mirror of
https://github.com/hsnodgrass/snmp_mib_archive.git
synced 2025-04-17 16:03:04 +00:00
718 lines
25 KiB
Plaintext
718 lines
25 KiB
Plaintext
-- *****************************************************************
|
|
-- CISCO-VOICE-ATM-DIAL-CONTROL-MIB.my: Voice ATM Dial Control MIB
|
|
-- file
|
|
--
|
|
-- April 1998, Steve Yang
|
|
-- Updated May 1999 Chris White
|
|
--
|
|
-- Copyright (c) 1998-2001, 2002 by cisco Systems, Inc.
|
|
-- All rights reserved.
|
|
-- *****************************************************************
|
|
|
|
CISCO-VOICE-ATM-DIAL-CONTROL-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY,
|
|
OBJECT-TYPE
|
|
FROM SNMPv2-SMI
|
|
TEXTUAL-CONVENTION,
|
|
DisplayString,
|
|
TruthValue
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE,
|
|
OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
CvcSpeechCoderRate,
|
|
CvcFaxTransmitRate,
|
|
CvcGUid,
|
|
CvcInBandSignaling
|
|
FROM CISCO-VOICE-COMMON-DIAL-CONTROL-MIB
|
|
callActiveSetupTime,
|
|
callActiveIndex
|
|
FROM DIAL-CONTROL-MIB
|
|
cCallHistoryIndex
|
|
FROM CISCO-DIAL-CONTROL-MIB
|
|
ifIndex
|
|
FROM IF-MIB
|
|
ciscoExperiment
|
|
FROM CISCO-SMI;
|
|
|
|
ciscoVoiceAtmDialControlMIB MODULE-IDENTITY
|
|
LAST-UPDATED "200211170000Z"
|
|
ORGANIZATION "Cisco Systems, Inc."
|
|
CONTACT-INFO
|
|
" Cisco Systems
|
|
Customer Service
|
|
|
|
Postal: 170 W. Tasman Drive
|
|
San Jose, CA 95134
|
|
USA
|
|
|
|
Tel: +1 800 553-NETS
|
|
|
|
E-mail: cs-voice@cisco.com"
|
|
DESCRIPTION
|
|
"This MIB module enhances the IETF Dial Control MIB
|
|
(RFC2128) by providing ATM management information over a
|
|
data network."
|
|
REVISION "200211170000Z"
|
|
DESCRIPTION
|
|
"Modify the following objects:
|
|
[1] Add a new enum definition in CvAtmSessionProtocol
|
|
[2] Change the default value in
|
|
cvAtmPeerCfgInBandSignaling
|
|
"
|
|
REVISION "9903200000Z"
|
|
DESCRIPTION
|
|
"Add new objects for handling the following:
|
|
[1] Call History object ids 6-17 to bring MIB inline with
|
|
stored Call History record.
|
|
[2] Added Call Active Entry objects
|
|
[3] Added Dialpeer Objects for VoATM "
|
|
::= { ciscoExperiment 35 }
|
|
|
|
-- Voice ATM Dial Control MIB objects definitions
|
|
|
|
ciscoVoiceAtmDialControlMIBObjects OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIB 1 }
|
|
|
|
-- The Voice Dial Control MIB consists of the following groups
|
|
-- [1] Voice ATM Dial Control Call History Group (cvAtmCallHistory)
|
|
-- [2] Voice ATM Dial Control Call Active Group (cvAtmCallActive)
|
|
-- [3] Voice ATM Dial Control Dialpeer Group (cvAtmDialPeer)
|
|
|
|
cvAtmCallHistory OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIBObjects 1 }
|
|
cvAtmCallActive OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIBObjects 2 }
|
|
cvAtmDialPeer OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIBObjects 3 }
|
|
|
|
--
|
|
-- Textual Conventions
|
|
--
|
|
|
|
--
|
|
-- Session Protocol textual convention
|
|
--
|
|
CvAtmSessionProtocol ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Represents a Session Protocol used by Voice calls between a
|
|
local and remote router via the ATM backbone.
|
|
|
|
other - none of the following.
|
|
ciscoSwitched - cisco proprietary ATM session protocol.
|
|
"
|
|
SYNTAX INTEGER {
|
|
other (1),
|
|
ciscoSwitched (2),
|
|
aal2Trunk (3)
|
|
}
|
|
|
|
|
|
--**********************************************************************
|
|
-- Voice over ATM Dial Control Call History Group
|
|
--**********************************************************************
|
|
|
|
--
|
|
-- Voice over ATM Call History Table
|
|
--
|
|
|
|
cvAtmCallHistoryTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CvAtmCallHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is the ATM extension to the call history
|
|
table of IETF Dial Control MIB. It contains ATM call
|
|
leg information about specific voice over ATM call."
|
|
::= { cvAtmCallHistory 1 }
|
|
|
|
cvAtmCallHistoryEntry OBJECT-TYPE
|
|
SYNTAX CvAtmCallHistoryEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single ATM call leg.
|
|
An entry of this table is created when its associated call
|
|
history entry in the IETF Dial Control MIB is created and
|
|
the call history entry contains information for the call
|
|
establishment to the peer on the data network backbone via
|
|
a voice over ATM peer.
|
|
Th the IETF Dial Control MIB is deleted."
|
|
INDEX { cCallHistoryIndex }
|
|
::= { cvAtmCallHistoryTable 1 }
|
|
|
|
|
|
CvAtmCallHistoryEntry ::=
|
|
SEQUENCE {
|
|
cvAtmCallHistoryConnectionId CvcGUid,
|
|
cvAtmCallHistoryVpi INTEGER,
|
|
cvAtmCallHistoryVci INTEGER,
|
|
cvAtmCallHistoryLowerIfName DisplayString,
|
|
cvAtmCallHistorySessionTarget DisplayString,
|
|
cvAtmCallHistorySubchannelID INTEGER,
|
|
cvAtmCallHistorySessionProtocol CvAtmSessionProtocol,
|
|
cvAtmCallHistoryCalledNumber DisplayString,
|
|
cvAtmCallHistoryDtmfRelay TruthValue,
|
|
cvAtmCallHistoryUseSeqNumbers TruthValue
|
|
}
|
|
|
|
cvAtmCallHistoryConnectionId OBJECT-TYPE
|
|
SYNTAX CvcGUid
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global call identifier for the ATM call."
|
|
::= { cvAtmCallHistoryEntry 1 }
|
|
|
|
cvAtmCallHistoryVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPI used for this ATM connection."
|
|
::= { cvAtmCallHistoryEntry 2 }
|
|
|
|
cvAtmCallHistoryVci OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VCI used for this ATM connection."
|
|
::= { cvAtmCallHistoryEntry 3 }
|
|
|
|
cvAtmCallHistoryLowerIfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifName of the ATM interface associated with this
|
|
call."
|
|
::= { cvAtmCallHistoryEntry 4 }
|
|
|
|
cvAtmCallHistorySessionTarget OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the session target of the peer that
|
|
was used for the voice over ATM call. A zero length string
|
|
indicates that the value is unavailable."
|
|
::= { cvAtmCallHistoryEntry 5 }
|
|
|
|
cvAtmCallHistorySubchannelID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subchannel used for this ATM connection."
|
|
::= { cvAtmCallHistoryEntry 6 }
|
|
|
|
cvAtmCallHistorySessionProtocol OBJECT-TYPE
|
|
SYNTAX CvAtmSessionProtocol
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the session protocol used on this call."
|
|
::= { cvAtmCallHistoryEntry 7 }
|
|
|
|
cvAtmCallHistoryCalledNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the called party number for trunk connection
|
|
calls. A zero length string indicates that this data is
|
|
unavailable."
|
|
::= { cvAtmCallHistoryEntry 8 }
|
|
|
|
cvAtmCallHistoryDtmfRelay OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if Dtmf Relay was enabled for the call."
|
|
::= { cvAtmCallHistoryEntry 9 }
|
|
|
|
cvAtmCallHistoryUseSeqNumbers OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if Sequence Numbers were used on the voice
|
|
data packets."
|
|
::= { cvAtmCallHistoryEntry 10 }
|
|
|
|
--**********************************************************************
|
|
-- Voice over ATM Dial Control Call Active Group
|
|
--**********************************************************************
|
|
|
|
--
|
|
-- Voice over ATM Call Active Table
|
|
--
|
|
|
|
cvAtmCallActiveTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CvAtmCallActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table is the ATM extension to the active call
|
|
table of IETF Dial Control MIB. It contains ATM call
|
|
leg information about specific voice over ATM call."
|
|
::= { cvAtmCallActive 1 }
|
|
|
|
cvAtmCallActiveEntry OBJECT-TYPE
|
|
SYNTAX CvAtmCallActiveEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The information regarding a single ATM call leg.
|
|
An entry of this table is created when its associated call
|
|
active entry in the IETF Dial Control MIB is created. The
|
|
call active entry contains information for the call
|
|
establishment to the peer on the data network backbone via
|
|
a voice over ATM peer.
|
|
The entry is deleted when its associated call active entry
|
|
in the IETF Dial Control MIB is deleted."
|
|
INDEX { callActiveSetupTime, callActiveIndex }
|
|
::= { cvAtmCallActiveTable 1 }
|
|
|
|
|
|
CvAtmCallActiveEntry ::=
|
|
SEQUENCE {
|
|
cvAtmCallActiveConnectionId CvcGUid,
|
|
cvAtmCallActiveVpi INTEGER,
|
|
cvAtmCallActiveVci INTEGER,
|
|
cvAtmCallActiveLowerIfName DisplayString,
|
|
cvAtmCallActiveSessionTarget DisplayString,
|
|
cvAtmCallActiveSubchannelID INTEGER,
|
|
cvAtmCallActiveSessionProtocol CvAtmSessionProtocol,
|
|
cvAtmCallActiveCalledNumber DisplayString,
|
|
cvAtmCallActiveDtmfRelay TruthValue,
|
|
cvAtmCallActiveUseSeqNumbers TruthValue
|
|
}
|
|
|
|
cvAtmCallActiveConnectionId OBJECT-TYPE
|
|
SYNTAX CvcGUid
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The global call identifier for the ATM call."
|
|
::= { cvAtmCallActiveEntry 1 }
|
|
|
|
cvAtmCallActiveVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPI used for this ATM connection."
|
|
::= { cvAtmCallActiveEntry 2 }
|
|
|
|
cvAtmCallActiveVci OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VCI used for this ATM connection."
|
|
::= { cvAtmCallActiveEntry 3 }
|
|
|
|
cvAtmCallActiveLowerIfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ifName of the ATM interface associated with this
|
|
call."
|
|
::= { cvAtmCallActiveEntry 4 }
|
|
|
|
cvAtmCallActiveSessionTarget OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object indicates the session target of the peer
|
|
that is used for the voice over ATM call. A null string
|
|
indicates that the value is unavailable."
|
|
::= { cvAtmCallActiveEntry 5 }
|
|
|
|
cvAtmCallActiveSubchannelID OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subchannel used for this ATM connection."
|
|
::= { cvAtmCallActiveEntry 6 }
|
|
|
|
cvAtmCallActiveSessionProtocol OBJECT-TYPE
|
|
SYNTAX CvAtmSessionProtocol
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the session protocol being used on this call."
|
|
::= { cvAtmCallActiveEntry 7 }
|
|
|
|
cvAtmCallActiveCalledNumber OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates the called party number for trunk connection
|
|
calls. A null string indicates that this data is
|
|
unavailable."
|
|
::= { cvAtmCallActiveEntry 8 }
|
|
|
|
cvAtmCallActiveDtmfRelay OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if Dtmf Relay is enabled for the call."
|
|
::= { cvAtmCallActiveEntry 9 }
|
|
|
|
cvAtmCallActiveUseSeqNumbers OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if Sequence Numbers are used on the voice data
|
|
packets."
|
|
::= { cvAtmCallActiveEntry 10 }
|
|
|
|
--*********************************************************************
|
|
-- Voice over ATM specific Peer Configuration Table
|
|
--*********************************************************************
|
|
|
|
cvAtmPeerCfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF CvATMPeerCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The table contains the Voice over ATM (ATM) peer specific
|
|
information that is required to accept or place voice calls
|
|
via the ATM backbone with the session protocol specified
|
|
in cvAtmPeerCfgSessionProtocol."
|
|
::= { cvAtmDialPeer 1 }
|
|
|
|
cvAtmPeerCfgEntry OBJECT-TYPE
|
|
SYNTAX CvATMPeerCfgEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A single ATM specific Peer. One entry per ATM
|
|
encapsulation. The entry is created when its associated
|
|
'voiceOverATM(152)' encapsulation ifEntry is created.
|
|
This entry is deleted when its associated ifEntry
|
|
is deleted."
|
|
INDEX { ifIndex }
|
|
::= { cvAtmPeerCfgTable 1 }
|
|
|
|
CvATMPeerCfgEntry ::= SEQUENCE {
|
|
cvAtmPeerCfgSessionProtocol CvAtmSessionProtocol,
|
|
cvAtmPeerCfgInterfaceName DisplayString,
|
|
cvAtmPeerCfgVpi INTEGER,
|
|
cvAtmPeerCfgVci INTEGER,
|
|
cvAtmPeerCfgVcName DisplayString,
|
|
cvAtmPeerCfgCoderRate CvcSpeechCoderRate,
|
|
cvAtmPeerCfgCodecBytes INTEGER,
|
|
cvAtmPeerCfgFaxRate CvcFaxTransmitRate,
|
|
cvAtmPeerCfgFaxBytes INTEGER,
|
|
cvAtmPeerCfgInBandSignaling CvcInBandSignaling,
|
|
cvAtmPeerCfgVADEnable TruthValue,
|
|
cvAtmPeerCfgUseSeqNumbers TruthValue,
|
|
cvAtmPeerCfgDtmfRelay TruthValue
|
|
}
|
|
|
|
cvAtmPeerCfgSessionProtocol OBJECT-TYPE
|
|
SYNTAX CvAtmSessionProtocol
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the session protocol to be used
|
|
for Internet call between local and remote router via
|
|
ATM backbone."
|
|
DEFVAL { ciscoSwitched }
|
|
::= { cvAtmPeerCfgEntry 1 }
|
|
|
|
cvAtmPeerCfgInterfaceName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The object specifies the ifName on which the call will go
|
|
out.
|
|
A zero length string indicates that no interface has been
|
|
assigned."
|
|
|
|
DEFVAL { "" }
|
|
::= { cvAtmPeerCfgEntry 2 }
|
|
|
|
cvAtmPeerCfgVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..4095)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VPI used for this ATM connection."
|
|
DEFVAL { 0 }
|
|
::= { cvAtmPeerCfgEntry 3 }
|
|
|
|
cvAtmPeerCfgVci OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VCI used for this ATM connection."
|
|
DEFVAL { 0 }
|
|
::= { cvAtmPeerCfgEntry 4 }
|
|
|
|
cvAtmPeerCfgVcName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The VC Name used for this ATM connection."
|
|
DEFVAL { "" }
|
|
::= { cvAtmPeerCfgEntry 5 }
|
|
|
|
cvAtmPeerCfgCoderRate OBJECT-TYPE
|
|
SYNTAX CvcSpeechCoderRate
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the default voice coder rate of
|
|
speech for the ATM peer."
|
|
DEFVAL { g729Ar8000 }
|
|
::= { cvAtmPeerCfgEntry 6 }
|
|
|
|
cvAtmPeerCfgCodecBytes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the payload size for the voice
|
|
packets to be transmitted during the call."
|
|
DEFVAL { 30 }
|
|
::= { cvAtmPeerCfgEntry 7 }
|
|
|
|
cvAtmPeerCfgFaxRate OBJECT-TYPE
|
|
SYNTAX CvcFaxTransmitRate
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the default transmit rate of FAX
|
|
for the ATM peer. If the value of this object is 'none',
|
|
then the Fax relay feature is disabled; otherwise the
|
|
Fax relay feature is enabled."
|
|
DEFVAL { voiceRate }
|
|
::= { cvAtmPeerCfgEntry 8 }
|
|
|
|
cvAtmPeerCfgFaxBytes OBJECT-TYPE
|
|
SYNTAX INTEGER (0..240)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the payload size for the fax
|
|
packets to be transmitted during the call."
|
|
DEFVAL { 30 }
|
|
::= { cvAtmPeerCfgEntry 9 }
|
|
|
|
cvAtmPeerCfgInBandSignaling OBJECT-TYPE
|
|
SYNTAX CvcInBandSignaling
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies the type of in-band signaling
|
|
used between the two end points of the call and is used
|
|
by the router to determine how to interpret the ABCD
|
|
signaling bits sent as part of the voice payload data."
|
|
DEFVAL { cas }
|
|
::= { cvAtmPeerCfgEntry 10 }
|
|
|
|
cvAtmPeerCfgVADEnable OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether or not VAD (Voice Activity
|
|
Detection) is enabled. If the object value is 'false',
|
|
then the voice data is continuously transmitted to
|
|
ATM backbone."
|
|
DEFVAL { true }
|
|
::= { cvAtmPeerCfgEntry 11 }
|
|
|
|
cvAtmPeerCfgUseSeqNumbers OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether or not Sequence Numbers are
|
|
generated on voice packets."
|
|
DEFVAL { false }
|
|
::= { cvAtmPeerCfgEntry 12 }
|
|
|
|
cvAtmPeerCfgDtmfRelay OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object specifies whether or not Dtmf Relay is enabled.
|
|
If it is then dtmf digits are transported as FRF11 Annex
|
|
C packets, instead of being encoded as speech."
|
|
DEFVAL { false }
|
|
::= { cvAtmPeerCfgEntry 13 }
|
|
|
|
--
|
|
-- Notifications
|
|
--
|
|
|
|
ciscoVoiceAtmDialControlMIBNotificationPrefix OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIB 2 }
|
|
ciscoVoiceAtmDialControlMIBNotifications OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIBNotificationPrefix 0 }
|
|
|
|
--
|
|
-- Conformancy, Compliance and Group Objects
|
|
--
|
|
|
|
ciscoVoiceAtmDialControlMIBConformance OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIB 3 }
|
|
ciscoVoiceAtmDialControlMIBCompliances OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIBConformance 1 }
|
|
ciscoVoiceAtmDialControlMIBGroups OBJECT IDENTIFIER ::=
|
|
{ ciscoVoiceAtmDialControlMIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
ciscoVoiceAtmDialControlMIBCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for entities which
|
|
implement the CISCO VOICE ATM DIAL CONTROL MIB"
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS
|
|
{ cvAtmCallHistoryGroup,
|
|
cvAtmCallActiveGroup,
|
|
cvAtmPeerCfgGroup }
|
|
OBJECT cvAtmPeerCfgSessionProtocol
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgInterfaceName
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgVpi
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgVci
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgVcName
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgCoderRate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgCodecBytes
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgFaxRate
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgFaxBytes
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgInBandSignaling
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgVADEnable
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgUseSeqNumbers
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
OBJECT cvAtmPeerCfgDtmfRelay
|
|
MIN-ACCESS read-only
|
|
DESCRIPTION
|
|
"Agent implements read-only access at present time"
|
|
::= { ciscoVoiceAtmDialControlMIBCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
cvAtmCallHistoryGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cvAtmCallHistoryConnectionId,
|
|
cvAtmCallHistoryVpi,
|
|
cvAtmCallHistoryVci,
|
|
cvAtmCallHistoryLowerIfName,
|
|
cvAtmCallHistorySessionTarget,
|
|
cvAtmCallHistorySubchannelID,
|
|
cvAtmCallHistorySessionProtocol,
|
|
cvAtmCallHistoryCalledNumber,
|
|
cvAtmCallHistoryDtmfRelay,
|
|
cvAtmCallHistoryUseSeqNumbers
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the ATM Call History
|
|
entry capability."
|
|
::= { ciscoVoiceAtmDialControlMIBGroups 1 }
|
|
|
|
cvAtmCallActiveGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cvAtmCallActiveConnectionId,
|
|
cvAtmCallActiveVpi,
|
|
cvAtmCallActiveVci,
|
|
cvAtmCallActiveLowerIfName,
|
|
cvAtmCallActiveSessionTarget,
|
|
cvAtmCallActiveSubchannelID,
|
|
cvAtmCallActiveSessionProtocol,
|
|
cvAtmCallActiveCalledNumber,
|
|
cvAtmCallActiveDtmfRelay,
|
|
cvAtmCallActiveUseSeqNumbers
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the ATM Call Active
|
|
entry capability."
|
|
::= { ciscoVoiceAtmDialControlMIBGroups 2 }
|
|
|
|
cvAtmPeerCfgGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
cvAtmPeerCfgSessionProtocol,
|
|
cvAtmPeerCfgInterfaceName,
|
|
cvAtmPeerCfgVpi,
|
|
cvAtmPeerCfgVci,
|
|
cvAtmPeerCfgVcName,
|
|
cvAtmPeerCfgCoderRate,
|
|
cvAtmPeerCfgCodecBytes,
|
|
cvAtmPeerCfgFaxRate,
|
|
cvAtmPeerCfgFaxBytes,
|
|
cvAtmPeerCfgInBandSignaling,
|
|
cvAtmPeerCfgVADEnable,
|
|
cvAtmPeerCfgUseSeqNumbers,
|
|
cvAtmPeerCfgDtmfRelay
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects providing the ATM Dialpeer
|
|
capability. These objects have been implemented as
|
|
read-only."
|
|
::= { ciscoVoiceAtmDialControlMIBGroups 3 }
|
|
END
|
|
|
|
|
|
|
|
|