snmp_mib_archive/CISCO-VIRTUAL-INTERFACE-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

474 lines
16 KiB
Plaintext

-- *********************************************************************
-- CISCO-VIRTUAL-INTERFACE-MIB.my: Virtual Interface mib
--
-- January 2008, Pauline Shuen
--
-- Copyright (c) 2008 by cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-VIRTUAL-INTERFACE-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus,
TimeStamp,
TruthValue
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InterfaceIndex,
InterfaceIndexOrZero
FROM IF-MIB
IANAifType
FROM IANAifType-MIB
PortMemberList
FROM CISCO-ST-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoVirtualInterfaceMIB MODULE-IDENTITY
LAST-UPDATED "200802270000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-nexus5000@cisco.com"
DESCRIPTION
"The MIB module for creation and deletion of Virtual Interfaces
and Virtual Interface Groups. In addition to this MIB,
interface mib (rfc2863) will also contain entries for virtual
interfaces.
There are two ways virtual interfaces can be created and bound
to an interface. The MIB Object cvifGroupsSupported indicates
if a particular system supports the Virtual Interface Group
concept.
If Virtual Interface Groups are supported, then a virtual
interface is always created/deleted in conjunction with its
associated Virtual Interface Group. The Virtual Interface
Group, which may be associated to multiple virtual interfaces,
is then bound to a physical interface or another virtual
interface like an EtherChannel.
If Virtual Interface Groups are not supported, then a virtual
interface is created/deleted independently. And each virtual
interface is bound to a physical interface or another virtual
interface like an EtherChannel.
In order for a virtual interface to become operational, it must
be directly or indirectly (via its Virtual Interface Group)
bound to a physical interface or possibly to another virtual
interface such as an EtherChannel.
The cvifGroupTable is only used if the MIB object
cvifGroupsSupported indicates Virtual Interface Groups are
supported."
REVISION "200802270000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 648 }
ciscoVirtualInterfaceMIBObjects OBJECT IDENTIFIER
::= { ciscoVirtualInterfaceMIB 1 }
ciscoVirtualInterfaceMIBConformance OBJECT IDENTIFIER
::= { ciscoVirtualInterfaceMIB 2 }
cvifGlobals OBJECT IDENTIFIER
::= { ciscoVirtualInterfaceMIBObjects 1 }
cvifConfig OBJECT IDENTIFIER
::= { ciscoVirtualInterfaceMIBObjects 2 }
-- Virtual Interface Globals
cvifGroupsSupported OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a boolean that indicates whether Virtual Interface
Groups are supported (and enabled). Note that many agents are
unlikely to support write-access for this object. If there are
entries in the cvifGroupTable when this value is being set to
false, the set will fail."
::= { cvifGlobals 1 }
-- Virtual Interface Group Table
cvifGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvifGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table facilitates the creation and deletion of a Virtual
Interface Group. Entries in this table exist only if
cvifGroupsSupported is 'true'. A Virtual Interface Group is a
collection of virtual interfaces on an adapter in a server. The
virtual interfaces within a Virtual Interface Group do not need
to all have the same ifType."
::= { cvifConfig 1 }
cvifGroupEntry OBJECT-TYPE
SYNTAX CvifGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created
Virtual Interface Group."
INDEX { cvifGroupIndex }
::= { cvifGroupTable 1 }
CvifGroupEntry ::= SEQUENCE {
cvifGroupIndex Unsigned32,
cvifGroupIfIndex InterfaceIndex,
cvifGroupBindingIfIndex InterfaceIndexOrZero,
cvifGroupMemberList PortMemberList,
cvifGroupCreationTime TimeStamp,
cvifGroupFailureCause SnmpAdminString,
cvifGroupOperState INTEGER ,
cvifGroupRowStatus RowStatus
}
cvifGroupIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1024 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An index that uniquely identifies an entry in the
cvifGroupTable table."
::= { cvifGroupEntry 1 }
cvifGroupIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of this Virtual Interface Group."
::= { cvifGroupEntry 2 }
cvifGroupBindingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The ifIndex of the physical interface or another virtual
interface like an Etherchannel bound to this Virtual Interface
Group. The binding can happen at Virtual Interface Group
creation time or at a later time. In order for Virtual Interface
Group to become operational, binding to a physical interface or
a virtual interface like an Etherchannel is mandatory. When the
virtual interface group is not bound to an interface, this field
has a value of zero."
::= { cvifGroupEntry 3 }
cvifGroupMemberList OBJECT-TYPE
SYNTAX PortMemberList
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The list of Virtual interfaces in the Virtual Interface Group."
DEFVAL { ''H }
::= { cvifGroupEntry 4 }
cvifGroupCreationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of this entry's creation time."
::= { cvifGroupEntry 5 }
cvifGroupFailureCause OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The cause of failure for the last bind operation. This object
will be zero length if and only if the bind is successful. After
a successful bind operation, the value of cvifGroupOperState is
set to 'up'."
::= { cvifGroupEntry 6 }
cvifGroupOperState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state of the Virtual Interface Group."
::= { cvifGroupEntry 7 }
cvifGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. The RowStatus becomes active
on successful creation of a Virtual Interface Group. It is not
necessary for the cvifGroupBindingIfIndex to be set at the time
of creation."
::= { cvifGroupEntry 8 }
-- Virtual Interface Table
cvifTable OBJECT-TYPE
SYNTAX SEQUENCE OF CvifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table facilitates the creation and deletion of virtual
interfaces. Virtual interfaces may or may not be associated
with a Virtual Interface Group according to the value of
cvifGroupsSupported. In order for a virtual interface to become
operational, it must be directly bound to a physical interface
or another virtual interface like an EtherChannel or indirectly
bound via its Virtual Interface Group. At creation time, the
cvifType must be identified."
::= { cvifConfig 2 }
cvifEntry OBJECT-TYPE
SYNTAX CvifEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"There is one entry in this table for each created virtual
Interface"
INDEX {
cvifIndex,
cvifType
}
::= { cvifTable 1 }
CvifEntry ::= SEQUENCE {
cvifIndex Unsigned32,
cvifType IANAifType,
cvifIfIndex InterfaceIndex,
cvifCreationTime TimeStamp,
cvifBindingIfIndex InterfaceIndexOrZero,
cvifFailureCause SnmpAdminString,
cvifRowStatus RowStatus
}
cvifIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..1024 )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When Virtual Interface Groups (as indicated by the
cvifGroupsSupported MIB object) are supported, this is the
Virtual Interface Group index. Otherwise, this index identifies
the virtual interface."
::= { cvifEntry 1 }
cvifType OBJECT-TYPE
SYNTAX IANAifType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of virtual interface desired by the network manager.
If and when a row is created in this table by using a SetRequest
to cvifRowStatus, the corresponding ifTable row will be created
by the agent with its ifType as specified by this object.
Note that agents are unlikely to support more than a few values
for this object, e.g., 'ethernetCsmacd(6)' and
'fibreChannel(56)'."
::= { cvifEntry 2 }
cvifIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ifIndex of this virtual interface."
::= { cvifEntry 3 }
cvifCreationTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The timestamp of this entry's creation time."
::= { cvifEntry 4 }
cvifBindingIfIndex OBJECT-TYPE
SYNTAX InterfaceIndexOrZero
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This field is supported only when Virtual Interface Groups are
not supported, as indicated by the cvifGroupsSupported MIB
object. It identifies the ifIndex of the interface that this
virtual interface is bound to. In order for a virtual interface
to become operational, in the absence of Virtual Interface
Groups, binding to an interface is mandatory. When the virtual
interface is not bound to an interface, this field has a
value of zero."
::= { cvifEntry 5 }
cvifFailureCause OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This field is supported only when Virtual Interface Groups are
not supported, as indicated by the cvifGroupsSupported MIB
object. The cause of failure for the last bind operation. This
object will be zero length if and only if the bind is
successful."
::= { cvifEntry 6 }
cvifRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row. The RowStatus becomes active
on successful creation of a virtual interface. If Virtual
Interface Groups are not supported, as indicated by the
cvifGroupsSupported MIB object, the virtual interface must be
bound to a physical interface or another virtual interface like
an Etherchannel before it can become operational."
::= { cvifEntry 7 }
-- Conformance
cvifMIBCompliances OBJECT IDENTIFIER
::= { ciscoVirtualInterfaceMIBConformance 1 }
cvifMIBGroups OBJECT IDENTIFIER
::= { ciscoVirtualInterfaceMIBConformance 2 }
cvifGroupMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-VIRTUAL-INTERFACE-MIB mib, with support for Virtual
Interface Groups, as indicated by the cvifGroupsSupported MIB
object."
MODULE -- this module
MANDATORY-GROUPS {
cvifGroupConformanceObjects,
cvifCommonConformanceObjects
}
OBJECT cvifGroupsSupported
MIN-ACCESS read-only
DESCRIPTION
"Support for write access is not required."
OBJECT cvifGroupBindingIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Support for write access is not required."
OBJECT cvifGroupRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Support for write access is not required."
OBJECT cvifRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Support for write access is not required."
::= { cvifMIBCompliances 1 }
cvifMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-VIRTUAL-INTERFACE-MIB mib, without support for Virtual
Interface Groups, as indicated by the cvifGroupsSupported MIB
object."
MODULE -- this module
MANDATORY-GROUPS {
cvifPhysicalConformanceObjects,
cvifCommonConformanceObjects
}
OBJECT cvifGroupsSupported
MIN-ACCESS read-only
DESCRIPTION
"Support for write access is not required."
OBJECT cvifBindingIfIndex
MIN-ACCESS read-only
DESCRIPTION
"Support for write access is not required."
OBJECT cvifRowStatus
MIN-ACCESS read-only
DESCRIPTION
"Support for write access is not required."
::= { cvifMIBCompliances 2 }
-- Units of Conformance
cvifGroupConformanceObjects OBJECT-GROUP
OBJECTS {
cvifGroupIfIndex,
cvifGroupBindingIfIndex,
cvifGroupMemberList,
cvifGroupCreationTime,
cvifGroupFailureCause,
cvifGroupOperState,
cvifGroupRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects related to implementation of
virtual interfaces bound to Virtual Interface Groups."
::= { cvifMIBGroups 1 }
cvifCommonConformanceObjects OBJECT-GROUP
OBJECTS {
cvifGroupsSupported,
cvifIfIndex,
cvifCreationTime,
cvifRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects related to all implementations
of virtual interfaces."
::= { cvifMIBGroups 2 }
cvifPhysicalConformanceObjects OBJECT-GROUP
OBJECTS {
cvifBindingIfIndex,
cvifFailureCause
}
STATUS current
DESCRIPTION
"A collection of objects related to implementation of
virtual interfaces bound to physical interfaces."
::= { cvifMIBGroups 3 }
END