MrMeeb/snmp_mib_archive
1
0
Fork 0
mirror of https://github.com/hsnodgrass/snmp_mib_archive.git synced 2025-04-17 16:03:04 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
snmp_mib_archive/CISCO-RADIUS-MIB.my
Heston Snodgrass 89bf4b016e initial commit
2016-12-15 15:03:18 -07:00

1266 lines
45 KiB
Plaintext
Raw Blame History

-- *********************************************************************
-- CISCO-RADIUS-MIB.my: Radius Configuration MIB
--
-- October 2002, Vinay Gaonkar
-- March 2004, Binh Le
-- Jan 2009, Paari Elangovan
--
-- Copyright (c) 2002-2009 by cisco Systems, Inc.
--
-- All rights reserved.
--
-- *******************************************************************
CISCO-RADIUS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
NOTIFICATION-TYPE,
OBJECT-TYPE,
Unsigned32
FROM SNMPv2-SMI
MODULE-COMPLIANCE,
NOTIFICATION-GROUP,
OBJECT-GROUP
FROM SNMPv2-CONF
RowStatus,
TEXTUAL-CONVENTION,
TruthValue
FROM SNMPv2-TC
InetAddressType,
InetAddress
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
TimeIntervalMin,
TimeIntervalSec,
CiscoPort
FROM CISCO-TC
ciscoMgmt
FROM CISCO-SMI;
ciscoRadiusMIB MODULE-IDENTITY
LAST-UPDATED "200902060000Z"
ORGANIZATION "Cisco Systems Inc."
CONTACT-INFO
"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553 -NETS
E-mail: cs-san@cisco.com"
DESCRIPTION
"MIB module for monitoring and configuring
authentication and logging services using RADIUS
(Remote Authentication Dial In User Service) related
objects.
The RADIUS (RFC2865) framework consists of clients and
servers. A client is responsible for passing user
information to designated RADIUS servers, and then
acting on the response which is returned.
RADIUS server is responsible for receiving user
connection requests, authenticating the user, and then
returning all configuration information necessary for
the client to deliver service to the user.
This MIB module also contains objects for
enabling/disabling telnet and SSH (Secure Shell)
authentication. Secure Shell is program which is used
to log into another machine over a secured session."
REVISION "200902060000Z"
DESCRIPTION
"The following objects have been added
[1] crRadiusServerRTTThldNorm
[2] crRadiusServerRTTThldHi
[3] crRadiusServerRetransThldNorm
[4] crRadiusServerRetransThldHi
[5] crRadiusServerRTTNormNotifEnable
[6] crRadiusServerRTTHiNotifEnable
[7] crRadiusServerRetransNormNotifEnable
[8] crRadiusServerRetransHiNotifEnable
The following notifications have been added
[1] crRadiusServerRTTNormNotif
[2] crRadiusServerRTTHiNotif
[3] crRadiusServerRetransNormNotif
[4] crRadiusServerRetransHiNotif
The following object-groups have been added
[1] crmRadiusServerNotifGroup
[2] crmNotificationControlGroup
[3] crmRadiusServerNotifCntlGroup
The compliance statement ciscoRadiusMIBCompliance3 has been
deprecated by ciscoRadiusMIBCompliance4."
REVISION "200707220000Z"
DESCRIPTION
"Added support of crmRadiusKeepAliveUserGroup."
REVISION "200701030000Z"
DESCRIPTION
"Added support of
crmKeepAliveGroup,
crmAutoInitializeConfigGroup, and
crmAttributesGroup2."
REVISION "200403030000Z"
DESCRIPTION
"Added support of
crRadiusFramedIpAddrIncluded,
crRadiusVlanAssignmentEnabled,
crVlanGroupTable.
Added http(2) bit to crRadiusLoginAuthentication."
REVISION "200211090000Z"
DESCRIPTION
"Removed the TC CiscoRadiusAuthKeyType.
Added new TC CiscoRadiusAuthKey.
Removed the objects crRadiusAuthKeyType and
crRadiusServerKeyType.
Changed the SYNTAX of objects crRadiusAuthKey and
crRadiusServerKey."
REVISION "200210080000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { ciscoMgmt 288 }
ciscoRadiusMIBObjects OBJECT IDENTIFIER
::= { ciscoRadiusMIB 1 }
ciscoRadiusMIBConformance OBJECT IDENTIFIER
::= { ciscoRadiusMIB 2 }
crRadiusGenericConfig OBJECT IDENTIFIER
::= { ciscoRadiusMIBObjects 1 }
crRadiusServerConfig OBJECT IDENTIFIER
::= { ciscoRadiusMIBObjects 2 }
crRadiusAttributesConfig OBJECT IDENTIFIER
::= { ciscoRadiusMIBObjects 3 }
crRadiusVlanConfigGroup OBJECT IDENTIFIER
::= { ciscoRadiusMIBObjects 4 }
crRadiusKeepAliveConfig OBJECT IDENTIFIER
::= { ciscoRadiusMIBObjects 5 }
crRadiusServerNotifCntl OBJECT IDENTIFIER
::= { ciscoRadiusMIBObjects 6 }
ciscoRadiusMIBNotifications OBJECT IDENTIFIER
::= { ciscoRadiusMIB 3 }
-- Textual Conventions
CiscoRadiusAuthKey ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The authentication key of a radius server.
The first octet of this object contains the the type of key.
The octets following the first octet contain the key.
If the value of the first object is ascii value 'p', then the
key is in plain text.
If the value of first object is ascii value 'e', the key is
encrypted.
Note that this object has same format as TC DisplayString."
SYNTAX OCTET STRING (SIZE (0..65))
CiscoRadiusRoundTripTimePercent ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"This textual convention represents a round-trip time per
session expressed as a percent of the round-trip time
configured for the RADIUS server."
SYNTAX Unsigned32 (1..100)
CiscoRadiusRetransPercent ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-2"
STATUS current
DESCRIPTION
"This textual convention represents the number of retransmisions
per session expressed as a percent of the retransmissions
configured for the RADIUS server."
SYNTAX Unsigned32 (1..100)
-- the RADIUS Configuration group
crRadiusLoginAuthentication OBJECT-TYPE
SYNTAX BITS {
telnet(0),
console(1),
http(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The login authentication using RADIUS feature is enabled for
telnet/SSH sessions if the 'telnet (0) ' bit is set, and
disabled if this bit is reset.
The login authentication using RADIUS feature is enabled for
console sessions if the 'console (1) ' bit is set, and
disabled if this bit is reset.
The login authentication using RADIUS feature is enabled for
remote web sessions if the 'http (2) ' bit is set, and
disabled if this bit is reset."
DEFVAL { { } }
::= { crRadiusGenericConfig 1 }
crRadiusDeadtime OBJECT-TYPE
SYNTAX TimeIntervalMin (0..1440)
UNITS "minutes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Indicates the length of time in minutes that the system will
mark the server dead when a RADIUS server does not respond to
an authentication request. During the interval of the dead
time, any authentication request that comes up would not be
sent to that RADIUS server that was marked as dead. The
default value of 0 means that the RADIUS servers will not be
marked dead if they do not respond."
DEFVAL { 0 }
::= { crRadiusGenericConfig 2 }
crRadiusAuthKey OBJECT-TYPE
SYNTAX CiscoRadiusAuthKey
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The key used in encrypting the packets passed between the
RADIUS server and the client. This key must match the one
configured on the server.
A zero-length string is always returned when this object is
read."
::= { crRadiusGenericConfig 3 }
crRadiusTimeout OBJECT-TYPE
SYNTAX TimeIntervalSec (1..1000)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the time in seconds between retransmissions to
the RADIUS server."
DEFVAL { 1 }
::= { crRadiusGenericConfig 4 }
crRadiusRetransmits OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITS "retransmits"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The additional number of times the RADIUS server should be
tried by the RADIUS client before giving up on the server."
DEFVAL { 1 }
::= { crRadiusGenericConfig 5 }
crRadiusAccountingLogMaxSize OBJECT-TYPE
SYNTAX Unsigned32 (0..30000)
UNITS "bytes"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The maximum size of the accounting log file in bytes.
The log file is stored on local persistent storage at the
device. If the size is set to a smaller value than the
existing one, then smaller log will be available for view
by the user."
DEFVAL { 30000 }
::= { crRadiusGenericConfig 6 }
crRadiusAccountingMethod OBJECT-TYPE
SYNTAX BITS {
radius(0),
local(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The accounting method on the device. If bit 0
is set, the accounting method is RADIUS. If bit 1
is set, then the accounting method is local. It is
possible for the user to set both the bits so that
both the RADIUS as well as local accounting methods
are used. It is also possible to set none of the
methods; in this case the switch will not do any
accounting."
::= { crRadiusGenericConfig 7 }
crRadiusFramedIpAddrIncluded OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if Access-Request packets will include
Framed-IP-Address attributes."
::= { crRadiusAttributesConfig 1 }
crRadiusFramedMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the Framed-MTU attribute value to be sent to
the RADIUS server."
REFERENCE "RFC2865: Section 5.12"
::= { crRadiusAttributesConfig 2 }
crRadiusServerTableMaxEntries OBJECT-TYPE
SYNTAX Unsigned32 (0..65536)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The maximum number of entries that the agent supports in the
crRadiusServerTable."
::= { crRadiusServerConfig 1 }
-- crRadiusServerTable
crRadiusServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CrRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists RADIUS servers."
::= { crRadiusServerConfig 2 }
crRadiusServerEntry OBJECT-TYPE
SYNTAX CrRadiusServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A RADIUS server table entry.
Users can add/delete entries in this table using object
'crRadiusServerRowStatus'.
An entry cannot be created until following objects are
instantiated :
- crRadiusServerAddrType
- crRadiusServerAddr
Also, following objects cannot be modified when
'crRadiusServerRowStatus' is 'active' :
- crRadiusServerAddrType
- crRadiusServerAddr
To modify above objects, the entry must be deleted and
re-created with new values of above objects.
If 'crRadiusServerKey' is not instantiated or is a
zero-length string, then value of the object
'crRadiusAuthkey' is used as the key to communicate with the
corresponding RADIUS server."
INDEX { crRadiusServerIndex }
::= { crRadiusServerTable 1 }
CrRadiusServerEntry ::= SEQUENCE {
crRadiusServerIndex Unsigned32,
crRadiusServerAddrType InetAddressType,
crRadiusServerAddr InetAddress,
crRadiusServerAuthPort CiscoPort,
crRadiusServerAcctPort CiscoPort,
crRadiusServerKey CiscoRadiusAuthKey,
crRadiusServerType INTEGER,
crRadiusServerMode INTEGER,
crRadiusServerRowStatus RowStatus,
crRadiusServerRTTThldNorm CiscoRadiusRoundTripTimePercent,
crRadiusServerRTTThldHi CiscoRadiusRoundTripTimePercent,
crRadiusServerRetransThldNorm CiscoRadiusRetransPercent,
crRadiusServerRetransThldHi CiscoRadiusRetransPercent
}
crRadiusServerIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An arbitrary integer value, greater than zero, and less than
and equal to crRadiusServerTableMaxEntries, which identifies
a RADIUS Server in this table.
The value of this object must be persistent across
reboots/reinitialization of the device."
::= { crRadiusServerEntry 1 }
crRadiusServerAddrType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of address of the RADIUS Server as specified by
object 'crRadiusServerAddr'."
DEFVAL { ipv4 }
::= { crRadiusServerEntry 2 }
crRadiusServerAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The address of the RADIUS Server."
::= { crRadiusServerEntry 3 }
crRadiusServerAuthPort OBJECT-TYPE
SYNTAX CiscoPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the destination UDP port number to which RADIUS
authentication messages should be sent. The RADIUS server
will not be used for authentication if this port number is
0."
DEFVAL { 1812 }
::= { crRadiusServerEntry 4 }
crRadiusServerAcctPort OBJECT-TYPE
SYNTAX CiscoPort
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This is the destination UDP port number to which RADIUS
accounting messages should be sent."
DEFVAL { 1813 }
::= { crRadiusServerEntry 5 }
crRadiusServerKey OBJECT-TYPE
SYNTAX CiscoRadiusAuthKey
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The key used in encrypting the packets passed between the
RADIUS server and the client. This key must match the one
configured on the server.
A zero-length string is always returned when this object is
read.
Note that if this object is a zero length string, then
'crRadiusAuthKey' is used as the key for this server."
DEFVAL { '00000000'H }
::= { crRadiusServerEntry 6 }
crRadiusServerType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
primary(2)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of the RADIUS server.
other (1), - a lower priority server
primary (2) - the primary server which is tried first
by the RADIUS client."
DEFVAL { other }
::= { crRadiusServerEntry 7 }
crRadiusServerMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
authAndAcct(2),
authOnly(3),
acctOnly(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Mode of the RADIUS server.
none (1) - neither authentication nor
accounting
authAndAcct (2) - both authentication and
accounting
authOnly (3) - only for authentication
acctOnly (4) - only for accounting."
DEFVAL { authAndAcct }
::= { crRadiusServerEntry 8 }
crRadiusServerRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Status of this row."
::= { crRadiusServerEntry 9 }
crRadiusServerRTTThldNorm OBJECT-TYPE
SYNTAX CiscoRadiusRoundTripTimePercent
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the normal threshold on the
round-trip time of RADIUS authentication messages. This is
measured as a percentage of configured round-trip time as per
RFC-2865. If the round-trip time is less than or equal to this
threshold, the agent generates the crRadiusServerRTTNormNotif
notification. The value configured through this object should
never be greater than that configured through
crRadiusServerRTTThldHi."
::= { crRadiusServerEntry 10 }
crRadiusServerRTTThldHi OBJECT-TYPE
SYNTAX CiscoRadiusRoundTripTimePercent
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the high threshold on the round-trip
time of RADIUS authentication messages. This is measured as a
percentage of configured round-trip time as per RFC-2865. If the
round-trip time is greater than or equal to this threshold, the
agent generates the crRadiusServerRTTHiNotif notification. The
value configured through this object should never be smaller
than that configured through crRadiusServerRTTThldNorm."
::= { crRadiusServerEntry 11 }
crRadiusServerRetransThldNorm OBJECT-TYPE
SYNTAX CiscoRadiusRetransPercent
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the normal threshold on the
retransmitted RADIUS authentication messages per session. This
is measured as a percentage of crRadiusRetransmits. If the
number of retransmits is less than or equal to this threshold,
the agent generates the crRadiusServerRetransNormNotif
notification. The value configured through this object should
never be greater than that configured through
crRadiusServerRetransThldHi."
::= { crRadiusServerEntry 12 }
crRadiusServerRetransThldHi OBJECT-TYPE
SYNTAX CiscoRadiusRetransPercent
UNITS "percent"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object represents the high threshold on the retransmitted
RADIUS authentication messages per session. This is measured as
a percentage of crRadiusRetransmits. If the number of
retransmits is greater than or equal to this threshold, the
agent generates the crRadiusServerRetransHiNotif notification.
The value configured through this object should never be smaller
than that configured through crRadiusServerRetransThldNorm."
::= { crRadiusServerEntry 13 }
crRadiusVlanAssignmentEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies if VLANs will be assigned by RADIUS server
via the tunnel attribute during the authentication."
::= { crRadiusVlanConfigGroup 1 }
crVlanGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF CrVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table containing VLAN Group Mapping information for the
purpose of distributing users across multiple VLANs which
have the same group name."
::= { crRadiusVlanConfigGroup 2 }
crVlanGroupEntry OBJECT-TYPE
SYNTAX CrVlanGroupEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing an VLAN Group Mapping information
applicable to a particular VLAN. Entries in this table can
be created or deleted using cpaeVlanGroupRowStatus object."
INDEX { crVlanGroupName }
::= { crVlanGroupTable 1 }
CrVlanGroupEntry ::= SEQUENCE {
crVlanGroupName SnmpAdminString,
crVlanGroupVlansLow OCTET STRING,
crVlanGroupVlansHigh OCTET STRING,
crVlanGroupRowStatus RowStatus
}
crVlanGroupName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies the name of the VLAN group."
::= { crVlanGroupEntry 1 }
crVlanGroupVlansLow OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANs
with VlanIndex value of 0 to 2047.
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 0 through
7, the second octet specifying VLANs 8 through 15, etc.
Within each octet, the most significant bit represents
the lowest numbered VLAN, and the least significant bit
represents the highest numbered VLAN. Thus, each VLAN
of the device is represented by a single bit within
the value of this object. If that bit has a value of
'1' then that VLAN is included in the group; the VLAN
is not mapped to the group if its bit has a value of
'0'."
::= { crVlanGroupEntry 2 }
crVlanGroupVlansHigh OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..256))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A string of octets containing one bit per VLAN for VLANs
with VlanIndex value of 2048 to 4095.
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2048 through
2055, the second octet specifying VLANs 2056 through 2063,
etc. Within each octet, the most significant bit represents
the lowest numbered VLAN, and the least significant bit
represents the highest numbered VLAN. Thus, each VLAN
of the device is represented by a single bit within
the value of this object. If that bit has a value of
'1' then that VLAN is included in the group; the VLAN
is not mapped to the group if its bit has a value of
'0'."
::= { crVlanGroupEntry 3 }
crVlanGroupRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object is used to manage the creation and deletion
of rows in this table.
The only way to create an entry is by setting the value
createAndGo(4), and the only way to delete an entry is by
setting the value destroy(6) to this object."
::= { crVlanGroupEntry 4 }
-- RADIUS keep-alive Group
--
-- RADIUS keep-alive feature provides RADIUS tracking configuration.
-- With RADIUS keep-alive feature enabled, a tracking message is sent to
-- every configured RADIUS servers after every keep-alive timer to
-- query the status of the servers.
crRadiusKeepAliveEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether RADIUS keep-alive feature is
enabled or not."
::= { crRadiusKeepAliveConfig 1 }
crRadiusKeepAliveInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the RADIUS keep-alive interval value. When the
object value of crRadiusKeepAliveEnabled is 'true',
a tracking message is sent to every configured RADIUS
server at the interval of crRadiusKeepAliveInterval to
query the status of the server."
::= { crRadiusKeepAliveConfig 2 }
crRadiusKeepAliveServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CrRadiusKeepAliveServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the keep-alive information on
every RADIUS server configured on the system."
::= { crRadiusKeepAliveConfig 3 }
crRadiusKeepAliveServerEntry OBJECT-TYPE
SYNTAX CrRadiusKeepAliveServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry containing keep-alive information of a
corresponding RADIUS server configured in
crRadiusServerTable."
INDEX { crRadiusServerIndex }
::= { crRadiusKeepAliveServerTable 1 }
CrRadiusKeepAliveServerEntry ::= SEQUENCE {
crRadiusKeepAliveServerStatus INTEGER
}
crRadiusKeepAliveServerStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
init(2),
active(3),
checkup(4),
dead(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the current keep-alive status of the RADIUS server.
other : none of the following.
init : the server is in init state.
active : the server is in active state.
checkup: the server is in checkup state.
dead : the server is in dead state.
This object is only instantiated when the corresponding
instance value of crRadiusServerRowStatus is 'active' and
the object value of crRadiusKeepAliveEnabled is 'true'."
::= { crRadiusKeepAliveServerEntry 1 }
crRadiusPortAutoInitialize OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies whether a port's state machines will be re-
initialized if their state machines are in 'aaaFail'
when a RADIUS server becomes available."
::= { crRadiusKeepAliveConfig 4 }
crRadiusKeepAliveUserName OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the user name used in keep-alive communication
with RADIUS server."
::= { crRadiusKeepAliveConfig 5 }
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- The RADIUS Server Notif Control Group
--
-- This group of objects controls the sending of
-- RADIUS Server Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++
crRadiusServerRTTNormNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control the generation of
crRadiusServerRTTNormNotif notification. A value of 'true'
indicates that the notification will be generated when the
current server round-trip time is less than or equal to
crRadiusServerRTTThldNorm."
DEFVAL { false }
::= { crRadiusServerNotifCntl 1 }
crRadiusServerRTTHiNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control the generation of
crRadiusServerRTTHiNotif notification. A value of 'true'
indicates that the notification will be generated when the
current server round-trip time is greater than or equal to
crRadiusServerRTTThldHi."
DEFVAL { false }
::= { crRadiusServerNotifCntl 2 }
crRadiusServerRetransNormNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control the generation of
crRadiusServerRetransNormNotif notification. A value of 'true'
indicates that the notification will be generated when the
current number of server retransmissions are less than or
equal to crRadiusServerRetransThldNorm."
DEFVAL { false }
::= { crRadiusServerNotifCntl 3 }
crRadiusServerRetransHiNotifEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to control the generation of
crRadiusServerRetransHiNotif notification. A value of 'true'
indicates that the notification will be generated when the
current number of server retransmissions are greater than or
equal to crRadiusServerRetransThldHi."
DEFVAL { false }
::= { crRadiusServerNotifCntl 4 }
crRadiusServerRTTNormNotif NOTIFICATION-TYPE
OBJECTS {
crRadiusServerRTTThldNorm,
crRadiusServerAddr,
crRadiusServerAuthPort
}
STATUS current
DESCRIPTION
"This notification indicates that the current server round-trip
time is less than or equal to crRadiusServerRTTThldNorm. Once
sent, this notification will be disarmed until the round-trip
time exceeds the value configured through
crRadiusServerRTTThldHi."
::= { ciscoRadiusMIBNotifications 1 }
crRadiusServerRTTHiNotif NOTIFICATION-TYPE
OBJECTS {
crRadiusServerRTTThldHi,
crRadiusServerAddr,
crRadiusServerAuthPort
}
STATUS current
DESCRIPTION
"This notification indicates that the current server round-trip
time is greater than or equal to crRadiusServerRTTThldHi. Once
sent, this notification will be disarmed until the round-trip
time falls below the value configured through
crRadiusServerRTTThldNorm."
::= { ciscoRadiusMIBNotifications 2 }
crRadiusServerRetransNormNotif NOTIFICATION-TYPE
OBJECTS {
crRadiusServerRetransThldNorm,
crRadiusServerAddr,
crRadiusServerAuthPort
}
STATUS current
DESCRIPTION
"This notification indicates that the current number of server
retransmissions are less than or equal to
crRadiusServerRetransThldNorm. Once sent, this notification will
be disarmed until the number of retransmissions exceed the value
configured through crRadiusServerRetransThldHi."
::= { ciscoRadiusMIBNotifications 3 }
crRadiusServerRetransHiNotif NOTIFICATION-TYPE
OBJECTS {
crRadiusServerRetransThldHi,
crRadiusServerAddr,
crRadiusServerAuthPort
}
STATUS current
DESCRIPTION
"This notification indicates that the current number of server
retransmissions are greater than or equal to
crRadiusServerRetransThldHi. Once sent, this notification will
be disarmed until the number of retransmissions falls below the
value configured through crRadiusServerRetransThldNorm."
::= { ciscoRadiusMIBNotifications 4 }
-- Conformance
ciscoRadiusMIBCompliances OBJECT IDENTIFIER
::= { ciscoRadiusMIBConformance 1 }
ciscoRadiusMIBGroups OBJECT IDENTIFIER
::= { ciscoRadiusMIBConformance 2 }
ciscoRadiusMIBCompliance MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-RADIUS-MIB."
MODULE -- this module
MANDATORY-GROUPS { crmConfigurationGroup }
OBJECT crRadiusTimeout
SYNTAX TimeIntervalSec (1..60)
DESCRIPTION
"Only the range 1-60 needs to be supported."
OBJECT crRadiusRetransmits
SYNTAX Unsigned32 (0..5)
DESCRIPTION
"Only the range 0-5 needs to be supported."
OBJECT crRadiusServerAddrType
SYNTAX INTEGER {
ipv4(1),
dns(16)
}
DESCRIPTION
"Only dns and ipv4 addresses are needed to be supported."
OBJECT crRadiusServerRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are needed to be
supported."
OBJECT crRadiusDeadtime
MIN-ACCESS read-only
DESCRIPTION
"Only read-only access is needed to be implemented."
::= { ciscoRadiusMIBCompliances 1 }
ciscoRadiusMIBCompliance2 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-RADIUS-MIB."
MODULE -- this module
MANDATORY-GROUPS { crmConfigurationGroup }
GROUP crmAttributesGroup
DESCRIPTION
"This group is mandatory only in implementation
which support RADIUS attribute configuration."
GROUP crmKeepAliveGroup
DESCRIPTION
"This group is mandatory only for implementation
which supports RADIUS keep-alive feature."
GROUP crmAutoInitializeConfigGroup
DESCRIPTION
"This group is mandatory only for implementation
which supports RADIUS port auto initialization."
GROUP crmAttributesGroup2
DESCRIPTION
"This group is mandatory only in implementation
which support additional RADIUS attribute
configuration."
OBJECT crRadiusTimeout
SYNTAX TimeIntervalSec (1..60)
DESCRIPTION
"Only the range 1-60 needs to be supported."
OBJECT crRadiusRetransmits
SYNTAX Unsigned32 (0..5)
DESCRIPTION
"Only the range 0-5 needs to be supported."
OBJECT crRadiusServerAddrType
SYNTAX INTEGER {
ipv4(1),
dns(16)
}
DESCRIPTION
"Only dns and ipv4 addresses are needed to be supported."
OBJECT crRadiusServerRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are needed to be
supported."
OBJECT crRadiusDeadtime
MIN-ACCESS read-only
DESCRIPTION
"Only read-only access is needed to be implemented."
::= { ciscoRadiusMIBCompliances 2 }
ciscoRadiusMIBCompliance3 MODULE-COMPLIANCE
STATUS deprecated
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-RADIUS-MIB."
MODULE -- this module
MANDATORY-GROUPS { crmConfigurationGroup }
GROUP crmAttributesGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS attribute configuration."
GROUP crmKeepAliveGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS keep-alive feature."
GROUP crmAutoInitializeConfigGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS port auto initialization."
GROUP crmAttributesGroup2
DESCRIPTION
"This group is mandatory only in implementation
which supports additional RADIUS attribute
configuration."
GROUP crmVlanConfigGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS VLAN assignment configuration."
GROUP crmRadiusKeepAliveUserGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS keep-alive user configuration."
OBJECT crRadiusTimeout
SYNTAX TimeIntervalSec (1..60)
DESCRIPTION
"Only the range 1-60 needs to be supported."
OBJECT crRadiusRetransmits
SYNTAX Unsigned32 (0..5)
DESCRIPTION
"Only the range 0-5 needs to be supported."
OBJECT crRadiusServerAddrType
SYNTAX INTEGER {
ipv4(1),
dns(16)
}
DESCRIPTION
"Only dns and ipv4 addresses are needed to be supported."
OBJECT crRadiusServerRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are needed to be
supported."
OBJECT crRadiusDeadtime
MIN-ACCESS read-only
DESCRIPTION
"Only read-only access is needed to be implemented."
::= { ciscoRadiusMIBCompliances 3 }
ciscoRadiusMIBCompliance4 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for entities which implement the
CISCO-RADIUS-MIB."
MODULE -- this module
MANDATORY-GROUPS {
crmConfigurationGroup,
crmConfigurationGroupSup1,
crmRadiusServerNotifGroup,
crmRadiusServerNotifCntlGroup
}
GROUP crmAttributesGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS attribute configuration."
GROUP crmKeepAliveGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS keep-alive feature."
GROUP crmAutoInitializeConfigGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS port auto initialization."
GROUP crmAttributesGroup2
DESCRIPTION
"This group is mandatory only in implementation
which supports additional RADIUS attribute
configuration."
GROUP crmVlanConfigGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS VLAN assignment configuration."
GROUP crmRadiusKeepAliveUserGroup
DESCRIPTION
"This group is mandatory only in implementation
which supports RADIUS keep-alive user configuration."
OBJECT crRadiusTimeout
SYNTAX TimeIntervalSec (1..60)
DESCRIPTION
"Only the range 1-60 needs to be supported."
OBJECT crRadiusRetransmits
SYNTAX Unsigned32 (0..5)
DESCRIPTION
"Only the range 0-5 needs to be supported."
OBJECT crRadiusServerAddrType
SYNTAX INTEGER {
ipv4(1),
dns(16)
}
DESCRIPTION
"Only dns and ipv4 addresses are needed to be supported."
OBJECT crRadiusServerRowStatus
SYNTAX INTEGER {
active(1),
createAndGo(4),
destroy(6)
}
DESCRIPTION
"Only 'active', 'createAndGo' and 'destroy' are needed to be
supported."
OBJECT crRadiusDeadtime
MIN-ACCESS read-only
DESCRIPTION
"Only read-only access is needed to be implemented."
::= { ciscoRadiusMIBCompliances 4 }
-- Units of Conformance
crmConfigurationGroup OBJECT-GROUP
OBJECTS {
crRadiusLoginAuthentication,
crRadiusAuthKey,
crRadiusTimeout,
crRadiusRetransmits,
crRadiusDeadtime,
crRadiusAccountingLogMaxSize,
crRadiusAccountingMethod,
crRadiusServerTableMaxEntries,
crRadiusServerAddrType,
crRadiusServerAddr,
crRadiusServerAuthPort,
crRadiusServerAcctPort,
crRadiusServerKey,
crRadiusServerType,
crRadiusServerMode,
crRadiusServerRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for RADIUS configuration."
::= { ciscoRadiusMIBGroups 1 }
crmAttributesGroup OBJECT-GROUP
OBJECTS { crRadiusFramedIpAddrIncluded }
STATUS current
DESCRIPTION
"A collection of objects for RADIUS attributes
configuration."
::= { ciscoRadiusMIBGroups 2 }
crmVlanConfigGroup OBJECT-GROUP
OBJECTS {
crRadiusVlanAssignmentEnabled,
crVlanGroupVlansLow,
crVlanGroupVlansHigh,
crVlanGroupRowStatus
}
STATUS current
DESCRIPTION
"A collection of objects for RADIUS Vlans assignment
configuration."
::= { ciscoRadiusMIBGroups 3 }
crmKeepAliveGroup OBJECT-GROUP
OBJECTS {
crRadiusKeepAliveEnabled,
crRadiusKeepAliveInterval,
crRadiusKeepAliveServerStatus
}
STATUS current
DESCRIPTION
"A collection of objects for RADIUS keep-alive
information."
::= { ciscoRadiusMIBGroups 4 }
crmAutoInitializeConfigGroup OBJECT-GROUP
OBJECTS { crRadiusPortAutoInitialize }
STATUS current
DESCRIPTION
"A collection of objects for RADIUS auto initialize
configuration."
::= { ciscoRadiusMIBGroups 5 }
crmAttributesGroup2 OBJECT-GROUP
OBJECTS { crRadiusFramedMtu }
STATUS current
DESCRIPTION
"A collection of additional objects for RADIUS
attributes configuration."
::= { ciscoRadiusMIBGroups 6 }
crmRadiusKeepAliveUserGroup OBJECT-GROUP
OBJECTS { crRadiusKeepAliveUserName }
STATUS current
DESCRIPTION
"A collection of objects for RADIUS keep-alive
user configuration."
::= { ciscoRadiusMIBGroups 7 }
crmRadiusServerNotifGroup NOTIFICATION-GROUP
NOTIFICATIONS {
crRadiusServerRTTNormNotif,
crRadiusServerRTTHiNotif,
crRadiusServerRetransNormNotif,
crRadiusServerRetransHiNotif
}
STATUS current
DESCRIPTION
"This collection of notifications is used to monitor the
responsiveness of the RADIUS server."
::= { ciscoRadiusMIBGroups 8 }
crmConfigurationGroupSup1 OBJECT-GROUP
OBJECTS {
crRadiusServerRTTThldNorm,
crRadiusServerRTTThldHi,
crRadiusServerRetransThldNorm,
crRadiusServerRetransThldHi
}
STATUS current
DESCRIPTION
"This group supplements crmConfigurationGroup, to
configure the thresholds on the round-trip times and
retransmission counts."
::= { ciscoRadiusMIBGroups 9 }
crmRadiusServerNotifCntlGroup OBJECT-GROUP
OBJECTS {
crRadiusServerRTTNormNotifEnable,
crRadiusServerRTTHiNotifEnable,
crRadiusServerRetransNormNotifEnable,
crRadiusServerRetransHiNotifEnable
}
STATUS current
DESCRIPTION
"This collection of objects control the generation of
notifications related to RADIUS server."
::= { ciscoRadiusMIBGroups 10 }
END
Reference in New Issue View Git Blame Copy Permalink