mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
852 lines
30 KiB
Plaintext
852 lines
30 KiB
Plaintext
-- *****************************************************************
|
|
-- ciscoWANRsrcPart MIB
|
|
--
|
|
-- March, 2002
|
|
--
|
|
-- Copyright (c) 1999 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-WAN-RSRC-PART-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE,
|
|
Unsigned32,
|
|
Integer32 FROM SNMPv2-SMI
|
|
TruthValue,
|
|
RowStatus FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
ifIndex FROM IF-MIB
|
|
ciscoMgmt FROM CISCO-SMI;
|
|
|
|
|
|
ciscoWANRsrcPartMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200209140000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
"Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-wanatm@cisco.com"
|
|
|
|
DESCRIPTION
|
|
"The MIB module to manage resource partition objects. A resource
|
|
partition is configured on a virtual interface (ifType value
|
|
atmVirtual(149)) or atm interface (ifType value atm(37)).
|
|
An administrator can partition connection related resources like
|
|
VPI, VCI ranges, bandwidth and total amount of available connection
|
|
entries in the switch through these MIB tables.
|
|
|
|
Terminolgies used:
|
|
VSI - Virtual Switch Interface, a hardware-independent switch
|
|
control protocol. This allows a Switch to be
|
|
controlled by a multiple controllers such as PNNI, MPLS.
|
|
These control planes can be internal or external to the
|
|
switch.The VSI interface defines the messages and associated
|
|
functions which allow communication between the controller
|
|
and the switch.This interface is expected to support all
|
|
types of connections (voice,data,frame relay,ATM) for PVCs,
|
|
SPVCs and SVCs.
|
|
|
|
VSI Master - software component which requests connections and
|
|
receives switch generic information. This controls one or
|
|
more VSI Slaves. This may run on the switch or a dedicated
|
|
controller platform. This is the master module.It performs
|
|
the interface to the higher layer networking software and
|
|
handles all VSI related functions.
|
|
|
|
Controller - Software ( and possibly hardware) which manages
|
|
topology and network resources and performs VSI Master
|
|
function. This performs source routing for end-to-end SVCs,
|
|
including general call acceptance GCAC,setup calls with other
|
|
controllers.
|
|
PNNI and MPLS are examples of controllers.
|
|
|
|
ILMI - Integrated Local Management Interface (ILMI). An ATM
|
|
Forum defined, SNMP-based management protocol for an ATM UNI.
|
|
It provides interface status and configuration information,
|
|
and also supports dynamic ATM address registration.
|
|
|
|
CAC - Call Admission Control (CAC). When a new call coming to the
|
|
gateway, a process checks the availability of the resources
|
|
involved in the connection establishment before the gateway
|
|
sets up the call.
|
|
|
|
ATM - Asynchronous Transfer Mode (ATM).
|
|
PNNI - Private Network to Network Interface (PNNI).
|
|
MPLS - MultiProtocol Label Switching (MPLS).
|
|
GCAC - Generic Connection Admittance Control (GCAC).
|
|
PVC - Permanent Virtual Circuits (PVC).
|
|
SVC - Switched Virtual Circuits (SVC).
|
|
SPVC - Soft Permanent Virtual Circuits (SPVC).
|
|
VPI - Virtual Path Identifier (VPI).
|
|
VCI - Virtual Circuit Identifier (VCI).
|
|
"
|
|
|
|
REVISION "200209140000Z"
|
|
DESCRIPTION
|
|
"Added the cwRsrcSvcAggrTable to manage SVC aggregate
|
|
resources.
|
|
Added the cwRsrcPartMIBComplianceRev1 which supersedes the
|
|
cwRsrcPartMIBCompliance after the group cwRsrcSvcAggrGroup
|
|
was added."
|
|
|
|
REVISION "200203060000Z"
|
|
DESCRIPTION
|
|
"Made following changes:
|
|
(1) Changed cwRsrcPartSignallingVpi range to be consistent with
|
|
values defined in standard document.
|
|
(2) Changed cwRsrcPartIlmiTable description."
|
|
|
|
REVISION "9910120000Z"
|
|
DESCRIPTION
|
|
"Initial version of the MIB."
|
|
::= {ciscoMgmt 125 }
|
|
|
|
ciscoWANRsrcPartMIBObjects OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIB 1}
|
|
cwRsrcPartConfGrp OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIBObjects 1}
|
|
cwRsrcSvcAggrGrp OBJECT IDENTIFIER
|
|
::= {ciscoWANRsrcPartMIBObjects 2}
|
|
|
|
-- --------------------------------------------------------------------
|
|
-- Resource Partition MIB
|
|
-- --------------------------------------------------------------------
|
|
|
|
cwRsrcPartConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwRsrcPartConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for configuring resource partition parameters.
|
|
A resource partition is configured on an interface whose
|
|
ifType is atmVirtual(149) or atm(37). An entry can be added,
|
|
deleted or modified. Entries in this table can be modified
|
|
through the commands provided by the CLI also."
|
|
::= { cwRsrcPartConfGrp 1 }
|
|
|
|
cwRsrcPartConfEntry OBJECT-TYPE
|
|
SYNTAX CwRsrcPartConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for a resource partition. A resource partition
|
|
has to be created before connections can be added to the
|
|
interface.
|
|
In the following objects, ingress direction means, from network
|
|
to switch, and egress direction means, from switch to network."
|
|
INDEX { ifIndex, cwRsrcPartID }
|
|
::= { cwRsrcPartConfTable 1 }
|
|
|
|
CwRsrcPartConfEntry ::=
|
|
SEQUENCE {
|
|
cwRsrcPartID Unsigned32,
|
|
cwRsrcPartController Unsigned32,
|
|
cwRsrcPartEgrGuarPctBwConf Unsigned32,
|
|
cwRsrcPartEgrMaxPctBwConf Unsigned32,
|
|
cwRsrcPartIngGuarPctBwConf Unsigned32,
|
|
cwRsrcPartIngMaxPctBwConf Unsigned32,
|
|
cwRsrcPartEgrPctBwUsed Unsigned32,
|
|
cwRsrcPartIngPctBwUsed Unsigned32,
|
|
cwRsrcPartEgrPctBwAvail Unsigned32,
|
|
cwRsrcPartIngPctBwAvail Unsigned32,
|
|
cwRsrcPartVpiLo Unsigned32,
|
|
cwRsrcPartVpiHigh Unsigned32,
|
|
cwRsrcPartVciLo Unsigned32,
|
|
cwRsrcPartVciHigh Unsigned32,
|
|
cwRsrcPartGuarCon Unsigned32,
|
|
cwRsrcPartMaxCon Unsigned32,
|
|
cwRsrcPartUsedCon Unsigned32,
|
|
cwRsrcPartAvailCon Unsigned32,
|
|
cwRsrcPartRowStatus RowStatus
|
|
}
|
|
|
|
cwRsrcPartID OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is resource partition identifier. One interface can
|
|
have multiple resource partitions on it."
|
|
::= { cwRsrcPartConfEntry 1}
|
|
|
|
cwRsrcPartController OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 255)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is controller identifier. Once a resource partition
|
|
is added the controller identified by this identifier
|
|
can access resources configured for this partition."
|
|
::= { cwRsrcPartConfEntry 2}
|
|
|
|
cwRsrcPartEgrGuarPctBwConf OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The guaranteed percentage bandwidth reserved for the
|
|
resource partition in egress direction.
|
|
The sum of all resource partition guaranteed
|
|
bandwidths cannot exceed 100% of interface's guaranteed
|
|
bandwidth."
|
|
DEFVAL { 0 }
|
|
::= { cwRsrcPartConfEntry 3 }
|
|
|
|
cwRsrcPartEgrMaxPctBwConf OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum percentage bandwidth for the resource partition
|
|
in egress direction. This is not the guaranteed bandwidth.
|
|
If bandwidth is available, the resource partition will be
|
|
allocated bandwidth up to this value."
|
|
DEFVAL { 0 }
|
|
::= { cwRsrcPartConfEntry 4 }
|
|
|
|
cwRsrcPartIngGuarPctBwConf OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The guaranteed percentage bandwidth reserved for the
|
|
resource partition in ingress direction.
|
|
The sum of all resource partition guaranteed
|
|
bandwidths cannot exceed 100% of the interface's guaranteed
|
|
bandwidth."
|
|
DEFVAL { 0 }
|
|
::= { cwRsrcPartConfEntry 5 }
|
|
|
|
cwRsrcPartIngMaxPctBwConf OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
" The maximum percentage bandwidth allocated for the resource
|
|
partition in ingress direction.
|
|
This is not the guaranteed bandwidth. If bandwidth
|
|
is available, the resource partition will be allocated
|
|
bandwidth up to this value."
|
|
DEFVAL { 0 }
|
|
::= { cwRsrcPartConfEntry 6 }
|
|
|
|
cwRsrcPartEgrPctBwUsed OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is the percentage bandwidth used by the resource
|
|
partition in egress direction."
|
|
::= { cwRsrcPartConfEntry 7 }
|
|
|
|
cwRsrcPartIngPctBwUsed OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is the percentage bandwidth used by the resource
|
|
partition in ingress direction."
|
|
::= { cwRsrcPartConfEntry 8 }
|
|
|
|
cwRsrcPartEgrPctBwAvail OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is the percentage bandwidth available on the resource
|
|
partition in egress direction."
|
|
::= { cwRsrcPartConfEntry 9 }
|
|
|
|
cwRsrcPartIngPctBwAvail OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..1000000)
|
|
UNITS "0.0001 percentage"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
" This is the percentage bandwidth available on the resource
|
|
partition in ingress direction."
|
|
::= { cwRsrcPartConfEntry 10 }
|
|
|
|
cwRsrcPartVpiLo OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The beginning of the VPI range for this partition. Connections
|
|
provisioned on this partition must have a VPI greater than or
|
|
equal to this value."
|
|
::= { cwRsrcPartConfEntry 11 }
|
|
|
|
cwRsrcPartVpiHigh OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of the VPI range for this partition. Connections
|
|
provisioned on this partition must have a VPI less than or
|
|
equal to this value."
|
|
::= { cwRsrcPartConfEntry 12 }
|
|
|
|
cwRsrcPartVciLo OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The beginning of the VCI range for this partition. Connections
|
|
provisioned on this partition must have VCI greater than or
|
|
equal to this VCI."
|
|
::= { cwRsrcPartConfEntry 13 }
|
|
|
|
cwRsrcPartVciHigh OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The end of the VCI range reserved for this partition.
|
|
Connections provisioned on this partition must have a VCI
|
|
less than or equal to this VCI."
|
|
::= { cwRsrcPartConfEntry 14 }
|
|
|
|
cwRsrcPartGuarCon OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..131072)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The guaranteed number of connections that can be
|
|
configured on this partition."
|
|
DEFVAL {0}
|
|
::= { cwRsrcPartConfEntry 15 }
|
|
|
|
cwRsrcPartMaxCon OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..131072)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The maximum number of connections that can be configured on
|
|
this partition."
|
|
::= { cwRsrcPartConfEntry 16 }
|
|
|
|
cwRsrcPartUsedCon OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..131072)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of connections currently in use on this
|
|
partition."
|
|
::= { cwRsrcPartConfEntry 17 }
|
|
|
|
cwRsrcPartAvailCon OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..131072)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the number of connections available, that can be
|
|
added on this partition."
|
|
::= { cwRsrcPartConfEntry 18 }
|
|
|
|
cwRsrcPartRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This will add, delete or modify the partition. Resource
|
|
partition can be created by setting this object to
|
|
createAndGo(4). Row may be deleted by setting this object
|
|
to destroy(6)."
|
|
::= { cwRsrcPartConfEntry 19 }
|
|
|
|
-- --------------------------------------------------------------------
|
|
-- cwRsrcPartIlmi Table
|
|
-- --------------------------------------------------------------------
|
|
|
|
cwRsrcPartIlmiTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwRsrcPartIlmiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the ILMI configuration table. If the interface supports
|
|
ILMI, the agent will automatically create a row in this table
|
|
when a row is created in cwRsrcPartConfTable. The ILMI objects
|
|
will be set with default values, i.e, with ILMI signalling
|
|
disabled."
|
|
::= { cwRsrcPartConfGrp 2 }
|
|
|
|
cwRsrcPartIlmiEntry OBJECT-TYPE
|
|
SYNTAX CwRsrcPartIlmiEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"If the interface supports ILMI, the agent will automatically
|
|
create an entry in this table when a resource partition is
|
|
created. By default, ILMI is disabled on resource partitions.
|
|
ILMI can be enabled by setting 'cwRsrcPartIlmiEnabled' to
|
|
'true'. An entry will be deleted from this table when
|
|
a corresponding resource partition entry is deleted from
|
|
cwRsrcPartConfTable."
|
|
INDEX { ifIndex, cwRsrcPartID }
|
|
::= { cwRsrcPartIlmiTable 1}
|
|
|
|
CwRsrcPartIlmiEntry ::=
|
|
SEQUENCE {
|
|
cwRsrcPartIlmiEnabled TruthValue,
|
|
cwRsrcPartSignallingVpi INTEGER,
|
|
cwRsrcPartSignallingVci INTEGER,
|
|
cwRsrcPartIlmiTrapEnable TruthValue,
|
|
cwRsrcPartIlmiEstablishConPollIntvl Unsigned32,
|
|
cwRsrcPartIlmiCheckConPollIntvl Unsigned32,
|
|
cwRsrcPartIlmiConPollInactFactor Unsigned32
|
|
}
|
|
|
|
cwRsrcPartIlmiEnabled OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"By setting the value of this object to 'true', ILMI signalling
|
|
is enabled on the resource partition."
|
|
DEFVAL {false}
|
|
::= { cwRsrcPartIlmiEntry 1 }
|
|
|
|
cwRsrcPartSignallingVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VPI on which signalling cells arrive on this
|
|
resource partition."
|
|
DEFVAL { 0 }
|
|
::= { cwRsrcPartIlmiEntry 2}
|
|
|
|
cwRsrcPartSignallingVci OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535 )
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the VCI on which signalling cells arrive on this
|
|
resource partition."
|
|
DEFVAL { 16 }
|
|
::= { cwRsrcPartIlmiEntry 3}
|
|
|
|
cwRsrcPartIlmiTrapEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"ILMI trap generation can be enabled or disabled using
|
|
this object."
|
|
::= { cwRsrcPartIlmiEntry 4}
|
|
|
|
cwRsrcPartIlmiEstablishConPollIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time S between successive transmissions
|
|
of ILMI messages on this interface for the purpose of
|
|
detecting establishment of ILMI connectivity."
|
|
REFERENCE
|
|
"ATM Forum ILMI 4.0 Section 8.3.1"
|
|
DEFVAL { 1 }
|
|
::= { cwRsrcPartIlmiEntry 5 }
|
|
|
|
cwRsrcPartIlmiCheckConPollIntvl OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
UNITS "seconds"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The amount of time T between successive transmissions
|
|
of ILMI messages on this interface for the purpose of
|
|
detecting loss of ILMI connectivity. The distinguished
|
|
value zero disables ILMI connectivity procedures on
|
|
this interface."
|
|
REFERENCE
|
|
"ATM Forum ILMI 4.0 Section 8.3.1"
|
|
DEFVAL { 5 }
|
|
::= { cwRsrcPartIlmiEntry 6 }
|
|
|
|
cwRsrcPartIlmiConPollInactFactor OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The number K of consecutive polls on this interface
|
|
for which no ILMI response message is received before
|
|
ILMI connectivity is declared lost."
|
|
REFERENCE
|
|
"ATM Forum ILMI 4.0 Section 8.3.1"
|
|
DEFVAL { 4 }
|
|
::= { cwRsrcPartIlmiEntry 7 }
|
|
|
|
-- ----------------------------------------------------------------------
|
|
-- cwRsrcPartCtlrConf Table
|
|
-- ----------------------------------------------------------------------
|
|
|
|
cwRsrcPartCtlrConfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwRsrcPartCtlrConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for configuring additional controllers to
|
|
manage a resource partition."
|
|
::= { cwRsrcPartConfGrp 3 }
|
|
|
|
cwRsrcPartCtlrConfEntry OBJECT-TYPE
|
|
SYNTAX CwRsrcPartCtlrConfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry for additional controllers to control an existing
|
|
resource partition. The resource partition, identified by
|
|
indices ifIndex and cwRsrcPartID, must exist in the
|
|
cwRsrcPartConfTable. An entry from this table is deleted if
|
|
the cwRsrcPartID associated entry from cwRsrcPartConfTable is
|
|
deleted."
|
|
INDEX { ifIndex, cwRsrcPartID, cwRsrcPartCtlrController}
|
|
::= { cwRsrcPartCtlrConfTable 1 }
|
|
|
|
CwRsrcPartCtlrConfEntry ::=
|
|
SEQUENCE {
|
|
cwRsrcPartCtlrController Unsigned32,
|
|
cwRsrcPartCtlrRowStatus RowStatus
|
|
}
|
|
|
|
cwRsrcPartCtlrController OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1.. 255)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is controller identifier. One resource partition can be
|
|
controlled by multiple controllers.User may want to do this to
|
|
configure redundant controllers."
|
|
::= { cwRsrcPartCtlrConfEntry 1}
|
|
|
|
cwRsrcPartCtlrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is used to create a row in the cwRsrcPartCtlrConfTable.
|
|
A redundant controller is added by setting this object to
|
|
createAndGo(4).
|
|
Row may be deleted by setting this object to destroy(6)."
|
|
::= { cwRsrcPartCtlrConfEntry 2}
|
|
|
|
-- ---------------------------------------------------------------------
|
|
--
|
|
-- SVC Aggregate Table
|
|
--
|
|
-- ---------------------------------------------------------------------
|
|
cwRsrcSvcAggregateTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CwRsrcSvcAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is for configuring an SVC aggregate resource within
|
|
a resource partition. This provides aggregate bandwidth and
|
|
VPI range within a resource partition that CAC (Call Admission
|
|
Control) can dynamically allocate the required resource from
|
|
it to establish a SVC connection for the incoming call.
|
|
|
|
The allocated bandwidth will become available in the SVC
|
|
aggregate when the call is torn down. When the required
|
|
bandwidth of an incoming call exceeds the bandwidth available
|
|
for SVC connection, the CAC will fail the establishment of the
|
|
new call."
|
|
::= { cwRsrcSvcAggrGrp 1 }
|
|
|
|
cwRsrcSvcAggregateEntry OBJECT-TYPE
|
|
SYNTAX CwRsrcSvcAggregateEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry of SVC Aggregate.
|
|
An SVC Aggregate is used to reserve certain bandwidth
|
|
in the resource partition to be dedicated for call set-up."
|
|
INDEX { ifIndex, cwRsrcPartID }
|
|
::= { cwRsrcSvcAggregateTable 1 }
|
|
|
|
CwRsrcSvcAggregateEntry ::=
|
|
SEQUENCE {
|
|
cwRsrcSvcAggrVpiLow Unsigned32,
|
|
cwRsrcSvcAggrVpiHigh Unsigned32,
|
|
cwRsrcSvcAggrEgrPctBw Integer32,
|
|
cwRsrcSvcAggrIngPctBw Integer32,
|
|
cwRsrcSvcAggrChanVADTolerance Integer32,
|
|
cwRsrcSvcAggrChanVADDutyCycle Integer32,
|
|
cwRsrcSvcAggrRowStatus RowStatus
|
|
}
|
|
|
|
cwRsrcSvcAggrVpiLow OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The low end of the VPI range for this SVC aggregate.
|
|
This value has to be greater than or equal to the value of
|
|
cwRsrcPartVpiLo of the containing resource partition.
|
|
SVC connection provisioned on this SVC aggregate must have
|
|
a VPI greater than or equal to this value."
|
|
::= { cwRsrcSvcAggregateEntry 1}
|
|
|
|
cwRsrcSvcAggrVpiHigh OBJECT-TYPE
|
|
SYNTAX Unsigned32 (0..4095)
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The high end of the VPI range for this SVC aggregate.
|
|
This value has to be less than or equal to the value of
|
|
cwRsrcPartVpiHigh of the containing resource partition.
|
|
SVC connection provisioned on this SVC aggregate must have
|
|
a VPI less than or equal to this value.
|
|
|
|
If cwRsrcSvcAggrVpiLow and cwRsrcSvcAggrVpiHigh are equal,
|
|
then only one VSI is allocated for this SVC aggregate."
|
|
::= { cwRsrcSvcAggregateEntry 2}
|
|
|
|
cwRsrcSvcAggrEgrPctBw OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the percentage egress bandwidth that
|
|
is used by SVC connections within the resource partition.
|
|
|
|
The total egress bandwidth will be used by SVC connections
|
|
within the resource partition is determined by
|
|
multiplying the value of this object and
|
|
cwRsrcPartEgrGuarPctBwConf and port speed (ifSpeed).
|
|
|
|
Total egress bandwidth available to SVCs = ifSpeed *
|
|
cwRsrcPartEgrGuarPctBwConf *
|
|
cwRsrcSvcAggrEgrPctBw
|
|
|
|
Note that the total egress bandwidth for all PVC connections
|
|
on the resource partition plus the egress bandwidth of SVC
|
|
aggregate can't be greater than the maximum egress bandwidth
|
|
(cwRsrcPartEgrMaxPctBwConf) of the containing resource
|
|
partition."
|
|
::= { cwRsrcSvcAggregateEntry 3}
|
|
|
|
cwRsrcSvcAggrIngPctBw OBJECT-TYPE
|
|
SYNTAX Integer32 (1..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object indicates the percentage ingress bandwidth that
|
|
is used by SVC connections within the resource partition.
|
|
|
|
The total ingress bandwidth will be used by SVC connections
|
|
within the resource partition is determined by
|
|
multiplying the value of this object and
|
|
cwRsrcPartIngGuarPctBwConf and port speed (ifSpeed).
|
|
|
|
Total ingress bandwidth available to SVCs = ifSpeed *
|
|
cwRsrcPartIngGuarPctBwConf *
|
|
cwRsrcSvcAggrIngPctBw
|
|
|
|
Note that the total ingress bandwidth for all PVC connections
|
|
on the resource partition plus the ingress bandwidth of SVC
|
|
aggregate can't be greater than the maximum ingress
|
|
bandwidth (cwRsrcPartIngMaxPctBwConf) of the containing
|
|
resource partition."
|
|
::= { cwRsrcSvcAggregateEntry 4}
|
|
|
|
cwRsrcSvcAggrChanVADTolerance OBJECT-TYPE
|
|
SYNTAX Integer32(1..10000)
|
|
UNITS "0.0001"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value in this object refers to the customer accepted
|
|
drop rate for voice connections when the bandwidth usage
|
|
exceeds allowed value.
|
|
|
|
The actual range of this object is 0.0001(or 0.01%) to
|
|
1.00(or 100%).
|
|
|
|
However, when the underlying CAC(Connection Admission Control)
|
|
module is notified of the change in this object, then the
|
|
value has to be divided by a factor of 10000."
|
|
DEFVAL { 100 }
|
|
::= { cwRsrcSvcAggregateEntry 5}
|
|
|
|
cwRsrcSvcAggrChanVADDutyCycle OBJECT-TYPE
|
|
SYNTAX Integer32(1..99)
|
|
UNITS "0.01"
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object refers to the talk-spurts duty cycle.
|
|
|
|
The actual range of this object is 0.01(or 1%) to
|
|
0.99(or 99%).
|
|
|
|
When the value of this object is to be passed to underlying
|
|
CAC module this value has to be divided by 100."
|
|
DEFVAL {61}
|
|
::= { cwRsrcSvcAggregateEntry 6}
|
|
|
|
cwRsrcSvcAggrRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"When an entry of the table is created, the following
|
|
objects are mandatory:
|
|
cwRsrcSvcAggrVpiLow
|
|
cwRsrcSvcAggrVpiHigh
|
|
cwRsrcSvcAggrEgrPctBw
|
|
cwRsrcSvcAggrIngPctBw "
|
|
::= { cwRsrcSvcAggregateEntry 7}
|
|
|
|
-- ---------------------------------------------------------------------
|
|
-- conformance information
|
|
-- ---------------------------------------------------------------------
|
|
|
|
cwRsrcPartMIBConformance OBJECT IDENTIFIER ::= {ciscoWANRsrcPartMIB 3}
|
|
|
|
cwRsrcPartMIBCompliances OBJECT IDENTIFIER
|
|
::= {cwRsrcPartMIBConformance 1}
|
|
cwRsrcPartMIBGroups OBJECT IDENTIFIER
|
|
::= {cwRsrcPartMIBConformance 2}
|
|
|
|
cwRsrcPartMIBCompliance MODULE-COMPLIANCE
|
|
STATUS deprecated -- superseded by cwRsrcPartMIBComplianceRev1
|
|
DESCRIPTION
|
|
"The Compliance statement for Resource partition
|
|
management group."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { cwRsrcPartMIBGroup }
|
|
GROUP cwRsrcPartIlmiMIBGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is not mandatory for the
|
|
switches which does not support
|
|
ILMI(Integrated Local Management Interface)."
|
|
|
|
GROUP cwRsrcPartMappingGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is not mandatory for the
|
|
switches which do not support redundant controllers."
|
|
|
|
::= {cwRsrcPartMIBCompliances 1}
|
|
|
|
cwRsrcPartMIBComplianceRev1 MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Compliance statement for Resource partition
|
|
management group."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { cwRsrcPartMIBGroup }
|
|
GROUP cwRsrcPartIlmiMIBGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is not mandatory for the
|
|
switches which does not support
|
|
ILMI(Integrated Local Management Interface)."
|
|
|
|
GROUP cwRsrcPartMappingGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is not mandatory for the
|
|
switches which do not support redundant controllers."
|
|
|
|
GROUP cwRsrcSvcAggrGroup
|
|
DESCRIPTION
|
|
"Implementation of this group is not mandatory for the
|
|
switches which does not support SVC aggregate."
|
|
|
|
::= {cwRsrcPartMIBCompliances 2}
|
|
|
|
-- units of conformance
|
|
cwRsrcPartMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cwRsrcPartController,
|
|
cwRsrcPartEgrGuarPctBwConf,
|
|
cwRsrcPartEgrMaxPctBwConf,
|
|
cwRsrcPartIngGuarPctBwConf,
|
|
cwRsrcPartIngMaxPctBwConf,
|
|
cwRsrcPartEgrPctBwAvail,
|
|
cwRsrcPartIngPctBwAvail,
|
|
cwRsrcPartEgrPctBwUsed,
|
|
cwRsrcPartIngPctBwUsed,
|
|
cwRsrcPartVpiLo,
|
|
cwRsrcPartVpiHigh,
|
|
cwRsrcPartVciLo,
|
|
cwRsrcPartVciHigh,
|
|
cwRsrcPartGuarCon,
|
|
cwRsrcPartMaxCon,
|
|
cwRsrcPartUsedCon,
|
|
cwRsrcPartAvailCon,
|
|
cwRsrcPartRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These are objects related to Resource partition group."
|
|
::= { cwRsrcPartMIBGroups 1}
|
|
|
|
cwRsrcPartIlmiMIBGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cwRsrcPartIlmiEnabled,
|
|
cwRsrcPartSignallingVpi,
|
|
cwRsrcPartSignallingVci,
|
|
cwRsrcPartIlmiTrapEnable,
|
|
cwRsrcPartIlmiEstablishConPollIntvl,
|
|
cwRsrcPartIlmiCheckConPollIntvl,
|
|
cwRsrcPartIlmiConPollInactFactor
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These are objects related to Ilmi configuration on a
|
|
Resource partition."
|
|
::= { cwRsrcPartMIBGroups 2}
|
|
|
|
cwRsrcPartMappingGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cwRsrcPartCtlrRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These are objects used to configure redundant controllers
|
|
for resource partitions."
|
|
::= { cwRsrcPartMIBGroups 3}
|
|
|
|
cwRsrcSvcAggrGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cwRsrcSvcAggrVpiLow,
|
|
cwRsrcSvcAggrVpiHigh,
|
|
cwRsrcSvcAggrEgrPctBw,
|
|
cwRsrcSvcAggrIngPctBw,
|
|
cwRsrcSvcAggrChanVADTolerance,
|
|
cwRsrcSvcAggrChanVADDutyCycle,
|
|
cwRsrcSvcAggrRowStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"These are objects used to configure SVC aggregate within
|
|
resource partitions."
|
|
|
|
::= { cwRsrcPartMIBGroups 4}
|
|
|
|
|
|
END
|
|
|
|
|
|
|
|
|