MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-RSCN-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

754 lines
23 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-RSCN-MIB.my: Registered State Change Notificaton (RSCN) Mib
--
-- September 2002, H K Vivek
--
-- Copyright (c) 2002-2004, 2005, 2006, 2009 by cisco Systems Inc.
-- All rights reserved.
--
-- *********************************************************************
CISCO-RSCN-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
NOTIFICATION-TYPE,
Counter32,
Integer32,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
OBJECT-GROUP,
NOTIFICATION-GROUP
FROM SNMPv2-CONF
TruthValue
FROM SNMPv2-TC
FcAddressId
FROM CISCO-ST-TC
vsanIndex
FROM CISCO-VSAN-MIB
FcGs3RejectReasonCode
FROM CISCO-NS-MIB
ciscoMgmt
FROM CISCO-SMI;
ciscoRscnMIB MODULE-IDENTITY
LAST-UPDATED "200809010000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"The MIB module for the management of the Fibre
Channel's Registered State Change Notification
(RSCN) functionality, which is specified by
FC-FLA and FC-FS.
GLOSSARY :
RSCN - Registered State Change Notification.
RSCN Notifications are sent to Nx_ports
and other switches to notify that an event
has occured.
SW_RSCN - Switch Registered State Change Notification.
SW_RSCN Notifications are sent to neighbouring
switches in a fabric to notify that an
event has occured.
ELS - Extended Link Service.
RSCN Software module uses ELS frame formats
to send RSCN messages.
ILS - Inter Link Service.
RSCN Software module uses ILS frame formats
to send SW-RSCN messages."
REVISION "200809010000Z"
DESCRIPTION
"modified rscnEventTov range from '1..2000' to '0.2000'."
REVISION "200608170000Z"
DESCRIPTION
"Added following notifications
-rscnIlsRxRejectReqNotify
-rscnElsRxRejectReqNotify
Added 2 new notification control objects:
- rscnIlsRxRejectReqNotifyEnable
- rscnElsRxRejectReqNotifyEnable
Added rscnNotifyControlGroupSup1 OBJECT-GROUP
Added rscnRejectNotifyGroup NOTIFICATION-GROUP
Added rscnMIBComplianceRev3 MODULE-COMPLIANCE"
REVISION "200505060000Z"
DESCRIPTION
"Added rscnEventTovTable."
REVISION "200310160000Z"
DESCRIPTION
"Added rscnMultiPidTable."
REVISION "200209200000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 292 }
ciscoRscnMIBObjects OBJECT IDENTIFIER
::= { ciscoRscnMIB 1 }
rscnMIBConformance OBJECT IDENTIFIER
::= { ciscoRscnMIB 2 }
rscnConfiguration OBJECT IDENTIFIER
::= { ciscoRscnMIBObjects 1 }
rscnStats OBJECT IDENTIFIER
::= { ciscoRscnMIBObjects 2 }
rscnInformation OBJECT IDENTIFIER
::= { ciscoRscnMIBObjects 3 }
rscnNotification OBJECT IDENTIFIER
::= { ciscoRscnMIBObjects 4 }
rscnNotifications OBJECT IDENTIFIER
::= { rscnNotification 0 }
-- State Change Registration Table
rscnScrNumber OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Nx_Ports currently registered
to receive RSCNs."
::= { rscnConfiguration 1 }
rscnScrTable OBJECT-TYPE
SYNTAX SEQUENCE OF RscnScrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of Nx_Ports that have registered to
receive RSCNs on all VSANs configured on the
local switch."
::= { rscnConfiguration 2 }
rscnScrEntry OBJECT-TYPE
SYNTAX RscnScrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) containing information
about one Nx_Port which has registered to receive
RSCNs on the VSAN indicated by vsanIndex."
INDEX {
vsanIndex,
rscnScrFcId
}
::= { rscnScrTable 1 }
RscnScrEntry ::= SEQUENCE {
rscnScrFcId FcAddressId,
rscnScrRegType INTEGER
}
rscnScrFcId OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Fibre Channel Identifier (FC-ID) of the
subscribing Nx_Port."
::= { rscnScrEntry 1 }
rscnScrRegType OBJECT-TYPE
SYNTAX INTEGER {
fromFabricCtrlr(1),
fromNxPort(2),
fromBoth(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the type of registration
desired by the subscriber.
'fromFabricCtrlr' indicates RSCNs generated by the
Fabric Controller.
'fromNxPort' indicates RSCNs generated by
Nx_Ports.
'fromBoth' indicates RSCNs generated by Fabric
Controller and Nx_Ports."
::= { rscnScrEntry 2 }
-- Statistics
rscnScrTotalRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SCRs rejected
across all VSANs by the local switch."
::= { rscnStats 1 }
rscnRscnReqTotalRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RSCN requests rejected
across all VSANs by the local switch."
::= { rscnStats 2 }
rscnSwRscnReqTotalRejects OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of SW_RSCN requests rejected
across all VSANs by the local switch."
::= { rscnStats 3 }
rscnStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RscnStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The statistics related to the RSCN module. The
statistics are maintained per VSAN."
::= { rscnStats 4 }
rscnStatsEntry OBJECT-TYPE
SYNTAX RscnStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table."
INDEX { vsanIndex }
::= { rscnStatsTable 1 }
RscnStatsEntry ::= SEQUENCE {
rscnRxScrs Counter32,
rscnRxRscns Counter32,
rscnTxRscns Counter32,
rscnRxSwRscns Counter32,
rscnTxSwRscns Counter32,
rscnScrRej Counter32,
rscnRscnReqRej Counter32,
rscnSwRscnReqRej Counter32
}
rscnRxScrs OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SCRs received from Nx_Ports
on this VSAN."
::= { rscnStatsEntry 1 }
rscnRxRscns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RSCNs from Nx_Ports received on
this VSAN."
::= { rscnStatsEntry 2 }
rscnTxRscns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of RSCNs transmitted on this
VSAN."
::= { rscnStatsEntry 3 }
rscnRxSwRscns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Inter-Switch Registered State
Change Notifications (SW_RSCN) received on this
VSAN from other switches."
::= { rscnStatsEntry 4 }
rscnTxSwRscns OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Inter-Switch Registered State
Change Notifications (SW_RSCN) transmitted
on this VSAN to other switches."
::= { rscnStatsEntry 5 }
rscnScrRej OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SCR rejected on this VSAN."
::= { rscnStatsEntry 6 }
rscnRscnReqRej OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of RSCN requests rejected on this VSAN."
::= { rscnStatsEntry 7 }
rscnSwRscnReqRej OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of SW_RSCN requests rejected on this VSAN."
::= { rscnStatsEntry 8 }
-- Notification Information
rscnIlsRejReasonCode OBJECT-TYPE
SYNTAX FcGs3RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code corresponding to an ILS
request rejection. This object contains the
reason code corresponding to the most recent
SCR or RSCN request rejection by the RSCN
module."
::= { rscnInformation 1 }
rscnElsRejReasonCode OBJECT-TYPE
SYNTAX FcGs3RejectReasonCode
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason code corresponding to an ELS
request rejection. This object contains the
reason code corresponding the most recent
SW_RSCN request rejection by the RSCN module."
::= { rscnInformation 2 }
-- Notification control objects
rscnIlsRejectReqNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the RSCN module should
generate 'rscnIlsRejectReqNotify' notifications.
If value of this object is 'true', then the
notification is generated when a SW_RSCN request
is rejected.
If it is 'false', the notification is not generated."
DEFVAL { false }
::= { rscnConfiguration 3 }
rscnElsRejectReqNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the RSCN module should
generate 'rscnElsRejectReqNotify' notifications.
If value of this object is 'true', then the
notification is generated when a SCR or RSCN request
is rejected.
If it is 'false', the notification is not generated."
DEFVAL { false }
::= { rscnConfiguration 4 }
rscnNotifyFcId OBJECT-TYPE
SYNTAX FcAddressId
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The FC-ID of an Nx_Port.
This object is to be used in the notifications:
rscnElsRejectReqNotify, rscnIlsRejectReqNotify,
rscnElsRxRejectReqNotify and rscnIlsRxRejectReqNotify.
This object is defined since the rscnScrFcId
object in the rscnScrTable is not-accessible."
::= { rscnConfiguration 5 }
rscnMultiPidTable OBJECT-TYPE
SYNTAX SEQUENCE OF RscnMultiPidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration information
for multi-pid option for all VSANs on the local
device."
::= { rscnConfiguration 6 }
rscnMultiPidEntry OBJECT-TYPE
SYNTAX RscnMultiPidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table."
INDEX { vsanIndex }
::= { rscnMultiPidTable 1 }
RscnMultiPidEntry ::= SEQUENCE {
rscnMultiPidEnable TruthValue
}
rscnMultiPidEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies whether the multi-pid
option is enabled on this VSAN.
If this object is set to 'true', then the
multi-pid option is enabled. If this object is
set to 'false, then the multi-pid option is
disabled.
If the multi-pid option is enabled, then RSCNs
generated to the registered Nx ports may contain
more than one affected port ID. By enabling this
option, the number of RSCNs generated can be
reduced."
DEFVAL { false }
::= { rscnMultiPidEntry 1 }
rscnEventTovTable OBJECT-TYPE
SYNTAX SEQUENCE OF RscnEventTovEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the configuration information
for Event Time Out Value option for all VSANs on
the local device. The Event TOV value is used to
send the coalesced RSCNs to the registered user."
::= { rscnConfiguration 7 }
rscnEventTovEntry OBJECT-TYPE
SYNTAX RscnEventTovEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry (conceptual row) in this table represents
the Event Time out value on a VSAN."
INDEX { vsanIndex }
::= { rscnEventTovTable 1 }
RscnEventTovEntry ::= SEQUENCE {
rscnEventTov Unsigned32
}
rscnEventTov OBJECT-TYPE
SYNTAX Unsigned32 (0..2000)
UNITS "milli-secs"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies the event time-out value
configured for the VSAN. This timeout value
corresponds to the coalescing timeout.
This object is used to merge a number of RSCNs
into a single frame and send them out when
timer expires. The value of zero indicates that
frames will not be coalesced."
DEFVAL { 2000 }
::= { rscnEventTovEntry 1 }
rscnIlsRxRejectReqNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the RSCN module should
generate 'rscnIlsRxRejectReqNotify' notifications.
If value of this object is 'true', then
the notification is generated when a SW_RSCN
that is rejected by another device is received
on the local device.
If it is 'false', the notification is not generated."
DEFVAL { false }
::= { rscnConfiguration 8 }
rscnElsRxRejectReqNotifyEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies if the RSCN module should
generate 'rscnElsRxRejectReqNotify' notifications.
If value of this object is 'true', then the
notification is generated when a RSCN request that is
rejected by another device is received on the local
device.
If it is 'false', the notification is not generated."
DEFVAL { false }
::= { rscnConfiguration 9 }
-- Notifications
rscnElsRejectReqNotify NOTIFICATION-TYPE
OBJECTS {
rscnElsRejReasonCode,
rscnNotifyFcId
}
STATUS current
DESCRIPTION
"This notification is generated by the RSCN module
on this switch whenever it rejects a SCR or RSCN
request.
The rscnScrFcId object indicates the FC-ID of the
sender of the request that was rejected."
::= { rscnNotifications 1 }
rscnIlsRejectReqNotify NOTIFICATION-TYPE
OBJECTS {
rscnIlsRejReasonCode,
rscnNotifyFcId
}
STATUS current
DESCRIPTION
"This notification is generated by the RSCN module
on this switch whenever it rejects a SW_RSCN
request.
The rscnScrFcId object contains the FC-ID of the
sender of the request that was rejected."
::= { rscnNotifications 2 }
rscnElsRxRejectReqNotify NOTIFICATION-TYPE
OBJECTS {
rscnElsRejReasonCode,
rscnNotifyFcId
}
STATUS current
DESCRIPTION
"This notification is generated by the RSCN module
on this switch whenever it receives a rejected
RSCN request.
The rscnScrFcId object indicates the FC-ID of the
sender where the request was rejected."
::= { rscnNotifications 3 }
rscnIlsRxRejectReqNotify NOTIFICATION-TYPE
OBJECTS {
rscnIlsRejReasonCode,
rscnNotifyFcId
}
STATUS current
DESCRIPTION
"This notification is generated by the RSCN module
on this switch whenever it receives a rejected
SW_RSCN request.
The rscnScrFcId object contains the FC-ID of the
sender where the request was rejected."
::= { rscnNotifications 4 }
-- Conformance
rscnMIBCompliances OBJECT IDENTIFIER
::= { rscnMIBConformance 1 }
rscnMIBGroups OBJECT IDENTIFIER
::= { rscnMIBConformance 2 }
rscnMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement RSCN feature."
MODULE -- this module
MANDATORY-GROUPS {
rscnConfigGroup,
rscnStatsGroup,
rscnNotifyControlGroup,
rscnNotifyGroup
}
::= { rscnMIBCompliances 1 }
rscnMIBComplianceRev1 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement RSCN feature."
MODULE -- this module
MANDATORY-GROUPS {
rscnConfigGroupRev1,
rscnStatsGroup,
rscnNotifyControlGroup,
rscnNotifyGroup
}
::= { rscnMIBCompliances 2 }
rscnMIBComplianceRev2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which
implement RSCN feature."
MODULE -- this module
MANDATORY-GROUPS {
rscnConfigGroupRev1,
rscnStatsGroup,
rscnNotifyControlGroup,
rscnNotifyGroup,
rscnConfigGroupRev1Sup1
}
::= { rscnMIBCompliances 3 }
rscnMIBComplianceRev3 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which
implement RSCN feature."
MODULE -- this module
MANDATORY-GROUPS {
rscnConfigGroupRev1,
rscnStatsGroup,
rscnNotifyControlGroup,
rscnNotifyGroup,
rscnConfigGroupRev1Sup1,
rscnRejectNotifyGroup,
rscnNotifyControlGroupSup1
}
::= { rscnMIBCompliances 4 }
-- Units of conformance
rscnConfigGroup OBJECT-GROUP
OBJECTS {
rscnScrNumber,
rscnScrRegType,
rscnNotifyFcId
}
STATUS deprecated
DESCRIPTION
"A collection of objects for configuring
and displaying SCR entries."
::= { rscnMIBGroups 1 }
rscnStatsGroup OBJECT-GROUP
OBJECTS {
rscnScrTotalRejects,
rscnRscnReqTotalRejects,
rscnSwRscnReqTotalRejects,
rscnRxScrs,
rscnRxRscns,
rscnTxRscns,
rscnRxSwRscns,
rscnTxSwRscns,
rscnScrRej,
rscnRscnReqRej,
rscnSwRscnReqRej
}
STATUS current
DESCRIPTION
"A collection of objects for displaying
RSCN statistics."
::= { rscnMIBGroups 2 }
rscnNotifyControlGroup OBJECT-GROUP
OBJECTS {
rscnIlsRejReasonCode,
rscnElsRejReasonCode,
rscnIlsRejectReqNotifyEnable,
rscnElsRejectReqNotifyEnable
}
STATUS current
DESCRIPTION
"A collection of notification control and
notification information objects."
::= { rscnMIBGroups 3 }
rscnNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
rscnIlsRejectReqNotify,
rscnElsRejectReqNotify
}
STATUS current
DESCRIPTION
"A collection of notifications for monitoring
ILS and ELS request rejection by the RSCN
module."
::= { rscnMIBGroups 4 }
rscnConfigGroupRev1 OBJECT-GROUP
OBJECTS {
rscnScrNumber,
rscnScrRegType,
rscnNotifyFcId,
rscnMultiPidEnable
}
STATUS current
DESCRIPTION
"A collection of objects for configuring
and displaying SCR entries and multi-pid
option."
::= { rscnMIBGroups 5 }
rscnConfigGroupRev1Sup1 OBJECT-GROUP
OBJECTS { rscnEventTov }
STATUS current
DESCRIPTION
"A collection of object(s) for configuring
the Event time out option."
::= { rscnMIBGroups 6 }
rscnRejectNotifyGroup NOTIFICATION-GROUP
NOTIFICATIONS {
rscnIlsRxRejectReqNotify,
rscnElsRxRejectReqNotify
}
STATUS current
DESCRIPTION
"A collection of notifications for monitoring
ILS and ELS request rejection by other switches/
devices."
::= { rscnMIBGroups 7 }
rscnNotifyControlGroupSup1 OBJECT-GROUP
OBJECTS {
rscnIlsRxRejectReqNotifyEnable,
rscnElsRxRejectReqNotifyEnable
}
STATUS current
DESCRIPTION
"A collection of notification control objects."
::= { rscnMIBGroups 8 }
END
Reference in New Issue View Git Blame Copy Permalink