MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-RTTMON-ICMP-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1502 lines
47 KiB
Plaintext
Raw Blame History

-- *****************************************************************
-- CISCO-RTTMON-ICMP-MIB.my: IP SLA Icmp MIB file
--
-- August 2005, Katherine Yang
--
-- Copyright (c) 2005 by cisco Systems, Inc.
-- All rights reserved.
--
-- *****************************************************************
CISCO-RTTMON-ICMP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Counter32,
Gauge32
FROM SNMPv2-SMI
TimeStamp
FROM SNMPv2-TC
MODULE-COMPLIANCE,
OBJECT-GROUP
FROM SNMPv2-CONF
rttMonLatestOper,
rttMonCtrlAdminIndex,
rttMonStats
FROM CISCO-RTTMON-MIB
RttResponseSense
FROM CISCO-RTTMON-TC-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoRttMonIcmpMIB MODULE-IDENTITY
LAST-UPDATED "200508090000Z"
ORGANIZATION "Cisco Systems, Inc."
CONTACT-INFO
"Cisco Systems, Inc.
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
Tel: +1 800 553 NETS
Email: cs-ipsla@cisco.com"
DESCRIPTION
"An extension to the CISCO-RTTMON-MIB for ICMP
operations. The ICMP Jitter operation provides capability
to measure metrics such as RTT (Round Trip Time), Jitter,
packet loss, one-way latency by sending ICMP TIMESTAMP
stream to the destination devices."
REVISION "200508090000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 486 }
ciscoRttMonIcmpMIBNotifs OBJECT IDENTIFIER
::= { ciscoRttMonIcmpMIB 0}
ciscoRttMonIcmpMIBObjects OBJECT IDENTIFIER
::= { ciscoRttMonIcmpMIB 1}
--
-- LatestIcmpJitterOper Table
--
rttMonLatestIcmpJitterOperTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonLatestIcmpJitterOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table which contains the status of latest ICMP Jitter
operation.
Each conceptual row corresponds to a ICMP jitter probe
defined in rttMonCtrlAdminTable and has same index as
rttMonCtrlAdminTable.
An entry in this table is created only if the
rttMonCtrlAdminRttType is 'icmpJitter', the
rttMonEchoAdminProtocol is 'icmpJitterAppl' and valid
rttMonEchoAdminTargetAddress is configured. The entry will
start to collect data when rttMonCtrlAdminStatus from
rttMonCtrlAdminStatus is in 'active' state. The entry
will be removed when the rttMonCtrlAdminStatus is in
'destroy' state."
REFERENCE
"rttMonCtrlAdminTable from CISCO-RTTMON-MIB
rttMonEchoAdminProtocol from CISCO-RTTMON-MIB
rttMonCtrlAdminRttType from CISCO-RTTMON-MIB
rttMonEchoAdminTargetAddress from CISCO-RTTMON-MIB"
::= { rttMonLatestOper 4 }
rttMonLatestIcmpJitterOperEntry OBJECT-TYPE
SYNTAX RttMonLatestIcmpJitterOperEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A list of objects that record the latest
ICMP jitter operation."
INDEX { rttMonCtrlAdminIndex }
::= { rttMonLatestIcmpJitterOperTable 1 }
RttMonLatestIcmpJitterOperEntry ::= SEQUENCE
{
rttMonLatestIcmpJitterNumRTT Gauge32,
rttMonLatestIcmpJitterRTTSum Gauge32,
rttMonLatestIcmpJitterRTTSum2 Gauge32,
rttMonLatestIcmpJitterRTTMin Gauge32,
rttMonLatestIcmpJitterRTTMax Gauge32,
rttMonLatestIcmpJitterMinPosSD Gauge32,
rttMonLatestIcmpJitterMaxPosSD Gauge32,
rttMonLatestIcmpJitterNumPosSD Gauge32,
rttMonLatestIcmpJitterSumPosSD Gauge32,
rttMonLatestIcmpJitterSum2PosSD Gauge32,
rttMonLatestIcmpJitterMinNegSD Gauge32,
rttMonLatestIcmpJitterMaxNegSD Gauge32,
rttMonLatestIcmpJitterNumNegSD Gauge32,
rttMonLatestIcmpJitterSumNegSD Gauge32,
rttMonLatestIcmpJitterSum2NegSD Gauge32,
rttMonLatestIcmpJitterMinPosDS Gauge32,
rttMonLatestIcmpJitterMaxPosDS Gauge32,
rttMonLatestIcmpJitterNumPosDS Gauge32,
rttMonLatestIcmpJitterSumPosDS Gauge32,
rttMonLatestIcmpJitterSum2PosDS Gauge32,
rttMonLatestIcmpJitterMinNegDS Gauge32,
rttMonLatestIcmpJitterMaxNegDS Gauge32,
rttMonLatestIcmpJitterNumNegDS Gauge32,
rttMonLatestIcmpJitterSumNegDS Gauge32,
rttMonLatestIcmpJitterSum2NegDS Gauge32,
rttMonLatestIcmpJitterPktLoss Gauge32,
rttMonLatestIcmpJPktOutSeqBoth Gauge32,
rttMonLatestIcmpJPktOutSeqSD Gauge32,
rttMonLatestIcmpJPktOutSeqDS Gauge32,
rttMonLatestIcmpJitterPktSkipped Gauge32,
rttMonLatestIcmpJitterSense RttResponseSense,
rttMonLatestIcmpJitterPktLateA Gauge32,
rttMonLatestIcmpJitterMinSucPktL Gauge32,
rttMonLatestIcmpJitterMaxSucPktL Gauge32,
rttMonLatestIcmpJitterOWSumSD Gauge32,
rttMonLatestIcmpJitterOWSum2SD Gauge32,
rttMonLatestIcmpJitterOWMinSD Gauge32,
rttMonLatestIcmpJitterOWMaxSD Gauge32,
rttMonLatestIcmpJitterOWSumDS Gauge32,
rttMonLatestIcmpJitterOWSum2DS Gauge32,
rttMonLatestIcmpJitterOWMinDS Gauge32,
rttMonLatestIcmpJitterOWMaxDS Gauge32,
rttMonLatestIcmpJitterNumOW Gauge32,
rttMonLatestIcmpJitterAvgJitter Gauge32,
rttMonLatestIcmpJitterAvgSDJ Gauge32,
rttMonLatestIcmpJitterAvgDSJ Gauge32,
rttMonLatestIcmpJitterOWAvgSD Gauge32,
rttMonLatestIcmpJitterOWAvgDS Gauge32,
rttMonLatestIcmpJitterIAJOut Gauge32,
rttMonLatestIcmpJitterIAJIn Gauge32
}
rttMonLatestIcmpJitterNumRTT OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT's that were successfully measured."
::= { rttMonLatestIcmpJitterOperEntry 1 }
rttMonLatestIcmpJitterRTTSum OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's that are successfully measured.
The number of successfully measured RTT is
stored in rttMonLatestIcmpJitterNumRTT."
::= { rttMonLatestIcmpJitterOperEntry 2 }
rttMonLatestIcmpJitterRTTSum2 OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured."
::= { rttMonLatestIcmpJitterOperEntry 3 }
rttMonLatestIcmpJitterRTTMin OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTT's that were successfully measured."
::= { rttMonLatestIcmpJitterOperEntry 4 }
rttMonLatestIcmpJitterRTTMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTT's that were successfully measured."
::= { rttMonLatestIcmpJitterOperEntry 5 }
rttMonLatestIcmpJitterMinPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values for packets sent
from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 6 }
rttMonLatestIcmpJitterMaxPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values for packets sent
from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 7 }
rttMonLatestIcmpJitterNumPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for packets
sent from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 8 }
rttMonLatestIcmpJitterSumPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for packets sent
source to destination. The number of such values
is stored in rttMonLatestIcmpJitterNumPosSD."
::= { rttMonLatestIcmpJitterOperEntry 9 }
rttMonLatestIcmpJitterSum2PosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all positive jitter values for
packets sent from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 10 }
rttMonLatestIcmpJitterMinNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute values of all negative jitter values
for packets sent from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 11 }
rttMonLatestIcmpJitterMaxNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute values of all negative jitter values
for packets sent from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 12 }
rttMonLatestIcmpJitterNumNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for packets
sent from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 13 }
rttMonLatestIcmpJitterSumNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for packets sent
from source to destination. The number of such values
is stored in rttMonLatestIcmpJitterNumNegSD."
::= { rttMonLatestIcmpJitterOperEntry 14 }
rttMonLatestIcmpJitterSum2NegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all negative jitter values for
packets sent from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 15 }
rttMonLatestIcmpJitterMinPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values for packets sent
from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 16 }
rttMonLatestIcmpJitterMaxPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values for packets sent
from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 17 }
rttMonLatestIcmpJitterNumPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for packets
sent from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 18 }
rttMonLatestIcmpJitterSumPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for packets sent
from destination to source. The number of such values
is stored in rttMonLatestIcmpJitterNumPosDS."
::= { rttMonLatestIcmpJitterOperEntry 19 }
rttMonLatestIcmpJitterSum2PosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all positive jitter values for
packets sent from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 20 }
rttMonLatestIcmpJitterMinNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values for packets sent
from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 21 }
rttMonLatestIcmpJitterMaxNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values for packets sent
from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 22 }
rttMonLatestIcmpJitterNumNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for packets
sent from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 23 }
rttMonLatestIcmpJitterSumNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for packets sent
from destination to source. The number of such values
is stored in rttMonLatestIcmpJitterNumNegDS."
::= { rttMonLatestIcmpJitterOperEntry 24 }
rttMonLatestIcmpJitterSum2NegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all negative jitter values for
packets sent from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 25 }
rttMonLatestIcmpJitterPktLoss OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets lost."
::= { rttMonLatestIcmpJitterOperEntry 26 }
rttMonLatestIcmpJPktOutSeqBoth OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence in both
source-to-destination and destination-to-source direction."
::= { rttMonLatestIcmpJitterOperEntry 27 }
rttMonLatestIcmpJPktOutSeqSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence in the
direction of source-to-destination."
::= { rttMonLatestIcmpJitterOperEntry 28 }
rttMonLatestIcmpJPktOutSeqDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence in the
direction of destination-to-source."
::= { rttMonLatestIcmpJitterOperEntry 29 }
rttMonLatestIcmpJitterPktSkipped OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets in the operation that could not be
initiated due to an internal error."
::= { rttMonLatestIcmpJitterOperEntry 30 }
rttMonLatestIcmpJitterSense OBJECT-TYPE
SYNTAX RttResponseSense
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An application specific sense code for the completion status."
::= { rttMonLatestIcmpJitterOperEntry 31 }
rttMonLatestIcmpJitterPktLateA OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that arrived after the timeout."
::= { rttMonLatestIcmpJitterOperEntry 32 }
rttMonLatestIcmpJitterMinSucPktL OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of packets that are dropped
successively."
::= { rttMonLatestIcmpJitterOperEntry 33 }
rttMonLatestIcmpJitterMaxSucPktL OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of packets that are dropped
successively."
::= { rttMonLatestIcmpJitterOperEntry 34 }
rttMonLatestIcmpJitterOWSumSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 35 }
rttMonLatestIcmpJitterOWSum2SD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from source to
destination."
::= { rttMonLatestIcmpJitterOperEntry 36 }
rttMonLatestIcmpJitterOWMinSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from
source to destination."
::= { rttMonLatestIcmpJitterOperEntry 37 }
rttMonLatestIcmpJitterOWMaxSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from
source to destination."
::= { rttMonLatestIcmpJitterOperEntry 38 }
rttMonLatestIcmpJitterOWSumDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 39 }
rttMonLatestIcmpJitterOWSum2DS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from
destination to source."
::= { rttMonLatestIcmpJitterOperEntry 40 }
rttMonLatestIcmpJitterOWMinDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from
destination to source."
::= { rttMonLatestIcmpJitterOperEntry 41 }
rttMonLatestIcmpJitterOWMaxDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from
destination to source."
::= { rttMonLatestIcmpJitterOperEntry 42 }
rttMonLatestIcmpJitterNumOW OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of successful one way trip time measurements."
::= { rttMonLatestIcmpJitterOperEntry 43 }
rttMonLatestIcmpJitterAvgJitter OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
in Source-to-Destionation and Destination-to-Source
direction."
::= { rttMonLatestIcmpJitterOperEntry 44 }
rttMonLatestIcmpJitterAvgSDJ OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 45 }
rttMonLatestIcmpJitterAvgDSJ OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter values
from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 46 }
rttMonLatestIcmpJitterOWAvgSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one way trip time from source to destination."
::= { rttMonLatestIcmpJitterOperEntry 47 }
rttMonLatestIcmpJitterOWAvgDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average one way trip time from destination to source."
::= { rttMonLatestIcmpJitterOperEntry 48 }
rttMonLatestIcmpJitterIAJOut OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inter-arrival jitter (RFC 1889) at responder."
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { rttMonLatestIcmpJitterOperEntry 49 }
rttMonLatestIcmpJitterIAJIn OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inter-arrival jitter (RFC 1889) at source."
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { rttMonLatestIcmpJitterOperEntry 50 }
--
-- ICMP Jitter Statistics Table
--
rttMonIcmpJitterStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RttMonIcmpJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ICMP Jitter statistics table contains summarized
information of the results for a conceptual RTT control
row. A rolling accumulated history of this information
is maintained in a series of hourly 'group(s)'.
When rttMonIcmpJitterStatsStartTimeId groups exceeds
the rttMonStatisticsAdminNumHourGroups value, the
oldest corresponding hourly group will be deleted and will
be replaced with the new rttMonIcmpJitterStatsStartTimeId
hourly group.
The table is created only if the rttMonCtrlAdminRttType
is 'icmpJitter' and the rttMonEchoAdminProtocol is
'icmpJitterAppl'. It will be removed when the corresponding
conceptual RTT control row is destroyed."
::= { rttMonStats 8 }
rttMonIcmpJitterStatsEntry OBJECT-TYPE
SYNTAX RttMonIcmpJitterStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in ICMP jitter stats table. Each entry contains the
objects which accumulate the results of a series of RTT
operations over a 60 minute time period or a time period
stored in rttMonScheduleAdminRttLife, whichever is smaller."
INDEX { rttMonCtrlAdminIndex,
rttMonIcmpJitterStatsStartTimeId
}
::= { rttMonIcmpJitterStatsTable 1 }
RttMonIcmpJitterStatsEntry ::= SEQUENCE
{
rttMonIcmpJitterStatsStartTimeId TimeStamp,
rttMonIcmpJitterStatsCompletions Counter32,
rttMonIcmpJStatsOverThresholds Counter32,
rttMonIcmpJitterStatsNumRTTs Counter32,
rttMonIcmpJitterStatsRTTSums Counter32,
rttMonIcmpJStatsRTTSum2Lows Counter32,
rttMonIcmpJStatsRTTSum2Highs Counter32,
rttMonIcmpJitterStatsRTTMin Gauge32,
rttMonIcmpJitterStatsRTTMax Gauge32,
rttMonIcmpJitterStatsMinPosSD Gauge32,
rttMonIcmpJitterStatsMaxPosSD Gauge32,
rttMonIcmpJitterStatsNumPosSDs Counter32,
rttMonIcmpJitterStatsSumPosSDs Counter32,
rttMonIcmpJStatsSum2PosSDLows Counter32,
rttMonIcmpJStatsSum2PosSDHighs Counter32,
rttMonIcmpJitterStatsMinNegSD Gauge32,
rttMonIcmpJitterStatsMaxNegSD Gauge32,
rttMonIcmpJitterStatsNumNegSDs Counter32,
rttMonIcmpJitterStatsSumNegSDs Counter32,
rttMonIcmpJStatsSum2NegSDLows Counter32,
rttMonIcmpJStatsSum2NegSDHighs Counter32,
rttMonIcmpJitterStatsMinPosDS Gauge32,
rttMonIcmpJitterStatsMaxPosDS Gauge32,
rttMonIcmpJitterStatsNumPosDSes Counter32,
rttMonIcmpJitterStatsSumPosDSes Counter32,
rttMonIcmpJStatsSum2PosDSLows Counter32,
rttMonIcmpJStatsSum2PosDSHighs Counter32,
rttMonIcmpJitterStatsMinNegDS Gauge32,
rttMonIcmpJitterStatsMaxNegDS Gauge32,
rttMonIcmpJitterStatsNumNegDSes Counter32,
rttMonIcmpJitterStatsSumNegDSes Counter32,
rttMonIcmpJStatsSum2NegDSLows Counter32,
rttMonIcmpJStatsSum2NegDSHighs Counter32,
rttMonIcmpJitterStatsPktLosses Counter32,
rttMonIcmpJStatsPktOutSeqBoth Counter32,
rttMonIcmpJStatsPktOutSeqSDs Counter32,
rttMonIcmpJStatsPktOutSeqDSes Counter32,
rttMonIcmpJitterStatsPktSkippeds Counter32,
rttMonIcmpJitterStatsErrors Counter32,
rttMonIcmpJitterStatsBusies Counter32,
rttMonIcmpJitterStatsOWSumSDs Counter32,
rttMonIcmpJStatsOWSum2SDLows Counter32,
rttMonIcmpJStatsOWSum2SDHighs Counter32,
rttMonIcmpJitterStatsOWMinSD Gauge32,
rttMonIcmpJitterStatsOWMaxSD Gauge32,
rttMonIcmpJitterStatsOWSumDSes Counter32,
rttMonIcmpJStatsOWSum2DSLows Counter32,
rttMonIcmpJStatsOWSum2DSHighs Counter32,
rttMonIcmpJitterStatsOWMinDS Gauge32,
rttMonIcmpJitterStatsOWMaxDS Gauge32,
rttMonIcmpJitterStatsNumOWs Counter32,
rttMonIcmpJitterStatsAvgJ Gauge32,
rttMonIcmpJitterStatsAvgJSD Gauge32,
rttMonIcmpJitterStatsAvgJDS Gauge32,
rttMonIcmpJitterMinSucPktLoss Gauge32,
rttMonIcmpJitterMaxSucPktLoss Gauge32,
rttMonIcmpJitterStatsIAJOut Gauge32,
rttMonIcmpJitterStatsIAJIn Gauge32,
rttMonIcmpJitterStatsPktLateAs Counter32
}
rttMonIcmpJitterStatsStartTimeId OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of sysUpTime at the time when this
row was created."
::= { rttMonIcmpJitterStatsEntry 1 }
rttMonIcmpJitterStatsCompletions OBJECT-TYPE
SYNTAX Counter32
UNITS "completions"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP jitter operation that have completed
successfully."
::= { rttMonIcmpJitterStatsEntry 2 }
rttMonIcmpJStatsOverThresholds OBJECT-TYPE
SYNTAX Counter32
UNITS "operations"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of ICMP jitter operations that violate
jitterAvg threshold which is defined in RttMonReactVar."
::= { rttMonIcmpJitterStatsEntry 3 }
rttMonIcmpJitterStatsNumRTTs OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RTT's that are successfully measured."
::= { rttMonIcmpJitterStatsEntry 4 }
rttMonIcmpJitterStatsRTTSums OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of RTT's that are successfully measured for this
rttMonIcmpJitterStatsStartTimeId hourly group. The number
of the successfully measured RTT is stored in the
rttMonIcmpJitterStatsNumRTT."
::= { rttMonIcmpJitterStatsEntry 5 }
rttMonIcmpJStatsRTTSum2Lows OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured
(low order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 6 }
rttMonIcmpJStatsRTTSum2Highs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of RTT's that are successfully measured
(high order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 7 }
rttMonIcmpJitterStatsRTTMin OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of RTT's that were successfully measured."
::= { rttMonIcmpJitterStatsEntry 8 }
rttMonIcmpJitterStatsRTTMax OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of RTT's that were successfully measured."
::= { rttMonIcmpJitterStatsEntry 9 }
rttMonIcmpJitterStatsMinPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of absolute values of all positive jitter values
for packets sent from source to destination."
::= { rttMonIcmpJitterStatsEntry 10 }
rttMonIcmpJitterStatsMaxPosSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of absolute values of all positive jitter values
for packets sent from source to destination."
::= { rttMonIcmpJitterStatsEntry 11 }
rttMonIcmpJitterStatsNumPosSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for packets
sent from source to destination."
::= { rttMonIcmpJitterStatsEntry 12 }
rttMonIcmpJitterStatsSumPosSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for packets sent
from source to destination. The number of such values
is stored in rttMonIcmpJitterStatsNumPosSD."
::= { rttMonIcmpJitterStatsEntry 13 }
rttMonIcmpJStatsSum2PosSDLows OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all positive jitter values for packets
sent from source to destination (low order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 14 }
rttMonIcmpJStatsSum2PosSDHighs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all positive jitter values for packets
sent from source to destination (high order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 15 }
rttMonIcmpJitterStatsMinNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values for packets sent
from source to destination."
::= { rttMonIcmpJitterStatsEntry 16 }
rttMonIcmpJitterStatsMaxNegSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values for packets sent
from source to destination."
::= { rttMonIcmpJitterStatsEntry 17 }
rttMonIcmpJitterStatsNumNegSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for packets
sent from source to destination."
::= { rttMonIcmpJitterStatsEntry 18 }
rttMonIcmpJitterStatsSumNegSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for packets sent
from source to destination. The number of such values
is stored in rttMonIcmpJitterStatsNumNegSD."
::= { rttMonIcmpJitterStatsEntry 19 }
rttMonIcmpJStatsSum2NegSDLows OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all negative jitter values for
packets sent from source to destination (low order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 20 }
rttMonIcmpJStatsSum2NegSDHighs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of square of all negative jitter values for
packets sent from source to destination (high order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 21 }
rttMonIcmpJitterStatsMinPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all positive jitter values for packets sent
from destination to source."
::= { rttMonIcmpJitterStatsEntry 22 }
rttMonIcmpJitterStatsMaxPosDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all positive jitter values for packets sent
from destination to source."
::= { rttMonIcmpJitterStatsEntry 23 }
rttMonIcmpJitterStatsNumPosDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all positive jitter values for packets
sent from destination to source."
::= { rttMonIcmpJitterStatsEntry 24 }
rttMonIcmpJitterStatsSumPosDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all positive jitter values for packets sent
from destination to source. The number of such values
is stored in rttMonIcmpJitterStatsNumPosDS."
::= { rttMonIcmpJitterStatsEntry 25 }
rttMonIcmpJStatsSum2PosDSLows OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all positive jitter values for
packets sent from destination to source (low order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 26 }
rttMonIcmpJStatsSum2PosDSHighs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all positive jitter values for
packets sent from destination to source (high order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 27 }
rttMonIcmpJitterStatsMinNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all negative jitter values for packets sent
from destination to source."
::= { rttMonIcmpJitterStatsEntry 28 }
rttMonIcmpJitterStatsMaxNegDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all negative jitter values for packets sent
from destination to source."
::= { rttMonIcmpJitterStatsEntry 29 }
rttMonIcmpJitterStatsNumNegDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "occurrences"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of all negative jitter values for packets
sent from destination to source."
::= { rttMonIcmpJitterStatsEntry 30 }
rttMonIcmpJitterStatsSumNegDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of all negative jitter values for packets sent
from destination to source. The number of such values
is stored in rttMonIcmpJitterStatsNumNegDS."
::= { rttMonIcmpJitterStatsEntry 31 }
rttMonIcmpJStatsSum2NegDSLows OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all negative jitter values for
packets sent from destination to source (low order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 32 }
rttMonIcmpJStatsSum2NegDSHighs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of all negative jitter values for
packets sent from destination to source (high order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 33 }
rttMonIcmpJitterStatsPktLosses OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of lost packets"
::= { rttMonIcmpJitterStatsEntry 34 }
rttMonIcmpJStatsPktOutSeqBoth OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence in both
source-to-destination and destination-to-source direction."
::= { rttMonIcmpJitterStatsEntry 35 }
rttMonIcmpJStatsPktOutSeqSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence in the
direction of source-to-destination."
::= { rttMonIcmpJitterStatsEntry 36 }
rttMonIcmpJStatsPktOutSeqDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets arrived out of sequence in the
direction of destination-to-source."
::= { rttMonIcmpJitterStatsEntry 37 }
rttMonIcmpJitterStatsPktSkippeds OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that are skipped per operation because
the router could not send the packet out."
::= { rttMonIcmpJitterStatsEntry 38 }
rttMonIcmpJitterStatsErrors OBJECT-TYPE
SYNTAX Counter32
UNITS "errors"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a ICMP jitter operation could not
be initiated because of an internal error"
::= { rttMonIcmpJitterStatsEntry 39 }
rttMonIcmpJitterStatsBusies OBJECT-TYPE
SYNTAX Counter32
UNITS "busies"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of occasions when a ICMP jitter operation could not
be initiated because a previous ICMP jitter operation has not
been completed."
::= { rttMonIcmpJitterStatsEntry 40 }
rttMonIcmpJitterStatsOWSumSDs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from source to destination."
::= { rttMonIcmpJitterStatsEntry 41 }
rttMonIcmpJStatsOWSum2SDLows OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from source to
destination (low order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 42 }
rttMonIcmpJStatsOWSum2SDHighs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from source to
destination (high order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 43 }
rttMonIcmpJitterStatsOWMinSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from source to
destination."
::= { rttMonIcmpJitterStatsEntry 44 }
rttMonIcmpJitterStatsOWMaxSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from source to
destination."
::= { rttMonIcmpJitterStatsEntry 45 }
rttMonIcmpJitterStatsOWSumDSes OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of one way trip time from destination to source."
::= { rttMonIcmpJitterStatsEntry 46 }
rttMonIcmpJStatsOWSum2DSLows OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from destination
to source (low order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 47 }
rttMonIcmpJStatsOWSum2DSHighs OBJECT-TYPE
SYNTAX Counter32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The sum of squares of one way trip time from destination
to source (high order 32 bits)."
::= { rttMonIcmpJitterStatsEntry 48 }
rttMonIcmpJitterStatsOWMinDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum of all one way trip time from destination
to source."
::= { rttMonIcmpJitterStatsEntry 49 }
rttMonIcmpJitterStatsOWMaxDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum of all one way trip time from destination
to source."
::= { rttMonIcmpJitterStatsEntry 50 }
rttMonIcmpJitterStatsNumOWs OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of one way trip time that are successfully
measured."
::= { rttMonIcmpJitterStatsEntry 51 }
rttMonIcmpJitterStatsAvgJ OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values for source-to-destination and
destination-to-source direction."
::= { rttMonIcmpJitterStatsEntry 52 }
rttMonIcmpJitterStatsAvgJSD OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values in source-to-destination direction."
::= { rttMonIcmpJitterStatsEntry 53 }
rttMonIcmpJitterStatsAvgJDS OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The average of positive and negative jitter
values in destination-to-source direction."
::= { rttMonIcmpJitterStatsEntry 54 }
rttMonIcmpJitterMinSucPktLoss OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The minimum number of packets that are dropped
successively."
::= { rttMonIcmpJitterStatsEntry 55 }
rttMonIcmpJitterMaxSucPktLoss OBJECT-TYPE
SYNTAX Gauge32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of packets that are dropped
successively."
::= { rttMonIcmpJitterStatsEntry 56 }
rttMonIcmpJitterStatsIAJOut OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inter-arrival jitter (RFC 1889) at responder"
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { rttMonIcmpJitterStatsEntry 57 }
rttMonIcmpJitterStatsIAJIn OBJECT-TYPE
SYNTAX Gauge32
UNITS "milliseconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Inter-arrival jitter (RFC 1889) at sender"
REFERENCE
"Refer to the following documents for the definition:
RFC 1889, Section 6.3.1"
::= { rttMonIcmpJitterStatsEntry 58 }
rttMonIcmpJitterStatsPktLateAs OBJECT-TYPE
SYNTAX Counter32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets that arrived after the timeout."
::= { rttMonIcmpJitterStatsEntry 59 }
--
-- Conformance Information
--
ciscoRttMonIcmpMIBConform OBJECT IDENTIFIER
::= { ciscoRttMonIcmpMIB 2 }
ciscoRttMonIcmpCompliances OBJECT IDENTIFIER
::= { ciscoRttMonIcmpMIBConform 1 }
ciscoRttMonIcmpMIBGroups OBJECT IDENTIFIER
::= { ciscoRttMonIcmpMIBConform 2 }
ciscoRttMonIcmpJitterCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for
(1) ICMP Jitter operation and statistics"
MODULE
MANDATORY-GROUPS {
ciscoRttMonIcmpJitterGroup
}
::= { ciscoRttMonIcmpCompliances 1 }
ciscoRttMonIcmpJitterGroup OBJECT-GROUP
OBJECTS {
rttMonLatestIcmpJitterNumRTT,
rttMonLatestIcmpJitterRTTSum,
rttMonLatestIcmpJitterRTTSum2,
rttMonLatestIcmpJitterRTTMin,
rttMonLatestIcmpJitterRTTMax,
rttMonLatestIcmpJitterMinPosSD,
rttMonLatestIcmpJitterMaxPosSD,
rttMonLatestIcmpJitterNumPosSD,
rttMonLatestIcmpJitterSumPosSD,
rttMonLatestIcmpJitterSum2PosSD,
rttMonLatestIcmpJitterMinNegSD,
rttMonLatestIcmpJitterMaxNegSD,
rttMonLatestIcmpJitterNumNegSD,
rttMonLatestIcmpJitterSumNegSD,
rttMonLatestIcmpJitterSum2NegSD,
rttMonLatestIcmpJitterMinPosDS,
rttMonLatestIcmpJitterMaxPosDS,
rttMonLatestIcmpJitterNumPosDS,
rttMonLatestIcmpJitterSumPosDS,
rttMonLatestIcmpJitterSum2PosDS,
rttMonLatestIcmpJitterMinNegDS,
rttMonLatestIcmpJitterMaxNegDS,
rttMonLatestIcmpJitterNumNegDS,
rttMonLatestIcmpJitterSumNegDS,
rttMonLatestIcmpJitterSum2NegDS,
rttMonLatestIcmpJitterPktLoss,
rttMonLatestIcmpJPktOutSeqBoth,
rttMonLatestIcmpJPktOutSeqSD,
rttMonLatestIcmpJPktOutSeqDS,
rttMonLatestIcmpJitterPktSkipped,
rttMonLatestIcmpJitterSense,
rttMonLatestIcmpJitterPktLateA,
rttMonLatestIcmpJitterMinSucPktL,
rttMonLatestIcmpJitterMaxSucPktL,
rttMonLatestIcmpJitterOWSumSD,
rttMonLatestIcmpJitterOWSum2SD ,
rttMonLatestIcmpJitterOWMinSD,
rttMonLatestIcmpJitterOWMaxSD,
rttMonLatestIcmpJitterOWSumDS,
rttMonLatestIcmpJitterOWSum2DS,
rttMonLatestIcmpJitterOWMinDS,
rttMonLatestIcmpJitterOWMaxDS,
rttMonLatestIcmpJitterNumOW,
rttMonLatestIcmpJitterAvgJitter,
rttMonLatestIcmpJitterAvgSDJ,
rttMonLatestIcmpJitterAvgDSJ,
rttMonLatestIcmpJitterOWAvgSD,
rttMonLatestIcmpJitterOWAvgDS,
rttMonLatestIcmpJitterIAJOut,
rttMonLatestIcmpJitterIAJIn,
rttMonIcmpJitterStatsCompletions,
rttMonIcmpJStatsOverThresholds,
rttMonIcmpJitterStatsNumRTTs,
rttMonIcmpJitterStatsRTTSums,
rttMonIcmpJStatsRTTSum2Lows,
rttMonIcmpJStatsRTTSum2Highs,
rttMonIcmpJitterStatsRTTMin,
rttMonIcmpJitterStatsRTTMax,
rttMonIcmpJitterStatsMinPosSD,
rttMonIcmpJitterStatsMaxPosSD,
rttMonIcmpJitterStatsNumPosSDs,
rttMonIcmpJitterStatsSumPosSDs,
rttMonIcmpJStatsSum2PosSDLows,
rttMonIcmpJStatsSum2PosSDHighs,
rttMonIcmpJitterStatsMinNegSD,
rttMonIcmpJitterStatsMaxNegSD,
rttMonIcmpJitterStatsNumNegSDs,
rttMonIcmpJitterStatsSumNegSDs,
rttMonIcmpJStatsSum2NegSDLows,
rttMonIcmpJStatsSum2NegSDHighs,
rttMonIcmpJitterStatsMinPosDS,
rttMonIcmpJitterStatsMaxPosDS,
rttMonIcmpJitterStatsNumPosDSes,
rttMonIcmpJitterStatsSumPosDSes,
rttMonIcmpJStatsSum2PosDSLows,
rttMonIcmpJStatsSum2PosDSHighs,
rttMonIcmpJitterStatsMinNegDS,
rttMonIcmpJitterStatsMaxNegDS,
rttMonIcmpJitterStatsNumNegDSes,
rttMonIcmpJitterStatsSumNegDSes,
rttMonIcmpJStatsSum2NegDSLows,
rttMonIcmpJStatsSum2NegDSHighs,
rttMonIcmpJitterStatsPktLosses,
rttMonIcmpJStatsPktOutSeqBoth,
rttMonIcmpJStatsPktOutSeqSDs,
rttMonIcmpJStatsPktOutSeqDSes,
rttMonIcmpJitterStatsPktSkippeds,
rttMonIcmpJitterStatsErrors,
rttMonIcmpJitterStatsBusies,
rttMonIcmpJitterStatsOWSumSDs,
rttMonIcmpJStatsOWSum2SDLows,
rttMonIcmpJStatsOWSum2SDHighs,
rttMonIcmpJitterStatsOWMinSD,
rttMonIcmpJitterStatsOWMaxSD,
rttMonIcmpJitterStatsOWSumDSes,
rttMonIcmpJStatsOWSum2DSLows,
rttMonIcmpJStatsOWSum2DSHighs,
rttMonIcmpJitterStatsOWMinDS,
rttMonIcmpJitterStatsOWMaxDS,
rttMonIcmpJitterStatsNumOWs,
rttMonIcmpJitterStatsAvgJ,
rttMonIcmpJitterStatsAvgJSD,
rttMonIcmpJitterStatsAvgJDS,
rttMonIcmpJitterMinSucPktLoss,
rttMonIcmpJitterMaxSucPktLoss,
rttMonIcmpJitterStatsIAJOut,
rttMonIcmpJitterStatsIAJIn,
rttMonIcmpJitterStatsPktLateAs
}
STATUS current
DESCRIPTION
"A collection of statistics objects related to
ICMP Jitter Probe."
::= {ciscoRttMonIcmpMIBGroups 1 }
END
Reference in New Issue View Git Blame Copy Permalink