MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-SME-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

710 lines
22 KiB
Plaintext
Raw Blame History

-- CISCO-SME-MIB.my: Storage Media Encryption MIB
--
-- Jan 2008, Anand Parthasarathy and Arpakorn Boonkongchuen
--
-- Copyright (c) 2007-2008 by Cisco Systems Inc.
-- All rights reserved.
--
-- ********************************************************************
CISCO-SME-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TEXTUAL-CONVENTION,
TruthValue,
TimeStamp,
RowStatus,
StorageType
FROM SNMPv2-TC
InterfaceIndex,
ifDescr
FROM IF-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
FcNameId
FROM CISCO-ST-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoSmeMIB MODULE-IDENTITY
LAST-UPDATED "200803280000Z"
ORGANIZATION "Cisco Systems Inc. "
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"MIB module to manage Storage Media Encryption (SME) service.
SME is an encryption service provided by an encryption node
residing on a linecard in a storage device. It receives
clear-text data from host, encrypts it, then sends it to be
written to tape or disk. It does the reverse in the opposite
direction so the service is completely transparent to the
host. The purpose of this service is to enhance data security
in case the tape or disk is lost or stolen.
As with any important service, user requires that it provides
some level of fault tolerant in a graceful manner.
SME provides this by allowing encryption nodes to be grouped
into cluster. Nodes in the same cluster immediately pick up
the work of a failed node so user does not see service
disruption."
REVISION "200803280000Z"
DESCRIPTION
"Initial version"
::= { ciscoMgmt 632 }
ciscoSmeMIBNotifs OBJECT IDENTIFIER
::= { ciscoSmeMIB 0 }
ciscoSmeMIBObjects OBJECT IDENTIFIER
::= { ciscoSmeMIB 1 }
ciscoSmeMIBConform OBJECT IDENTIFIER
::= { ciscoSmeMIB 2 }
cSmeConfig OBJECT IDENTIFIER
::= { ciscoSmeMIBObjects 1 }
-- Textual Conventions
CiscoSmeInterfaceStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operational state of the SME interface.
'unknown(1)' -- interface is in an unknown state
'initializing(2)' -- interface is being initialized
'offline(3)' -- interface is not active
'online(4)' -- interface is online and can be used"
SYNTAX INTEGER {
unknown(1),
initializing(2),
offline(3),
online(4)
}
CiscoSmeClusterStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Operational state of the SME cluster
'unknown(1)' -- cluster is in an unknown state
'inactive(2)' -- cluster is not active
'degraded(3)' -- cluster has lost some of its members
'recovery(4)' -- cluster is recovering from membership lost
'active(5)' -- cluster is active"
SYNTAX INTEGER {
unknown(1),
inactive(2),
degraded(3),
recovery(4),
active(5)
}
CiscoSmeClusterIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This denotes the globally unique index for a SME
cluster. The value of the CiscoSmeClusterIndex is
a thirty-two-octet unsigned integer value encoded in
a network-byte order."
SYNTAX OCTET STRING (SIZE (32))
-- SME Configuration Group
--
-- SME Cluster Table
cSmeClusterTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSmeClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all the SME clusters that are configured
on this device. As with any important service, user requires
that it provides some level of fault tolerant in a graceful
manner. SME provides this by allowing encryption nodes to be
grouped into cluster. Nodes in the same cluster immediately
pick up the work of a failed node so user does not see
service disruption."
::= { cSmeConfig 1 }
cSmeClusterEntry OBJECT-TYPE
SYNTAX CSmeClusterEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cSmeClusterTable. Each
row represents a SME cluster in the system and
provides the runtime and configuration information
of a cluster."
INDEX { cSmeClusterId }
::= { cSmeClusterTable 1 }
CSmeClusterEntry ::= SEQUENCE {
cSmeClusterId CiscoSmeClusterIndex,
cSmeClusterName SnmpAdminString,
cSmeClusterState CiscoSmeClusterStatus,
cSmeClusterMasterInetAddrType InetAddressType,
cSmeClusterMasterInetAddr InetAddress,
cSmeClusterStorageType StorageType,
cSmeClusterRowStatus RowStatus
}
cSmeClusterId OBJECT-TYPE
SYNTAX CiscoSmeClusterIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Globally unique index that identifies a SME cluster.
This index must be generated in such a way that the
same value is never reused even after cluster has been
deleted."
::= { cSmeClusterEntry 1 }
cSmeClusterName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The name of the SME cluster."
DEFVAL { "" }
::= { cSmeClusterEntry 2 }
cSmeClusterState OBJECT-TYPE
SYNTAX CiscoSmeClusterStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of the SME cluster."
::= { cSmeClusterEntry 3 }
cSmeClusterMasterInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of Internet address of the SME cluster
master. The Internet address of SME cluster master is
specified by the value of the corresponding instance
of cSmeClusterMasterInetAddr."
::= { cSmeClusterEntry 4 }
cSmeClusterMasterInetAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Internet address of the SME cluster master
device. The type of this Internet address is
determined by the value of the corresponding
instance of cSmeClusterMasterInetAddrType."
::= { cSmeClusterEntry 5 }
cSmeClusterStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type for this conceptual
row."
::= { cSmeClusterEntry 6 }
cSmeClusterRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
There is no restriction on the value of other columns
before a newly created row can be made active."
::= { cSmeClusterEntry 7 }
-- SME Cluster Member Switch Table
cSmeClusterMembersTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSmeClusterMembersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the information of devices, local or
remote, which are members of SME clusters configured on a
device."
::= { cSmeConfig 2 }
cSmeClusterMembersEntry OBJECT-TYPE
SYNTAX CSmeClusterMembersEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cSmeClusterMembersTable.
Each row represents a member device within a
specified SME Cluster."
INDEX {
cSmeClusterId,
cSmeMemberInetAddrType,
cSmeMemberInetAddr
}
::= { cSmeClusterMembersTable 1 }
CSmeClusterMembersEntry ::= SEQUENCE {
cSmeMemberInetAddrType InetAddressType,
cSmeMemberInetAddr InetAddress,
cSmeFabric SnmpAdminString,
cSmeIsMemberLocal TruthValue,
cSmeMemberIsMaster TruthValue,
cSmeClusterMemberStorageType StorageType,
cSmeClusterMemberRowStatus RowStatus
}
cSmeMemberInetAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of Internet address of a cluster member within
a specified SME cluster. The Internet address of this
device is specified by the value of the corresponding
instance of cSmeMemberInetAddr."
::= { cSmeClusterMembersEntry 1 }
cSmeMemberInetAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (0..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Internet address of the cluster member device
within a specified SME cluster.
The type of this Internet address is determined
by the value of the corresponding instance of
cSmeMemberInetAddrType."
::= { cSmeClusterMembersEntry 2 }
cSmeFabric OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Refers to the name of physical fibre channel fabric in the
SAN. A typical SAN deployment consists of a dual fabric
topology which corresponds to two physical fabrics.
In such a deployment, a VSAN and a cluster is configured
in both fabrics to allow multi-pathing and redundancy.
The user specifies the physical fabric to which a device
belongs to when the cluster is configured."
::= { cSmeClusterMembersEntry 3 }
cSmeIsMemberLocal OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Identifies if the device is a local or remote member of
this cluster.
'true' means this device is a local device.
'false' means this device is a remote device."
::= { cSmeClusterMembersEntry 4 }
cSmeMemberIsMaster OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if this device is currently the master of
the SME cluster.
The value 'true' means this device is the master.
The value 'false' means this device is not the master.
Devices in a cluster select one of the cluster member
to be a master. The master is responsible for
handling cluster membership."
::= { cSmeClusterMembersEntry 5 }
cSmeClusterMemberStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type for this conceptual
row."
::= { cSmeClusterMembersEntry 6 }
cSmeClusterMemberRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
There is no restriction on the value of other columns
before a newly created row can be made active.
When a cluster is deleted, all entries in this table
should be purged automatically."
::= { cSmeClusterMembersEntry 7 }
-- SME Cluster Member Interface Table
cSmeClusterMemberIfTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSmeClusterMemberIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the information of SME interfaces on all
devices, local or remote, which are members of SME clusters
configured on a device."
::= { cSmeConfig 3 }
cSmeClusterMemberIfEntry OBJECT-TYPE
SYNTAX CSmeClusterMemberIfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cSmeClusterMemberIfTable.
Each row represents a participating interface on
local/remote device member within the specified
SME cluster."
INDEX {
cSmeClusterId,
cSmeMemberInetAddrType,
cSmeMemberInetAddr,
cSmeClusterInterfaceIndex
}
::= { cSmeClusterMemberIfTable 1 }
CSmeClusterMemberIfEntry ::= SEQUENCE {
cSmeClusterInterfaceIndex InterfaceIndex,
cSmeClusterInterfaceState CiscoSmeInterfaceStatus
}
cSmeClusterInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique Interface index for a SME interface on a device
in this cluster. This is the same as ifIndex of the
ifTable of RFC1213."
::= { cSmeClusterMemberIfEntry 1 }
cSmeClusterInterfaceState OBJECT-TYPE
SYNTAX CiscoSmeInterfaceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operational state of this SME interface."
::= { cSmeClusterMemberIfEntry 2 }
-- SME Local Interface Table
cSmeInterfaceTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSmeInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all SME interfaces on the local device and
its corresponding information."
::= { cSmeConfig 4 }
cSmeInterfaceEntry OBJECT-TYPE
SYNTAX CSmeInterfaceEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cSmeInterfaceTable.
Each row represents a particular SME interface on
a local device."
INDEX { cSmeInterfaceIndex }
::= { cSmeInterfaceTable 1 }
CSmeInterfaceEntry ::= SEQUENCE {
cSmeInterfaceIndex InterfaceIndex,
cSmeInterfaceState CiscoSmeInterfaceStatus,
cSmeInterfaceClusterId CiscoSmeClusterIndex,
cSmeInterfaceStorageType StorageType,
cSmeInterfaceRowStatus RowStatus
}
cSmeInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A unique Interface index for a SME interface on this device.
This is the same as ifIndex of the ifTable of RFC1213."
::= { cSmeInterfaceEntry 1 }
cSmeInterfaceState OBJECT-TYPE
SYNTAX CiscoSmeInterfaceStatus
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Operational state of this SME interface."
::= { cSmeInterfaceEntry 2 }
cSmeInterfaceClusterId OBJECT-TYPE
SYNTAX CiscoSmeClusterIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the cluster to which this SME interface belongs."
::= { cSmeInterfaceEntry 3 }
cSmeInterfaceStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type for this conceptual
row."
::= { cSmeInterfaceEntry 4 }
cSmeInterfaceRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
There is no restriction on the value of other columns
before a newly created row can be made active.
For example, cSmeInterfaceClusterId column can be set
independently later."
::= { cSmeInterfaceEntry 5 }
-- SME Host Port Table
cSmeHostPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF CSmeHostPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the hosts that are configured for
SME. In the case of application servers, the disks
that are accessed by the hosts may be encrypted. In the
case of backup/restore master/media servers, the tapes
accessed by the hosts may be encrypted."
::= { cSmeConfig 5 }
cSmeHostPortEntry OBJECT-TYPE
SYNTAX CSmeHostPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A conceptual row in the cSmeHostPortTable.
Each row represents a particular host configured for
SME service in a particular cluster."
INDEX { cSmeHostPortName }
::= { cSmeHostPortTable 1 }
CSmeHostPortEntry ::= SEQUENCE {
cSmeHostPortName FcNameId,
cSmeHostPortClusterId CiscoSmeClusterIndex,
cSmeHostPortStorageType StorageType,
cSmeHostPortRowStatus RowStatus
}
cSmeHostPortName OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Fibre-channel Port name (P_WWN) of the Host Nx_Port."
::= { cSmeHostPortEntry 1 }
cSmeHostPortClusterId OBJECT-TYPE
SYNTAX CiscoSmeClusterIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Identifies the cluster to which this host port belongs."
::= { cSmeHostPortEntry 2 }
cSmeHostPortStorageType OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the storage type for this conceptual
row."
::= { cSmeHostPortEntry 3 }
cSmeHostPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
There is no restriction on the value of other columns
before a newly created row can be made active."
::= { cSmeHostPortEntry 4 }
-- Time last changed for the agents to know if they have to look at
-- these tables.
cSmeConfigTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when a change to any SME MIB
table other than the cSmeHostPortTable last occurred."
::= { cSmeConfig 6 }
cSmeHostPortTableLastChanged OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime when a change to cSmeHostPortTable
last occurred."
::= { cSmeConfig 7 }
-- Notification control object
cSmeNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the SME notifications
should be generated or not.
If the value of this object is 'true', then
the notifications are generated.
If the value of this object is 'false, then
the notifications are not generated."
DEFVAL { true }
::= { cSmeConfig 8 }
-- Notifications
ciscoSmeInterfaceCreate NOTIFICATION-TYPE
OBJECTS { ifDescr }
STATUS current
DESCRIPTION
"This notification is generated when a SME interface
associated with a local device is created."
::= { ciscoSmeMIBNotifs 1 }
ciscoSmeInterfaceDelete NOTIFICATION-TYPE
OBJECTS { ifDescr }
STATUS current
DESCRIPTION
"This notification is generated when a SME interface
associated with a local device is deleted."
::= { ciscoSmeMIBNotifs 2 }
ciscoSmeClusterNewMaster NOTIFICATION-TYPE
OBJECTS {
cSmeClusterName,
cSmeClusterMasterInetAddrType,
cSmeClusterMasterInetAddr
}
STATUS current
DESCRIPTION
"This notification is generated when the sending device
who is participating in a SME cluster has transitioned
to be the master of the cluster."
::= { ciscoSmeMIBNotifs 3 }
-- Conformance
ciscoSmeMIBCompliances OBJECT IDENTIFIER
::= { ciscoSmeMIBConform 1 }
ciscoSmeMIBGroups OBJECT IDENTIFIER
::= { ciscoSmeMIBConform 2 }
-- Compliance Statements
ciscoSmeMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that implement
SME."
MODULE -- this module
MANDATORY-GROUPS {
ciscoSmeConfigGroup,
ciscoSmeNotifControlGroup,
ciscoSmeNotifsGroup
}
::= { ciscoSmeMIBCompliances 1 }
ciscoSmeConfigGroup OBJECT-GROUP
OBJECTS {
cSmeClusterState,
cSmeClusterMasterInetAddrType,
cSmeClusterMasterInetAddr,
cSmeIsMemberLocal,
cSmeClusterInterfaceState,
cSmeInterfaceState,
cSmeInterfaceClusterId,
cSmeHostPortClusterId,
cSmeConfigTableLastChanged,
cSmeHostPortTableLastChanged,
cSmeFabric,
cSmeClusterName,
cSmeInterfaceRowStatus,
cSmeClusterRowStatus,
cSmeMemberIsMaster,
cSmeClusterMemberRowStatus,
cSmeClusterStorageType,
cSmeClusterMemberStorageType,
cSmeInterfaceStorageType,
cSmeHostPortStorageType,
cSmeHostPortRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for SME configuration."
::= { ciscoSmeMIBGroups 1 }
ciscoSmeNotifControlGroup OBJECT-GROUP
OBJECTS { cSmeNotifyEnable }
STATUS current
DESCRIPTION
"A collection of objects for controlling SME notification."
::= { ciscoSmeMIBGroups 2 }
ciscoSmeNotifsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
ciscoSmeInterfaceCreate,
ciscoSmeInterfaceDelete,
ciscoSmeClusterNewMaster
}
STATUS current
DESCRIPTION
"A collection of objects for notification of SME events."
::= { ciscoSmeMIBGroups 3 }
END
Reference in New Issue View Git Blame Copy Permalink