MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-SCSI-FLOW-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1338 lines
43 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-SCSI-FLOW-MIB.my: SCSI (Small Computer Systems Interface) Flow
-- MIB
--
-- October 2004, H K Vivek, Giri Rajaram
--
-- Copyright (c) 2004 by Cisco Systems, Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-SCSI-FLOW-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Unsigned32,
NOTIFICATION-TYPE,
Counter32,
Counter64,
Gauge32
FROM SNMPv2-SMI
TruthValue,
RowStatus,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
ciscoMgmt
FROM CISCO-SMI
VsanIndex,
FcNameId
FROM CISCO-ST-TC
ScsiLUNOrZero
FROM CISCO-SCSI-MIB;
ciscoScsiFlowMIB MODULE-IDENTITY
LAST-UPDATED "200501060000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
" Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
mail: cs-san@cisco.com"
DESCRIPTION
"A SCSI Flow is described as a SCSI Initiator
SCSI Target combination. This MIB is used to
configure and monitor SCSI Flows.
Glossary of terms used in this MIB:
ABTS - Abort Sequence.
ACA - Acquire Change Authorization.
CFS - Cisco Fabric Service is a general
mechanism to distribute data within
a Storage Area Network.
DPP - Data Path Processor.
ILC - Intelligent Line Card.
LUN - Logical Unit Number is a 64-bit
identifier for a logical unit.
pWWN - port World Wide Name.
nWWN - node World Wide Name.
SCSI Initiator - is a device that contains application
clients and SCSI initiator ports
that originate device service and
task management requests to be
processed by a target SCSI device.
SCSI flow - connection between SCSI initiator and
SCSI target.
SCSI Target - is a device that contains logical units
and SCSI target ports that receive
device service and task management
requests for processing.
SFC - SCSI Flow Client.
SFM - SCSI Flow Manager.
TCAM - Ternary Content Addressable Memory.
VSAN - Virtual Storage Area Network, similar to
a VLAN.
WWN - World Wide Name. Mechanism of identifying
devices in Fibre Channel Networks. It is
8 bytes long."
REVISION "200501060000Z"
DESCRIPTION
"Initial version of this MIB."
::= { ciscoMgmt 447 }
ciscoScsiFlowMIBNotifs OBJECT IDENTIFIER
::= { ciscoScsiFlowMIB 0 }
ciscoScsiFlowMIBObjects OBJECT IDENTIFIER
::= { ciscoScsiFlowMIB 1 }
ciscoScsiFlowMIBConform OBJECT IDENTIFIER
::= { ciscoScsiFlowMIB 2 }
csfConfiguration OBJECT IDENTIFIER
::= { ciscoScsiFlowMIBObjects 1 }
csfStats OBJECT IDENTIFIER
::= { ciscoScsiFlowMIBObjects 2 }
csfFeatureStatus OBJECT IDENTIFIER
::= { ciscoScsiFlowMIBObjects 3 }
-- Textual Conventions
CSFlowDeviceType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the type of SCSI device.
initiator(1) - the device is a SCSI initiator.
target(2) - the device is a SCSI target."
SYNTAX INTEGER {
initiator(1),
target(2)
}
CSFlowVerifyReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the reason codes associated with SCSI flow
verification notifications.
success(1) - successful.
noLicense(2) - there was no license available.
generalError(3) - generic error.
notInNameServer(4) - device was not found in Name Server
database.
notInFlogiServer(5) - device was not found in FLOGI Server
database.
deviceNotOnIlc(6) - device was not on Intelligent Line
card.
deviceNotScsi(7) - device was not SCSI device.
deviceNotInitiator(8) - device was not initiator.
deviceNotTarget(9) - device was not target.
deviceNotFibreChannel(10) - device was not a Fibre Channel
device.
ipcTimeout(11) - internal IPC timeout.
cfsError(12) - Cisco Fabric Service has
reported error.
cfsTimeout(13) - Cisco Fabric Service has timed
out.
portsUnprovisioned(14) - ports have not been
provisioned.
initTargetZonedOut(15) - Initiator and target have
been zoned out.
statusNotChecked(16) - The device status has not been
checked.
initNotInNameServer(17) - The initiator was not found in
Name Server database.
tgtNotInNameServer(18) - The target was not found in
Name Server database.
tgtNotInFlogiServer(19) - The target was not found in
FLOGI Server database."
SYNTAX INTEGER {
success(1),
noLicense(2),
generalError(3),
notInNameServer(4),
notInFlogiServer(5),
deviceNotOnIlc(6),
deviceNotScsi(7),
deviceNotInitiator(8),
deviceNotTarget(9),
deviceNotFibreChannel(10),
ipcTimeout(11),
cfsError(12),
cfsTimeout(13),
portsUnprovisioned(14),
initTargetZonedOut(15),
statusNotChecked(16),
initNotInNameServer(17),
tgtNotInNameServer(18),
tgtNotInFlogiServer(19)
}
CSFlowCfgReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the reason code associated with SCSI flow
feature configuration notifications.
success(1) - successful.
ipcError(2) - IPC error.
ipcTimeout(3) - IPC timeout.
sfmGenericError(4) - SCSI Flow Manager error.
sfcGenericError(5) - SCSI Flow Client error.
cfsError(6) - Cisco Fabric Service error.
cfsTimeout(7) - Cisco Fabric Service timeout.
deviceNotOnIlc(8) - device was not on Intelligent
Line Card.
lcIpcError(9) - Line card IPC error.
tcamError(10) - Hardware programming (TCAM)
error.
ilcAsicDrvError(11) - Intelligent Line Card ASIC
driver error.
dppError(12) - Data Path Processor error.
statusNotChecked(13) - The configuration status has
not been checked.
sfcDBError(14) - SCSI Flow Client process on
ILC gives Database error.
sfcNoSuchFlow(15) - No such flow exists on SFC process
on ILC.
sfcFlowExists(16) - The flow already exists on the SFC
process on ILC.
dppNoBuffers(17) - No free buffers are available on the
DPP.
dppNoMemory(18) - No more memory is available on the DPP.
dppFlowExists(19) - Flow already exists on the DPP."
SYNTAX INTEGER {
success(1),
ipcError(2),
ipcTimeout(3),
sfmGenericError(4),
sfcGenericError(5),
cfsError(6),
cfsTimeout(7),
deviceNotOnIlc(8),
lcIpcError(9),
tcamError(10),
ilcAsicDrvError(11),
dppError(12),
statusNotChecked(13),
sfcDBError(14),
sfcNoSuchFlow(15),
sfcFlowExists(16),
dppNoBuffers(17),
dppNoMemory(18),
dppFlowExists(19)
}
CSFlowFeatureCfgReasonCode ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Represents the reason code to be used with SCSI flow
feature configuration notifications.
success(1) - successful.
featureCfgFailure(2) - failure in configuring the feature.
flowVerifFailure(3) - flow verification failure."
SYNTAX INTEGER {
success(1),
featureCfgFailure(2),
flowVerifFailure(3)
}
-- Scsi Flow Table
ciscoScsiFlowNextIndexAvail OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the next available value
for the object ciscoScsiFlowId. If all values
are exhausted, then this object will contain a 0
value. A management application should read
this object, get the (non-zero) value and use
same for creating an entry in the
ciscoScsiFlowTable.
If two network management applications read
this object at the same time and try to create
an entry in the ciscoScsiFlowTable, only one
of them will succeed. The network management
application which failed, will need to re-read
this object and try the SET again."
::= { csfConfiguration 1 }
ciscoScsiFlowTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoScsiFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table allows configuration of SCSI flows.
The Initiator should be connected to a port on an
Intelligent Line Card on the local switch.
The Target device can be present anywhere in
the network. The management application should
create entries in this table for all SCSI flows
it is interested in. This table contains all the
SCSI flows configured on the local device. A
SCSI flow is identified uniquely by a SCSI flow
ID."
::= { csfConfiguration 2 }
ciscoScsiFlowEntry OBJECT-TYPE
SYNTAX CiscoScsiFlowEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry, which is uniquely identified by the
SCSI flow ID, contains the various attributes of
a SCSI flow."
INDEX { ciscoScsiFlowId }
::= { ciscoScsiFlowTable 1 }
CiscoScsiFlowEntry ::= SEQUENCE {
ciscoScsiFlowId Unsigned32,
ciscoScsiFlowIntrWwn FcNameId,
ciscoScsiFlowTargetWwn FcNameId,
ciscoScsiFlowIntrVsan VsanIndex,
ciscoScsiFlowTargetVsan VsanIndex,
ciscoScsiFlowAllLuns TruthValue,
ciscoScsiFlowWriteAcc TruthValue,
ciscoScsiFlowBufCount Unsigned32,
ciscoScsiFlowStatsEnabled TruthValue,
ciscoScsiFlowClearStats INTEGER,
ciscoScsiFlowIntrVrfStatus CSFlowVerifyReasonCode,
ciscoScsiFlowTgtVrfStatus CSFlowVerifyReasonCode,
ciscoScsiFlowIntrLCStatus CSFlowVerifyReasonCode,
ciscoScsiFlowTgtLCStatus CSFlowVerifyReasonCode,
ciscoScsiFlowRowStatus RowStatus
}
ciscoScsiFlowId OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object represents the flow identifier."
::= { ciscoScsiFlowEntry 1 }
ciscoScsiFlowIntrWwn OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the pWWN of the
Initiator in the flow. This object must
be set to a valid value before or
concurrently setting the corresponding
instance of ciscoScsiFlowRowStatus
object to 'active'."
::= { ciscoScsiFlowEntry 2 }
ciscoScsiFlowTargetWwn OBJECT-TYPE
SYNTAX FcNameId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the pWWN of the
Target in the flow. This object must
be set to a valid value before or
concurrently setting the corresponding
instance of ciscoScsiFlowRowStatus
object to 'active'."
::= { ciscoScsiFlowEntry 3 }
ciscoScsiFlowIntrVsan OBJECT-TYPE
SYNTAX VsanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VSAN ID of the initiator on which the flow
is configured."
DEFVAL { 1 }
::= { ciscoScsiFlowEntry 4 }
ciscoScsiFlowTargetVsan OBJECT-TYPE
SYNTAX VsanIndex
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The VSAN ID of the target on which the flow
is configured."
DEFVAL { 1 }
::= { ciscoScsiFlowEntry 5 }
ciscoScsiFlowAllLuns OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If this object is set to 'true', it specifies
that all the LUNs on the target are to be
included in the flow."
DEFVAL { true }
::= { ciscoScsiFlowEntry 6 }
ciscoScsiFlowWriteAcc OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if write-acceleration
feature is enabled for this flow. If set to
'true' it is enabled. If set to 'false', it
is disabled."
DEFVAL { false }
::= { ciscoScsiFlowEntry 7 }
ciscoScsiFlowBufCount OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The value of this object is relevant only if
the corresponding instance of
ciscoScsiFlowWriteAcc has been set to 'true'.
It specifies the number of buffers to be
used for write-acceleration."
DEFVAL { 1024 }
::= { ciscoScsiFlowEntry 8 }
ciscoScsiFlowStatsEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies if the statistics
gathering needs to be enabled for this flow.
If it is set to 'true', then it is enabled.
If it is set to 'false', then it is disabled."
DEFVAL { false }
::= { ciscoScsiFlowEntry 9 }
ciscoScsiFlowClearStats OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
noop(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object assists in clearing the statistics
for this flow.
If this object is set to 'clear(1)', it results
in all statistics for this flow being cleared.
No action is taken if it is set to 'noop(2)'.
The value of this object when read is always
'noop(2)'."
::= { ciscoScsiFlowEntry 10 }
ciscoScsiFlowIntrVrfStatus OBJECT-TYPE
SYNTAX CSFlowVerifyReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The verification status of the initiator
device corresponding to the SCSI Flow."
::= { ciscoScsiFlowEntry 11 }
ciscoScsiFlowTgtVrfStatus OBJECT-TYPE
SYNTAX CSFlowVerifyReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The verification status of the target
device corresponding to the SCSI Flow."
::= { ciscoScsiFlowEntry 12 }
ciscoScsiFlowIntrLCStatus OBJECT-TYPE
SYNTAX CSFlowVerifyReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the linecard where the SCSI Flow
initiator device is located."
::= { ciscoScsiFlowEntry 13 }
ciscoScsiFlowTgtLCStatus OBJECT-TYPE
SYNTAX CSFlowVerifyReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of the linecard where the SCSI Flow
target device is located."
::= { ciscoScsiFlowEntry 14 }
ciscoScsiFlowRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this conceptual row.
When creating an entry in this table, the
management application MUST set values for the
corresponding instances of ciscoScsiFlowIntrWwn
and ciscoScsiFlowTargetWwn before or
concurrently with setting this object to 'active'."
::= { ciscoScsiFlowEntry 15 }
ciscoScsiFlowNum OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the flow ID corresponding
to which notifications need to be sent."
::= { csfConfiguration 3 }
ciscoScsiFlowDeviceType OBJECT-TYPE
SYNTAX CSFlowDeviceType
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates whether the notification
pertains to an initiator or target."
::= { csfConfiguration 4 }
ciscoScsiFlowVerifyReasonCode OBJECT-TYPE
SYNTAX CSFlowVerifyReasonCode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the verification reason code
to be included in notifications."
::= { csfConfiguration 5 }
ciscoScsiFlowCfgReasonCode OBJECT-TYPE
SYNTAX CSFlowCfgReasonCode
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"This object indicates the feature configuration
reason code to be included in notifications."
::= { csfConfiguration 6 }
ciscoScsiFlowStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoScsiFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing statistics related to SCSI
flows on active LUNs. Counters in this table
pertaining to a flow on a LUN will be populated
if the corresponding statistics gathering object
for that flow (ciscoScsiFlowStatsEnabled) is
enabled and I/Os have been done to that LUN. The
management application can cause entries to be
created in this table by setting the appropriate
instance of ciscoScsiFlowStatsEnabled object."
::= { csfStats 1 }
ciscoScsiFlowStatsEntry OBJECT-TYPE
SYNTAX CiscoScsiFlowStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
An entry contains the statistics related to a
LUN on a flow."
INDEX { ciscoScsiFlowId,
ciscoScsiFlowLunId }
::= { ciscoScsiFlowStatsTable 1 }
CiscoScsiFlowStatsEntry ::= SEQUENCE {
ciscoScsiFlowLunId ScsiLUNOrZero,
ciscoScsiFlowRdIos Counter64,
ciscoScsiFlowRdFailedIos Counter32,
ciscoScsiFlowRdTimeouts Counter32,
ciscoScsiFlowRdBlocks Counter64,
ciscoScsiFlowRdMaxBlocks Gauge32,
ciscoScsiFlowRdMinTime Gauge32,
ciscoScsiFlowRdMaxTime Gauge32,
ciscoScsiFlowRdsActive Gauge32,
ciscoScsiFlowWrIos Counter64,
ciscoScsiFlowWrFailedIos Counter32,
ciscoScsiFlowWrTimeouts Counter32,
ciscoScsiFlowWrBlocks Counter64,
ciscoScsiFlowWrMaxBlocks Gauge32,
ciscoScsiFlowWrMinTime Gauge32,
ciscoScsiFlowWrMaxTime Gauge32,
ciscoScsiFlowWrsActive Gauge32,
ciscoScsiFlowTestUnitRdys Counter32,
ciscoScsiFlowRepLuns Counter32,
ciscoScsiFlowInquirys Counter32,
ciscoScsiFlowRdCapacitys Counter32,
ciscoScsiFlowModeSenses Counter32,
ciscoScsiFlowReqSenses Counter32,
ciscoScsiFlowRxFc2Frames Counter64,
ciscoScsiFlowTxFc2Frames Counter64,
ciscoScsiFlowRxFc2Octets Counter64,
ciscoScsiFlowTxFc2Octets Counter64,
ciscoScsiFlowBusyStatuses Counter32,
ciscoScsiFlowStatusResvConfs Counter32,
ciscoScsiFlowTskSetFulStatuses Counter32,
ciscoScsiFlowAcaActiveStatuses Counter32,
ciscoScsiFlowSenseKeyNotRdyErrs Counter32,
ciscoScsiFlowSenseKeyMedErrs Counter32,
ciscoScsiFlowSenseKeyHwErrs Counter32,
ciscoScsiFlowSenseKeyIllReqErrs Counter32,
ciscoScsiFlowSenseKeyUnitAttErrs Counter32,
ciscoScsiFlowSenseKeyDatProtErrs Counter32,
ciscoScsiFlowSenseKeyBlankErrs Counter32,
ciscoScsiFlowSenseKeyCpAbrtErrs Counter32,
ciscoScsiFlowSenseKeyAbrtCmdErrs Counter32,
ciscoScsiFlowSenseKeyVolFlowErrs Counter32,
ciscoScsiFlowSenseKeyMiscmpErrs Counter32,
ciscoScsiFlowAbts Counter32
}
ciscoScsiFlowLunId OBJECT-TYPE
SYNTAX ScsiLUNOrZero
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The LUN ID on this flow on which the statistics
are gathered."
::= { ciscoScsiFlowStatsEntry 1 }
ciscoScsiFlowRdIos OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCSI read operations on this
LUN on this flow."
::= { ciscoScsiFlowStatsEntry 2 }
ciscoScsiFlowRdFailedIos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCSI read operations that
have failed on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 3 }
ciscoScsiFlowRdTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCSI read operations that
have timed out on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 4 }
ciscoScsiFlowRdBlocks OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of blocks that have been read on
this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 5 }
ciscoScsiFlowRdMaxBlocks OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of blocks read across all read
operations on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 6 }
ciscoScsiFlowRdMinTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum response time over all read operations
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 7 }
ciscoScsiFlowRdMaxTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum response time over all read operations
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 8 }
ciscoScsiFlowRdsActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of read operations that are currently
active on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 9 }
ciscoScsiFlowWrIos OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCSI write operations on this
LUN on this flow."
::= { ciscoScsiFlowStatsEntry 10 }
ciscoScsiFlowWrFailedIos OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCSI write operations that
have failed on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 11 }
ciscoScsiFlowWrTimeouts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCSI write operations that
have timed out on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 12 }
ciscoScsiFlowWrBlocks OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of blocks that have been written
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 13 }
ciscoScsiFlowWrMaxBlocks OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of blocks written across all
write operations on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 14 }
ciscoScsiFlowWrMinTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum response time over all write operations
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 15 }
ciscoScsiFlowWrMaxTime OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum response time over all write operations
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 16 }
ciscoScsiFlowWrsActive OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of write operations that are currently
active on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 17 }
ciscoScsiFlowTestUnitRdys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of test unit ready SCSI commands sent
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 18 }
ciscoScsiFlowRepLuns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Report LUN SCSI commands sent
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 19 }
ciscoScsiFlowInquirys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SCSI Inquiry commands sent on
this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 20 }
ciscoScsiFlowRdCapacitys OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Read Capacity SCSI commands sent on
this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 21 }
ciscoScsiFlowModeSenses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Mode Sense SCSI commands sent on this
LUN on this flow."
::= { ciscoScsiFlowStatsEntry 22 }
ciscoScsiFlowReqSenses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Request Sense SCSI commands sent on
LUN on this this flow."
::= { ciscoScsiFlowStatsEntry 23 }
ciscoScsiFlowRxFc2Frames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link-level FC frames received
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 24 }
ciscoScsiFlowTxFc2Frames OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of link-level frames transmitted
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 25 }
ciscoScsiFlowRxFc2Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets received in link-level
frames on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 26 }
ciscoScsiFlowTxFc2Octets OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of octets transmitted in link-level
frames on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 27 }
ciscoScsiFlowBusyStatuses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of busy SCSI statuses received on this
LUN on this flow."
::= { ciscoScsiFlowStatsEntry 28 }
ciscoScsiFlowStatusResvConfs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of reservation conflicts SCSI status
received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 29 }
ciscoScsiFlowTskSetFulStatuses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of task set full SCSI statuses received
on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 30 }
ciscoScsiFlowAcaActiveStatuses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ACA active statuses received on this
LUN on this flow."
::= { ciscoScsiFlowStatsEntry 31 }
ciscoScsiFlowSenseKeyNotRdyErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of NOT READY SCSI SENSE key errors
received on this LUN on this flow. This indicates
that the logical unit being addressed cannot be
accessed."
::= { ciscoScsiFlowStatsEntry 32 }
ciscoScsiFlowSenseKeyMedErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MEDIUM ERROR SCSI SENSE key errors
received on this LUN on this flow. This indicates
that the command terminated with a non-recovered
error condition possibly caused by a flaw in the
medium."
::= { ciscoScsiFlowStatsEntry 33 }
ciscoScsiFlowSenseKeyHwErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of HARDWARE ERROR SCSI SENSE key
errors received on this LUN on this flow. This
indicates that the target detected a
non-recoverable hardware failure."
::= { ciscoScsiFlowStatsEntry 34 }
ciscoScsiFlowSenseKeyIllReqErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ILLEGAL REQUEST SCSI SENSE key
errors received on this LUN on this flow. "
::= { ciscoScsiFlowStatsEntry 35 }
ciscoScsiFlowSenseKeyUnitAttErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of UNIT ATTENTION SCSI SENSE key
errors received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 36 }
ciscoScsiFlowSenseKeyDatProtErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of DATA PROTECT SCSI SENSE key errors
received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 37 }
ciscoScsiFlowSenseKeyBlankErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of BLANK CHECK SCSI SENSE key errors
received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 38 }
ciscoScsiFlowSenseKeyCpAbrtErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of COPY ABORTED SCSI SENSE key errors
received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 39 }
ciscoScsiFlowSenseKeyAbrtCmdErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ABORTED COMMAND SCSI SENSE key
errors received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 40 }
ciscoScsiFlowSenseKeyVolFlowErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of VOLUME OVERFLOW SCSI SENSE key
errors received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 41 }
ciscoScsiFlowSenseKeyMiscmpErrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of MISCOMPARE SCSI SENSE key errors
received on this LUN on this flow."
::= { ciscoScsiFlowStatsEntry 42 }
ciscoScsiFlowAbts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ABTSs encountered on this LUN on this
flow."
::= { ciscoScsiFlowStatsEntry 43 }
ciscoScsiFlowWrAccStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoScsiFlowWrAccStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing status for flows with
write-acceleration configured."
::= { csfFeatureStatus 1 }
ciscoScsiFlowWrAccStatusEntry OBJECT-TYPE
SYNTAX CiscoScsiFlowWrAccStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
An entry contains the status for
write-acceleration feature of the flow."
INDEX { ciscoScsiFlowId }
::= { ciscoScsiFlowWrAccStatusTable 1 }
CiscoScsiFlowWrAccStatusEntry ::= SEQUENCE {
ciscoScsiFlowWrAccCfgStatus CSFlowFeatureCfgReasonCode,
ciscoScsiFlowWrAccIntrCfgStatus CSFlowCfgReasonCode,
ciscoScsiFlowWrAccTgtCfgStatus CSFlowCfgReasonCode
}
ciscoScsiFlowWrAccCfgStatus OBJECT-TYPE
SYNTAX CSFlowFeatureCfgReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration status for write-acceleration
feature for this flow."
::= { ciscoScsiFlowWrAccStatusEntry 1 }
ciscoScsiFlowWrAccIntrCfgStatus OBJECT-TYPE
SYNTAX CSFlowCfgReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initiator configuration status for write-acceleration
feature for this flow."
::= { ciscoScsiFlowWrAccStatusEntry 2 }
ciscoScsiFlowWrAccTgtCfgStatus OBJECT-TYPE
SYNTAX CSFlowCfgReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The target configuration status for write-acceleration
feature for this flow."
::= { ciscoScsiFlowWrAccStatusEntry 3 }
ciscoScsiFlowStatsStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF CiscoScsiFlowStatsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing status for flows with
statistics configured."
::= { csfFeatureStatus 2 }
ciscoScsiFlowStatsStatusEntry OBJECT-TYPE
SYNTAX CiscoScsiFlowStatsStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table.
An entry contains the status for
statistics feature of the flow."
INDEX { ciscoScsiFlowId }
::= { ciscoScsiFlowStatsStatusTable 1 }
CiscoScsiFlowStatsStatusEntry ::= SEQUENCE {
ciscoScsiFlowStatsCfgStatus CSFlowFeatureCfgReasonCode,
ciscoScsiFlowStatsIntrCfgStatus CSFlowCfgReasonCode,
ciscoScsiFlowStatsTgtCfgStatus CSFlowCfgReasonCode
}
ciscoScsiFlowStatsCfgStatus OBJECT-TYPE
SYNTAX CSFlowFeatureCfgReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configuration status for statistics
feature for this flow."
::= { ciscoScsiFlowStatsStatusEntry 1 }
ciscoScsiFlowStatsIntrCfgStatus OBJECT-TYPE
SYNTAX CSFlowCfgReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The initiator configuration status for statistics
feature for this flow."
::= { ciscoScsiFlowStatsStatusEntry 2 }
ciscoScsiFlowStatsTgtCfgStatus OBJECT-TYPE
SYNTAX CSFlowCfgReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The target configuration status for statistics
feature for this flow."
::= { ciscoScsiFlowStatsStatusEntry 3 }
-- Notification
ciscoScsiFlowVerifyNotify NOTIFICATION-TYPE
OBJECTS { ciscoScsiFlowNum,
ciscoScsiFlowDeviceType,
ciscoScsiFlowVerifyReasonCode }
STATUS current
DESCRIPTION
"This notification is generated whenever a
change occurs in the fabric causing a flow
to be valid or invalid. The ciscoScsiFlowNum
object specifies the flow and the
ciscoScsiFlowVerifyReasonCode object specifies the
actual reason."
::= { ciscoScsiFlowMIBNotifs 1 }
ciscoScsiFlowWrAccNotify NOTIFICATION-TYPE
OBJECTS { ciscoScsiFlowNum,
ciscoScsiFlowDeviceType,
ciscoScsiFlowCfgReasonCode }
STATUS current
DESCRIPTION
"This notification is generated whenever write
acceleration is configured on a flow to indicate
the outcome."
::= { ciscoScsiFlowMIBNotifs 2 }
ciscoScsiFlowStatsNotify NOTIFICATION-TYPE
OBJECTS { ciscoScsiFlowNum,
ciscoScsiFlowDeviceType,
ciscoScsiFlowCfgReasonCode }
STATUS current
DESCRIPTION
"This notification is generated whenever statistics
gathering is configured on a flow to indicate the
outcome."
::= { ciscoScsiFlowMIBNotifs 3 }
-- Compliance
ciscoScsiFlowMIBCompliances OBJECT IDENTIFIER
::= { ciscoScsiFlowMIBConform 1 }
ciscoScsiFlowMIBGroups OBJECT IDENTIFIER
::= { ciscoScsiFlowMIBConform 2 }
ciscoScsiFlowMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities that
implement the CISCO-SCSI-FLOW-MIB."
MODULE MANDATORY-GROUPS { ciscoScsiFlowGroup,
ciscoScsiFlowNotifyGroup,
ciscoScsiFlowInfoGroup,
ciscoScsiFlowStatsGroup,
ciscoScsiFlowFeatureStatusGroup
}
::= { ciscoScsiFlowMIBCompliances 1 }
-- Units of conformance
ciscoScsiFlowGroup OBJECT-GROUP
OBJECTS { ciscoScsiFlowNextIndexAvail,
ciscoScsiFlowIntrWwn,
ciscoScsiFlowTargetWwn,
ciscoScsiFlowIntrVsan,
ciscoScsiFlowTargetVsan,
ciscoScsiFlowAllLuns,
ciscoScsiFlowWriteAcc,
ciscoScsiFlowBufCount,
ciscoScsiFlowStatsEnabled,
ciscoScsiFlowRowStatus,
ciscoScsiFlowClearStats,
ciscoScsiFlowIntrVrfStatus,
ciscoScsiFlowIntrLCStatus,
ciscoScsiFlowTgtLCStatus,
ciscoScsiFlowTgtVrfStatus }
STATUS current
DESCRIPTION
"A set of objects for configuring SCSI flows."
::= { ciscoScsiFlowMIBGroups 1 }
ciscoScsiFlowStatsGroup OBJECT-GROUP
OBJECTS { ciscoScsiFlowRdIos,
ciscoScsiFlowRdFailedIos,
ciscoScsiFlowRdTimeouts,
ciscoScsiFlowRdBlocks,
ciscoScsiFlowRdMaxBlocks,
ciscoScsiFlowRdMinTime,
ciscoScsiFlowRdMaxTime,
ciscoScsiFlowRdsActive,
ciscoScsiFlowWrIos,
ciscoScsiFlowWrFailedIos,
ciscoScsiFlowWrTimeouts,
ciscoScsiFlowWrBlocks,
ciscoScsiFlowWrMaxBlocks,
ciscoScsiFlowWrMinTime,
ciscoScsiFlowWrMaxTime,
ciscoScsiFlowWrsActive,
ciscoScsiFlowTestUnitRdys,
ciscoScsiFlowRepLuns,
ciscoScsiFlowInquirys,
ciscoScsiFlowRdCapacitys,
ciscoScsiFlowModeSenses,
ciscoScsiFlowReqSenses,
ciscoScsiFlowRxFc2Frames,
ciscoScsiFlowTxFc2Frames,
ciscoScsiFlowRxFc2Octets,
ciscoScsiFlowTxFc2Octets,
ciscoScsiFlowBusyStatuses,
ciscoScsiFlowStatusResvConfs,
ciscoScsiFlowTskSetFulStatuses,
ciscoScsiFlowAcaActiveStatuses,
ciscoScsiFlowSenseKeyNotRdyErrs,
ciscoScsiFlowSenseKeyMedErrs,
ciscoScsiFlowSenseKeyHwErrs,
ciscoScsiFlowSenseKeyIllReqErrs,
ciscoScsiFlowSenseKeyUnitAttErrs,
ciscoScsiFlowSenseKeyDatProtErrs,
ciscoScsiFlowSenseKeyBlankErrs,
ciscoScsiFlowSenseKeyCpAbrtErrs,
ciscoScsiFlowSenseKeyAbrtCmdErrs,
ciscoScsiFlowSenseKeyVolFlowErrs,
ciscoScsiFlowSenseKeyMiscmpErrs,
ciscoScsiFlowAbts }
STATUS current
DESCRIPTION
"A collection of objects for displaying
SCSI flow statistics."
::= { ciscoScsiFlowMIBGroups 2 }
ciscoScsiFlowInfoGroup OBJECT-GROUP
OBJECTS { ciscoScsiFlowNum,
ciscoScsiFlowDeviceType,
ciscoScsiFlowVerifyReasonCode,
ciscoScsiFlowCfgReasonCode }
STATUS current
DESCRIPTION
"A collection of notification information
objects for notification generation."
::= { ciscoScsiFlowMIBGroups 3 }
ciscoScsiFlowNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS { ciscoScsiFlowVerifyNotify,
ciscoScsiFlowWrAccNotify,
ciscoScsiFlowStatsNotify }
STATUS current
DESCRIPTION
"A collection of notifications for monitoring
SCSI flows."
::= { ciscoScsiFlowMIBGroups 4 }
ciscoScsiFlowFeatureStatusGroup OBJECT-GROUP
OBJECTS { ciscoScsiFlowWrAccCfgStatus,
ciscoScsiFlowWrAccIntrCfgStatus,
ciscoScsiFlowWrAccTgtCfgStatus,
ciscoScsiFlowStatsCfgStatus,
ciscoScsiFlowStatsIntrCfgStatus,
ciscoScsiFlowStatsTgtCfgStatus }
STATUS current
DESCRIPTION
"A collection of objects for monitoring feature
status on SCSI flows."
::= { ciscoScsiFlowMIBGroups 5 }
END
Reference in New Issue View Git Blame Copy Permalink