MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-SVC-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

5905 lines
179 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ciscoWanSvcMIB - SVC MIB
--
-- April 2000, Wendy Cheng
--
-- Copyright (c) 1999-2003 by Cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-WAN-SVC-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Counter32, Integer32
FROM SNMPv2-SMI
DisplayString,
RowStatus,
TimeStamp,
TruthValue,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
ifIndex,
InterfaceIndex
FROM IF-MIB
PnniNodeId, PnniPortId
FROM PNNI-MIB
AtmAddress, NetPrefix
FROM ATM-FORUM-TC-MIB
CiscoWanNsapAtmAddress
FROM CISCO-WAN-ATM-CONN-MIB
stratacom
FROM CISCOWAN-SMI;
ciscoWANSvcMIB MODULE-IDENTITY
LAST-UPDATED "200303100000Z"
ORGANIZATION "Cisco System, Inc"
CONTACT-INFO "Cisco Systems Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95143
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB modules describe an ATM network service
on a BPX-SES or a MGX ATM switch. This MIB module
provides configuring, provisioning, as well as status
gathering for ATM services.
Abbreviation used:
ABR -- Available Bit Rate
AINI -- ATM Inter-Network Interface
ATM -- Asynchronous Transfer Mode
BGN -- Begin
BW -- Bandwidth
CBR -- Constant Bit Rate
ENNI -- Enhanced Network to Network Interface
Note: The 'ENNI' term used here indicating
'enhanced' or 'friendly' NNI for linking
two networks of CISCO AutoRoute or PNNI
switches. The XPVCs and XPVPs are
provisioned across them. Functionality
includes changing segment OAM cell handling
so that these cells flow over 'end-to-end
OAM segment' loops for the provisioned
length of the XPVC or XPVP, i.e. the
'segment' comprises the two or three
segments between the user ports. Also
implemented at ENNIs is an LMI
functionality that enables
auto-discovery of the ENNIs.
ER -- Error Recovery
GAT -- Generic Application Transport
IE -- Information Element
IISP -- Interim Inter-Switch Signaling Protocol
ILMI -- Interim Local Management Interface
MD -- Management Data
PNNI -- Private Network-Network Interface
RS -- Resynchronization
REJ -- Rejection
SD -- Sequence Data
SDP -- Sequence Data with Poll
SPVC -- Soft Permanent Virtual Circuit
SSCOP -- Service Specific Connection Oriented Protocol
SVC -- Switched Virtual Circuit
UBR -- Unspecified Bit Rate
UD -- Unit Data
UNI -- User-Network Interface
USTAT -- Unsolicited STAT
VBR -- Variable Bit Rate"
REVISION "200303100000Z"
DESCRIPTION
"a) Modified to have characters/line to be less than 72
and add range for Integer32.
b) Modified to use cwspConfigGrp3 in
ciscoWANSvcMIBCompliance3.
"
REVISION "200209160000Z"
DESCRIPTION
"a) Added 'cwspSpvcAddress' to cwspConfigTable."
REVISION "200203010000Z"
DESCRIPTION
"a) Added 'cwspRoutingPriority' object in cwspConfigTable.
b) The DEFVAL clause for 'cwspUniVersion' and
'cwspNniVersion' is changed to 'unsupported(7)' from
'uni31'. The DESCRIPTION is modified for these
objects."
REVISION "200107190000Z"
DESCRIPTION
"The change is to back out previous revision. The
requirement was changed."
REVISION "200107060000Z"
DESCRIPTION
"The change is to use 'unsupoerted(7)' as default for both
'cwspUniVersion' and 'cwspNniVersion'.
DESCRIPTION modified for both variables as well."
REVISION "200106060000Z"
DESCRIPTION
"The change is to add 'self(9)' enumeration to
'cwspUniVersion'. This value is used to indicate
a voice port."
REVISION "200105100000Z"
DESCRIPTION
"The changes are as follows:
(1) Add one mib variable 'cwspConnTraceLastNode'.
(2) Add 'unsupported(7)'to 'cwspNniVersion' variable.
(3) Add additional comments in DESCRIPTION of
'cwspNniVersion' and 'cwspUniVersion' variables.
(4) Corrected spelling error."
REVISION "200010200000Z"
DESCRIPTION
"The changes are as follows:
(1) Description for 'ENNI' is added.
(2) cwspNniVersion -- enumeration enni(4) and
aini(5) are added.
(3) cwspOperNniSigVersion -- enumeration aini(5)
is added."
REVISION "200009010000Z"
DESCRIPTION
"The changes are as follows:
(1) The default value of cwspMinSvccVci is changed to 35.
(2) The lower range of cwspMaxSvccVci changed to 35."
REVISION "200008030000Z"
DESCRIPTION
"Importing symbol stratacom from CISCOWAN-SMI
instead from BASIS-MIB."
REVISION "200006150000Z"
DESCRIPTION
"The changes are as follows.
(1) The lower bound and upper bound of the following
MIB objects has been changed from 0 to 1 and from
100 to 200 respectively.
(i) cwspUtilFactorCbr
(ii) cwspUtilFactorRtVbr
(iii) cwspUtilFactorNrtVbr
(iv) cwspUtilFactorAbr
(v) cwspUtilFactorUbr
(2) The lower bound of cwspMinSvccVci object has been
changed from 32 to 0."
REVISION "200004010000Z"
DESCRIPTION
"This is the initial version of this MIB module."
::= { stratacom 140 }
ciscoWANSvcMIBObjects OBJECT IDENTIFIER
::= { ciscoWANSvcMIB 1 }
ciscoWANSvcInfo OBJECT IDENTIFIER
::= { ciscoWANSvcMIBObjects 1 }
ciscoWANSvcPort OBJECT IDENTIFIER
::= { ciscoWANSvcMIBObjects 2 }
ciscoWANPnniRouting OBJECT IDENTIFIER
::= { ciscoWANSvcMIBObjects 3 }
ciscoWANSpvc OBJECT IDENTIFIER
::= { ciscoWANSvcMIBObjects 4 }
cwspConfig OBJECT IDENTIFIER ::= { ciscoWANSvcPort 1 }
cwspCacConfig OBJECT IDENTIFIER ::= { ciscoWANSvcPort 2 }
cwspSigConfig OBJECT IDENTIFIER ::= { ciscoWANSvcPort 3 }
cwspSscopConfig OBJECT IDENTIFIER ::= { ciscoWANSvcPort 4 }
cwspCallStats OBJECT IDENTIFIER ::= { ciscoWANSvcPort 5 }
cwspSigStats OBJECT IDENTIFIER ::= { ciscoWANSvcPort 6 }
cwspSscopStats OBJECT IDENTIFIER ::= { ciscoWANSvcPort 7 }
cwspCall OBJECT IDENTIFIER ::= { ciscoWANSvcPort 8 }
cwspAbrCall OBJECT IDENTIFIER ::= { ciscoWANSvcPort 9 }
cwspPrefix OBJECT IDENTIFIER ::= { ciscoWANSvcPort 10 }
cwspAddress OBJECT IDENTIFIER ::= { ciscoWANSvcPort 11 }
cwspRegAddress OBJECT IDENTIFIER ::= { ciscoWANSvcPort 12 }
cwspLoad OBJECT IDENTIFIER ::= { ciscoWANSvcPort 13 }
cwspConnTrace OBJECT IDENTIFIER ::= { ciscoWANSvcPort 14 }
cwspOperation OBJECT IDENTIFIER ::= { ciscoWANSvcPort 15 }
-- TEXTUAL CONVENTIONS USED IN THIS MIB
CwspSpvcState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines possible failures at an endpoint.
The following are implemented:
genSpvcErr(1) -- General SPVC error,
sRecvSetupConfmMismatch(12)
-- Connection ATM Conformance type
-- mismatch with master at slave endpoint.
sRecvSetupServMismatch(13)
-- Connection Service type mismatch with
-- master at slave endpoint.
sRecvSetupTrafParmMismatch(14),
-- Traffic parameters mismatch with master
-- at slave endpoint.
masterSpvcAutoDelete(15)
-- Controller auto deleting provisioned
-- master SPVC.
and slaveSpvcAutoDelete(16)
-- Controller auto deleting provisioned
-- slave SPVC."
SYNTAX INTEGER {
genSpvcErr(1),
mPvcDelFail(2),
sPvcDelFail(3),
mRelPendHalfTmout(4),
mInstlPvcFail(5),
sInstlPvcFail(6),
mRecmtPvcFail(7),
sRecmtPvcFail(8),
mCmtHalfFail(9),
sCmtHalfFail(10),
mInstlXconnFail(11),
sRecvSetupConfmMismatch(12),
sRecvSetupServMismatch(13),
sRecvSetupTrafParmMismatch(14),
masterSpvcAutoDelete(15),
slaveSpvcAutoDelete(16)
}
CwspControllerState ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Defines possible state for the pnni
controller."
SYNTAX INTEGER {
ready(1),
unavilable(2)
}
-- the system group
-- svc information group
cwsSwRevision OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"PNNI network controller software revision number."
::= { ciscoWANSvcInfo 1 }
cwsControllerStatus OBJECT-TYPE
SYNTAX CwspControllerState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status for the pnni active
controller."
::= { ciscoWANSvcInfo 6 }
cwspPnniStndbyControllerStatus OBJECT-TYPE
SYNTAX CwspControllerState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status for the standby controller."
::= { ciscoWANSvcInfo 7 }
cwspPnniControllerStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
stndby(2),
unavailable(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The administrative status of the pnni controller.
Note: this object is only used in the trap varbind,
snmp get operation is meaningless."
::= { ciscoWANSvcInfo 8 }
cwspPnniControllerPhySlot OBJECT-TYPE
SYNTAX Integer32(1..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pnni controller physical location
for MGX or BPX-SES. Note: this object
is only used in the trap varbind, snmp
get operation is meaningless."
::= { ciscoWANSvcInfo 9 }
-- the port SSCOP configuration table
cwspSscopTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspSscopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies SSCOP (Layer 2)
configuration parameters."
::= { cwspSscopConfig 1 }
cwspSscopEntry OBJECT-TYPE
SYNTAX CwspSscopEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the SSCOP configuration table.
Each entry indexed by the ifIndex of a port."
INDEX { ifIndex }
::= { cwspSscopTable 1 }
CwspSscopEntry ::= SEQUENCE {
cwspSscopTmrCC Integer32,
cwspSscopTmrKeepAlive Integer32,
cwspSscopTmrNoResp Integer32,
cwspSscopTmrPoll Integer32,
cwspSscopTmtIdle Integer32,
cwspSscopMaxCC Integer32,
cwspSscopMaxPD Integer32,
cwspSscopMaxSTAT Integer32
}
cwspSscopTmrCC OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the value for Connection
control timer."
DEFVAL { 1 }
::= { cwspSscopEntry 1 }
cwspSscopTmrKeepAlive OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the value for keep
alive timer "
DEFVAL { 5 }
::= { cwspSscopEntry 2 }
cwspSscopTmrNoResp OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the value for no
response timer."
DEFVAL { 30 }
::= { cwspSscopEntry 3 }
cwspSscopTmrPoll OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the value for poll timer."
DEFVAL { 1 }
::= { cwspSscopEntry 4 }
cwspSscopTmtIdle OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the value for idle timer."
DEFVAL { 10 }
::= { cwspSscopEntry 5 }
cwspSscopMaxCC OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains the upper limit for the number
of transmissions of a BGN, END, ER or RS PDU."
DEFVAL { 10 }
::= { cwspSscopEntry 6 }
cwspSscopMaxPD OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains an upper limit for a counter
which counts the number of SD PDUs transmitted between
transmissions of POLL PDUs or the number of SD PDUs
transmitted before the transmission of the first POLL
PDU after POLL timer became active."
DEFVAL { 10 }
::= { cwspSscopEntry 7 }
cwspSscopMaxSTAT OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object contains an upper limit for
the number of list elements placed in a
STAT PDU."
DEFVAL { 67 }
::= { cwspSscopEntry 8 }
-- the port SSCOP statistics
cwspSscopStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspSscopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains SSCOP (Layer 2) statistics
counters."
::= { cwspSscopStats 1 }
cwspSscopStatsEntry OBJECT-TYPE
SYNTAX CwspSscopStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains SSCOP (Layer 2) statistics."
INDEX { ifIndex }
::= { cwspSscopStatsTable 1 }
CwspSscopStatsEntry ::= SEQUENCE {
cwspSscopCounterReset INTEGER,
cwspSscopIgnoredPduRcv Counter32,
cwspSscopBgnRcv Counter32,
cwspSscopBgakRcv Counter32,
cwspSscopEndRcv Counter32,
cwspSscopEndakRcv Counter32,
cwspSscopRsRcv Counter32,
cwspSscopRsakRcv Counter32,
cwspSscopBgrejRcv Counter32,
cwspSscopSdRcv Counter32,
cwspSscopSdpRcv Counter32,
cwspSscopPollRcv Counter32,
cwspSscopStatRcv Counter32,
cwspSscopUstatRcv Counter32,
cwspSscopUdRcv Counter32,
cwspSscopMdRcv Counter32,
cwspSscopErakRcv Counter32,
cwspSscopBgnXmt Counter32,
cwspSscopBgakXmt Counter32,
cwspSscopEndXmt Counter32,
cwspSscopEndakXmt Counter32,
cwspSscopRsXmt Counter32,
cwspSscopRsakXmt Counter32,
cwspSscopBgrejXmt Counter32,
cwspSscopSdXmt Counter32,
cwspSscopSdpXmt Counter32,
cwspSscopPollXmt Counter32,
cwspSscopStatXmt Counter32,
cwspSscopUstatXmt Counter32,
cwspSscopUdXmt Counter32,
cwspSscopMdXmt Counter32,
cwspSscopErakXmt Counter32
}
cwspSscopCounterReset OBJECT-TYPE
SYNTAX INTEGER {
noop(1),
reset(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the SSCOP
statistics collected for this interface
needs to be reset."
DEFVAL { noop }
::= { cwspSscopStatsEntry 1 }
cwspSscopIgnoredPduRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
PDUs that are received but ignored due to
incorrect size, invalid PDU, unknown PDU
type."
::= { cwspSscopStatsEntry 2 }
cwspSscopBgnRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
BGN PDUs received at this interface."
::= { cwspSscopStatsEntry 3 }
cwspSscopBgakRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
BGN ACK PDUs received at this interface."
::= { cwspSscopStatsEntry 4 }
cwspSscopEndRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
END PDUs received at this interface."
::= { cwspSscopStatsEntry 5 }
cwspSscopEndakRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
END ACK PDUs received at this interface."
::= { cwspSscopStatsEntry 6 }
cwspSscopRsRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
RS(Resync) PDUs received at this interface."
::= { cwspSscopStatsEntry 7 }
cwspSscopRsakRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
RS(Resync) ACK PDUs received at this interface."
::= { cwspSscopStatsEntry 8 }
cwspSscopBgrejRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
BGN REJ PDUs received at this interface."
::= { cwspSscopStatsEntry 9 }
cwspSscopSdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
SD (Sequenced Data) PDUs received at
this interface."
::= { cwspSscopStatsEntry 10 }
cwspSscopSdpRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
SDP (Sequenced Data with Poll) PDUs received
at this interface."
::= { cwspSscopStatsEntry 11 }
cwspSscopPollRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
POLL PDUs received at this interface."
::= { cwspSscopStatsEntry 12 }
cwspSscopStatRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
STAT PDUs received at this interface."
::= { cwspSscopStatsEntry 13 }
cwspSscopUstatRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
USTAT (Unsolicited STAT) PDUs received
at this interface."
::= { cwspSscopStatsEntry 14 }
cwspSscopUdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
UD (Unit data) PDUs received at this
interface."
::= { cwspSscopStatsEntry 15 }
cwspSscopMdRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
MD (Management data) PDUs received
at this interface."
::= { cwspSscopStatsEntry 16 }
cwspSscopErakRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
ER ACK (error recovery ack) PDUs received
at this interface."
::= { cwspSscopStatsEntry 17 }
cwspSscopBgnXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
BGN PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 18 }
cwspSscopBgakXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
BGN ACK PDUs transmitted on this interface."
::= { cwspSscopStatsEntry 19 }
cwspSscopEndXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
END PDUs transmitted on this interface."
::= { cwspSscopStatsEntry 20 }
cwspSscopEndakXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
END ACK PDUs transmitted on this interface."
::= { cwspSscopStatsEntry 21 }
cwspSscopRsXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
RS (Resync) PDUs transmitted over this
interface."
::= { cwspSscopStatsEntry 22 }
cwspSscopRsakXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
RS (Resync) ACK PDUs transmitted over
this interface."
::= { cwspSscopStatsEntry 23 }
cwspSscopBgrejXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
BGN REJ PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 24 }
cwspSscopSdXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
SD transmitted over this interface."
::= { cwspSscopStatsEntry 25 }
cwspSscopSdpXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
SDP PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 26 }
cwspSscopPollXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
POLL PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 27 }
cwspSscopStatXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
STAT PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 28 }
cwspSscopUstatXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
USTAT PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 29 }
cwspSscopUdXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
UD PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 30 }
cwspSscopMdXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
MD PDUs transmitted over this interface."
::= { cwspSscopStatsEntry 31 }
cwspSscopErakXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object stores the number of SSCOP
ER(error recovery) ACK PDUs transmitted
over this interface."
::= { cwspSscopStatsEntry 32 }
-- the port signaling configuration table
cwspSigConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspSigConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies signaling
configuration parameters."
::= { cwspSigConfig 1 }
cwspSigConfigEntry OBJECT-TYPE
SYNTAX CwspSigConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the signaling configuration
table. Each entry indexed by the ifIndex of
a port."
INDEX { ifIndex }
::= { cwspSigConfigTable 1 }
CwspSigConfigEntry ::= SEQUENCE {
cwspSigCfgT301 Integer32,
cwspSigCfgT303 Integer32,
cwspSigCfgT308 Integer32,
cwspSigCfgT310 Integer32,
cwspSigCfgT316 Integer32,
cwspSigCfgT317 Integer32,
cwspSigCfgT322 Integer32,
cwspSigCfgT397 Integer32,
cwspSigCfgT398 Integer32,
cwspSigCfgT399 Integer32
}
cwspSigCfgT301 OBJECT-TYPE
SYNTAX Integer32 (150..240)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when ALERT message received
at Call Received State. Normally, timer is
stopped when CONNECT message is
received. Clear call at first expiry."
DEFVAL { 180 }
::= { cwspSigConfigEntry 1 }
cwspSigCfgT303 OBJECT-TYPE
SYNTAX Integer32 (4..8)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when SETUP message sent at
Call Present State. Normally, timer is
stopped when ALERT, CONNECT, RELEASE
COMPLETE or CALL PROCEEDING message is
received. Resend SETUP message and restart
the timer at first expiry; Clear network
connection and enter NULL state at second
expiry."
DEFVAL { 4 }
::= { cwspSigConfigEntry 2 }
cwspSigCfgT308 OBJECT-TYPE
SYNTAX Integer32 (20..45)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when RELEASE message sent at
Release Indication State. Normally, timer is
stopped when RELEASE COMPLETE or RELEASE
message is received. Resend RELEASE and
restart the timer at first expiry; Release
call reference and enter NULL state at
second expiry."
DEFVAL { 30 }
::= { cwspSigConfigEntry 3 }
cwspSigCfgT310 OBJECT-TYPE
SYNTAX Integer32(10..120)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when CALL PROCEEDING message
received at Incoming Call Proceeding State.
Normally, timer is stopped when ALERT,
CONNECT or RELEASE message is received.
Clear call at first expiry. Range from 10 to
20 seconds for UNI 3.0/3.1 with default
of 10; 30 to 120 seconds for UNI 4.0 with
default of 30, default number can be 10 or
30, 10 is used."
DEFVAL { 10 }
::= { cwspSigConfigEntry 4 }
cwspSigCfgT316 OBJECT-TYPE
SYNTAX Integer32 (90..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when RESTART message sent
Restart Request State. Normally, timer is
stopped when RESTART ACK message is
received. RESTART may be sent multiple times
in both first or second expiry."
DEFVAL { 90 }
::= { cwspSigConfigEntry 5 }
cwspSigCfgT317 OBJECT-TYPE
SYNTAX Integer32 (60..300)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when RESTART message received
at Restart State. Normally, timer is stopped when
Internal clearing of call references happen.
Maintenance notification at first expiry.
The value of this timer should be less
than T316."
DEFVAL { 60 }
::= { cwspSigConfigEntry 6 }
cwspSigCfgT322 OBJECT-TYPE
SYNTAX Integer32 (4..20)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when STATUS ENQUIRY message
sent at any call state. Normally, timer is
stopped when STATUS RELEASE or
RELEASE COMPLETE message is received.
STATUS ENQUIREY message may be resent several
times in both first or second expiry."
DEFVAL { 4 }
::= { cwspSigConfigEntry 7 }
cwspSigCfgT397 OBJECT-TYPE
SYNTAX Integer32 (180..240)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer started when ALERTING or PARTY ALERTING
message received in point-to-multipoint call.
Normally timer is stopped when ADD
PARTY ACK message is received. Clear party at
first expiry."
DEFVAL { 180 }
::= { cwspSigConfigEntry 8 }
cwspSigCfgT398 OBJECT-TYPE
SYNTAX Integer32 (4..20)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer is started when DROP PARTY message sent at Drop Party
Initiated State. Normally, timer is stopped when DROP PARTY
ACK or RELEASE message is received. Send DROP PARTY ACK or
RELEASE at first expiry."
DEFVAL { 4 }
::= { cwspSigConfigEntry 9 }
cwspSigCfgT399 OBJECT-TYPE
SYNTAX Integer32(14..124)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Timer is started when ADD PARTY message sent at
Add Party Initiated State. Normally, timer is
stopped when ADD PARTY ACK, ADD PARTY REJ or RELEASE
message is received. Clear the party and enter NULL Party
State at first expiry. Range from 14 to 28 seconds for
UNI 3.0/3.1 with default of 14; 34
to 124 seconds for UNI 4.0 with default of 34,
default can be 14 or 34, 14 is used."
DEFVAL { 14 }
::= { cwspSigConfigEntry 10 }
-- the port signaling statistics
cwspSigStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains signaling statistics counters"
::= { cwspSigStats 1 }
cwspSigStatsEntry OBJECT-TYPE
SYNTAX CwspSigStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains signaling statistics."
INDEX { ifIndex }
::= { cwspSigStatsTable 1 }
CwspSigStatsEntry ::= SEQUENCE {
cwspSigCounterReset INTEGER,
cwspCallProcRcv Counter32,
cwspConnectRcv Counter32,
cwspConnectAckRcv Counter32,
cwspSetupRcv Counter32,
cwspReleaseRcv Counter32,
cwspReleaseComplRcv Counter32,
cwspRestartRcv Counter32,
cwspRestartAckRcv Counter32,
cwspStatusRcv Counter32,
cwspStatusEnqRcv Counter32,
cwspNotifyRcv Counter32,
cwspAlertRcv Counter32,
cwspProgressRcv Counter32,
cwspAddPtyRcv Counter32,
cwspAddPtyAckRcv Counter32,
cwspAddPtyRejRcv Counter32,
cwspDropPtyRcv Counter32,
cwspIncorrectMsgRcv Counter32,
cwspTimerExpiries Counter32,
cwspLastCause Counter32,
cwspLastDiagnostic Integer32,
cwspCallProcXmt Counter32,
cwspConnectXmt Counter32,
cwspConnectAckXmt Counter32,
cwspSetupXmt Counter32,
cwspReleaseXmt Counter32,
cwspReleaseComplXmt Counter32,
cwspRestartXmt Counter32,
cwspRestartAckXmt Counter32,
cwspStatusXmt Counter32,
cwspStatusEnqXmt Counter32,
cwspNotifyXmt Counter32,
cwspAlertXmt Counter32,
cwspProgressXmt Counter32,
cwspAddPtyXmt Counter32,
cwspAddPtyAckXmt Counter32,
cwspAddPtyRejXmt Counter32,
cwspDropPtyXmt Counter32,
cwspSscopStatus INTEGER
}
cwspSigCounterReset OBJECT-TYPE
SYNTAX INTEGER {
noop(1), -- none of following
reset(2) -- resetting
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a 2 to this object resets the all Sig counters."
DEFVAL { noop }
::= { cwspSigStatsEntry 1 }
cwspCallProcRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CALL PROCEEDING messages received
on this interface."
::= { cwspSigStatsEntry 2 }
cwspConnectRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CONNECT messages received
on this interface."
::= { cwspSigStatsEntry 3 }
cwspConnectAckRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CONNECT ACK messages received
on this interface."
::= { cwspSigStatsEntry 4 }
cwspSetupRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of SETUP messages received
on this interface."
::= { cwspSigStatsEntry 5 }
cwspReleaseRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RELEASE messages received
on this interface."
::= { cwspSigStatsEntry 6 }
cwspReleaseComplRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RELEASE COMPLETE messages received
on this interface."
::= { cwspSigStatsEntry 7 }
cwspRestartRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RESTART messages received
on this interface."
::= { cwspSigStatsEntry 8 }
cwspRestartAckRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RESTART ACK messages received
on this interface."
::= { cwspSigStatsEntry 9 }
cwspStatusRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of STATUS messages received
on this interface."
::= { cwspSigStatsEntry 10 }
cwspStatusEnqRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of STATUS ENQUIRY messages received
on this interface."
::= { cwspSigStatsEntry 11 }
cwspNotifyRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of NOTIFY messages received on this interface."
::= { cwspSigStatsEntry 12 }
cwspAlertRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ALERT messages received on this interface."
::= { cwspSigStatsEntry 13 }
cwspProgressRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PROGRESS messages received on this interface."
::= { cwspSigStatsEntry 14 }
cwspAddPtyRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ADD PARTY messages received on this interface."
::= { cwspSigStatsEntry 15 }
cwspAddPtyAckRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ADD PARTY ACK messages received
on this interface."
::= { cwspSigStatsEntry 16 }
cwspAddPtyRejRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ADD PARTY REJECT messages received
on this interface."
::= { cwspSigStatsEntry 17 }
cwspDropPtyRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DROP PARTY messages received on this interface."
::= { cwspSigStatsEntry 18 }
cwspIncorrectMsgRcv OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of Incorrect messages received on this interface."
::= { cwspSigStatsEntry 20 }
cwspTimerExpiries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of timeouts occurred on this interface."
::= { cwspSigStatsEntry 21 }
cwspLastCause OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"to indicate the last cause of release or cranckback."
::= { cwspSigStatsEntry 22 }
cwspLastDiagnostic OBJECT-TYPE
SYNTAX Integer32(-2147483648..214743647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"to indicate the last diagnostic of release or cranckback."
::= { cwspSigStatsEntry 23 }
cwspCallProcXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CALL PROCEEDING messages transmitted from this
interface."
::= { cwspSigStatsEntry 24 }
cwspConnectXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CONNECT messages transmitted from this
interface."
::= { cwspSigStatsEntry 25 }
cwspConnectAckXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of CONNECT ACK messages transmitted from this
interface."
::= { cwspSigStatsEntry 26 }
cwspSetupXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of SETUP messages transmitted from this
interface."
::= { cwspSigStatsEntry 27 }
cwspReleaseXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RELEASE messages transmitted from this
interface."
::= { cwspSigStatsEntry 28 }
cwspReleaseComplXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RELEASE COMPLETE messages transmitted from this
interface."
::= { cwspSigStatsEntry 29 }
cwspRestartXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RESTART messages transmitted from this
interface."
::= { cwspSigStatsEntry 30 }
cwspRestartAckXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RESTART ACK messages transmitted from this
interface."
::= { cwspSigStatsEntry 31 }
cwspStatusXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of STATUS messages transmitted from this
interface."
::= { cwspSigStatsEntry 32 }
cwspStatusEnqXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of STATUS ENQUIRY messages transmitted from this
interface."
::= { cwspSigStatsEntry 33 }
cwspNotifyXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of NOTIFY messages transmitted from this
interface."
::= { cwspSigStatsEntry 34 }
cwspAlertXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ALERT messages transmitted from this
interface."
::= { cwspSigStatsEntry 35 }
cwspProgressXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of PROGRESS messages transmitted from this
interface."
::= { cwspSigStatsEntry 36 }
cwspAddPtyXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ADD PARTY messages transmitted from this
interface."
::= { cwspSigStatsEntry 37 }
cwspAddPtyAckXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ADD PARTY ACK messages transmitted from this
interface."
::= { cwspSigStatsEntry 38 }
cwspAddPtyRejXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of ADD PARTY REJECT messages transmitted from this
interface."
::= { cwspSigStatsEntry 39 }
cwspDropPtyXmt OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of DROP PARTY messages transmitted
from this interface."
::= { cwspSigStatsEntry 40 }
cwspSscopStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1), -- sscop link is established
down(2) -- sscop link is tailed
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Sscop link status on an NNI interface,
object is meaningful along with
ciscoWANSscopLinkChange trap."
::= { cwspSigStatsEntry 42 }
-- the interface configuration table
cwspConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Interface configuration table collects
attributes that affect the operation of the
controller interface. There is a single row
for each interface that the managed system
is expected to be added or managed."
::= { cwspConfig 1 }
cwspConfigEntry OBJECT-TYPE
SYNTAX CwspConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry in the interface configuration table containing
information about an interface"
INDEX { ifIndex }
::= { cwspConfigTable 1 }
CwspConfigEntry ::= SEQUENCE {
cwspAdminStatus INTEGER,
cwspOperStatus INTEGER,
cwspSvcBlocked TruthValue,
cwspSpvcBlocked TruthValue,
cwspIlmiAddrRegEnable TruthValue,
cwspIlmiAutoConfEnable TruthValue,
cwspIlmiServRegEnable TruthValue,
cwspPhyIdentifier DisplayString,
cwspSignallingVpi Integer32,
cwspSignallingVci Integer32,
cwspRoutingVpi Integer32,
cwspRoutingVci Integer32,
cwspMaxVpiBits Integer32,
cwspMaxVciBits Integer32,
cwspUniVersion INTEGER,
cwspNniVersion INTEGER,
cwspUniType INTEGER,
cwspSide INTEGER,
cwspMaxP2pCalls Integer32,
cwspMaxP2mpRoots Integer32,
cwspMaxP2mpLeafs Integer32,
cwspMinSvccVpi Integer32,
cwspMaxSvccVpi Integer32,
cwspMinSvccVci Integer32,
cwspMaxSvccVci Integer32,
cwspMinSvpcVpi Integer32,
cwspMaxSvpcVpi Integer32,
cwspEnhancedIisp TruthValue,
cwspConfigTableRowStatus RowStatus,
cwspAddrPlanSupported INTEGER,
cwspIlmiSecureLink TruthValue,
cwspIlmiAttachmentPoint TruthValue,
cwspIlmiLocalAttrStd TruthValue,
cwspIlmiUCSMEnable TruthValue,
cwspRoutingPriority Integer32,
cwspSpvcAddress CiscoWanNsapAtmAddress
}
cwspAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
inService(1),
outService(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The administrative status of the interface.
inService (1) means that the interface is
operational while outService (2) indicates
that the interface is put out of service by
the administrator."
DEFVAL { outService }
::= { cwspConfigEntry 1 }
cwspOperStatus OBJECT-TYPE
SYNTAX INTEGER {
ok(1),
failed(2),
other(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the interface. This status
is derived from the physical state of the interface.
failed (2) indicates that the interface has failed.
ok (1) indicates that the interface is in
operational status, while other (3) denotes that
the interface is in an unknown state."
::= { cwspConfigEntry 2 }
cwspSvcBlocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether Switches virtual connections are
allowed through this interface."
DEFVAL { false }
::= { cwspConfigEntry 3 }
cwspSpvcBlocked OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether soft permanent virtual
connections are allowed through this interface."
DEFVAL { false }
::= { cwspConfigEntry 4 }
cwspIlmiAddrRegEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether ILMI address registration is
enabled or disabled."
DEFVAL { true }
::= { cwspConfigEntry 5 }
cwspIlmiAutoConfEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether auto-configuration of the
interface is turned on or off. If
auto-configuration is enabled, then the interface
comes up using the ILMI auto-configuration."
DEFVAL { true }
::= { cwspConfigEntry 6 }
cwspIlmiServRegEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether service registry is
enabled or disabled on the interface."
DEFVAL { true }
::= { cwspConfigEntry 7 }
cwspPhyIdentifier OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the physical identification of the interface.
Mandatory when the port is provisioned for the
first time through SNMP."
::= { cwspConfigEntry 8 }
cwspSignallingVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Denotes the Signaling VPI used on the interface."
DEFVAL { 0 }
::= { cwspConfigEntry 9 }
cwspSignallingVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the signaling VCI used on the
interface, acceptable value is 32-65535,
and 5 being the default."
DEFVAL { 5 }
::= { cwspConfigEntry 10 }
cwspRoutingVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the VPI used for PNNI lowest level RCC."
DEFVAL { 0 }
::= { cwspConfigEntry 11 }
cwspRoutingVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the VCI used for the PNNI lowest
level RCC, acceptable value is 32-65535, and
18 being the default."
DEFVAL { 18 }
::= { cwspConfigEntry 12 }
cwspMaxVpiBits OBJECT-TYPE
SYNTAX Integer32 (0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active VPI bits on this
ATM Interface. For virtual interfaces (i.e. Virtual
Path Connections used by PNNI), this value has
no meaning and is set to zero."
::= { cwspConfigEntry 13 }
cwspMaxVciBits OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active VCI bits
on this ATM Interface."
::= { cwspConfigEntry 14 }
cwspUniVersion OBJECT-TYPE
SYNTAX INTEGER {
uni20(1),
uni30(2),
uni31(3),
uni40(4),
ituDss2(5),
frf4(6),
unsupported(7),
ip(8),
self(9)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of the latest version of the ATM Forum UNI
Signaling Specification that is supported on this ATM
Interface. If this value is not present, a version of the
UNI earlier than 3.1 is supported.
The value of 'self(9)' indicates this entry is a voice port.
If the peer IME's value of this object is the same as, or
later than the local IME's value, then the version
corresponding to the local IME's value should be attempted.
Otherwise, if the peer IME's value of this object is earlier,
and supported locally, then the local IME should attempt the
version corresponding to the peer IME's value. Otherwise,
compatibility of the two IMEs cannot be assumed."
DEFVAL { unsupported }
::= { cwspConfigEntry 15 }
cwspNniVersion OBJECT-TYPE
SYNTAX INTEGER {
iisp30(1),
iisp31(2),
pnni10(3),
enni(4),
aini(5),
unsupported(7)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"An indication of the latest version of the ATM Forum
PNNI Signaling Specification that is supported on this
ATM Interface. Note that the PNNI routing version is not
determined through ILMI.
If the peer IME's value of this object is the same as,
or later than the local IME's value, then the version
corresponding to the local IME's value should be
attempted. Otherwise, if the peer IME's value of this
object is earlier, and supported locally, then the
local IME should attempt the version corresponding to
the peer IME's value. Otherwise, compatibility of the
two IMEs cannot be assumed."
DEFVAL { unsupported }
::= { cwspConfigEntry 16 }
cwspUniType OBJECT-TYPE
SYNTAX INTEGER { public(1), private(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of the ATM device, either public or private."
DEFVAL { private }
::= { cwspConfigEntry 17 }
cwspSide OBJECT-TYPE
SYNTAX INTEGER { user(1), network(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object determines the type of the ATM device. This
object is used in automatic ATM Interface-Type determination
procedure such that a correct operational ATM Interface-type
can be determined. An ATM End System shall take the value of
user(1), and an ATM network node shall take the value of
node(2)."
DEFVAL { network }
::= { cwspConfigEntry 18 }
cwspMaxP2pCalls OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum number of point to
point calls (including VCs and VPs allowed
on the interface."
DEFVAL { 10000 }
::= { cwspConfigEntry 19 }
cwspMaxP2mpRoots OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum number of root VCs
(for point-to-multipoint) allowed on the interface."
DEFVAL { 1000 }
::= { cwspConfigEntry 20 }
cwspMaxP2mpLeafs OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum number of leaf VCs
(for point-to-multipoint) allowed on the interface."
DEFVAL { 4095 }
::= { cwspConfigEntry 21 }
cwspMinSvccVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the minimum SVCC VPI configured on
the interface."
DEFVAL { 0 }
::= { cwspConfigEntry 22 }
cwspMaxSvccVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum SVCC VPI configured on
the interface."
DEFVAL { 4095 }
::= { cwspConfigEntry 23 }
cwspMinSvccVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the minimum SVCC VCI configured on
the interface."
DEFVAL { 35 }
::= { cwspConfigEntry 24 }
cwspMaxSvccVci OBJECT-TYPE
SYNTAX Integer32 (35..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum SVCC VCI configured on
the interface."
DEFVAL { 65535 }
::= { cwspConfigEntry 25 }
cwspMinSvpcVpi OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the minimum SVPC VPI configured on
the interface."
DEFVAL { 1 }
::= { cwspConfigEntry 26 }
cwspMaxSvpcVpi OBJECT-TYPE
SYNTAX Integer32 (1..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates the maximum SVPC VPI configured on
the interface."
DEFVAL { 4095 }
::= { cwspConfigEntry 27 }
cwspEnhancedIisp OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether the enhanced features for IISP
are enabled or disabled."
DEFVAL { false }
::= { cwspConfigEntry 28 }
cwspConfigTableRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create and delete the Interface. However, only
createAndGo, destroy, active and notInService are supported.
NMS should only use createAndGo to create a row and destroy to
delete a row. The managed device will either return active or
notInService for a row status."
::= { cwspConfigEntry 29 }
cwspAddrPlanSupported OBJECT-TYPE
SYNTAX INTEGER { both(1), aesa(2), e164(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ATM address plan supported on an interface. This can
only be modified if interface is public UNI. For all other
interfaces, the value is aesa."
DEFVAL { aesa }
::= { cwspConfigEntry 30 }
cwspIlmiSecureLink OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether ILMI Secure Link Protocol is enabled or
disabled. When secure link protocol is enabled, loss in ILMI
connectivity is treated as loss of attachment point which
results in all SVCs/SVPs being released on the interface."
DEFVAL { true }
::= { cwspConfigEntry 31 }
cwspIlmiAttachmentPoint OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether detection of loss of attachment
procedures are enabled on this interface. When set
to true, then standard ILMI procedures are employed
to detect loss of attachment point. If set to false,
then ILMI protocol on the interface does not detect
the loss of attachment."
DEFVAL { true }
::= { cwspConfigEntry 32 }
cwspIlmiLocalAttrStd OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether on modification of local attributes,
procedures as recommended by ILMI 4.0 specification
are followed or cisco proprietery procedures are
followed. When set to true, the standard ILMI procedures
are followed."
DEFVAL { true }
::= { cwspConfigEntry 33 }
cwspIlmiUCSMEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Indicates whether ILMI user connection status monitoring
is enabled or disabled."
DEFVAL { true }
::= { cwspConfigEntry 34 }
cwspRoutingPriority OBJECT-TYPE
SYNTAX Integer32(1..15)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is the routing priority to be assigned
to connections which enter the network from this
ingress interface, but does not carry the routing
priority signaling in the SETUP message. SETUP
message. A default routing priority of 8 is used if
this object is not configured. A routing priority 1
is the highest priority for a user connection.
A connection tagged with a routing priority of 1
is derouted ahead of connections tagged with other
priority values."
DEFVAL { 8 }
::= { cwspConfigEntry 35 }
cwspSpvcAddress OBJECT-TYPE
SYNTAX CiscoWanNsapAtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the internal NSAP assigned
to a port by the switch.
a) The format is that of 13-byte node prefix and
7-byte port number.
b) When the switch's node prefix is modified,
the node prefix part of this variable is also
changed accordingly. Note: the switch's node
prefix cannot be changed if there are
connections on the switch.
c) The port number can be physical port identifier
or the ifIndex of this port."
::= { cwspConfigEntry 36 }
-- the port call statistics table
cwspCallStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Table contains objects showing the Statistics for
SVC/SPVC calls on a given interface."
::= { cwspCallStats 1 }
cwspCallStatsEntry OBJECT-TYPE
SYNTAX CwspCallStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains SVC/SPVC call statistics"
INDEX { ifIndex }
::= { cwspCallStatsTable 1 }
CwspCallStatsEntry ::= SEQUENCE {
cwspCountReset INTEGER,
cwspInCallAttempts Counter32,
cwspInCallEstabs Counter32,
cwspInCallFailures Counter32,
cwspInFilterFailures Counter32,
cwspInRouteFailures Counter32,
cwspInResrcFailures Counter32,
cwspInTimerFailures Counter32,
cwspInCrankbacks Counter32,
cwspOutCallAttempts Counter32,
cwspOutCallEstabs Counter32,
cwspOutCallFailures Counter32,
cwspOutFilterFailures Counter32,
cwspOutRouteFailures Counter32,
cwspOutResrcFailures Counter32,
cwspOutTimerFailures Counter32,
cwspOutCrankbacks Counter32
}
cwspCountReset OBJECT-TYPE
SYNTAX INTEGER {
noop(1), -- none of following
reset(2) -- resetting
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Writing a 2 to this object resets all counters."
DEFVAL { noop }
::= { cwspCallStatsEntry 1 }
cwspInCallAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of incoming Signaling messages
(Setup and Add Party) received by the switching node on this
interface for Call establishment."
::= { cwspCallStatsEntry 2 }
cwspInCallEstabs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of incoming Signaling Messages
(Connect and Add Party Ack) received by the switching node on
this interface which marks that a call has been successfully
established."
::= { cwspCallStatsEntry 3 }
cwspInCallFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the total number of incoming Point-to-Point
(p2p) and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts
failed on this interface."
::= { cwspCallStatsEntry 4 }
cwspInFilterFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of incoming Point-to-Point(p2p)
and Point-to-MultiPoint(p2mp) SVC/SPVC call attempts which
failed due to address filtering on this interface."
::= { cwspCallStatsEntry 5 }
cwspInRouteFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of incoming Point-to-Point(p2p)
and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this
interface which failed because there was no route to the
destination available."
::= { cwspCallStatsEntry 6 }
cwspInResrcFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of incoming Point-to-Point(p2p)
and Point-to-MulitPoint(p2mp) SVC/SPVC call attempts on this
interface which failed because there were not enough resources
as requested in the parameters of the call."
::= { cwspCallStatsEntry 7 }
cwspInTimerFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of signaling timers timed out for
incoming Point-to-Point(p2p) and Point-to-MultiPoint(p2mp)
SVC/SPVC calls on this interface."
::= { cwspCallStatsEntry 8 }
cwspInCrankbacks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of Crankback IEs received on this
interface for incoming Point-to-Point(p2p) and
Point-to-MultiPoint (p2mp) SVC/SPVC call attempts."
::= { cwspCallStatsEntry 9 }
cwspOutCallAttempts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of outgoing Signaling messages
(Setup and Add Party) on this interface for Call
establishment."
::= { cwspCallStatsEntry 10 }
cwspOutCallEstabs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of outgoing Signaling messages
(Connect and Add Party Ack) which mark the call being
established on this interface"
::= { cwspCallStatsEntry 11 }
cwspOutCallFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the total number of outgoing Signaling
messages for Point-to-Point and Point-to-MultiPoint call
establishment on this interface which failed."
::= { cwspCallStatsEntry 12 }
cwspOutFilterFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of outgoing Signaling messages
for call establishment on this interface which failed the
address filtering."
::= { cwspCallStatsEntry 13 }
cwspOutRouteFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of outgoing Signaling messages
for call establishment on this interface which failed because
the route was not available."
::= { cwspCallStatsEntry 14 }
cwspOutResrcFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of outgoing Signaling messages
for call establishment on this interface which failed because
the resource requested was not available."
::= { cwspCallStatsEntry 15 }
cwspOutTimerFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of Signaling timers timed-out on
this interface for outgoing signaling messages."
::= { cwspCallStatsEntry 16 }
cwspOutCrankbacks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the number of Crankback IEs being sent on
this interface for outgoing signaling Release messages. This
is generated on the node which generates the Crankback
IEs."
::= { cwspCallStatsEntry 17 }
-- the port prefix table
cwspPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table specifying the network prefix(es)
used for ILMI address registration."
::= { cwspPrefix 1 }
cwspPrefixEntry OBJECT-TYPE
SYNTAX CwspPrefixEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single network prefix contained
in the prefix table."
INDEX { ifIndex, cwspNetPrefix }
::= { cwspPrefixTable 1 }
CwspPrefixEntry ::= SEQUENCE {
cwspNetPrefix NetPrefix,
cwspPrefixRowStatus RowStatus
}
cwspNetPrefix OBJECT-TYPE
SYNTAX NetPrefix
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network prefix specified for use in ILMI address
registration."
::= { cwspPrefixEntry 1 }
cwspPrefixRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Used to create, delete, activate and de-activate
network prefixes used in ILMI address registration."
::= { cwspPrefixEntry 2 }
-- the port address table
cwspAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Interface ATM Address Table. This table contains all the
attributes necessary to determine what the PNNI entity believes
is reachable in terms of ATM End System Addresses and to
determine which nodes are advertising this reachability. This
table is also used to configure static routes to reachable
addresses. Entries in this table can be created/deleted by
setting the intfAddressRowStatus object to appropriate values.
Existing entries in this table cannot be modified. Entries in
this table can also be created/deleted through the command
provided by the CLI."
::= { cwspAddress 1 }
cwspAddressEntry OBJECT-TYPE
SYNTAX CwspAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about a
reachable address."
INDEX { ifIndex, cwspAtmAddress, cwspAddrLen }
::= { cwspAddressTable 1 }
CwspAddressEntry ::= SEQUENCE {
cwspAtmAddress AtmAddress,
cwspAddrLen INTEGER,
cwspAddrType INTEGER,
cwspAddrProto INTEGER,
cwspAddrPlan INTEGER,
cwspAddrScope INTEGER,
cwspAddrRedistribute TruthValue,
cwspAddressRowStatus RowStatus
}
cwspAtmAddress OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of the ATM End System Address."
::= { cwspAddressEntry 1 }
cwspAddrLen OBJECT-TYPE
SYNTAX INTEGER (0..160)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address length in bits to be applied to the ATM End
System Address."
::= { cwspAddressEntry 2 }
cwspAddrType OBJECT-TYPE
SYNTAX INTEGER { internal(1), exterior(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of reachability from the advertising node to the
address. This variable indicates either this ATM address
('internal') is a reachable ATM destination that is directly
attached to the logical node advertising this address or an
ATM address('exterior') that can be reached through a PNNI
routing domain but which is not located in that routing
domain."
REFERENCE
"ATM Forum PNNI 1.0 Section 5.8.1.3"
DEFVAL { exterior }
::= { cwspAddressEntry 3 }
cwspAddrProto OBJECT-TYPE
SYNTAX INTEGER { local(1), static(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The routing mechanism via which the connectivity from the
advertising node to the reachable address was learned. A
'local' address indicates this address is automatically
advertised. A 'static' address is not automatically
advertised. By setting 'cwspAddrRedistribute' variable
(see below) to 'true' will force a 'static' address
to be advertised."
DEFVAL { local }
::= { cwspAddressEntry 4 }
cwspAddrPlan OBJECT-TYPE
SYNTAX INTEGER { e164(1), nsap(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address plan. For NSAP address, the first byte of the
address automatically implies one of the three NSAP address
plans: NSAP E.164, NSAP DCC or NSAP ICD."
DEFVAL { nsap }
::= { cwspAddressEntry 5 }
cwspAddrScope OBJECT-TYPE
SYNTAX INTEGER (0..104)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The PNNI scope of advertisement (i.e. level of PNNI hierarchy)
of the reachability from the advertising node to the address."
DEFVAL { 0 }
::= { cwspAddressEntry 6 }
cwspAddrRedistribute OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Whether or not the reachable address specified by this entry
is to be advertised by the local node into its PNNI routing
domain. This object is only meaningful if the routing mechanism
(cwspAddrProto) is static."
DEFVAL { false }
::= { cwspAddressEntry 7 }
cwspAddressRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"To create or delete a reachable address. Note that
NMS should use CreateAndGo to create a row and Destroy
to delete a row. The managed device will return
active or notInService as row status."
::= { cwspAddressEntry 8 }
-- the UNI port registered address
cwspRegAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspRegAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains a list of ATM addresses that can
be used for calls to and from a given interface by a
switch or service. The ATM addresses are registered by
the endsystem via ILMI. ILMI registered addresses
cannot be deleted using this table. This table only
applies to switches and network services."
::= { cwspRegAddress 1 }
cwspRegAddressEntry OBJECT-TYPE
SYNTAX CwspRegAddressEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the ATM Interface Registered Address
table."
INDEX { ifIndex, cwspRegAtmAddress }
::= { cwspRegAddressTable 1 }
CwspRegAddressEntry ::= SEQUENCE {
cwspRegAtmAddress AtmAddress,
cwspRegAddressOrgSscope INTEGER
}
cwspRegAtmAddress OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An address registered for a given switch or service
interface."
::= { cwspRegAddressEntry 1 }
cwspRegAddressOrgSscope OBJECT-TYPE
SYNTAX INTEGER { localNetwork(1), global(15) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates the organizational scope for
the referenced address. The information of the
referenced address shall not be distributed outside
the indicated scope.
The default values for organizational scope are
localNetwork(1) for ATM group addresses, and
global(15) for individual addresses."
DEFVAL { global }
::= { cwspRegAddressEntry 2 }
-- the port CAC configuration Table
cwspCacConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspCacConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table specifying the CAC(Connection Admission Control)
information for each interface."
::= { cwspCacConfig 1 }
cwspCacConfigEntry OBJECT-TYPE
SYNTAX CwspCacConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry contains CAC information."
INDEX { ifIndex }
::= { cwspCacConfigTable 1 }
CwspCacConfigEntry ::= SEQUENCE {
cwspUtilFactorCbr Integer32,
cwspUtilFactorRtVbr Integer32,
cwspUtilFactorNrtVbr Integer32,
cwspUtilFactorAbr Integer32,
cwspUtilFactorUbr Integer32,
cwspMaxBwCbr Integer32,
cwspMaxBwRtVbr Integer32,
cwspMaxBwNrtVbr Integer32,
cwspMaxBwAbr Integer32,
cwspMaxBwUbr Integer32,
cwspMinBwCbr Integer32,
cwspMinBwRtVbr Integer32,
cwspMinBwNrtVbr Integer32,
cwspMinBwAbr Integer32,
cwspMinBwUbr Integer32,
cwspMaxVcCbr Integer32,
cwspMaxVcRtVbr Integer32,
cwspMaxVcNrtVbr Integer32,
cwspMaxVcAbr Integer32,
cwspMaxVcUbr Integer32,
cwspMinVcCbr Integer32,
cwspMinVcRtVbr Integer32,
cwspMinVcNrtVbr Integer32,
cwspMinVcAbr Integer32,
cwspMinVcUbr Integer32,
cwspMaxVcBwCbr Integer32,
cwspMaxVcBwRtVbr Integer32,
cwspMaxVcBwNrtVbr Integer32,
cwspMaxVcBwAbr Integer32,
cwspMaxVcBwUbr Integer32,
cwspDefaultCdvtCbr Integer32,
cwspDefaultCdvtRtVbr Integer32,
cwspDefaultCdvtNrtVbr Integer32,
cwspDefaultCdvtAbr Integer32,
cwspDefaultCdvtUbr Integer32,
cwspDefaultMbsRtVbr Integer32,
cwspDefaultMbsNrtVbr Integer32
}
cwspUtilFactorCbr OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the booking factor for CBR service."
DEFVAL { 100 }
::= { cwspCacConfigEntry 1 }
cwspUtilFactorRtVbr OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the booking factor for real time VBR service"
DEFVAL { 100 }
::= { cwspCacConfigEntry 2 }
cwspUtilFactorNrtVbr OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the booking factor for non-real time VBR service "
DEFVAL { 100 }
::= { cwspCacConfigEntry 3 }
cwspUtilFactorAbr OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the booking factor for ABR service"
DEFVAL { 100 }
::= { cwspCacConfigEntry 4 }
cwspUtilFactorUbr OBJECT-TYPE
SYNTAX Integer32 (1..200)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the booking factor for UBR service."
DEFVAL { 100 }
::= { cwspCacConfigEntry 5 }
cwspMaxBwCbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth for CBR service in percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 6 }
cwspMaxBwRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth for real time VBR service in
percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 7 }
cwspMaxBwNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth for non-real time VBR service
in percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 8 }
cwspMaxBwAbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth for ABR service in percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 9 }
cwspMaxBwUbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth for UBR service in percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 10 }
cwspMinBwCbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum bandwidth for CBR service in percentage.
The total values of cwspMinBwCbr, cwspMinBwRtVbr,
cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 11 }
cwspMinBwRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum bandwidth for real time VBR service in
percentage. The total values of cwspMinBwCbr, cwspMinBwRtVbr,
cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 12 }
cwspMinBwNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum bandwidth for non-real time VBR service
in percentage.
The total values of cwspMinBwCbr, cwspMinBwRtVbr,
cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 13 }
cwspMinBwAbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum bandwidth for ABR service in percentage.
The total values of cwspMinBwCbr, cwspMinBwRtVbr,
cwspMinBwNrtVbr, cwspMinBwAbr and cwspMinBwUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 14 }
cwspMinBwUbr OBJECT-TYPE
SYNTAX Integer32(0..1000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the minimum bandwidth for UBR service in percentage.
The value for this variable is always 0."
::= { cwspCacConfigEntry 15 }
cwspMaxVcCbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum number of VCs for CBR service in
percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%. "
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 16 }
cwspMaxVcRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum number of VCs for real time VBR service
in percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 17 }
cwspMaxVcNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum number of VCs for non-real time VBR
service in percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 18 }
cwspMaxVcAbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum number of VCs for ABR service in
percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%. "
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 19 }
cwspMaxVcUbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum number of VCs for UBR service in
percentage.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 1000000 }
::= { cwspCacConfigEntry 20 }
cwspMinVcCbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum number of VCs for CBR service in
percentage.
The values of cwspMinVcCbr, cwspMinVcRtVbr,
cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed
1000000, i.e. 100%.
This variable is interpreted in the format of xxx.xxxx. For
example a value of 750000 is interpreted as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 21 }
cwspMinVcRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum number of VCs for real time VBR service
in percentage.
The values of cwspMinVcCbr, cwspMinVcRtVbr,
cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 22 }
cwspMinVcNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum number of VCs for non-real time VBR
service in percentage.
The values of cwspMinVcCbr, cwspMinVcRtVbr,
cwspMinVcNrtVbr,cwspMinVcAbr and cwspMinVcUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 23 }
cwspMinVcAbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum number of VCs for ABR service in
percentage.
The values of cwspMinVcCbr, cwspMinVcRtVbr,
cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 24 }
cwspMinVcUbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the minimum number of VCs for UBR service in
percentage.
The values of cwspMinVcCbr, cwspMinVcRtVbr,
cwspMinVcNrtVbr, cwspMinVcAbr and cwspMinVcUbr can not exceed
1000000, i.e. 100%.
The value of this variable is interpreted in the format of
xxx.xxxx. For example a value of 750000 is interpreted
as 75.0000%."
DEFVAL { 0 }
::= { cwspCacConfigEntry 25 }
cwspMaxVcBwCbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth allowed for a VC for real time
CBR service.
The value is in the unit of cells per second."
DEFVAL { 0 }
::= { cwspCacConfigEntry 26 }
cwspMaxVcBwRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth allowed for a VC for real time
VBR service.
The value is in the unit of cells per second."
DEFVAL { 0 }
::= { cwspCacConfigEntry 27 }
cwspMaxVcBwNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth allowed for a VC for non-real
time VBR service.
The value is in the unit of cells per second."
DEFVAL { 0 }
::= { cwspCacConfigEntry 28 }
cwspMaxVcBwAbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth allowed for a VC for ABR
service.
The value is in the unit of cells per second. "
DEFVAL { 0 }
::= { cwspCacConfigEntry 29 }
cwspMaxVcBwUbr OBJECT-TYPE
SYNTAX Integer32 (0..1000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the maximum bandwidth allowed for UBR service.
The value is in the unit of cells per second."
DEFVAL { 0 }
::= { cwspCacConfigEntry 30 }
cwspDefaultCdvtCbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the default CDVT for CBR service."
DEFVAL { 1024 }
::= { cwspCacConfigEntry 31 }
cwspDefaultCdvtRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the default CDVT real time VBR service."
DEFVAL { 1024 }
::= { cwspCacConfigEntry 32 }
cwspDefaultCdvtNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the default CDVT non-real time VBR service."
DEFVAL { 1024 }
::= { cwspCacConfigEntry 33 }
cwspDefaultCdvtAbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the default CDVT for ABR service."
DEFVAL { 1024 }
::= { cwspCacConfigEntry 34 }
cwspDefaultCdvtUbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the default CDVT for UBR service."
DEFVAL { 1024 }
::= { cwspCacConfigEntry 35 }
cwspDefaultMbsRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the default MBS real time VBR service."
DEFVAL { 1024 }
::= { cwspCacConfigEntry 36 }
cwspDefaultMbsNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the default MBS non-real time VBR service."
DEFVAL { 1024 }
::= { cwspCacConfigEntry 37 }
-- the port loading table
cwspLoadTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspLoadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table specifying the load information for each
interface."
::= { cwspLoad 1 }
cwspLoadEntry OBJECT-TYPE
SYNTAX CwspLoadEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry contains the load information."
INDEX { ifIndex }
::= { cwspLoadTable 1 }
CwspLoadEntry ::= SEQUENCE {
cwspLoadBwTotal Integer32,
cwspLoadMaxBwCbr Integer32,
cwspLoadMaxBwRtVbr Integer32,
cwspLoadMaxBwNrtVbr Integer32,
cwspLoadMaxBwAbr Integer32,
cwspLoadMaxBwUbr Integer32,
cwspLoadBwAvail Integer32,
cwspLoadAvlBwCbr Integer32,
cwspLoadAvlBwRtVbr Integer32,
cwspLoadAvlBwNrtVbr Integer32,
cwspLoadAvlBwAbr Integer32,
cwspLoadAvlBwUbr Integer32,
cwspLoadVcAvail Integer32,
cwspLoadAvlVcCbr Integer32,
cwspLoadAvlVcRtVbr Integer32,
cwspLoadAvlVcNrtVbr Integer32,
cwspLoadAvlVcAbr Integer32,
cwspLoadAvlVcUbr Integer32,
cwspLoadCtdCbr Integer32,
cwspLoadCtdRtVbr Integer32,
cwspLoadCtdNrtVbr Integer32,
cwspLoadCtdAbr Integer32,
cwspLoadCtdUbr Integer32,
cwspLoadCdvCbr Integer32,
cwspLoadCdvRtVbr Integer32,
cwspLoadCdvNrtVbr Integer32,
cwspLoadCdvAbr Integer32,
cwspLoadCdvUbr Integer32,
cwspLoadClr0Cbr Integer32,
cwspLoadClr0RtVbr Integer32,
cwspLoadClr0NrtVbr Integer32,
cwspLoadClr0Abr Integer32,
cwspLoadClr0Ubr Integer32,
cwspLoadClr01Cbr Integer32,
cwspLoadClr01RtVbr Integer32,
cwspLoadClr01NrtVbr Integer32,
cwspLoadClr01Abr Integer32,
cwspLoadClr01Ubr Integer32,
cwspLoadMinGurCrCbr Integer32,
cwspLoadMinGurCrRtVbr Integer32,
cwspLoadMinGurCrNrtVbr Integer32,
cwspLoadMinGurCrAbr Integer32,
cwspLoadMinGurCrUbr Integer32
}
cwspLoadBwTotal OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total bandwidth of the interface."
::= { cwspLoadEntry 1 }
cwspLoadMaxBwCbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum bandwith for CBR service."
::= { cwspLoadEntry 2 }
cwspLoadMaxBwRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwith for real time VBR service."
::= { cwspLoadEntry 3 }
cwspLoadMaxBwNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwith for non-real time VBR service."
::= { cwspLoadEntry 4 }
cwspLoadMaxBwAbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum bandwith for ABR service."
::= { cwspLoadEntry 5 }
cwspLoadMaxBwUbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The maximum bandwith for UBR service."
::= { cwspLoadEntry 6 }
cwspLoadBwAvail OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total available bandwidth of the interface."
::= { cwspLoadEntry 7 }
cwspLoadAvlBwCbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available bandwith for CBR service."
::= { cwspLoadEntry 8 }
cwspLoadAvlBwRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available bandwith for real time VBR service."
::= { cwspLoadEntry 9 }
cwspLoadAvlBwNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available bandwith for non-real time VBR service."
::= { cwspLoadEntry 10 }
cwspLoadAvlBwAbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The available bandwith for ABR service."
::= { cwspLoadEntry 11 }
cwspLoadAvlBwUbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The available bandwith for UBR service."
::= { cwspLoadEntry 12 }
cwspLoadVcAvail OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of available VCs of the interface."
::= { cwspLoadEntry 13 }
cwspLoadAvlVcCbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of VCs used by CBR service."
::= { cwspLoadEntry 14 }
cwspLoadAvlVcRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VCs used by real time VBR service."
::= { cwspLoadEntry 15 }
cwspLoadAvlVcNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VCs used by non-real time VBR service."
::= { cwspLoadEntry 16 }
cwspLoadAvlVcAbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VCs used by ABR service."
::= { cwspLoadEntry 17 }
cwspLoadAvlVcUbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The number of VCs used by UBR service."
::= { cwspLoadEntry 18 }
cwspLoadCtdCbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell transfer delay of CBR service."
::= { cwspLoadEntry 19 }
cwspLoadCtdRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell transfer delay of real time VBR service."
::= { cwspLoadEntry 20 }
cwspLoadCtdNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell transfer delay of non-real time VBR service."
::= { cwspLoadEntry 21 }
cwspLoadCtdAbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell transfer delay of ABR service."
::= { cwspLoadEntry 22 }
cwspLoadCtdUbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell transfer delay of UBR service."
::= { cwspLoadEntry 23 }
cwspLoadCdvCbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell delay variation of CBR service."
::= { cwspLoadEntry 24 }
cwspLoadCdvRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell delay variation of real time VBR service."
::= { cwspLoadEntry 25 }
cwspLoadCdvNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell delay variation of non-real time VBR service."
::= { cwspLoadEntry 26 }
cwspLoadCdvAbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell delay variation of ABR service."
::= { cwspLoadEntry 27 }
cwspLoadCdvUbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell delay variation of UBR service."
::= { cwspLoadEntry 28 }
cwspLoadClr0Cbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell loss ratio-0 of CBR service, -1 implies N/A."
::= { cwspLoadEntry 29 }
cwspLoadClr0RtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell loss ratio-0 of real time VBR service, -1 implies
N/A."
::= { cwspLoadEntry 30 }
cwspLoadClr0NrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell loss ratio-0 of non-real time VBR service, -1
implies N/A."
::= { cwspLoadEntry 31 }
cwspLoadClr0Abr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell loss ratio-0 of ABR service, -1 implies N/A."
::= { cwspLoadEntry 32 }
cwspLoadClr0Ubr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell loss ratio-0 of UBR service, -1 implies N/A."
::= { cwspLoadEntry 33 }
cwspLoadClr01Cbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell loss ratio-1 of CBR service, -1 implies N/A."
::= { cwspLoadEntry 34 }
cwspLoadClr01RtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell loss ratio-1 of real time VBR service, -1 implies
N/A."
::= { cwspLoadEntry 35 }
cwspLoadClr01NrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell loss ratio-1 of non-real time VBR service, -1
implies N/A."
::= { cwspLoadEntry 36 }
cwspLoadClr01Abr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cell loss ratio-1 of ABR service, -1 implies N/A."
::= { cwspLoadEntry 37 }
cwspLoadClr01Ubr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The cell loss ratio-1 of UBR service, -1 implies N/A."
::= { cwspLoadEntry 38 }
cwspLoadMinGurCrCbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" The minimum guaranteed cell rate capacity of CBR
service."
::= { cwspLoadEntry 39 }
cwspLoadMinGurCrRtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum guaranteed cell rate capacity of real time VBR
service."
::= { cwspLoadEntry 40 }
cwspLoadMinGurCrNrtVbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum guaranteed cell rate capacity of non-real time
VBR service."
::= { cwspLoadEntry 41 }
cwspLoadMinGurCrAbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum guaranteed cell rate capacity of ABR
service."
::= { cwspLoadEntry 42 }
cwspLoadMinGurCrUbr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum guaranteed cell rate capacity of UBR
service."
::= { cwspLoadEntry 43 }
-- the port call table
cwspCallTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspCallEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Table contains the objects which show parameters
associated with a Point-to-Point(p2p) or Point-to-MultiPoint
(p2mp) SVC/SPVC call."
::= { cwspCall 1 }
cwspCallEntry OBJECT-TYPE
SYNTAX CwspCallEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object shows the multiple key index to get the Call
record information. The key comprise of Interface Index,
VPI/VCI value and Call Reference Value for the call."
INDEX { ifIndex, cwspCallVpi,
cwspCallVci, cwspCallLeafReference }
::= { cwspCallTable 1 }
CwspCallEntry ::= SEQUENCE {
cwspCallVpi Integer32,
cwspCallVci Integer32,
cwspCallLeafReference Integer32,
cwspCallCallRef Integer32,
cwspCallCallingAddress AtmAddress,
cwspCallCalledAddress AtmAddress,
cwspCallCallingSubAddr AtmAddress,
cwspCallCalledSubAddr AtmAddress,
cwspCallOtherIntfIndex Integer32,
cwspCallOtherIntfVpi Integer32,
cwspCallOtherIntfVci Integer32,
cwspCallOtherIntfCallRef Integer32,
cwspCallType INTEGER,
cwspCallStartTime TimeStamp,
cwspCallBearerClass INTEGER,
cwspCallServiceCategory INTEGER,
cwspCallCastType INTEGER,
cwspCallClipSusceptibility INTEGER,
cwspCallFwdConformance INTEGER,
cwspCallFwdPcr Integer32,
cwspCallFwdScr Integer32,
cwspCallFwdMbs Integer32,
cwspCallFwdCdvt Integer32,
cwspCallFwdFrameDiscard INTEGER,
cwspCallBwdConformance INTEGER,
cwspCallBwdPcr Integer32,
cwspCallBwdScr Integer32,
cwspCallBwdMbs Integer32,
cwspCallBwdCdvt Integer32,
cwspCallBwdFrameDiscard INTEGER,
cwspCallMaxCtd Integer32,
cwspCallMaxFwdCdv Integer32,
cwspCallMaxFwdClr Integer32,
cwspCallMaxBwdCdv Integer32,
cwspCallMaxBwdClr Integer32
}
cwspCallVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object shows the VPI value of the call on this
interface."
::= { cwspCallEntry 1 }
cwspCallVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object shows The VCI value of the call on this interface.
The value should be in the range of 32-65535 (0=SPVP)."
::= { cwspCallEntry 2 }
cwspCallLeafReference OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object shows the value of the Leaf Reference
(EndPointReference) of the Call on this interface."
::= { cwspCallEntry 3 }
cwspCallCallRef OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Call Reference value of the call on
this interface."
::= { cwspCallEntry 4 }
cwspCallCallingAddress OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Calling Party Address of the call."
::= { cwspCallEntry 5 }
cwspCallCalledAddress OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Called Party Address of the call."
::= { cwspCallEntry 6 }
cwspCallCallingSubAddr OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Calling Party Subaddress of the
call."
::= { cwspCallEntry 7 }
cwspCallCalledSubAddr OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Called Party Subaddress of the
call."
::= { cwspCallEntry 8 }
cwspCallOtherIntfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Other Interface of the call. Generally,
this would be the outgoing/egress interface for the call."
::= { cwspCallEntry 9 }
cwspCallOtherIntfVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the VPI of the call on the partner
interface."
::= { cwspCallEntry 10 }
cwspCallOtherIntfVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows The VCI of the call on the partner o
interface.
The value should be in the range of 32-65535 (0=SPVP)."
::= { cwspCallEntry 11 }
cwspCallOtherIntfCallRef OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Call Reference of the call on the
partner interface."
::= { cwspCallEntry 12 }
cwspCallType OBJECT-TYPE
SYNTAX INTEGER { svc(1), spvc(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Call Type for the call on this
interface.
The call type could be SVC or SPVC."
::= { cwspCallEntry 13 }
cwspCallStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the start time of the call. This is the
timestamp when the Setup Message (or Add Party Message) was
first received on this interface."
::= { cwspCallEntry 14 }
cwspCallBearerClass OBJECT-TYPE
SYNTAX INTEGER {
bcobA(1),
bcobC(2),
bcobX(3),
vp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Bearer Class of the Call. It could be
BcobA, BcobC, BcobX or VP Service"
::= { cwspCallEntry 15 }
cwspCallServiceCategory OBJECT-TYPE
SYNTAX INTEGER {
cbr(1),
rtVbr(2),
nrtVbr(3),
abr(4),
ubr(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the service category of the call, which can
be CBR, rtVBR, nrtVBR, ABR or UBR"
::= { cwspCallEntry 16 }
cwspCallCastType OBJECT-TYPE
SYNTAX INTEGER {
p2p(1),
p2mp(2),
mp2p(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Cast Type of the call, which can be a
Point-to-Point (p2p), Point-to-MultiPoint (p2mp) or
MultiPoint-to-Point (mp2p) call."
::= { cwspCallEntry 17 }
cwspCallClipSusceptibility OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows Susceptibility to Clipping. It can be
susceptible or not susceptible."
::= { cwspCallEntry 18 }
cwspCallFwdConformance OBJECT-TYPE
SYNTAX INTEGER {
cbr1(1),
cbr2(2),
cbr3(3),
vbr1(4),
vbr2(5),
vbr3(6),
abr(7),
ubr1(8),
ubr2(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the conformance of the call to the traffic
sets in the forward direction. It can be CBR.1, CBR.2, CBR.3,
VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in
ATMF Traffic Management 4.0 specification."
::= { cwspCallEntry 19 }
cwspCallFwdPcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Peak Cell Rate(pcr) in the forward
direction of the call."
::= { cwspCallEntry 20 }
cwspCallFwdScr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Sustainable Cell Rate(scr) in the
forward direction of the call."
::= { cwspCallEntry 21 }
cwspCallFwdMbs OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Maximum Burst Size(mbs) of the call
in the forward direction."
::= { cwspCallEntry 22 }
cwspCallFwdCdvt OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Cell Delay Variation Tolerance(cdvt)
in the forward direction for the call, for PCR and SCR."
::= { cwspCallEntry 23 }
cwspCallFwdFrameDiscard OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows if the Frame Discard is enabled or disabled
in the forward direction for the call"
::= { cwspCallEntry 24 }
cwspCallBwdConformance OBJECT-TYPE
SYNTAX INTEGER {
cbr1(1),
cbr2(2),
cbr3(3),
vbr1(4),
vbr2(5),
vbr3(6),
abr(7),
ubr1(8),
ubr2(9)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the conformance of the call to the traffic
sets in the backward direction. It can be CBR.1, CBR.2, CBR.3,
VBR.1 VBR.2, VBR.3, ABR, UBR.1 or UBR.2. This is as defined in
ATMF Traffic Management 4.0 specification."
::= { cwspCallEntry 25 }
cwspCallBwdPcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Peak Cell Rate in the backward direction
of the call."
::= { cwspCallEntry 26 }
cwspCallBwdScr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Sustainable Cell Rate in the backward
direction of the call."
::= { cwspCallEntry 27 }
cwspCallBwdMbs OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Maximum Burst Size of the call in the
backward direction."
::= { cwspCallEntry 28 }
cwspCallBwdCdvt OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Cell Delay Variation Tolerance in the
backward direction for the call, for PCR and SCR."
::= { cwspCallEntry 29 }
cwspCallBwdFrameDiscard OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows if the Frame Discard is enabled or disabled
in the backward direction for the call."
::= { cwspCallEntry 30 }
cwspCallMaxCtd OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Maximum Cell Transfer Delay for the call
on this interface."
::= { cwspCallEntry 31 }
cwspCallMaxFwdCdv OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Maximum Cell Delay Variation in the
forward direction for this call on this interface."
::= { cwspCallEntry 32 }
cwspCallMaxFwdClr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Maximum Cell Loss Ratio in the forward
direction for this call on this interface."
::= { cwspCallEntry 33 }
cwspCallMaxBwdCdv OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Maximum Cell Delay Variation in the
backward direction for this call on this interface."
::= { cwspCallEntry 34 }
cwspCallMaxBwdClr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Maximum Cell Loss Ratio in the backward
direction for this call on this interface."
::= { cwspCallEntry 35 }
-- the port ABR call table
cwspAbrCallTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspAbrCallEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information for ABR calls on an
interface."
::= { cwspAbrCall 1 }
cwspAbrCallEntry OBJECT-TYPE
SYNTAX CwspAbrCallEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the table, containing information about an ABR
call."
INDEX { ifIndex, cwspAbrCallVpi,
cwspAbrCallVci }
::= { cwspAbrCallTable 1 }
CwspAbrCallEntry ::= SEQUENCE {
cwspAbrCallVpi Integer32,
cwspAbrCallVci Integer32,
cwspAbrCallCallRef Integer32,
cwspAbrCallClgAddress AtmAddress,
cwspAbrCallCldAddress AtmAddress,
cwspAbrCallClgSubAddr AtmAddress,
cwspAbrCallCldSubAddr AtmAddress,
cwspAbrCallOtherIntfIndex Integer32,
cwspAbrCallOtherIntfVpi Integer32,
cwspAbrCallOtherIntfVci Integer32,
cwspAbrCallOtherIntfCallRef Integer32,
cwspAbrCallType INTEGER,
cwspAbrCallStartTime TimeStamp,
cwspAbrCallBearerClass INTEGER,
cwspAbrCallServiceCategory INTEGER,
cwspAbrCallCastType INTEGER,
cwspAbrCallClipSusceptibility INTEGER,
cwspAbrCallFwdConformance INTEGER,
cwspAbrCallFwdPcr Integer32,
cwspAbrCallFwdMcr Integer32,
cwspAbrCallFwdIcr Integer32,
cwspAbrCallFwdRif INTEGER,
cwspAbrCallFwdRdf INTEGER,
cwspAbrCallFwdTbe Integer32,
cwspAbrCallFwdNrm INTEGER,
cwspAbrCallFwdTrm INTEGER,
cwspAbrCallFwdAdtf Integer32,
cwspAbrCallFwdCdf INTEGER,
cwspAbrCallFwdFrameDiscard INTEGER,
cwspAbrCallBwdPcr Integer32,
cwspAbrCallBwdMcr Integer32,
cwspAbrCallBwdIcr Integer32,
cwspAbrCallBwdRif INTEGER,
cwspAbrCallBwdRdf INTEGER,
cwspAbrCallBwdTbe Integer32,
cwspAbrCallBwdNrm INTEGER,
cwspAbrCallBwdTrm INTEGER,
cwspAbrCallBwdAdtf Integer32,
cwspAbrCallBwdCdf INTEGER,
cwspAbrCallBwdFrameDiscard INTEGER,
cwspAbrCallFrtt Integer32,
cwspAbrCallMaxCtd Integer32,
cwspAbrCallMaxFwdCdv Integer32,
cwspAbrCallMaxFwdClr Integer32,
cwspAbrCallMaxBwdCdv Integer32,
cwspAbrCallMaxBwdClr Integer32
}
cwspAbrCallVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VPI value of the ABR call on this interface."
::= { cwspAbrCallEntry 1 }
cwspAbrCallVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The VCI value of the ABR call on this interface.
The value should be in the range of 32-65535 (0=SPVP)."
::= { cwspAbrCallEntry 2 }
cwspAbrCallCallRef OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Call Reference value of the ABR call on this interface."
::= { cwspAbrCallEntry 3 }
cwspAbrCallClgAddress OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Calling Party Address of the ABR call."
::= { cwspAbrCallEntry 4 }
cwspAbrCallCldAddress OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Called Party Address of the ABR call."
::= { cwspAbrCallEntry 5 }
cwspAbrCallClgSubAddr OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Calling Party Subaddress of the ABR call."
::= { cwspAbrCallEntry 6 }
cwspAbrCallCldSubAddr OBJECT-TYPE
SYNTAX AtmAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Called Party Subaddress of the ABR call."
::= { cwspAbrCallEntry 7 }
cwspAbrCallOtherIntfIndex OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Other Interface ID of the ABR call. Generally this
would be the outgoing/egress interface for the call."
::= { cwspAbrCallEntry 8 }
cwspAbrCallOtherIntfVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VPI value of the ABR call on the partner interface."
::= { cwspAbrCallEntry 9 }
cwspAbrCallOtherIntfVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The VCI value of the ABR call on the partner interface.
The value should be in the range of 32-65535 (0=SPVP)."
::= { cwspAbrCallEntry 10 }
cwspAbrCallOtherIntfCallRef OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Call Reference of the ABR call on the partner interface."
::= { cwspAbrCallEntry 11 }
cwspAbrCallType OBJECT-TYPE
SYNTAX INTEGER { svc(1), spvc(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Call Type for the ABR call on this interface. The call
type could be SVC or SPVC."
::= { cwspAbrCallEntry 12 }
cwspAbrCallStartTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of the ABR call. This is the timestamp when
the Setup Message (or Add Party Message) was first received
on this interface."
::= { cwspAbrCallEntry 13 }
cwspAbrCallBearerClass OBJECT-TYPE
SYNTAX INTEGER {
bcobA(1),
bcobC(2),
bcobX(3),
vp(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Bearer Class of the ABR call. It could be BCOB-A,
BCOB-C, BCOB-X or VP Service."
::= { cwspAbrCallEntry 14 }
cwspAbrCallServiceCategory OBJECT-TYPE
SYNTAX INTEGER { abr(4) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Service Category of the ABR call, which is ABR."
::= { cwspAbrCallEntry 15 }
cwspAbrCallCastType OBJECT-TYPE
SYNTAX INTEGER { p2p(1) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cast Type of the ABR call, which can only be
Point-to-Point(p2p) call."
::= { cwspAbrCallEntry 16 }
cwspAbrCallClipSusceptibility OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Susceptibility to Clipping. It can be susceptible or
not susceptible."
::= { cwspAbrCallEntry 17 }
cwspAbrCallFwdConformance OBJECT-TYPE
SYNTAX INTEGER { abr(7) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Conformance of the ABR call to the traffic sets in the
forward direction. It can only be ABR as defined in ATMF
Traffic Management 4.0 specification."
::= { cwspAbrCallEntry 18 }
cwspAbrCallFwdPcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Peak Cell Rate for the ABR call in the forward direction."
::= { cwspAbrCallEntry 19 }
cwspAbrCallFwdMcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum Cell Rate for the ABR call in the forward
direction."
::= { cwspAbrCallEntry 20 }
cwspAbrCallFwdIcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Initial Cell Rate for the ABR call in the forward
direction.
This is the rate at which the source starts, both initially
and after an idle period. The value must not be larger than
PCR, and is usually lower."
::= { cwspAbrCallEntry 21 }
cwspAbrCallFwdRif OBJECT-TYPE
SYNTAX INTEGER {
rifOneOver32768(1),
rifOneOver16384(2),
rifOneOver8192(3),
rifOneOver4096(4),
rifOneOver2048(5),
rifOneOver1024(6),
rifOneOver512(7),
rifOneOver256(8),
rifOneOver128(9),
rifOneOver64(10),
rifOneOver32(11),
rifOneOver16(12),
rifOneOver8(13),
rifOneOver4(14),
rifOneOver2(15),
rifOne(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rate Increase Factor for the ABR call in the forward
direction. This controls the rate at which the rate increases,
when a backward RM-cell is received with CI=0 and NI=0.
Larger values lead to faster rate increase. The default
value is rifOneOver16(12)."
::= { cwspAbrCallEntry 22 }
cwspAbrCallFwdRdf OBJECT-TYPE
SYNTAX INTEGER {
rdfOneOver32768(1),
rdfOneOver16384(2),
rdfOneOver8192(3),
rdfOneOver4096(4),
rdfOneOver2048(5),
rdfOneOver1024(6),
rdfOneOver512(7),
rdfOneOver256(8),
rdfOneOver128(9),
rdfOneOver64(10),
rdfOneOver32(11),
rdfOneOver16(12),
rdfOneOver8(13),
rdfOneOver4(14),
rdfOneOver2(15),
rdfOne(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rate Decrease Factor for the ABR call in the forward
direction. This controls the rate decrease which occurs
when backward RM-cells with CI=1, are received. Larger
values lead to faster rate decrease. The default value
is rdfOneOver16(12)."
::= { cwspAbrCallEntry 23 }
cwspAbrCallFwdTbe OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Transient Buffer Exposure for the ABR call in the forward
direction. This is the negotiated number of cells that the
network would like to limit the source to sending during
setup periods, before the first RM-cell returns."
::= { cwspAbrCallEntry 24 }
cwspAbrCallFwdNrm OBJECT-TYPE
SYNTAX INTEGER {
nrm2(1),
nrm4(2),
nrm8(3),
nrm16(4),
nrm32(5),
nrm64(6),
nrm128(7),
nrm256(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Number of Cells a source may send for each
forward RM-cell in the forward direction for the ABR call.
The default value is nrm32(5)."
::= { cwspAbrCallEntry 25 }
cwspAbrCallFwdTrm OBJECT-TYPE
SYNTAX INTEGER {
trm0point78125(1),
trm1point5625(2),
trm3point125(3),
trm6point25(4),
trm12point5(5),
trm25(6),
trm50(7),
trm100(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper Bound on the time between forward RM-cells in the
forward direction for the ABR call."
::= { cwspAbrCallEntry 26 }
cwspAbrCallFwdAdtf OBJECT-TYPE
SYNTAX Integer32 (1..1023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR
call in the forward direction. This is the time permitted
between sending RM-cells before the rate is decreased to ICR.
Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For
example, the default value of 50 corresponds to a time factor
of 500 ms. Larger values allow a source to retain its current
rate longer, during periods of relative inactivity. The
default is 50 (0.5 seconds)."
::= { cwspAbrCallEntry 27 }
cwspAbrCallFwdCdf OBJECT-TYPE
SYNTAX INTEGER {
cdf0(1),
cdfOneOver64(2),
cdfOneOver32(3),
cdfOneOver16(4),
cdfOneOver8(5),
cdfOneOver4(6),
cdfOneOver2(7),
cdfOne(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cutoff Decrease Factor for the ABR call in the forward
direction. This controls the decrease in Allowed Cell Rate
(ACR) associated with missing RM-cell count (CRM). Larger
values result in faster rate decrease. The default value
is cdfOneOver16(4)."
::= { cwspAbrCallEntry 28 }
cwspAbrCallFwdFrameDiscard OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether Frame Discard is enabled or disabled in the forward
direction for the ABR call."
::= { cwspAbrCallEntry 29 }
cwspAbrCallBwdPcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Peak Cell Rate for the ABR call in the backward
direction."
::= { cwspAbrCallEntry 30 }
cwspAbrCallBwdMcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Minimum Cell Rate for the ABR call in the backward
direction."
::= { cwspAbrCallEntry 31 }
cwspAbrCallBwdIcr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Initial Cell Rate for the ABR call in the backward
direction.
This is the rate at which the source starts, both initially
and after an idle period. The value must not be larger than
PCR, and is usually lower."
::= { cwspAbrCallEntry 32 }
cwspAbrCallBwdRif OBJECT-TYPE
SYNTAX INTEGER {
rifOneOver32768(1),
rifOneOver16384(2),
rifOneOver8192(3),
rifOneOver4096(4),
rifOneOver2048(5),
rifOneOver1024(6),
rifOneOver512(7),
rifOneOver256(8),
rifOneOver128(9),
rifOneOver64(10),
rifOneOver32(11),
rifOneOver16(12),
rifOneOver8(13),
rifOneOver4(14),
rifOneOver2(15),
rifOne(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rate Increase Factor for the ABR call in the backward
direction. This controls the rate at which the rate increases,
when a forward RM-cell is received with CI=0 and NI=0.
Larger values lead to faster rate increase. The default
value is rifOneOver16(12)."
::= { cwspAbrCallEntry 33 }
cwspAbrCallBwdRdf OBJECT-TYPE
SYNTAX INTEGER {
rdfOneOver32768(1),
rdfOneOver16384(2),
rdfOneOver8192(3),
rdfOneOver4096(4),
rdfOneOver2048(5),
rdfOneOver1024(6),
rdfOneOver512(7),
rdfOneOver256(8),
rdfOneOver128(9),
rdfOneOver64(10),
rdfOneOver32(11),
rdfOneOver16(12),
rdfOneOver8(13),
rdfOneOver4(14),
rdfOneOver2(15),
rdfOne(16)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Rate Decrease Factor for the ABR call in the backward
direction. This controls the rate decrease which occurs
when forward RM-cells with CI=1, are received. Larger
values lead to faster rate decrease. The default value
is rdfOneOver16(12)."
::= { cwspAbrCallEntry 34 }
cwspAbrCallBwdTbe OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Transient Buffer Exposure for the ABR call in the backward
direction. This is the negotiated number of cells that the
network would like to limit the source to sending during
setup periods, before the first RM-cell returns."
::= { cwspAbrCallEntry 35 }
cwspAbrCallBwdNrm OBJECT-TYPE
SYNTAX INTEGER {
nrm2(1),
nrm4(2),
nrm8(3),
nrm16(4),
nrm32(5),
nrm64(6),
nrm128(7),
nrm256(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Number of Cells a source may send for each forward
RM-cell in the backward direction for the ABR call. The default
value is nrm32(5)."
::= { cwspAbrCallEntry 36 }
cwspAbrCallBwdTrm OBJECT-TYPE
SYNTAX INTEGER {
trm0point78125(1),
trm1point5625(2),
trm3point125(3),
trm6point25(4),
trm12point5(5),
trm25(6),
trm50(7),
trm100(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Upper Bound on the time between forward RM-cells in the
backward direction for the ABR call."
::= { cwspAbrCallEntry 37 }
cwspAbrCallBwdAdtf OBJECT-TYPE
SYNTAX Integer32 (1..1023)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Allowed Cell Rate (ACR) Decrease Time Factor for the ABR
call in the backward direction. This is the time permitted
between sending RM-cells before the rate is decreased to ICR.
Range is 10 ms to 10.23 seconds. The unit is 10 msecs. For
example, the default value of 50 corresponds to a time factor
of 500 ms. Larger values allow a source to retain its current
rate longer, during periods of relative inactivity. The
default is 50 (0.5 seconds)."
::= { cwspAbrCallEntry 38 }
cwspAbrCallBwdCdf OBJECT-TYPE
SYNTAX INTEGER {
cdf0(1),
cdfOneOver64(2),
cdfOneOver32(3),
cdfOneOver16(4),
cdfOneOver8(5),
cdfOneOver4(6),
cdfOneOver2(7),
cdfOne(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Cutoff Decrease Factor for the ABR call in the backward
direction. This controls the decrease in Allowed Cell Rate
(ACR) associated with missing RM-cell count (CRM). Larger
values result in faster rate decrease. The default value
is cdfOneOver16(4)."
::= { cwspAbrCallEntry 39 }
cwspAbrCallBwdFrameDiscard OBJECT-TYPE
SYNTAX INTEGER { yes(1), no(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether Frame Discard is enabled or disabled in the backward
direction for the ABR call."
::= { cwspAbrCallEntry 40 }
cwspAbrCallFrtt OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Fixed Round-Trip Time for the ABR call. This is the sum
of the fixed and propagation delays from the source to the
furthest destination and back."
::= { cwspAbrCallEntry 41 }
cwspAbrCallMaxCtd OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Cell Transfer Delay for the ABR call on this
interface."
::= { cwspAbrCallEntry 42 }
cwspAbrCallMaxFwdCdv OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Cell Delay Variation in the forward direction
for the ABR call on this interface."
::= { cwspAbrCallEntry 43 }
cwspAbrCallMaxFwdClr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Cell Loss Ratio in the forward direction for
the ABR call on this interface."
::= { cwspAbrCallEntry 44 }
cwspAbrCallMaxBwdCdv OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Cell Delay Variation in the backward direction
for the ABR call on this interface."
::= { cwspAbrCallEntry 45 }
cwspAbrCallMaxBwdClr OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Maximum Cell Loss Ratio in the backward direction for
the ABR call on this interface."
::= { cwspAbrCallEntry 46 }
-- the following cswpConnTrace group is used to trace SVC
-- connection in the pnni network. The NMS can fire up the
-- action providing that the connection is active.
-- the port connection trace group
cwspConnTraceAvail OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object tells the number of calls can be traced
concurrently.
Depending on the system resource, this object may vary sometime
to time.
NMS should query this object to ensure there is system resource
available before creating a row in the cwspConnTraceCntlTable."
::= { cwspConnTrace 1 }
cwspConnTraceNextIndex OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When creating a row in the cwspConnTraceCntlTable, NMS should
query this object to obtain the index value to be used for row
creation."
::= { cwspConnTrace 2 }
-- the port connection trace control table
cwspConnTraceCntlTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspConnTraceCntlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This Table contains the objects which control the creation of
connection trace for the existing SVC call. "
::= { cwspConnTrace 3 }
cwspConnTraceCntlEntry OBJECT-TYPE
SYNTAX CwspConnTraceCntlEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object controls the connection trace creation.
NMS needs to acquire the next index available to create
a row. In addition, NMS needs to provide all read-create
objects in the same pdu with RowStatus to be CreateAndGo."
INDEX { cwspConnTraceIndex }
::= { cwspConnTraceCntlTable 1 }
CwspConnTraceCntlEntry ::= SEQUENCE {
cwspConnTraceIndex Integer32,
cwspConnTraceifIndex InterfaceIndex,
cwspConnTraceSrcVpi Integer32,
cwspConnTraceSrcVci Integer32,
cwspConnTraceType INTEGER,
cwspConnTraceCallRef Integer32,
cwspConnTraceLeafRef Integer32,
cwspConnTraceDestVpi Integer32,
cwspConnTraceDestVci Integer32,
cwspConnTraceDestCallRef Integer32,
cwspConnTraceResultStatus INTEGER,
cwspConnTraceQueryStatus RowStatus
}
cwspConnTraceIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index to a row of connection trace."
::= { cwspConnTraceCntlEntry 1 }
cwspConnTraceifIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The 'ifIndex' indicates the port to a trace connection."
::= { cwspConnTraceCntlEntry 2 }
cwspConnTraceSrcVpi OBJECT-TYPE
SYNTAX Integer32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object shows the VPI value of the starting point on
this interface."
::= { cwspConnTraceCntlEntry 3 }
cwspConnTraceSrcVci OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object shows The VCI value of the starting point on
this interface.
The value should be in the range of 32-65535 (0=SPVP)."
::= { cwspConnTraceCntlEntry 4 }
cwspConnTraceType OBJECT-TYPE
SYNTAX INTEGER { p2p(1), p2mp(2) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Setting this object to either p2p or p2mp to specify
tracing a p2p or p2mp connection."
::= { cwspConnTraceCntlEntry 5 }
cwspConnTraceCallRef OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Call Reference value of the call on
this interface."
::= { cwspConnTraceCntlEntry 6 }
cwspConnTraceLeafRef OBJECT-TYPE
SYNTAX Integer32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object shows the value of the Leaf Reference
(EndPointReference) of the Call on this interface,
this value is used to support p2mp call trace.
For p2p call, this value should be set as 0 by NMS."
::= { cwspConnTraceCntlEntry 7 }
cwspConnTraceDestVpi OBJECT-TYPE
SYNTAX Integer32(0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the endpoint VPI value of the call on
this interface."
::= { cwspConnTraceCntlEntry 8 }
cwspConnTraceDestVci OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the endpoint VCI value of the call on
this interface."
::= { cwspConnTraceCntlEntry 9 }
cwspConnTraceDestCallRef OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the endpoint call reference on
this interface."
::= { cwspConnTraceCntlEntry 10 }
cwspConnTraceResultStatus OBJECT-TYPE
SYNTAX INTEGER {
traceInProgress(1),
traceCompleted(2),
traceIncompleted(3),
traceExceededLength(4),
traceContRefused(5),
traceLackResource(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the result of tracing the call.
NMS should get positive result (i.e. traceCompleted) for
this attribute before query the cwspConnTraceTable."
::= { cwspConnTraceCntlEntry 11 }
cwspConnTraceQueryStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object used to manage rows in this table. However,
only CreateAndGo, NotInService, Active, and Destroy are
start up the trace. To remove a row, NMS set this value
to Destroy.
The managed device will either return Active or
NotInService."
::= { cwspConnTraceCntlEntry 12 }
-- the port connection data table
cwspConnTraceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspConnTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the objects which show the traversed
node information in the existing SVC call. "
::= { cwspConnTrace 4 }
cwspConnTraceEntry OBJECT-TYPE
SYNTAX CwspConnTraceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row of the cwspConnTraceTable used to return
information about all the nodes belongs to the connection
which search criteria is corresponding to instance of the
cwspConnTraceCntlTable. "
INDEX { cwspConnTraceIndex, cwspConnTraceDataIndex }
::= { cwspConnTraceTable 1 }
CwspConnTraceEntry ::= SEQUENCE {
cwspConnTraceDataIndex Integer32,
cwspConnTraceNodeId PnniNodeId,
cwspConnTraceEgressPortId PnniPortId,
cwspConnTraceEgressVpi Integer32,
cwspConnTraceEgressVci Integer32,
cwspConnTraceEgressCallRef Integer32,
cwspConnTraceEgressPhyPortId OCTET STRING,
cwspConnTraceLastNode TruthValue
}
cwspConnTraceDataIndex OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Along with cwspConnTraceIndex, this object specified an
unique entry in the cwspConnTraceTable."
::= { cwspConnTraceEntry 1 }
cwspConnTraceNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This octet string represents 22 bytes nodeId in the
traced connection."
::= { cwspConnTraceEntry 2 }
cwspConnTraceEgressPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents 4 bytes logical port ID of the
traversed node.
When 0 is specified, the destination node for the trace is
reached."
::= { cwspConnTraceEntry 3 }
cwspConnTraceEgressVpi OBJECT-TYPE
SYNTAX Integer32(0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Egress port's VPI value for the traced
connection."
::= { cwspConnTraceEntry 4 }
cwspConnTraceEgressVci OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Egress port's VCI value for the traced
connection"
::= { cwspConnTraceEntry 5 }
cwspConnTraceEgressCallRef OBJECT-TYPE
SYNTAX Integer32(0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Egress port's call reference."
::= { cwspConnTraceEntry 6 }
cwspConnTraceEgressPhyPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object shows the Egress port's physical port Identifier
for the traversed node; if this object is 0 meaning that the
destination node for the traced connection has been reached.
the meaning for the bytes are:
first byte -- flag (used by CLI to decode the rest of bytes )
2nd byte -- shelf
3rd & 4th bytes -- slot
5th byte -- subslot
6th & 7th bytes -- port
8th byte -- subport
"
::= { cwspConnTraceEntry 7 }
cwspConnTraceLastNode OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This value indicates if this entry contains the information
about the last node where this trace ends.
If it is the last node, this value is 'true(1)' or
it is 'false(2)'. "
::= { cwspConnTraceEntry 8 }
-- the PNNI routing group
-- This group is created for PNNI notifications (traps) to use
ciscoWANPnniLinkStatus OBJECT-TYPE
SYNTAX INTEGER {
in2win(1), -- in 2-Way Inside state
out2win(2), -- out of 2-Way Inside
in2wout(3), -- in 2-Way Outside state
out2wout(4), -- out of 2-Way Outside
inCout(5), -- in Common Outside state
outCout(6) } -- out of Common Outside
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of a link has changed:
1 - the link entered the 2-Way Inside state,
2 - the link exit the 2-Way Inside state,
3 - the link entered the 2-Way Outside state,
4 - the link exit the 2-Way Outside state.
5 - the link entered the Common Outside state, or
6 - the link exit the Common Outside state and entered
the 1-Way Outside state."
::= { ciscoWANPnniRouting 1 }
ciscoWANPnniPglStatus OBJECT-TYPE
SYNTAX INTEGER { ok(1), hung(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of PGL process has changed:
1 - the PGL exit the hung-election state, or
2 - the PGL entered the hung-election state."
::= { ciscoWANPnniRouting 2 }
ciscoWANPnniReachability OBJECT-TYPE
SYNTAX INTEGER { ok(1), fail(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used in conjunction with
ciscoWANPnniRemoteNodeId to indicate the
reachability of the RemoteNode has changed:
1 - RemoteNode became reachable, or
2 - RemoteNode became unreachable."
::= { ciscoWANPnniRouting 3 }
ciscoWANPnniRemoteNodeId OBJECT-TYPE
SYNTAX PnniNodeId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the node identifier of a remote node.
If the remote node ID is unknown, this attribute
is set to all zeros."
::= { ciscoWANPnniRouting 4 }
ciscoWANPnniPortId OBJECT-TYPE
SYNTAX PnniPortId
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier of the port."
::= { ciscoWANPnniRouting 5 }
-- the interface operation table
cwspOperationTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwspOperationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Interface operation table contains the runtime
negotiated values between platform, PNNI controller
and peer on an interface"
::= { cwspOperation 1 }
cwspOperationEntry OBJECT-TYPE
SYNTAX CwspOperationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the interface operation table containing
negotiated values of an interface"
INDEX { ifIndex }
::= { cwspOperationTable 1 }
CwspOperationEntry ::= SEQUENCE {
cwspOperIlmiEnable TruthValue,
cwspOperIfcType INTEGER,
cwspOperIfcSide INTEGER,
cwspOperMaxVPCs Integer32,
cwspOperMaxVCCs Integer32,
cwspOperMaxVpiBits Integer32,
cwspOperMaxVciBits Integer32,
cwspOperUniType INTEGER,
cwspOperUniVersion INTEGER,
cwspOperDeviceType INTEGER,
cwspOperIlmiVersion INTEGER,
cwspOperNniSigVersion INTEGER,
cwspOperMaxSvpcVpi Integer32,
cwspOperMinSvpcVpi Integer32,
cwspOperMaxSvccVpi Integer32,
cwspOperMinSvccVpi Integer32,
cwspOperMaxSvccVci Integer32,
cwspOperMinSvccVci Integer32,
cwspOperAddrPlanSupported INTEGER
}
cwspOperIlmiEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of ILMI."
::= { cwspOperationEntry 1 }
cwspOperIfcType OBJECT-TYPE
SYNTAX INTEGER {
publicUni(1),
privateUni(2),
iisp(3),
pnni(4),
aini(5),
enni(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The interface type of an interface
publicUni -- Public User-Network Interface
privateUni -- Private User-Network Interface
iisp -- Interim Inter-Switch Signaling Protocol
pnni -- Private Network-Network Interface
aini -- ATM Inter-Network Interface
enni -- Enhanced Network-Network Interface, a cisco
proprietary interfac type."
::= { cwspOperationEntry 2 }
cwspOperIfcSide OBJECT-TYPE
SYNTAX INTEGER {
userSide(1),
networkSide(2),
symmetric(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IME type of the ATM device which is concluded from
automatic interface type determination procedure."
REFERENCE
"ATM Forum ILMI 4.0 Section 8.3.4.1"
::= { cwspOperationEntry 3 }
cwspOperMaxVPCs OBJECT-TYPE
SYNTAX Integer32(0..4096)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of switched and permanent VPCs supported
on this ATM interface"
::= { cwspOperationEntry 4 }
cwspOperMaxVCCs OBJECT-TYPE
SYNTAX Integer32(0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of switched and permanent VCCs supported
on this ATM interface"
::= { cwspOperationEntry 5 }
cwspOperMaxVpiBits OBJECT-TYPE
SYNTAX Integer32(0..12)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active VPI bits on this ATM interface."
::= { cwspOperationEntry 6 }
cwspOperMaxVciBits OBJECT-TYPE
SYNTAX Integer32(0..16)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of active VCI bits on this ATM interface."
::= { cwspOperationEntry 7 }
cwspOperUniType OBJECT-TYPE
SYNTAX INTEGER {
public(1),
private(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of the ATM device, either public or private."
::= { cwspOperationEntry 8 }
cwspOperUniVersion OBJECT-TYPE
SYNTAX INTEGER {
version2point0(1),
version3poing0(2),
version3poing1(3),
version4poing0(4),
unsupported(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the latest version of the ATM Forum UNI
Signaling Specification that is supported on this ATM
Interface. If this value is not present, a version of the
UNI earlier than 3.1 is supported.
If the peer IME's value of this object is the same as,
or later than the local IME's value, then the version
corresponding to the local IME's value should be
attempted. Otherwise, if the peer IME's value of this
object is earlier, and supported locally, then the
local IME should attempt the version corresponding to
the peer IME's value. Otherwise, compatibility of the
two IMEs cannot be assumed."
::= { cwspOperationEntry 9 }
cwspOperDeviceType OBJECT-TYPE
SYNTAX INTEGER {
user(1),
node(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object determines the type of the ATM device. This
object is used in automatic ATM Interface-Type determination
procedure such that a correct operational ATM
Interface-type can be determined. An ATM End System
shall take the value of user(1), and an ATM network
node shall take the value of node(2)."
::= { cwspOperationEntry 10 }
cwspOperIlmiVersion OBJECT-TYPE
SYNTAX INTEGER {
unsupported(1),
version4point0(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the latest version of the ATM Forum
ILMI Specification that is supported on this ATM Interface.
If the peer IME's value of this object is the same as,
or later than the local IME's value, then the version
corresponding to the local IME's value should be
attempted. Otherwise, if the peer IME's value of this
object is earlier, and supported locally, then the
local IME should attempt the version corresponding to
the peer IME's value. Otherwise, compatibility of the
two IMEs cannot be assumed.
If this object is not present, a version of the ILMI earlier
than 4.0 is supported."
::= { cwspOperationEntry 11 }
cwspOperNniSigVersion OBJECT-TYPE
SYNTAX INTEGER {
unsupported(1),
iisp(2),
pnniVersion1point0(3),
enni(4),
aini(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An indication of the latest version of the ATM Forum
PNNI Signaling Specification that is supported on this
ATM Interface. Note that the PNNI routing version is not
determined through ILMI.
If the peer IME's value of this object is the same as,
or later than the local IME's value, then the version
corresponding to the local IME's value should be
attempted. Otherwise, if the peer IME's value of this
object is earlier, and supported locally, then the
local IME should attempt the version corresponding to
the peer IME's value. Otherwise, compatibility of the
two IMEs cannot be assumed.
Note that 'enni' is not a signaling protocol."
::= { cwspOperationEntry 12 }
cwspOperMaxSvpcVpi OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum switched VPC VPI."
::= { cwspOperationEntry 13 }
cwspOperMinSvpcVpi OBJECT-TYPE
SYNTAX Integer32(1..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum switched VPC VPI."
::= { cwspOperationEntry 14 }
cwspOperMaxSvccVpi OBJECT-TYPE
SYNTAX Integer32(0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum switched VCC VPI."
::= { cwspOperationEntry 15 }
cwspOperMinSvccVpi OBJECT-TYPE
SYNTAX Integer32(0..4095)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum switched VCC VPI."
::= { cwspOperationEntry 16 }
cwspOperMaxSvccVci OBJECT-TYPE
SYNTAX Integer32(35..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum switched VCC VCI."
::= { cwspOperationEntry 17 }
cwspOperMinSvccVci OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum switched VCC VCI."
::= { cwspOperationEntry 18 }
cwspOperAddrPlanSupported OBJECT-TYPE
SYNTAX INTEGER {
both(1),
aesa(2),
e164(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ATM address plan supported on a public UNI. For all other
interfaces, the value is aesa."
::= { cwspOperationEntry 19 }
-- cwspOperFailReason is used in Notifications
cwspOperFailReason OBJECT-TYPE
SYNTAX INTEGER {
ilmiDown(1),
portDown(2),
vsiOperDown(3),
vccfailure(4),
neighIpChanged(5),
vsiRemove(6),
vsiAdminDown(7)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defined SVC port failures.
Note: this object is used as trap varbind only.
The NMS applications should not issue SNMP get,
get-next for this object."
::= { cwspOperation 2 }
ciscoWANSpvcFailReason OBJECT-TYPE
SYNTAX CwspSpvcState
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Defines SPVC manager failures. Refer description
in the textual convention.
Note: this object is for Supporting Varbinds used only
in trap definitions. The NMS applications should not
depend on the implementation of this object. The
SNMP Requests(GET,GET-NEXT) is not valid for
this object."
::= { ciscoWANSpvc 1 }
-- scalar object for spvc.
cwspSpvcNodePrefix OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(13))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Spvc node prefix for the pnni controller. This
node prefix identifies an SPVC node in the network."
::= { ciscoWANSpvc 2 }
-- Conformance
ciscoWANSvcMIBConformance OBJECT IDENTIFIER
::= { ciscoWANSvcMIB 3 }
ciscoWANSvcMIBCompliances OBJECT IDENTIFIER
::= { ciscoWANSvcMIBConformance 1 }
ciscoWANSvcMIBGroups OBJECT IDENTIFIER
::= { ciscoWANSvcMIBConformance 2 }
-- Compliance
ciscoWANSvcMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- replaced by ciscoWANSvcMIBCompliance2
DESCRIPTION
"The compliance statement for entities that support
the Cisco SVC MIB.
"
MODULE -- compliance to this module
MANDATORY-GROUPS {
cwsInfoGrp,
cwspConfigGrp,
cwspCacConfigGrp,
cwspCallStatsGrp,
cwspSigStatsGrp,
cwspCallGrp,
cwspAbrCallGrp,
cwspPrefixGrp,
cwspLoadGrp,
cwspAddressGrp,
cwspConnTraceGrp,
cwspOperationGrp
}
GROUP cwspSigConfigGrp
DESCRIPTION
"The signaling config group is optional."
GROUP cwspSscopConfigGrp
DESCRIPTION
"The sscop config group is optional."
GROUP cwspSscopStatsGrp
DESCRIPTION
"The sscop stat group is optional."
GROUP cwspRegAddressGrp
DESCRIPTION
"The registered atm address group is optional."
GROUP cwspRoutingGrp
DESCRIPTION
"The PNNI routing group is optional."
GROUP cwspSpvcGrp
DESCRIPTION
"The Spvc group is optional."
OBJECT cwspSpvcNodePrefix
MIN-ACCESS read-only
DESCRIPTION
"Write Access is not permitted now until future
release."
OBJECT cwspMaxP2pCalls
MIN-ACCESS read-only
DESCRIPTION
"Write Access is not permitted now until future
release."
::= { ciscoWANSvcMIBCompliances 1 }
ciscoWANSvcMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated -- replaced by ciscoWANSvcMIBCompliance3
DESCRIPTION
"The compliance statement for entities that support
the Cisco SVC MIB.
"
MODULE -- compliance to this module
MANDATORY-GROUPS {
cwsInfoGrp,
cwspConfigGrp,
cwspCacConfigGrp,
cwspCallStatsGrp,
cwspSigStatsGrp,
cwspCallGrp,
cwspAbrCallGrp,
cwspPrefixGrp,
cwspLoadGrp,
cwspAddressGrp,
cwspConnTraceGrp2,
cwspOperationGrp
}
GROUP cwspSigConfigGrp
DESCRIPTION
"The signaling config group is optional."
GROUP cwspSscopConfigGrp
DESCRIPTION
"The sscop config group is optional."
GROUP cwspSscopStatsGrp
DESCRIPTION
"The sscop stat group is optional."
GROUP cwspRegAddressGrp
DESCRIPTION
"The registered atm address group is optional."
GROUP cwspRoutingGrp
DESCRIPTION
"The PNNI routing group is optional."
GROUP cwspSpvcGrp
DESCRIPTION
"The Spvc group is optional."
OBJECT cwspSpvcNodePrefix
MIN-ACCESS read-only
DESCRIPTION
"Write Access is not permitted now until future
release."
OBJECT cwspMaxP2pCalls
MIN-ACCESS read-only
DESCRIPTION
"Write Access is not permitted now until future
release."
::= { ciscoWANSvcMIBCompliances 2 }
ciscoWANSvcMIBCompliance3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that support
the Cisco SVC MIB.
"
MODULE -- compliance to this module
MANDATORY-GROUPS {
cwsInfoGrp,
cwspConfigGrp3,
cwspCacConfigGrp,
cwspCallStatsGrp,
cwspSigStatsGrp,
cwspCallGrp,
cwspAbrCallGrp,
cwspPrefixGrp,
cwspLoadGrp,
cwspAddressGrp,
cwspConnTraceGrp2,
cwspOperationGrp
}
GROUP cwspSigConfigGrp
DESCRIPTION
"The signaling config group is optional."
GROUP cwspSscopConfigGrp
DESCRIPTION
"The sscop config group is optional."
GROUP cwspSscopStatsGrp
DESCRIPTION
"The sscop stat group is optional."
GROUP cwspRegAddressGrp
DESCRIPTION
"The registered atm address group is optional."
GROUP cwspRoutingGrp
DESCRIPTION
"The PNNI routing group is optional."
GROUP cwspSpvcGrp
DESCRIPTION
"The Spvc group is optional."
OBJECT cwspSpvcNodePrefix
MIN-ACCESS read-only
DESCRIPTION
"Write Access is not permitted now until future release"
OBJECT cwspMaxP2pCalls
MIN-ACCESS read-only
DESCRIPTION
"Write Access is not permitted now until future release"
::= { ciscoWANSvcMIBCompliances 3 }
-- Units of Conformance
cwsInfoGrp OBJECT-GROUP
OBJECTS {
cwsSwRevision,
cwsControllerStatus,
cwspPnniStndbyControllerStatus,
cwspPnniControllerStatus,
cwspPnniControllerPhySlot
}
STATUS current
DESCRIPTION
"A collection of objects providing device level information."
::= { ciscoWANSvcMIBGroups 1 }
cwspConfigGrp OBJECT-GROUP
OBJECTS {
cwspAdminStatus,
cwspOperStatus,
cwspSvcBlocked,
cwspSpvcBlocked,
cwspIlmiAddrRegEnable,
cwspIlmiAutoConfEnable,
cwspIlmiServRegEnable,
cwspPhyIdentifier,
cwspSignallingVpi,
cwspSignallingVci,
cwspRoutingVpi,
cwspRoutingVci,
cwspMaxVpiBits,
cwspMaxVciBits,
cwspUniVersion,
cwspNniVersion,
cwspUniType,
cwspSide,
cwspMaxP2pCalls,
cwspMaxP2mpRoots,
cwspMaxP2mpLeafs,
cwspMinSvccVpi,
cwspMaxSvccVpi,
cwspMinSvccVci,
cwspMaxSvccVci,
cwspMinSvpcVpi,
cwspMaxSvpcVpi,
cwspEnhancedIisp,
cwspConfigTableRowStatus,
cwspAddrPlanSupported
}
STATUS deprecated -- replace by cwspConfigGrp2
DESCRIPTION
"A collection of objects providing information about
the controller interface operation and associated
parameters."
::= { ciscoWANSvcMIBGroups 2 }
cwspCacConfigGrp OBJECT-GROUP
OBJECTS {
cwspUtilFactorCbr,
cwspUtilFactorRtVbr,
cwspUtilFactorNrtVbr,
cwspUtilFactorAbr,
cwspUtilFactorUbr,
cwspMaxBwCbr,
cwspMaxBwRtVbr,
cwspMaxBwNrtVbr,
cwspMaxBwAbr,
cwspMaxBwUbr,
cwspMinBwCbr,
cwspMinBwRtVbr,
cwspMinBwNrtVbr,
cwspMinBwAbr,
cwspMinBwUbr,
cwspMaxVcCbr,
cwspMaxVcRtVbr,
cwspMaxVcNrtVbr,
cwspMaxVcAbr,
cwspMaxVcUbr,
cwspMinVcCbr,
cwspMinVcRtVbr,
cwspMinVcNrtVbr,
cwspMinVcAbr,
cwspMinVcUbr,
cwspMaxVcBwCbr,
cwspMaxVcBwRtVbr,
cwspMaxVcBwNrtVbr,
cwspMaxVcBwAbr,
cwspMaxVcBwUbr,
cwspDefaultCdvtCbr,
cwspDefaultCdvtRtVbr,
cwspDefaultCdvtNrtVbr,
cwspDefaultCdvtAbr,
cwspDefaultCdvtUbr,
cwspDefaultMbsRtVbr,
cwspDefaultMbsNrtVbr
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
CAC information of a interface."
::= { ciscoWANSvcMIBGroups 3 }
cwspCallStatsGrp OBJECT-GROUP
OBJECTS {
cwspCountReset,
cwspInCallAttempts,
cwspInCallEstabs,
cwspInCallFailures,
cwspInFilterFailures,
cwspInRouteFailures,
cwspInResrcFailures,
cwspInTimerFailures,
cwspInCrankbacks,
cwspOutCallAttempts,
cwspOutCallEstabs,
cwspOutCallFailures,
cwspOutFilterFailures,
cwspOutRouteFailures,
cwspOutResrcFailures,
cwspOutTimerFailures,
cwspOutCrankbacks
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
call statistics of a interface."
::= { ciscoWANSvcMIBGroups 4 }
cwspSigStatsGrp OBJECT-GROUP
OBJECTS {
cwspSigCounterReset,
cwspCallProcRcv,
cwspConnectRcv,
cwspConnectAckRcv,
cwspSetupRcv,
cwspReleaseRcv,
cwspReleaseComplRcv,
cwspRestartRcv,
cwspRestartAckRcv,
cwspStatusRcv,
cwspStatusEnqRcv,
cwspNotifyRcv,
cwspAlertRcv,
cwspProgressRcv,
cwspAddPtyRcv,
cwspAddPtyAckRcv,
cwspAddPtyRejRcv,
cwspDropPtyRcv,
cwspIncorrectMsgRcv,
cwspTimerExpiries,
cwspLastCause,
cwspLastDiagnostic,
cwspCallProcXmt,
cwspConnectXmt,
cwspConnectAckXmt,
cwspSetupXmt,
cwspReleaseXmt,
cwspReleaseComplXmt,
cwspRestartXmt,
cwspRestartAckXmt,
cwspStatusXmt,
cwspStatusEnqXmt,
cwspNotifyXmt,
cwspAlertXmt,
cwspProgressXmt,
cwspAddPtyXmt,
cwspAddPtyAckXmt,
cwspAddPtyRejXmt,
cwspDropPtyXmt,
cwspSscopStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
signaling statistics."
::= { ciscoWANSvcMIBGroups 5 }
cwspCallGrp OBJECT-GROUP
OBJECTS {
cwspCallCallRef,
cwspCallCallingAddress,
cwspCallCalledAddress,
cwspCallCallingSubAddr,
cwspCallCalledSubAddr,
cwspCallOtherIntfIndex,
cwspCallOtherIntfVpi,
cwspCallOtherIntfVci,
cwspCallOtherIntfCallRef,
cwspCallType,
cwspCallStartTime,
cwspCallBearerClass,
cwspCallServiceCategory,
cwspCallCastType,
cwspCallClipSusceptibility,
cwspCallFwdConformance,
cwspCallFwdPcr,
cwspCallFwdScr,
cwspCallFwdMbs,
cwspCallFwdCdvt,
cwspCallFwdFrameDiscard,
cwspCallBwdConformance,
cwspCallBwdPcr,
cwspCallBwdScr,
cwspCallBwdMbs,
cwspCallBwdCdvt,
cwspCallBwdFrameDiscard,
cwspCallMaxCtd,
cwspCallMaxFwdCdv,
cwspCallMaxFwdClr,
cwspCallMaxBwdCdv,
cwspCallMaxBwdClr
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
the p2p or p2mp SVC/SPVC calls and associated parameters."
::= { ciscoWANSvcMIBGroups 6 }
cwspAbrCallGrp OBJECT-GROUP
OBJECTS {
cwspAbrCallCallRef,
cwspAbrCallClgAddress,
cwspAbrCallCldAddress,
cwspAbrCallClgSubAddr,
cwspAbrCallCldSubAddr,
cwspAbrCallOtherIntfIndex,
cwspAbrCallOtherIntfVpi,
cwspAbrCallOtherIntfVci,
cwspAbrCallOtherIntfCallRef,
cwspAbrCallType,
cwspAbrCallStartTime,
cwspAbrCallBearerClass,
cwspAbrCallServiceCategory,
cwspAbrCallCastType,
cwspAbrCallClipSusceptibility,
cwspAbrCallFwdConformance,
cwspAbrCallFwdPcr,
cwspAbrCallFwdMcr,
cwspAbrCallFwdIcr,
cwspAbrCallFwdRif,
cwspAbrCallFwdRdf,
cwspAbrCallFwdTbe,
cwspAbrCallFwdNrm,
cwspAbrCallFwdTrm,
cwspAbrCallFwdAdtf,
cwspAbrCallFwdCdf,
cwspAbrCallFwdFrameDiscard,
cwspAbrCallBwdPcr,
cwspAbrCallBwdMcr,
cwspAbrCallBwdIcr,
cwspAbrCallBwdRif,
cwspAbrCallBwdRdf,
cwspAbrCallBwdTbe,
cwspAbrCallBwdNrm,
cwspAbrCallBwdTrm,
cwspAbrCallBwdAdtf,
cwspAbrCallBwdCdf,
cwspAbrCallBwdFrameDiscard,
cwspAbrCallFrtt,
cwspAbrCallMaxCtd,
cwspAbrCallMaxFwdCdv,
cwspAbrCallMaxFwdClr,
cwspAbrCallMaxBwdCdv,
cwspAbrCallMaxBwdClr
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
ABR calls and associated parameters of a interface."
::= { ciscoWANSvcMIBGroups 7 }
cwspPrefixGrp OBJECT-GROUP
OBJECTS {
cwspPrefixRowStatus
}
STATUS current
DESCRIPTION
"A table specifying the network prefix(es)
used for ILMI address registration."
::= { ciscoWANSvcMIBGroups 8 }
cwspLoadGrp OBJECT-GROUP
OBJECTS {
cwspLoadBwTotal,
cwspLoadMaxBwCbr,
cwspLoadMaxBwRtVbr,
cwspLoadMaxBwNrtVbr,
cwspLoadMaxBwAbr,
cwspLoadMaxBwUbr,
cwspLoadBwAvail,
cwspLoadAvlBwCbr,
cwspLoadAvlBwRtVbr,
cwspLoadAvlBwNrtVbr,
cwspLoadAvlBwAbr,
cwspLoadAvlBwUbr,
cwspLoadVcAvail,
cwspLoadAvlVcCbr,
cwspLoadAvlVcRtVbr,
cwspLoadAvlVcNrtVbr,
cwspLoadAvlVcAbr,
cwspLoadAvlVcUbr,
cwspLoadCtdCbr,
cwspLoadCtdRtVbr,
cwspLoadCtdNrtVbr,
cwspLoadCtdAbr,
cwspLoadCtdUbr,
cwspLoadCdvCbr,
cwspLoadCdvRtVbr,
cwspLoadCdvNrtVbr,
cwspLoadCdvAbr,
cwspLoadCdvUbr,
cwspLoadClr0Cbr,
cwspLoadClr0RtVbr,
cwspLoadClr0NrtVbr,
cwspLoadClr0Abr,
cwspLoadClr0Ubr,
cwspLoadClr01Cbr,
cwspLoadClr01RtVbr,
cwspLoadClr01NrtVbr,
cwspLoadClr01Abr,
cwspLoadClr01Ubr,
cwspLoadMinGurCrCbr,
cwspLoadMinGurCrRtVbr,
cwspLoadMinGurCrNrtVbr,
cwspLoadMinGurCrAbr,
cwspLoadMinGurCrUbr
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
load information and associated parameters of a interface."
::= { ciscoWANSvcMIBGroups 9 }
cwspAddressGrp OBJECT-GROUP
OBJECTS {
cwspAddrType,
cwspAddrProto,
cwspAddrPlan,
cwspAddrScope,
cwspAddrRedistribute,
cwspAddressRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
ATM End System Addresses."
::= { ciscoWANSvcMIBGroups 10 }
cwspSigConfigGrp OBJECT-GROUP
OBJECTS {
cwspSigCfgT301,
cwspSigCfgT303,
cwspSigCfgT308,
cwspSigCfgT310,
cwspSigCfgT316,
cwspSigCfgT317,
cwspSigCfgT322,
cwspSigCfgT397,
cwspSigCfgT398,
cwspSigCfgT399
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
signaling configuration and associated parameters."
::= { ciscoWANSvcMIBGroups 11 }
cwspSscopConfigGrp OBJECT-GROUP
OBJECTS {
cwspSscopTmrCC,
cwspSscopTmrKeepAlive,
cwspSscopTmrNoResp,
cwspSscopTmrPoll,
cwspSscopTmtIdle,
cwspSscopMaxCC,
cwspSscopMaxPD,
cwspSscopMaxSTAT
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
SSCOP configuration and associated parameters."
::= { ciscoWANSvcMIBGroups 12 }
cwspSscopStatsGrp OBJECT-GROUP
OBJECTS {
cwspSscopCounterReset,
cwspSscopIgnoredPduRcv,
cwspSscopBgnRcv,
cwspSscopBgakRcv,
cwspSscopEndRcv,
cwspSscopEndakRcv,
cwspSscopRsRcv,
cwspSscopRsakRcv,
cwspSscopBgrejRcv,
cwspSscopSdRcv,
cwspSscopSdpRcv,
cwspSscopPollRcv,
cwspSscopStatRcv,
cwspSscopUstatRcv,
cwspSscopUdRcv,
cwspSscopMdRcv,
cwspSscopErakRcv,
cwspSscopBgnXmt,
cwspSscopBgakXmt,
cwspSscopEndXmt,
cwspSscopEndakXmt,
cwspSscopRsXmt,
cwspSscopRsakXmt,
cwspSscopBgrejXmt,
cwspSscopSdXmt,
cwspSscopSdpXmt,
cwspSscopPollXmt,
cwspSscopStatXmt,
cwspSscopUstatXmt,
cwspSscopUdXmt,
cwspSscopMdXmt,
cwspSscopErakXmt
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
SSCOP statistics."
::= { ciscoWANSvcMIBGroups 13 }
cwspRegAddressGrp OBJECT-GROUP
OBJECTS {
cwspRegAtmAddress,
cwspRegAddressOrgSscope
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
registed ATM address."
::= { ciscoWANSvcMIBGroups 14 }
cwspRoutingGrp OBJECT-GROUP
OBJECTS {
ciscoWANPnniLinkStatus,
ciscoWANPnniPglStatus,
ciscoWANPnniReachability,
ciscoWANPnniRemoteNodeId,
ciscoWANPnniPortId
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
PNNI topology."
::= { ciscoWANSvcMIBGroups 15 }
cwspConnTraceGrp OBJECT-GROUP
OBJECTS {
cwspConnTraceAvail,
cwspConnTraceNextIndex,
cwspConnTraceifIndex,
cwspConnTraceSrcVpi,
cwspConnTraceSrcVci,
cwspConnTraceType,
cwspConnTraceCallRef,
cwspConnTraceLeafRef,
cwspConnTraceDestVpi,
cwspConnTraceDestVci,
cwspConnTraceDestCallRef,
cwspConnTraceResultStatus,
cwspConnTraceQueryStatus,
cwspConnTraceNodeId,
cwspConnTraceEgressPortId,
cwspConnTraceEgressVpi,
cwspConnTraceEgressVci,
cwspConnTraceEgressCallRef,
cwspConnTraceEgressPhyPortId
}
STATUS deprecated -- replaced by cwspConnTraceGrp2
DESCRIPTION
"A collection of objects providing trace information about
SVC/PNNI connnection."
::= { ciscoWANSvcMIBGroups 16 }
cwspOperationGrp OBJECT-GROUP
OBJECTS {
cwspOperIlmiEnable,
cwspOperIfcType,
cwspOperIfcSide,
cwspOperMaxVPCs,
cwspOperMaxVCCs,
cwspOperMaxVpiBits,
cwspOperMaxVciBits,
cwspOperUniType,
cwspOperUniVersion,
cwspOperDeviceType,
cwspOperIlmiVersion,
cwspOperNniSigVersion,
cwspOperMaxSvpcVpi,
cwspOperMinSvpcVpi,
cwspOperMaxSvccVpi,
cwspOperMinSvccVpi,
cwspOperMaxSvccVci,
cwspOperMinSvccVci,
cwspOperFailReason,
cwspOperAddrPlanSupported,
cwspIlmiSecureLink,
cwspIlmiAttachmentPoint,
cwspIlmiLocalAttrStd,
cwspIlmiUCSMEnable
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
runtime negotiated values between platform, PNNI
controller and peer on an interface."
::= { ciscoWANSvcMIBGroups 17 }
cwspSpvcGrp OBJECT-GROUP
OBJECTS {
ciscoWANSpvcFailReason,
cwspSpvcNodePrefix
}
STATUS current
DESCRIPTION
"A collection of objects providing spvc related
information in pnni controller."
::= { ciscoWANSvcMIBGroups 18 }
cwspConnTraceGrp2 OBJECT-GROUP
OBJECTS {
cwspConnTraceAvail,
cwspConnTraceNextIndex,
cwspConnTraceifIndex,
cwspConnTraceSrcVpi,
cwspConnTraceSrcVci,
cwspConnTraceType,
cwspConnTraceCallRef,
cwspConnTraceLeafRef,
cwspConnTraceDestVpi,
cwspConnTraceDestVci,
cwspConnTraceDestCallRef,
cwspConnTraceResultStatus,
cwspConnTraceQueryStatus,
cwspConnTraceNodeId,
cwspConnTraceEgressPortId,
cwspConnTraceEgressVpi,
cwspConnTraceEgressVci,
cwspConnTraceEgressCallRef,
cwspConnTraceEgressPhyPortId,
cwspConnTraceLastNode
}
STATUS current
DESCRIPTION
"A collection of objects providing trace information about
SVC/PNNI connnection."
::= { ciscoWANSvcMIBGroups 19 }
cwspConfigGrp2 OBJECT-GROUP
OBJECTS {
cwspAdminStatus,
cwspOperStatus,
cwspSvcBlocked,
cwspSpvcBlocked,
cwspIlmiAddrRegEnable,
cwspIlmiAutoConfEnable,
cwspIlmiServRegEnable,
cwspPhyIdentifier,
cwspSignallingVpi,
cwspSignallingVci,
cwspRoutingVpi,
cwspRoutingVci,
cwspMaxVpiBits,
cwspMaxVciBits,
cwspUniVersion,
cwspNniVersion,
cwspUniType,
cwspSide,
cwspMaxP2pCalls,
cwspMaxP2mpRoots,
cwspMaxP2mpLeafs,
cwspMinSvccVpi,
cwspMaxSvccVpi,
cwspMinSvccVci,
cwspMaxSvccVci,
cwspMinSvpcVpi,
cwspMaxSvpcVpi,
cwspEnhancedIisp,
cwspConfigTableRowStatus,
cwspAddrPlanSupported,
cwspIlmiSecureLink,
cwspIlmiAttachmentPoint,
cwspIlmiLocalAttrStd,
cwspIlmiUCSMEnable,
cwspRoutingPriority
}
STATUS deprecated -- replaced by cwspConfigGrp3
DESCRIPTION
"A collection of objects providing information about
the controller interface operation and associated parameters."
::= { ciscoWANSvcMIBGroups 20 }
cwspConfigGrp3 OBJECT-GROUP
OBJECTS {
cwspAdminStatus,
cwspOperStatus,
cwspSvcBlocked,
cwspSpvcBlocked,
cwspIlmiAddrRegEnable,
cwspIlmiAutoConfEnable,
cwspIlmiServRegEnable,
cwspPhyIdentifier,
cwspSignallingVpi,
cwspSignallingVci,
cwspRoutingVpi,
cwspRoutingVci,
cwspMaxVpiBits,
cwspMaxVciBits,
cwspUniVersion,
cwspNniVersion,
cwspUniType,
cwspSide,
cwspMaxP2pCalls,
cwspMaxP2mpRoots,
cwspMaxP2mpLeafs,
cwspMinSvccVpi,
cwspMaxSvccVpi,
cwspMinSvccVci,
cwspMaxSvccVci,
cwspMinSvpcVpi,
cwspMaxSvpcVpi,
cwspEnhancedIisp,
cwspConfigTableRowStatus,
cwspAddrPlanSupported,
cwspIlmiSecureLink,
cwspIlmiAttachmentPoint,
cwspIlmiLocalAttrStd,
cwspIlmiUCSMEnable,
cwspRoutingPriority,
cwspSpvcAddress
}
STATUS current
DESCRIPTION
"A collection of objects providing information about
the controller interface operation and associated parameters."
::= { ciscoWANSvcMIBGroups 21 }
END
Reference in New Issue View Git Blame Copy Permalink