MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-RSRC-PART-MIB.my 2
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

852 lines
30 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ciscoWANRsrcPart MIB
--
-- March, 2002
--
-- Copyright (c) 1999 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-WAN-RSRC-PART-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
Integer32 FROM SNMPv2-SMI
TruthValue,
RowStatus FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB
ciscoMgmt FROM CISCO-SMI;
ciscoWANRsrcPartMIB MODULE-IDENTITY
LAST-UPDATED "200209140000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module to manage resource partition objects. A resource
partition is configured on a virtual interface (ifType value
atmVirtual(149)) or atm interface (ifType value atm(37)).
An administrator can partition connection related resources like
VPI, VCI ranges, bandwidth and total amount of available connection
entries in the switch through these MIB tables.
Terminolgies used:
VSI - Virtual Switch Interface, a hardware-independent switch
control protocol. This allows a Switch to be
controlled by a multiple controllers such as PNNI, MPLS.
These control planes can be internal or external to the
switch.The VSI interface defines the messages and associated
functions which allow communication between the controller
and the switch.This interface is expected to support all
types of connections (voice,data,frame relay,ATM) for PVCs,
SPVCs and SVCs.
VSI Master - software component which requests connections and
receives switch generic information. This controls one or
more VSI Slaves. This may run on the switch or a dedicated
controller platform. This is the master module.It performs
the interface to the higher layer networking software and
handles all VSI related functions.
Controller - Software ( and possibly hardware) which manages
topology and network resources and performs VSI Master
function. This performs source routing for end-to-end SVCs,
including general call acceptance GCAC,setup calls with other
controllers.
PNNI and MPLS are examples of controllers.
ILMI - Integrated Local Management Interface (ILMI). An ATM
Forum defined, SNMP-based management protocol for an ATM UNI.
It provides interface status and configuration information,
and also supports dynamic ATM address registration.
CAC - Call Admission Control (CAC). When a new call coming to the
gateway, a process checks the availability of the resources
involved in the connection establishment before the gateway
sets up the call.
ATM - Asynchronous Transfer Mode (ATM).
PNNI - Private Network to Network Interface (PNNI).
MPLS - MultiProtocol Label Switching (MPLS).
GCAC - Generic Connection Admittance Control (GCAC).
PVC - Permanent Virtual Circuits (PVC).
SVC - Switched Virtual Circuits (SVC).
SPVC - Soft Permanent Virtual Circuits (SPVC).
VPI - Virtual Path Identifier (VPI).
VCI - Virtual Circuit Identifier (VCI).
"
REVISION "200209140000Z"
DESCRIPTION
"Added the cwRsrcSvcAggrTable to manage SVC aggregate
resources.
Added the cwRsrcPartMIBComplianceRev1 which supersedes the
cwRsrcPartMIBCompliance after the group cwRsrcSvcAggrGroup
was added."
REVISION "200203060000Z"
DESCRIPTION
"Made following changes:
(1) Changed cwRsrcPartSignallingVpi range to be consistent with
values defined in standard document.
(2) Changed cwRsrcPartIlmiTable description."
REVISION "9910120000Z"
DESCRIPTION
"Initial version of the MIB."
::= {ciscoMgmt 125 }
ciscoWANRsrcPartMIBObjects OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIB 1}
cwRsrcPartConfGrp OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIBObjects 1}
cwRsrcSvcAggrGrp OBJECT IDENTIFIER
::= {ciscoWANRsrcPartMIBObjects 2}
-- --------------------------------------------------------------------
-- Resource Partition MIB
-- --------------------------------------------------------------------
cwRsrcPartConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwRsrcPartConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring resource partition parameters.
A resource partition is configured on an interface whose
ifType is atmVirtual(149) or atm(37). An entry can be added,
deleted or modified. Entries in this table can be modified
through the commands provided by the CLI also."
::= { cwRsrcPartConfGrp 1 }
cwRsrcPartConfEntry OBJECT-TYPE
SYNTAX CwRsrcPartConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for a resource partition. A resource partition
has to be created before connections can be added to the
interface.
In the following objects, ingress direction means, from network
to switch, and egress direction means, from switch to network."
INDEX { ifIndex, cwRsrcPartID }
::= { cwRsrcPartConfTable 1 }
CwRsrcPartConfEntry ::=
SEQUENCE {
cwRsrcPartID Unsigned32,
cwRsrcPartController Unsigned32,
cwRsrcPartEgrGuarPctBwConf Unsigned32,
cwRsrcPartEgrMaxPctBwConf Unsigned32,
cwRsrcPartIngGuarPctBwConf Unsigned32,
cwRsrcPartIngMaxPctBwConf Unsigned32,
cwRsrcPartEgrPctBwUsed Unsigned32,
cwRsrcPartIngPctBwUsed Unsigned32,
cwRsrcPartEgrPctBwAvail Unsigned32,
cwRsrcPartIngPctBwAvail Unsigned32,
cwRsrcPartVpiLo Unsigned32,
cwRsrcPartVpiHigh Unsigned32,
cwRsrcPartVciLo Unsigned32,
cwRsrcPartVciHigh Unsigned32,
cwRsrcPartGuarCon Unsigned32,
cwRsrcPartMaxCon Unsigned32,
cwRsrcPartUsedCon Unsigned32,
cwRsrcPartAvailCon Unsigned32,
cwRsrcPartRowStatus RowStatus
}
cwRsrcPartID OBJECT-TYPE
SYNTAX Unsigned32 (1.. 255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is resource partition identifier. One interface can
have multiple resource partitions on it."
::= { cwRsrcPartConfEntry 1}
cwRsrcPartController OBJECT-TYPE
SYNTAX Unsigned32 (1.. 255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is controller identifier. Once a resource partition
is added the controller identified by this identifier
can access resources configured for this partition."
::= { cwRsrcPartConfEntry 2}
cwRsrcPartEgrGuarPctBwConf OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The guaranteed percentage bandwidth reserved for the
resource partition in egress direction.
The sum of all resource partition guaranteed
bandwidths cannot exceed 100% of interface's guaranteed
bandwidth."
DEFVAL { 0 }
::= { cwRsrcPartConfEntry 3 }
cwRsrcPartEgrMaxPctBwConf OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum percentage bandwidth for the resource partition
in egress direction. This is not the guaranteed bandwidth.
If bandwidth is available, the resource partition will be
allocated bandwidth up to this value."
DEFVAL { 0 }
::= { cwRsrcPartConfEntry 4 }
cwRsrcPartIngGuarPctBwConf OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The guaranteed percentage bandwidth reserved for the
resource partition in ingress direction.
The sum of all resource partition guaranteed
bandwidths cannot exceed 100% of the interface's guaranteed
bandwidth."
DEFVAL { 0 }
::= { cwRsrcPartConfEntry 5 }
cwRsrcPartIngMaxPctBwConf OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The maximum percentage bandwidth allocated for the resource
partition in ingress direction.
This is not the guaranteed bandwidth. If bandwidth
is available, the resource partition will be allocated
bandwidth up to this value."
DEFVAL { 0 }
::= { cwRsrcPartConfEntry 6 }
cwRsrcPartEgrPctBwUsed OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the percentage bandwidth used by the resource
partition in egress direction."
::= { cwRsrcPartConfEntry 7 }
cwRsrcPartIngPctBwUsed OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the percentage bandwidth used by the resource
partition in ingress direction."
::= { cwRsrcPartConfEntry 8 }
cwRsrcPartEgrPctBwAvail OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the percentage bandwidth available on the resource
partition in egress direction."
::= { cwRsrcPartConfEntry 9 }
cwRsrcPartIngPctBwAvail OBJECT-TYPE
SYNTAX Unsigned32 (0..1000000)
UNITS "0.0001 percentage"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This is the percentage bandwidth available on the resource
partition in ingress direction."
::= { cwRsrcPartConfEntry 10 }
cwRsrcPartVpiLo OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The beginning of the VPI range for this partition. Connections
provisioned on this partition must have a VPI greater than or
equal to this value."
::= { cwRsrcPartConfEntry 11 }
cwRsrcPartVpiHigh OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The end of the VPI range for this partition. Connections
provisioned on this partition must have a VPI less than or
equal to this value."
::= { cwRsrcPartConfEntry 12 }
cwRsrcPartVciLo OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The beginning of the VCI range for this partition. Connections
provisioned on this partition must have VCI greater than or
equal to this VCI."
::= { cwRsrcPartConfEntry 13 }
cwRsrcPartVciHigh OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The end of the VCI range reserved for this partition.
Connections provisioned on this partition must have a VCI
less than or equal to this VCI."
::= { cwRsrcPartConfEntry 14 }
cwRsrcPartGuarCon OBJECT-TYPE
SYNTAX Unsigned32 (0..131072)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The guaranteed number of connections that can be
configured on this partition."
DEFVAL {0}
::= { cwRsrcPartConfEntry 15 }
cwRsrcPartMaxCon OBJECT-TYPE
SYNTAX Unsigned32 (0..131072)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The maximum number of connections that can be configured on
this partition."
::= { cwRsrcPartConfEntry 16 }
cwRsrcPartUsedCon OBJECT-TYPE
SYNTAX Unsigned32 (0..131072)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of connections currently in use on this
partition."
::= { cwRsrcPartConfEntry 17 }
cwRsrcPartAvailCon OBJECT-TYPE
SYNTAX Unsigned32 (0..131072)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the number of connections available, that can be
added on this partition."
::= { cwRsrcPartConfEntry 18 }
cwRsrcPartRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This will add, delete or modify the partition. Resource
partition can be created by setting this object to
createAndGo(4). Row may be deleted by setting this object
to destroy(6)."
::= { cwRsrcPartConfEntry 19 }
-- --------------------------------------------------------------------
-- cwRsrcPartIlmi Table
-- --------------------------------------------------------------------
cwRsrcPartIlmiTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwRsrcPartIlmiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is the ILMI configuration table. If the interface supports
ILMI, the agent will automatically create a row in this table
when a row is created in cwRsrcPartConfTable. The ILMI objects
will be set with default values, i.e, with ILMI signalling
disabled."
::= { cwRsrcPartConfGrp 2 }
cwRsrcPartIlmiEntry OBJECT-TYPE
SYNTAX CwRsrcPartIlmiEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"If the interface supports ILMI, the agent will automatically
create an entry in this table when a resource partition is
created. By default, ILMI is disabled on resource partitions.
ILMI can be enabled by setting 'cwRsrcPartIlmiEnabled' to
'true'. An entry will be deleted from this table when
a corresponding resource partition entry is deleted from
cwRsrcPartConfTable."
INDEX { ifIndex, cwRsrcPartID }
::= { cwRsrcPartIlmiTable 1}
CwRsrcPartIlmiEntry ::=
SEQUENCE {
cwRsrcPartIlmiEnabled TruthValue,
cwRsrcPartSignallingVpi INTEGER,
cwRsrcPartSignallingVci INTEGER,
cwRsrcPartIlmiTrapEnable TruthValue,
cwRsrcPartIlmiEstablishConPollIntvl Unsigned32,
cwRsrcPartIlmiCheckConPollIntvl Unsigned32,
cwRsrcPartIlmiConPollInactFactor Unsigned32
}
cwRsrcPartIlmiEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"By setting the value of this object to 'true', ILMI signalling
is enabled on the resource partition."
DEFVAL {false}
::= { cwRsrcPartIlmiEntry 1 }
cwRsrcPartSignallingVpi OBJECT-TYPE
SYNTAX INTEGER (0..4095 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VPI on which signalling cells arrive on this
resource partition."
DEFVAL { 0 }
::= { cwRsrcPartIlmiEntry 2}
cwRsrcPartSignallingVci OBJECT-TYPE
SYNTAX INTEGER (0..65535 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the VCI on which signalling cells arrive on this
resource partition."
DEFVAL { 16 }
::= { cwRsrcPartIlmiEntry 3}
cwRsrcPartIlmiTrapEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ILMI trap generation can be enabled or disabled using
this object."
::= { cwRsrcPartIlmiEntry 4}
cwRsrcPartIlmiEstablishConPollIntvl OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time S between successive transmissions
of ILMI messages on this interface for the purpose of
detecting establishment of ILMI connectivity."
REFERENCE
"ATM Forum ILMI 4.0 Section 8.3.1"
DEFVAL { 1 }
::= { cwRsrcPartIlmiEntry 5 }
cwRsrcPartIlmiCheckConPollIntvl OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The amount of time T between successive transmissions
of ILMI messages on this interface for the purpose of
detecting loss of ILMI connectivity. The distinguished
value zero disables ILMI connectivity procedures on
this interface."
REFERENCE
"ATM Forum ILMI 4.0 Section 8.3.1"
DEFVAL { 5 }
::= { cwRsrcPartIlmiEntry 6 }
cwRsrcPartIlmiConPollInactFactor OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number K of consecutive polls on this interface
for which no ILMI response message is received before
ILMI connectivity is declared lost."
REFERENCE
"ATM Forum ILMI 4.0 Section 8.3.1"
DEFVAL { 4 }
::= { cwRsrcPartIlmiEntry 7 }
-- ----------------------------------------------------------------------
-- cwRsrcPartCtlrConf Table
-- ----------------------------------------------------------------------
cwRsrcPartCtlrConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwRsrcPartCtlrConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring additional controllers to
manage a resource partition."
::= { cwRsrcPartConfGrp 3 }
cwRsrcPartCtlrConfEntry OBJECT-TYPE
SYNTAX CwRsrcPartCtlrConfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for additional controllers to control an existing
resource partition. The resource partition, identified by
indices ifIndex and cwRsrcPartID, must exist in the
cwRsrcPartConfTable. An entry from this table is deleted if
the cwRsrcPartID associated entry from cwRsrcPartConfTable is
deleted."
INDEX { ifIndex, cwRsrcPartID, cwRsrcPartCtlrController}
::= { cwRsrcPartCtlrConfTable 1 }
CwRsrcPartCtlrConfEntry ::=
SEQUENCE {
cwRsrcPartCtlrController Unsigned32,
cwRsrcPartCtlrRowStatus RowStatus
}
cwRsrcPartCtlrController OBJECT-TYPE
SYNTAX Unsigned32 (1.. 255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This is controller identifier. One resource partition can be
controlled by multiple controllers.User may want to do this to
configure redundant controllers."
::= { cwRsrcPartCtlrConfEntry 1}
cwRsrcPartCtlrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is used to create a row in the cwRsrcPartCtlrConfTable.
A redundant controller is added by setting this object to
createAndGo(4).
Row may be deleted by setting this object to destroy(6)."
::= { cwRsrcPartCtlrConfEntry 2}
-- ---------------------------------------------------------------------
--
-- SVC Aggregate Table
--
-- ---------------------------------------------------------------------
cwRsrcSvcAggregateTable OBJECT-TYPE
SYNTAX SEQUENCE OF CwRsrcSvcAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuring an SVC aggregate resource within
a resource partition. This provides aggregate bandwidth and
VPI range within a resource partition that CAC (Call Admission
Control) can dynamically allocate the required resource from
it to establish a SVC connection for the incoming call.
The allocated bandwidth will become available in the SVC
aggregate when the call is torn down. When the required
bandwidth of an incoming call exceeds the bandwidth available
for SVC connection, the CAC will fail the establishment of the
new call."
::= { cwRsrcSvcAggrGrp 1 }
cwRsrcSvcAggregateEntry OBJECT-TYPE
SYNTAX CwRsrcSvcAggregateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry of SVC Aggregate.
An SVC Aggregate is used to reserve certain bandwidth
in the resource partition to be dedicated for call set-up."
INDEX { ifIndex, cwRsrcPartID }
::= { cwRsrcSvcAggregateTable 1 }
CwRsrcSvcAggregateEntry ::=
SEQUENCE {
cwRsrcSvcAggrVpiLow Unsigned32,
cwRsrcSvcAggrVpiHigh Unsigned32,
cwRsrcSvcAggrEgrPctBw Integer32,
cwRsrcSvcAggrIngPctBw Integer32,
cwRsrcSvcAggrChanVADTolerance Integer32,
cwRsrcSvcAggrChanVADDutyCycle Integer32,
cwRsrcSvcAggrRowStatus RowStatus
}
cwRsrcSvcAggrVpiLow OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The low end of the VPI range for this SVC aggregate.
This value has to be greater than or equal to the value of
cwRsrcPartVpiLo of the containing resource partition.
SVC connection provisioned on this SVC aggregate must have
a VPI greater than or equal to this value."
::= { cwRsrcSvcAggregateEntry 1}
cwRsrcSvcAggrVpiHigh OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The high end of the VPI range for this SVC aggregate.
This value has to be less than or equal to the value of
cwRsrcPartVpiHigh of the containing resource partition.
SVC connection provisioned on this SVC aggregate must have
a VPI less than or equal to this value.
If cwRsrcSvcAggrVpiLow and cwRsrcSvcAggrVpiHigh are equal,
then only one VSI is allocated for this SVC aggregate."
::= { cwRsrcSvcAggregateEntry 2}
cwRsrcSvcAggrEgrPctBw OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the percentage egress bandwidth that
is used by SVC connections within the resource partition.
The total egress bandwidth will be used by SVC connections
within the resource partition is determined by
multiplying the value of this object and
cwRsrcPartEgrGuarPctBwConf and port speed (ifSpeed).
Total egress bandwidth available to SVCs = ifSpeed *
cwRsrcPartEgrGuarPctBwConf *
cwRsrcSvcAggrEgrPctBw
Note that the total egress bandwidth for all PVC connections
on the resource partition plus the egress bandwidth of SVC
aggregate can't be greater than the maximum egress bandwidth
(cwRsrcPartEgrMaxPctBwConf) of the containing resource
partition."
::= { cwRsrcSvcAggregateEntry 3}
cwRsrcSvcAggrIngPctBw OBJECT-TYPE
SYNTAX Integer32 (1..100)
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object indicates the percentage ingress bandwidth that
is used by SVC connections within the resource partition.
The total ingress bandwidth will be used by SVC connections
within the resource partition is determined by
multiplying the value of this object and
cwRsrcPartIngGuarPctBwConf and port speed (ifSpeed).
Total ingress bandwidth available to SVCs = ifSpeed *
cwRsrcPartIngGuarPctBwConf *
cwRsrcSvcAggrIngPctBw
Note that the total ingress bandwidth for all PVC connections
on the resource partition plus the ingress bandwidth of SVC
aggregate can't be greater than the maximum ingress
bandwidth (cwRsrcPartIngMaxPctBwConf) of the containing
resource partition."
::= { cwRsrcSvcAggregateEntry 4}
cwRsrcSvcAggrChanVADTolerance OBJECT-TYPE
SYNTAX Integer32(1..10000)
UNITS "0.0001"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value in this object refers to the customer accepted
drop rate for voice connections when the bandwidth usage
exceeds allowed value.
The actual range of this object is 0.0001(or 0.01%) to
1.00(or 100%).
However, when the underlying CAC(Connection Admission Control)
module is notified of the change in this object, then the
value has to be divided by a factor of 10000."
DEFVAL { 100 }
::= { cwRsrcSvcAggregateEntry 5}
cwRsrcSvcAggrChanVADDutyCycle OBJECT-TYPE
SYNTAX Integer32(1..99)
UNITS "0.01"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object refers to the talk-spurts duty cycle.
The actual range of this object is 0.01(or 1%) to
0.99(or 99%).
When the value of this object is to be passed to underlying
CAC module this value has to be divided by 100."
DEFVAL {61}
::= { cwRsrcSvcAggregateEntry 6}
cwRsrcSvcAggrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"When an entry of the table is created, the following
objects are mandatory:
cwRsrcSvcAggrVpiLow
cwRsrcSvcAggrVpiHigh
cwRsrcSvcAggrEgrPctBw
cwRsrcSvcAggrIngPctBw "
::= { cwRsrcSvcAggregateEntry 7}
-- ---------------------------------------------------------------------
-- conformance information
-- ---------------------------------------------------------------------
cwRsrcPartMIBConformance OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIB 3}
cwRsrcPartMIBCompliances OBJECT IDENTIFIER
::= {cwRsrcPartMIBConformance 1}
cwRsrcPartMIBGroups OBJECT IDENTIFIER
::= {cwRsrcPartMIBConformance 2}
cwRsrcPartMIBCompliance MODULE-COMPLIANCE
STATUS deprecated -- superseded by cwRsrcPartMIBComplianceRev1
DESCRIPTION
"The Compliance statement for Resource partition
management group."
MODULE -- this module
MANDATORY-GROUPS { cwRsrcPartMIBGroup }
GROUP cwRsrcPartIlmiMIBGroup
DESCRIPTION
"Implementation of this group is not mandatory for the
switches which does not support
ILMI(Integrated Local Management Interface)."
GROUP cwRsrcPartMappingGroup
DESCRIPTION
"Implementation of this group is not mandatory for the
switches which do not support redundant controllers."
::= {cwRsrcPartMIBCompliances 1}
cwRsrcPartMIBComplianceRev1 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The Compliance statement for Resource partition
management group."
MODULE -- this module
MANDATORY-GROUPS { cwRsrcPartMIBGroup }
GROUP cwRsrcPartIlmiMIBGroup
DESCRIPTION
"Implementation of this group is not mandatory for the
switches which does not support
ILMI(Integrated Local Management Interface)."
GROUP cwRsrcPartMappingGroup
DESCRIPTION
"Implementation of this group is not mandatory for the
switches which do not support redundant controllers."
GROUP cwRsrcSvcAggrGroup
DESCRIPTION
"Implementation of this group is not mandatory for the
switches which does not support SVC aggregate."
::= {cwRsrcPartMIBCompliances 2}
-- units of conformance
cwRsrcPartMIBGroup OBJECT-GROUP
OBJECTS {
cwRsrcPartController,
cwRsrcPartEgrGuarPctBwConf,
cwRsrcPartEgrMaxPctBwConf,
cwRsrcPartIngGuarPctBwConf,
cwRsrcPartIngMaxPctBwConf,
cwRsrcPartEgrPctBwAvail,
cwRsrcPartIngPctBwAvail,
cwRsrcPartEgrPctBwUsed,
cwRsrcPartIngPctBwUsed,
cwRsrcPartVpiLo,
cwRsrcPartVpiHigh,
cwRsrcPartVciLo,
cwRsrcPartVciHigh,
cwRsrcPartGuarCon,
cwRsrcPartMaxCon,
cwRsrcPartUsedCon,
cwRsrcPartAvailCon,
cwRsrcPartRowStatus
}
STATUS current
DESCRIPTION
"These are objects related to Resource partition group."
::= { cwRsrcPartMIBGroups 1}
cwRsrcPartIlmiMIBGroup OBJECT-GROUP
OBJECTS {
cwRsrcPartIlmiEnabled,
cwRsrcPartSignallingVpi,
cwRsrcPartSignallingVci,
cwRsrcPartIlmiTrapEnable,
cwRsrcPartIlmiEstablishConPollIntvl,
cwRsrcPartIlmiCheckConPollIntvl,
cwRsrcPartIlmiConPollInactFactor
}
STATUS current
DESCRIPTION
"These are objects related to Ilmi configuration on a
Resource partition."
::= { cwRsrcPartMIBGroups 2}
cwRsrcPartMappingGroup OBJECT-GROUP
OBJECTS {
cwRsrcPartCtlrRowStatus
}
STATUS current
DESCRIPTION
"These are objects used to configure redundant controllers
for resource partitions."
::= { cwRsrcPartMIBGroups 3}
cwRsrcSvcAggrGroup OBJECT-GROUP
OBJECTS {
cwRsrcSvcAggrVpiLow,
cwRsrcSvcAggrVpiHigh,
cwRsrcSvcAggrEgrPctBw,
cwRsrcSvcAggrIngPctBw,
cwRsrcSvcAggrChanVADTolerance,
cwRsrcSvcAggrChanVADDutyCycle,
cwRsrcSvcAggrRowStatus
}
STATUS current
DESCRIPTION
"These are objects used to configure SVC aggregate within
resource partitions."
::= { cwRsrcPartMIBGroups 4}
END
Reference in New Issue View Git Blame Copy Permalink