mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
677 lines
24 KiB
Plaintext
677 lines
24 KiB
Plaintext
-- *****************************************************************
|
|
-- RFC standard DLUR MIB
|
|
--
|
|
-- June 1998, Vivian Tseng
|
|
--
|
|
-- Copyright (c) 1999 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
--
|
|
-- This mib was extracted from RFC 2232
|
|
|
|
|
|
APPN-DLUR-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString, TruthValue
|
|
FROM SNMPv2-TC
|
|
|
|
OBJECT-TYPE, MODULE-IDENTITY, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
|
|
snanauMIB
|
|
FROM SNA-NAU-MIB
|
|
|
|
SnaControlPointName
|
|
FROM APPN-MIB;
|
|
|
|
dlurMIB MODULE-IDENTITY
|
|
LAST-UPDATED "9705101500Z"
|
|
ORGANIZATION "IETF SNA NAU MIB WG / AIW APPN/HPR MIBs SIG"
|
|
CONTACT-INFO
|
|
|
|
"
|
|
Bob Clouston
|
|
Cisco Systems
|
|
7025 Kit Creek Road
|
|
P.O. Box 14987
|
|
Research Triangle Park, NC 27709, USA
|
|
Tel: 1 919 472 2333
|
|
E-mail: clouston@cisco.com
|
|
|
|
Bob Moore
|
|
IBM Corporation
|
|
800 Park Offices Drive
|
|
RHJA/664
|
|
P.O. Box 12195
|
|
Research Triangle Park, NC 27709, USA
|
|
Tel: 1 919 254 4436
|
|
E-mail: remoore@ralvm6.vnet.ibm.com
|
|
"
|
|
DESCRIPTION
|
|
"This is the MIB module for objects used to manage
|
|
network devices with DLUR capabilities. This MIB
|
|
contains information that is useful for managing an APPN
|
|
product that implements a DLUR (Dependent Logical Unit
|
|
Requester). The DLUR product has a client/server
|
|
relationship with an APPN product that implements a DLUS
|
|
(Dependent Logical Unit Server)."
|
|
|
|
::= { snanauMIB 5 }
|
|
-- snanauMIB ::= { mib-2 34 }
|
|
|
|
-- *********************************************************************
|
|
-- Textual Convention
|
|
-- *********************************************************************
|
|
-- SnaControlPointName is imported from the APPN MIB
|
|
|
|
-- *********************************************************************
|
|
dlurObjects OBJECT IDENTIFIER ::= { dlurMIB 1 }
|
|
-- *********************************************************************
|
|
|
|
|
|
dlurNodeInfo OBJECT IDENTIFIER ::= { dlurObjects 1 }
|
|
-- *********************************************************************
|
|
-- DLUR Capabilities of the node
|
|
--
|
|
-- This group represents the capabilities and options of the DLUR
|
|
-- implementation.
|
|
-- *********************************************************************
|
|
dlurNodeCapabilities OBJECT IDENTIFIER ::= { dlurNodeInfo 1 }
|
|
|
|
dlurNodeCpName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively assigned network name for the APPN node where
|
|
this DLUR implementation resides. If this object has the same
|
|
value as the appnNodeCpName object in the APPN MIB, then the
|
|
two objects are referring to the same APPN node."
|
|
|
|
::= { dlurNodeCapabilities 1 }
|
|
|
|
dlurReleaseLevel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (2))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The DLUR release level of this implementation. This is the
|
|
value that is encoded in the DLUR/DLUS Capabilites (CV 51).
|
|
To insure consistent display, this one-byte value is encoded
|
|
here as two displayable characters that are equivalent to a
|
|
hexadecimal display. For example, if the one-byte value as
|
|
encoded in CV51 is X'01', this object will contain the
|
|
displayable string '01'."
|
|
|
|
::= { dlurNodeCapabilities 2 }
|
|
|
|
dlurAnsSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
continueOrStop(1),
|
|
stopOnly(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Automatic Network Shutdown (ANS) capability of this node.
|
|
|
|
- 'continueOrStop' indicates that the DLUR implementation
|
|
supports either ANS value (continue or stop) as
|
|
specified by the DLUS on ACTPU for each PU.
|
|
|
|
- 'stopOnly' indicates that the DLUR implementation only
|
|
supports the ANS value of stop.
|
|
|
|
ANS = continue means that the DLUR node will keep LU-LU
|
|
sessions active even if SSCP-PU and SSCP-LU control sessions
|
|
are interrupted.
|
|
|
|
ANS = stop means that LU-LU sessions will be interrupted when
|
|
the SSCP-PU and SSCP-LU sessions are interrupted."
|
|
|
|
::= { dlurNodeCapabilities 3 }
|
|
|
|
dlurMultiSubnetSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of whether this DLUR implementation can support
|
|
CPSVRMGR sessions that cross NetId boundaries."
|
|
|
|
::= { dlurNodeCapabilities 4 }
|
|
|
|
dlurDefaultDefPrimDlusName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the defined default primary DLUS for all of
|
|
the PUs served by this DLUR. This can be overridden for a
|
|
particular PU by a defined primary DLUS for that PU,
|
|
represented by the dlurPuDefPrimDlusName object."
|
|
|
|
::= { dlurNodeCapabilities 5 }
|
|
|
|
dlurNetworkNameForwardingSupport OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of whether this DLUR implementation supports
|
|
forwarding of Network Name control vectors on ACTPUs and
|
|
ACTLUs to DLUR-served PUs and their associated LUs.
|
|
|
|
This object corresponds to byte 9. bit 3 of cv51."
|
|
|
|
::= { dlurNodeCapabilities 6 }
|
|
|
|
dlurNondisDlusDlurSessDeactSup OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indication of whether this DLUR implementation supports
|
|
nondisruptive deactivation of its DLUR-DLUS sessions.
|
|
Upon receiving from a DLUS an UNBIND for the CPSVRMGR pipe
|
|
with sense data X'08A0 000B', a DLUR that supports this
|
|
option immediately begins attempting to activate a CPSVRMGR
|
|
pipe with a DLUS other than the one that sent the UNBIND.
|
|
|
|
This object corresponds to byte 9. bit 4 of cv51."
|
|
|
|
::= { dlurNodeCapabilities 7 }
|
|
|
|
-- *********************************************************************
|
|
-- DLUR default defined backup DLUS table
|
|
-- *********************************************************************
|
|
|
|
dlurDefaultDefBackupDlusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DlurDefaultDefBackupDlusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains an ordered list of defined backup DLUSs
|
|
for all of the PUs served by this DLUR. These can be
|
|
overridden for a particular PU by a list of defined backup
|
|
DLUSs for that PU, represented by the
|
|
dlurPuDefBackupDlusNameTable. Entries in this table are
|
|
ordered from most preferred default backup DLUS to least
|
|
preferred."
|
|
|
|
::= { dlurNodeInfo 2 }
|
|
|
|
dlurDefaultDefBackupDlusEntry OBJECT-TYPE
|
|
SYNTAX DlurDefaultDefBackupDlusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is indexed by an integer-valued index, which
|
|
orders the entries from most preferred default backup DLUS
|
|
to least preferred."
|
|
|
|
INDEX { dlurDefaultDefBackupDlusIndex }
|
|
|
|
::= { dlurDefaultDefBackupDlusTable 1 }
|
|
|
|
DlurDefaultDefBackupDlusEntry ::= SEQUENCE {
|
|
dlurDefaultDefBackupDlusIndex Unsigned32,
|
|
dlurDefaultDefBackupDlusName SnaControlPointName
|
|
}
|
|
|
|
dlurDefaultDefBackupDlusIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Index for this table. The index values start at 1,
|
|
which identifies the most preferred default backup DLUS."
|
|
|
|
::= { dlurDefaultDefBackupDlusEntry 1 }
|
|
|
|
dlurDefaultDefBackupDlusName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fully qualified name of a default backup DLUS for PUs served
|
|
by this DLUR."
|
|
|
|
::= { dlurDefaultDefBackupDlusEntry 2 }
|
|
|
|
-- *********************************************************************
|
|
-- PU Information
|
|
--
|
|
-- The following table carries information about the PUs that this APPN
|
|
-- node is supporting via DLUR.
|
|
-- *********************************************************************
|
|
dlurPuInfo OBJECT IDENTIFIER ::= { dlurObjects 2 }
|
|
|
|
dlurPuTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DlurPuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about the PUs supported by this DLUR."
|
|
|
|
::= { dlurPuInfo 1 }
|
|
|
|
dlurPuEntry OBJECT-TYPE
|
|
SYNTAX DlurPuEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Entry in a table of PU information, indexed by PU name."
|
|
|
|
INDEX { dlurPuName }
|
|
|
|
::= { dlurPuTable 1 }
|
|
|
|
DlurPuEntry ::= SEQUENCE {
|
|
dlurPuName DisplayString,
|
|
dlurPuSscpSuppliedName DisplayString,
|
|
dlurPuStatus INTEGER,
|
|
dlurPuAnsSupport INTEGER,
|
|
dlurPuLocation INTEGER,
|
|
dlurPuLsName DisplayString,
|
|
dlurPuDlusSessnStatus INTEGER,
|
|
dlurPuActiveDlusName DisplayString,
|
|
dlurPuDefPrimDlusName DisplayString
|
|
}
|
|
|
|
dlurPuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Locally administered name of the PU."
|
|
|
|
::= { dlurPuEntry 1 }
|
|
|
|
|
|
dlurPuSscpSuppliedName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the PU. This value is supplied to a PU by the
|
|
SSCP that activated it. If a value has not been supplied, a
|
|
zero-length string is returned."
|
|
|
|
::= { dlurPuEntry 2 }
|
|
|
|
dlurPuStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
pendReqActpuRsp(2),
|
|
pendActpu(3),
|
|
pendActpuRsp(4),
|
|
active(5),
|
|
pendLinkact(6),
|
|
pendDactpuRsp(7),
|
|
pendInop(8),
|
|
pendInopActpu(9)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the DLUR-supported PU. The following values are
|
|
defined:
|
|
|
|
reset(1) - reset
|
|
pendReqActpuRsp(2) - pending a response from the DLUS
|
|
to a Request ACTPU
|
|
pendActpu(3) - pending an ACTPU from the DLUS
|
|
pendActpuRsp(4) - pending an ACTPU response from the PU
|
|
active(5) - active
|
|
pendLinkact(6) - pending activation of the link to a
|
|
downstream PU
|
|
pendDactpuRsp(7) - pending a DACTPU response from the PU
|
|
pendInop(8) - the CPSVRMGR pipe became inoperative
|
|
while the DLUR was pending an ACTPU
|
|
response from the PU
|
|
pendInopActpu(9) - when the DLUR was in the pendInop
|
|
state, a CPSVRMGR pipe became active
|
|
and a new ACTPU was received over it,
|
|
before a response to the previous
|
|
ACTPU was received from the PU."
|
|
|
|
::= { dlurPuEntry 3 }
|
|
|
|
dlurPuAnsSupport OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
continue(1),
|
|
stop(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Automatic Network Shutdown (ANS) support configured for
|
|
this PU. This value (as configured by the network
|
|
administrator) is sent by DLUS with ACTPU for each PU.
|
|
|
|
- 'continue' means that the DLUR node will attempt to keep
|
|
LU-LU sessions active even if SSCP-PU and SSCP-LU
|
|
control sessions are interrupted.
|
|
|
|
- 'stop' means that LU-LU sessions will be interrupted
|
|
when the SSCP-PU and SSCP-LU sessions are interrupted."
|
|
|
|
::= { dlurPuEntry 4 }
|
|
|
|
dlurPuLocation OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
internal(1),
|
|
downstream(2) }
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Location of the DLUR-support PU:
|
|
internal(1) - internal to the APPN node itself (no link)
|
|
downstream(2) - downstream of the APPN node (connected via
|
|
a link)."
|
|
|
|
::= { dlurPuEntry 5 }
|
|
|
|
dlurPuLsName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..10))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Administratively assigned name of the link station through
|
|
which a downstream PU is connected to this DLUR. A zero-length
|
|
string is returned for internal PUs. If this object has the
|
|
same value as the appnLsName object in the APPN MIB, then the
|
|
two are identifying the same link station."
|
|
|
|
::= { dlurPuEntry 6 }
|
|
|
|
dlurPuDlusSessnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
pendingActive(2),
|
|
active(3),
|
|
pendingInactive(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the control session to the DLUS identified in
|
|
dlurPuActiveDlusName. This is a combination of the separate
|
|
states for the contention-winner and contention-loser sessions:
|
|
|
|
reset(1) - none of the cases below
|
|
pendingActive(2) - either contention-winner session or
|
|
contention-loser session is pending active
|
|
active(3) - contention-winner and contention-loser
|
|
sessions are both active
|
|
pendingInactive(4) - either contention-winner session or
|
|
contention-loser session is pending
|
|
inactive - this test is made AFTER the
|
|
'pendingActive' test.
|
|
|
|
The following matrix provides a different representation of
|
|
how the values of this object are related to the individual
|
|
states of the contention-winner and contention-loser sessions:
|
|
|
|
Conwinner
|
|
| pA | pI | A | X = !(pA | pI | A)
|
|
C ++++++++++++++++++++++++++++++++++
|
|
o pA | 2 | 2 | 2 | 2
|
|
n ++++++++++++++++++++++++++++++++++
|
|
l pI | 2 | 4 | 4 | 4
|
|
o ++++++++++++++++++++++++++++++++++
|
|
s A | 2 | 4 | 3 | 1
|
|
e ++++++++++++++++++++++++++++++++++
|
|
r X | 2 | 4 | 1 | 1
|
|
++++++++++++++++++++++++++++++++++
|
|
"
|
|
|
|
::= { dlurPuEntry 7 }
|
|
|
|
dlurPuActiveDlusName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the active DLUS for this PU. If its length
|
|
is not zero, this name follows the SnaControlPointName textual
|
|
convention. A zero-length string indicates that the PU does
|
|
not currently have an active DLUS."
|
|
|
|
::= { dlurPuEntry 8 }
|
|
|
|
dlurPuDefPrimDlusName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..17))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of the defined primary DLUS for this PU, if one
|
|
has been defined. If present, this name follows the
|
|
SnaControlPointName textual convention. A zero-length string
|
|
indicates that no primary DLUS has been defined for this PU, in
|
|
which case the global default represented by the
|
|
dlurDefaultDefPrimDlusName object is used."
|
|
|
|
::= { dlurPuEntry 9 }
|
|
|
|
-- *****************************************
|
|
-- Defined backup DLUS table for a PU
|
|
-- *****************************************
|
|
|
|
dlurPuDefBackupDlusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DlurPuDefBackupDlusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table contains an ordered list of defined backup DLUSs
|
|
for those PUs served by this DLUR that have their own defined
|
|
backup DLUSs. PUs that have no entries in this table use the
|
|
global default backup DLUSs for the DLUR, represented by the
|
|
dlurDefaultDefBackupDlusNameTable. Entries in this table are
|
|
ordered from most preferred backup DLUS to least preferred for
|
|
each PU."
|
|
|
|
::= { dlurPuInfo 2 }
|
|
|
|
dlurPuDefBackupDlusEntry OBJECT-TYPE
|
|
SYNTAX DlurPuDefBackupDlusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is indexed by PU name and by an integer-valued
|
|
index, which orders the entries from most preferred backup DLUS
|
|
for the PU to least preferred."
|
|
|
|
INDEX { dlurPuDefBackupDlusPuName,
|
|
dlurPuDefBackupDlusIndex }
|
|
|
|
::= { dlurPuDefBackupDlusTable 1 }
|
|
|
|
DlurPuDefBackupDlusEntry ::= SEQUENCE {
|
|
dlurPuDefBackupDlusPuName DisplayString,
|
|
dlurPuDefBackupDlusIndex Unsigned32,
|
|
dlurPuDefBackupDlusName SnaControlPointName
|
|
}
|
|
|
|
dlurPuDefBackupDlusPuName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..17))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Locally administered name of the PU. If this object has the
|
|
same value as the dlurPuName object, then the two are
|
|
identifying the same PU."
|
|
|
|
::= { dlurPuDefBackupDlusEntry 1 }
|
|
|
|
dlurPuDefBackupDlusIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..4294967295)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Secondary index for this table. The index values start at 1,
|
|
which identifies the most preferred backup DLUS for the PU."
|
|
|
|
::= { dlurPuDefBackupDlusEntry 2 }
|
|
|
|
dlurPuDefBackupDlusName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Fully qualified name of a backup DLUS for this PU."
|
|
|
|
::= { dlurPuDefBackupDlusEntry 3 }
|
|
|
|
-- *********************************************************************
|
|
-- DLUS Control Sessions (CPSVRMGR Pipes)
|
|
--
|
|
-- This table contains information about DLUS control sessions, also
|
|
-- known as CPSVRMGR pipes. Although DLUR uses a pair of CPSVRMGR
|
|
-- sessions for communication, for the purpose of status, information
|
|
-- about these two sessions is combined to yield a single status for the
|
|
-- requester/server connection.
|
|
-- *********************************************************************
|
|
|
|
dlurDlusInfo OBJECT IDENTIFIER ::= { dlurObjects 3 }
|
|
|
|
dlurDlusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DlurDlusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Information about DLUS control sessions."
|
|
|
|
::= { dlurDlusInfo 1}
|
|
|
|
dlurDlusEntry OBJECT-TYPE
|
|
SYNTAX DlurDlusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This entry is indexed by the name of the DLUS."
|
|
INDEX { dlurDlusName }
|
|
|
|
::= { dlurDlusTable 1 }
|
|
|
|
DlurDlusEntry ::= SEQUENCE {
|
|
dlurDlusName SnaControlPointName,
|
|
dlurDlusSessnStatus INTEGER
|
|
}
|
|
|
|
dlurDlusName OBJECT-TYPE
|
|
SYNTAX SnaControlPointName
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The SNA name of a DLUS with which this DLUR currently has a
|
|
CPSVRMGR pipe established."
|
|
|
|
::= { dlurDlusEntry 1 }
|
|
|
|
dlurDlusSessnStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
reset(1),
|
|
pendingActive(2),
|
|
active(3),
|
|
pendingInactive(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Status of the CPSVRMGR pipe between the DLUR and this DLUS.
|
|
This is a combination of the separate states for the
|
|
contention-winner and contention-loser sessions:
|
|
|
|
reset(1) - none of the cases below
|
|
pendingActive(2) - either contention-winner session or
|
|
contention-loser session is pending active
|
|
active(3) - contention-winner and contention-loser
|
|
sessions are both active
|
|
pendingInactive(4) - either contention-winner session or
|
|
contention-loser session is pending
|
|
inactive - this test is made AFTER the
|
|
'pendingActive' test.
|
|
|
|
The following matrix provides a different representation of
|
|
how the values of this object are related to the individual
|
|
states of the contention-winner and contention-loser sessions:
|
|
|
|
Conwinner
|
|
| pA | pI | A | X = !(pA | pI | A)
|
|
C ++++++++++++++++++++++++++++++++++
|
|
o pA | 2 | 2 | 2 | 2
|
|
n ++++++++++++++++++++++++++++++++++
|
|
l pI | 2 | 4 | 4 | 4
|
|
o ++++++++++++++++++++++++++++++++++
|
|
s A | 2 | 4 | 3 | 1
|
|
e ++++++++++++++++++++++++++++++++++
|
|
r X | 2 | 4 | 1 | 1
|
|
++++++++++++++++++++++++++++++++++
|
|
"
|
|
|
|
::= { dlurDlusEntry 2 }
|
|
|
|
-- ***************************************************************
|
|
-- Conformance information
|
|
-- ***************************************************************
|
|
|
|
dlurConformance OBJECT IDENTIFIER ::= { dlurMIB 2 }
|
|
|
|
dlurCompliances OBJECT IDENTIFIER ::= { dlurConformance 1 }
|
|
dlurGroups OBJECT IDENTIFIER ::= { dlurConformance 2 }
|
|
|
|
-- Compliance statements
|
|
|
|
dlurCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for the SNMPv2 entities which
|
|
implement the DLUR MIB."
|
|
|
|
MODULE -- this module
|
|
|
|
-- Unconditionally mandatory groups
|
|
MANDATORY-GROUPS { dlurConfGroup }
|
|
|
|
::= { dlurCompliances 1 }
|
|
|
|
-- Units of conformance
|
|
dlurConfGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
dlurNodeCpName,
|
|
dlurReleaseLevel,
|
|
dlurAnsSupport,
|
|
dlurMultiSubnetSupport,
|
|
dlurNetworkNameForwardingSupport,
|
|
dlurNondisDlusDlurSessDeactSup,
|
|
dlurDefaultDefPrimDlusName,
|
|
dlurDefaultDefBackupDlusName,
|
|
dlurPuSscpSuppliedName,
|
|
dlurPuStatus,
|
|
dlurPuAnsSupport,
|
|
dlurPuLocation,
|
|
dlurPuLsName,
|
|
dlurPuDlusSessnStatus,
|
|
dlurPuActiveDlusName,
|
|
dlurPuDefPrimDlusName,
|
|
dlurPuDefBackupDlusName,
|
|
dlurDlusSessnStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing information on an
|
|
implementation of APPN DLUR."
|
|
|
|
::= { dlurGroups 1 }
|
|
|
|
-- end of conformance statement
|
|
|
|
END
|
|
|