MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-WAN-FR-SIGNALING-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

829 lines
25 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- ciscoWanFrSignalingMIB
--
-- September 2002, Subra.Hegde
--
-- Copyright (c) 2002 by cisco Systems, Inc.
-- All rights reserved.
-- *****************************************************************
CISCO-WAN-FR-SIGNALING-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Counter32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP FROM SNMPv2-CONF
frPortCnfSig,
frPortCntSig FROM BASIS-MIB
ciscoWan FROM CISCOWAN-SMI;
ciscoWanFrSignalingMIB MODULE-IDENTITY
LAST-UPDATED "200303240000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-wanatm@cisco.com"
DESCRIPTION
"The MIB module to configure LMI and CLLM
on a frame relay ports. This mib module also
contains objects to represent LMI and CLLM
statistics information. The frame relay logical
port is referred to as 'frame relay port' in this
mib. The 'logical port' refers to frame relay
port.
LMI : Local Management Interface.
The Frame Relay LMI is a set of enhancements to
the basic Frame Relay Specification. The Key
Frame Relay LMI extensions include global addressing,
virtual circuit status messages and multicasting.
The LMI includes support for a keepalive mechanism,
which verifies that data is flowing, and a status
mechanism, which provides an on-going status report
on the DLCIs known to the switch.
The LMI Global Addressing extension gives Frame Relay
DLCI values global rather than local significance.
The global addressing extension adds functionality
and manageability to Frame Relay internetworks.
The LMI virtual circuit messages provide communication
and synchronization between Frame Relay DTE and
DCE devices. These messages are periodically report
on the status of PVCs, which prevents data from being
sent into black holes(that, over PVCs that no longer
exist).
LMI UNI signaling enables subscribers to find out
about the PVC status of the network, thus inhibiting
the use of an unavailable PVC and supplies procedures
for detecting and modifying following events:
* deletion of a PVC
* addition of a PVC
* availability of a configured PVC
* unavailability of a configured PVC
* error due to LMI message sequencing
ELMI : Enhanced LMI
ELMI allows the router to learn QoS(Quality of
Service) parameters from the switch and use them
for traffic shaping, configuration or management
purposes.
CLLM : Consolidated Link Layer Management.
The CLLM is an out-of-band mechanism to transport
congestion-related information to the far end.
The CLLM enables the Frame Relay network to more
efficiently relay congestion notifications to the DTE(router).
The CLLM congestion notification is sent on the reserved
data link connection identifier(DLCI) 1023.
Frame Forwarding Port: Frame Forwarding Ports are identified
by portType = frame-forward(3). The signaling parameters
are not applicable to these ports."
-- REFERENCE
-- "LMI: ANSI T1.617 Annex D, ITU Q.933 Annex A."
-- "CLLM: ANSI T1.618/ITU Q.922 Annex A."
REVISION "200303240000Z"
DESCRIPTION
"Added portLmiSigConfMethod mib object to support LMI
Autosense feature"
REVISION "200209040000Z"
DESCRIPTION
"Initial version of the MIB.
The content of this MIB was originally available
in CISCO-WAN-AXIPOP-MIB defined using SMIv1.
The applicable objects from CISCO-WAN-AXIPOP-MIB
are defined using SMIv2 in this MIB. Also the
descriptions of some of the objects have been
modified."
::= { ciscoWan 46 }
frPortCnfSigLMIGrp OBJECT IDENTIFIER ::= { frPortCnfSig 1 }
-- ------------------------------------------------------------------------
--
-- frPortCnfSigLMI group
-- Port configurable signalling parameters
--
-- ------------------------------------------------------------------------
frPortCnfSigLMIGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortCnfSigLMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for configuration of
singaling(LMI) on frame relay ports."
::= { frPortCnfSigLMIGrp 1 }
frPortCnfSigLMIGrpEntry OBJECT-TYPE
SYNTAX FrPortCnfSigLMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each frame relay port. The entries
are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
This table is not applicable for Frame Forwarding
ports,i.e portType = frame-forward(3)."
INDEX { lmiCnfPortNum }
::= { frPortCnfSigLMIGrpTable 1 }
FrPortCnfSigLMIGrpEntry ::=
SEQUENCE {
lmiCnfPortNum Integer32,
signallingProtocolType INTEGER,
asynchronousUpdates INTEGER,
t391LinkIntegrityTimer Integer32,
t392PollingVerificationTimer Integer32,
n391FullStatusPollingCounter Integer32,
n392ErrorThreshold Integer32,
n393MonitoredEventCount Integer32,
enhancedLmi INTEGER,
portFRF1Dot2Support INTEGER,
portLmiSigConfMethod INTEGER
}
lmiCnfPortNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.
The Frame Forwarding Port value is not valid for
this object."
REFERENCE
"portNum object in CISCO-WAN-FR-PORT-MIB.my"
::= { frPortCnfSigLMIGrpEntry 1}
signallingProtocolType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
noSignalling(2),
strataLMI(3),
annexAUNI(4),
annexDUNI(5),
annexANNI(6),
annexDNNI(7)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object is used for configuring
the LMI signaling protocol type.
1 - other. Not a valid value for SET request.
2 - noSignalling
3 - strataLMI
4 - annexAUNI
5 - annexDUNI
6 - annexANNI
7 - annexDNNI
The ports with portType = frame-forward(3)
can be set to noSingalling(2) only.
The value strataLMI(3) is not supported for
portHeaderLen = fourOctets(2)."
REFERENCE
"ANSI T1.617 Annex D, ITU Q.933 Annex A."
DEFVAL { noSignalling }
::= { frPortCnfSigLMIGrpEntry 2}
asynchronousUpdates OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2),
fsenable(3),
updfsenable(4)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for configuring asynchronous
updates.
The possible values are :
disable(1) : disable Asynchronous Status Updates
& Unsolicited Full Status
enable(2) : enable Asynchronous Status Updates
fsenable(3) : enable Unsolicited Full Status
updfsenable(4) : enable Asynchronous Status Updates &
Unsolicited Full Status."
DEFVAL { disable }
::= { frPortCnfSigLMIGrpEntry 3}
t391LinkIntegrityTimer OBJECT-TYPE
SYNTAX Integer32 (5..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the desired
User-side T391 link integrity verification polling
timer value for this UNI/NNI logical port."
DEFVAL { 10 }
::= { frPortCnfSigLMIGrpEntry 4}
t392PollingVerificationTimer OBJECT-TYPE
SYNTAX Integer32 (5..30)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the desired
Network-side T392 polling verification timer value
(nT2 for LMI) for this UNI/NNI logical port.
This is the length of time the network should
wait between Status Inquiry Messages."
DEFVAL { 15 }
::= { frPortCnfSigLMIGrpEntry 5}
n391FullStatusPollingCounter OBJECT-TYPE
SYNTAX Integer32 (1..255)
UNITS "Polls"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the
User-Side 391 full status polling cycle value
for this UNI/NNI logical port."
REFERENCE
"Q.933 Annex A [22],
T1.617 Annex D [17]"
DEFVAL { 6 }
::= { frPortCnfSigLMIGrpEntry 6}
n392ErrorThreshold OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the desired
User-side/Network-side N392 error threshold value for this
UNI/NNI logical port."
REFERENCE
"Q.933 Annex A [22],
T1.617 Annex D [17]"
DEFVAL { 3 }
::= { frPortCnfSigLMIGrpEntry 7}
n393MonitoredEventCount OBJECT-TYPE
SYNTAX Integer32 (1..10)
UNITS "Events"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The value of this object identifies the desired
User-side/Network-side N393 monitored events count
value for this UNI/NNI logical port."
REFERENCE
"Q.933 Annex A [22],
T1.617 Annex D [17]"
DEFVAL { 4 }
::= { frPortCnfSigLMIGrpEntry 8}
enhancedLmi OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables/disables the Enhanced LMI
(ELMI) on the frame relay port."
DEFVAL { disable }
::= { frPortCnfSigLMIGrpEntry 9}
portFRF1Dot2Support OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object enables/disables the FRF 1.2 feature.
This object is added for FRSM12.
This object is not applicable to MGX Release 1.x
"
REFERENCE
"FRF 1.2"
DEFVAL { disable }
::= { frPortCnfSigLMIGrpEntry 10}
portLmiSigConfMethod OBJECT-TYPE
SYNTAX INTEGER {
manual (1),
autosense(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"
This object enables/disables the port LMI signalling autosense.
Setting this object to autosense(2) enables the port to
autodetect and configure port LMI signalling type.
signallingProtocolType mib should be set to noSignalling
while this object is being set to autosense(2). If
signallingProtocolType mib is set to a value other than
noSignalling while this object is being set to autosense(2),
the set request fails.
When this object is set to manual(1), user needs to manually
configure the port LMI signalling type using the
signallingProtocolType mib. signallingProtocolType can be
configured to any valid value including noSignalling when
this object is set to manual(1).
"
DEFVAL { manual }
::= { frPortCnfSigLMIGrpEntry 11}
frPortCntSigLMIGrp OBJECT IDENTIFIER ::= { frPortCntSig 1 }
-- ------------------------------------------------------------------------
--
-- frPortCntSigLMI group
-- Port counter signalling values
--
-- ------------------------------------------------------------------------
frPortCntSigLMIGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortCntSigLMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the LMI statistics
of frame relay ports."
::= { frPortCntSigLMIGrp 1 }
frPortCntSigLMIGrpEntry OBJECT-TYPE
SYNTAX FrPortCntSigLMIGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each frame relay port.
Each entry identifies the LMI statistics supported
on a frame relay port.
The entries are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
This table is not applicable for Frame Forwarding
ports,i.e portType = frame-forward(3)."
INDEX { lmiSigPortNum }
::= { frPortCntSigLMIGrpTable 1 }
FrPortCntSigLMIGrpEntry ::=
SEQUENCE {
lmiSigPortNum Integer32,
rcvStatusInquiry Counter32,
rcvInvalidRequest Counter32,
rcvUNISeqMismatch Counter32,
xmtStatus Counter32,
xmtAsynchUpdate Counter32,
uniSignalingTimeout Counter32,
xmtStatusInquiry Counter32,
rcvStatus Counter32,
rcvAsynchUpdate Counter32,
rcvNNISeqMismatch Counter32,
nniSignalingTimeout Counter32
}
lmiSigPortNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object refers to
the frame relay port. The value for
this object must be same as the 'portNum'
object defined in frPortCnfPortGrpTable.
The frame forwarding port value is not valid
for this object."
REFERENCE
"portNum object in CISCO-WAN-FR-PORT-MIB.my"
::= { frPortCntSigLMIGrpEntry 1}
rcvStatusInquiry OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Status Inquiry messages received."
::= { frPortCntSigLMIGrpEntry 2}
rcvInvalidRequest OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Invalid Request messages received."
::= { frPortCntSigLMIGrpEntry 3}
rcvUNISeqMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times UNI messages
with sequence number mismatches were received."
::= { frPortCntSigLMIGrpEntry 4}
xmtStatus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Status response messages
transmitted."
::= { frPortCntSigLMIGrpEntry 5}
xmtAsynchUpdate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Asynch Status messages
transmitted."
::= { frPortCntSigLMIGrpEntry 6}
uniSignalingTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times UNI Status requests
were not received."
::= { frPortCntSigLMIGrpEntry 7}
xmtStatusInquiry OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Status Inquiry messages transmitted."
::= { frPortCntSigLMIGrpEntry 8}
rcvStatus OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Status response messages received."
::= { frPortCntSigLMIGrpEntry 9}
rcvAsynchUpdate OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times Asynch Status messages received
"
::= { frPortCntSigLMIGrpEntry 10}
rcvNNISeqMismatch OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times NNI messages
with sequence number mismatches were received."
::= { frPortCntSigLMIGrpEntry 11}
nniSignalingTimeout OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times NNI Status requests were
not received."
::= { frPortCntSigLMIGrpEntry 12}
frPortCnfSigCLLMGrp OBJECT IDENTIFIER ::= { frPortCnfSig 2 }
-- ------------------------------------------------------------------------
--
-- frPortCnfSigCLLM group
-- Port configurable signalling parameters
--
-- ------------------------------------------------------------------------
frPortCnfSigCLLMGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortCnfSigCLLMGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is configuring the CLLM on
frame relay ports. This table is not
applicable for Frame Forwarding ports."
::= { frPortCnfSigCLLMGrp 1 }
frPortCnfSigCLLMGrpEntry OBJECT-TYPE
SYNTAX FrPortCnfSigCLLMGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry for each frame relay port. The entries
are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
This table is not applicable for Frame Forwarding
ports,i.e portType = frame-forward(3)."
INDEX { cllmCnfPortNum }
::= { frPortCnfSigCLLMGrpTable 1 }
FrPortCnfSigCLLMGrpEntry ::=
SEQUENCE {
cllmCnfPortNum Integer32,
cllmEnable INTEGER,
xmtCLLMStatusTimer Integer32,
rcvCLLMStatusTimer INTEGER
}
cllmCnfPortNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.
The Frame Forwarding Port value is not valid for
this object."
REFERENCE
"portNum object in CISCO-WAN-FR-PORT-MIB.my"
::= { frPortCnfSigCLLMGrpEntry 1}
cllmEnable OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
enable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used for enabling/disabling
CLLM on frame relay port.
When set to 'disabled', CLLM is disabled.
When set to 'enabled', CLLM is enabled."
DEFVAL { disable }
::= { frPortCnfSigCLLMGrpEntry 2}
xmtCLLMStatusTimer OBJECT-TYPE
SYNTAX Integer32 (40..5000)
UNITS "milli-seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Interval in milliseconds for CLLM to send CLLM updates."
DEFVAL { 40 }
::= { frPortCnfSigCLLMGrpEntry 3}
rcvCLLMStatusTimer OBJECT-TYPE
SYNTAX INTEGER { rcvCLLMTimerValue (1000) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Timeout value for receiving CLLM updates."
DEFVAL { rcvCLLMTimerValue }
::= { frPortCnfSigCLLMGrpEntry 4}
frPortCntSigCLLMGrp OBJECT IDENTIFIER ::= { frPortCntSig 2 }
-- ------------------------------------------------------------------------
--
-- frPortCntSigCLLM group
-- Port counter signalling values
--
-- ------------------------------------------------------------------------
frPortCntSigCLLMGrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF FrPortCntSigCLLMGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is for CLLM statistics for
frame relay ports."
::= { frPortCntSigCLLMGrp 1 }
frPortCntSigCLLMGrpEntry OBJECT-TYPE
SYNTAX FrPortCntSigCLLMGrpEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" An entry for frame relay port.
The entries are applicable only for following ports:
portType = frame-relay(1),
portType = frFUNI(2).
This table is not applicable for Frame Forwarding
ports,i.e portType = frame-forward(3)."
INDEX { cllmSigPortNum }
::= { frPortCntSigCLLMGrpTable 1 }
FrPortCntSigCLLMGrpEntry ::=
SEQUENCE {
cllmSigPortNum Integer32,
rcvFramesCLLM Counter32,
rcvBytesCLLM Counter32,
xmtFramesCLLM Counter32,
xmtBytesCLLM Counter32,
cllmFailures Counter32
}
cllmSigPortNum OBJECT-TYPE
SYNTAX Integer32(1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of this object identifies the frame
relay port. The value of this object must be
same as the value of 'portNum' from frPortCnfPortGrpTable.
The Frame Forwarding Port value is not valid for
this object."
REFERENCE
"portNum object in CISCO-WAN-FR-PORT-MIB.my"
::= { frPortCntSigCLLMGrpEntry 1}
rcvFramesCLLM OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLLM frames received."
::= { frPortCntSigCLLMGrpEntry 2}
rcvBytesCLLM OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLLM bytes received."
::= { frPortCntSigCLLMGrpEntry 3}
xmtFramesCLLM OBJECT-TYPE
SYNTAX Counter32
UNITS "frames"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLLM frames transmitted."
::= { frPortCntSigCLLMGrpEntry 4}
xmtBytesCLLM OBJECT-TYPE
SYNTAX Counter32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of CLLM bytes transmitted."
::= { frPortCntSigCLLMGrpEntry 5}
cllmFailures OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of times an expected CLLM
message was not received."
::= { frPortCntSigCLLMGrpEntry 6}
-- conformance information
cwfSignalingMIBConformance OBJECT IDENTIFIER ::= { ciscoWanFrSignalingMIB 2 }
cwfSignalingMIBGroups OBJECT IDENTIFIER ::= { cwfSignalingMIBConformance 1 }
cwfSignalingMIBCompliances OBJECT IDENTIFIER ::= { cwfSignalingMIBConformance 2 }
-- compliance statements
cwfSignalingMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which have
network interfaces."
MODULE -- this module
MANDATORY-GROUPS {
ciscoWanFrLmiConfigGroup,
ciscoWanFrLmiStatsGroup,
ciscoWanFrCllmGroup,
ciscoWanFrCllmStatsGroup
}
::= { cwfSignalingMIBCompliances 1 }
ciscoWanFrLmiConfigGroup OBJECT-GROUP
OBJECTS {
lmiCnfPortNum,
signallingProtocolType,
asynchronousUpdates,
t391LinkIntegrityTimer,
t392PollingVerificationTimer,
n391FullStatusPollingCounter,
n392ErrorThreshold,
n393MonitoredEventCount,
enhancedLmi,
portFRF1Dot2Support,
portLmiSigConfMethod
}
STATUS current
DESCRIPTION
"A collection of objects providing information
applicable to Frame Relay Logical Ports
(Frame Relay Ports)."
::= { cwfSignalingMIBGroups 1 }
ciscoWanFrLmiStatsGroup OBJECT-GROUP
OBJECTS {
lmiSigPortNum,
rcvStatusInquiry,
rcvInvalidRequest,
rcvUNISeqMismatch,
xmtStatus,
xmtAsynchUpdate,
uniSignalingTimeout,
xmtStatusInquiry,
rcvStatus,
rcvAsynchUpdate,
rcvNNISeqMismatch,
nniSignalingTimeout
}
STATUS current
DESCRIPTION
"A collection of objects providing information
applicable to LMI statistics on Frame Relay Ports."
::= { cwfSignalingMIBGroups 2 }
ciscoWanFrCllmGroup OBJECT-GROUP
OBJECTS {
cllmCnfPortNum ,
cllmEnable,
xmtCLLMStatusTimer,
rcvCLLMStatusTimer
}
STATUS current
DESCRIPTION
"A collection of objects providing information
on CLLM applicable to Frame Relay Ports."
::= { cwfSignalingMIBGroups 3 }
ciscoWanFrCllmStatsGroup OBJECT-GROUP
OBJECTS {
cllmSigPortNum,
rcvFramesCLLM,
rcvBytesCLLM,
xmtFramesCLLM,
xmtBytesCLLM,
cllmFailures
}
STATUS current
DESCRIPTION
"A collection of objects providing information
applicable to CLLMI statistics on Frame Relay Ports."
::= { cwfSignalingMIBGroups 4 }
END
Reference in New Issue View Git Blame Copy Permalink