the IEEE802.3
encapsulation format with a Destination Service
Access Point (DSAP) other than 0xAA (which is reserved
for SNAP). A value of 'mac' means that the rule
applies only to MAC management messages for MAC management
messages. A value of 'all' means that the rule
matches all Ethernet packets. If the Ethernet frame
contains an 802.1P/Q Tag header (i.e., EtherType
0x8100), this attribute applies to the embedded EtherType
field within the 802.1p/Q header.
The value 'mac' is only used for passing UDCs to CMs during
Registration. The CMTS ignores filter rules that include
the value of this attribute set to 'mac' for CMTS enforced
upstream and downstream subscriber management filter group
rules."
REFERENCE
"RFC1042 Sub-Network Access Protocol (SNAP) encapsulation
formats."
DEFVAL { none }
::= { docsSubmgt3FilterGrpEntry 21 }
docsSubmgt3FilterGrpEnetProtocol OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the Ethernet protocol
type to be matched against the packets. For EnetProtocolType
set to 'none', this attribute is ignored when considering
whether a packet matches the current rule.
If the attribute EnetProtocolType is 'ethertype',
this attribute gives the 16-bit value of the EtherType
that the packet must match in order to match the rule.
If the attribute EnetProtocolType is 'dsap', the lower
8 bits of this attribute's value must match the DSAP
octet of the packet in order to match the rule. If the Ethernet
frame contains an 802.1p/Q Tag header (i.e.,
EtherType 0x8100), this attribute applies to the embedded
EtherType field within the 802.1p/Q header."
DEFVAL { 0 }
::= { docsSubmgt3FilterGrpEntry 22 }
docsSubmgt3FilterGrpUserPriLow OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute applies only to Ethernet frames using
the 802.1p/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority field and a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit Priority
field within the range of PriLow to PriHigh in order to
match this rule."
DEFVAL { 0 }
::= { docsSubmgt3FilterGrpEntry 23 }
docsSubmgt3FilterGrpUserPriHigh OBJECT-TYPE
SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute applies only to Ethernet frames using
the 802.1p/Q tag header (indicated with EtherType
0x8100). Such frames include a 16-bit Tag that contains
a 3-bit Priority field and a 12-bit VLAN number.
Tagged Ethernet packets must have a 3-bit Priority
field within the range of PriLow to PriHigh in order to
match this rule."
DEFVAL { 7 }
::= { docsSubmgt3FilterGrpEntry 24 }
docsSubmgt3FilterGrpVlanId OBJECT-TYPE
SYNTAX Unsigned32 (0 | 1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute applies only to Ethernet frames using
the 802.1p/Q tag header. Tagged packets must have
a VLAN Identifier that matches the value in order to
match the rule."
::= { docsSubmgt3FilterGrpEntry 25 }
docsSubmgt3FilterGrpClassPkts OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This attribute counts the number of packets
that have been classified (matched) using this rule
entry. This includes all packets delivered to a Service
Flow maximum rate policing function, whether
or not that function drops the packets. Discontinuities
in the value of this counter can occur at re-initialization
of the managed system, and at other times
as indicated by the value of ifCounterDiscontinuityTime
for the CM MAC Domain interface."
::= { docsSubmgt3FilterGrpEntry 26 }
docsSubmgt3FilterGrpFlowLabel OBJECT-TYPE
SYNTAX Unsigned32 (0..1048575)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents the Flow Label field in
the IPv6 header to be matched by the classifier.
The value zero indicates that the Flow Label is not specified
as part of the classifier and is not matched against packets."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I03-070223, IPv6 Flow
Label section in the Common Radio Frequency Interface
Encodings Annex."
::= { docsSubmgt3FilterGrpEntry 27 }
docsSubmgt3FilterGrpCmInterfaceMask OBJECT-TYPE
SYNTAX DocsL2vpnIfList
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This attribute represents a bit-mask of the CM in-bound
interfaces to which this classifier applies.
This attribute only applies to upstream Drop Classifiers
being sent to CMs during the registration process."
REFERENCE
"DOCSIS 3.0 MAC and Upper Layer Protocols Interface
Specification CM-SP-MULPIv3.0-I03-070223, CM
Interface Mask (CMIM) Encoding section in the Common
Radio Frequency Interface Encodings Annex."
::= { docsSubmgt3FilterGrpEntry 28 }
docsSubmgt3FilterGrpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The conceptual row status of this object."
::= { docsSubmgt3FilterGrpEntry 29 }
-- Conformance Definitions
docsSubmgt3MibConformance OBJECT IDENTIFIER ::= { docsSubmgt3Mib 2 }
docsSubmgt3MibCompliances OBJECT IDENTIFIER
::= { docsSubmgt3MibConformance 1 }
docsSubmgt3MibGroups OBJECT IDENTIFIER
::= { docsSubmgt3MibConformance 2 }
docsSubmgt3Compliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement the DOCSIS
Subscriber Management 3 MIB."
MODULE -- this MODULE
MANDATORY-GROUPS {
docsSubmgt3Group
}
::= { docsSubmgt3MibCompliances 1 }
docsSubmgt3Group OBJECT-GROUP
OBJECTS {
docsSubmgt3BaseCpeMaxIpv4Def,
docsSubmgt3BaseCpeMaxIpv6PrefixDef,
docsSubmgt3BaseCpeActiveDef,
docsSubmgt3BaseCpeLearnableDef,
docsSubmgt3BaseSubFilterDownDef,
docsSubmgt3BaseSubFilterUpDef,
docsSubmgt3BaseCmFilterDownDef,
docsSubmgt3BaseCmFilterUpDef,
docsSubmgt3BasePsFilterDownDef,
docsSubmgt3BasePsFilterUpDef,
docsSubmgt3BaseMtaFilterDownDef,
docsSubmgt3BaseMtaFilterUpDef,
docsSubmgt3BaseStbFilterDownDef,
docsSubmgt3BaseStbFilterUpDef,
docsSubmgt3CpeCtrlMaxCpeIpv4,
docsSubmgt3CpeCtrlMaxCpeIpv6Prefix,
docsSubmgt3CpeCtrlActive,
docsSubmgt3CpeCtrlLearnable,
docsSubmgt3CpeCtrlReset,
docsSubmgt3CpeCtrlLastReset,
docsSubmgt3CpeIpAddrType,
docsSubmgt3CpeIpAddr,
docsSubmgt3CpeIpAddrPrefixLen,
docsSubmgt3CpeIpLearned,
docsSubmgt3CpeIpType,
docsSubMgt3GrpUdcGroupIds,
docsSubMgt3GrpUdcSentInRegRsp,
docsSubmgt3GrpSubFilterDs,
docsSubmgt3GrpSubFilterUs,
docsSubmgt3GrpCmFilterDs,
docsSubmgt3GrpCmFilterUs,
docsSubmgt3GrpPsFilterDs,
docsSubmgt3GrpPsFilterUs,
docsSubmgt3GrpMtaFilterDs,
docsSubmgt3GrpMtaFilterUs,
docsSubmgt3GrpStbFilterDs,
docsSubmgt3GrpStbFilterUs,
docsSubmgt3FilterGrpAction,
docsSubmgt3FilterGrpPriority,
docsSubmgt3FilterGrpIpTosLow,
docsSubmgt3FilterGrpIpTosHigh,
docsSubmgt3FilterGrpIpTosMask,
docsSubmgt3FilterGrpIpProtocol,
docsSubmgt3FilterGrpInetAddrType,
docsSubmgt3FilterGrpInetSrcAddr,
docsSubmgt3FilterGrpInetSrcMask,
docsSubmgt3FilterGrpInetDestAddr,
docsSubmgt3FilterGrpInetDestMask,
docsSubmgt3FilterGrpSrcPortStart,
docsSubmgt3FilterGrpSrcPortEnd,
docsSubmgt3FilterGrpDestPortStart,
docsSubmgt3FilterGrpDestPortEnd,
docsSubmgt3FilterGrpDestMacAddr,
docsSubmgt3FilterGrpDestMacMask,
docsSubmgt3FilterGrpSrcMacAddr,
docsSubmgt3FilterGrpEnetProtocolType,
docsSubmgt3FilterGrpEnetProtocol,
docsSubmgt3FilterGrpUserPriLow,
docsSubmgt3FilterGrpUserPriHigh,
docsSubmgt3FilterGrpVlanId,
docsSubmgt3FilterGrpClassPkts,
docsSubmgt3FilterGrpFlowLabel,
docsSubmgt3FilterGrpCmInterfaceMask,
docsSubmgt3FilterGrpRowStatus
}
STATUS current
DESCRIPTION
"Group of objects implemented in the CMTS."
::= { docsSubmgt3MibGroups 1 }
END
Reference in New Issue View Git Blame Copy Permalink